dextr desking system - maxon furniture · 2019. 7. 26. · kingswood walnut ki ... moonstone ref23...

DeXTR™ Desking SystemGSA SIN 711-2

DeXTR

REFERENCE

1|

DeXTR™ Desking SystemDeXTR gets its name from its dexterity - the ability to use space skillfully. With the modern design, mixed material options, footed storage as well as supporting open O-leg, full laminate or slanted leg design, that help achieve aesthetic scaling.

DeXTR provides a portfolio of modular options that inspires designers to rethink how the private office can be created to address today’s needs and even serve more than one purpose.

Offices may be getting smaller, but they also need to remain functional, especially when the workplace is continually changing. DeXTR provides a versatile office platform that can change with time. One that can easily expand and compress over time to fit the ever-evolving space.

SU

RPAS

S

De

XTR

RE

FERE

NCE

DeXTR™ Desking System GSA SIN 711-2

2 |

Finishes and Textiles .....................................................................4-8Statement of Line .......................................................................9-10Specification Guide ...................................................................11-15Worksurfaces

Rectangular ...........................................................................16-17Supports ...............................................................................18-25

StoragePedestals ....................................................................................26Lateral Files ................................................................................27Cabinet ......................................................................................27Bookcases ..................................................................................27Towers ..................................................................................28-29Credenzas .............................................................................30-31

Modesty Panels ........................................................................32-33Screens .....................................................................................34-36Overheads ................................................................................37-38Hutches and Accessories ..........................................................39-40Electrical ........................................................................................41

DeXTR

REFERENCEDeXTR™ Desking SystemGSA SIN 711-2

3|

TypicalsPlease refer to our typicals gallery for all Maxon systems. www.maxonfurniture.com/design-resources/typicals. Here you can download Cad files, BOM's with current pricing and PDF's of each drawing. Each month we add new ideas to support industry trends.

Use the Maxon Typicals Gallery to find the components in DeXTR workstations:30

x724028

LM

24x48

24EPS 24EPS

24EPS

FB24

FB24

72DB

24x72M-SEMU503

72TE

24x24x65H PSTLF

31AS

30x72

30x28-O

30x28-O

20x72x21.5H

24x72M-SEMO20124x28-O

24x28-O

72LS

72SSC72

54L F

loat SC72

65OS

65OS

SU

RPAS

S

De

XTR

RE

FERE

NCE


4 |

DeXTR Finishes Chart

Wor

ksur

face

s

End

Pane

ls,

Stor

age

and

Mod

esty

Pa

nels

L1 LAMINATES CODES

Woo

dgra

in

Bourbon Cherry H • •Cognac COGN • •Florence Walnut LFW1 • •Harvest C • •Kingswood Walnut LKI1 • •Mocha MOCH • •Natural Maple D • •Pinnacle PINC • •Shaker Cherry F • •

Solid

Designer White LDW1 • •Flint LM16 • •Fossil Shale LEH1 •Loft LOFT • •Titanium LTI1 •

Patte

rn Sheer Mesh* LT8B •

Silver Mesh* LT8D •

L2 LAMINATES CODES

Woo

dgra

in

Amber Cherry LWAC •Beigewood LWBE •Columbian Walnut LWZ •Lowell Ash LLA1 • •Natural Recon LNR1 • •Portico Teak LPT1 • •

*End Panels, Storage and Modesty Panels come with matching edgeband

Legs

and

Br

acke

ts

Stor

age

Pulls

an

d Fe

et

Pow

er P

ole

PAINTS CODES

P1

Black MPBL • • •Brownstone MP7D • •Designer White PJW • • •Flint MP02 • •Fossil P28 •Greige MPT5 • •Loft MP7B • •Muslin MPT3 • •Titanium P8T •

P2

Champagne MPR5 • • •Gunmetal MPR3 • •Platinum MPPL • • •Silver PR6 • •

Wor

ksur

face

s

EDGEBAND CODES

Woo

dgra

in

Amber Cherry DA •Beigewood DE •Bourbon Cherry H •Cognac COGN •Columbian Walnut DZ •Florence Walnut FW •Harvest C •Kingswood Walnut KI •Lowell Ash DL •Mocha MOCH •Natural Maple D •Natural Recon NR •Pinnacle PINC •Portico Teak DP •Shaker Cherry F •

Solid

Black E4 •Brownstone EY •Designer White DW •Flint E9 •Fossil EHGreige R •Loft EV •Muslin EU •Platinum K •Titanium TI

Roun

d G

rom

met

sPlastics CODES

P1

Black E4 •Brownstone EY •Designer White DW •Flint E9 •Fossil EH •Loft EV •Muslin EU •Titanium TI •

DeXTR


5|

Grade A Fabric OptionsGrade A

Family Color Railroad Code

Appoint

Artichoke APN11Blackberry APN32

Bronze APN22Carbon APN28

Chai APN12Cherry APN30Copper APN18 D

Dark Pewter APN17Dune APN15

Espresso APN23Framboise APN31

Frost APN34Hummus APN14 D

Jet APN27Lawn APN25

Mandarin APN29Morel APN09

Nimbus APN16Platinum APN24Turmeric APN10 D

Turquoise APN26Walnut APN13 D

*Centurion

Apricot CU47Bark CU25Black CU10

Espresso CU49Fog CU03

Frost CU22Goldenrod CU27

Indigo CU06Iris CU50

Iron Ore CU19Jade CU83

Marsala CU63Morel CU24Navy CU98

Peacock CU97Pear CU84Ruby CU67

Sapphire CU09

Element

Flint GN65 D

Indigo GN67 D

Latte GN73 D

Millet GN72 D

Parchment GN53 D

Veil GN13 D

Warm Beige GN55 D

*Centurian Panel Fabric only available on panel heights below 54".

Grade A Continued


Etch

Aquatint ECH01 D

Axis ECH13Blend ECH14Cast ECH12

Crosshatch ECH04 D

Engrave ECH02 D

Highlight ECH10Intaglio ECH06 D

Lithograph ECH03 D

Mezzotint ECH07 D

Midtone ECH11Outline ECH08Shade ECH09Tonal ECH16

Vanish ECH15Woodcut ECH05 D

Landscape

Azure LN55Cornsilk LN15

Drift LN05Khaki LN20Maize LN40 D

Sheen LN10

Slate LN35Tangelo LN50 D

Tide LN45 D

Umber LN25

Urban LN30

Lucy

Aspen LC32Cornsilk LC30

Dusk LC22Fawn LC33

Graphite LC34Mist LC20

Neutra LC24Pewter LC35

Snowdrop LC28

Reflections

Galvanized REF29Ice REF20

Loggia REF21Mistral REF28

Moonstone REF23Pewter REF22

Stainless REF24Vanilla REF25Winter REF27

Grade A Continued


Refuge

Artesian RFG96Dune RFG92

Eclipse RFG90Frost RFG93

Glacier RFG91Hemp RFG97 D

Mineral RFG98Sandbar RFG95 D

Tidal RFG94

Sarto

Ash SRT88Desert SRT33 D

Fog SRT14Lemongrass SRT49

Meadow SRT25 D

Mist SRT45Mushroom SRT76

Oyster SRT18Reef SRT64

Sesame SRT93Shale SRT52

Wheat SRT13 D

Tempest

Dragonfly TP30Frost TP15

Full Stream TP80Ginger TP25 D

Gold Rush TP10Sandstorm TP50 D

Slate TP45Tumbleweed TP70

Wind Chill TP40Zebra TP35

• New Fabric Option D Discontinued December 31, 2019All Maxon fabric is Railroad Direction. D Discontinued June 30, 2019

SU

RPAS

S

De

XTR

RE

FERE

NCE


6 |

Grade B Fabric OptionsGrade B


Mica

Anthracite MCA11

Breeze MCA18

Bronze MCA13

Buff MCA14

Cremini MCA17

Crystal MCAWIT

Dew MCA20

Dove MCA12

Fresh MCA16

Mineral MCA15

Nectar MCA19

Shale MCA10

Spin

Alabaster SPIN02

Cavern SPIN03

Cobblestone SPIN04

Ember SPIN06

Flame SPIN07

Heron SPIN13

Oat SPIN01

Ocean SPIN12

Plum SPIN15

Pool SPIN11

Raven SPIN10

Rhubarb SPIN14

Tropic SPIN08

Willow SPIN05

Terrain

Bay TRRN05

Bayou TRRN35

Canyon TRRN30

Cliff TRRN45

Crest TRRN25

Delta TRRN10

Plateau TRRN15

Ridge TRRN20

Valley TRRN40

• New Fabric Option D Discontinued December 31, 2019All Maxon fabric is Railroad Direction.

DeXTR


7|

Grade 1 Seating/Upholstery OptionsUpholstery for Storage Cushions and Adept Seating

Grade 1 Upholstery

Family Color Code

Apex

Basalt APX25

Beet APX12

Blackberry APX20

Chive APX05

Iris APX03

Kiwi APX06

Lemonade APX08

Navy APX13

Papaya APX09

Pumice APX23

Rain APX19

Resort APX15

Royal APX14

Tiki APX29

Tomato APX11

Grade 1 Upholstery

Family Color Code

*Centurion

Apricot CU47

Bark CU25

Black CU10

Espresso CU49

Fog CU03

Frost CU22

Goldenrod CU27

Indigo CU06

Iris CU50

Iron Ore CU19

Jade CU83

Marsala CU63

Morel CU24

Navy CU98

Peacock CU97

Pear CU84

Ruby CU67

Sapphire CU09

*Available on M-SEMO201**Not Available on Adept Upholstered BackAll Maxon fabric is Railroad Direction.

Grade 1 Upholstery

Family Color Code

*/**Contourett

Baltic UR94

Beach UR23

Black UR10

Bordeaux UR63

Buff UR22

Cloud UR18

Coffee Bean UR49

Crater UR51

Flame UR62

Graphite UR19

Iron UR20

Luggage UR26

Marine UR92

Navy UR95

Nimbus UR93

Ocean UR96

Pumpkin UR42

Quarry UR24

Red UR64

Safari UR27

Sage UR82

Steel UR21

Storm UR17

Taupe UR28

Trunk UR50

Grade 1 Upholstery

Family Color Code

Inertia

Amethyst NR61

Calypso NR98

Cherry NR66

Cobalt NR91

Coffee NR49

Fog NR19

Fuchsia NR63

Gecko NR76

Glow NR27

Leaf NR75

Lime NR82

Loft NR22

Mandarin NR47

Meteor NR30

Mustard NR26

Nickel NR23

Onyx NR10

Regatta NR90

Shadow NR20

Surf NR96

Tangelo NR46

SU

RPAS

S

De

XTR

RE

FERE

NCE


8 |

Grade 2 Seating/Upholstery Textile OptionsUpholstery for Storage Cushions and Adept Seating

Grade 2 Upholstery

Family Color Code

AppointSeating

Blackberry PNS012

Bronze PNS002

Carbon PNS008

Cherry PNS010

Espresso PNS003

Framboise PNS011

Jet PNS007

Lawn PNS005

Mandarin PNS009

Morel PNS001

Platinum PNS004

Turquoise PNS006

Grade 2 Upholstery

Family Color Code

*Dotty

Candy DOT63

Gelato DOT34

Indigo DOT31

Onyx DOT35

Park DOT83

Peat DOT24

Peony DOT32

Suit DOT20

Sunflower DOT33

Tailor DOT21

Tide DOT90

Velum DOT29

Violet DOT30

*Available on M-SEMP201All Maxon fabric is Railroad Direction.

Grade 2 Upholstery

Family Color Code

Seed

Apple SED11

Ash SED15

Cardinal SED09

Cinder SED17

Cream SED12

Driftwood SED13

Harbor SED10

Onyx SED18

Smoke SED16

Truffle SED14

Grade 2 Upholstery

Family Color Code

SpinSeating

Alabaster SPNN02

Cavern SPNN03

Cobblestone SPNN04

Ember SPNN06

Flame SPNN07

Heron SPNN13

Oat SPNN01

Ocean SPNN12

Plum SPNN15

Pool SPNN11

Raven SPNN10

Rhubarb SPNN14

Tropic SPNN08

Willow SPNN05

DeXTR


9|

Rectangle and Knife Edge Worksurfaces

*

Steel Legs Laminate End Panel Support Post Leg

*

*

O-Leg Support

Laminate Support Storage

Laminate Storage

*

Laminate Towers

*

*

*Knife Edge Worksurfaces, Steel Leg, Steel Stanchion, and Footed Storage Coming soon

SU

RPAS

S

De

XTR

RE

FERE

NCE


10 |

Laminate Credenzas

*

*

*

*

Cushions Modesty Panels

Screens

Laminate Overheads Laminate Overhead Supports

Laminate Stack-on Storage

Accessories

Electrical

*Footed Storage coming soon

DeXTR


11|

Rectangular Edge Worksurface ∙ Standard models come with grommets. ∙ There is one Oval grommet on 36" W and

42" W worksurfaces. ∙ There are two Oval grommets on 48" W - 84" W worksurfaces. ∙ Add Suffix "N" to a model number for no grommets.

Knife Edge Worksurface ∙ Bottom of surface is 3" smaller in width and

depth than top of surface. ∙ Grommets are specified as a dot option. ∙ There is one 3" Round grommet on 36" W and

42" W worksurfaces. ∙ There are two 3" Round grommets on 48" W - 72" W

worksurfaces. ∙ Should not be connected to other surfaces.

Angled Steel Leg ∙ 281/2" High. ∙ Ships as set, which includes two Angled Steel Legs. ∙ Wire management built in. ∙ Can be used in combination with O-Legs.

4"H Steel Stanchion ∙ 4" High ∙ For use with DeXTR Low Credenzas. ∙ Ships as set, which includes two 4"H Steel

Stanchions. ∙ No glides on 4"H Steel Stanchion.

Post Leg ∙ 281/2" High x 2" Square. ∙ 7" Square Welded Mounting Plate. ∙ Cannot be used on primary worksurface with O-leg as

other support. ∙ Can only be used to support peninsula, not as primary

supports. ∙ Levelers provide 2" vertical adjustment.

Laminate End Panel Support ∙ 281/2" High x 16" Wide. ∙ Available 20", 24", and 30" Deep. ∙ Ships in two pieces. Non-handed. ∙ Specifying a 30"D support on a 36"D worksurface, there

will be a 6" overhang.

End Panel Support with Panel Bracket ∙ 291/2" High x 3/4" Wide. ∙ Available 24", and 30" Deep. ∙ Includes laminate end panel and brackets to attach end

panel support to a panel. ∙ Must be used with System Panel. Cannot be

freestanding. ∙ Handed - must specify Right or Left.

O-Legs ∙ 281/2" High, 2" Thick. ∙ Available 20", 24", 30" Deep. ∙ O-Legs are non-handed. ∙ Ships fully assembled with mounting hardware. ∙ Levelers provide 2" vertical adjustment. ∙ Modesties will not attach to O-Legs. ∙ 28"H Pedestals should not be specified next to O-Legs

due to the leg attaching brackets.

Shared O-Legs ∙ 281/2" High, 2" Thick. ∙ Available 12", 20", 24", 30" Deep. ∙ Spans two worksurfaces to provide support with the

look of a single O-Leg. ∙ 12" deep should be used in conjunction with a

Countertop Flat Bracket. ∙ 30" deep will have a 6" overhang when used with a

36"D worksurface. ∙ Modesties will not attach to O-Legs. ∙ Levelers provide 2" vertical adjustment.

Double Depth O-Legs ∙ 281/2" High, 2" Thick. ∙ Available 48", 60" Deep. ∙ For use in back-to-back applications. ∙ Modesties will not attach to O-Legs. ∙ Levelers provide 2" vertical adjustment.

Standing Height O-Legs ∙ 41" High, 2" Thick. ∙ Available 24", 30" Deep. ∙ Modesties and gussets will not attach to O-Legs. ∙ Levelers provide 2" vertical adjustment.

Shared Standing Height O-Legs ∙ 41" High, 2" Thick. ∙ Available 24", 30" Deep. ∙ Modesties will not attach to O-Legs. ∙ Levelers provide 2" vertical adjustment.

O-Leg and Shared O-Leg for Low Credenzas ∙ 7" High, 2" Thick. ∙ Available 20", 24", 30" Deep. ∙ For use with DeXTR Low Credenzas. ∙ No glides on O-Leg Stanchion.

O-Leg and Standing Height O-Leg to-Panel Attachment Bracket ∙ Used to connect O-Leg to a systems panel for

additional workstation rigidity. ∙ Brackets are handed, come one per package and

include self-tapping screws.

SU

RPAS

S

De

XTR

RE

FERE

NCE


12 |

Standing Height Laminate Support Side Access Storage Tower ∙ 50" High x 12" Wide. ∙ Available 24", and 30" Deep. ∙ Left and Right Handed. ∙ Tower includes coat hook on back of door. ∙ Case and Door Fronts can be specified in different finishes. ∙ Must use the worksurface to tower bracket kit model M-TB2W1 to

attach worksurfaces to the Storage Tower.Laminate Support Lateral ∙ 65"High x 24" Wide x 24" Deep. ∙ Ships with one handle per drawer. ∙ Drawer handles may be positioned on drawer fronts in

multiple pre-drilled locations. ∙ Case and Drawer Fronts can be specified in different finishes. ∙ File drawers accept hanging folders in letter or legal size. ∙ File and lateral drawers operate on ball-bearing suspension with

full extension. ∙ Adjustable hex leveling glides allow floor-standing furniture to be

easily leveled without lifting the unit. ∙ Glides have 11/4′′ adjustable range.

Laminate Support Pedestals ∙ 281/2" High x 16" Wide. ∙ Available 20", 24", and 30" Deep. ∙ Available in Box/Box/File, File/File and 2 Drawer

configurations. ∙ Top box drawer does not lock. ∙ Ships with one handle per drawer. ∙ Drawer handles may be positioned on drawer fronts

in multiple pre-drilled locations. ∙ 30" deep will have a 6" overhang when used with a

36"D worksurface. ∙ Case and Drawer Fronts can be specified in different

finishes. ∙ File drawers accept hanging folders in letter or legal size. ∙ Box drawers operate on ball-bearing suspension with full

extension. ∙ File drawers operate on ball-bearing suspension with full

extension. ∙ Adjustable hex leveling glides allow floor-standing furniture to be

easily leveled without lifting the unit. ∙ Glides have 11/4" adjustable range. ∙ Pedestals ship fully assembled but must attach to a worksurface

with a quick release bracket, provided. ∙ Pedestals are non-handed and are interchangeable.

Laminate Freestanding and Mobile Pedestals ∙ Mobile Pedestal 211/2" High x 16" Wide x 20" Deep. ∙ Freestanding Footed Pedestal 241/2" High x 16" Wide x

30" Deep. ∙ Available in Box/File configuration. ∙ Ships with one handle per drawer. ∙ Drawer handles may be positioned on drawer fronts

in multiple pre-drilled locations. ∙ Case and Drawer Fronts can be specified in different

finishes. ∙ File drawers accept hanging folders in letter or legal size. ∙ Box drawer operates on ball-bearing suspension with 70% extension. ∙ File drawer operates on ball-bearing suspension with 70% extension.

Laminate Storage Cabinet ∙ 291/2" High x 36" Wide x 24" Deep. ∙ Ships with one handle per door. ∙ Adjustable shelf. ∙ Case and Door Fronts can be specified in different

finishes. ∙ Adjustable hex leveling glides allow floor-standing furniture to be

easily leveled without lifting the unit. ∙ Glides have 11/4" adjustable range. ∙ Not to be used as worksurface support.

Laminate Towers ∙ Personal Towers 65" High x 24" Wide x 24" Deep. ∙ Side Access Towers 50" and 65" High x 24" Wide

x 18" and 24" Deep. ∙ Footed Side Access Towers 50" High x 24" Wide

x 18" and 24" Deep. ∙ Case and Door Fronts can be specified in different

finishes. ∙ Use the worksurface to tower bracket kit model

M-TB2W1 to attach worksurfaces to the Storage Towers.

∙ File drawers accept hanging folders in letter or legal size.

∙ Wardrobe, middle box drawer and file drawer are locking.

∙ Box drawers operate on ball-bearing suspension with full extension.

∙ File drawers operate on ball-bearing suspension with full extension. ∙ Ships with one handle per drawer on all units. ∙ Wardrobe/storage cabinet includes coat rod. ∙ Adjustable hex leveling glides allow floor-standing furniture to be

easily leveled without lifting the unit. ∙ Glides have 11/4" adjustable range.

Laminate Credenzas ∙ 211/2" High x 20" Deep. ∙ Open Credenzas 30" and 36"Wide. ∙ Open/Box/File Credenzas 60" and 72"Wide. ∙ Ships with one handle per drawer. ∙ Drawer handles may be positioned on drawer

fronts in multiple pre-drilled locations. ∙ Case and Drawer Fronts can be specified in

different finishes. ∙ File drawers accept hanging folders in letter or

legal size. ∙ File and lateral drawers operate on ball-bearing

suspension with full extension. ∙ Adjustable hex leveling glides allow floor-standing

furniture to be easily leveled without lifting the unit. ∙ Glides have 11/4" adjustable range. ∙ Fixed shelf. ∙ Footed Credenzas with drawers include counterweights. All others

configurations do not require counterweights.Laminate Lateral Files ∙ 2 Drawer Lateral 291/2" High x 36" Wide x 24" Deep. ∙ 4 Drawer Lateral 57" High x 36" Wide x 24" Deep. ∙ Ships with one handle per drawer. ∙ Drawer handles may be positioned on drawer fronts in

multiple pre-drilled locations. ∙ Case and Drawer Fronts can be specified in different

finishes. ∙ File drawers accept hanging folders in letter or

legal size. ∙ File and lateral drawers operate on ball-bearing

suspension with full extension. ∙ Adjustable hex leveling glides allow floor-standing

furniture to be easily leveled without lifting the unit.

∙ Glides have 11/4" adjustable range. ∙ Counterweight is included. ∙ Not to be used as worksurface support.

Laminate Bookcases ∙ 2 Shelf Bookcase 291/2" High x 36" Wide x 13" Deep. ∙ 3 Shelf Bookcase 57" High x 36" Wide x 13" Deep. ∙ 4 Shelf Bookcase 65" High x 36" Wide x 13" Deep. ∙ Adjustable glides allow bookcases to be easily leveled. ∙ Glides have 11/4" adjustable range. ∙ Not to be used as worksurface support.

DeXTR


13|

Laminate Full Width Modesty Panels ∙ Available 14", and 281/2" High. ∙ Available 28", 34" and 40" Wide. ∙ Full width laminate modesty panels are designed to

work with 60", 66", & 72" desks. ∙ Full height and half height laminate modesty panels

can only be used when specifying a pedestal and/or end panel supports.

Floating Modesty Panels ∙ Available 14" High. ∙ Available 30", 36", 42", 48" and 60" Wide. ∙ The attachment bracket and modesty panel are

packaged separately. ∙ 30" and 36" Wide come with four L-Brackets. ∙ 48" and 60" Wide come with external stiffener. ∙ When specifying 54"W or 60"W Laminate Floating

Modesty Panel, it is not necessary to specify an extra external support channel.

Fabric Return Privacy Screen ∙ Available 13" and 20" High. ∙ Available 20", 24", 30" and 36" Wide. ∙ Brackets are Platinum only. ∙ Attachment bracket extends 2.25" into top

of worksurface. ∙ Ships complete with attachment brackets. ∙ Attaches to top of worksurface with adhesive banding. ∙ Surfaces must be cleaned prior to adhering the screen and must

be left to cure for 24 hours without touching for best adhesion.

Fabric Above/Below Privacy Screens ∙ Available 35" High. ∙ Available 36", 42", 48", 54", 60", 66" and 72" Wide. ∙ Brackets are Platinum only. ∙ Privacy Screen extends 20" above and 13" below

the worksurface. ∙ Must be ordered the same width as the worksurface it is being

used with to properly attach. ∙ Can attach to worksurfaces that are either O-leg supported on

both sides, or worksurfaces that are supported by a support pedestal on one side and an O-leg on the other.

∙ They cannot be attached to worksurfaces supported by support pedestals or End Panels on both sides or Shared O-Legs.

Glass Above/Below Privacy Screens ∙ Available 28" High. ∙ Available 30", 36", 42", 48", 54" and 60" Wide. ∙ Privacy Screen extends 13" above and 13" below

the worksurface. ∙ Available in Frosted Acrylic only. ∙ Ships complete with attachment brackets. ∙ Attachment bracket extend 2" into the bottom of worksurface. ∙ Brackets are Platinum only. ∙ Can be used with Prepare Height-Adjustable Bases.

Glass Above Privacy Screen ∙ Available 13" High. ∙ Available 30", 36", 42", 48", 54" and 60" Wide. ∙ Frosted Glass Only. ∙ Brackets Platinum Only. ∙ Clamps onto worksurface and cannot be installed

where support storage will be attached. ∙ Cannot be specified on seam of surfaces that share a support

leg under the surface. ∙ Can be used with Prepare Height-Adjustable Bases.

Glass Return Privacy Screen ∙ Available 13" High. ∙ Available 20", 24", 30" and 36" Wide. ∙ Frosted Glass Only. ∙ Brackets are Platinum only. ∙ Ships complete with attachment brackets. ∙ Return Glass Screens are intended to be attached between

users sitting side-by-side but will create 1/8" spacing between the worksurfaces. Please consider creep if using in a panel-wrapped application.

∙ Return Glass Screens attach to top and edge of worksurface with adhesive banding.

∙ Surfaces must be cleaned prior to adhering the screen and must be left to cure for 24 hours without touching for best adhesion.

Stack-on Storage Sliding Doors ∙ 35"High x 141/4" Deep x 72" Wide. ∙ Case and Door Fronts can be specified in

different finishes. ∙ Ships complete with Back Enclosure and

Laminate End Panels. ∙ Ships factory assembled. ∙ Must be placed over two full-height supports. ∙ Cannot be placed over non-supported sections such as returns

using a flat bracket or tower-to-worksurface bracket. ∙ Sliding Doors do not lock.

Stack-on Storage Hinged Doors ∙ 35"High x 141/4" Deep x 72" Wide with 12"Cubbie. ∙ Case and Door Fronts can be specified in

different finishes. ∙ Ships complete with Back Enclosure and Laminate

End Panels. ∙ Ships factory assembled. ∙ Must be placed over two full-height supports. ∙ Cannot be placed over non-supported sections such as returns

using a flat bracket or tower-to-worksurface bracket. ∙ Hinged Doors do not lock.

Stack-on Storage Tackboard ∙ 18" High x 5/8" Deep. ∙ For use with 72"W Stack-on Storage. ∙ Stack-on Storage Tackboard attaches to Back

Enclosure with adhesive banding. ∙ Back Enclosure must be cleaned prior to adhering the

Tackboard and must be left to cure for 24 hours without touching for best adhesion.

SU

RPAS

S

De

XTR

RE

FERE

NCE


14 |

Sliding Door Overhead Cabinet ∙ 14" High x 141/4"" Deep. ∙ Available 36", 42", 48", 60", 66" and 72" Wide. ∙ Case and Door Fronts can be specified in different

finishes. ∙ Does not ship with a pull, door overhangs case to slide. ∙ Can be used as a wall mount, panel mount or stack-on storage

with O-Leg. ∙ Wall mount brackets specified with unit attach to case

horizontally. ∙ Panel mounted and Stack-on applications, brackets and

hardware are ordered separately. ∙ Sliding Door Overhead Cabinets units do not lock. ∙ If Wall Bracket option is selected, $150 upcharge applies.

Hinged Door Overhead Cabinet ∙ 14" High x 141/4" Deep. ∙ Available 36", 42", 48" and 60"Wide. ∙ 36"and 42" wide have 2 Hinged Doors. ∙ 48" wide has 3 Hinged Doors. ∙ 60" wide has 4 Hinged Doors. ∙ Case and Door Fronts can be specified in different

finishes. ∙ Does not ship with a pull, door overhangs case

to pull. ∙ Can be used as a wall mount, panel mount or

stack-on storage with O-Leg. ∙ Wall mount brackets specified with unit attach

to case horizontally. ∙ Panel mounted and Stack-on applications,

brackets and hardware are ordered separately. ∙ Hinged Door Overhead Cabinets units do not lock. ∙ If Wall Bracket option is selected, $150 upcharge applies.

O-Leg Overhead Support ∙ 141/8" Deep. ∙ Available 51/2" and 201/2" High. ∙ Use 51/2" on worksurface to reach 50"H. ∙ Use 201/2" on worksurface to reach 65"H. ∙ O-Leg ships fully assembled with mounting hardware. ∙ O-Legs can be used with DeXTR Overheads. ∙ Must be placed over two full-height supports. ∙ Cannot be placed over non-supported sections such

as returns using a flat bracket or tower-to- worksurface bracket.

Overhead Panel Mounted Bracket ∙ Used to panel-mount DeXTR Overheads on Emerge or

Prefix panels. ∙ Ships with one set of three brackets, which includes

one right, one center and one left bracket. ∙ Center bracket to be used when spanning two panels.

Wall Mount Tackboard ∙ 181/2" High x 5/8" Deep. ∙ Available 36", 42", 48",60", 66", 72" and 78"Wide. ∙ Mounted by screwing though tackboard.

Laminate Layering Shelf ∙ 51/2" High x 141/2" Deep. ∙ Available 60", and 72" Wide. ∙ Shelf does not attach to surface. ∙ Works with lower credenzas to provide additional

storage areas. ∙ Cannot be stacked. ∙ Cannot add a hutch on top of a layering shelf.

Cable Management Troughs ∙ Available 17" and 36" Wide. ∙ Ships flat and assembled by the customer. ∙ Attaches underneath the worksurface with

screws. ∙ 17"W has one wire access cut out on the

user side. ∙ 36"W has two wire access cut outs on the

user side. ∙ Cut outs give users access to inside the trough without having

to detach it from the worksurface.

Power/Data Modules — Clamp On Worksurface ∙ 6' Power cord. UL Listed. ∙ Includes adapters to allow use of commercially

available data terminals or blanks to fill unused openings. Many of the AMP, AT&T, Krone, Leviton and most commercial data terminals can be used.

∙ Color finish available: Loft. ∙ Fits on any worksurface with a 4"overhang.

Power/Data Modules — Clamp On Worksurface ∙ Must be installed at time of initial worksurface

installation if installing between a worksurface and panel.

∙ 6' Power cord. UL Listed. ∙ The USB hub allows simultaneous powering of 2 USB-A devices.

The USB hub is a charger only, no ability to connect to a PC. The charging capacity is limited and may not charge all devices.

∙ Color finishes available: Storm (STRM) and Snow (SNW). ∙ Fits on any worksurface with a 4" overhang.

Power/Data Modules — Under Worksurface ∙ 6' Power cord. UL Listed. ∙ Color finishes available: Storm (STRM) and

Snow (SNW). ∙ Works with any top that has a 5" x 5" square

clearance.

DeXTR


15|

DeXTR and Systems Integration Worksurface Applications Either DeXTR or Universal can be used with DeXTR in an open plan application. There are several support options:A. Completely panel supported.B. Combination of panel supported and another worksurface support such as:

∙ Pedestal (Include® or DeXTR) ∙ DeXTR O-leg ∙ End panel (Universal or DeXTR) ∙ Tower-to-worksurface bracket ∙ Support column ∙ Universal round column leg ∙ DeXTR post leg

C. Freestanding: ∙ Two pedestals (Include® or DeXTR) ∙ Two DeXTR O-legs ∙ One DeXTR O-leg and one DeXTR O-leg support for lower credenzas

Additional application guidelines for worksurfaces: ∙ Universal worksurfaces are available with grommets or no grommets. ∙ When DeXTR lower credenzas are used along the spine wall and are placed adjacent to the wing wall, one electrical/data cutout on

the wing wall will be blocked. ∙ When DeXTR credenzas are used along the wing wall and are placed adjacent to the spine wall, one electrical/data cutout on the

spine wall will be blocked. ∙ When the DeXTR O-leg support for credenzas is used, it is recommended to also panel attach the worksurface with the worksurface

anti-dislodgement bracket kit M-CWB2. ∙ When the DeXTR O-leg support is used with panels, it is recommended to also panel attach the O-leg to the panel with the O-leg to

panel bracket kit M-DXSLPBL (left) and/or M-DXSLPBR (right). This bracket will provide additional workstation rigidity. ∙ When the DeXTR end panel support is used with panels, it is recommended to use the end panel support with panel bracket model.

This model will provide additional workstation rigidity. ∙ The worksurface to tower bracket kit, M-TB2W1, will work with DeXTR towers, DeXTR worksurfaces, and Universal worksurfaces. ∙ When DeXTR credenzas are placed along the spine wall, multiple electrical/data cutouts will be blocked. ∙ When specifying an 84" Worksurface, cannot use two O-legs, must use at least one additional support such as a pedestal or lateral file. ∙ A bridge worksurface is considered 48" W or shorter, can be supported by two flat brackets. Longer bridges cannot be supported by a

flat bracket only. ∙ A return worksurface is considered 48" W or shorter. Longer returns cannot be supported by a flat bracket only.

Application Guidelines—Combination of Panel Supported and Another Worksurface Support ∙ For applications where 1) the worksurface is perpendicular to the spine wall; 2) the worksurface is panel supported off the spine

wall; and 3) there are DeXTR credenzas placed under the worksurface along the spine: there is not enough clearance to use standard worksurface cantilevers to attach the worksurface to the spine. Use the worksurface anti-dislodgement bracket kit M-CWB2 to panel attach the worksurface in lieu of cantilevers.

Panel Mounted Stack-on Storage Applications ∙ The DeXTR Overhead storage cabinets can be used on Emerge and Prefix as panel mounted overheads. ∙ The Overhead storage units require a storage to panel bracket kit, model M-DXPMB. This model includes one left hand, one right

hand, and one center bracket. The brackets are available in all paint colors. ∙ The storage cabinets do not have off modular capabilities. ∙ For proper installation and support, the storage units must follow the following specification rules:

– There should be a storage unit of the same construction on each side of a given panel. – The storage units on opposite sides of a given panel should be in the same location vertically and horizontally. – Only one storage unit per panel, per side. – The wing panel adjacent to the spine wall needs to be the same height as the spine wall.


Reference pages 11-15 for DeXTR specification information.All Dimensions are Actual. Add Suffix "N" to a model number for no grommets. Example: M-URW2448N. Arrow on worksurface notes woodgrain direction.

De

XTR

RE

FERE

NCE

16 |

Rectangular Worksurface: Edge

List List

Description Model D W Wt. Cubes L1 L2

Rectangular Worksurface, 20"D M-URW2036 20" 36" 31 2.2 341 373

W

D

M-URW2042 20" 42" 43 2.6 365 403M-URW2048 20" 48" 45 2.9 390 434M-URW2054 20" 54" 47 3.2 416 466M-URW2060 20" 60" 52 3.6 442 497M-URW2066 20" 66" 67 3.9 464 524M-URW2072 20" 72" 74 4.2 485 550


W

D

M-URW2442 24" 42" 44 2.7 386 424

M-URW2448 24" 48" 46 3 420 464M-URW2454 24" 54" 48 3.7 438 488M-URW2460 24" 60" 53 3.7 460 515M-URW2466 24" 66" 68 4.4 501 561M-URW2472 24" 72" 75 4.4 543 608M-URW2484 24" 84" 88 5.1 627 703


W

D

M-URW3042 30" 42" 47 3.2 430 478M-URW3048 30" 48" 52 3.6 460 515M-URW3054 30" 54" 59 4.6 480 542M-URW3060 30" 60" 63 4.6 502 570M-URW3066 30" 66" 72 5.5 543 618M-URW3072 30" 72" 80 5.5 586 668M-URW3084 30" 84" 93 6.2 668 764

HOW TO SPECIFYSelect Model Number

No Grommet option: Add "N" suffix (no upcharge)

Select Laminate

See page 4

Select Edge Trim Color

Edgeband

1¼"

See page 4

M - . .


DeXTR

REFERENCE

17|

Reference pages 11-15 for DeXTR specification information.All Dimensions are Actual. Arrow on worksurface notes woodgrain direction.

Rectangular Worksurface: Knife Edge

List List

Description Model D W Wt. Cubes L1 L2

Rectangular Worksurface, 24"D M-DXRW2448J 24" 48" 54 3.4 700 720M-DXRW2460J 24" 60" 75 4.2 802 822M-DXRW2472J 24" 72" 89 5.0 889 909

Rectangular Worksurface, 30"D M-DXRW3048J 36" 48" 75 4.2 949 969M-DXRW3060J 36" 60" 92 5.1 1138 1168M-DXRW3072J 36" 72" 110 6.1 1301 1331

Coming Soon

Coming Soon

HOW TO SPECIFYSelect Model Number Select Laminate

See page 4

Select Edge Trim Color

See page 4

Select Grommet and Grommet Color

See page 4

G Round GrommetX No Grommet

M - . . .


Reference pages 11-15 for DeXTR specification information.All Dimensions are Nominal.

De

XTR

REFE

RENC

E

18 |

External Table Top Support Channel

List

Description Model W Wt. Cubes L1

External Table Top Support Channel M-PPSC42 30" 6 0.4 184M-PPSC48 36" 6 0.4 190M-PPSC54 41" 7 0.4 244M-PPSC60 48" 8 0.5 250M-PPSC72 60" 10 0.5 260M-PPSC84 72" 12 0.5 270

External Support Channel Selection GuideSUPPORT COMBINATION Worksurface Width for Rectangle

SUPPORT 1 SUPPORT 2 84" 72" 66" 60" 54"

O-Leg O-Leg M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54

O-Leg Laminate End Panel M-PPSC84 M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54

Laminate End Panel Laminate End Panel M-PPSC60 M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54

O-Leg Pedestal M-PPSC72 M-PPSC60 M-PPSC60 M-PPSC54

Pedestal Laminate End Panel M-PPSC60 M-PPSC60 M-PPSC60

Pedestal Pedestal M-PPSC60

O-Leg 2H Lat/Multi

Pedestal 2H Lat/Multi

Laminate End Panel 2H Lat/Multi

*When specifying a 54"W or 60"W Floating Modesty Panel, it is not necessary to specify an external channel.

HOW TO SPECIFYSelect Model Number Select Paint Color

See page 4

M - .



DeXTR

REFERENCE

19|

Worksurface Supports

List List

Description Model H W Wt. Cubes P1 P2

Angled Steel Leg M-DXSL28AM2 28.5" 1.25" 15 1.9 460 485

4"H Steel Stanchion M-DXSL4AM2 4" 1.25" 5 0.2 230 250

28" Post Leg M-DXLP28 28.5" 2" 15 1.0 150 165

Coming Soon

Coming Soon


See page 4

M - .



De

XTR

REFE

RENC

E

20 |


List List

Description Model H W Wt. Cubes L1 L2

Laminate End Panel Support M-DXLEP20 28" 20" 39 3.2 352 367M-DXLEP24 28" 24" 44 3.7 377 392M-DXLEP30 28" 30" 50 4.2 402 417

List List List List

Description Model H W Wt. Cubes L1/P1 L2/P1 L1/P2 L2/P2

End Panel Support with Panel Bracket

M-DXLEPB2428L 28" 24" 17 2.2 400 420 415 435M-DXLEPB2428R 28" 24" 17 2.2 400 420 415 435M-DXLEPB3028L 28" 30" 21 3.2 424 444 439 459M-DXLEPB3028R 28" 30" 21 3.2 424 444 439 459


See page 4

Select Paint Color

See page 4

M - . .



DeXTR

REFERENCE

21|


List List


O-Leg M-DXSL2028O 29.5" 20" 15 3.6 325 350M-DXSL2428O 29.5" 24" 17 3.6 350 375M-DXSL3028O 29.5" 30" 19 5.4 385 410

Shared O-Leg M-DXSL1228SL 29.5" 12" 7 3.7 315 340M-DXSL2028SL 29.5" 20" 17 3.7 325 350M-DXSL2428SL 29.5" 24" 19 3.7 361 386M-DXSL3028SL 29.5" 30" 21 5.4 399 424

Panel Mounted O-Leg Bracket M-DXSLPBL 29.5" • 3 3.7 125 150M-DXSLPBR 29.5" • 3 3.7 125 150


See page 4

M - .



De

XTR

REFE

RENC

E

22 |


List List


Double-Depth O-Leg M-DXSL4828O 29.5" 48" 18 7 615 640M-DXSL6028O 29.5" 60" 17 8.7 679 704

O-Leg for Low Credenzas M-DXSL207O 6" 20" 5 1 225 250M-DXSL247O 6" 24" 6 1 243 268M-DXSL307O 6" 30" 7 1 295 320

Shared O-Leg for Low Credenzas M-DXSS207SL 6" 20" 6 1 357 382M-DXSS247SL 6" 24" 7 1 384 409M-DXSS307SL 6" 30" 8 1 465 490


See page 4

M - .



DeXTR

REFERENCE

23|


List List


Standing Height O-Leg M-DXSL2441O 41" 24" 16 5.3 475 500M-DXSL3041O 41" 30" 17 6.6 525 550

Standing Height Shared O-Leg M-DXSL2441SL 41" 24" 16 5.3 500 525M-DXSL3041SL 41" 30" 17 6.6 549 574

Standing Height Panel Mounted O-Leg Bracket M-DXSLSPBL 41" 24" 6 3.7 155 180M-DXSLSPBR 41" 30" 6 5.4 155 180


See page 4

M - .



De

XTR

REFE

RENC

E

24 |

Standing Height Laminate SupportNotes: ∙ Must match worksurface depth. ∙ Use with Universal Worksurface Tower Support Bracket.

List List

Description Model H D W Wt. Cubes L1/L1 L2/L2

Standing Height Side Access Storage Tower M-DXLW502412L 50" 24" 12" 100 11 2000 2065M-DXLW502412R 50" 24" 12" 100 11 2000 2065M-DXLW503012L 50" 30" 12" 121 13.6 2075 2140M-DXLW503012R 50" 30" 12" 121 13.6 2075 2140

Laminate Support Lateral

List List


Lateral File M-DXLSLF230 28.5" 24" 31.375" 121 15.6 1800 1865

HOW TO SPECIFYSelect Model Number Select Laminate Case

See page 4

Select Laminate Front

See page 4

Select Pull Color

See page 4

M - . . .

DeXTR™ Desking SystemReference pages 11-15 for DeXTR specification information.All Dimensions are Nominal.

DeXTR

REFERENCE

25|

GSA SIN 711-3

Laminate Support PedestalsNotes: ∙ Must match worksurface depth.

List List


Support Pedestal B/B/F M-DXL2028BBF 28.5" 20" 16" 73 7.3 1000 1035M-DXL2428BBF 28.5" 24" 16" 85 8.5 1096 1136M-DXL3028BBF 28.5" 30" 16" 105 10.5 1219 1264

Support Pedestal F/F M-DXL2028FF 28.5" 20" 16" 72 7.3 1000 1035M-DXL2428FF 28.5" 24" 16" 84 8.5 1096 1136M-DXL3028FF 28.5" 30" 16" 104 10.5 1219 1264


See page 4


See page 4

Select Pull Color

See page 4

M - . . .



De

XTR

REFE

RENC

E

26 |

Laminate Pedestals

List List


Mobile Pedestal B/F M-DXLM211520BF 21.5" 20" 16" 65 5.8 1175 1215

Freestanding Footed Pedestal B/F M-DXLF2016BF 24.5" 20" 16" 65 5.8 1222 1262

List List

Description Model H D W Wt. Cubes UPH 1 UPH 2

Mobile Pedestal Cushion M-DXUC2016 1" 20" 16" 6 1.1 400 410

Coming Soon


See page 4


See page 4

Select Pull Color

See page 4

M - . . .

HOW TO SPECIFYSelect Model Number Select Upholstery Fabric

See pages 5-8

M - .


DeXTR

REFERENCE

27|

GSA SIN 711-3

Laminate Storage

List List


Lateral Files M-DXLLF236 29.5" 24" 36" 204 18.5 1750 1815M-DXLLF436 57" 24" 36" 366 35.9 2950 3035

Storage Cabinet M-DXLSC36 29.5" 24" 36" 150 18.5 1500 1565

List List

Description Model H D W Wt. Cubes L1 L2

Bookcases M-DXBS236 29.5" 13" 36" 90 11 940 970M-DXBS336 50" 13" 36" 122 17.7 1151 1186M-DXBS436 65" 13" 36" 156 22.7 1323 1363


See page 4


See page 4

Select Pull Color

See page 4

M - . . .


See page 4

M - .



De

XTR

REFE

RENC

E

28 |

Laminate Towers

List List


B/B/F, Personal Storage Left, Wardrobe Right M-DXLT652424RBBF 65" 24" 24" 202 21.1 4061 4166

B/B/F, Personal Storage Right, Wardrobe Left M-DXLT652424LBBF 65" 24" 24" 202 21.1 4061 4166

B/B/F, Bookcase Left, Wardrobe Right M-DXLTS502418RBBF 50" 18" 24" 167 16.2 3577 3672M-DXLTS652418RBBF 65" 18" 24" 200 21.9 3944 4049

M-DXLTS502424RBBF 50" 24" 24" 200 21.1 3765 3865M-DXLTS652424RBBF 65" 24" 24" 240 28 4134 4244

B/B/F, Bookcase Right, Wardrobe Left M-DXLTS502418LBBF 50" 18" 24" 167 16.2 3577 3672M-DXLTS652418LBBF 65" 18" 24" 200 21.9 3944 4049

M-DXLTS502424LBBF 50" 24" 24" 200 21.1 3765 3865M-DXLTS652424LBBF 65" 24" 24" 240 28 4134 4244


See page 4


See page 4

Select Pull Color

See page 4

M - . . .



DeXTR

REFERENCE

29|

Laminate Towers

List List


B/B/F, Bookcase Left, Wardrobe Right M-DXLTF501824RBBF 50" 18" 24" 169 16.2 3866 3961M-DXLTF502424RBBF 50" 24" 24" 202 21.1 4069 4169

B/B/F, Bookcase Right, Wardrobe Left M-DXLTF501824LBBF 50" 18" 24" 169 16.2 3866 3961M-DXLTF502424LBBF 50" 24" 24" 202 21.1 4069 4169

List List

Description Model H D W Wt. Cubes P1 P2

Universal Worksurface Tower Support Bracket M-TB2W1 • • • 1 0.5 46 72

Coming Soon

Coming Soon


See page 4


See page 4

Select Pull Color

See page 4

M - . . .


See page 4

M - .


De

XTR

REFE

RENC

E

30 |

GSA SIN 711-3

Laminate Credenzas

List List


Low Credenza B/B/F/F M-DXLC216020BBFF 21.5" 20" 60" 190 19.9 3056 3141M-DXLC217220BBFF 21.5" 20" 72" 230 23.7 3327 3422

Low Credenza Open Left B/F Right M-DXLC216020LBFO 21.5" 20" 60" 160 19.9 2675 2740M-DXLC217220LBFO 21.5" 20" 72" 200 23.7 3092 3162

Low Credenza Open Right B/F Left M-DXLC216020RBFO 21.5" 20" 60" 160 19.9 2675 2740M-DXLC217220RBFO 21.5" 20" 72" 200 23.7 3092 3162

Low Credenza Open M-DXLC213020O 21.5" 20" 30" 65 14.2 1500 1530M-DXLC213620O 21.5" 20" 36" 85 11.9 1544 1579


See page 4


See page 4

Select Pull Color

See page 4

M - . . .


DeXTR

REFERENCE

31|

GSA SIN 711-3

Laminate CredenzasList List


Footed Low Credenza B/B/F/F M-DXLCF216020BBFF 21.5" 20" 60" 192 19.9 3150 3235M-DXLCF217220BBFF 21.5" 20" 72" 232 23.7 3189 3284

Footed Low Credenza Open Left B/F Right M-DXLCF216020LBFO 21.5" 20" 60" 162 19.9 3000 3065M-DXLCF217220LBFO 21.5" 20" 72" 202 23.7 3048 3118

Footed Low Credenza Open Right B/F Left M-DXLCF216020RBFO 21.5" 20" 60" 162 19.9 3000 3065M-DXLCF217220RBFO 21.5" 20" 72" 202 23.7 3048 3118

Low Credenza Open M-DXLCF213020O 21.5" 20" 30" 67 9.8 1550 1580M-DXLCF213620O 21.5" 20" 36" 87 11.9 1593 1628

List List

Description Model H D W Wt. Cubes UPH 1 UPH 2

Credenza Cushion M-DXUC2030 1" 20" 30" 9 1.9 453 464M-DXUC2036 1" 20" 36" 11 2.2 492 504

Coming Soon

Coming Soon

Coming Soon

Coming Soon


See page 4


See page 4

Select Pull Color

See page 4

M - . . .

HOW TO SPECIFYSelect Model Number Select Upholstery Fabric

See pages 5-8

M - .



De

XTR

REFE

RENC

E

32 |

Laminate Modesty PanelsNotes: ∙ Full width laminate modesty panels are designed to work with 60", 66", and 72" desks. ∙ Full height and half height laminate modesty panels can only be used when specifying a pedestal and/or end panel.

List List


Full Width/Full Height M-DXLMP2828FP 28.5" 28" 33 2.7 365 385M-DXLMP3428FP 28.5" 34" 38 3.2 418 438M-DXLMP4028FP 28.5" 40" 44 3.6 441 461

Full Width/Half Height M-DXLMP2814HP 14" 28" 19 1.6 275 290M-DXLMP3414HP 14" 34" 23 1.9 282 297M-DXLMP4014HP 14" 40" 29 2.4 294 309


See page 4

M - .



DeXTR

REFERENCE

33|

Floating Modesty Panels

List List


Laminate Floating Modesty Panel M-DXLFMP3014 14" 30" 10 0.8 400 420M-DXLFMP3614 14" 36" 12 0.8 423 443

M-DXLFMP4214 14" 42" 14 0.8 454 474M-DXLFMP4814 14" 48" 16 1.1 496 516M-DXLFMP6014 14" 60" 20 1.1 576 596

Floating Modesty Selection GuideSUPPORT COMBINATION Worksurface Width for Rectangle

SUPPORT 1 SUPPORT 2 84" 72" 66" 60" 54" 48" 42" 36" 30"

O-Leg O-Leg M-DXLFMP6014 M-DXLFMP4814 M-DXLFMP4814 M-DXLFMP4214 M-DXLFMP3614 M-DXLFMP3014

O-Leg Laminate End Panel M-DXLFMP6014 M-DXLFMP4814 M-DXLFMP4214 M-DXLFMP3614 M-DXLFMP3014

O-Leg Pedestal M-DXLFMP6014 M-DXLFMP4814 M-DXLFMP4214 M-DXLFMP3614 M-DXLFMP3014

Laminate End Panel Laminate End Panel M-DXLFMP4814 M-DXLFMP3614 M-DXLFMP3014

Pedestal Laminate End Panel M-DXLFMP4814 M-DXLFMP3614 M-DXLFMP3014

Pedestal Pedestal M-DXLFMP4814 M-DXLFMP3614 M-DXLFMP3014

O-Leg 2H Lat/Multi M-DXLFMP4814 M-DXLFMP3614 M-DXLFMP3014

Pedestal 2H Lat/Multi M-DXLFMP3014

Laminate End Panel 2H Lat/Multi M-DXLFMP3014

*When specifying a 54"W or 60"W Floating Modesty Panel, it is not necessary to specify an external channel.


See page

M - .


See page 4

M - .



De

XTR

REFE

RENC

E

34 |

Glass ScreensNotes: ∙ Above Privacy Screen and Return Privacy Screens only available in Frosted Glass and Platinum Brackets. ∙ Above Privacy Screen clamps onto worksurface and cannot be installed where support storage will be attached. ∙ Return Privacy Screen intended to be attached between users sitting side-by-side, and will create 1/8" separation

between worksurfaces.

Description Model H W Wt. Cubes List

Above Privacy Screen M-DXFGS1230 13" 30" 13 1.5 490M-DXFGS1236 13" 36" 15 1.8 536M-DXFGS1242 13" 42" 18 2.3 592M-DXFGS1248 13" 48" 20 2.3 666M-DXFGS1254 13" 54" 22 2.9 710M-DXFGS1260 13" 60" 24 2.9 760

Return Privacy Screen M-DXFGRS1220 13" 20" 13 1.3 390M-DXFGRS1224 13" 24" 16 1.4 413M-DXFGRS1230 13" 30" 18 1.6 445M-DXFGRS1236 13" 36" 20 1.9 490


M -



DeXTR

REFERENCE

35|

Above/Below ScreensNotes: ∙ Only available in Frosted Translucent Acrylic and Platinum Brackets. ∙ Above and below privacy screen extends 13" above and 13" below the worksurface. ∙ Attachment bracket extends 2" into the worksurface.

Description Model H W Wt. Cubes List

Above/Below Full Privacy Screens M-DXFGPS2830 28" 30" 6 6.4 1100M-DXFGPS2836 28" 36" 6 6.4 1405M-DXFGPS2842 28" 42" 6 6.3 1422M-DXFGPS2848 28" 48" 8 8.2 1508M-DXFGPS2854 28" 54" 9 8.6 1722M-DXFGPS2860 28" 60" 9 8.6 1732

Above/Below Screen Selection GuideSUPPORT COMBINATION Worksurface Width for Rectangle

SUPPORT 1 SUPPORT 2 84" 72" 66" 60" 54" 48" 42" 36"

O-Leg O-Leg M-DXFGPS2860 M-DXFGPS2854 M-DXFGPS2848 M-DXFGPS2842 M-DXFGPS2836 M-DXFGPS2830

O-Leg Pedestal M-DXFGPS2860 M-DXFGPS2848 M-DXFGPS2842 M-DXFGPS2836 M-DXFGPS2830

O-Leg Laminate End Panel M-DXFGPS2860 M-DXFGPS2848 M-DXFGPS2842 M-DXFGPS2836 M-DXFGPS2830

Laminate End Panel Laminate End Panel M-DXFGPS2848 M-DXFGPS2836 M-DXFGPS2830

Pedestal Pedestal M-DXFGPS2848 M-DXFGPS2836 M-DXFGPS2830

Pedestal Laminate End Panel M-DXFGPS2848 M-DXFGPS2836 M-DXFGPS2830

O-Leg 2H Lat/Multi M-DXFGPS2842 M-DXFGPS2836 M-DXFGPS2830

Pedestal 2H Lat/Multi M-DXFGPS2830

Laminate End Panel 2H Lat/Multi M-DXFGPS2830

HAT HAT M-DXFGPS2860 M-DXFGPS2860 M-DXFGPS2854 M-DXFGPS2848 M-DXFGPS2842 M-DXFGPS2836


M -



De

XTR

REFE

RENC

E

36 |

Fabric Above/Below ScreenNotes: ∙ Only available with Platinum Brackets. ∙ Fabric Above/Below privacy screen extends 20" above and 13" below worksurface. ∙ Fabric Above/Below privacy screens must be ordered the same width as the worksurface it is being used with to properly attach. ∙ Above/Below Fabric Privacy Screens can attach to worksurfaces that are either O-leg supported on both sides, or worksurfaces that

are supported by a support pedestal on one side and an O-leg on the other. They cannot be attached to worksurfaces supported by support pedestals on both sides or shared O-legs.

List List

Description Model H W Wt. Cubes Grade A Grade B

Fabric Above/Below Full Privacy Screens M-DXPS3536F 35" 36" 21 3.8 1265 1297M-DXPS4236F 35" 42" 27 4.4 1326 1359M-DXPS4836F 35" 48" 33 6 1407 1442M-DXPS5436F 35" 54" 39 6 1467 1504M-DXPS6036F 35" 60" 45 6 1552 1591M-DXPS6636F 35" 66" 51 7.4 1632 1673M-DXPS7236F 35" 72" 57 7.4 1700 1743

Fabric Return ScreenNotes: ∙ Only available with Platinum Brackets. ∙ Fabric Return Screen attaches to top of worksurface with adhesive banding.

List List


Fabric Return Screen M-DXFSS1220 13" 20" 11 1.1 550 564M-DXFSS1224 13" 24" 13 1.1 559 573M-DXFSS1230 13" 30" 15 1.6 584 599M-DXFSS1236 13" 36" 17 1.9 617 632

Fabric Return Screen M-DXFSS2020 20" 20" 13 1.4 644 660M-DXFSS2024 20" 24" 15 1.5 663 680M-DXFSS2030 20" 30" 17 1.9 693 710M-DXFSS2036 20" 36" 19 2.2 757 776


See pages 5

M - .

HOW TO SPECIFYSelect Model Number Select Fabric

See pages 5-8

M - .



DeXTR

REFERENCE

37|

Laminate Overhead CabinetsNotes: ∙ All Overhead Cabinets shown above can be used as a wall mount, panel mount or stack-on storage with O-leg. ∙ For panel mounted and stack-on applications, brackets and hardware are ordered separately. ∙ Wall mount brackets specified with unit. Brackets attach to case horizontally. ∙ All Overhead Cabinets are non locking.

List List


Sliding Door Overhead Cabinet M-DXLOH1436S 14" 14.25" 36" 39 9.6 1300 1355M-DXLOH1442S 14" 14.25" 42" 48 9.7 1361 1416M-DXLOH1448S 14" 14.25" 48" 57 13.4 1400 1460M-DXLOH1460S 14" 14.25" 60" 69 9.7 1499 1564M-DXLOH1466S 14" 14.25" 66" 83 14.6 1641 1706M-DXLOH1472S 14" 14.25" 72" 95 15.9 1778 1848

Hinged Door Overhead Cabinet M-DXLOH1436D 14" 14.25" 36" 39 9.7 1150 1205M-DXLOH1442D 14" 14.25" 42" 48 9.7 1266 1321M-DXLOH1448D 14" 14.25" 48" 57 12.1 1392 1452M-DXLOH1460D 14" 14.25" 60" 115 11.4 1536 1601


See page 4


See page 4

Select Bracket

Add $150

M - . . .



De

XTR

REFE

RENC

E

38 |

Laminate Overhead Support

List List

Description Model H D Wt. Cubes P1 P2

O-Leg Overhead Support M-DX50OS 5.5" 14" 6 1.1 566 576M-DX65OS 20.5" 14" 8 1.1 681 691

Panel Mounted Bracket M-DXPMB • • 3 0.2 197 207

HOW TO SPECIFYSelect Model Number Select Paint

See page 4

M - .



DeXTR

REFERENCE

39|

Laminate Stack-on CabinetsNotes: ∙ Stack-on Storage must be placed over two full-height supports. Cannot be placed over non-supported sections such as returns using

a flat bracket or tower-to-worksurface bracket. ∙ Stack-on Storage Cabinets are non locking.

List List


Sliding Doors M-DXH1472S 35" 14.25" 72" 140 30.4 2000 2075

Hinged Doors M-DXH1472D 35" 14.25" 72" 144 30.4 2000 2075

Stack-on Storage TackboardList List

Description Model H D W Wt. Cubes Grade A Grade B

Tackboard M-DXTB7265 18.5" • 72" 12 1.4 491 503


See page 4


See page 4

M - . .


See pages 5-8

M - .



De

XTR

REFE

RENC

E

40 |

Tackboards

List List


Wall Mount Tackboard M-DXWMTB1836 18.5" 36" 7 1.6 410 420

M-DXWMTB1842 18.5" 42" 8 1.9 433 444M-DXWMTB1848 18.5" 48" 9 2.1 463 475M-DXWMTB1860 18.5" 60" 10 1.1 524 537M-DXWMTB1866 18.5" 66" 11 1.4 583 598M-DXWMTB1872 18.5" 72" 12 1.4 607 622M-DXWMTB1878 18.5" 78" 13 1.4 636 652

Accessories

List List


Layering Shelf M-DXL1460LS 5.5" 14.5" 60" 39 2.5 520 540M-DXL1472LS 5.5" 14.5" 72" 50 3.1 606 626


See page 4

M - .


See pages 5-8

M - .


DeXTRREFERENCE

41|

GSA SIN 711-1

Electrical AccessoriesDescription Model H D W Wt. Cubes List

Cable Management Troughs M-DXCTROUGH17 6.75" 2.5" 17" 3 0.5 125M-DXCTROUGH1710 6.75" 2.5" 17" 14 0.5 920

M-DXCTROUGH36 6.75" 2.5" 36" 5 0.9 175M-DXCTROUGH3610 6.75" 2.5" 36" 30 0.9 1551

O-Leg Cord Clips M-DXWMCLIPSM • • • 0.5 0.1 90M-DXWMCLIPLG • • • 0.8 0.1 120

2 Receptacles 1 USB Under Worksurface Mount (Shown) M-PWRMOD2UWM • • • 2 0.2 6213 Receptacles Under Worksurface Mount M-PWRMOD3UWM • • • 2 0.2 430

Available in Storm (STRM) or Snow (SNW)

2 Receptacles 2 Data Accessory M-COMDOME2 • • • 2 0.2 451

Available in Loft

2 Receptacles 1 USB M-PWRMOD2WC • • • 2 0.2 6213 Receptacles (Shown) M-PWRMOD3WC • • • 2 0.2 430

Available in Storm (STRM) or Snow (SNW)

List List


Power Pole - w/o Receptacles M-P870070 • • • 14 0.6 582 614


Model M-P870070 only

See page 4

Select Plastic Color

See page 4

M - .

dextr desking system - maxon furniture · 2019. 7. 26. · kingswood walnut ki ... moonstone ref23...

Documents