diesel injection system
TRANSCRIPT
-
8/9/2019 Diesel Injection System
1/16
-
8/9/2019 Diesel Injection System
2/16
DIESEL ENGINESThe diesel engine
requires compressionratios of 16:1 and higher.
Incoming air iscompressed until its
temperature reachesabout 1,000F (540C).
This is calledheat ofcompression.
As the piston reaches thetop of its compressionstroke, fuel is injectedinto the cylinder, where itis ignited by the hot air
Diesel combustion occurswhen fuel is injected into thehot, highly compressed air inthe cylinder.
-
8/9/2019 Diesel Injection System
3/16
Diesel Injection System
-
8/9/2019 Diesel Injection System
4/16
INDIRECT INJECTION In an indirect injection
(abbreviated IDI) dieselengine, fuel is injectedinto a small prechamber,
which is connected to thecylinder by a narrowopening.
The initial combustiontakes place in thisprechamber.
This has the eect ofslowing the rate ofcombustion, which tends
to reduce noise
-
8/9/2019 Diesel Injection System
5/16
DIRECT INJECTION
A direct injectiondiesel engine
injects the fueldirectly into thecombustion
chamber.Many designs donot use a glow plug
-
8/9/2019 Diesel Injection System
6/16
GLOW PLUGS Glow plugs are always used in diesel enginesequipped with a precombustion chamber andmay be used in direct injection diesel engines to
aid starting.Aglow plugis a heating element that uses 12volts from the battery and aids in the starting ofa cold engine.
As the temperature of the glow plug increases,the resistance of the heating element insideincreases, thereby reducing the current in
amperes needed by the glow plugs.
-
8/9/2019 Diesel Injection System
7/16
Merits of Electronic controlleddiesel injection system
Quantity of fuel injection
Injection timing
Rate of injection during variousstage
Injection pressure
Speed of nozzle opening
-
8/9/2019 Diesel Injection System
8/16
Types of Electronic controlled
diesel injection system Unit Injector System (UIS)
Rotary Distributor System (RDS)
Common Rail Injection System (CRS)
-
8/9/2019 Diesel Injection System
9/16
Unit Injection System
-
8/9/2019 Diesel Injection System
10/16
FUEL TANK AND LIFT PUMPA fuel tank used on a vehicle equipped witha diesel engine differs from the one usedwith a gasoline engine in several ways,including:
A larger filler neck for diesel fuel.
No evaporative emission control devicesor charcoal (carbon) canister.
The diesel fuel is drawn from the fuel tank
by alift pumpand delivers the fuel to theinjection pump. Between the fuel tank and the lift pump is awater-fuel separator.
Water is heavier than diesel fuel andsinks to the bottom of the searator.
-
8/9/2019 Diesel Injection System
11/16
Four Stages of Combustion in CI Engines
-10 TC-20 10 20 30
Start of
injection
End of
injecction
-
8/9/2019 Diesel Injection System
12/16
Combustion in CI Engine
The combustion process proceeds by the following stages:
Ignition delay (ab)- fuel is injected directly into the cylinder towardsthe end of the compression stroke.
The liquid fuel atomizes into small drops and penetrates into the
combustion chamber. The fuel vaporizes and mixes with the high-
temperature high-pressure air.Premixed combustion phase (bc) combustion of the fuel which has
mixed with the air to within the flammability limits !air at high-
temperature and high-pressure" during the ignition delay period
occurs rapidly in a few crank angles.
Mixing controlled combustion phase (cd) after premixed gas
consumed# the burning rate is controlled by the rate at which mixture
becomes available for burning.
The burning rate is controlled primarily by the fuel-air mixing
process.
-
8/9/2019 Diesel Injection System
13/16
!ommon "ail Diesel Injection #ystem
The !ommon "ail Diesel Injection #ystem delivers a more controlled $uantityof atomised fuel, which leads to better fuel economy% a reduction in e&haustemissions% and a signi'cant decrease in engine noise during operation.
-
8/9/2019 Diesel Injection System
14/16
Common rail diesel injection system
In the !ommon "ail system, an accumulator, orrail, is used to create a common reservoir of fuelunder a consistent controlled pressure that isseparate from the fuel injection points.
highpressure pump increases the fuel pressurein the accumulator up to *,+ bar .
The pressure is set by the engine control unit andis independent of the engine speed and $uantityof fuel being injected into any of the cylinders.
The fuel is then transferred through rigid pipes tothe fuel injectors, which inject the correct amountof fuel into the combustion chambers.
-
8/9/2019 Diesel Injection System
15/16
Injectors for !"DI
The injectors used in !ommon "ail systems aretriggered e&ternally by an -lectronic Diesel !ontrol,or -D! unit.
-D! controls all the engine injection parametersincluding the pressure in the fuel rail and the timing
and duration of injection.
Diesel fuel injectors used in !ommon "ail injectionsystems operate dierently to conventional fuelinjectors used in the jerk pump system.
#ome common rail injectors are controlled by amagnetic solenoid on the injector.
ydraulic force from the pressure in the system isused to open and close the injector, but the
available pressure is controlled by the solenoid
-
8/9/2019 Diesel Injection System
16/16