dexion speedframe construction kit - bristol storage
DESCRIPTION
Dexion construction kit resource on Dexion speedframe pallet racking and shelving from Bristol Storage Equipment. Bristol Storage is official supplier of Dexion storage equipment to businesses across the South West and Wales, including Somerset, Gloucestershire, Worcestershire, Wiltshire, Dornwall, Devon, Cardiff and Swansea. Providing Dexion pallet racking, mobile and archive shelving and partitioning, they deliver and install in Bristol, Exeter, Cheltenham, Gloucester, Tewkesbury, Barnstaple, Swindon and Stroud. As well as supplying storage solutions, they offer maintenance and aftercare, providing both the racking safety checks and repairs.TRANSCRIPT
Speedframe Construction Kit
The speedy way to be individual
Plan it... Cut it... Build it... Use it... Adapt it...
A400
1 ©
Dex
ion
01/0
9
Speedframe data sheet.indd 3 27/1/09 08:16:34
Dexion Comino LtdOak Tree HouseWaterside Hanbury Road Stoke Prior Bromsgrove B6O 4FD United Kingdom
T: +44 (0)870 2240 220F: +44 (0)870 2240 [email protected]
Speedframe is the no-fuss way to build strong frameworks. Simply cut the tube to length and tap in the joints for a smooth, snag-free structure. Add a few accessories and the framework becomes a bench, a trolley or display stand - all made to measure. Speedframe allows you to design and build your own frameworks, or if you prefer we can prefabricate the units for you and assemble them on site. Put your ideas to the test with Speedframe.
• Speedframe is the simple solution for purpose made benches, trollies, display stands and a host of other items
• 25mm steel tube available in black or grey plus an alloy option
• Standard tube length 3048mm - other sizes to order
• Separate inserts mean that the connector joints can be reused
• Full range of accessories available
Plan it... Cut it... Build it... Use it... Adapt it...
Three simple steps . . .
Step 1 Step 2 Step 3
Make a sketch of the item you need and cut the tube to the required lengths
A400
1 ©
Dex
ion
01/0
9
A joint for every type of corner Accessories
Dexion Comino LtdOak Tree HouseWaterside Hanbury Road Stoke Prior Bromsgrove B6O 4FD United Kingdom
T: +44 (0)870 2240 220F: +44 (0)870 2240 [email protected]
Speedframe is the no-fuss way to build strong,
good-looking frameworks. Just cut the tube
to length and tap in the joints for a smooth, snag
free structure. Add a few accessories and the
framework becomes a bench, a trolley, a display
stand or a test rig -all made to measure, to be
just what you want it to be.
You can buy the materials and do-it-yourself from
start to finish, or your local Dexion Centre will
supply the materials cut to size for you to
assemble. We can even prefabricate the units for
you in our workshops and assemble them on site
for you, if that's what you want. Put your ideas to
work fast with Speedframe.
Speedframe is idealfor purpose madebenches.
Plan it... Cut it... It’s always best tomake a simple sketchbefore you start.Mark the tube lengthson the diagram – allow29mm for each joint.
When cutting tube startwith the longest lengths toensure best economy. Tubecan be cut with a hacksaw. A Speedframe trimmingblock screwed to a firmsurface will help you tomake accurate cuts.
Trimming block
Speedframe is the no-fuss way to build strong frameworks. Simply cut the tube to length and tap in the joints for a smooth, snag-free structure. Add a few accessories and the framework becomes a bench, a trolley or display stand - all made to measure. Speedframe allows you to design, buy and build your own frameworks, or if you prefer we can prefabricate the units for you and assemble them on site. Put your ideas to the test with Speedframe.
• Speedframe is ideal for purpose made benches, trollies or display stands
• Joints, adjustable shelf supports,
castors, foot plate and adjustable feet
• Cladding or glazing sections for fi tting to framework
Start with the longest lengths fi rst to ensure best economy. Tubes can be cut with a hacksaw.
Plan it... Cut it... Build it... Use it... Adapt it...
T h e s p e e d y w
Mark the joints required on the diagram. Choose
hard black inserts for rigid or permanent
structures, soft white inserts for temporary
structures. Push insert fully into the tube before
pushing in the arm of the joint. Hammer the joint
home using the white face of a Speedframe
hammer. Never use a metal hammer.
Build it...Shelf supports for cornersof frameworks. Fitted overspigot of joint beforehammering into tube.
Double shelf support
Plastic shelf spacer, pack
of 48 (each spacer is
3mm to allow shelves to
fit flush with tube).
Plastic shelf spacer
Single shelf support
Push an insert into the end of the tube and then a joint into the insert.
Hammer the jointhome to create asolid structure.
It’s simple to construct and by using a white faced hammer, the joints are easy to assemble.
Robust, purpose made desks - made to fi t within the offi ce space.
a y t o b e i n d i v i d u a l
Use it... Adapt
Always use a soft faced hammer forassembling frameworks. One face softPVC, for fitting accessories such as plastic caps or adjustable feet. Theother face hard nylon, for knockingjoints into tube.
Adjustable footsimply taps intobottom of tube.
Flange allowsfloor, wall orceiling fixing as needed.
Anchor plate used to fixtube to flat surfaces
Plug fitting furniture castor
Heavy duty castor
Desks can be made with Speedframe, just add castors or adjustable feet.
Make a simple sketch before you start, mark the tube lengths, allow 29mm for each joint, cut to required sizes. Choose hard black inserts for rigid or permament structures, soft white inserts for temporary structures.
Ensure inserts are fully into the tube before pushing in the arm of the joint. Make up the frames fi rst, then join with the uprights. If cladding is being used, add as the sections are built up. Glass is fi tted when the unit is complete.
A400
1 ©
Dex
ion
09/0
8
Speedframe data sheet.indd 2 1/10/08 13:18:52
Dexion Comino LtdOak Tree HouseWaterside Hanbury Road Stoke Prior Bromsgrove B6O 4FD United Kingdom
T: +44 (0)870 2240 220F: +44 (0)870 2240 [email protected]
Speedframe is the no-fuss way to build strong,
good-looking frameworks. Just cut the tube
to length and tap in the joints for a smooth, snag
free structure. Add a few accessories and the
framework becomes a bench, a trolley, a display
stand or a test rig -all made to measure, to be
just what you want it to be.
You can buy the materials and do-it-yourself from
start to finish, or your local Dexion Centre will
supply the materials cut to size for you to
assemble. We can even prefabricate the units for
you in our workshops and assemble them on site
for you, if that's what you want. Put your ideas to
work fast with Speedframe.
Speedframe is idealfor purpose madebenches.
Plan it... Cut it... It’s always best tomake a simple sketchbefore you start.Mark the tube lengthson the diagram – allow29mm for each joint.
When cutting tube startwith the longest lengths toensure best economy. Tubecan be cut with a hacksaw. A Speedframe trimmingblock screwed to a firmsurface will help you tomake accurate cuts.
Trimming block
Speedframe is the no-fuss way to build strong frameworks. Simply cut the tube to length and tap in the joints for a smooth, snag-free structure. Add a few accessories and the framework becomes a bench, a trolley or display stand - all made to measure. Speedframe allows you to design, buy and build your own frameworks, or if you prefer we can prefabricate the units for you and assemble them on site. Put your ideas to the test with Speedframe.
• Speedframe is ideal for purpose made benches, trollies or display stands
• Joints, adjustable shelf supports,
castors, foot plate and adjustable feet
• Cladding or glazing sections for fi tting to framework
Start with the longest lengths fi rst to ensure best economy. Tubes can be cut with a hacksaw.
Plan it... Cut it... Build it... Use it... Adapt it...
T h e s p e e d y w
Mark the joints required on the diagram. Choose
hard black inserts for rigid or permanent
structures, soft white inserts for temporary
structures. Push insert fully into the tube before
pushing in the arm of the joint. Hammer the joint
home using the white face of a Speedframe
hammer. Never use a metal hammer.
Build it...Shelf supports for cornersof frameworks. Fitted overspigot of joint beforehammering into tube.
Double shelf support
Plastic shelf spacer, pack
of 48 (each spacer is
3mm to allow shelves to
fit flush with tube).
Plastic shelf spacer
Single shelf support
Push an insert into the end of the tube and then a joint into the insert.
Hammer the jointhome to create asolid structure.
It’s simple to construct and by using a white faced hammer, the joints are easy to assemble.
Robust, purpose made desks - made to fi t within the offi ce space.
a y t o b e i n d i v i d u a l
Use it... Adapt
Always use a soft faced hammer forassembling frameworks. One face softPVC, for fitting accessories such as plastic caps or adjustable feet. Theother face hard nylon, for knockingjoints into tube.
Adjustable footsimply taps intobottom of tube.
Flange allowsfloor, wall orceiling fixing as needed.
Anchor plate used to fixtube to flat surfaces
Plug fitting furniture castor
Heavy duty castor
Desks can be made with Speedframe, just add castors or adjustable feet.
Make a simple sketch before you start, mark the tube lengths, allow 29mm for each joint, cut to required sizes. Choose hard black inserts for rigid or permament structures, soft white inserts for temporary structures.
Ensure inserts are fully into the tube before pushing in the arm of the joint. Make up the frames fi rst, then join with the uprights. If cladding is being used, add as the sections are built up. Glass is fi tted when the unit is complete.
A400
1 ©
Dex
ion
09/0
8
Speedframe data sheet.indd 2 1/10/08 13:18:52
Fit the corner joints and any accessories
Complete your design
2-way joint 3-way joint 3-way corner Double shelf Single shelf Removable shelf joint support support support
4-way corner 4-way joint 5-way corner Adjustable foot Wheel foot Cladding and joint joint glazing extrusions
6-way corner Black, White or Hammer End caps - plastic Plastic shelf spacer Anchor platejoint Clear Inserts or metal
Speedframe data sheet.indd 2 27/1/09 08:17:16