Digiprog III V4.88 Update tips and procedure

Digiprog Introduction

As a worldwide leader in the production and marketing of digital

speedo programming and correction software, Digiprog is just like

experts in vehicle techniques. While among a series of Digiprog

products, Digiprog III odometer master programmer is the most

representative one.

Digiprog III is very popular among comprehensive car owners, and

once I bought one from a China online shop --- Aobd2shop whose

total sales volume was reached up 3200 pieces. Isn’t it amazing?

What’s more, it now has been updated to the newest V4.88. When

comes to the newest version, I would like share with you something

about tips for installation and the whole process of update.

Tips about applying the Digiprog III V4.88 update computer

software:

1. Make sure the power connection is ok and power supply is

enough and stable. The update process will take 15 to 20 minutes.

2. Do not enter standby mode, or display saver mode when

updating.

3. Do not cut off the power during the Digiprog 3 update process.

4. Operation Windows System must be Windows XP SP3 32 bit,

ensure antivirus and firewall software closed.

How to update to Digiprog 3 V4.88

1. Connect the USB port to the PC, start your DP3, run

Digiloader1.exe.

2. Select the right port, choose Digi1.bin and click the button.

3. During updating, it should be like this until finished. (Note: it will

be damaged if you remove it now)

4. Update successfully. Your DP3 should restart automatically.