dfx-mm series - cross technical services · dfx-mm is repeatable according to api mpms 5.8 table...
TRANSCRIPT
09/1
0/2
012 P
age1
L002H
DFX
-MM
lea
flet
High-end Ultrasonic Flow Meters
for Liquid Hydrocarbons Custody Transfer
DFX-MMDFX-MM seriesseries
32 beams for ultimate performance32 beams for ultimate performance
09/1
0/2
012 P
age2
L002H
DFX
-MM
lea
flet
Features & benefits
DFX-MMDFX-MM seriesseries
Applications
PerformanceA master meter class UFM exceeding current standards
from Naphtas / Condensates / Liquid gases to Heavy
crudes / Fuel oils
Superior linearity and repeatability thanks to unequalled
spatial coverage and ultra-fast scanning rate
Compliant with OIML R117-1 class 0.3, M.I.D.
2004/22/EC and API MPMS Ch5.8
Truly Provable with standard turbine prover loops
Design32-beams patented design
Transit time operating principle
Unique 22.5° axial symetry with excentration design for
really much less sensitivity to flow profile disturbances
Small volume transducers cavities minimize the scaling
effects and avoid gas pockets
InstallationReduced straight runs installation possible
Compact integrated electronics for easy site
commissioning and start-up
CommunicationHigh integration to common flow computers
Secure ethernet communication
HTML-based configuration and auditing software with
open communication protocol for on-line remote
technical support
Powerfull flow imaging capability
ServiceUltrasonic paths redundancy allows scheduled site
maintenance and downtime reduction.
Transducers exchangeable without recalibrating the
meter
FSO's & FPSO's custody transfer (Crude oil)
On and Offshore allocation metering (Crude
oil, condensates)
Pipeline metering stations (Crude Oil, Refined
products)
Tanker loading / offloading terminals (Crude
Oil, Refined products, Petrochemicals)
Storage management (Crude Oil, Refined
products, Petrochemicals)
DFX-MM requires much less prove volume than other UFM's and therefore is truly provable with standard turbine prover loops where other UFM's definitively should be proved by master meter method.
DFX-MM is provable with standard ball provers thanks to repeatability improved by its unequaled spatial coverage and ultra-fast scanning rate.
DFX-MM accurately measures viscous flows and therefore is ideal when pressure drop is the concern.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-0,06%
-0,04%
-0,02%
0,00%
0,02%
0,04%
0,06%
DFXMM 08 - REPEATABILITY testDiesel oil 4.9 cs t - 600 m3/h - 10 m3 ball prover - 15 runs
RUN n°
ME
TE
R E
RR
OR
%
50 100 150 200 250 300
0,998
0,999
1,000
1,001
1,002
DFXMM 06 - HEAVY OIL
300 cent is t ockes mineral oil, 6'' PD mast er met er
FLOWRATE M3/H
ME
TE
R F
AC
TO
R
09/1
0/2
012 P
age3
L002H
DFX
-MM
lea
flet
DFX-MMDFX-MM seriesseries
Proving volumeComparison with other UFM's
Repeatability & Heavy Oil
1 10 1000
10
20
30Recommended Prover Volume v/s Meter Size
API MPMS chapter 5-8 recommendation
Conventional UFM #1
Conventional UFM #2
DFX-MM proving requirements
Prover Volume ( m3 )
Met
er S
ize
( in
ch )
DFX-MM is repeatable according to API MPMS 5.8 Table B-1 including in DFX-MM is repeatable according to API MPMS 5.8 Table B-1 including in the difficult Reynolds flow transition area (medium to high viscosity oils) the difficult Reynolds flow transition area (medium to high viscosity oils)
09/1
0/2
012 P
age4
L002H
DFX
-MM
lea
flet
Calibration curves
DFX-MMDFX-MM seriesseries
DFX-MM sustains a premium +/- 0.10 % accuracy with a constant K-Factor DFX-MM sustains a premium +/- 0.10 % accuracy with a constant K-Factor over a wide range of viscosities and of operating conditions. over a wide range of viscosities and of operating conditions.
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
0.9900.9910.9920.9930.9940.9950.9960.9970.9980.9991.0001.0011.0021.0031.0041.0051.0061.0071.0081.0091.010
DFX-MM 08'' : baselinesDFX-MM 08'' : baselinesFlowstraightener 7 D long, ball prover volume 10m3
JET FUEL 5,0 cst 17 °C Water 6%
JET FUEL 4,5 cst 24 °C
JET FUEL 4,5 cst 24 °C Ball valve 40% closed
GASOIL 8,4 cst 18 °C
GASOIL 8,4 cst 18 °C Ball valve 40% closed
OIL 15,5 cst 22 °C
OIL 62,0 cst 16 °C
Same oil, no flow conditioner
Flowrate
Mete
r Fact
or
2,000 20,000 200,000 2,000,0000.9900.9910.9920.9930.9940.9950.9960.9970.9980.9991.0001.0011.0021.0031.0041.0051.0061.0071.0081.0091.010
DFX-MM 08'' : baselines v/s Reynolds NumberDFX-MM 08'' : baselines v/s Reynolds NumberFlowstraightener 7 D long, ball prover volume 10m3
JET FUEL 5,0 cst 17 °C Water 6%
JET FUEL 4,5 cst 24 °C
JET FUEL 4,5 cst 24 °C Ball valve 40% closed
GASOIL 8,4 cst 18 °C
GASOIL 8,4 cst 18 °C Ball valve 40% closed
OIL 15,5 cst 22 °C
OIL 62,0 cst 16 °C
Same oil, no flow conditioner
Reynolds Number
Mete
r Fact
or
Featuring in DFX-MM software suite :
CALIBRATION PERFORMANCE MONITORING
TRACEABILITY
DATA VISUALIZATION & PLOTTING
DATA LOGGING
DIAGNOSTICS
PROVING SUPPORT
DOCUMENTATION COMMUNICATION
09/1
0/2
012 P
age5
L002H
DFX
-MM
lea
flet
Calibration Performance Monitoring
DFX-MMDFX-MM seriesseries
DFX-MM is the only ultrasonic flow meter performing real time comparison between factory calibration & site operating conditions.
DFX-MM interfacing is easy and cost effective thanks to its Web server DFX-MM interfacing is easy and cost effective thanks to its Web server and Ethernet link, making skid commissioning, meter health check and and Ethernet link, making skid commissioning, meter health check and
auditing operations straightforward. auditing operations straightforward.
mm Min. Max. Min. Max.
04" * 100 15 350 100 2200
150 30 800 200 5000
200 60 1400 400 8800
250 90 2200 600 13800
300 130 3200 800 20100
350 160 3800 1000 23900
400 200 5000 1300 31400
450 250 6200 1600 39000
500 350 7800 2200 49100
600 500 11000 3100 69200
650 600 13000 3800 81800
700 700 16000 4400 100600
750 900 18000 5700 113200
800 1000 20000 6300 125800
850 1100 23000 6900 144700
900 1200 26000 7500 163500
950 1300 29000 8200 182400
1000 1400 32000 8800 201300
42" 1050 1500 36000 9400 226400
Nominal f low ranges
for s tandard accuracy +/-0, 15%
Meter s ize Flow rate (m3/h) Flow rate (BPH)
Inch
06"08"10"12"14"16"18"20"24"26"28"30"32"34"36"38"40"
* 15 beams design
mm Min. Max. Min. Max.
04" * 100 30 300 200 1900
150 65 650 400 4100
200 120 1200 800 7500
250 200 2000 1300 12600
300 300 3000 1900 18900
350 320 3200 2000 20100
400 400 4000 2500 25200
450 520 5200 3300 32700
500 650 6500 4100 40900
600 1000 10000 6300 62900
650 1150 11500 7200 72300
700 1350 13500 8500 84900
750 1550 15500 9700 97500
800 1750 17500 11000 110100
850 2000 20000 12600 125800
900 2200 22000 13800 138400
950 2500 25000 15700 157200
1000 2750 27500 17300 173000
42" 1050 3000 30000 18900 188700
Nominal f low ranges
for premium accuracy +/-0 , 1%
Meter s ize Flow rate (m3/h) Flow rate (BPH)
Inch
06"08"10"12"14"16"18"20"24"26"28"30"32"34"36"38"40"
* 15 beams design
type
# 150 # 300 # 600 #900 # 150 # 300 # 600 # 900
DFX-MM04 51 60 72 79 113 132 159 174
DFX-MM06 70 88 113 151 154 194 249 333
DFX-MM08 99 125 159 215 218 275 350 473
DFX-MM10 139 176 240 300 306 388 528 660
DFX-MM12 186 232 328 394 410 511 722 867
DFX-MM14 230 300 352 506 660 775
DFX-MM16 258 364 448 568 801 986
DFX-MM18 295 442 650 973
DFX-MM20 350 504 770 1101
DFX-MM24 495 721 1089 1587
DFX-MM26 568 866 1250 1906
DFX-MM28 646 1035 1422 2277
DFX-MM30 748 1192 1646 2623
DFX-MM32 862 1322 1897 2909
DFX-MM34 951 1553 2093 3417
DFX-MM36 1072 1742 2359 3833
DFX-MM38 1194 2627
DFX-MM40 1355 2981
DFX-MM42 1423 3130
Weight
Weight (kg) Weight ( lb)
09/1
0/2
012 P
age6
L002H
DFX
-MM
lea
flet
DFX-MM performance
DFX-MMDFX-MM seriesseries
Technical data
type
mm mm
DFX-MM04 4'' 100 16 406
DFX-MM06 6'' 150 18 457
DFX-MM08 8'' 200 20 508
DFX-MM10 10'' 250 22 559
DFX-MM12 12'' 300 24 610
DFX-MM14 14'' 350 28 711
DFX-MM16 16'' 400 32 813
DFX-MM18 18'' 450 36 914
DFX-MM20 20'' 500 40 1016
DFX-MM24 24'' 600 48 1220
DFX-MM26 26'' 650 52 1321
DFX-MM28 28'' 700 56 1422
DFX-MM30 30'' 750 60 1524
DFX-MM32 32'' 800 64 1626
DFX-MM34 34'' 850 68 1727
DFX-MM36 36'' 900 72 1829
DFX-MM38 38'' 950 76 1930
DFX-MM40 40'' 1000 80 2032
DFX-MM42 42'' 1050 84 2130
Length*
Meter s ize Meter length
Inch Inch
Note : given length are for face to face flanges
METROLOGY:
API MPMS ch5.8M.I.D. 2004/22/EC
:
::
Installation :
CERTIFICATIONS
:pressure : P.E.D. 97/23/EC
ASME B31.3: OIML R117-1 (PTB-1.5-4037579)
GOST-M (FR.C.29.006.A N°38166)SIRIM ATS 04/10
MIGAS (14599/18.06/DMT/2009)SPRING WMO 423/08
INMETRO (P-0003-11-36896-10)
: E.M.C 89/336/EC: I.P. 66/67 IEC529
ENVIRONMENT:
Pressure ::
:
BODY:
: ANSI #150 #300 #600
: full bore
CONVERTER: 110 / 220 VAC 50/60 Hz or 18 / 32 VDC, 10W, isolation 1500V
Pulse volume output :Communication port :
Compliances OIML R117-1 class 0.3
Accuracy +/- 0.15% from 0.5 to 12 m/s+/- 0.10% from 1 to 10 m/s
Repeatability provable, 0.05% 5 runs with conventional prover loopsUncertainty +/-0.027% at 95% confidence level as per API MPMS 5.8 table B-1
10D upstream with recommended flow conditioner + 3D downstream
compliant with all relevant European Community standardsSafety ATEX 94/9/EC II 2 G Exd IIB T6
Metrology
EnvironmentIngress protection
Temperature process : -55°C to + 120°CAmbient: -55°C to + 55°C
Up to 100 barViscosity 0.1 to 600 centistockes
please consult M&T for higher viscosities
Density 400 to 1500 kg/m3
Materials Carbon steel, Low temp carbon steel, Stainless steel, Duplex
Flanges
Internal
Power supplytwo static relays 350V 0.12A isolation 5000V 10/100Base-T IEEE 802.3 Ethernet link RJ45,
optional Wifi 802.11 b & g, optical fiber, RS485
Please contact M&T for specifications outside above standard ones
09/1
0/2
012 P
age7
L002H
DFX
-MM
lea
flet
Specifications
DFX-MMDFX-MM seriesseries
A B - C D - E F - G H
DFX-MM 12 - A 1 - 1 1 - 1 0
09/1
0/2
012 P
age8
L002H
DFX
-MM
lea
flet
DFX-MMDFX-MM seriesseries
Ordering codes
DFX-MM ordering contacts METERING & TECHNOLOGY S.A.S.
Address : Parc des Propylées II - 5, Allée Prométhée 28000 CHARTRES FRANCE
Tel: +33 (0) 965 027 803 / 237 835 446Fax: +33 (0) 237 835 547E.mail : [email protected] : www.mnt-sas.com
Section A : Product line
DFX-MM
Section B : Meter Size
04 4'' / DN100
06 6'' / DN150
08 8'' / DN200
10 10'' / DN250
12 12'' / DN300
14 14'' / DN350
16 16'' / DN400
18 18'' / DN450
20 20'' / DN500
24 24'' / DN600
Section C : Pressure Class
A 150# ANSI R.F. Flanges
B 300# ANSI R.F. Flanges
C 600# ANSI R.F. Flanges
D Other (please contact us)
Section D : Materials of construct ion
Body Flanges Transducers
1 C.S A106 or equ. C.S A105 or equ. Peek / SS 316L
2 L.T.C.S. A333 Gr6or equ.
L.T.C.S. A350 LF2 orequ.
Peek / SS 316L
3 SS 316L or equ. SS 316L or equ. Peek / SS 316L
4 Other Other Peek / SS 316L
Section E : Installat ion condit ions
1 Standard with recommended flow straightener
2 Standard without flow straightener
3 Customized
Sect ion F : Accuracy class
1 standard +/-0.15%
2 premium +/-0.1%
Section G : Documentat ion
0 None
1 Standard
2 Customized
Section H : Special request
0 None
S Special request