digital camera c-730 ultra zoom - olympus corporationc-730 ultra zoom thank you for purchasing an...
TRANSCRIPT
CAMERA OPERATION MANUAL
DIGITAL CAMERA
REFERENCE MANUAL
<Click Here>
C-730 Ultra Zoom
DIGITAL CAMERA - PC CONNECTIONOPERATION MANUAL
Explanation of digital camera functions and operating instructions.
Explanation of how to download images between your digital camera and PC.
C-730 Ultra Zoom
� Thank you for purchasing an Olympus digital camera. Before youstart to use your new camera, please read these instructionscarefully to enjoy optimum performance and a longer service life.Keep this manual in a safe place for future reference.
� We recommend that you take test shots to get accustomed toyour camera before taking important photographs.
� The images and illustrations in this manual may differ from theirreal version.
REFERENCE MANUAL
2
For customers in Europe“CE” mark indicates that this product complies with the Europeanrequirements for safety, health, environment and customerprotection. “CE” mark cameras are intended for sales in Europe.
For customers in North and South America
Trademarks• Microsoft and Windows are registered trademarks of Microsoft Corporation.• Macintosh is a trademark of Apple Computer Inc.• All other company and product names are registered trademarks and/or
trademarks of their respective owners.• The standards for camera file systems referred to in this manual are the
“Design Rule for Camera File System/DCF” standards stipulated by theJapan Electronics and Information Technology Industries Association(JEITA).
For customers in USADeclaration of Conformity Model Number : C-730 Ultra ZoomTrade Name : OLYMPUSResponsible Party : Olympus America Inc.Address : 2 Corporate Center Drive, Melville, New York
11747-3157 U.S.A.Telephone Number : 1-631-844-5000
Tested To Comply With FCC StandardsFOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including
interference that may cause undesired operation.
For customers in CanadaThis Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.
3
Contents............................................................................P. 4
Chapter 1Getting started P. 18
Chapter 2Quick-start guide P. 36
Chapter 3Using the menus P. 42
Chapter 4Shooting basics P. 52
Chapter 5Advanced shooting P. 85
Chapter 6Adjusting image quality and exposure P. 112
Chapter 7Playback P. 127
Chapter 8Useful functions P. 155
Chapter 9Print setting P. 184
Chapter 10External flash P. 195
Chapter 11Miscellaneous P. 200
4
C o n t e n t sNames of parts ..................................................................................10
Camera..........................................................................................10Viewfinder/Monitor indications............................................................12
Shooting information ......................................................................12Playback information ......................................................................14Memory gauge and battery check ....................................................16
How to use this manual........................................................................17
Getting started 18Attaching the strap ......................................................................18Loading the batteries ....................................................................20
Selecting optional batteries or AC adapter..................................22Card basics..................................................................................24
Inserting/Removing the card......................................................25Power on/off ..............................................................................27
Monitor appearance and sound ................................................28Card check ..............................................................................29
Date/time setting..........................................................................30Selecting a language ............................................................33Adjusting the diopter ....................................................................35Holding the camera ......................................................................35
Ch
ap
ter
1C
ha
pte
r 2
Quick-start guide 36Taking still pictures ..............................................................36Recording movies ....................................................................37Viewing still pictures ................................................................38Playing back movies ..............................................................39Protect ..................................................................................40Erasing pictures ........................................................................41
5
Using the menus 42What are the menus?....................................................................42How to use the menu ....................................................................43Modes & Shortcut Menus ..............................................................45Tabs & MODE MENU functions (shooting) ......................................47Tabs & MODE MENU functions (playback) ....................................50
Shooting basics 52Shooting mode setting — Mode dial ..............................................52
A/S/M mode setting ................................................................52mode setting........................................................................53
Shooting modes........................................................................54Aperture setting — Aperture priority shooting ............................58Shutter speed setting — Shutter priority shooting ........................59Aperture & Shutter speed setting — Manual shooting ..................60Using My Mode........................................................................61
How to use the shutter button ........................................................62Focusing ......................................................................................63
Auto focus................................................................................63When Auto focus does not work— Subjects that are difficult to
focus on ................................................................................63Focus lock — Focusing on subjects that are not in the center of
the frame ..............................................................................65AF MODE — Changing the focus range ....................................66FULLTIME AF — A reliable time-saving way to focus....................67AF AREA — Changing the position of the AF target mark............68Manual focus ..........................................................................69
Taking still pictures........................................................................71Recording movies ........................................................................74Zoom — Telephoto/Wide-angle shooting ......................................76
Digital zoom ............................................................................77
Ch
ap
ter
3C
ha
pte
r 4
C o n t e n t s ( C o n t . )
6
Flash shooting ..............................................................................78Auto-flash ................................................................................78Red-eye reduction flash ......................................................78Fill-in flash ..........................................................................78Flash off ............................................................................79Slow synchronization SLOW1 SLOW2 SLOW ............79Using the slow synchronization flash ..........................................81Using the flash..........................................................................81Flash intensity control ................................................................84
Advanced shooting 85Metering modes — Metering the subject brightness ........................85
Spot metering — Selecting the metering area..............................85Multi-metering — Metering the exposure of more than one point in
the frame ..............................................................................86AE lock — Locking the exposure ....................................................89Macro mode shooting — Taking close-up pictures ..........................92Super macro mode shooting — Taking super close-up pictures ........94Self-timer shooting........................................................................95Remote control ............................................................................97Sequential shooting ......................................................................99
Sequential shooting, high-speed sequential shootting & AF sequential shooting ..........................................................99
Auto bracketing — Shooting pictures sequentially with a differentexposure for each frame ......................................................100
Recording sound with still pictures................................................103Recording sound with movies ......................................................104Panorama shooting ....................................................................105Taking two-in-one pictures ..........................................................108FUNCTION — Taking black & white or sepia-toned pictures ..........110
Ch
ap
ter
4C
ha
pte
r 5
C o n t e n t s ( C o n t . )
Adjusting image quality and exposure 112Record mode..............................................................................112
Selecting a recording mode for still pictures ..............................114Selecting a recording mode for movies ....................................114
Resolution ......................................................................116ENLARGE SIZE ......................................................................116
ISO sensitivity ............................................................................117Exposure compensation ..............................................................119White balance............................................................................120
AUTO (auto white balance) ....................................................120PRESET (preset white balance) ................................................120
(One-Touch white balance) ................................................121White Balance Adjustment ......................................................122
Sharpness ..................................................................................123Contrast ....................................................................................124Saturation ................................................................................125Noise reduction..........................................................................126
3:2
7
Ch
ap
ter
6C o n t e n t s ( C o n t . )
Playback 127Playing back still pictures ............................................................127
Single-frame playback ............................................................127Quick View ............................................................................128
Slide-Show ................................................................................129Playing back movies — MOVIE PLAY ..........................................130
MOVIE PLAYBACK..................................................................132INDEX ..................................................................................133EDIT ......................................................................................136
Close-up playback......................................................................139Index display..............................................................................140
Selecting the number of pictures ..............................................141Editing still pictures ....................................................................142
Resizing pictures ....................................................................142Trimming pictures ..................................................................143
Ch
ap
ter
7
8
Useful functions 155All reset — Saving the camera’s settings ......................................155Custom button ............................................................................157
Setting the custom button ........................................................158Using the custom button ..........................................................158
Shortcut ....................................................................................160Setting the shortcut menu ........................................................161Using the shortcut menu ..........................................................162
MY MODE SETUP ......................................................................163Information display ....................................................................167Monitor brightness adjustment ....................................................168Beep sound adjustment ..............................................................169Shutter sound adjustment ............................................................170Histogram display ......................................................................171Rec View....................................................................................172Sleep timer ................................................................................173Battery save mode ......................................................................174Power on/off display setting........................................................175Screen setup ..............................................................................177File name ..................................................................................179Pixel Mapping............................................................................181Video output selection ................................................................182Measurement units: m/ft (meters/feet) ..........................................183
Ch
ap
ter
8C o n t e n t s ( C o n t . )
Ajusting playback sound volume..................................................146Adding sound ............................................................................147Protect ......................................................................................148Erasing pictures..........................................................................149
Single-frame erase..................................................................149All-frame erase ......................................................................150
Formatting cards ........................................................................151Playback on a TV ......................................................................152
Picture rotation ......................................................................154
Ch
ap
ter
7
9
Miscellaneous 200Troubleshooting ..........................................................................200User maintenance ......................................................................207
After use ................................................................................207Cleaning the camera ..............................................................207
Error codes ................................................................................208Menu maps................................................................................210Menu functions & factory default settings......................................220Modes & Shooting functions ........................................................222Specifications ............................................................................225Glossary of terms ......................................................................227Index ........................................................................................231
Ch
ap
ter
11
C o n t e n t s ( C o n t . )
External flash 195External flash ............................................................................195
Using the FL-40 external flash..................................................195Using the FL-40 external flash by itself......................................196Using commercially available external flashes ..........................197Compatible commercially available external flashes ..................199C
ha
pte
r 1
0
Print setting 184How to print pictures ..................................................................184All-frame print reserve ................................................................186Single-frame print reserve ..........................................................188Trimming setting ........................................................................191Resetting Print Reserve ................................................................194C
ha
pte
r 9
10
Zoom lever (W/T) (P. 76) Index display/Close-up playback lever ( / ) (P. 139, 140)
Shutter button(P. 62)
Flash switch( ) (P. 81)
Camera
Microphone (P. 103, 104, 147)
Mode dial ( , , , , , , , , ,A/S/M, P, ) (P. 52)
Nam
es o
f p
arts
Diopter adjustmentdial (P. 35)
Flash mode button ( ) (P. 81)Protect button ( ) (P. 40, 148)
AE lock button(P. 89)Custom button( ) (P. 157)Rotationbutton ( ) (P. 154)
Self-timer/Remote controlbutton ( / ) (P. 95, 97)Erase button ( ) (P. 41,149)
Macro/Spot button ( ) (P. 85, 92)Print button ( ) (P. 186, 188)
Viewfinder
OK/Menu button ( )Manual focus button (P. 69)
POWER switch(P. 27)
Monitor button ( ) Quick View button (P. 128)
Monitor
Arrow pad
Card access lamp(P. 62)
11
Camera (Cont.)
Nam
es o
f p
arts
A/V OUT jack (MONO) (P. 152)
Flash (P. 78)Self-timer/Remote control lamp(P. 95, 97)
Remote controlreceiver (P. 97)
Speaker (P. 146)
Lens
Card cover(P. 25)
Strap eyelet (P. 18)
Batterycompartmentcover (P. 20)
Batterycompartment lock (P. 20)
Tripod socket
5-pin external flash socket (P. 195)● Unscrew to remove the cover before
connecting the bracket cable.
Connector cover
USB connector
DC-IN jack (P. 22)
12
Shooting informationV
iew
fin
der
/Mo
nit
or
ind
icat
ion
s 1 2 3 4
5678
9
1
HQ2048x1536
^0
@!
%
#$
&
)
*(
HQ2048x1536
ISO100SLOW1
1
Items Indications Ref. page
1 Shooting mode , , , , , , , P. 52, , , , , A, S, M, P
2 Aperture value F2.8 – F8 P. 58, 60
3 Shutter speed 16 – 1/1000 P. 59, 60
4 Exposure compensation –2.0 – +2.0 P. 119Exposure differential –3.0 – +3.0 P. 61
5 AF target mark P. 68
6 Number of storable 24 P. 71still pictures
Seconds remaining 24" P. 74
7 Record mode TIFF, SHQ, HQ, SQ1, SQ2 P. 112
8 Number of pixels 2048 x 1536, 1600 x 1200, P. 1131280 x 960, 1024 x 768, 640 x 480, 3200 x 2400,
2048 x1360
9 Memory gauge P. 16
0 Battery check P. 16
3:2
4321
When INFO is set to OFF When INFO is set to ON
, , ,
,
13
Shooting information (Cont.)
Items Indications Ref. page
! AE lock P. 89AE memory P. 86
@ Self-timer , P. 95, 97/Remote control
# Drive mode , , , , BKT P. 99
$ ISO ISO100, ISO200, ISO400 P. 117
% White balance , , , , , P. 120
^ Green lamp* O P. 62
& Flash stand-by (Lights) P. 71Camera movement (Blinks) P. 71
warning Flash charge (Blinks) P. 83
* Flash mode , , , SLOW1, P. 78
SLOW2, SLOW
( Spot metering/ , , , P. 85, 92,Macro mode/Super 94macro mode
) Sound recording P. 103, 104
MEMO
AEL
Vie
wfi
nd
er/M
on
ito
r in
dic
atio
ns
● The indications vary depending on the shooting mode.● The amount of the information displayed is selectable between two indication
options (P. 167).
Note
* When the subject is in focus, the green lamp lights up steadly. If the greenlamp is flashing, the camera cannot focus on the subject. Release theshutter button and try to half press again.
14
When INFO is set to OFF When INFO is set to ON
Movie playback information
20
&
*
HQ HQSIZE: 320x240
’02.09.12 12:30FILE: 100–0020
Playback information
Still picture playback information
Vie
wfi
nd
er/M
on
ito
r in
dic
atio
ns
When INFO is set to OFF When INFO is set to ON
HQ
’02.09.12 12:30 20
HQSIZE: 2048x1536F2.8 1/800 +2.0
ISO100’02.09.12 12:30FILE: 100–0020
#$%
^
0!@
15
Playback information (Cont.)
● The indications that appear on a movie picture that has been selected anddisplayed from the thumbnail display are different from those that appearwhen the movie picture is displayed using the movie play function.
● The indications vary depending on the setting used when shooting.● The amount of the information displayed is selectable between two indication
options (P. 167).
Note
Items Indications Ref. page
1 Battery check P. 16
2 Print reserve P. 186, 188
3 Number of prints x1 – x10 P. 186, 188
4 Sound recording P. 127
5 Protect P. 40, 148
6 Record mode TIFF, SHQ, HQ, SQ1, SQ2 P. 112
7 Date ’02. 09. 12 P. 30
8 Time 12:30 P. 30
9 Frame number 20 –
0 Number of pixels 2048x1536, 1600x1200, P. 113(resolution setting) 1280x960 etc.
! Aperture value F2.8 – F8 P. 58, 60
@ Shutter speed 16 – 1/1000 P. 59, 60
# Exposure compensation –2.0 – +2.0 P. 119
$ White balance , , , , , P. 120
% ISO ISO100, ISO200, ISO400 P. 117
^ File number 100 – 0020 –
& Movie mark P. 130
* Frame number/ Displays the number of the –Recording time movie frame currently displayed:
20During movie playback, therecording time appears as follows:
Vie
wfi
nd
er/M
on
ito
r in
dic
atio
ns
,
Total recordingtime
Playing time 0" / 15"
16
Memory gauge and battery check
If the remaining battery power is low, the battery check indication changes asfollows when the camera is turned on or while the camera is in use.
Battery check
Lights(green)
Remaining powerlevel: high
Blinks(red)
Remaining power level:low. Replace with newbatteries.
No indication
Remaining power level:exhausted. BATTERYEMPTY is displayed.Replace with new batteries.
Memory gaugeThe memory gauge lights when you take a still picture. When the gauge is lit,the camera is storing a picture on the card (an xD-Picture Card or aSmartMedia card). The memory gauge indication changes as shown belowdepending on the shooting status. When the memory gauge is full, wait untilthe light goes out before you take any more shots.
Before shooting(Gauge is off)
One picturetaken (Lit)
More thantwo taken
(Lit)
No more picturescan be taken
(Fully Lit)
Shoot Shoot Shoot
WaitWaitWait
Vie
wfi
nd
er/M
on
ito
r in
dic
atio
ns
● The memory gauge does not appear during movie recording.Note
17
How to use this manual
Ho
w t
o u
se t
his
man
ual
Chapte
r 8
Information display
Lets you select the amount of shooting information displayed in the shootingor playback mode. The shooting information is displayed approximately 3seconds, then the monitor returns to the regular display. For details on eachpiece of information displayed, see pages 12 to 15.
Mode dial setting
, , , , , , , A/S/M, P:
In the top menu, select MODE MENU TSETUP T INFO T ON. Press . Press
again to cancel the menu.
:
Press to display the top menu.Pressing É turns INFO on.
● All shooting information is displayed.● To turn INFO off in the playback mode,
press again to bring up the top menuÉ
Ññ buttons
button
Shooting mode setting — Mode dial (Cont.)
1 Select S from “A/S/M mode setting”.See P. 52.
2 To set a faster shutter speed,press Ñ.
To set a slower shutter speed,press ñ.
� If the shutter speed is displayed in greenThe shutter speed setting will provide
Shutter speed
1/650
Mode dial setting
Shutter speed setting — Shutter priority shooting
Ññ buttons
You can set the mode dial to any of the positions shown.
Select the menu items in order by following the arrows (P. 43).
If a button is shown in gray, press it as part of the step.
Ñ, ñ, É and í used in instructions correspond to the buttons onthe arrow pad as shown.
Ñ
ñ
É í
18
Chapte
r 1 1 Attach the lens-securing string to the
lens cap as shown in the illustration.
2 Thread the camera strap loop throughthe camera’s strap eyelet from themonitor side.
3 Thread the camera strap loop throughthe lens-securing string loop.
4 Thread the other end of thestrap (which you will havearound your neck) through thecamera strap loop that hasalready gone through thecamera’s strap eyelet. Pull onthe strap attached to thecamera’s strap eyelet to makesure it is securely fastened.
5 Adjust the strap length.
Attaching the strap
Monitor
Stringloop
Chapte
r 1
Ge
ttin
g s
tart
ed
Strap eyelet
19
Chapte
r 1
Attaching the strap (cont.)
● Be careful with the strap when carrying the camera, as the strap can easilycatch on protruding objects, causing serious damage.
● Attach the strap correctly following the instructions above so that thecamera does not fall off. If the strap is attached incorrectly and the camerafalls off the strap, Olympus is not responsible for any damages.
Note
20
Chapte
r 1
1 Make sure the camera is turned off;● The monitor is off.● The viewfinder is off.● The lens is not extended.
2 Slide the battery compartment lock on thebattery compartment cover in the direction of
.
3 Slide the battery compartment cover in thedirection of arrow (A) with your fingertip, thenlift it in the direction of arrow (B) to open it.● Do not use your fingernail, as this could result in
injury.
4 Insert the batteries in the directionshown in the illustration.
Loading the batteries
This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries,NiCd batteries, alkaline batteries or lithium batteries.
When using AA(R6) batteries
When using CR-V3lithium battery packs
Battery alignment
A
B
21
Chapte
r 1
Loading the batteries (Cont.)
5 Press the battery compartment coverdown in the direction of arrow (C),hold it pressed at the ñ mark againstthe camera, and then slide it in thedirection of arrow (D).● When pressing the battery
compartment cover shut, be sure topress the center of the cover, as it maybe difficult to close properly by pressingthe edge.
● Make sure the cover is completelyclosed.
6 Slide the battery compartment lock onthe battery compartment cover in thedirection of .
C
D
● If the camera is left for 1 hour with the batteries removed, all the internalsettings except those below will revert to the default settings.— MY MODE SETUP, SCREEN SETUP, SLEEP, , VIDEO OUTPUT,
SHORT CUT, CUSTOM BUTTON
Note
22
Chapte
r 1
Power plug
AC adapter
AC wall outlet
DC-IN jack
Connection cord plug
Loading the batteries (Cont.)
The following types of batteries or AC adapter can be used. Choose thepower source best suited to the situation.
� Lithium battery pack (Not rechargeable)Since the CR-V3 lithium battery pack has an exceptionally long servicelife, it is convenient when traveling. Do not peel off the label on the lithiumbattery pack. If an insulating sticker is attached on its terminals, removeonly that sticker before use.
� NiMH batteries (Rechargeable batteries)Olympus NiMH batteries are rechargeable and economical. In addition, thelow-temperature resistance makes them a good choice for cold areas.
� AA (R6) alkaline batteriesWhen you need batteries in a hurry, you can use AA (R6) alkalinebatteries, which are easy to obtain anywhere. However, the number ofpictures that you can store in the camera may vary considerably with AAalkaline batteries, depending on the battery manufacturer, camerashooting conditions, etc. Use this type of battery only when you have noother choices available. Turn off the monitor whenever possible to savepower when using AA alkaline batteries.
� AC adapterAn optional Olympus CAMEDIA-brand AC adapter allows you to poweryour digital camera from a common AC wall outlet. Be sure to use thespecified AC adapter. Using of an AC adapter is recommended for time-consuming tasks such as image uploads to a PC.Use an AC adapter designed to operate on the AC voltage in the regionthe camera is being used.Consult your nearest Olympus dealer or Service center for details.
Selecting optional batteries or AC adapter
23
Chapte
r 1
Loading the batteries (Cont.)
● Manganese (zinc-carbon) batteries cannot be used.● The lives of batter ies may vary according to the type of battery,
manufacturer, camera shooting conditions, etc.● If the battery power runs out while the camera is connected to a PC, image
data may be corrupted. It is recommended that you use the optional ACadapter when transferring images to a PC. Do not disconnect or connect theAC adapter while the camera is communicating with the PC.
● Power is consumed continuously during the conditions described below.This could reduce the number of pictures that can be taken.•When the monitor is turned on.•Repeated auto-focus by pressing the shutter button halfway.•Repeated power zoom adjustments.•When the Fulltime AF mode is turned on.•When communicating with a PC.
● When using an AC adapter, power is supplied to the camera by the ACadapter even if batteries are loaded in the camera. The AC adapter does notcharge batteries that may be in the camera; it only provides power to thecamera.
● Do not remove or load batteries and/or do not disconnect or connect the ACadapter while the camera is turned on. Doing so could damage thecamera’s settings or functions.
● Carefully read the “Safety Precautions” included in the package and the ACadapter’s instructions before use.
Note
24
Chapte
r 1
Card basics
This reference manual uses the term “card” when referring to an xD-PictureCard or SmartMedia card. The pictures will be recorded on the card insertedin the camera. Make sure that a card is inserted into the camera beforeshooting.
What is Card?Images recorded and stored on a card can easily be deleted, overwritten,and/or edited on a PC.
Compatible Cards● xD-Picture Card (16 MB – 128 MB)● SmartMedia (4 MB – 128 MB)
1 Contact areaComes into contact with thecamera’s signal read contact.
2 Write-protect area(SmartMedia only)Attach the provided wr ite-protect seal when you want toprotect your data fromaccidental erasure oroverwriting. Do not attach thewrite-protect seal if you want torecord images on a card.
3 Index area (SmartMedia only)Use the index label to indicatethe card’s contents.
● 5 V SmartMedia cards cannot be used with this camera.● This camera may not recognize a non-Olympus card (such as 3 V (3.3 V))
or a card that was formatted on another device (such as a PC, etc.). Beforeuse, be sure to format the card on this camera (P. 151).
Note
xD-Picture Card SmartMedia
1
2
3
1 Make sure the camera is turned off.● The monitor is off.● The viewfinder is off.● The lens is not extended.
2 Open the card cover.
3 � Inserting the cardInsert the card in theappropriate direction.● xD-Picture Card and
SmartMedia card cannot beinserted into the camera atthe same time. You can onlyinsert one of the other at anygiven time.
● Hold the card in a straight orientation to the card slot, and then insert itfully until it is locked securely. Do not attempt to insert the card at anangle.
● Note the orientation of the card. If it is inserted incorrectly, it maybecome jammed.
� Ejecting the cardPush the card slowly toward the inside of thecard slot with your finger until it stops.Continue to hold the card so that it does notforcibly eject, then remove the card from theslot by pulling it straight out.
25
Chapte
r 1
Card basics (Cont.)
Inserting/Removing the card
xD-Picture Card
Insertion directionindication
SmartMedia
26
Chapte
r 1
Card basics (Cont.)
● The card may eject forcibly if you take your finger off the card immediatelyafter pushing it.
● Never open the card cover, remove the batteries, or disconnect the optionalAC adapter while the camera is on. Doing so could destroy all data on thecard. In addition, never use the camera with the card inserted insecurely. Aloose connection may result in being unable to access the card or recordingpictures on the card, or loss of data. Destroyed data cannot be restored.
● It is possible to set up the camera’s functions without a card inserted in it,however you cannot shoot or play back images.
Note
4 Close the card cover securely until it clicks.
27
Chapte
r 11 Before turning the camera on, press
the tabs on the lens cap in thedirection of the arrows and pull thecap off to remove it.
2 Press the POWER switch to turn on thecamera.● The lens moves out when the mode dial
is set to any position other than .● The viewfinder turns on.
3 Press the POWER switch again to turnthe camera off.
Power on/off
Lens cap
POWER switch
● To save battery power, the camera automatically enters Sleep mode if youleave the camera untouched while the power is on. The camera becomesactive again as soon as you touch any operational button. The sleep timeinterval can be set in shooting modes other than mode (P. 173).
● Do not place credit card, commuter passes, or magnetically coded floppydisks near the camera. Doing so may destroy data stored on such items.
Note
28
Chapte
r 1
Power on/off (Cont.)
Monitor appearance and sound
When the power is turned on/off, astartup/shutdown image is displayed on themonitor and a startup/shutdown sound isplayed.You can set this function to display yourfavor ite image and you can select astartup/shutdown sound (P. 175).
Startup/Shutdown image (factory default setting)
29
Chapte
r 1
Power on/off (Cont.)
When the power is turned on, the camera checks the card automatically.
Indications TIPS
There is no card in the camera or the cardis not locked into place.T Insert a card. If a card is already inserted,
remove it and insert it again.
There is a problem with the card.T Use a different card.
The card cannot be recognized with thiscamera system.T Format the card.
● Formatting erases all data saved on thecard.
1 Press ñ to select FORMAT, thenpress .
● The FORMAT screen appears.
2 Press Ñ to select YES, then press to start formatting.● When formatting is complete, the
camera is ready for shooting.
FORMAT
YES
NONO
CAUTION ERASING ALL
Card check
30
Chapte
r 1
1 Set the mode dial to , then pressthe POWER switch to turn on thecamera.● Be sure to take off the lens cap before
you turn the camera on.
2 Press .● The monitor turns on automatically and
the top menu appears.
3 Press ñ on the arrow pad to select .
Date/time setting
It is possible to set the date/time of the camera’s built-in clock. Since the dateand time are saved with recorded pictures, be sure to set it correctly.
Mode dial
Arrow pad
POWER switch
button
CARD SETUP
DRIVE
Mode dial setting
31
Chapte
r 14 When is selected on the screen,
press Ññ to select the date format.● Select any one of the following formats:
D-M-Y (Day/Month/Year)M-D-Y (Month/Day/Year)Y-M-D (Year/Month/Day)
● This step and the following steps showthe procedure used when the date andtime settings are set to Y-M-D.
5 Press í to move to the year setting.
6 Press Ññ to set the year. When theyear is set, press í to move to themonth setting.● Repeat this procedure until the date and
time are completely set.● To move back to the previous setting,
press É.● The camera can only display the time in
“consecutive hours,” or what iscommonly known as military time. Forexample, 2:00 p.m. would display as14:00 hours — in other words, 12 hours+ 2 hours = 14:00 hours.
Date/time setting (Cont.)
SELECT SET GO
SELECT SET GO
The first two digits of the yearcannot be changed.
screen
SELECT SET GO
32
Chapte
r 1
Date/time setting (Cont.)
7 Press .● For the most accurate possible setting,
press when the time is actually at 00seconds. The camera’s built-in clockstarts when you press .
8 To turn the camera off, press thePOWER switch.● The lens retracts.
● The current settings remain the same even when the power is turned off,unless they are readjusted.
● The date setting will be canceled if the camera is left with no batteries forapproximately 1 hour. If this happens, you will need to set the date again.
Note
33
Chapte
r 1
Selecting a language
1 Set the mode dial to P, then press thePOWER switch.● Be sure to take the lens cap off before
you turn the camera on.
2 Press .● The monitor turns on automatically and
the top menu appears.
3 Press í on the arrow pad to selectMODE MENU.
4 Press Ññ to select SETUP, then pressí.● The items in the SETUP menu appear.
Select a language for on-screen display. This reference manual shows theEnglish on-screen display in illustrations and explanations.
Mode dial
Arrow pad
POWER switch
button
MODE MENU
DRIVE
WB
CAM
CARD
PIC
ON
ONENGLISH
SETU
P
ALL RESET
ONREC VIEWPWPW SETUPSETUPONON/OFFOFF
Top menu
Mode dial setting
34
Chapte
r 1
Selecting a language (Cont.)
5 Press Ññ to select , then pressí.● The available languages are displayed.● Languages vary depending on the area
of purchase.
6 Press Ññ to select a language. Press.
● The camera returns to the SETUPmenu.
● If is pressed again, the menu willdisappear.
7 To turn the camera off, press thePOWER switch.● The lens retracts.
Factory default setting: ENGLISH
● The current settings remain even when the power is turned off, unless theyare readjusted.
Note
CAM
CARD
PIC
ON
ONENGLISH
SETU
P
ALL RESET
REC VIEWON
PWPW SETUPSETUPONON/OFFOFF
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
Menu item Language
ENGLISH English
FRANCAIS French
DEUTSCH German
ESPAÑOL Spanish
35
Chapte
r 1
Adjusting the diopter
Hold the camera firmly with both hands while keeping your elbows at yoursides to prevent camera movement. Keep your fingers and the strap awayfrom the lens and flash.
Correct
Horizontal grip Vertical grip
Lens
Do not hold this partof the lens.
Top view
Holding the camera
Flash
Set the mode dial to , then press the POWER switch to turn on thecamera. Turn the diopter adjustment dial to see the AF target mark clearly.
AF target mark
Viewfinder Diopter adjustment dial
36
Chapte
r 2
Card access lamp
Chapte
r 2
Qu
ick
-sta
rt g
uid
e
Point the camera towards asubject while viewing through theviewfinder.
2
To focus on the subject, press the shutterbutton halfway, slowly and gently.● When the subject is in focus, the green
lamp lights up. If the green lamp isflashing, the subject is not in focus.Release the shutter button and repeatstep 3. If the camera still cannot focus,see page 63.
To start shooting, press the shutter button gently all the way (fully).● If the flash is up, it will fire automatically when required (P. 78).● The card access lamp blinks and the camera begins storing pictures on
the card.
Taking still pictures
Remove the lens cap. Set the mode dial to andpress the POWER switch.
1
3
4
● Never open the card cover, remove the batteries, or disconnect an optionalAC adapter when the card access lamp is blinking. Doing so could destroystored pictures and prevent storage of pictures you have just taken.
Note
Green lamp
Number of storable still pictures
37
Chapte
r 2
Recording movies
Point the camera towards asubject while viewing through theviewfinder or the monitor.
2
Press the shutter button halfway.● The green lamp lights up.
Press the shutter button all theway to start recording.● The card access lamp blinks and the
camera starts writing the movie to thecard.
● During movie recording, lightsin red.
Press the shutter button all the way again to stop recording.● If the displayed seconds remaining reach “0”, shooting finishes
automatically and the camera starts writing the movie to the card.
Remove the lens cap. Set the mode dial to and pressthe POWER switch.
1
3
4
5
Card access lamp
Seconds remaining
Green lamp
38
Chapte
r 2
Viewing still pictures
Display the desiredpictures using thearrow pad.● Pictures indicated
by are movieframes (P. 39).
Set the mode dial to (playback mode) and press thePOWER switch.
You can play backpictures while thecamera is in theshooting mode(Quick View).Press twicequickly. To return toshooting, press theshutter buttonhalfway.
1
2
● If the camera is not operated for over 3 minutes when the monitor is on, themonitor turns off automatically. To turn the monitor on again, press orany button.
Note
Zoom lever
Turning the zoomlever towards
Jumps to the picture10 frames behind.
Displays thenext picture.
Displays the previous picture.
Jumps to the picture10 frames ahead.
T: Enlarges thepicture (P. 139).
W: Displaysmultiple picturesat the sametime (P. 140).
39
Chapte
r 2
Playing back movies
Press Ñ on the arrow pad toselect MOVIE PLAY.
Press Ññ to select MOVIEPLAYBACK. ● To exit MOVIE PLAY screen,
press É.
3
MODE MENU
MOVIE PLAY
INFO
MOVIE PLAY
CANCEL SELECT GO
EDIT
MOVIE PLAYBACK
INDEX
Display the movie frame (picture with ) you want to play back (P. 38).
1
4
Press to start Playback.● When playback finishes, the screen returns to the beginning of the
movie.● If is pressed again when the movie playback is finished, the
MOVIE PLAYBACK screen appears. To exit the movie playbackmode and return to the MOVIE PLAY screen, press Ññ to selectEXIT, then press .
5
● Never open the card cover, remove the batteries, or disconnect an optionalAC adapter when the card access lamp is blinking. Doing so could destroystored pictures and prevent storage of pictures you have just taken.
Note
Press . ● The top menu appears.2
40
Chapte
r 2
Protect
Display the picture you want to protect (P. 38).1
Press .● To cancel protection, press again.2
HQ
Displayed when a pictureis protected.
● Protected pictures cannot be deleted with the ALL ERASE (all-frameerase) function, but they can be deleted with the FORMAT (format)function.
● Protection cannot be applied to pictures stored on a SmartMedia card witha write-protect adhesive seal.
Note
41
Chapte
r 2
When the ERASE screenappears, press Ñ to select YES.● To cancel erasure, press ñ to
select NO.
3
Erasing pictures
ERASE
YES
N O
SELECT GO
Display the picture you want to erase (P. 38).1
Press (erase).2
Press to erase the picture.4
● Protected pictures cannot be deleted.● Make sure the card is not write-protected. If a SmartMedia card is write-
protected, you will not be able to erase pictures.● In addition to ERASE, ALL ERASE is also available (P.150).
Note
42
Chapte
r 3
Chapte
r 3
Usi
ng
th
e m
en
us
What are the menus?
When you turn on the camera and press , the menu that appears on themonitor is generally called “the top menu”. Many functions of this camera areaccessed using the menus. Below, this chapter explains how the camera’smenus work, using examples of menus displayed in the P (Program) mode.The top menu varies depending on the mode (P. 45).
WB
DRIVE
MODE MENU
PICTU
RECA
MSE
TCA
RD
WB
CONTRASTCONTRASTSHARPNESS
HQSQ1SQ2
TIFFSHQ
PIC
SET
CARD
ISODRIVE
AUTOCAME
RA
SLOW1SLOW
A/M/S
● Use the arrow pad to display shortcutmenus or the MODE MENU.
Shortcut menus
Top menu
MODE MENU
● Take you directly to the settingscreens.
● Display operational buttons at thebottom of the screen, and let youselect items by pressing Ññ.
● The shortcut menus can be replacedin any shooting mode except and (P. 160).
● Lets you set various functions such asthe white balance, etc.
● Categorizes the settings into 4 tabsaccording to function.
● Select the CAMERA, PICTURE,CARD or SETUP tab by pressingÑñ. The menu for the selected tabmenu appears.
Tab
43
Chapte
r 3
How to use the menu
1 Press to display the topmenu. Press í.
2 Press Ññ to select a tab andpress í.
WB
DRIVE
MODE MENU
PICTU
RECA
MSE
TCA
RD
AUTO
HQHQ
WB
SHARPNESSCONTRAST
PIC
SET
CARD
ISODRIVE
AUTOCAME
RA
SLOW1SLOW
A/M/S
CAM
SET
PIC
CARD SETUPCARD SETUP
CARD
CAM
CARD
PIC
ON
ONENGLISH
SETU
P
ALL RESET
ONREC VIEWPWPW SETUPSETUPONON/OFFOFF
P top menu
CAM: CAMERA tabFunctions for shooting: selectingdrive modes, ISO sensitivity, etc.
PIC: PICTURE tabFunctions for adjusting images:selecting record modes, adjustingwhite balance, etc.
CARD: CARD tabCard functions, such asformatting.
SET: SETUP tabFunctions for changing camerasettings: date and time, shortcutsettings, etc.
CAMERA tab
PICTURE tab
CARD tab
SETUP tab
Pressing Éreturns to thetab selection.¥
˙
¥
˙
¥
˙
44
Chapte
r 3
How to use the menu (Cont.)
3 Press Ññ to select an itemand press í.
4 Press Ññ to select the setting.Press to save the setting.
● To go back to shooting, pressagain.
SETU
PCA
MCA
RDPI
C
ONALL RESET
ON
ENGLISH
ONREC VIEWPWPW SETUPSETUPONON/OFFOFF
CAM
CARD
PIC
ON
ONENGLISH
SETU
P
ALL RESET
REC VIEWON
PWPW SETUPSETUPONON/OFFOFF
CAM
CARD
PIC
SETU
PALL RESET
REC VIEW OFFON
PWPW SETUPSETUPONON/OFFOFF
CAM
CARD
PIC
SETU
P
ALL RESET
REC VIEW OFFON
PWPW SETUPSETUPONON/OFFOFF
¥
˙
¥
˙The green frame moves to theselected item.
Pressing É orreturns to the
item selection.
● Not all items can be selected. The items that can be selected depend on thestatus of the camera and the settings. For example, in the mode, youcannot select 2 IN 1 in the CAMERA tab category.
● If you press the shutter button to take a picture while the menu is displayed,you will take pictures with the currently selected settings.
● If you want to save the settings after the camera is turned off, set ALLRESET to OFF (P. 155).
Note
45
Chapte
r 3
Modes & Shortcut Menus
CARD SETUP
DRIVE
top menu
MODE MENU
DRIVE
WB
MODE MENU
DRIVE
WB
A/S/M top menuP top menu
MODE MENU
DRIVE
WB
top menu
MODE MENU
WB
MODE MENU
DRIVE
WB
top menu (same as in , , , or )top menu
MODE MENUINFO
top menu (for still pictures)
MODE MENU
MOVIE PLAY
INFO
top menu (for movies)
The menu items displayed vary depending on the setting of the mode dial.For an overview of each menu item, see the table on the next page.
46
Chapte
r 3 Top menu functions (See each reference page for details.)
Modes & Shortcut Menus (Cont.)
Menu item Function Ref.page
DRIVE Selects a mode from (single-frame shooting), P. 99(sequential shooting), (High-speed
sequential shooting), (AF sequential shooting) or BKT (auto bracketing).
Records sound while shooting a movie. P. 104
Sets the record mode. P. 112
WB Sets the appropriate white balance according P. 120to the light source.
CARD SETUP Formats cards. P. 151
Sets the date and time. P. 30
INFO Changes the amount of shooting P. 167information displayed on the monitor.
Displays a histogram showing the P. 171brightness and contrast of the subject on the LCD monitor.
Runs through all saved pictures one after P. 129another.
MOVIE PLAY Plays back movies.You can also edit movies P. 130or make indexes of still-shots from movies.
Sh
oo
tin
g m
od
eP
layb
ack
mo
de
47
Chapte
r 3
Tabs & MODE MENU functions(shooting)
CAMERA tabPI
CSE
TCA
RD
ISODRIVE
AUTOCAME
RA
SLOW1SLOW
A/M/S
In shooting mode (when the mode dial is set to , , , , , , , , A/M/S or P), the MODE MENU functions are categorized into 4 tabs. PressÑñ to select a tab and display the associated menu items. When mode is selected, most of the functions under the MODE MENU are setautomatically and MODE MENU does not appear in the Top menu.
CAMERA tab
CARD tab
SETUP tab
PICTURE tab
DRIVE Selects a mode from (single-frame shooting), P. 99(sequential shooting), (high-speed
sequential shooting), (AF sequential shooting) or BKT (auto bracketing).
ISO Selects ISO sensitivity (based on normal camera P. 117film) from AUTO/100/200/400.
A/S/M Selects a shooting mode from A (Aperture priority P. 52shooting), S (Shutter priority shooting), M (Manual shooting).
1/2/3/4 Selects a shooting mode from MY MODE 1, P. 53MY MODE 2, MY MODE 3, MY MODE 4.
Adjusts the flash intensity for different shooting P. 84conditions.
SLOW Adjusts the flash for slow shutter speeds. P. 79, 81
NOISE Reduces noise on images during long exposures. P. 126REDUCTION
MULTI Determines the best exposure by metering up to 8 P. 86METERING different spots in the image.
DIGITAL The maximum optical zoom (10x) can be extended P. 77ZOOM even more by the 3x digital zoom, making
possible up to approximately 30x zoom.
4321
48
Chapte
r 3
Tabs & MODE MENU functions (shooting) (Cont.)
CARD tab
PICTURE tab
CAMERA tab (Cont.)
CARD SETUP Formats cards. P. 151
Sets the record mode resolution. P. 112
WB Sets the appropriate white balance according to P. 120the light source.
Lets you make fine changes to the white balance P. 122manually.
SHARPNESS Adjusts the sharpness of images. P. 123
CONTRAST Adjusts the contrast of images. P. 124
SATURATION Adjusts the level of color depth without changing P. 125tint.
FULLTIME Keeps the image in focus at all times without P. 67AF having to press the shutter button halfway.
AF MODE Selects the auto focus method (iESP or SPOT). P. 66
Records sound while taking still pictures. P. 103
For macro shooting as close as 4cm (1.6 inches) P. 94away from the subject.
PANORAMA Allows panorama pictures to be taken with P. 105Olympus CAMEDIA-brand cards.
2 IN 1 Combines two pictures taken in succession and P. 108stores them as a single picture.
FUNCTION Lets you shoot pictures in black & white or sepia P. 110tone.
AF AREA Lets you change the position of the AF target P. 68mark using the arrow pad.
INFO Changes the amount of shooting information P. 167displayed on the monitor.
Displays a histogram showing the brightness and P. 171contrast of the subject on the LCD monitor.
49
Chapte
r 3
Tabs & MODE MENU functions (shooting) (Cont.)
SETUP tabALL RESET Selects whether to keep the current camera P. 155
settings when you turn off the power.
Selects a language for on-screen display. P. 33
PW ON/OFF Sets the picture displayed on the monitor when P. 175SETUP the power is turned on/off.
REC VIEW Selects whether to display the image being P. 172recorded onto the card.
Sets the beep sound (used for warnings, etc.) P. 169to OFF/LOW/HIGH.
SHUTTER Sets the tone and its volume. There are 2 P. 170options for each selection.
SLEEP Sets the sleep timer. P. 173
MY MODE Customizes settings which are activated in the P. 163SETUP mode.
FILE NAME Chooses how to name files and folders of P. 179images to be saved.
PIXEL Checks the CCD and image processing P. 181MAPPING circuit for errors.
Adjusts the monitor brightness. P. 168
Sets the date and time. P. 30
m/ft Sets the measurement units (m/ft) used during P. 183manual focus.
VIDEO Selects NTSC or PAL according to your TV’s P. 182OUTPUT video signal type. TV video signal type differs
depending on the region.
BATTERY Enables camera operation with reduced P. 174SAVE power consumption.
SHORT CUT Lets you assign frequently used functions as P. 160shortcut menus on the top menu.
CUSTOM Lets you assign a frequently used function P. 157BUTTON to the camera’s custom button.
50
Chapte
r 3
Tabs & MODE MENU functions(playback)
When the playback mode is selected (the mode dial is set to ), menu itemsunder the MODE MENU in still picture playback differ from those in movieplayback. In the same manner, the items in the Top menu differ.
CARD
SET
CARD SETUP
CAME
RAED
ITSE
TCA
RD
During movie playbackDuring still picture playback
EDIT tab
CARD tab
PLAY tab
Makes the file size smaller and saves it as a new P. 142picture.
Enlarges a part of a picture and saves it as P. 143a new picture.
CARD Formats cards (FORMAT), or erases all P. 151SETUP images on the card (ALL ERASE).
During playback, adds sound to still pictures P. 147or changes sound that has been recorded.
51
Chapte
r 3
Tabs & MODE MENU functions (playback) (Cont.)
SETUP tabALL RESET Selects whether to keep the current camera P. 155
settings when you turn off the power.
Selects a language for on-screen display. P. 33
PW ON/OFF Sets the picture displayed on the monitor when P. 175SETUP the power is turned on/off.
SCREEN Registers a stored picture so that you can select P. 177SETUP it in PW ON/OFF SETUP.
VOLUME Adjusts the volume of the sound during playback. P. 146
Sets the beep sound (used for warnings, etc.) P. 169to OFF/LOW/HIGH.
Adjusts the monitor brightness. P. 168
Sets the date and time. P. 30
VIDEO Selects NTSC or PAL according to your TV’s video P. 182OUTPUT signal type. TV video signal type differs depending
on the region.
Selects the number of frames in the index display. P. 141
52
Chapte
r 4
Chapte
r 4
Sh
oo
tin
g b
asi
cs
Shooting mode setting — Mode dial
Set the mode dial to any of the followingpositions and press the POWER switch.● Always remove the lens cap before turning
on the camera since the lens automaticallyextends when the camera turns on.
Shooting mode: , , ,, , , , , ,
A/S/M, P
When the mode dial is set to A/S/M, you canselect any of the following shooting modes.
Shooting mode:
A (Aperture priority shooting)
S (Shutter priority shooting)
M (Manual shooting)
A/S/M mode setting
In the top menu, select MODE MENU TCAMERA T A/S/M T A, S or M. Press .Press again to cancel the menu.
Fctory default setting: A
Mode dial setting
Mode dial
button
POWER switch
Mode dial
53
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
When the mode dial is set to , you canselect any of the following shooting modes.Be sure to set up , or referring toMY MODE SETUP (P.163) before you usethese modes.
Shooting mode:
MY MODE 1 (My Mode shooting 1),
MY MODE 2 (My Mode shooting 2),
MY MODE 3 (My Mode shooting 3),
MY MODE 4 (My Mode shooting 4) 4321
432
mode setting
In the top menu, select MODE MENU TCAMERA T 1/2/3/4 T MY MODE 1,
MY MODE 2, MY MODE 3 or MYMODE 4. Press . Press again tocancel the menu.
Fctory default setting: MY MODE 11
4321
Mode dial setting
Mode dial
button
54
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
Shooting modes
Full-auto shootingAllows you to take still pictures using NO special functions or manualadjustments. The camera sets optimal focus and exposure. This is thesimplest of all shooting modes.
Portrait shootingSuitable for shooting a portrait-style image of a person. This mode features anin-focus subject against a blurred background. The camera automatically setsthe optimal shooting settings.
Sports shootingSuitable for capturing fast-moving action (such as sports) without blurring. Thecamera automatically sets the optimal shooting settings.
Landscape-Portrait shootingSuitable for taking photos of both your subject and the background. Thepicture is taken with the background as well as the subject in the foregroundin focus. The camera automatically sets the optimal shooting settings.
Landscape-Scene shootingSuitable for taking pictures of landscapes and other outdoor scenes. Both theforeground and the background are in focus. Blues and greens arereproduced vividly in this mode, the Landscape-Scene mode is excellent forshooting natural scenery. The camera automatically sets the optimal shootingsettings.
55
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
Night-Scene shootingSuitable for shooting pictures in the evening or at night. The camera sets aslower shutter speed than is used in normal shooting. For example, if you takea picture of a street at night in the mode, the lack of brightness willresult in a dark picture with only the sparkle of lights such as street lampsappearing. In the Night Scene shooting mode, the true appearance of thestreet can be captured. The camera automatically selects the optimal settingsfor this type of shooting condition. Since the shutter speed is slow, make sureyou stabilize the camera by using a tripod.
Self Portrait shootingEnables you to take a picture of yourselfwhile holding the camera. Point the lenstowards you and take a shot. The focus islocked on you (shooter). The cameraautomatically selects the optimal settings forthis type of shooting condition. Zooming is notpossible in this mode.
Movie recordAllows you to record movies. The camera sets the aperture and shutter speedautomatically.
56
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
My ModeYour favorite settings can be saved in MY MODE SETUP menu (in themenu’s SETUP tab). Customized settings are activated when the power isturned on in the mode. Settings such as aperture value, zoom position,etc. can be customized. In the mode, you can select exposure mode(shooting mode) from , , , , , , A, S, M or P. Settings can bespecified with the camera’s setting menus.In MY MODE SETUP, you can create and save up to 4 different My Modesettings. Items in the short cut menu can be different from those in the P or
, , , , , mode short cut menus. (P. 163).
A/S/M Aperture priority/Shutter priority/Manual shootingFor details on which shooting modes are selectable when the mode dial is setto A/S/M, refer to P. 52.
● A Aperture priority shootingAllows you to set the aperture manually. The camera sets the shutterspeed automatically. By decreasing the aperture value (F-number), thecamera will focus within a smaller range, producing a picture with a blurredbackground. Increasing the value will let the camera focus over a widerrange in the forward and backward directions, resulting in a picture inwhich both the subject and the background are in focus (P. 58).
Aperture (F-number) is decreased. Aperture (F-number) is increased.
57
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
● S Shutter priority shootingAllows you to set the shutter speed manually. The camera sets theaperture automatically. Set the shutter speed according to the subject andthe type of effect you want (P. 59).
● M Manual shootingAllows you to set the aperture and shutter speed manually. To check theexposure, refer to the exposure differential. This mode gives you morecreative control, allowing you to make the settings you need to get the typeof picture you want, regardless of optimum exposure (P. 60).
P Program shootingAllows you to take still pictures. The camera sets aperture and shutter speed.Other functions, such as flash modes and drive modes, can be adjustedmanually.
Setting the shutter speed higher letsyou capture fast-moving actionwithout blur. The subject will be clearand sharp, as if it is not moving.
Setting the shutter speed lowerblurs a moving subject, giving theimpression of movement.
58
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
1 Select A from “A/S/M mode setting”.See P. 52.
2
� If the aperture value is displayed in greenThe aperture setting will provide optimumexposure.
� If the aperture value is displayed in redThe aperture you have set is unsuitablefor the conditions.
� appears. T Press ñ to decrease theaperture value.
� appears. T Press Ñ to increase theaperture value.
To increase the aperture value(F-number), press Ñ.
To decrease the aperture value(F-number), press ñ.
Green: The aperture setting willprovide optimum exposure.
Red: The aperture setting isunsuitable for optimum exposure.
Zoom position F-number
Wide (W) f2.8* – f8
Tele (T) f3.5* – f8
Mode dial setting
*Open-aperture (the widest aperture setting)depends on the zoom position.
● When the flash is set to the auto-flash mode, the shutter speed is fixed at1/30 sec. in the maximum wide-angle, or 1/320 sec. in the maximumtelephoto, and can not go slower.
Note
Aperture setting — Aperture priority shooting
Ññ buttons
59
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
Shutter speed range: 1 to 1/1000 sec.
1 Select S from “A/S/M mode setting”.See P. 52.
2 To set a faster shutter speed,press Ñ.
To set a slower shutter speed,press ñ.
� If the shutter speed is displayed in greenThe shutter speed setting will provideoptimum exposure.
� If the shutter speed is displayed in redThe shutter speed you have set isunsuitable for the conditions.
� appears. T Press ñ to set the shutterspeed slower.
� appears. T Press Ñ to set the shutterspeed faster.
Shutter speed
1/650
Mode dial setting
Shutter speed setting — Shutter priority shooting
Ññ buttons
60
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
1 Select M from “A/S/M mode setting”.See P. 52.
2To set a faster shutterspeed, press Ñ.
To set a slower shutterspeed, press ñ.
To increase the aperture value(F-number), press É.
To decrease the aperture value(F-number), press í.
F-number: W T f2.8* – f8T T f3.5* – f8
Shutter speed: 16 to 1/1000 sec.
Mode dial setting
* Open-aperture (the widest aperture setting)depends on the zoom position.
Aperture & Shutter speed setting — Manual shooting
Arrow pad
61
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
� Exposure differential● The difference (ranging from –3.0 to +3.0)
between the exposure determined by thecurrently selected aperture and shutterspeed compared to the exposure levelconsidered optimal by the camera appearsin the upper right-hand corner.
● When the exposure differential is set to lessthan –3.0 or more than +3.0, the exposuredifferential appears in red.
● When you press the button, the barindicating current exposure settingsappears. Pressing the shutter buttonhalfway shows how much the currentexposure is different from the correctexposure.
Aperture (F-number) Shutter speed
Exposure differential
● To avoid camera movement, werecommend use of a tripod for any shotwhich uses a slow shutter speed.
NoteWhen the bar is displayed
When using My Mode, the shooting mode you selected with the menus in themode is activated. You can also save the shooting mode or function
settings you are currently using in the mode. If you set the mode dial toagain, the camera will activate these stored settings. In MY MODE
SETUP, you can create and save up to 4 different My Mode settings (P. 163).
Follow step in “ mode setting” (P. 53) to select MY MODE 1,MY MODE 2, MY MODE 3 or MY MODE4 .43
21
Mode dial setting
Using My Mode
● Although the settings you are using can be saved, the zoom position youare currently using may not be saved.
Note
62
Chapte
r 4 1 Point the camera towards the subject.
Place the AF target mark on thesubject while viewing through theviewfinder.Press the shutter button slowly andgently (halfway).● The green lamp lights up when the
subject is in focus and the exposure(brightness) is locked.
● The AF target mark moves to the pointwhere the focus is locked.
● The exposure (brightness) is alwayslocked to suite the center of theviewfider/monitor.
2 Press the shutter button all the way(fully).● The camera starts storing your pictures
on the card. While pictures are beingstored, the card access lamp blinks.
● mode: The camera starts recordinga movie.
3 ONLY for the (movie record) modeTo stop recording, press the shutterbutton all the way again. ● The card access lamp blinks and the
camera starts storing the movie on thecard. You cannot record another movieunti l the card access lamp stopsblinking.
How to use the shutter button
Shutter button
Viewfinder
AF target markGreen lamp
Card access lamp
63
Chapte
r 4
Focusing
When you place the AF target mark on asubject and press the shutter button halfway,the green lamp lights up. This means thatfocusing has been performed automatically.If the green lamp blinks, focusing is notcorrect. If this happens, use Manual focus (P. 69) or Focus lock (P. 65).
Auto focus
Shutter button
1 Subjects with low contrast 2 Subjects in excessively brightlight in the center of the frame
Under certain types of conditions auto focus may not work properly. If you runinto problems, try the procedure below.Conditions 1, 2 and 5Auto focus may not work properly. The green lamp may blink.Conditions 3 and 4Auto focus may not work properly even when the green lamp lights when youpress the shutter button down halfway.
When Auto focus does not work — Subjects that are difficult to focus on
Viewfinder
AF target markGreen lamp
64
Chapte
r 4
Focusing (Cont.)
Position the AF target mark in the viewfinder on an object that is the samedistance from the camera as the subject, then half-press the shutter button tolock focus, while keeping your finger half-pressed on the shutter button, framethe picture you want to shoot, and then fully press the shutter button (P. 65).
Hold the camera vertically, half-pressthe shutter button and hold it down tolock the focus. Re-position the camerahorizontally, compose the picture andthen fully press the shutter button totake the picture (P. 65).
5 Subjects with no vertical lines
3 Subjects at different distances 4 Fast-moving subjects
65
Chapte
r 4
Focusing (Cont.)
If the subject of your composition is not withinthe AF target mark and focusing is notpossible (as illustrated to the right), try thefollowing:
Focus lock — Focusing on subjects that are not inthe center of the frame
1 Position the AF target mark over thesubject. Press the shutter buttonhalfway to lock the focus.
Mode dial setting
Shutter button
AF target mark
Exposure(brightness) is alsolocked and thegreen lamp lightsup.
2 Compose your picture (point thecamera towards the subject) whilekeeping the shutter button pressedhalfway.
3 Press the shutter button all the way.
66
Chapte
r 4
Focusing (Cont.)
● The green lamp blinks.TFocus and exposure are not locked. Release your finger from the
shutter button and position your subject again. Repeat step 1 until thegreen lamp lights up without blinking.
● The frame in which you focus on a subject is different from theframe in which you meter the light.TUse AE lock (P. 89).
TIPS
Allows you to select the focus range of your subject.iESP : Focus selection is based on the entire picture on the screen. Even
when the subject is not in the center of the screen, focusing ispossible.
SPOT : Focus selection is based on the picture within the AF target mark.
iESP SPOT
AF MODE — Changing the focus range
67
Chapte
r 4
Focusing (Cont.)
In the top menu, select MODE MENUTCAMERA T AF MODE T iESP or SPOT.Press . Press again to cancel themenu.
Factory default setting: iESP
Mode dial setting
FULLTIME AF — A reliable time-saving way to focus
In the top menu, select MODE MENU TCAMERA T FULLTIME AF T ON. Press
. Press again to cancel the menu.
FULLTIME AF keeps the image on the monitor in focus at all times, withouthaving to press the shutter button halfway. This function reduces focusingtime. When OFF is selected, images cannot be focused unless the shutterbutton is pressed halfway.
Mode dial setting
● Battery life is shorter when Fulltime AF is used.● Fulltime AF is not available when the Battery Save mode is on.
Note
button
button
68
Chapte
r 4
Focusing (Cont.)
SELECT GO
AF AREA
1 In the top menu, select MODE MENUT CAMERA T AF AREA. Press í.● AF target mark position select screen
appears.
2 Press the arrow pad to move the AFtarget mark to the area you want tofocus on.● You can move the AF target mark
ver tically and horizontally from thecenter of the screen.
3 Press the shutter button to take apicture.● To restore the AF target mark to the
default position, press . The AFtarget mark is placed at the screen’scenter.
● Press again to cancel the AF targetmark selection.
Allows you to select the area you want to focus on by changing the position ofthe AF target mark. Set AF mode to SPOT in advance (P. 66).
Mode dial setting
AF AREA — Changing the position of the AF targetmark
Arrow pad
button
Shutter button
● AF AREA is not available when the DIGITAL ZOOM is set to ON.● The camera cannot save the AF target mark selection.
Note
AF target mark
69
Chapte
r 4
1 Hold down for more than 1 second.When the focus distance selectionscreen appears on the monitor, pressí to select MF.
2 Press Ññ to select the focusdistance. ● During operation, you can enlarge the
area you are focusing on. The lengthsshown are for reference only. When thelength indicator is moved to less than 2m (6.6 ft), the bar display automaticallyswitches to the 10 cm (4 inches)–2 m(6.6 ft) bar display.
3 Hold down for more than 1 secondto save the setting. ● MF appears in red.
4 Press the shutter button to take apicture.● Focus is locked at the distance you have set.
5 To cancel the saved MF setting, hold down again for more than 1second to display the focus distance selection screen.
Focusing (Cont.)
2m3m
8m5m
1/650P F4.5
Manual focus
If Auto focus is unable to lock, use manual focus.
Mode dial setting
2m3m
8m5m
1/650P F4.5
1/650P F4.5
70
Chapte
r 4
Focusing (Cont.)
● How to shoot while keeping the same focus distance at all timesTThe MF can be locked at the same length as when you perform focus
lock.1 Focus on anything within the AF target mark. Press the shutter
button halfway to lock focus.2 Without letting go of the shutter
button, hold down . The focusdistance screen appears. On thescreen, MF is selected and thefocus distance is the same as whenyou performed focus lock.
● Although MF is selected and the lengthindicator reaches the top of the bar, focusing is not possible at ∞.TFine adjust the focus distance with Ññ while watching the monitor.
● Although the focus distance is saved, the picture goes out of focus.T If the zoom lever is pressed after manual focus setting, the saved
focus distance may be changed. Try setting the focus again.
TIPS
2m3m
8m5m
1/650P F4.5
2m3m
8m5m
1/650P F4.56 To return to the AF mode, press É toselect AF, then press .● Manual focus is canceled.
71
Chapte
r 4
1/650P F4.5
Mode dial setting
Taking still pictures
1 Point the camera towards a subject.Place the subject on the AF targetmark.
2 Press the shutter button halfway.● When the focus and br ightness
(exposure) are locked, the green lamplights up.
● To warn you of camera movement, will blink. In this case, press the (flash) switch to pop up the flash (P. 81).
● To inform you that the flash is on stand-by, will light while the flash is up. Inthis case, the flash wil l f ireautomatically.
Shutter button
Green lamp
Number of storablestill pictures
AF target mark
(monitor) button
(flash) switch
72
Chapte
r 4
Taking still pictures (Cont.)
3 Press the shutter button all the way.● The bottom of the memory gauge lights,
the card access lamp blinks, and thecamera begins storing pictures on thecard.
● Number of still pictures that can bestored on a 16 MB card THQ record mode (2048 x 1536):Approx. 20SQ2 record mode (640 x 480 NORMAL):Approx. 165
● How to use the monitorTPress . The monitor turns on.
● The green lamp blinks.TDepending on the subject, focus and exposure (brightness) may not
be locked (P. 63).● How to brighten/darken the viewfinder and/or monitorTAdjust the brightness in the setting (P. 168).
TIPS
Memory gauge
Card access lamp
1/650P F4.5
73
Chapte
r 4
● How to check the area the camera isfocusing on T If you press while pressing the
shutter button halfway, the area youare focusing on is enlarged. Press the
button again to release thisfunction. However, this function is notavailable while the camera is digitallymagnifying the subject.
● How to automatically check the picture you have just takenTSet REC VIEW to ON (P. 172).
● Vertical lines on the viewfinder/monitor make it hard to see theimageTBright light (such as direct sunlight) may cause vertical lines (smear) to
appear on the viewfinder/monitor. This is not a malfunction.
Taking still pictures (Cont.)
● Press the shutter button gently using the ball of your finger. If the button ispressed hard, the camera may move and pictures may come out blurred.
● Recorded pictures will remain on the card regardless of whether the camerais turned off or the batteries are replaced or removed.
● Never open the card cover, remove the batteries, or disconnect an ACadapter when the card access lamp is blinking. Doing so could destroystored pictures and prevent storage of pictures you have just taken.
● The monitor consumes more battery power than the viewfinder.
Note
1/650P F4.5
74
Chapte
r 4
1 Point the camera towards a subject,and place the subject on the AF target.● In the mode, the total recording time
is shown. Total recording time dependson the memory capacity of the card.
● Focus and exposure are locked whenthe shutter button is pressed halfway.
2 Press the shutter button all the way tostart recording.● The card access lamp blinks and the
camera starts writing the movie to thecard.
● During movie recording, lights in red.
Recording movies
Seconds remaining*
* The displayed secondsremaining shows the time youcan record after pressing theshutter button.
Mode dial setting
1/650F4.5
Green lamp
AF target mark
Shutter button
Card access lamp
75
Chapte
r 4
Recording movies (Cont.)
3 Press the shutter button all the way tostop recording.● If there is any space left on the card, the
number of seconds remaining isdisplayed. You can star t recordinganother movie.
● When the remaining time displayed hasbeen used up, recording stopsautomatically and the camera startswriting the movie to the card. This willhappen regardless of whether or notyou press the shutter button to stopshooting.
● The flash cannot be used while recording movies. Optical zoom is notavailable when is set to ON while you are recording movies. To magnifythe subject, set DIGITAL ZOOM to ON (P. 77).
● The remaining time may decrease quickly depending on the card statusduring recording. In such a case, format the card before recording.
Note
Recording continues until you press the shutter button to stop recording orthe card’s memory is filled. If a single recording uses up all of the card’smemory, be sure to upload the movie to a PC or erase it in order to createspace on the card. Otherwise, you cannot edit the recorded movie.
Note on lengthy recording
76
Chapte
r 4 Telephoto/Wide-angle shooting is possible at up to 10x magnification (optical
zoom limit, equivalent to 38 mm – 380 mm on a 35 mm camera). Bycombining the digital zoom with the 10x optical zoom, zoom magnification upto approximately 30x is possible.
Zoom in on a subject(telephoto)
Press the zoom lever towardT to zoom in.
Shoot a wider view picture(wide-angle)
Press the zoom lever towardW to zoom out.
Zoom — Telephoto/Wide-angleshooting
Zoom lever
77
Chapte
r 4
Zoom — Telephoto/Wide-angle shooting (Cont.)
● Images captured with the digital zoom may appear grainy.● Camera movement is likely to happen at higher magnifications. Stabilize the
camera with a tripod, etc. to avoid camera movement.
Note
The cursormoves on thezoom indicatoraccording tothe zoommagnification.
Factory default setting: OFF
Indicatesdigital zoom
The color of thecursor changesfrom green toorange when itmoves into thedigital zoomarea.
Indicatesoptical zoom
1/650P F4.5Zoom area (Digital zoom ON)
1 In the top menu, select MODE MENUT CAMERA T DIGITAL ZOOM T ON.Press . Press again to cancel themenu.
2 Press the zoom lever towards T.● The zoom bar appears.
Mode dial setting
Digital zoom
Zoom lever
button
78
Chapte
r 4 You can select a flash mode appropriate to the lightning conditions and the
effect you want to achieve. You can also adjust the amount of light emittedusing the flash intensity control (P. 84).
The flash modes are as follows:
Automatically fires in low-light and backlight conditions.
This mode significantly reducesthe “red-eye” phenomenon byemitting pre-flashes a few timesbefore firing the regular flash.This mode works the same asthe auto-flash except for thepre-flashes.
Flash shooting
The subject’s eyesappear red.
The flash fires regardless ofavailable light. This mode isuseful for eliminating shadowson the subject’s face or forcorrecting the color shiftproduced by artificial lighting(especially fluorescent light).
Auto-flash
Red-eye reduction flash
● After the pre-flash, it takes about 1 second before the shutter is released, sodo not move the camera and hold it firmly after the pre-flash.
● Effectiveness may be limited if the subject is not looking directly at the pre-flashes, or if the shooting range is too far. Individual physical characteristics,such as light-colored eyes, may also limit effectiveness.
Note
Fill-in flash
● Fill-in flash may not have the desired effect under excessively bright light.Note
79
Chapte
r 4
Flash shooting (Cont.)
Flash off
● Since a slow shutter speed is automatically selected in low-light situationswhen in the flash off mode, the use of a tripod is recommended to preventyour pictures from being blurred by camera movement.
Note
The flash does not fire even in low-light conditions. Use this mode insituations where flash photography is not desired or is prohibited, or whenyou want to shoot a natural-looking twilight or night scene.
� SLOW1:1st curtain (front curtain)Regardless of the shutter speed, the flash fires right after the shutter fullyopens. This is how the flash usually works. The factory default setting is 1stcurtain.
The Slow Synchronization flash is designed for slow shutter speeds.Normally, when shooting with a flash, shutter speeds cannot go below acertain level to prevent camera movement. But when shooting a night scenebackground, fast shutter speeds can make the background too dark. SlowSynchronization flash allows both a slow shutter speed for the backgroundand a flash for the subject. Since the shutter speed is slow, make sure youstabilize the camera by using a tripod. Otherwise, camera movement maycause the image to be blurred.
Slow synchronization SLOW1 SLOW2 SLOW
80
Chapte
r 4
Flash shooting (Cont.)
� SLOW:
1st curtain with red-eye reduction This is for when you want to use Slow Synchronization yet also reduce red-eye. For instance, when shooting a person against a brightly lit nightbackground. A normal flash might make the person’s eyes red, but 1st curtainwith red-eye reduction lets you capture the background correctly and reducered-eye at the same time.2nd curtain with red-eye reduction is not available.
When the shutter speed is set to 4 seconds
4 0
4 sec.
Shutter closes Shutter fully opens
2nd curtainflash fires
1st curtainflash fires
(front curtain)(rear curtain)
� SLOW2:
2nd curtain (rear curtain)2nd curtain fires the flash just before the shutter closes. Changing the flashtiming can create interesting effects in your picture, such as expressing themovement of a car by showing the taillights streaming backwards. The slowerthe shutter speed, the better the effects turn out.Slowest possible shutter speed depends on the shooting mode:M mode : 16 sec.P, A, S, mode : 4 sec. (depending on the ISO setting)
81
Chapte
r 4
Flash shooting (Cont.)
Using the slow synchronization flash
In the top menu, select MODE MENU TCAMERA T SLOW T SLOW1,
SLOW2 or SLOW. Press . Pressagain to cancel the menu.
Factory default setting: SLOW1
Mode dial setting
1 Press the (flash) switch.● The flash pops up.
2 Press the (flash mode) buttonrepeatedly until the desired flash modeindication appears.● The flash mode changes as follows (if
all modes are available):
Mode dial setting
Using the flash
Shutter button
(flash mode) button
(flash) switch
button
Auto-flash
SLOW
Mode indication
82
Chapte
r 4
Flash shooting (Cont.)
● If the (flash mode) button is notpressed within 2 seconds after theselection screen is displayed, theselection screen disappears.
● To de-activate the flash (Flash Off mode), push the flash back into the
camera.
3 Press the shutter button halfway.● When the flash is ready to fire, the
mark lights (flash stand-by).
4 Press the shutter button all the way.● The flash fires.
Flash working rangeW (max.) : Approx. 0.1 m – 5.5 m (0.3 ft – 18 ft)T (max.) : Approx. 1.0 m – 4.4 m (3.3 ft – 14 ft)
�: Available, – : Not available, : Factory default setting
* The factory default setting and the available settings differ depending on which shootingmode is selected.
Mode
Drive mode
Auto-flash
SLOW1
SLOW2
SLOW
*A/S/M
PA S M
� � � � – �
� � � � – �
– � � � – �
– � � � � �
– � � � � �
– � � � – �
� � � � �
83
Chapte
r 4
Flash shooting (Cont.)
● The flash does not fire.TFlash does not fire in the following situations:
When shooting a bright subject, in the movie record mode, duringsuper macro (P. 94) or sequential shooting ( *, , *, BKT)(P. 99), when FUNCTION is set to WHITE BOARD/BLACK BOARD (P. 110), during Panorama shooting (P. 105).*Red-eye reduction flash ( ) and 1st curtain with red-eye reduction flash
( SLOW) are not available.
● The mark blinks (flash charge).TThe flash is charging. Remove your finger from the shutter button.
When the mark stops blinking, press it again.● Camera movement warning (auto, red-eye reduction ( ), fill-in( ))
When lights (camera movement warning), the shutter speed locks at itscurrent level. This helps prevent camera movement problems (shutterspeeds that are too slow can cause blur). However, if the zoommagnification is increased, the camera will increase the locked shutterspeed accordingly.Zoom position & shutter speed
TIPS
● The flash may not give you the optimum result in macro mode, especiallywith wide-angle shooting. Check the image on the monitor.
● If a conversion lens is attached to the camera, eclipsing may occur (P. 228).
Note
Zoom position Shutter speed
W (max.) 1/30 sec.
T (max.) 1/320 sec.
84
Chapte
r 4
Flash shooting (Cont.)
+1/3EV
Less brightNormal flash intensity More bright
You can adjust the amount of light emitted by the flash.In some situations, you may get better results by adjusting light emission.Examples include small subjects, distant backgrounds, or situations whenincreased contrast is desired.
In the top menu, select MODE MENU TCAMERA T . To increase the lightemission, press Ñ. To decrease the lightemission, press ñ. To complete thesetting, press .
Factory default setting: ±0
Ñ: Light emission is increased by a 1/3 EV each time you press the button.ñ: Light emission is decreased by a 1/3 EV each time you press the button.
(EV: Exposure Value)
Mode dial setting
Adjustable range
Flash intensity control
● The flash adjustment effect may not be sufficient if the shutter speed is toofast.
Note
Ññ buttons
button
85
Chapte
r 5
Chapte
r 5
Ad
van
ce
d s
ho
oti
ng
Metering modes — Metering thesubject brightness
There are 3 metering methods: Digital ESP metering, spot metering andmulti-metering.Digital ESP metering: Meters the center of the subject and the area around it.Spot metering: Meters the brightness of the center area of the viewfinder.Multi-metering: See P. 86.
Mode dial setting
1 Press repeatedly until (spotmetering) or (spot metering+macromode) appears.● The monitor turns on automatically.● The indications change as follows (if all
modes are available):
● If is not pressed within 2 secondsafter the selection screen is displayed,the selection screen disappears.
2 Press the shutter button to take apicture.
Factory default setting: Digital ESP
OFF(Digital ESP)
(P. 92)
When selecting
Spot metering
(macro/spot) button
Exposure is determined by metering within the AF target mark. In this mode,a subject can be shot with optimal exposure regardless of the backgroundlight. In the working range of the macro mode, spot metering is also available(spot metering+macro mode).
Spot metering — Selecting the metering area
Shutter button
86
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
Multi-metering — Metering the exposure of more thanone point in the frame
Meters the brightness of the subject at up to 8 different points to set theoptimal exposure based on the average brightness. Useful with high-contrastsubjects.
1 ∑ When using the camera in the A/S/Mmode, Multi-metering is not availablein the M mode. Set to any mode exceptM (P. 52).● If a function other than AE lock is
assigned to the button, assignAE lock to the button (P. 157).
2 Press to engage the spotmetering mode (P. 85).
3 In the top menu, select MODE MENU TCAMERA T MULTI METERING T ON.Press . Press again to cancel themenu.
(macro/spot)button Shutter button
Mode dial setting
(AE lock) buttonbutton
87
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
4 Point the AF target mark where youwant to meter the exposure. Press the
button. The subject’s brightnesscan be metered at up to 8 differentpoints.● A metering bar appears on the monitor.● Brightness meter readings are ignored
after the 9th reading.● To cancel the locked multi-metering
exposure, hold down over 1second to display . Press itagain and release it quickly.
5 Press the shutter button to take apicture.
MEMO
Example : When metering 2 points (pressing twice)
The average values for the aperture and shutter speed as calculated bymetering 2 points. These values are recalculated every time another meteringpoint is added.
indicates theaverage for the 2metering points.The average isalways shown atthe center of thebar.
� indicates how muchthe present exposureyou are meter ing isdifferent from theaverage exposure value.The present exposurecan be fixed by pressingthe shutter buttonhalfway down. (Thepresent exposure is notadded to the averagevalue unless you press
.)
When � moves more than ±3 far from the center of the bar(the average reading), Éí appears in red.
The reading with pressed.�indicates the number of times you havepressed the button. � indicates thedifference between the metered andaverage readings.
AEL
88
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
● If any of the following buttons are pressed during multi-metering, multi-metering exposure is canceled.The mode dial, (flash mode) button, (macro/spot) button, button.
● If multi-metering is not engagedT In the Digital ESP mode, multi-metering is not available. Set the
metering mode to spot metering ( ) or spot metering + macro mode( ).
● How to save the locked multi-metering exposure after shooting (AEmemory)TAfter pressing as many times as required in step 4, hold it
down for more than 1 second. appears on the screen.When appears, the locked exposure is memorized.MEMO
MEMO
TIPS
Note
� : Available, – : Not available
* Not available when the mode is based on the M mode.
Modes & Multi-metering
*A/S/M
PA S M
� � � � – �
89
Chapte
r 5
AE lock — Locking the exposure
Suitable for situations when optimal exposure is difficult to achieve (such asexcessive contrast between the subject and the surroundings). For example,taking a picture with the bright sky takes up most of the frame may causeunderexposure of the subject in the foreground. In such a case, compose ashot without the bright sky, then press to lock the metered value(exposure) temporarily. Then compose your shot again with the bright sky inthe frame and shoot. In other words, use AE lock when you want an exposuresetting that is different from the setting that would normally apply to the imageyou want to shoot.
1 ∑ When using the camera in the A/S/Mmode, AE lock is not available in the Mmode. Set to any mode except M (P. 52).● Set MULTI-METERING to OFF (P. 86). If
set to ON, AE lock is not available.● If a function other than AE lock is
assigned to the button, assignAE lock to the button (P. 157).
Mode dial setting
(AE lock) button
Shutter button
90
Chapte
r 5
AE lock — Locking the exposure (Cont.)
2 Compose the picture where you wantto lock the metered value (exposure),then press .● To cancel AE lock, press again
and release it quickly. If you want to locka different exposure again, re-composethe picture and press . Each timeyou press , lock and cancel arerepeated.
3 Place the subject you want to focus onwithin the AF target mark, then pressthe shutter button halfway.● The green lamp lights up.● AE lock cannot be canceled while the
shutter button is pressed halfway.
4 Press the Shutter button all the way.● After shooting, AE lock is canceled and
disappears.AEL
AEL
AEL
During AE lock, is displayed.AEL
Green lamp
91
Chapte
r 5
AE lock — Locking the exposure (Cont.)
● How to take pictures at the locked Multi-metering exposure (AE memory)TAfter step 2 or 3, hold down for more than 1 second.
appears. When appears, the locked exposure is memorized. Tocancel AE memory, press and release it quickly.
● AE lock is not availableTA menu is on the screen. Quit the menu (P. 43).TThe multi-metering is ON. Set it to OFF (P. 86).
● AE lock has been canceledTYou turned the mode dial to change the camera’s mode.TThe camera's power was turned off or the camera entered sleep
mode.TThe spot metering/macro mode, drive mode or flash mode was
changed.TYou pressed to display the menu.
MEMOMEMO
� : Available, – : Not available
* Not available when the mode is based on the M mode.
Modes & AE lock
TIPS
*A/S/M
PA S M
� � � � – �
92
Chapte
r 5
Macro mode shooting — Taking close-up pictures
The macro mode allows you to shoot close to thesubject (within 10 cm – 60 cm (0.3 ft – 2 ft)). Whenthe zoom lever is pressed to the maximum Wposition, you can fill the entire frame with yoursubject.Focusing is usually slow when you get close to asubject. However, in the (macro) mode focusingis performed quickly.If the center of the frame (within the AF targetmark) is metered when you are close to the subjectand you shoot with the optimal exposure, thepicture will turn out well (Spot metering+ Macromode) (P. 85).
Mode dial setting
1 Press repeatedly until (macromode) or (spot metering+macromode) appears.● The indications change as follows (if all
modes are available):
● If is not pressed within 2 secondsafter the selection screen is displayed,the selection screen disappears.
Normal shooting
Macro mode shooting
OFF(Digital ESP)
When selecting
Macro mark
(macro/spot) button
Shutter button
93
Chapte
r 5
Macro mode shooting — Taking close-up pictures (Cont.)
Macro mode working rangeWide-angle : 10 cm to 60 cm (0.3 ft to 2 ft)Telephoto : 1.2 m to 2.0 m (4 ft to 6.6 ft)
Factory default setting: Digital ESP
2 Press the shutter button to take a picture.
● In the macro mode, shooting a subject within the normal working range isavailable as well. In such a case, it may take time to focus on that subject.
Note
94
Chapte
r 5
Super macro mode shooting — Taking super close-up pictures
The super macro mode allows you to get as close as 4 cm (1.6 inches) to asubject, and the result will be a picture magnified more than regular macromode. A subject of approximately 44 x 33 mm (1.7 x 1.3 inches) can fully fillthe frame.
In the top menu, select MODE MENU TCAMERA T T ON. Press . Press again to cancel the menu.
Factory default setting: OFF
Mode dial setting
● While the super macro mode is selected, zooming is not available.● In the super macro mode, the camera covers the full focusing range,
however focusing may be slow.
Note
button
95
Chapte
r 5
1 Press / repeatedly until appears.● If / is not pressed within 2
seconds after the selection screen isdisplayed, the selection screendisappears.
2 Press the shutter button fully to startself-timer shooting.● The self-t imer lamp l ights up for
approximately 10 seconds, then startsblinking. After blinking for approximately2 seconds, the picture is taken. (In the
mode, recording starts.)● Approximately 12 seconds after you
press the shutter button, movierecording starts. To stop shooting whilein the mode, press the shutter buttonfully again.
● To stop the self-timer, press / .The self-timer stops and the self-timerlamp will turn off.
Self-timer shooting
This function is useful for taking pictures where you want to be included in thephotograph. Use a tripod to stabilize the camera.
Mode dial setting
Self-timer/Remotecontrol lamp
Shutter button
/ (Self-timer/Remotecontrol) button
96
Chapte
r 5
Self-Timer Shooting (Cont.)
● The self-timer is canceled automatically when shooting is finished.● In the mode, the camera automatically stops recording when it reaches
the maximum recording time.● If you use the self-timer for sequential shooting, the camera shoots 5
frames automatically.
Note
97
Chapte
r 5
Remote control
3m3m15°15°
5m
1 Press / repeatedly until appears.
2 Point the remote control at the remotecontrol receiver on the camera and pressthe shutter button on the remote control.● The camera’s self-timer/remote control
lamp blinks for about 2 seconds beforetaking the picture.
Factory default setting: OFF
Mode dial setting
Shooting is possible using the remote control (optional). This is useful whenyou want to take a picture with yourself in it. If you want to release the shutterwithout touching the camera (when shooting pictures in the evening or atnight, etc.), you can use the remote control instead of the camera’s shutterbutton to avoid camera movement. Use a tripod to stabilize the camera.
Transmitted remotecontrol signaleffective area
Remote control receiver
Shutter button
T buttonW button
Self-timer/Remote control lamp
Lens side
/ (Self-timer/Remote control)button
98
Chapte
r 5
Remote control (Cont.)
● If the camera’s self-timer/remote control lamp does not blink afterpressing the shutter button on the remote control.TThe remote control may be too far away from the camera. Move within
the remote control’s effective range and press the shutter button on theremote control again.
TThere may be signal interference. Change the signal as described inthe remote control’s instructions.
● How to cancel the remote control mode.TThe remote control mode is not canceled automatically after shooting.
Perform step 2 on page 97: Set / to OFF.● You can utilize the camera as a presentation tool with a TV by using
the remote control to operate the following playback features.TThe slide-show, close-up, and index playback features are available.
TIPS
● If the remote control receiver is exposed to strong light, such as directsunlight, the effective signal distance may be reduced or shooting may nottake place.
● To shoot sequential shots using the remote control, press and hold theshutter button on the remote control. If the camera does not receive theremote control signal properly, sequential shooting may stop.
● Read the remote control’s instructions for information on playback with theremote control.
Note
99
Chapte
r 5
: Shoots 1 frame at a time when the shutter button is pressed all theway. (Single-frame shooting; normal shooting)
: Shoots a maximum of 11 sequential pictures at a maximum speedof approximately 1.2 frames/second. Focus, exposure and whitebalance are set and locked with the first frame (Sequentialshooting)
: Shoots a maximum of 3 sequential pictures at a maximum speedof approximately 2.4 frames/second. Focus, exposure and whitebalance are set and locked with the first frame. (High-speedsequential shooting)
: Shoots pictures sequentially. Focus is locked for each frameautomatically. The AF sequential shooting speed is lower thannormal sequential shooting. (AF Sequential shooting)
BKT : Auto bracketing (P. 100)
Sequential shooting
There are 4 sequential shooting modes: sequential shooting ( ), high-speed sequential shooting ( ), AF sequential shooting ( ) and autobracketing (BKT). Sequential shooting modes can be selected from theDRIVE mode menu.
Sequential shooting, high-speed sequential shootting& AF sequential shooting
Mode dial setting
1 In the top menu, select MODE MENU TCAMERA T DRIVE T , or
.Press . Press again to cancelthe menu.
2 Press the shutter button to takepictures.● Press the shutter button all the way and
keep it pressed. The camera will takepictures in sequence until you releasethe button.
Drive mode
button
Shutter button
100
Chapte
r 5
Sequential shooting (Cont.)
Under some conditions, you may obtain better results shooting with exposurecompensation than by using the exposure setting considered optimal by thecamera. When auto bracketing is set, exposure is changed automatically foreach frame when you start shooting. The exposure differential can beselected in the menus. Focus and white balance are locked at the first frame.
Example: When BKT is set to ±1.0, x3
Auto bracketing — Shooting pictures sequentiallywith a different exposure for each frame
Mode dial setting
1 In the top menu, select MODE MENUT CAMERA T DRIVE T BKT. Pressí.
● Read the “Note” (P. 102) and “Modes & Drive mode” (P. 101).● While the high-speed sequential shooting ( ) is selected, it may take
some time to store the pictures. The blinking of the card access lampindicates that the camera is storing images to the card. Wait until the cardaccess lamp turns off before you operate the camera.
● You cannot shoot a picture while all of the segments of the memory gaugeare lit.
Note
Arrow pad
button
Shutter button
101
Chapte
r 5
Sequential shooting (Cont.)
2 Press Ññ to select the exposuredifferential between each frame (±0.3,±0.7, ±1.0), then press í.
3 Press Ññ to select the number offrames to shoot (x3, x5), then press .● In some combinations of picture size
and record mode, only x3 is available.
4 Press the shutter button to takepictures.● Press the shutter button all the way and
keep it pressed to shoot the presetnumber of pictures. You can stopshooting at any time by releasing theshutter button.
BKT
SELECT GO
0.70.3 x3
x51.0
Modes & Drive mode
� : Available, – : Not available, : Factory default setting
* The available settings differ depending on which shooting mode is selected.
Mode
Drive mode
BKT
*A/S/M
PA S M
� � � � �
� � � � �
� � � � �
� � � � �
– � � � – �
BKTx3x5
0.3
1.00.7
CANCEL SELECT GO
102
Chapte
r 5
Sequential shooting (Cont.)
● In the following situations, sequential shooting ( , , , BKT) isnot available:– When the record mode is set to TIFF (P. 112) or when the SHQ record
mode is set to ENLARGE SIZE (P. 116).– When NOISE REDUCTION is set to ON (P. 126).
● If there is not enough space available on the card for the number of framesyou have set during auto bracketing, you cannot continue shooting.
● If the ISO is set to over 200, noise may appear under some shootingconditions (P. 117).
● If the battery power is low and the battery check blinks during sequentialshooting, shooting stops and the camera starts saving the pictures youhave taken. Whether or not all of the shots are saved depends on howmuch battery power remains.
● Since the shutter speed is set to 1/30 sec. max., exposure is decreasedwhen shooting a dark subject to prevent camera movement.
● To use the external flash during sequential shooting, set the external flashso that it fires for each frame.
● If a flash is used, sequential shooting ( , ) will be slowed downbecause it takes time to charge the flash.
● The internal flash is not available for sequential shooting ( , ) whenusing the Self-timer/Remote control function.
● During high-speed sequential shooting, the main flash doesn't fire even ifit's open.
Note
103
Chapte
r 5
Recording sound with still pictures
Sound can be recorded when taking still pictures. Recording starts about 0.5seconds after the shutter is released. Total possible recording time per shot isapproximately 4 seconds. When this function is on, sound is recorded everytime you take a picture.
Mode dial setting
1 In the top menu, select MODE MENUT CAMERA T T ON. Press .Press again to cancel the menu.
2 Press the shutter button to take apicture.
3 Point the microphone on the cameratoward the sound source.● The display showing the recording
progress appears.
Factory default setting: OFF
Microphone
button
Shutter button
● If the camera is more than 1 m (3.3ft) away from the subject, sound cannotbe recorded clearly.
● It is not possible to take another picture during sound recording.● Sound recording is not possible if:
– the TIFF record mode is on. (However, sound can be added later to apicture recorded in TIFF.) (P. 147)
– the drive mode is set to sequential shooting ( , , , BKT).● Sound recording may also pick up camera noises (e.g. buttons clicking,
shutter movement, etc.).● Also read “TIPS” on the next page.
Note
104
Chapte
r 5
Recording sound with movies
● Sounds made by focusing may be recorded while shooting.● During movie recording, you can only use the digital zoom. If is set to
OFF, you can use both the optical zoom and digital zoom during movierecording. (P. 76)
Note
Sound can be recorded while shooting a movie. When is ON, optical zoomduring shooting is not available.
Mode dial setting
1 In the top menu, select T ON, thenpress .
2 Press the shutter button to startrecording.
Factory default setting: OFF
● During playback, sound is output from the speaker.● Sound can be added later to still pictures (P. 147).
Recorded sound can also be changed.
TIPS
Speaker
button
Shutter button
Microphone
105
Chapte
r 5
1 In the top menu, select MODE MENUT CAMERA T PANORAMA.
2 Press í.● The PANORAMA mode is set.
3 Press the arrow pad to choose atwhich edge (top/bottom/right/left) youwant to connect images.● The direction is displayed.
Panorama shooting
You can take advantage of panorama shooting with both Olympus CAMEDIA-brand cards and CAMEDIA Master software. (Non-Olympus cards do notsupport this feature.)Panorama shooting lets you connect images with overlapping edges into asingle panoramic image, using the provided CAMEDIA Master software.
Connects a series of picturesfrom left to right.
Connects a series of picturesfrom bottom to top.
Mode dial setting
Arrow pad
button
Shutter button
106
Chapte
r 5
Panorama shooting (Cont.)
4 Make sure that the edges of images overlap, then take your pictures.● Focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.● You cannot adjust the zoom after the first picture.● Panorama shooting is possible for up to 10 pictures.
Shutterbutton
When shooting, be sure to have the edges (right/left/top/bottom) of imagesoverlap, so you will know which pictures should be connected.
Shutterbutton
5 Press to finish panorama shooting.● Frames on the edges of the screen disappear, and the camera returns
to the normal shooting mode.
� : Available, – : Not available
* Availability of the Panorama shooting depends on which shooting mode is selected.
Modes & Panorama shooting
* P
� � �
107
Chapte
r 5
Panorama shooting (Cont.)
● During panorama shooting, the flash does not fire.● If you take 10 pictures, a warning screen
appears and no more pictures can betaken.
● The panorama mode is only available with OLYMPUS CAMEDIA-brandcards.
● The camera itself cannot connect panorama pictures. To connect eachpicture, use the CAMEDIA Master software.
● Your computer may not have enough memory to perform panoramastitching if you take too many panorama pictures in the HQ/SHQ modes.
● Images are saved in JPEG format when panorama shooting is done in theTIFF mode. The size of the image does not change.
● If the mode dial is moved during panorama shooting, the camera cancelsthe panorama mode and returns to normal shooting.
Note
108
Chapte
r 5
Taking two-in-one pictures
1’st
2’nd
Allows you to combine two pictures taken insuccession and store them as a singlepicture.
Mode dial setting
1 In the top menu, select MODE MENUT CAMERA T 2 IN 1.
2 Press í.● The two-in-one picture mode is set.
3 Press the shutter button to take thefirst shot.● The subject will be on the left in the
combined image.
4 Press the shutter button to take thesecond shot in succession.● The subject will be on the right in the
combined image.
button
Shutter buttoní button
109
Chapte
r 5
Taking two-in-one pictures (Cont.)
● When the recording mode is set to TIFF, the resolution of the second shootwill be the same as the first one.
Note
● How to cancel the two-in-one picture modeTTo cancel the two-in-one picture mode after taking the first shot, press
. The first shot will not be stored.
TIPS
110
Chapte
r 5
FUNCTION — Taking black & white orsepia-toned pictures
Lets you add special effects to your pictures during shooting. Four effects areavailable.BLACK&WHITE : Takes pictures in black and white.SEPIA : Gives pictures a sepia tone.WHITE BOARD : Pictures are in black and white, with black letters on white
backgrounds emphasized to make them easier to read.BLACK BOARD : Same as WHITE BOARD, but for white letters on black
backgrounds. Reverses blacks and whites in the image.
In the top menu, select MODE MENU TCAMERA T FUNCTION T Select a mode.Press . Press again to cancel themenu.
Modes & Function shooting
� : Available, – : Not available, : Factory default setting
* The available settings differ depending on which shooting mode is selected.
Mode dial setting
button
Mode
Funcion shooting
OFF
BLACK & WHITE
SEPIA
WHITE BOARD
BLACK BOARD
* A/S/MP
A S M
� � � �
� � � �
� � � �
� � � �
� � � �
�
�
�
–
–
111
Chapte
r 5
FUNCTION — Taking black & white or sepia-toned pictures (Cont.)
● If letters do not show clearly with WHITE BOARD or BLACK BOARDTUse exposure compensation (P. 119).
TIPS
● When WHITE/BLACK BOARD is selected, the flash does not fine.● WB (white balance), (white balance compensation) and SATURATION
cannot be used in Function shooting.
Note
112
Chapte
r 6
Chapte
r 6
Ad
just
ing
im
ag
e q
ua
lity
an
d e
xp
osu
reRecord mode
Choose the best record mode for your purposes (printing, editing on acomputer, web-site editing, etc.). To see how large SmartMedia memorycapacity is under various conditions (such as different resolutions,compressions, or file formats), refer to the table on page 113. The numbers inthe table are approximate.
Recordmode
TIFF
SHQ
HQ
SQ1SQ2
File size
Larger
Smaller
Description
The highest-quality mode. Images are saved asuncompressed data, which is the best forprinting or image-processing on a computer. Thismode has different resolutions to choose from,depending on how it is used. Selecting
lets you print the entire image without losingits borders— almost the same image size usedby photo labs.
A high quality mode using the JPEG format.Because the compression rate is very low, highquality images can be stored. Selecting letsyou print the entire image without losing itsborders— almost the same image size used byphoto labs. The Enlarge Size function is usefulwhen printing on large-format paper such asA3/11 x 17 inches.
A high quality mode using the JPEG format, withmedium compression. Because the compressionrate is higher than SHQ, file sizes are smaller, somore images can be saved to a card. Like SHQ,resolution can be increased by using or theEnlarge Size function.
The most compressed modes. For each one,you can also choose HIGH (to reduce noise) orNORMAL (to save more images). Select the bestsettings for your purpose (printing, Internetpages, etc.).
3:2
3:2
3:2
Quality
More clear
Normal
113
Chapte
r 6
Record mode (Cont.)
Movie Record ModesMemory capacity of a blank card in seconds per movieThe card memory capacity listed in the table is approximate.
ResolutionRecord mode
HQ
SQ
320x240 (15 frames/sec.)
160x120 (15 frames/sec.)
32 MB
96/93
424/374
16 MB
48/46
211/186
Movie recording time(without sound/with sound)
Memory capacity in # of shots Record
Resolution Compression File format (without sound/with sound)mode
16MB 32MB
2048x1536 1/0 3/0
2048x1360 1/0 3/0
TIFF1600x1200 2/0 5/0
1280x960Uncompressed TIFF
4/0 8/0
1024x768 6/0 13/0
640x480 16/0 33/0
2048x1536 8/8 17/17
SHQ2048x1360 Low 8/8 17/17
ENLARGE SIZEcompression
2/2 5/53200x2400
2048x1536 20/19 40/39
HQ2048x1360
Normal22/21 45/43
ENLARGE SIZE 8/8 17/163200x2400
JPEG
1600x1200HIGH 11/11 22/22
SQ1NORMAL 32/30 64/60
1280x960HIGH 17/16 34/33
NORMAL 49/45 99/90
1024x768HIGH 26/25 53/51
SQ2NORMAL 76/66 153/132
640x480HIGH 66/58 132/117
NORMAL 165/124 331/248
3:2
3:2
3:2
*
Still Picture Record ModesThe memory capacity listed here is approximate.
*HIGH uses low compression/NORMAL uses normal compression
114
Chapte
r 6
Record mode (Cont.)
Mode dial setting
Mode dial setting
1 In the top menu, select MODE MENUT PICTURE T , then press í.● When is displayed on the top menu,
press Ñ, É or ñ according to the arrowshown next to . This allows you to set
directly instead of via MODE MENU.
2 Press Ññ to select the desired recordmode (refer to the table on theprevious page), then press í.
3 Press Ññ to select the resolution(refer to the table on the previouspage).● When you have selected SQ1/SQ2: After
selecting the resolution, press í. PressÑñ to HIGH or NORMAL.
4 Press to save the setting.
Factory default setting: HQ
In the top menu, select T HQ or SQ,then press .
Factory default setting: HQ
Arrow pad
button
Selecting a recording mode for still pictures
Selecting a recording mode for movies
115
Chapte
r 6
Record mode (Cont.)
● Resolution:The number of pixels (vertical x horizontal) used when saving an image. Ifthe image will be printed, higher resolutions (larger numbers) arerecommended so that the image will be clearer. However, higherresolutions make the file size (amount of data) larger, so less picturescan be saved to a card.
● Resolution and picture size on a computer screen:When a picture is transferred to a computer, the size of the picture on thecomputer screen varies depending on the computer's monitor setting.For instance, a picture taken in 640x480 resolution is the same size asthe screen if you set the picture to 1x when the monitor setting is640x480. However, if the monitor setting is over 640x480 (such as1024x768), the picture only takes up part of the screen.
● Compression rate:In record modes other than TIFF, image data is compressed. The higherthe compression rate, the less clear the image will be.
● File format (P. 113):This camera saves images with either TIFF or JPEG formats. In recordmodes other than TIFF, images are compressed in the JPEG format. Thecompression rate also varies in each mode (movies: Motion JPEG (mov)format).
TIPS
● The number of storable pictures differs depending on the record mode, thecard’s memory size and whether or not print reserve is applied for the card.
● The number of storable pictures may not be reduced every time a picture istaken, or increased when a picture is erased. The amount of data variesdepending on the subject of the image.
● If you set VIDEO OUTPUT to PAL and record movies with the AV cableconnected, the maximum recording time may be different from the table onpage 113.
Note
116
Chapte
r 6
Record mode (Cont.)
When ENLARGE SIZE is selected (only available in HQ or SHQ), the 3million pixels used by this camera can be increased as if they wereapproximately 8 (3200 x 2400) million pixels. This allows you to make qualityprints in larger sizes, such as A3/11 x 17 inches. However, file sizes alsobecome larger. ENLARGE SIZE is not available in the
(movie) mode.
● If the SHQ record mode is set to ENLARGE SIZE, sequential shooting ( ,, , BKT) is not possible.
Note
ENLARGE SIZE
The image aspect ratio is normally 4:3. If theaspect ratio is changed to 3:2, the image canbe printed without losing the image borders ata photo lab. When is activated, resolutionis 2048 x 1360 pixels. In the TIFF, SHQ orHQ mode, you can select . In the (movie) mode, is not available.3:2
3:2
3:2
Resolution 3:2
When is selected3:2
1/800P F2.8
117
Chapte
r 6
ISO sensitivity
The higher the ISO value, the greater the camera’s light sensitivity and thebetter its ability to shoot in low-light conditions. However, higher values alsointroduce electrical noise into the resulting image, which may make give theimage a grainy appearance.
In the top menu, select MODE MENU TCAMERA T ISO. Select the most suitableISO from 100, 200, or 400. Press . Press
again to cancel the menu.
AUTO:Sensit ivity is automatically adjustedaccording to the lighting conditions and thesubject brightness.100/200/400:100 is best when you want to shoot clear,sharp images in daylight. With a higher ISOsetting, you can use faster shutter speedswith the same amount of light.
Mode dial setting
ISOWhen ISO is set to AUTO, thisdoes not appear.
Modes & ISO Sensitivity
�: Available, – : Not available, : Factory default setting
* The factory default setting and the available settings differ depending on which shootingmode is selected.
button
Mode
ISO
AUTO
100
200
400
*A/S/M
PA S M
� �� – �
� � � �
� � � �
� � � �
�
�
�
118
Chapte
r 6
ISO sensitivity (Cont.)
● Higher ISO settings can produce more electrical noise.● ISO is standardized based on the sensitivity of normal camera film. The
scale is approximate.● When ISO is set to AUTO and you shoot in dark conditions without a flash,
ISO automatically increases; otherwise the shutter speed will be reduced,possibly resulting in blurred images due to camera movement.
● If a subject is too far away for the flash illumination to reach it when the ISOis set to AUTO, the ISO is automatically increased.
● When using slow synchronization in the P, A or S mode, the slowestavailable shutter speed varies depending on the ISO setting.
Note
119
Chapte
r 6
Exposure compensation
This function allows you to make fine changes to the present exposuresetting. In some situations, you may get better results when the exposure thatthe camera sets is compensated (adjusted) manually. You can adjust between±2.0 in 1/3 steps. When the setting is changed, you can check the result onthe monitor.
1/800 –2.0P F4.5 1/50 +2.0P F4.51/200 0.0P F4.5
í Adjusts towards + (images become brighter)
É Adjusts towards – (images become darker)
– 2.0 + 2.00.0(Factory default setting)
● Often, bright subjects (such as snow) turn out darker than their naturalcolors. Adjusting towards “+” makes these subjects closer to their realshades. Adjust towards “–” when shooting dark subjects to reproducetheir natural colors.
TIPS
Mode dial setting
Éí buttons
�: Available, – : Not available
* The factory default setting and the available settings differ depending on which shootingmode is selected.
Modes & Exposure Compensation
*A/S/M
PA S M
� �� � – �
120
Chapte
r 6
White balance
Color reproduction differs depending on the lighting conditions. For instance,when daylight, the setting sun, or indoor lighting are reflected on white paper,the shade of white produced will be slightly different for each. By setting theWB (white balance), you can achieve more natural-looking color.
Automatically adjusts the white balance for any light source.
Select a preset white balance settingaccording to the type of the light. Press Ññ
to select either of the following settings andpress . Press again to cancel themenu.
: For shooting on a sunny day.: For shooting on a cloudy day.: For shooting under tungsten light.: For shooting under fluorescent light. (The following 3 settings are
available depending on the type of fluorescent light. :daylight (6700K),:natural white (5000K), : white (4200K))
● You can also preview different color tones by trying the different PRESETWB settings under the actual light source, and checking the result on themonitor.
In the top menu, select MODE MENU TPICTURE T WB, then select the best WB(AUTO, PRESET, ) for your shootingconditions.AUTO: Press . Press again to
cancel the menu.PRESET: Press í. Go to “PRESET (preset
white balance)” (see below).: Press í. Go to “ (One-Touch
white balance)” (P. 121).
AUTO (auto white balance)
PRESET (preset white balance)
Mode dial setting
PRESET WB
CANCEL SELECT GO
Arrow pad
button
PRESET WB screen
121
Chapte
r 6
White balance (Cont.)
(One-Touch white balance)
White balanceWhen white balance is set toAUTO, this does not appear.
This function is useful when you need more precise white balance thanPRESET WB can give. To set the proper white balance for the shootingconditions, point the camera at a white object under the light source you wantto use and adjust the white balance.
1 Select as shown on the previouspage.● The ONE TOUCH WB screen
appears.
2 Point the camera at a sheet of whitepaper.● Position the paper so that it fills the screen
entirely. Be sure there is no shadow orbackground showing around the paper.
3 Press to store the new whitebalance setting.● To cancel ONE TOUCH WB, pressÉ.
4 Press repeatedly until the menudisappears.
Factory default setting: AUTO
ONE TOUCH WB screen
ONE TOUCH WB
CANCELCANCEL
122
Chapte
r 6
White balance (Cont.)
BLUE
RED
CANCEL ADJUST GO
1 In the top menu, select MODE MENUT PICTURE T . Press í.● The white balance adjustment indicator
appears on the screen.
2 The color becomes bluer each timeyou press Ñ, and redder each timeyou press ñ, depending on theoriginal white balance conditions.Press to save your adjustment.● White balance can be adjusted between
+7 and –7.
Factory default setting: ±0
● Set white balance to AUTO for normal shooting.● When setting the white balance by pointing the camera at white paper, the
setting may be incorrect if the light reflected by the paper is too bright ordark.
● White balance may not be effective under some special light sources.● After setting the white balance, playback the image and check the color on
the monitor.
Note
White Balance Adjustment
This function allows you to make fine changes to the white balance.
screen
White balance adjustmentindicator
Mode dial setting
Ññí buttons
button
123
Chapte
r 6
Sharpness
1 In the top menu, select MODE MENUT PICTURE T SHARPNESS. Press í.
2 To increase sharpness (+):Press Ñ. Image contours areemphasized, making the image appearsharper. This is ideal for printing.To reduce sharpness (–):Press ñ. Image contours are softened.This is suitable for image editing on yourPC.● Sharpness can be adjusted between +5
and -5 using Ññ.● When you are f inished setting the
sharpness, press . Press againto cancel the menu.
Factory default setting: ±0
Note
This function adjusts the sharpness of images.
● When adjusted too much towards +, noise may appear.
Mode dial setting
Ññí buttons
button
124
Chapte
r 6
Contrast
This function adjusts the contrast of images.For example, images with strong differences in light and shadow can becomemilder, while those with weaker differences can become more vivid.
1 In the top menu, select MODE MENUT PICTURE T CONTRAST. Press í.
2 To increase contrast (+):Press Ñ. Light and dark areas aredefined more clearly. This makes imageslook crisper.To reduce contrast (–):Press ñ. Images become softer. This issuitable for image editing on your PC.● Contrast can be adjusted between +5
and -5 using Ññ.● When you are f inished setting the
contrast, press . Press again tocancel the menu.
Factory default setting: ±0
Mode dial setting
Ññí buttons
button
125
Chapte
r 6
Saturation
1 In the top menu, select MODE MENUT PICTURE T SATURATION. Pressí.
2 To increase saturation (+):Press Ñ. Colors become darker andmore intense.To reduce saturation (–):Press ñ. Colors become lighter.● Saturation can be adjusted between +5
and -5 using Ññ.● When you are f inished setting the
saturation, press . Press again tocancel the menu.
Factory default setting: ±0
This function adjusts the color depth level.
Mode dial setting
Ññí buttons
button
126
Chapte
r 6
Noise reduction
This function reduces the noise that appears on images during longexposures. When shooting night scenes, shutter speeds become slower andnoise tends to appear on images. When noise reduction is set to ON, thecamera automatically reduces noise to produce clearer images. However,shooting time is approximately twice as long as usual.Noise reduction can only be used when the shutter speed is set slower than 1second.
Shooting night scenesShooting normal scenes
In the top menu, select MODE MENU TCAMERA T NOISE REDUCTION T ON.Press . Press again to cancel themenu.
Factory default setting: OFF
● Noise reduction is always ON in the mode.● When you set noise reduction to ON, shooting time is approximately twice
as long as usual, because the camera needs extra time to finish the noise-reduction process. During this time, shooting the next picture is not possible.
● When NOISE REDUCTION is ON, sequential shooting ( , , ,BKT) is not possible.
● This function may not work well with some shooting conditions or subjects.● Since the shutter speed is slower when noise reduction is ON, we
recommend that you use a tripod to prevent camera movement.
Note
Mode dial setting
button
127
Chapte
r 7
Chapte
r 7
Pla
yba
ck
Playing back still pictures
1 Set the mode dial to (playbackmode).● The monitor turns on and displays the last
picture taken.
2 Use the arrow pad to play back otherpictures.● The mark is attached to pictures from
movies (P. 130).● The mark is displayed on the pictures
with sound recorded.
Plays back one picture.
Displays thenext picture
Jumps to the picture 10 frames behind
Displays theprevious picture
Jumps to the picture 10 frames ahead
Single-frame playback
Mode dial setting
Mode dial
Arrow pad
128
Chapte
r 7
Playing back still pictures (Cont.)
1 Press twice quickly (double-click)while in the shooting mode.● The monitor turns on and displays the last
picture taken.● To play back other pictures, use the arrow
pad in the same way as single-frameplayback.
2 To return to shooting, press theshutter button halfway.
This function lets you play back pictures while the camera is in the shootingmode. This is useful when you want to check shooting results quickly. Everypicture and function available in playback mode is also available in QuickView.
Mode dial setting
Quick View
Shutter button
(Quick View)button
129
Chapte
r 7
1 Display a still picture. Then, press to display the top menu.
2 Press Ñ to start the slide-show.
3 Press to stop the slide-show.
Slide-Show
This function displays pictures from the card one after another. When a movieis played back, only the first frame of the movie is displayed almost like a stillpicture.
Playback top menu (still pictures)
MODE MENUINFO
Mode dial setting
● Use of the optional AC adapter is recommended when running a slide-showfor long periods of time. If batteries are being used, the camera will end theslide-show after about 30 minutes and enter sleep mode.
● The slide-show will not stop until you cancel it by pressing .
Note
Ñ button
button
130
Chapte
r 7
Playing back movies — MOVIE PLAY
1 Use the arrow pad to select a picturewith .● The mark is displayed on the pictures
with sound recorded.
2 Press to display the top menu.
This function lets you play back or edit movies.
MODE MENU
MOVIE PLAY
INFO
Playback top menu (movies)
Mode dial setting
20
Arrow pad
button
131
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
3 Press Ñ.● The card access lamp blinks while
movie data is being accessed.● The MOVIE PLAY screen is displayed.
MOVIE PLAYBACK:Plays back movies (P. 132).
INDEX:Displays movies as indexes of 9 stillframes (P. 133).
EDIT:Lets you edit movies (P. 136).
4 Select the item that you need, thenpress .● See the following pages for how to use
each on the MOVIE PLAY screen.
MOVIE PLAY screen
MOVIE PLAY
CANCEL SELECT GO
EDIT
MOVIE PLAYBACK
INDEX
● When playing back a movie, access time will vary depending on the lengthand record mode of the movie.
Note
132
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
1 Follow steps 1-3 on page 130.
2 Press Ññ to select MOVIEPLAYBACK on the MOVIE PLAYscreen.
3 Press to start playback.● When movie playback ends, the display
automatically returns to the beginning ofthe movie.
4 Press .● The MOVIE PLAYBACK screen is
displayed.
5 Press Ññ to select items.
PLAYBACK:Plays back the entire movie.
FRAME BY FRAME:Plays back the movie manually oneframe at a time.
EXIT:To play back other movies or to cancelmovie playback, exit the movie playbackmode.
PLAYBACK
FRAME BY FRAMEFRAME BY FRAME
EXIT
MOVIE PLAMOVIE PLAYBACK
MOVIE PLAYBACK screen
Mode dial setting
Arrow pad
button
Plays back movies.
MOVIE PLAYBACK
133
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
6 Press to start your choice.● When FRAME BY FRAME is selected, follow the instructions below.● When EXIT is selected, the MOVIE PLAY screen appears. To exit, pressÉ.
� Displaying movies using the arrow padÑ: Displays the beginning of the movie.í: Every time you press the button, the next frame appears. The movie can
be displayed continuously by holding the button down.: Displays the MOVIE PLAYBACK screen.
Movies can be displayed as indexes of 9 still frames. You cannot displaylongly recorded movies as indexes. Indexes can be saved on the card as stillpictures. Indexes are not stored in the same record mode as movies (seebelow).
Record mode when Record mode when stored as an indexthe movie is shot
HQ SQ2 (1024x768/HIGH)
SQ SQ2 (640x480/HIGH)
INDEX
134
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
1 Follow steps 1-3 on page 130.
2 Press Ññ to select INDEX on theMOVIE PLAY screen, then press .● The data on the card is sent to the
camera.● The first-frame selection screen appears.● The card access lamp blinks while the
movie is being accessed.● “ CARD FULL” (P. 208) appears and
indexes do not display if there is notenough memory left in the card.
3 Press Éí to select the first frame ofthe index, then press .● After the first frame is selected, the
selection frame moves to the last frameof the index.
� Using the arrow padÑ : Jumps to the first frame of the movie.ñ : Jumps to the last frame of the movie.í : Each press of the button displays the
next frame. Movies can be played byholding the button down.
É : Each press of the button displays theprevious frame. Movies can be played inreverse by holding the button down.
Mode dial setting
Elapsed time / Total time
First-frame selection screen
GO
Arrow pad
button
135
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
4 Select the last frame of the indexusing the arrow pad (See step 3).
5 Press .● INDEX screen appears.
OK:Saves the index on the card. The menudisappears from the screen.
RESET:Resets the index. Returns to the first-frame selection screen.
CANCEL:Cancels the index. Returns to theMOVIE PLAY screen.
6 Press Ññ to select items.
7 Press to run your choice.● When EXIT is selected, the MOVIE
PLAY screen appears. To exit, press É.
Last-frame selection screen
INDEX screen
● INDEX is not available in the following cases;Movies of approximately 32 seconds or longer recorded in HQ mode.Movies of approximately 130 seconds or longer recorded in SQ mode.
● INDEX is not available when the card is protected or when “ CARD FULL”appears (indicating insufficient memory).
Note
GO
O K
CANCEL
RESET
INDEXINDEX
136
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
EDIT
This function allows you to edit movies by erasing parts you do not want. Youcannot edit long recorded movies.
1 Follow steps 1-3 on page 130.
2 Press Ññ to select EDIT on the MOVIEPLAY screen, then press .● The data on the card is sent to the
camera.● The first-frame selection screen appears.● The card access lamp blinks while the
movie is being accessed.● “ CARD FULL” (P. 208) appears if there
is not enough memory left on the card toedit the movie.
3 Press Éí to select the first frame ofthe movie, then press .● After the first frame is selected, the
selection frame moves to the last frameof the movie.
� Using the arrow padÑ: Jumps to the first frame of the movie.ñ: Jumps to the last frame of the movie.í: Each press of the button displays the
next frame. Movies can be played byholding the button down.
É: Each press of the button displays theprevious frame. Movies can be played inreverse by holding the button down.
First-frame selection screen
Mode dial setting
GO
Arrow pad
button
137
Chapte
r 7
Playing back movies — MOVIE PLAY (Cont.)
4 Select the last frame of the movie byusing the arrow pad. (See step 3)
5 Press .● EDIT screen appears.
6 Press Ññ to select items.
OK:Selects NEW FILE or OVERWRITE.
* NEW FILE saves the edited movie as anew movie with a different file name.
* OVERWRITE saves the edited moviewith the original file name. The originalmovie will be erased.
RESET:Resets EDIT. Returns to the first-frameselection screen.
CANCEL:Cancels EDIT. Returns to the MOVIEPLAY screen.
Last-frame selection screen
EDIT screen
GO
O K
CANCEL
RESET
EDIT
NEW FILE
OVERWRITE
EDIT
CANCEL SELECT GO
138
Chapte
r 7
Playing Back Movies — MOVIE PLAY (Cont.)
7 Press to run your choice.● When EXIT is selected, the MOVIE PLAY screen appears. To exit, pressÉ.
● When OK is selected, press Ññ to select NEW FILE or OVERWRITE,then press . The movie is edited.
● EDIT is not available in the following cases;Movies of approximately 32 seconds or longer recorded in HQ mode.Movies of approximately 130 seconds or longer recorded in SQ mode.
● EDIT is not available when the card is protected (SmartMedia) or when “CARD FULL” appears (indicating insufficient memory).
● NEW FILE is not available when the card does not have enough memory.● It is not possible to edit movies that were recorded together with sound on
another camera.
Note
139
Chapte
r 7
Close-up playback
● How to return the picture to the original size (1x)TTurn the zoom lever to W.
● How to display another pictureTTurn the zoom lever to W to return to 1x, then select the desired
picture by using the arrow pad.
TIPS
Pictures displayed on the monitor can be enlarged. Each time you turn thezoom lever towards T, pictures are enlarged 1.5, 2, 3, 3.5 or 4 times.
1 With the arrow pad, select the pictureyou want to enlarge.● Pictures with the mark cannot be
enlarged.
2 Turn the zoom lever toward T ( ).● When a picture is enlarged, ß/å/˙/¥
are displayed. Press the arrowcorresponding to the direction you wantto view. The enlarged picture is shiftedin the desired direction, allowing you toview a different portion of the image.
2.5x
Mode dial setting
● If picture rotation is attempted during close-up playback, close-up playbackis canceled.
● You cannot save the enlarged image.
Note
Zoom leverArrow pad
140
Chapte
r 7
Index display
This function lets you show many pictures at the same time on the monitor. Itis useful for comparing your pictures and choosing the best ones. The numberof pictures shown can be 4, 9, or 16 (see the next page).
In the single-frame playbackmode (P. 127), press thezoom lever to W ( ).
Pictures, including the one displayed inthe single-frame playback mode,appear in the index display.
Index display (9-frame)
� How to use the arrow pad during an index display
É: Moves to the previous frame.í: Moves to the next frame.Ñ : Jumps to the previous index display
(the frames before the top left frame).ñ : Jumps to the next index display (the
frames following the bottom right frame).
141
Chapte
r 7
Index display (Cont.)
● How to view a full-size picture from the indexTSelect the picture with the arrow pad, then press the zoom lever
toward T.
TIPS
This function lets you change the number of pictures in an index display.
1 In the top menu, select MODE MENUT SETUP T .
2 Choose the number of pictures (4, 9 or16) and press .Press again to cancel the menu.
Index display (4-frame)
Selecting the number of pictures
Mode dial setting
Zoom lever
Arrow pad
button
142
Chapte
r 7
Editing still pictures
Allows you to edit still pictures and save them as new ones.: Changes picture dimensions to 640 x 480 or 320 x 240 and saves the
picture as a new file. Use this function to make the image file sizesmaller, for instances such as attaching the picture to e-mail.
: Enlarges a part of a picture and saves it as a new picture.
1 Use the arrow pad to select the stillpicture you want to edit.
2 In the top menu, select MODE MENUT EDIT T select an item.● When selecting ● When selecting : P. 143
Mode dial setting
1 Perform steps 1 and 2 of “Editing stillpictures” above to select .
2 Press í.● The screen appears.
3 Press Ññ to select the file size.
640 x 480/320 x 240:File sizes used when storing pictures asnew ones.
CANCEL:Cancels resizing pictures. To edit otherpictures instead, select this item. Thescreen returns to normal playback.
Mode dial setting
Resizing pictures
screen
EXIT SELECT GO
640 x 480
CANCEL
320 x 240
Arrow pad
button
143
Chapte
r 7
Editing still pictures (Cont.)
4 Press to edit.● A bar is displayed to show editing progress and the screen returns to
normal display.
● In the following cases, is not available:– Movies, or pictures processed on a PC– When the card is protected (SmartMedia) or when “ CARD FULL”
appears (indicating there is no memory left).– If the size of the selected picture is 640 x 480, 640 x 480 is not available.– Pictures recorded in (doing so result in a picture with a black bar
added top and bottom of it).3:2
Note
1 Perform steps 1 and 2 of “Editing stillpictures” on P. 142 to select .
2 Press í. ● The screen appears.
3 Press Ññ to select NEW FILE.
NEW FILE:Enlarges the selected part of a pictureand saves it as a new picture.
CANCEL:Cancels trimming. To edit other picturesinstead, select this item. The normaldisplay is restored.
Mode dial setting
Trimming pictures
screen
CANCEL
NEW FILE
GOEXIT SELECT
Zoom leverArrow pad
button
144
Chapte
r 7
screen
CANCEL
RESET
O K
Editing still pictures (Cont.)
GO
4 Press .● The screen appears.● If there is not enough memory left on
the card, “ CARD FULL” (P. 208)appears.
5 Use the Arrow pad and the Zoom leverto determine the position and extent oftrimming.
6 Press to complete setting.
7 Press Ññ to select an item.
OK:Saves the trimmed image on the cardand returns to normal playback.
RESET:Restores the original image and returnsto step 4 to trim it again.
CANCEL:Cancels the trimming and returns tonormal playback.
8 Press .
Change size
145
Chapte
r 7
Editing still pictures (Cont.)
● is not available when the card is protected (SmartMedia) or when “CARD FULL” appears (indicating insufficient memory).
● If pictures recorded in are trimmed, the image proportions are changedto the standard 4:3 aspect ratio.
● The trimmed picture may appear more grainy than the original one.
3:2
Note
146
Chapte
r 7
Ajusting playback sound volume
You can adjust the volume of the sound output from the speaker duringplayback, as well as the volume of the sound selected in PW ON SETUP andPW OFF SETUP.
1 In the top menu, select MODE MENUT SETUP T VOLUME. Press í.● The sound volume indication appears.
2 Press Ññ to adjust the plalybacksound volume.
Ñ: Turns up the volume.ñ: Turns down the volume.
3 Press .
Mode dial setting
Ññí buttons
button
Speaker
If the volume is set to here, nosound is played back.
SETU
PCA
MCA
RDPI
C
VOLUME
VIDEO OUT
147
Chapte
r 7
Adding sound
You can add sound to still pictures and change sound that has already beenrecorded.You can add approximately 4 seconds of sound to a picture.
1 Select a still picture to add sound to itby using the arrow pad.● Sound cannot be added to pictures with
the mark.
2 In the top menu, select MODE MENUT PLAY T .
3 Press í to display START.
4 Point the camera microphone towardsthe subject, then press to startrecording.● A bar is displayed to show the progress
of recording.
Mode dial setting
Arrow padMicrophone
button
Note● To obtain the optimum sound, the microphone should be placed no further
than 1m (3.3 ft) away from the subject.● When a new sound is recorded, the original sound is erased.● function is not available when the card is protected (SmartMedia) or
when “ CARD FULL” appears (indicating there is no memory left).● Sound may not be recorded when a card has insufficient memory.● Sound recording may also pick up camera noises (e.g. buttons clicking,
shutter movement, etc.).● After recording, sound cannot be erased from pictures. However, you can
replace the sound with silence by doing the above steps again whileremaining quiet.
148
Chapte
r 7
Protect
It is highly recommended that you protect important pictures to avoidaccidentally erasing them. Protected pictures cannot be erased by the single-frame/all-frame erase function.
1 Display the picture you want to protectby using the arrow pad.
2 Press . The picture is nowprotected.● To cancel protection, press again.
Displayed when a pictureis protected.
Mode dial setting
HQ
● Protected pictures cannot be deleted with the ALL ERASE (all-frameerase) function, but they can be deleted with the FORMAT (format)function.
● Protection cannot be applied to pictures stored on a card with a write-protect adhesive seal (SmartMedia).
Note
(protect) button
Arrow pad
149
Chapte
r 7
Erasing pictures
Recorded pictures can be erased. You may use the single-frame erasefunction or the all-frame erase function.
1 Select a picture you wish to erase byusing the arrow pad.● If the picture is protected, cancel the
protection first (P. 148).
2 Press .● The ERASE screen is displayed.
3 Press Ñ to select YES.● To cancel erasing, select NO and press
, or press again.
4 Press to erase the picture.
This function only erases the picture displayed on the monitor. Erasing furtherpictures must be done one-by-one if using this function.
ERASE
YES
N O
SELECT GO
ERASE screen
● It is not possible to erase protected pictures or pictures stored on a cardthat has a write-protect seal (SmartMedia).
● Once erased, pictures cannot be restored.
Note
Mode dial setting
Single-frame erase
Arrow pad
(erase) button
button
150
Chapte
r 7
Erasing pictures (Cont.)
1 In the top menu, select MODE MENUT CARD T CARD SETUP T
ALL ERASE.
2 Press .● The ALL ERASE screen is displayed.
3 Press Ñ to select YES.● To cancel erasing, select NO and press
.
4 Press to start erasing.● A bar is displayed to show the progress.
This function erases all still pictures and movies on the card, except protectedones (P. 148).
ALL ERASE screen
ALL ERASE
YES
N O
SELECT GO
Screen during erasing
Mode dial setting
All-frame erase
Ñ button
button
151
Chapte
r 7
Formatting cards
This function lets you format a card. Formatting prepares cards to receivedata. Olympus CAMEDIA-brand cards are highly recommended for use withthis camera. If you will use non-OLYMPUS cards or cards formatted by otherdevices such as a computer, you must format them with the camera beforeuse.
Mode dial setting
1 In the top menu, select MODE MENUT CARD T CARD SETUP T
FORMAT.
2 Press .● The FORMAT screen is displayed.
3 Press Ñ to select YES.● To cancel formatting, select NO and press
.
4 Press to start formatting.● A bar is displayed to show the progress of
formatting.
FORMAT screen
FORMAT
YES
NO
Screen during formatting
Ñ button
button
152
Chapte
r 7
Formatting cards (Cont.)
● All existing data stored on the card is erased when the card is formatted.Make sure that you save or transfer important data to a PC beforeformatting a used card.
● Recording time may be longer or the recordable time may be shorter withnon-OLYMPUS cards and computer-formatted cards. In such cases, re-formatting with the camera is recommended.
● Cards with a write-protect seal cannot be formatted (SmartMedia).
Note
1 Make sure that the TV and camerapower are off .
2 Connect the camera to the TV usingthe AV cable.
Playback on a TV
Use the provided AV cable to play back recorded images and sounds on yourTV.
Mode dial setting
Connect to the TV’s videoinput (yellow) terminal andsound input (white)terminmal
Connect to the A/V OUT jack.
Mode dial
AV cable
153
Chapte
r 7
Playback on a TV (Cont.)
3 Set the mode dial to . Turn on the camer and the TV. Set the TV tothe video input mode.● For details on switching to video input, refer to your TV's instruction
manual.
4 Select an image by using the arrow pad.● The selected image will be displayed on the TV.
● The optional AC adapter is recommended when using the camerawith a TV.
● Images can also be rotated when they are played back on a TV. Seethe next page for details.
TIPS
● Make sure that the camera’s video output signal type is the same as theTV’s video signal type (P.182).
● The camera’s monitor turns off automatically when the camera is connectedto a TV.
● The image may appear off-center on the TV screen. This is due to the TV’sadjustment settings.
● When images are compressed in order to fit the entire image on a TVscreen, a black frame is placed in the blank parts of the screen around theimage. If the image is output to a video printer via the TV, the black framemay be printed.
Note
154
Chapte
r 7
Playback on a TV (Cont.)Chapte
r 7
The pictures can be played back at an orientationdifferent from the original one.When you takes pictures holding the camerasideways, the tops of their images are oriented toeither side of the monitor. You can turn them 90degrees clockwise or counter-clockwise.
1 Display a verticallyoriented picture inthe single-frameplayback mode (P. 127).
2 Each time ispressed, the pictureis rotated as shown.
Normal playbackof a verticallyoriented picture
Picture rotated90° counter-clockwise fromnormal playbackposition
Picture rotated90° clockwisefrom normalplayback position
Mode dial setting
HQ
’02.12.23 21:56 24
HQ
’02.12.23 21:56 24
HQ
’02.12.23 21:56 24
● New picture orientations are saved even when the power is turned off.● Close-up playback is possible after pictures are rotated. However, pictures
cannot be rotated while in close-up playback.● The following pictures cannot be rotated:
protected pictures, pictures on a card with a write-protect seal(SmartMedia), movies.
● Images taken with other cameras may not be able to be rotated.
Note
Picture rotation
(Picutre rotation) button
155
Chapte
r 8
Chapte
r 8
Use
ful fu
nc
tio
ns
All reset — Saving the camera’s settings
This function lets you choose whether or not the camera saves its currentsettings.
OFF: The settings made just before the power is turned off are saved.ON : All settings are returned to the factory default settings.
The settings affected by All Reset are listed on the next page.The ALL RESET setting (ON/OFF) applies to all the modes. If ALL RESET isset to OFF in one shooting mode, this setting applies to all other shootingmodes, as well as the playback and modes.ALL RESET cannot be set in the mode.When ALL RESET is set to OFF, the OFF setting does not apply to functionsthat are not available in the current mode (For example, : setting FULLTIMEAF, INFO, etc.).All reset does not affect the menu’s SETUP items.
Mode dial setting
In the top menu, select MODE MENU T SETUP T ALL RESET T ON orOFF. Press . Press again to cancel the menu.
Factory default setting: ON
156
Chapte
r 8
All reset — Saving the camera’s settings (Cont.)
Items that All Reset affects
SettingFactory default
setting
DIGITAL ZOOMOFF(P. 77)
FULLTIME AF (P. 67) OFF
AF MODE (P. 66) iESP
(P. 103) OFF
(P. 94) OFF
FUNCTION (P. 110) OFF
INFO (P. 167) OFF
(P. 171) OFF
(for still pictures)HQ(P. 112)
WB (P. 120) AUTO
(P. 122) ±0
SHARPNESS (P. 123) ±0
CONTRAST (P. 124) ±0
SATURATION (P. 125) ±0
SettingFactory default
setting
ZOOM (P. 76) 38mm
AF/MF (P. 69) AF
(P. 85, 92) OFF
F No (P. 58) F2.8
SHUTTER (P. 59) 1/1000
(P. 119) ±0
FLASH MODE (P. 81) AUTO
(P. 95) OFF
LCD* OFF
DRIVE (P. 99)
ISO (P. 117) AUTO/100
A/S/M (P. 52) A
(P. 84) ±0
SLOW (P. 81) SLOW1
NOISE REDUCTION OFF(P. 126)
MULTI METERING OFF(P. 86)
* This will set the monitor to ON or OFF when the camera is turned on.
157
Chapte
r 8
Custom button
Menu items listed in the table below can be set tothe custom button on the camera. This makes iteasy to jump to frequently-used functions bypressing the custom button. The factory defaultsetting is AE LOCK.
Custom button
Available Items Settings
AE LOCK (factory default setting) (P. 89) –
DRIVE (P. 99) , , , , BKT
ISO (P. 117) AUTO, 100, 200, 400
A/S/M (P. 52) A, S, M
SLOW (P. 81) SLOW1, SLOW2, SLOW
NOISE REDUCTION (P. 126) OFF, ON
DIGITAL ZOOM (P. 77) OFF, ON
FULLTIME AF (P. 67) OFF, ON
AF MODE (P. 66) iESP, SPOT
(P. 103) OFF, ON
FUNCTION (P. 110) OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
INFO (P. 167) OFF, ON
(P. 171) OFF, ON
(for still pictures) (P. 112) TIFF, SHQ, HQ, SQ1, SQ2
WB (P. 120) AUTO, , , , , ,
(P. 94) OFF, ON
158
Chapte
r 8
Custom Button (Cont.)
1 In the top menu, select MODE MENUT SETUP T CUSTOM BUTTON. Pressí.● The CUSTOM BUTTON screen appears.
2 Select the function you want by usingÑñ, then press to save yoursetting.
AE LOCKDRIVE
ISOA/M/S
CUSTOM BUTTON
CUSTOM BUTTON screen
Mode dial setting
Setting the custom button
button
Mode dial setting
Using the custom button
1 Press .● The function currently set to the custom
button appears.
(custom) button
Ññí buttons
159
Chapte
r 8
Custom Button (Cont.)
Example: When INFO is set to the custom button.
Press thisbutton.
Press toselect ON or OFF.
INFO ONINFO OFF
● To use AE LOCK after setting a different function to the custombutton:
TAE lock cannot be used when a different function is set to the custombutton. Re-set AE LOCK to the custom button by following “Setting theCustom Button” on page 158.
TIPS
● You cannot set the custom button separately for A/S/M and .
Note
2 Set following the below:
160
Chapte
r 8
Shortcut
You can replace 3 functions, which are offunctions on the top menu other thanMODE MENU, with those listed in the tablebelow. This is useful when you want toquickly go to frequently-used functions.
MODE MENU
DRIVE
WBShortcut menu
Available Menu Items SettingsDRIVE (P. 99) , , , , BKT
ISO (P. 117) AUTO, 100, 200, 400
A/S/M (P. 52) A, S, M
1/2/3/4 (P. 53) , , ,
(P. 84) +2 — �0 — –2
SLOW (P. 81) SLOW1, SLOW, SLOW2
NOISE REDUCTION (P. 126) OFF, ON
MULTI METERING (P. 86) OFF, ON
DIGITAL ZOOM (P. 77) OFF, ON
FULLTIME AF (P. 67) OFF, ON
AF MODE (P. 66) iESP, SPOT
(P. 103) OFF, ON
(P. 94) OFF, ON
PANORAMA (P. 105) –
2 IN 1 (P. 108) –
FUNCTION (P. 110) OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
AF AREA (P. 68) –
INFO (P. 167) OFF, ON
(P. 171) OFF, ON
(still pictures) (P. 112) TIFF, SHQ, HQ, SQ1, SQ2
WB (P. 120) AUTO, PRESET,
(P. 122) BLUE - �0 - RED
SHARPNESS (P. 123) +5 — �0 — –5
CONTRAST (P. 124) +5 — �0 — –5
SATURATION (P. 125) +5 — �0 — –5
4321
161
Chapte
r 8
Shortcut (Cont.)
Mode dial setting
1 In the top menu, select MODE MENUT SETUP T SHORT CUT. Press í.● The SHORT CUT screen appears.● The A, B and C positions on the monitor
are the same as the left and bottom on thetop menu.
2 Select A, then press í to display themenu functions on page 160.
3 Select the item you want by pressingÑñ, then press to save yoursetting.● Repeat Steps 2 and 3 to set B and C.
SHORT CUTA
WB
DRIVEBC
SELECT GO
SHORT CUT screen
Menu items on the top menu
A
B
C
MODE MENU
Assign functions to the A, B and C positionson the top menu.
SHORT CUTABC
SELECT GO
DRIVEISO
A/M/S1/2/3/4
Setting the shortcut menu
Arrow pad
button
162
Chapte
r 8
Shortcut (Cont.)
Mode dial setting
1 Press to display the top menu.● The shortcut menu you set before is
shown on the top menu.
2 Press the arrow pad according to thearrow (˙ߥ) shown next to eachitem.● The monitor jumps directly to the setting
screen of that item.
DIGITAL ZOOM
WB
MODE MENU
Example: When DIGITAL ZOOM is set to the A shortcut.
Press thisbutton.
Pressing Ñ takes you directly to theDIGITAL ZOOM setting screen.
CAME
RAPI
CSE
TCA
RD
DIGITDIGITAL ZOOMAL ZOOM
NOISE REDUCTION
OFFONFULLTIME AF
AF MODE
MULTI METERING
Using the shortcut menu
● The shortcut menu cannot be set separately for A/S/M.
Note
Factory default setting: A DRIVEBC WB
Arrow pad
button
163
Chapte
r 8Your favorite settings can be saved in MY MODE SETUP. When the mode is
set to , your customized settings are activated. When the camera is in theA/S/M, you can also save some of the settings you are using in MY MODESETUP. In MY MODE SETUP, you can create and save up to 4 different MyMode settings. The settings affected by MY MODE SETUP are listed on P. 166.
MY MODE SETUP
1 In the top menu, select MODE MENUT SETUP T MY MODE SETUP. Pressí.
2 Press Ññ to select the item you want.● If you reset , its factory default
setting (P.166) will be erased.
CURRENT : Saves the settings you are using now.
RESET : Restores the factory default settings.
CUSTOM : Saves settings one by one.
1
Mode dial setting
SLEEP
FILE NAME
SHUTTER
MY MODE SETUP
SETU
PCA
MCA
RDPI
C
CURRENTRESET
CUSTOM
Arrow pad
button
164
Chapte
r 8
MY MODE SETUP (Cont.)
3 Press í to display the “MY MODESETUP” screen.Press Ññ to select one from , ,
or , then press to save yourfavorite settings.
, , and correspond tothose on the 1/2/3/4 mode selectionscreen displayed.When selecting CURRENT in step 2:Go to step 4.When selecting RESET in step 2:Go to step 4.When selecting CUSTOM in step 2:Go to step 5.
4 Set CURRENT or RESET on each MYMODE SETUP screen. After selectingthe setting, press . Go to step 8.● To cancel the setting, select CANCEL.
4321
4321
When CURRENT is selected:Select SET.
When RESET is selected:Select ALL RESET.
MY MODE SETUP
SET
CANCEL
SET CURRENT SETTING
ALL RESET
CANCEL
MY MODE SETUPRESET CURRENT SETTING
“MY MODE SETUP” screen
1/2/3/4 mode selection screen
MY MODE SETUP
CANCEL SELECT GO
MY MODEMY MODEMY MODEMY MODE
CANCEL SELECT GO
1/2/3/4MY MODEMY MODEMY MODEMY MODE
165
Chapte
r 8
MY MODE SETUP (Cont.)
Example: When setting the aperture on the CUSTOM screen.
CUSTOM screen
Press í to go to theaperture setting screen.
MY MODE SETUP
SHUTTERFNoFNo
MY MODE SETUP
SHUTTERFNo
OFF
Decreasethe value
Increasethe value
Press to save the setting.The monitor then returns tothe previous screen.
5 Set CUSTOM on the CUSTOM screen.Press Ññ to select the functions you want, then press í.
6 Select the setting within the function by using Ññ, then press .● Repeat Steps 5 and 6 to change other functions.
7 When you have made all the settings you want, press to exit fromthe CUSTOM screen. Custom setting registration is complete.● The menu displayed in step 2 appears.
8 Press to cancel the menu.
● When you save settings in CURRENT, the saved zoom position may differfrom the zoom position you are using. The zoom position is set to one of the5 zoom positions included in ZOOM (function included in CUSTOM). Thevalue closest to the current zoom position will be selected.
Note
166
Chapte
r 8
MY MODE SETUP (Cont.)
Available Items and Factory Default SettingsThe factory default setting is registered in .1
*1 This will set the monitor to ON or OFF when the camera is turned on.*2 In the mode, available zoom positions are 38mm/50mm/100mm/200mm/380mm
(these numbers are based on a 35 mm camera).
SettingFactory default
setting
DIGITAL ZOOM (P. 77) OFF
FULLTIME AF (P. 67) OFF
AF MODE (P. 66) iESP
(P. 103) OFF
(P. 94) OFF
PANORAMA (P. 105) OFF
2 IN 1 (P. 108) OFF
FUNCTION (P. 110) OFF
INFO (P. 167) OFF
(P. 171) OFF
(for still pictures) HQ(P. 112)
WB (P. 120) AUTO
(P. 122) ±0
SHARPNESS (P. 123) ±0
CONTRAST (P. 124) ±0
SATURATION (P. 125) ±0
SettingFactory default
setting
P/A/S/M/S-Prg (P. 54) P
F No (P. 58) F2.8
SHUTTER (P. 59) 1/1000
(P. 119) ±0
LCD*1 OFF
ZOOM*2 (P. 76) 38mm
FLASH MODE (P. 81) AUTO
(P. 85, 92) OFF
/ (P. 95, 97) OFF
DRIVE (P. 99)
AF/MF (P. 69) AF
ISO (P. 117) AUTO
(P. 84) ±0
SLOW (P. 81) SLOW1
NOISE REDUCTION OFF(P. 126)
MULTI METERING OFF(P. 86)
167
Chapte
r 8
Information display
Lets you select the amount of shooting information displayed in the shootingor playback mode. The shooting information is displayed approximately 3seconds, then the monitor returns to the regular display. For details on eachpiece of information displayed, see pages 12 to 15.
When INFO is OFF When INFO is ON
Mode dial setting
, , , , , , , A/S/M, P:
In the top menu, select MODE MENU TSETUP T INFO T ON. Press . Press
again to cancel the menu.
:
Press to display the top menu.Pressing É turns INFO on.
● All shooting information is displayed.● To turn INFO off in the playback mode,
press again to bring up the top menuand press É.
Example: Playback mode
HQ
’02.09.12 12:30 20
HQSIZE: 2048x1536F2.8 1/806 +2.0
ISO100’02.09.12 12:30FILE: 100–0020
Ññ buttons
button
168
Chapte
r 8
Monitor brightness adjustment
Mode dial setting
Adjusts the brightness of the monitor and the viewfinder.
1 In the top menu, select MODE MENUT SETUP T , then press í.
2 Press repeatedly to cycle betweenselecting the monitor and theviewfinder.● Turn on the monitor to adjust the
monitor.● Turn on the viewfinder and turn off the
monitor to adjust the viewfinder.
3 To brighten the monitor, press Ñ. Todarken it, press ñ. To complete thesetting, press .
Factory default setting: ±0
ADJUST GO
Ññ buttons
button
(monitor)button
169
Chapte
r 8
Beep sound adjustment
You can set the volume of the beep used for button operations or warnings toOFF, LOW or HIGH. The factory default setting is 1/HIGH, but you can turnthe beep completely off if you do not want it.
Mode dial setting
1 In the top menu, select MODE MENUT SETUP T , then press í.
2 Press Ññ to select the desiredsetting.OFF: Turns the sound off
T Go to step 4.1 or 2: Selects the tone
To complete the setting T Go to step 4.To adjust the volume T Go to step 3.
3 Press í, then press Ññ to selectHIGH or LOW.
4 Press . Press again to cancel themenu.
Factory default setting: 1/HIGH
Arrow pad
button
HIGHLOW
21
OFF
CANCEL SELECT GO
170
Chapte
r 8
Shutter sound adjustment
You can select the tone and adjust the volume of the tone that sounds eachtime you press the shutter button.
Mode dial setting
1 In the top menu, select MODE MENUT SETUP T SHUTTER, then press í.
2 Press Ññ to select the desiredsetting.OFF: Turns the sound off
T Go to step 4.1 or 2: Selects the tone
To complete the setting T Go to step 4.To adjust the volume T Go to step 3.
3 Press í, then press Ññ to selectHIGH or LOW.
4 Press . Press again to cancel themenu.
Factory default setting: 1/HIGH
Arrow pad
button
HIGHLOW
21
OFF
CANCEL SELECT GO
SHUTTER SOUND
171
Chapte
r 8
Histogram display
You can display a histogram showing the brightness and contrast of thesubject in your monitor during shooting. Checking the histogram enablesprecise exposure control. During playback, you can display a histogramshowing the brightness and contrast of recorded pictures. The histogram'sbrightness and contrast data helps you.
Mode dial setting
, , , , , , , A/S/M, P:
In the top menu, select MODE MENU TCAMERA T T ON. Press . Press again to cancel the menu.
:
Press to display the top menu.Pressing ñ turns on.
Example: When the histogram is displayed duringshooting (P mode)
HQ
ñ button
button
Histogram of the area in theAF target mark (green)
Darker Brighter
The orange frame indicates lows thatwill drop out.
Histogram of the wholeframe (white)
The orange frameindicates highs that willdrop out.
● The histogram displayed during shooting may differ from the histogramdisplayed during playback.
● A histogram may not appear when you play back pictures shot on anothercamera.
● The histogram does not appear when you are shooting in M mode or multi-metering mode, or while pressing the shutter button.
Note
172
Chapte
r 8
Rec View
You can choose if the image being recorded is displayed on the monitorduring shooting.
� ONThe image being recorded is displayed. This is useful for a brief check ofimages you have just taken. Pressing the shutter button halfway at any timedisplays the image the camera is currently aimed at.� OFFThe image being recorded is not displayed. This is useful when you want toprepare your next shot while the previous image is being recorded.
In the top menu, select MODE MENU TSETUP T REC VIEW T ON or OFF. Press
. Press again to cancel the menu .
Factory default setting: ON
Mode dial setting
● If battery power becomes too low, Rec View is not available.Note
button
173
Chapte
r 8
Sleep timer
The camera automatically enters the sleep mode if the time you have set haspassed with no operations being performed. To leave the sleep mode, operateany button (press the shutter button or arrow pad, etc.).
In the top menu, select MODE MENU TSETUP T SLEEP, then select a settingfrom the following: 30SEC, 1MIN, 3MIN,5MIN or 10MIN. Press . Press againto cancel the menu.
Factory default setting: 3 MIN
Mode dial setting
● The sleep mode does not work when using an AC adapter.● The sleep timer can only be changed in the shooting mode. In the playback
mode, the sleep timer is always set at 3 minutes.● During the slide-show mode, when approximately 30 minutes have passed,
the camera automatically enters the sleep mode.● Battery save mode (P.174) is available as another power-saving feature.
Regardless of the sleep timer setting, the viewfinder will turn off if nooperations are performed for 30 seconds.
Note
button
174
Chapte
r 8
Battery save mode
Saves battery power during shooting:● Regardless of the sleep timer setting, the viewfinder will turn off if no
operations are performed for 30 seconds.● The monitor is not available in battery save mode.
In the top menu, select MODE MENU TSETUP T BATTERY SAVE T ON. Press
. Press again to cancel the menu.
Factory default setting: OFF
Mode dial setting
button
175
Chapte
r 8
Power on/off display setting
You can select a picture and/or sound to display/output when the power isturned on/off. It is also possible to register your favorite picture for displaywhen the power is turned on/off (P. 177). To select the already registeredpicture, select “2” in SCREEN. The sound volume is the same level asselected in the VOLUME setting (P. 146).
1 In the top menu, select MODE MENUT SETUP T PW ON/OFF SETUP.Press í.● The PW ON/OFF SETUP screen appears.
2 Press Ññ to select SCREEN orSOUND, then press í.
3 Press Ññ to select OFF, “1” or “2”,then press .● The SCREEN SETUP screen appears
and asks if you are sure you want toregister a picture.
Mode dial setting
Arrow pad
button
PW ON SETUP screen
PW ON SETUP
CANCEL SELECT GO
12
SCREENSOUND
OFF
176
Chapte
r 8
Power on/off display setting (Cont.)
● In the mode, this function’s setting is the same as that selected in theother shooting modes.
● If the battery check indication appears when the power is turned off, the setimage may not appear.
SCREENOFF : No picture1 : Factory default setting2 : Selects the already registered picture. If there is no picture registered,
nothing appears on the monitor.SOUNDOFF : No startup/shutdown soundON : Factory default setting
Note
177
Chapte
r 8
Screen setup
You can register your favorite picture for display when the power is turnedon/off. For more information on this function, refer to “Power on/off displaysetting” (P. 175).
1 Play back a still picture you want toregister.In the top menu, select MODE MENUT SETUP T SCREEN SETUP. Pressí.● The SCREEN SETUP screen appears.● You cannot proceed with the next step
while a movie is playing back.● If a picture is already registered, the
IMAGE EXISTING screen is displayedwhich asks you if you want to cancel thecurrently registered picture and register anew one.
2 Press Éí to select a picture youwant to register. Press .● The SCREEN SETUP screen appears
and asks if you are sure you want toregister a picture.
Mode dial setting
Arrow pad
button
PW ON
PW OFF
SCREEN SETUP
CANCEL SELECT GO
178
Chapte
r 8
Screen setup (Cont.)
● It is not possible to register movies or pictures that cannot be played backproperly on this camera.
3 Press Ñ to select OK.
4 Press to register the picture.
5 Press É to exit from the SCREENSETUP screen.
Note
SCREEN SETUP
CANCEL SELECT GO
OK
CANCEL
SET AS PW ON SCREEN
When selecting PW ON
179
Chapte
r 8
File name
The camera automatically creates file names and folder names for images tobe stored in. Files can be numbered from 0001 to 9999 and folders can benumbered from 100 to 999. Examples are shown below.
● Month: Jan. - Sep. = 1 - 9, Oct. = A, Nov. = B, Dec. = C
There are two choices here: RESET or AUTO. Choose the one that is best foryou when transferring images to a computer.
� RESETWhen RESET is selected, the file number and folder number are reset everytime a new card is inserted in the camera. The folder number returns to No.100, and the file number returns to No. 0001. This is useful when groupingfiles on separate cards.� AUTOWhen AUTO is selected, the same folder number is retained, but the filenumber continues from the previous card, so that the same file number is notused on different cards. This helps you to manage multiple cards. This isuseful when a group of files stretches over more than one card.
180
Chapte
r 8
File name (Cont.)
● When the File No. reaches 9999The file number returns to 0001, and the folder number changes, forexample, from No. 100 to No. 101.
● When both the Folder and File No. reach each maximum number(999/9999)The number of storable pictures becomes 0, even if the card is not fullyet. No more pictures can be taken. Reset the file name, then replace thecard with a new one.
TIPS
Mode dial setting
1 In the top menu, select MODE MENUT SETUP T FILE NAME.
2 Select RESET or AUTO, then press .
Factory default setting: RESET
RESETAUTOSE
TUP
CAM
CARD
PIC
SLEEP
FILE NAME
SHUTTER
MY MODE SETUP
button
181
Chapte
r 8
Pixel Mapping
The Pixel Mapping feature allows the camera to check and adjust the CCDand image processing circuit automatically. It is not necessary to operate thisfunction frequently.It is recommended that you run Pixel Mapping once a year. Wait a fewminutes after the monitor is used or continuous shots are taken to allow forproper performance of the Pixel Mapping function.
1 In the top menu, select MODE MENUT SETUP T PIXEL MAPPING. Pressí.● START appears.
2 Press .● A progress bar appears during Pixel
Mapping.● When Pixel Mapping is finished, the
screen returns to the menu.
SETU
PCA
MCA
RDPI
C
STARTPIXEL MAPPING
VIDEO OUTm / ft
Mode dial setting
● If the power is turned off during Pixel Mapping, start again from Step 1.
Note
í button
button
182
Chapte
r 8 You can select NTSC or PAL according to your TV’s video signal type. Select
the video signal type of the region before shooting. If you use the wrong videosignal type, you will not be able to play back the recorded images properly onyour TV.
In the top menu, select MODE MENU TSETUP T “VIDEO OUT” T NTSC or PAL.Press . Press again to cancel themenu.● The factory default setting varies depending
on the area where you purchased thiscamera.
Video signal types by regionNTSC : Japan, Taiwan, Korea, U.S.APAL : Europe, ChinaBe sure to check your region’s video signaltype before you use the camera with a TV.
Mode dial setting
Video output selection
button
183
Chapte
r 8
Measurement units: m/ft (meters/feet)
Measurement units can be selected from either meters or feet in the manualfocus mode. (P. 69) At close ranges, the camera replaces meters/feet with centimeters/inches.
In the top menu, select MODE MENU TSETUP T m/ft T m or ft. Press .Press again to cancel the menu.
Factory default setting: m
Mode dial setting
button
184
Chapte
r 9
Chapte
r 9
Pri
nt
sett
ing
How to print pictures
When you want to print out pictures that you have taken with this camera andstored on a card, use one of the following options:
� Print Reserve (P. 186) — for printing at a photo lab that supportsDPOF or for printing on a DPOF compatible printerApply Print Reserve to your pictures. This allows you to add printing data(number of prints, date printed on pictures, etc.) to the pictures you havestored.● What is DPOF? DPOF is short for Digital Print Order Format. DPOF is a format used torecord automatic print information from cameras. By specifying whichimages are to be printed, the images can be printed easily by DPOF-compatible printing service labs or a personal DPOF-compatible printer.
� Printing on an Olympus CAMEDIA P-400, P-330N(E) or P-200 digitalprinter:If you insert a card with Print Reserve data into the printer, printing ispossible without using a computer. For more details, refer to the printerinstructions.
� Transferring pictures to a computer and printing them from a printerconnected to the computer:If your computer has software applications installed that support JPEGimages (Internet browsers, Paint software, etc.), you can print out yourpictures on a printer connected to the computer. CAMEDIA Mastersoftware also enables printing. Print Reserve is not available.Refer to the application software instructions for details.
185
Chapte
r 9
How to print pictures (Cont.)
● Picture size and printingThe resolution of a computer/printer is generally based on the number ofdots (pixels) per square inch. This is called “dpi” (dots per inch). Thehigher the dpi value, the higher the resolution, and the better the printedresults. Keep in mind, however, that the dpi of the picture you want toprint does not change to match the printer resolution. This means thatwhen you print an image with a lower resolution than the printer, the sizeof the printed picture will be smaller. Although you can print magnifiedimages, picture quality will decrease. If you want to print large and high-quality pictures, set the picture size in the camera as high as possible(higher record mode) (P. 112).
TIPS
● DPOF reservations set by another device cannot be changed by thiscamera. Make changes using the original device.
● If a card contains DPOF reservations set by another device, enteringreservations using this camera may overwrite the previous reservations.
● Even if an image appears with the message “PICTURE ERROR”, Printreserve may be performed on it. In such a case, the print reserve icon ( )does not appear where an image is displayed for full view. Since appears where multiple images are displayed (index-display mode), it ispossible to confirm the print reserve status.
● You cannot print out pictures with a printer such as the Olympus P-300digital printer that can be connected directly to this camera.
● Not all functions may be available on all printers or at all photo labs.● Only the first 999 images can be printed on the P-330N(E) printer.● Some TIFF images may not be printed.● Print reserve may take considerable time in some cases.● Print reserve cannot be performed when using a card with a write-protect
seal (SmartMedia).
Note
186
Chapte
r 9
1 Use the arrow pad to play back a stillpicture.● You cannot use Print reserve on pictures
with .
2 Press .● The PRINT ORDER screen appears.
3 Press Ñ or ñ to select x (number of prints) or (date/time),then press í to go to the setting. Perform each setting asillustrated.
All-frame print reserve
Mode dial setting
EXITEXIT SELECTSELECT GOGO
PRINT ORDER SETTINGPRINT ORDER SETTINGPRINT ORDEREDPRINT ORDERED
RESET
KEEP
EXITEXIT SELECTSELECT GOGO
PRINT ORDER PRINT ORDER
If Print Reserve data is already stored on the card, thePRINT ORDER SETTING screen appears giving youthe choice of resetting the data or keeping it (P. 194).
Select .
GOGO
0DATE
EXITEXIT SELECTSELECT
0
EXITEXIT SELECTSELECT GOGO
EXITEXIT SELECTSELECT GOGO
NODATETIME
When selecting x
When selecting
Increases the number.
Decreases the number.
Select NO, DATE or TIME.
(Print)button
Ññí buttons
button
187
Chapte
r 9
All-frame print reserve
4 After all settings are complete, press .● The top menu appears.
5 Press to exit from the top menu.● The screen exits from the Print Reserve mode.● The playback mode is restored and the Print Reserve mark and number
of prints are displayed.
188
Chapte
r 9
1 Use the arrow pad to play back a stillpicture.● You cannot use Print reserve on pictures
with .
2 Press .● The PRINT ORDER screen appears.
3 Select a frame you want to print. Press.
● The menu appears.
Single-frame print reserve
When selecting a frame forPrint Reserve
GOSELECT
HQ
’02.12.23 21:5624
Mode dial setting
EXITEXIT SELECTSELECT GOGO
PRINT ORDER SETTINGPRINT ORDER SETTINGPRINT ORDEREDPRINT ORDERED
RESET
KEEP
EXITEXIT SELECTSELECT GOGO
PRINT ORDER PRINT ORDER
If Print Reserve data is already stored on the card, thePRINT ORDER SETTING screen appears giving youthe choice of resetting the data or keeping it (P. 194).
Select .
(Print)button
Ññí buttons
button
189
Chapte
r 9
Single-frame print reserve (Cont.)
0DATENO
GOGOEXITEXIT SELECTSELECT
4 Select an appropriate Print reservesetting (see below) using the arrow pad.
MORE: Sets the number of prints,date/time and trim size.T Go to Step 5.
SINGLE PRINT:Sets single-frame print and thedate. Trimming setting is notavailable.T Go to Step 6.
CANCEL: Cancels the Print reserve.T Go to Step 6.
END: Completes the Print reserve.T Go to Step 7.
5 In the screen, set x (number of prints), (date/time) and (trimming). When setting is complete, press .● A picture is played back.
Select x (number of prints)or (date/time).
Increases the number.
Decreases the number.
To “Trimming setting”(P. 191).
DATETIME
N O
EXITEXIT SELECTSELECT GOGO
SINGLE PRINT
CANCEL
END MORE
190
Chapte
r 9
Single-frame print reserve (Cont.)
6 Press to display the top menu again (as in Step 4). Press É toselect END.● The PRINT ORDER screen appears.● To perform Print Reserve for more pictures, repeat steps 3 – 6.
7 Press É repeatedly until the PRINT ORDER screen disappears.● The top menu appears.
8 Press to exit the top menu.● Make sure that the Print Reserve mark, number of prints and date/time
are displayed on the selected images. If the number of prints is set to 1,no number is displayed; is displayed instead.
191
Chapte
r 9
Trimming setting
1 Do steps 1 – 5 of“ S i n g l e - f r a m eprint reserve”. Instep 5, select (P. 188).
It is possible to enlarge a part of a recorded picture and to print out theenlarged section only.
If has been set already, the screenappears. Select RESET and press .
● If you select OK or CANCEL, then press ,the screen returns to the screen, which isdisplayed in step 5 on P. 189.OK :Saves the current trimming size.RESET :Sets a new trimming size.
(Go to Step 2).CANCEL :Cancels the trimming size.
CANCEL
RESET
O K
2 Use the Arrow pad and the Zoom lever to determine the position andextent of trimming.
Move upward
Move to the right
Move downward
Move to the left
Mode dial setting
Change size
(Go to Step 2)
SINGLE PRINT
CANCEL
END MORE
192
Chapte
r 9
Trimming setting (Cont.)
3 Press to complete setting.
4 Select OK on the screen, which is displayed in step 1. ● The screen returns to the screen.
5 To complete setting, press twice.
6 Press É to select END.● The PRINT ORDER screen appears.
7 Press É repeatedly until the PRINT ORDER screen disappears.
CANCEL
RESET
O K
193
Chapte
r 9
Trimming setting (Cont.)
● The size of the printed picture varies depending on the printer setting. If thetrimmed picture size is small, printing magnification increases accordingly,resulting in a printed picture with lower resolution.
● For best results with close-up prints, it is recommended to use the TIFF,SHQ or HQ mode.
● The vertical to horizontal ratio in the trimming screen can be changed usingthe arrow pad, but if the zoom lever is used, the ratio is fixed at 4:3.Ifimages recorded in are trimmed, the ratio is also fixed at 4:3.3:2
Note
1 Use the arrow pad to play back a still picture.
2 Press to display the PRINT ORDER SETTING screen.● If Print Reserve data is NOT stored on the card, the PRINT ORDER
SETTING screen does not appear.
3 Select RESET.● If you cancel resetting Print
Reserve settings, press ñ toselect KEEP.
4 Press É to return to the top menu. Press to exit from the topmenu.
194
Chapte
r 9
Resetting Print Reserve
Allows you to reset all Print Reserve settings for pictures stored on a card.
EXIT SELECT GO
PRINT ORDER SETTINGPRINT ORDERED
RESET
KEEP
Mode dial setting
195
Chapte
r 10
Chapte
r 10
Ex
tern
al fl
ash
External flash
Various types of flash shooting are possible with the FL-40 external flash,which can be used either by itself or together with the main flash.If the FL-40 is used, flash mode and exposure compensation will be detectedautomatically by the camera, allowing the main flash and external flash tofunction together.Using the two flashes together allows for more sophisticated lighting, such ascatch lighting.To connect the FL-40 to the camera, the FL-BK01 flash bracket (optional) andFL-CB01 bracket cable (optional) are required.
1 Mount the FL-40 external flash on theflash bracket, fasten the bracket to thecamera’s tripod socket and connectthe flash bracket and the camera’s 5-pin external flash socket using thebracket cable.● Refer to each separate instruction
manual for the external flash, flashbracket, and flash cable.
● The 5-pin external flash socket cover onthe camera is threaded. Unscrew andremove it before connecting the bracketcable.
5-pin external flash socket
Using the FL-40 external flash
Mode dial setting
196
Chapte
r 10
External flash (Cont.)
2 Turn on the external flash.● The mode for the external flash is TTL-
AUTO.● When the shutter button is pressed
halfway, the external f lash beginscommunicating with the camera andautomatically switches to TTL-AUTO.
● While the camera’s monitor is on, thecamera is communicating with theexternal f lash and TTL-AUTO isdisplayed.
3 Press the (flash) switch on thecamera to open the main flash.
4 Press the (flash mode) button toselect the camera’s flash mode (P. 81).
3 Make sure that the main flash isclosed. If it opens at any time duringshooting, close it.
4 Press the button to select a flashmode (P. 81).
● If close-up pictures are overexposed, try using the main flash by itself.● When the main flash and the FL-40 are used together, the main flash is
used as the compensating light source. This means that if the amount oflight from the FL-40 is insufficient (beyond its working range), the resultingpictures may be underexposed.
Note
First, do steps 1 and 2 of “Using the FL-40 external flash” (P. 195).
Using the FL-40 external flash by itself
(flash mode)button
(flash) switch
197
Chapte
r 10
External flash (Cont.)
Mode dial setting
1 Mount the external flash on the flashbracket, fasten the bracket to thecamera’s tripod socket and connect theflash bracket and the camera’s 5-pinexternal flash socket using the bracketcable.
2 Select M from “A/S/M mode setting”.See P. 52. Adjust the shutter speed andthe aperture (P. 60).● Remember that a slow shutter speed
can produce blurred images. For thebest results, we recommend that youset the shutter speed from 1/200 to1/300 seconds.
3 Turn on the external flash.
4 Set the mode that automaticallycontrols the amount of light emitted bythe external flash.
5 Set ISO and aperture on the externalflash to match the camera’s settings.● See the user’s manual for the external
flash to select the modes.
External flashes (commercially available) can also be used with the FL-BK01(optional) and FL-CB01 bracket cable (optional) when the camera’s mode dialis set to A/S/M.For details on compatible commercially available external flashes, refer to thenext page.
Using commercially available external flashes
5-pin external flash socket
198
Chapte
r 10
External flash (Cont.)
● The camera’s flash mode will have no effect on the external flash. Theexternal flash will fire even when the camera’s flash mode is set to (off).
● Confirm in advance that the external flash you are using is synchronizedwith the camera.
Note
199
Chapte
r 10
External flash (Cont.)
When selecting an external flash, use products which meet the followingbasic conditions.(1) Some flashes available on the market operate with a high voltage synchro
terminal. If one of these is used, it may not function properly. Contact themanufacturer of the flash you are using concerning the specifications ofthe flash’s synchro terminal.
(2) Some flashes available on the market have the polarity of the synchroterminal reversed. In this case, even if the flash is connected, it will notfire. Contact the manufacturer of the flash for more information.
(3) Exposures when using an external flash require that adjustments bemade on the external flash unit. If an external flash is used in the Automode, match it with the F value and ISO sensitivity settings on thecamera.
(4) Even if the auto F value and ISO sensitivity of the external flash are set tothe same conditions as those on the camera, depending on thephotographic conditions, it is possible that the correct exposure may notbe obtained anyway. In such a case, adjust the auto F value or ISO valueon external flash unit or calculate the distance in the manual mode anduse it that way. However, generally, the auto F value and ISO value canonly be adjusted 1 step and beyond that, exposure compensation cannotbe made. (Exposure compensation in the camera is made invalid inexternal flash photography.)
(5) Use a flash which is capable of covering an illumination angle for a 35 mmor larger lens when calculated for 35 mm film. However, in close-upphotography with the lens on the wide setting, the bottom of the imagemay not expose correctly. The ideal is to have a wide angle adapter to fiton the flash and spread the illumination angle so it is wider.
(6) Use a flash unit with a flash time of 1/200 sec. or less when using theflash at full strength. For devices with a long flash time, such as a ringflash, a portion of the light emitted will not contribute to the exposure.
(7) If a flash unit or other accessory with additional communicationsfunctions other than the FL-40 is used, it may not only fail tofunction properly, but may also cause damage to the camera’scircuitry. Do not use such a device.
Compatible commercially available external flashes
200
Chapte
r 11
Chapte
r 11
Mis
ce
lla
ne
ou
sTroubleshooting
1 The batteries areexhausted.
2 The power is off.
3 The batteries areloaded incorrectly.
4 The batteries aretemporarily unable tofunction.
5 It is connected to apersonal computer.
6 The camera is in thesleep mode.
1 Replace the batteries withnew ones.
2 Press the POWER switch toturn on the power.
3 Reload the batteriescorrectly.
4 The batteries may be toocold. Warm them before useby allowing them to return toroom temperature, or ifoutdoors, putting them in aninner jacket pocket.
5 The camera will not operatewhile it is connected to apersonal computer.
6 Operate the camera (pressthe shutter button, turn themode dial, etc.)
P. 20
P. 27
P. 20
–
–
P. 173
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The camera does not turn on or function buttons do not respond.
The monitor does not turn on.
1 The camera is in thesleep mode.
2 The camera is in thebattery save mode.
1 Operate the camera (pressthe shutter button, turn themode dial, etc.)
2 Set BATTERY SAVE to OFFin the menu.
P. 173
P. 174
The viewfinder does not turn on.
1 The camera is in thesleep mode.
2 The camera is in theplayback mode.
1 Operate the camera (pressthe shutter button, turn themode dial, etc.)
2 Set the mode dial to anyposition except .
P. 173
P. 52
201
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
No picture is taken when the shutter button is pressed.
1 The mode dial is set to.
2 The memory gauge isfull.
3 The flash has notfinished charging.
4 The card access lampblinks during recordingin the mode.
5 There is a problem withthe card.
6 The card is full.
7 The batteries ran out ofpower.
8 The monitor indicationsdisappear, or only thebattery check lights up.
9 A write-protectadhesive seal is placedon the card or there isno card in the camera(Smart Media).
1 Set the mode dial to anyposition except .
2 Wait until there is room inthe memory gauge.
3 Remove your finger from theshutter button and wait untilthe orange lamp stopsblinking. Take your shotagain.
4 The recorded movie imagedata is being written to thecard.You can start shootingagain when the card accesslamp stops blinking.
5 See the error code chart.
6 Erase unwanted pictures orinsert a new card. Beforeerasing, download importantimages to a PC.
7 Replace the batteries withnew ones.
8 Replace the batteries withnew ones. (Do not open thebattery compartment coverwhen the card access lampis blinking.)
9 Insert a new card in thecamera.
P. 52
P. 16
P. 83
P. 75
P. 208
P. 25
P. 20
P. 20
P. 25
202
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
1 The flash is closed.
2 The subject is brightenough to shootwithout flash.
3 Sequential shooting ison.
4 You are recordingmovies.
5 Panorama shooting isset.
6 FUNCTION is set toBLACK/WHITEBOARD.
1 Press the flash switch toraise the flash.
2 Set the flash to Fill-In mode.
3 Set the drive mode to (single-frame shooting).
4 Select a shooting modeother than .
5 Cancel the Panorama mode.
6 Set FUNCTION to OFF.
P. 81
P. 81
P. 99
P. 52
P. 105
P. 110
The date recorded with the image data is wrong.
1 The date is not set.
2 The camera has beenleft for too long with thebatteries removed andthe date/time settingwas canceled.
1 Set the date. The clockadjustment is not factory-preset.
2 Set the date again.
P. 30
P. 30
Your customized settings have been canceled.
1 You turned off thepower without savingthe settings.
1 Set ALL RESET to OFF. P. 155
The flash does not fire.
203
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
Pictures you have already taken do not appear on the monitor.
1 The camera is in theshooting mode.
2 There is no picture onthe card.
3 There is a problem withthe card.
4 The camera isconnected to a TV.
5 The monitor is not on.
1 Set the mode dial to .
2 NO PICTURE appears on themonitor. Record pictures.
3 See the error code chart.
4 The monitor does notfunction when the camera isconnected to a TV.
5 Press to turn on themonitor.
P. 127
P. 36, 37
P. 208
P. 152
P. 38
1 The brightness is notadjusted properly.
2 The monitor is exposedto direct sunlight.
1 Adjust the brightness.
2 Block the sunlight or moveout of the sunlight.
P. 168
–
The monitor is not clear.
1 The diopter is notadjusted properly.
2 The brightness is notadjusted properly.
1 Adjust the diopter again.
2 Adjust the brightness.
P. 35
P. 168
The viewfinder display is not clear.
Picture rotate, Picture protect, Single-frame erase, All-frame erase,Print reserve and Card formatting cannot be performed.
1 A write-protect adhesiveseal is affixed to thecard (SmartMedia).
1 Use the card after peelingoff the seal. Do not reusethe write protect seal.
P. 24
204
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The picture is out of focus.
1 The camera movedwhen the shutter buttonwas pressed.
2 The AF target markwas not on the subject.
3 The lens is dirty.
4 The shutter button waspressed while standingin front of the camerain the self-timer mode.
5 The manual focus wasused with the wrongfocal distance.
1 Hold the camera correctly,and press the shutter button.Use a tripod, etc. to shoot anight scene.
2 Position the AF target markon the subject, or use thefocus lock.
3 Clean the lens with a softdry cloth.
4 Press the shutter button whilelooking into the viewfinder,not while standing in front ofthe camera.
6 Use the right manual focusfor the distance.
P. 35
P. 62, 65
P. 207
P. 95
P. 69
1 The flash is in the auto-flash mode.
1 This “red-eye phenomenon”occurs with all cameras when aflash is used. It is caused bylight from the flash reflecting offthe retina at the back of theeye. Red-eye varies dependingon the individual and theshooting conditions such asambient lighting. Use of theRed-Eye Reducing Pre-Flashmode significantly reduces thisphenomenon.
P. 81
The subject’s eyes appear red in pictures recorded with the flash.
205
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The picture is too dark.
1 The flash was blockedby a finger.
2 The subject was out ofthe working range ofthe flash.
3 The flash mode wasset to the Off mode.
4 The subject was toosmall and was backlit.
5 The sequential modewas used.
1 Hold the camera correctly,keeping your fingers awayfrom the flash.
2 Shoot within the flashworking range.
3 Press the flash switch toraise the flash.
4 Set the flash to Fill-In mode. Or,use the spot metering mode.
5 Higher shutter speeds areused when the sequentialmode is selected which mayresult in pictures that aredarker than usual.
P. 35
P. 82
P. 81
P. 78, 81
P. 99
The colors of pictures taken indoors look unnatural.
1 Indoor lighting canaffect the picture’scolors.
2 There is no white in thesubject.
3 The white balancesetting is wrong.
1 Set the white balanceaccording to the lighting.
2 Try to include somethingwhite in the picture or shootusing the Fill-in flash mode.
3 Adjust the white balance tothe light source.
P. 120
P. 81
P. 120
1 The flash mode wasset to the Fill-in flashmode.
2 The subject wasexcessively illuminated.
1 Select a flash mode otherthan the Fill-in flash mode.
2 Adjust the exposurecompensation or change thecamera position toward thesubject.
P. 81
P. 119
The picture is too bright.
206
Chapte
r 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
Halation produces unnatural colors in a picture.
1 Excessively brightultraviolet light on thesubject, such assunlight shiningthrough the leaves oftrees, window framesin bright light at night,reflection of metalsunder direct sunlight,etc.
1 Use an UV filter. Using a UVfilter is recommended onlyunder the conditionsdescribed in the left columnso as not to lose the correctcolor balance.
2 Process the pictures using agraphics application thatsupports JPEG (Paint ShopPro, Photoshop, etc.). Forexample, after picking upunnatural colors with asyringe tool, etc., you canselect color areas, and trycolor conversion orsaturation adjustment. Fordetails, refer to the manualof the graphics applicationyou are using.
–
The picture has obscured edge(s).
1 The lens was partlyblocked by a finger orthe strap.
1 Hold the camera correctly,keeping your fingers and thestrap away from the lens.
P. 35
207
Chapte
r 11
User maintenance
Turn off the power and attach the lens cap to the lens.
1 Turn off the camera. (P. 27)
2 Remove the batteries (P. 20). When using an AC adapter, unplug theAC adapter from the camera and the AC outlet.
3 Exterior:Wipe gently with a soft cloth. To wipe off heavy dirt, soak the cloth indiluted mild soap and wring it well. Wipe off the camera with the dampcloth and then dry it with a dry cloth. If you have used your camera at thebeach, use a cloth dampened with fresh water.Monitor and viewfinder:Wipe gently with a soft cloth.Lens:Blow dust off the lens with a blower brush (commercially available), thenwipe gently with lens cleaning paper.Card:Wipe gently with a soft cloth.
After use
Cleaning the camera
● Do not use a strong solvent such as benzine or alcohol, or chemicallytreated cloth.
● Cleaning should be done only after the batteries have been removed orother power supply units have been disconnected.
● Mold may form on the lens surface if the lens is left dirty.
Note
208
Chapte
r 11
Error codes
If there is a problem with your camera, a blinking error code will appear.
Possible causes
The card is notinserted, or it cannotbe recognized.
No more picturescan be taken.
Writing to the card isprohibited.
Cannot record, playback or erasepictures on this card.
The recorded imagecannot be playedback with thiscamera.
Monitor indications Corrective action
Insert a card correctly orinsert a different card.
Replace the card or eraseunwanted pictures.
Remove the write-protectadhesive seal attached tothe card (SmartMedia).
If the card is dirty, wipe thegold contacts with a cleantissue and insert it again. Ifthe problem is still notcorrected, the card cannot beused.
Download the image to apersonal computer and useimage processing softwareto view it. If that cannot bedone, the image file isdamaged.
209
Chapte
r 11
Error codes (Cont.)
Possible causes
The card is notformatted.
There are nopictures on the card,so there is nothing toplay back.
There is no emptyspace on the card, soit cannot record newinformation such asprint data.
The card cover isopen.
The battery is dead.The camera stopsworking.
Monitor indications
CARD-COVER OPEN
Consult your nearest Olympus dealer orcustomer support department (see back cover).
Other indications
Corrective action
Format the card.
Insert a card that containsimages.
Replace the card or eraseunneeded pictures.
Close the card cover.
Install either new or freshlycharged batteries.
210
Chapte
r 11
Menu maps
CAMERA
PICTURE
CARD
MODE MENU
To the next page
P modeTop menu Tab Function Setting
DRIVE
ISO SLOWNOISE REDUCTIONMULTI METERINGDIGITAL ZOOMFULLTIME AFAF MODE PANORAMA2 IN 1FUNCTION
AF AREAINFO
WB
SHARPNESSCONTRAST SATURATION CARD SETUP
, , , , BKT ( 0.3/ 0.7/ 1.0, x3/x5)*100, 200, 400–2.0 – +2.0 SLOW1, SLOW, SLOW2OFF, ONOFF, ONOFF, ONOFF, ONiESP, SPOTOFF, ONOFF, ON
OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
OFF, ONOFF, ONTIFF (2048x1536, 3:2 2048x1360, 1600x1200, 1280x960, 1024x768, 640x480)SHQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)HQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)SQ1 (1600x1200, 1280x960/HIGH, NORMAL)SQ2 (1024x768, 640x480/HIGH, NORMAL)AUTO, PRESET ( , , , , , ), –7 – +7–5 – +5–5 – +5–5 – +5FORMAT, CANCEL
211
Chapte
r 11
Menu maps (Cont.)
ALL RESET
PW ON/OFF SETUP
REC VIEW SHUTTER SLEEPMY MODE SETUP
FILE NAMEPIXEL MAPPING m/ftVIDEO OUTBATTERY SAVESHORT CUT
CUSTOM BUTTON
OFF, ONENGLISH, FRANCAIS, DEUTSCH,ESPAÑOLSCREEN/OFF, 1, 2SOUND/OFF, ONOFF, ONOFF, 1, 2/LOW, HIGHOFF, 1, 2/LOW, HIGH30SEC, 1MIN, 3MIN, 5MIN,10MINCURRENT (SET, CANCEL), RESET (ALL RESET, CANCEL), CUSTOM*, 1/ 2/ 3/ 4 RESET, AUTO
m, ftNTSC, PALOFF, ONA/B/C, all items included in the CAMERA tab and all items included in the PICTURE tabAE LOCK, DRIVE, ISO, A/S/M, SLOW, NOISE REDUCTION, DIGITAL ZOOM, FULLTIME AF, AF MODE, ,FUNCTION, INFO, , , WBSame settings as DRIVE on the previous page.Same settings as on the previous page.Same settings as WB on the previous page.
SETUPMODE MENU
DRIVE
WB
P mode (cont.)
* For CUSTOM settings, refer to “Available items and factory default settings” on P. 166.
Top menu Tab Function Setting
212
Chapte
r 11
Menu maps (Cont.)
DRIVE
ISOA/S/M SLOW NOISE REDUCTIONMULTI METERINGDIGITAL ZOOM FULLTIME AF AF MODE 2 IN 1FUNCTION
AF AREAINFO
WB
SHARPNESSCONTRAST SATURATION CARD SETUP
, , , , BKT ( 0.3/ 0.7/ 1.0, x3/x5)*100, 200, 400A, S, M–2.0 – +2.0 SLOW1, SLOW, SLOW2OFF, ONOFF, ONOFF, ONOFF, ONiESP, SPOTOFF, ONOFF, ON
OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
OFF, ONOFF, ONTIFF (2048x1536, 3:2 2048x1360, 1600x1200, 1280x960, 1024x768, 640x480)SHQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)HQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)SQ1 (1600x1200, 1280x960/HIGH, NORMAL)SQ2 (1024x768, 640x480/HIGH, NORMAL)AUTO, PRESET ( , , , , , ), –7 – +7–5 – +5–5 – +5–5 – +5FORMAT, CANCEL
CAMERA
PICTURE
CARD
MODE MENU
To the next page
Top menu Tab Function SettingA/S/M Mode
* Not available in the M mode.
213
Chapte
r 11
Menu maps (Cont.)
* For CUSTOM settings, refer to “Available items and factory default settings” on P. 166.
Top menu Tab Function Setting
A/S/M Mode (Cont.)
ALL RESETPW ON/OFF SETUP
REC VIEW SHUTTERSLEEPMY MODE SETUP
FILE NAMEPIXEL MAPPING m/ftVIDEO OUTBATTERY SAVESHORT CUT
CUSTOM BUTTON
OFF, ONSCREEN/OFF, 1, 2SOUND/OFF, ONOFF, ONOFF, 1, 2/LOW, HIGHOFF, 1, 2/LOW, HIGH30SEC, 1MIN, 3MIN, 5MIN,10MINCURRENT (SET, CANCEL), RESET (ALL RESET, CANCEL), CUSTOM*, 1/ 2/ 3/ 4 RESET, AUTO
m, ftNTSC, PALOFF, ONA/B/C, all items included in the CAMERA tab and all items included in the PICTURE tabAE LOCK, DRIVE, ISO, A/S/M, SLOW, NOISE REDUCTION, DIGITAL ZOOM, FULLTIME AF, AF MODE, ,FUNCTION, INFO, , , WBSame settings as DRIVE on the previous page.Same settings as on the previous page.Same settings as WB on the previous page.
SETUPMODE MENU
DRIVE
WB
214
Chapte
r 11
Menu maps (Cont.)
DRIVE
ISO 1/2/3/4 SLOWNOISE REDUCTION*MULTI METERING DIGITAL ZOOM*FULLTIME AFAF MODE PANORAMA*2 IN 1FUNCTION
AF AREAINFO
WB
SHARPNESSCONTRASTSATURATIONCARD SETUP
, , , , BKT ( 0.3/ 0.7/ 1.0, x3/x5)*AUTO, 100, 200, 400 1, 2, 3, 4–2.0 – +2.0 SLOW1, SLOW, SLOW2OFF, ONOFF, ONOFF, ONOFF, ONiESP, SPOTOFF, ONOFF, ON
OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARDOFF, ONOFF, ONOFF, ONTIFF (2048x1536, 3:2 2048x1360, 1600x1200, 1280x960, 1024x768, 640x480)SHQ (2048x1536, 3:2 2048x1360, ENLARGE 3200x2400)HQ (2048x1536, 3:2 2048x1360, ENLARGE 3200x2400)SQ1 (1600x1200, 1280x960/HIGH, NORMAL)SQ2 (1024x768, 640x480/HIGH, NORMAL)AUTO, PRESET ( , , , , , ), –7 – +7–5 – +5–5 – +5–5 – +5FORMAT, CANCEL
CAMERA
PICTURE
CARD
MODE MENU
To the next page
Top menu Tab Function Setting Mode
* Not available depending on the mode that the mode is based on. Refer to the menu maps for each mode.
NoteWhen you use the mode, the MODE MENU consists of the items listed in each menu map for the mode that the My mode is based on. Refer to the menu maps for each mode.
215
Chapte
r 11
Menu maps (Cont.)
Top menu Tab Function Setting
PW ON/OFF SETUP
REC VIEW SHUTTERSLEEPMY MODE SETUP
FILE NAMEPIXEL MAPPING m/ft VIDEO OUTBATTERY SAVESHORT CUT
CUSTOM BUTTON
SCREEN/OFF, 1, 2SOUND/OFF, ONOFF, ONOFF, 1, 2/LOW, HIGHOFF, 1, 2/LOW, HIGH30SEC, 1MIN, 3MIN, 5MIN,10MINCURRENT (SET, CANCEL), RESET (ALL RESET, CANCEL), CUSTOM*, 1/ 2/ 3/ 4 RESET, AUTO
m, ftNTSC, PALOFF, ONA/B/C, all items included in the CAMERA tab and all items included in the PICTURE tabAE LOCK, DRIVE, ISO, A/S/M, SLOW, NOISE REDUCTION, DIGITAL ZOOM, FULLTIME AF, AF MODE, ,FUNCTION, INFO, , , WBSame settings as DRIVE on the previous page.Same settings as on the previous page.Same settings as WB on the previous page.
SETUPMODE MENU
DRIVE
WB
Mode
* For CUSTOM settings, refer to “Available items and factory default settings” on P. 166.
NoteWhen you use the mode, the MODE MENU consists of the items listed in each menu map for the mode that the My mode is based on. Refer to the menu maps for each mode.
216
Chapte
r 11
Menu maps (Cont.)
DRIVE
ISO SLOW MULTI METERINGDIGITAL ZOOM* FULLTIME AFAF MODE *PANORAMA* 2 IN 1 FUNCTION
AF AREAINFO
WB
SHARPNESSCONTRASTSATURATION CARD SETUP
, , , , BKT ( 0.3 / 0.7/ 1.0, x3/x5)AUTO, 100, 200, 400–2.0 – +2.0 SLOW1, SLOW, SLOW2OFF, ONOFF, ONOFF, ONiESP, SPOTOFF, ONOFF, ON
OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
OFF, ONOFF, ONTIFF (2048x1536, 3:2 2048x1360, 1600x1200, 1280x960, 1024x768, 640x480)SHQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)HQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)SQ1 (1600x1200, 1280x960/HIGH, NORMAL)SQ2 (1024x768, 640x480/HIGH, NORMAL)AUTO, PRESET ( , , , , , ), –7 – +7–5 – +5–5 – +5–5 – +5FORMAT, CANCEL
CAMERA
PICTURE
CARD
MODE MENU
To the next page
Top menu Tab Function Setting
* Not available in the mode.
/ / / / / mode
217
Chapte
r 11
Menu maps (Cont.)
Top menu Tab Function Setting
/ / / / / mode
ALL RESETPW ON/OFF SETUP
REC VIEW SHUTTERSLEEPMY MODE SETUP
FILE NAMEPIXEL MAPPING m/ft VIDEO OUTBATTERY SAVESHORT CUT
CUSTOM BUTTON
OFF, ONSCREEN/OFF, 1, 2SOUND/OFF, ONOFF, ONOFF, 1, 2/LOW, HIGHOFF, 1, 2/LOW, HIGH30SEC, 1MIN, 3MIN, 5MIN,10MINCURRENT (SET, CANCEL), RESET (ALL RESET, CANCEL), CUSTOM*, 1/ 2/ 3/ 4 RESET, AUTO
m, ftNTSC, PALOFF, ONA/B/C, all items included in the CAMERA tab and all items included in the PICTURE tabAE LOCK, DRIVE, ISO, A/S/M, SLOW, NOISE REDUCTION, DIGITAL ZOOM, FULLTIME AF, AF MODE, ,FUNCTION, INFO, , , , WBSame settings as DRIVE on the previous page.Same settings as on the previous page.Same settings as WB on the previous page.
SETUPMODE MENU
DRIVE
WB
* For CUSTOM settings, refer to “Available items and factory default settings” on P. 166.
218
Chapte
r 11
Menu maps (Cont.)
ISODIGITAL ZOOMFULLTIME AF FUNCTION SHARPNESSCONTRAST SATURATION CARD SETUPALL RESETPW ON/OFF SETUP
FILE NAMEPIXEL MAPPING VIDEO OUTBATTERY SAVE
OFF, ONAUTO, 100, 200, 400, 800OFF, ONOFF, ONOFF, ONOFF, BLACK&WHITE, SEPIA–7 – +7–5 – +5–5 – +5–5 – +5FORMAT, CANCELOFF, ONSCREEN/OFF, 1, 2SOUND/OFF, ONOFF, 1, 2/LOW, HIGHRESET, AUTO
NTSC, PALOFF, ONHQ, SQAUTO, PRESET ( , , , , , ),
CAMERA
PICTURE
CARDSETUP
MODE MENU
WB
mode
Top menu Tab Function Setting
DRIVE
CARD SETUP
, , , , BKT ( 0.3 / 0.7/ 1.0, x3/x5)TIFF (2048x1536, 3:2 2048x1360, 1600x1200, 1280x960, 1024x768, 640x480)SHQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)HQ (2048x1536, 3:2 2048x1360, ENLARGE SIZE 3200x2400)SQ1 (1600x1200, 1280x960/HIGH, NORMAL)SQ2 (1024x768, 640x480/HIGH, NORMAL)
FORMAT, CANCEL
Function Setting
@ mode
219
Chapte
r 11
Menu maps (Cont.)
CARD SETUP ALL RESETPW ON/OFF SETUP SCREEN SETUPVOLUME VIDEO OUT
MOVIE PLAYBACK
INDEXEDIT
640 x 480, 320 x 240, CANCELOK, CANCELCANCEL, FORMATOFF, ONSCREEN/OFF, 1, 2SOUND/OFF, ONPW ON, PW OFFOFF, +1 – +5OFF, 1, 2/LOW, HIGH
NTSC, PAL4, 9, 16
PLAYBACK, FRAME BY FRAME, EXITOK, RESET, CANCELOK, RESET, CANCEL
PLAYEDIT*1
CARDSETUP
MODE MENU
*1MOVIE PLAY *2
INFO
mode
*1 Not displayed during movie playback.*2 Not displayed during still picture playback.
Top menu Tab Function Setting
220
Chapte
r 11
Menu functions & factory defaultsettings
● When “–” appears in a mode column, it means that the corresponding function is notavailable in that mode or cannot be set in that mode. Some function settings areautomatically determined by the settings selected in other modes.
* Factory default settings of the mode differs depending on which shooting mode isselected.
–
A S M P
AUTO 100 AUTO –
–
– A –
�0 – �0 –
– SLOW1 – SLOW1 –
OFF – OFF –
OFF – OFF (Notavailable in M.) OFF –
OFFOFF
(Not availablein .)
OFF –
OFF –
iESP – iESP –
OFF – OFF –
OFFOFF
(Not availablein .)
OFF –
OFF –
OFF – OFF
OFF – OFF
HQ (2048 x 1536)HQ
(320 x240)
HQ (2048 x 1536) –
AUTO (when selecting PRESET: ) –
�0 –
Mode
Function
DRIVE
ISO
A/S/M
SLOW
NOISE REDUCTION
MULTI METERING
DIGITAL ZOOM
FULLTIME AF
AF MODE
FUNCTION
INFO
WB
221
Chapte
r 11
Menu functions & factory default settings (Cont.)
● When “–” appears in a mode column, it means that the corresponding function is notavailable in that mode or cannot be set in that mode. Some function settings areautomatically determined by the settings selected in other modes.
* Factory default settings of the mode differs depending on which shooting mode isselected.
A S M P
ON (Not available in .)
1/HIGH–
ON – ON –
1/HIGH – 1/HIGH –
– CURRENT CURRENT– –
– SCREEN/1, SOUND/ON
–
– PWON
OFF 3MIN –
– RESET –
– �0
– ENGLISH
Y M D/2002/1/1
–
–NTSC or PAL (Factory default setting depends on the
region where you purchased this camera.)
– m – m
OFF –
– –A: DRIVEB:C: WB
– 9
– –AEL AEL
–A: DRIVEB:C: WB
�0 –
�0 –
�0 –
–
– OFF
Mode
Function
SHARPNESS
CONTRAST
SATURATION
ALL RESET
PW ON/OFF SETUP
REC VIEW
VOLUME
SHUTTER
SLEEP
SCREEN SETUP
MY MODE SETUP
FILE NAME
m/ft
VIDEO OUT
BATTERY SAVE
SHORT CUT
CUSTOM BUTTON
222
Chapte
r 11
Modes & Shooting functions
�
–
–
–
–
–
–
–
�
–
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
–
�
�
�
�
�
�
�
–
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
–
�
–
–
–
–
–
–
–
–
�
�
�
�
–
�
–
–
–
–
–
–
–
–
–
�
�
–
–
–
–
–
–
–
�
–
� (Not available in .)
� (Not available in .)
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Mode
Function
Taking still pictures
Recording movies
A/S/M mode setting
Aperture value setting
Aperture priority shooting
Shutter speed setting
Shutter priority shooting
Manual shooting
“My Mode” setting
“My Mode” shooting
Zoom
Digital zoom
Auto focus
Focus lock
AF mode setting
Fulltime AF
AF AREA
Manual focus
Auto
Red-eye Reduction
Fill-in
1st Curtain
2nd Curtain
1st Curtain withRed-eye Reduction
Flash intensity control
Spot metering
P
�
–
–
–
–
–
–
–
–
–
�
–
�
–
–
–
–
–
�
�
–
–
–
–
–
–
A S M
Fla
sh
� : Available, – : Not available
*The shooting mode selected in the mode also affects availability of some functions.For details, refer to the individual function page.
223
Chapte
r 11
Modes & Shooting functions (Cont.)
� : Available, – : Not available
*The shooting mode selected in the mode also affects availability of some functions.For details, refer to the individual function page.
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
–
�
�
�
�
�
�
�
�
�
�
�
�
�
–
–
�
�
�
–
–
–
–
–
–
�
�
�
�
�
�
�
�
�
�
–
–
�
�
�
�
�
�
�
�
�
� (Not available in .)
�
�
�
�
�
�
�
�
�
�
�
Available only in .
�
Mode
Function
Multi metering
AE lock
Macro shooting
Self-timer shooting
Remote control
Sequential shooting
High-speed sequentialshooting
AF sequential shooting
Auto bracketing
Panorama shooting
2 in 1 shooting
Function shooting
Record mode setting
ISO setting
Exposurecompensation
Auto white balance
Preset white balancesetting , , , ,one-touch whitebalance
White balanceadjustment
Sharpness setting
Contrast setting
Saturation setting
Noise reduction
Custom button setting
P
–
–
�
�
�
�
�
�
–
–
–
–
�
–
–
–
–
–
–
–
–
–
–
A S M
224
Chapte
r 11
Modes & Shooting functions (Cont.)
� : Available, – : Not available
*The shooting mode selected in the mode also affects availability of some functions.For details, refer to the individual function page.
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
–
–
–
�
�
–
–
�
�
–
–
�
�
�
�
–
�
–
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
–
Mode
Function
Shortcut setting
My mode setup
All reset
Beep
Shutter sound
Rec view
Sleep timer
Battery save
Information display
Histogram display
Power on/off displaysetting
Monitor brightnessadjustment
File name setting
Pixel mapping
m/ft setting
Video output setting
Language setting
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
A S M
225
Chapte
r 11
Specifications
Product type Digital camera (for shooting and displaying)
Recording systemStill Digital recording, JPEG (in accordance with
Design rule for Camera File system (DCF)), TIFF(non-compression), Digital Print Order Format(DPOF)
Sound with Wave formatstill imagesMovie QuickTime Motion JPEG support
Memory 3V (3.3V) SmartMedia, 4 MB to 128 MB (allcards except 2 MB)xD-Picture Card (16 to 128 MB)
No. of storable pictures Record without sound(When a 16 MB 1 frame (TIFF: 2048x1536)card is used) Approx. 2 frames (SHQ: 3200x2400)
Approx. 8 frames (HQ: 3200x2400)Approx. 11 frames (SQ1: 1600x1200)Approx. 26 frames (SQ2: 1024x768)
No. of effective pixels 3,200,000 pixels
Image pickup device 1/2.7" CCD solid-state image pickup3.34 Megapixel (gross)
Recording image 3200 x 2400 pixels (SHQ/HQ)resolutions 2048 x 1536 pixels (TIFF/SHQ/HQ)
2048 x 1360 pixels (TIFF/SHQ/HQ)1600 x 1200 pixels (TIFF/SQ1)1280 x 960 pixels (TIFF/SQ1)1024 x 768 pixels (TIFF/SQ2)640 x 480 pixels (TIFF/SQ2)
Lens Olympus lens 5.9 mm to 59 mm, f2.8 to f3.5, 10 elements in 7 groups (equivalent to 38 mm to380 mm lens on 35 mm camera)
Photometric system Digital ESP metering, Spot metering system
Aperture W : f2.8 to f8T : f3.5 to f8
226
Chapte
r 11
Specifications (Cont.)
Shutter speed Used with mechanical shutter Still 1 to 1/1000 sec. (M mode: 16 to 1/1000 sec.;
when slow synchronization is used: 4 to 1/1000 sec.)
Movie 1/30 to 1/8000 sec.
Viewfinder 0.44" TFT color LCD display, approx. 180,000pixels
Monitor 1.5" TFT color LCD display Approx. 114,000 pixels
Battery charging time Approx. 6 sec. (at normal temperature with newfor flash batteries)
Autofocus TTL system autofocus, Contrast detection system,Focusing range: 0.1 m to ∞ (0.3 ft to ∞)
Outer connector DC-IN jack, USB connector (mini-B), A/V OUT jack, 5-pin external flash socket
Automatic calendar Up to 2099system
Operating environmentTemperature 0°C to 40°C (32°F to104°F) (operation)
–20°C to 60°C (– 4°F to 140°F) (storage)Humidity 30% to 90% (operation)
10% to 90% (storage)
Power supply For batteries, use 2 CR-V3 lithium battery packs,or 4 AA (R6) NiMH batteries, NiCd batteries,Alkaline batteries, lithium batteries or optional AC adapter.Manganese (zinc-carbon) batteries cannot beused.
Dimensions 107.5 mm x 76 mm x 77.5 mm (W) X (H) X (D) (4.2" x 3.0" x 3.1")
Weight 310 g (0.7 lb) (without batteries/card)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OROBLIGATION ON THE PART OF THE MANUFACTURER.
227
Chapte
r 11
Glossary of terms
A (Aperture Priority) ModeYou set the aperture yourself andthe camera automatically variesthe shutter speed so that thepicture is taken with the bestexposure.
AE (Automatic Exposure)The camera's built-in exposuremeter automatically sets theexposure. The 3 AE modesavailable on this camera are Pmode, in which the camera selectsboth the aper ture and shutterspeed, A mode, in which the userselects the aper ture and thecamera sets the shutter speed,and S mode, in which the userselects the shutter speed and thecamera sets the aperture. In Mmode, the user selects both theaperture and the shutter speed.
ApertureThe adjustable lens opening whichcontrols the amount of light thatenters the camera. The larger theaperture, the shorter the depth off ield and the fuzzier thebackground. The smaller theaperture, the greater the depth off ield and the sharper thebackground. Aperture is measuredin f/stops. Larger aperture valuesindicate smaller apertures, andsmaller aperture values indicatelarger apertures.
BacklightA light source to illuminate themonitor from behind the screen.
CCD (Charge-coupled Device)This converts light passing throughthe lens into electrical signals. Onthis camera, light is picked up at3,34 million points and convertedinto RGB signals to build a singleimage.
Contrast Detection MethodThis is used to measure thedistance to the subject. Thecamera determines if the image isfocused by the level of contrast inthe subject.
Conventional PhotographThis refers to recording imagesusing silver halide (the method forrecording images in conventional,non-digital photography.) Thissystem is in contrast to still videoand digital photography.
DCF (Design rule for CameraFile system)A standard for image files by theJapan Electronics and InformationTechnology Industries Association(JEITA).
Digital ESP (Electro-SelectivePattern) light meteringThis determines the exposure bymetering and calculating the lightlevels in the center and other areasof the image separately.
228
Chapte
r 11
Glossary of terms (Cont.)
DPOF (Digital Print OrderFormat)This is for saving desired printsettings on digital cameras. Byentering which images to print andthe number of copies of each, theuser can automatically have thedesired images printed by a printeror print lab that supports the DPOFformat.
Eclipsing (Vignetting) This refers to when an objectobscures part of the field of viewso that the whole subject is notphotographed. Vignetting alsorefers to when the image seenthrough the viewfinder does notexactly match the image shotthrough the objective lens, so thephotographed image includesobjects not seen through theviewfinder. In addition, vignettingcan occur when an incorrect lenshood is used, causing shadowingto appear in the corners of theimage.
Effective Pixel Resolution The number of pixels used in theCCD to create the image.
EV (Exposure Value)A system for measuring exposure.EV0 is when the aperture is at F1and the shutter speed is 1 second.The EV then increases by 1 eachtime the aperture increases by oneF stop or the shutter speedincreases by one increment. EVcan also be used to indicatebrightness and ISO settings.
ExposureThe amount of l ight used tocapture an image. The exposure isdetermined by the time the shutteris open (shutter speed) and theamount of l ight that passesthrough the lens (aperture).
Gross Pixel ResolutionThe total number of pixels in aCCD. Not all pixels are used tocreate the image.
Flash BracketA mount used to attach an externalflash to the camera.
ISOA method for indicating film speedby the International Organizationfor Standardization (ISO) (e.g."ISO100"). Higher ISO valuesindicate greater sensitivity to light,so images can be exposed even inlow-light conditions.
229
Chapte
r 11
Glossary of terms (Cont.)
JPEG (Joint PhotographicExperts Group)A compression format for color stillimages. Photographs (images)shot using this camera arerecorded onto the SmartMediacard in JPEG format when theRecord mode is set to SHQ, HQ orSQ. By downloading these imagesto a personal computer, users canedit them using graphicsapplication software or view theimages using an Internet webbrowser.
M (Manual) ModeThe user sets both the apertureand shutter speed.
NTSC/PAL (National Televisionsystems Committee/PhaseAlternating Line)Kinds of TV video signal systems.NTSC is used in Japan, Nor thAmerica, Korea etc., while PAL isused in Europe, China etc.
P (Program) ModeAlso called Program AE mode. Thecamera automatically sets the bestshutter speed and aperture for theshot.
PAL (Phase Alternating Line)In Europe, PAL television signalsare normally used. North Americaand Japan use NTSC signals.
PixelsA pixel is the smallest unit (dot)used to make up an image. Clearlarge-sized printed images requiremillions of pixels.
Ring FlashA flash unit that uses a circularxenon fluorescent tube as its lightsource.
S (Shutter Priority) ModeAlso called Shutter Priority AEmode. The user selects the shutterspeed and the cameraautomatically varies the apertureso that the picture is taken with thebest exposure.
Synchro TerminalsTerminals on an external flash unitfor connecting it to the camera.
TFT (Thin-Film Transistor) ColorMonitorA color Monitor constructed usingthin-film technology.
TIFF (Tagged Image File Format)An uncompressed format used forsaving highly-detailed black &white or color image data. TIFFimage files can be handled bysoftware programs for scannersand graphics applications.
230
Chapte
r 11
Glossary of terms (Cont.)
TTL (Through-The-Lens) SystemTo help adjust exposure, a lightreceptor built into the cameradirectly measures the light passingthrough the lens.
TTL-AUTOFor use with an external flash.Light emitted by the flash ismeasured by the light receptor inthe camera as it passes throughthe lens. A signal is then sent toadjust the external flash's intensity.
231
Chapte
r 11
Index
AA (Aperture Priority shooting) ......58AA alkaline battery ........................22A/V OUT jack ................................11AC adapter ....................................22AE lock ..........................................89AE memory ..................................88AF AREA ......................................68AF MODE......................................66AF sequential shooting..................99AF target mark ........................63, 68ALL RESET ................................155All-frame erase............................150All-frame print reserve ................186Aperture ..................................58, 60Arrow pad......................................10AUTO (Full-auto shooting) ............54Auto bracketing ..........................100Auto focus ....................................63Auto white balance......................120Auto-flash ......................................78
BBattery ..........................................20Battery check ................................16Battery compartment cover ..........11Battery save ................................174Beep............................................169
CCARD SETUP ......................50, 151Camera movement warning ..........71Card ..............................................24Card cover ....................................11Close-up playback ......................139Cloudy day ..................................120Connector cover............................11Contrast ......................................124Custom button ............................157
DDate/time setting ..........................30DC-IN jack ....................................11Digital ESP metering ....................85Digital zoom ..................................77Diopter adjustment dial ..........10, 35Double-click playback..................128DPOF ..........................................184DRIVE ..........................................99
EEDIT............................................136ENGLISH ......................................34Erace ....................................41, 149Exposure compensation..............119
FFILE NAME ................................179File number ..........................15, 179Fill-in flash ....................................78Flash ....................................78, 195Flash charge ................................83Flash intensity control ..................84Flash mode ..................................78Flash off ........................................79Flash stand-by ........................13, 71Fluorescent light..........................120Focus ............................................63Focus lock ....................................65FORMAT ....................................151Frame number ..............................15Full-auto shooing ..........................54FULLTIME AF................................67FUNCTION..................................110
232
Chapte
r 11
Index (Cont.)
G, H, IGreen lamp ..................................62High quality ................................112High-speed sequential shooting....99Histogram....................................171HQ ..............................................112INDEX ........................................133Index display ..............................140Information display ......................167ISO..............................................117
LLandscape-Portrait shooting ........54Landscape-Scene shooting ..........54LANGUAGE ..................................33Lens ..............................................11Lithium battery pack......................22
MM (Manual shooting) ....................60m/ft ..............................................183Macro ............................................92Memory gauge ..............................16Metering ........................................85MODE MENU................................47Monitor ..................................10, 168Monitor adjustment......................168Monitor button ..............................10MOVIE PLAY ..............................130MOVIE PLAYBACK ....................132Movie record ................................55Multi-metering ..............................86My mode ....................................163
N, ONiCd battery ..................................20Night-Scene shooting....................55NiMH battery ................................22NOISE REDUCTION ..................126NTSC ..........................................182Number of storable still pictures....71OK/Menu button ............................10One-Touch white balance............121Optical zoom ................................76
PPAL..............................................182PANORAMA................................105Picture rotation ............................154PIXEL MAPPING ........................181Playback mode............................127Portrait shooting ............................54Preset white balance ..................120Print reserve................................184Protect ..................................40, 148PW ON/OFF................................175
Q, RQuality ........................................112Quick View ..................................128REC VIEW ..................................172Record mode ..............................112Recording sound ........103, 104, 147Red-eye reduction ........................78Remote control..............................97Resizing ......................................142Resolution ..................................113
233
Chapte
r 11
Index (Cont.)
SS (Shutter priority shooting) ..........59Saturation....................................125SCREEN SETUP ........................177Seconds remaining ......................74Self Portrait shooting ....................55Self-timer ......................................95Sequential shooting ......................99SHARPNESS..............................123Shooting mode..............................52Shortcut menu ......................45, 160SHQ ............................................112Shutter button..........................10, 62Shutter speed..........................59, 60Single-frame erase......................149Single-frame playback ................127Single-frame print reserve ..........188Single-frame/normal shooting ..........99SLEEP ........................................173Slide-show ..................................129Slow synchronization ....................79SmartMedia ..................................24Sound volume ............................146Speaker ................................11, 104Sports shooting ............................54Spot metering................................85SQ ..............................................112Strap..............................................18Strap eyelet ............................11, 18Sunny day ..................................120Super macro..................................94
TTelephoto ......................................76TIFF ............................................112Top menu ......................................45Trimming......................................143Tripod socket ................................11Tungsten light ..............................120TV playback ................................152
U, V, W, X, ZUSB connector ..............................11VIDEO OUT ................................182Viewfinder ........................12, 14, 35WB (White balance) ....................120Wide-angle ....................................76Write-protect seal ..........................24xD-Picture Card ............................24Zoom lever ..............................10, 76
Number2 IN 1 ..........................................1083:2 ..............................................1165-pin external flash socket ............11
How to use your PC to get the most from images taken with
your digital camera.
Thank you for purchasing an Olympus digital camera.This manual provides instructions on how to install the USB driver. To ensure correct installation, refer only to these installation procedures.
DIGITAL CAMERA
PERSONAL COMPUTER
DIGITAL CAMERA — PC CONNECTIONOPERATION MANUAL
Introduction
This manual explains in detail how to connect your Olympus digital camera to a computer. Read it carefully and keep it in a safe place for future reference.
About this manualThe information contained in this manual may be subject to change without notice. For the latest information on the product, please consult your local Olympus representative.The information contained in this manual has been compiled by taking all possible measures to ensure its accuracy. However, if you find any errors or incomplete information, please contact your local Olympus representative.It is prohibited by copyright laws to duplicate in part or in whole the information contained in this manual, except for personal use. Reproduction without permission of the copyright owner is prohibited.The PC screens shown in this manual may differ slightly from the actual displays on some PC models.
TrademarksMicrosoft and Windows are registered trademarks of Microsoft Corporation.Macintosh is a trademark of Apple Computer Inc.All other company and product names are registered trademarks and/or trademarks of their respective owners.
2
Macintosh
Window
sINDEX
Flowchart . . . . . . . . . . . . . . . . . . . . . . . . 4
Identifying the OS . . . . . . . . . . . . . . . . . 6
Windows (98/Me/2000/XP) . . . . . . . . . . . 8
Macintosh (OS 9/X). . . . . . . . . . . . . . . . 23
Downloading image files using other OS (For other OS users). . . . . . . . . . . . . . . 31
3
Flowchart
By connecting the camera to a computer with the provided USB cable, images on a card can be transferred to the computer. Some OS’s (operating systems) may need a special setup before connecting to the camera for the first time. Follow the chart below.
* Even if your computer has a USB connector, data transfer may not function correctly if you are using one of the operating systems listed below or if you have an add-on USB connector (extension card, etc.).Windows 95/NT 4.0Windows 98/98 SE upgrade from Windows 95Mac OS 8.6 or lower (except Mac OS 8.6 equipped with USB MASS Storage Support 1.3.5 installed at the factory)Data transfer is not guaranteed on a home-built PC system or PCs with no factory installed OS.
Identifying the OS (p.6)
Windows 98/98 SE (Second Edition) Windows Me/2000/XP MacOS 9.0 - 9.1/OS X (10.0)
* For OS 8.6, see below.
Installing the USB driver for Windows 98 (p.9)
Connecting the camera to the computer using the provided USB cable(Windows p.11, Mac p.24)
Confirming the computer recognizes the camera (p.14)
Downloading image files(Windows p.17, Mac p.26)
Disconnecting the USB cable(Windows p.20, Mac p.30)
4
Flowchart
• When connecting the camera to the computer, make sure that there is sufficient remaining battery power. When connected (transmitting) to the computer, the camera does not enter the sleep mode nor will the camera’s power turn off automatically. Depending on the camera model, when the battery power runs out or the internal temperature rises, the camera may stop operating automatically. This could cause the computer to malfunction, and any image data (file) being transmitted may be lost. Be careful when downloading files for a long period of time. Use the AC adapter (optional) when downloading files.
• If you connect or disconnect the AC adapter when the camera is connected to the computer and is running on battery power, it may result in the loss of image data on the card or cause a malfunction in the computer. Before connecting or disconnecting the AC adapter, disconnect the camera from the computer and make sure that the camera is turned off.
• To avoid computer malfunctions, do not turn off the camera when the camera is connected to a computer.
• If the camera is connected to the computer via a USB hub, operation may not be stable if there are any compatibility problems between the computer and the hub. In such cases, do not use the hub and connect the camera directly to the computer.
• You can view images using: graphics applications that support the JPEG file format (Paint Shop Pro, Photoshop, etc.); Internet browsers (Netscape Communicator, Microsoft Internet Explorer, etc.); CAMEDIA Master software; or other software. For details on using commercial graphics applications, refer to their instruction manuals.
• QuickTime is needed for playing back movies. QuickTime is included on the provided software CD.
• If you want to process images, make sure to download them to your computer first. Depending on the software, image files may be destroyed if the images are processed (rotated, etc.) while they are on the card.
5
Identifying the OS
Identify the OS on your computer before connecting the camera. How to identify the OS depends on the computer.
Windows
1 Double-click the “My Computer” icon on your desktop.When the “My computer” icon is not on your desktop, click “Control Panel” from the “Start” menu.
2 Double-click the “Control Panel” icon.
3 Double-click the “System” icon.
The way the file icons inside the folder appear may vary depending on your version of Windows. If you don’t see the icon you are looking for, click on “view all Control Panel options” on the left of the window.
6
Identifying the OS
4 A System Properties window will appear. Note and record the “System:” information.Confirm that your system is Windows 98, 98 SE, Me, 2000 Professional or Windows XP, then press “OK” to close the window.
If your OS is Windows 98/98 SE, proceed to “Installing the USB driver for Windows 98” ( p.9).Users running Windows Me/2000/XP p.11Users running other OS p.31
Mac OS (Macintosh)
Select “About This Computer” from the Apple menu on the menu bar. A window appears with the name of the computer’s OS.Confirm that the OS is OS 9.0-9.1 or OS X.
Users running Mac OS 9/X p.23Users running other OS p.31
7
Win
dow
sWindowsWindowsWindowsWindows
Using Windows 98/Me/2000/XPUsing Windows 98/Me/2000/XPUsing Windows 98/Me/2000/XPUsing Windows 98/Me/2000/XP
Your computer is turned on and Windows is running. If you are running any applications, quit them all.You are recommended to power the camera using the optional AC adapter. If the battery power runs out while the computer is accessing the card in the camera, the camera will turn off in the middle of the operation and this could destroy image files (data). If you are using batteries, make sure that there is sufficient remaining battery power.
Installing the USB driver for Windows 98 (When using Windows 98/98 SE) ....................................................................................... 9Connecting the camera to the computer ................................. 11Confirming the computer recognizes the camera .................. 14Confirming the USB driver is installed .................................... 15Downloading images to your computer................................... 17Disconnecting the camera from your computer ..................... 20
Make sure that:
8
Window
sInstalling the USB driver for Windows 98(When using Windows 98/98 SE)
If your OS is Windows 98/98 SE, you must install the USB driver. Follow the instructions below to install the USB driver in your computer. Once it is fully installed, you do not need to repeat the procedure again. If your OS is Windows Me/2000/XP, skip the procedure below as the USB driver will be automatically installed. Proceed to “Connecting the camera to the computer” ( p.11).
1 Insert the provided software CD into your CD-ROM drive.
2 The Olympus Windows Installer should automatically launch. Click “USB driver for Windows 98”.
If the installer is not automatically launched, select “Run..” on the “Start” menu and then execute “(drive letter):/ Information.exe”.
The drive letter of the CD-ROM varies depending on the computer.To identify the drive letter, double-click “My Computer” on the desktop.
9
Installing the USB driver for Windows 98 (When using Windows 98/98 SE)
1
Win
dow
s
3 Click “Continue”. The installation of the USB driver will start.
4 Click “OK” to restart your computer and the installation is complete.
5 When the computer has restarted, installation is complete. If the Olympus Windows Installer screen appears, click “Close” and remove the CD-ROM from the CD-ROM drive.
0
Window
sConnecting the camera to the computer
Users running Windows 98/98SE need to install the USB drive before connecting the camera to your computer for the first time. ( p.9)
1 Insert the marked end of the provided USB cable into the USB port on your computer as shown below.
2 After making sure that the camera is turned off, connect the end of the USB cable to the USB connector on the camera.The location of the USB connector or multi connector varies depending on the camera model. Refer to the camera manual for details.
The location of the USB port varies depending on the computer. For details, refer to your computer's manual.
Look for this mark.
USB port
Terminal
Camera with a USB connector
USB port
Computer
USB connector
USB cableSmaller terminalRectangular terminal
Camera with a multi connector
USB cable
Smaller terminal
USB port
Computer
Rectangular terminal
Camera’s multi connector (USB, A/V OUT)
11
Connecting the camera to the computer
1
Win
dow
s
3 Turn the camera on.Camera with a lens barrierThe power turns on automatically, with the exception of some models which require you to press the (monitor) button.When the camera is turned on, the lamp on the right of the viewfinder lights up.
Camera with a modeSet the mode dial to . (If the camera has a power switch as well as a mode dial, turn the power switch to ON.)
Camera with a mode (Camera setup/connection mode) Set the mode dial to to turn the camera on.
Lens barrier
Lamp
(monitor) button
Mode dial
Mode dial
Power switch
2
Connecting the camera to the computer
Windows
4 The computer recognizes the camera as a new device.When you connect the camera to the computer for the first time, the computer automatically recognizes the camera. Click “OK” when the message saying that the installation is completed appears. The computer recognizes the camera as a “Removable Disk”.
Windows XPYou can download image files from the camera easily.Select “Copy pictures to folder on my computer using Microsoft Scanner and Camera Wizard”, then follow the on-screen instructions. You may also select “take no action” to bypass the Microsoft Scanner and Camera Wizard. You may then use a more advanced image viewing/editing program such as Olympus CAMEDIA Master software. For detailed instructions on downloading, refer to the CAMEDIA Master software user’s guide.
When the camera is connected to the computer, none of the camera buttons are functional.
13
1
Win
dow
sConfirming the computer recognizes the camera
1 Double-click the “My Computer” icon on the desktop.For users running Windows XP, click “My Computer” from the “Start” menu.
2 Make sure the “Removable Disk” icon appears in the window.There may already be other “Removable Disk” icons for other devices, such as a removable media drive or USB SmartMedia Reader/Writer. In this case, the digital camera is recognized as another “Removable Disk”.If you cannot find the icon, the camera and computer are not connected properly. Turn the camera off, disconnect the camera from the computer and connect again, or proceed to “Confirming the USB driver is installed” ( p.15) to make sure that the USB driver is fully installed.
4
Window
sConfirming the USB driver is installed
If the computer does not recognize the camera as a Removable Disk, follow the procedure below to check whether the USB driver has been fully installed.
1 Open “My Computer” and double-click the “Control Panel” icon.For users running Windows XP, open “Control Panel” from the “Start” menu.
2 Double-click the “System” icon.
3 The System window will appear. Click the “Device Manager” tab.
15
Confirming the USB driver is installed
1
Win
dow
s
4 Confirm that “OLYMPUS Digital Camera” is in the “Universal Serial Bus Controller” category.If you cannot find the “OLYMPUS Digital Camera”, turn the camera off, disconnect the camera from the computer and start again.Users running Windows 98/98 SE start again from “Confirming the USB driver is installed”, and Users running Window Me/2000/XP start from “Connecting the camera to the computer”.
If the USB driver was successfully installed, you can find the following in the “Device Manager”.
– the name of the camera you have connected listed under “Disk drives”– “OLYMPUS Digital Camera” listed as one of the items in the “Universal
Serial Bus Controller” category
6
Window
sDownloading images to your computer
1 Double-click the “My Computer” icon on the desktop.For users running Windows XP, click “Control Panel” from the “Start” menu.
2 Double-click the “Removable Disk” icon.A new “Removable Disk” icon appears when the camera is connected to the computer, as the digital camera is recognized as a “Removable Disk”.
3 Double-click the “Dcim” folder.
If an error message appears when you double-click the icon, there may be a problem with one of the following:
the camera’s power source (the AC adapter is not properly connected or the battery power is low)Make sure that the AC adapter is correctly connected or that the batteries are not running low.the card (there is no card in the camera or there is a problem with the card)Check that you can play back pictures stored on the card on the monitor of your digital camera.
17
Downloading images to your computer
1
Win
dow
s
4 Double-click the “100olymp” folder.Image files (JPEG files) with files names such as “P1010001.jpg” are displayed.
5 Double-click the “My Documents” icon on the desktop.If you cannot find the icon on the desktop, select “Explorer” on the Start menu and double-click the “My Documents” icon.
• The camera automatically assigns folder names and file names according to the following rules.
• Serial numbers of image files run from 0001 to 9999.• Serial numbers of folders run from 100 to 999.• When file number 9999 is reached, a new folder is created and assigned
the next number.• Months January through September are expressed by the numbers 1
through 9, October by the letter A, November by B and December by C.
Folder name(Example)
File name(Example)
Serial number Month / Day / Serial number
8
Downloading images to your computer
Windows
The “My Documents” window is displayed.
6 Drag & drop the image you want to save in the computer (in this case, P1010012.jpg) to the “My Documents” window.The image is saved in the computer (in My Documents folder).• To select all files, choose Edit > Select all.
When the image file has been downloaded to the computer, you can view images by double-clicking the image files downloaded to your computer. The files will be opened in the default image viewer of the operating system. If you want to view the image a different size or process it, you will need to open the image with software that supports JPEG or TIFF images files, such as Paint Shop Pro, Photoshop or CAMEDIA Master software.
The lamp on the right of the viewfinder or the card access lamp blinks while the image is being copied. Never open the card cover on the camera, load or remove the batteries, or connect or disconnect the AC adapter while the lamp is blinking as the image files may be destroyed.
19
2
Win
dow
sDisconnecting the camera from your computer
If your OS is Windows Me/2000, proceed to “Windows Me/2000/XP” ( p.21).
Windows 98
1 Make sure that the lamp on the right of the viewfinder or the card access lamp is not blinking.Some camera models have either a lamp on the right of the viewfinder or a card access lamp, and the location varies depending on the model. Refer to your camera’s reference manual.
2 Double-click the “My Computer” icon and right-click the “Removable Disk” to display the menu.
3 Click “Eject” on the menu.
Lamp
0
Disconnecting the camera from your computer
Windows
4 Make sure that the lamp on the right of the viewfinder or the card access lamp is not blinking.
5 Remove the USB cable from the camera.
6 Remove the USB cable from your computer.
Windows Me/2000/XP
1 Make sure that the lamp on the right of the viewfinder or the card access lamp is not blinking.Some camera models have either a lamp on the right of the viewfinder or a card access lamp, and the location varies depending on the model. Refer to your camera's reference manual.
Lamp
Lamp
21
Disconnecting the camera from your computer
2
Win
dow
s
2 Click the “Unplug or Eject Hardware” icon on the task bar.The message saying that the drive has been stopped appears.
3 Click on the message.The “Unplug or Eject Hardware” window appears.
4 When a message appears, click “OK”.
5 Remove the USB cable from the camera.
6 Remove the USB cable from your computer.
If the window returns the following message when you click “Unplug or Eject Hardware”, first make sure that no image data is being downloaded from the camera, and then remove the USB cable.
2
Macintosh
MacintoshMacintoshMacintoshMacintosh
Using Mac OS (9/X)Using Mac OS (9/X)Using Mac OS (9/X)Using Mac OS (9/X)
Your computer is turned on and Mac OS is running.If you are running any applications, quit them all.You are recommended to power the camera using the optional AC adapter. If the battery power runs out while the computer is accessing the card in the camera, the camera will turn off in the middle of the operation and this could destroy image files (data). If you are using batteries, make sure that there is sufficient remaining battery power.
If you are running Mac OS X, the connection to the computer and downloading the image data are verified. Restrictions such as the following may occur due to the OS.
The image file properties are not displayed correctly.Images in the camera cannot be opened without first downloading them. etc.
For more details, visit the Olympus web site.
Connecting the camera to the computer ................................. 24Downloading images to your computer................................... 26Disconnecting the camera from your computer ..................... 30
Make sure that:
23
2
Mac
into
shConnecting the camera to the computer
1 Insert the marked end of the USB cable into the USB port on your computer as shown below.
2 After making sure that the camera is turned off, connect the end of the USB cable to the USB connector on the camera.The location of the USB connector or multi connector varies depending on the camera model. Refer to the camera manual for details.
The location of the USB port varies depending on the computer. For details, refer to your computer's manual.
Look for this mark.
Terminal
USB port
Camera with a USB connector
USB port
Computer
USB connector
USB cableSmaller terminalRectangular terminal
Camera with a multi connector
USB cable
Smaller terminal
USB port
Computer
Rectangular terminal
Camera’s multi connector (USB, A/V OUT)
4
Connecting the camera to the computer
Macintosh
3 Turn the camera on.Camera with a lens barrierThe power turns on automatically, with the exception of some models which require you to press the (monitor) button.When the camera is turned on, the green lamp on the right of the viewfinder lights up.
Camera with a modeSet the mode dial to . (If the camera has a power switch as well as a mode dial, turn the power switch to ON.)
Camera with a mode (Camera setup/connection mode) Set the mode dial to to turn the camera on.
4 The computer recognizes the camera as a new device.The computer recognizes the camera automatically and an “Untitled” icon appears on the desktop.If you cannot find this icon, turn off the camera and connect again.
Mac OS XWhen the computer has recognized the camera, the Apple Image Capture software automatically launches. p.29
When the camera is connected to the computer, none of the camera buttons are functional.
Lens barrier
Lamp
(monitor) button
Mode dial
Mode dial
Power switch
25
2
Mac
into
shDownloading images to your computer
Mac OS 9
You can download images from the camera and save them in your computer (in this case, in the Hard Disk).
1 Double-click the “Untitled” icon displayed on the desktop when the camera is connected to the computer.
2 Double-click the “Dcim” folder.
3 Double-click the “100OLYMP” folder.
If you cannot find this icon, or if an error message appears when you double-click the icon, there may be a problem with one of the following:
the camera’s power source (the AC adapter is not properly connected or the battery power is low)the card (there is no card in the camera or there is a problem with the card)Check that you can play back pictures on the monitor of your camera.the USB cable (the camera is not properly connected to the computer by the USB cable).Apple “File Exchange” extension is not enabled.• Please refer to your Apple operating system manual for instructions on
how to enable this extension.
6
Downloading images to your computer
Macintosh
Image files (JPEG files) with files names such as “P1010001.JPG” are displayed.
4 Double-click the “Macintosh HD” icon on the desktop.
• The camera automatically assigns folder names and file names according to the following rules.
• Serial numbers of image files run from 0001 to 9999.• Serial numbers of folders run from 100 to 999.• When file number 9999 is reached, a new folder is created and assigned
the next number.• Months January through September are expressed by the numbers 1
through 9, October by the letter A, November by B and December by C.
Folder name(Example)
File name(Example)
Serial number Month / Day / Serial number
27
Downloading images to your computer
2
Mac
into
sh
The “Hard Disk” window is displayed.
5 Drag & drop the image you want to save in the computer (in this case, P1010012.JPG) to the “Hard Disk” window.The image is saved in the computer (in the Hard disk).• To select all images,
click Edit > Select all.
When the image file has been copied to the computer, you can view images by double-clicking the image files in the “Hard Disk” folder. The files will be opened in the default image viewer of the operating system. If you want to view the image a different size or process it, you will need to open the image with software that supports JPEG or TIFF images files, such as Paint Shop Pro, Photoshop or CAMEDIA Master software.
The lamp on the right of the viewfinder or the card access lamp blinks while the image is being copied. Never open the card cover on the camera, load or remove the batteries, or connect or disconnect the AC adapter while the lamp is blinking as the image files may be destroyed.
8
Downloading images to your computer
Macintosh
Mac OS X
Malfunctions such as the following may occur due to the OS.• If the camera is not connected correctly, a malfunction occurs in the
computer.• Date and time information of image files is not accurately displayed.• If the card cover of the camera is opened while connecting to the computer,
the “untitled” icon does not disappear from the desktop. etc.
When the computer has recognized the camera, the Apple Image Capture software dialog appears.
1 From the “Download To” menu, select a destination folder.
2 To download all images, click “Download All”.To selectively download images, click “Download Some” and highlight the desired images.The images are transferred from the camera to your computer.
If you are operating Mac OS X and you want to download images using the same procedure as for Mac OS 9, select “File > Close” and exit the Apple Image Capture software. At this time, the camera is indicated as “unlabeled”.
If you use the Apple Image Capture software, images downloaded to your computer and transferred back to a card may not play back on the camera or may have other problems.
29
3
Mac
into
shDisconnecting the camera from your computer
1 Make sure that the lamp on the right of the viewfinder or the card access lamp is not blinking.
2 Drag the “untitled” icon on the desktop to “Trash”.
3 Make sure that the lamp on the right of the viewfinder or the card access lamp is not blinking.
4 Remove the USB cable from the camera.
5 Remove the USB cable from your computer.
Lamp
Lamp
0
Downloading image files using other OS(For other OS users)
Users running other OS cannot connect the camera directly to a computer. Windows 95 Windows NT Mac OS before OS 9You can download images directly to your computer using an optional floppy disk adapter or PC card adapter.
Does your computer have a USB interface?Is there a port marked on your computer?
Does your computer have a built-in PC card slot?
Consult your nearest Olympus representative.
Is your OS one of the following?•Windows 98•Windows 2000•Windows Me•Windows XP•Mac OS 9/X
YesNo
No
Yes
Connect the camera directly to your computer using the provided USB cable.
Use the optional USB SmartMedia reader/writer.*Certain card readers may not be compatible with Mac OS X.Check the Olympus website for the most up-to-date compatibility information.
Use the optional PC card adapter.
*Not supported by Windows NT4.0 or lower
Does your computer have a built-in floppy disk drive?
No
Yes
Use the optional FlashPath floppy disk adapter.
No
Yes
31
http://www.olympus.com/
© 2002 OLYMPUS OPTICAL CO., LTD.
OLYMPUS OPTICAL CO., LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan
Customer support (Japanese language only): Tel. 0426-42-7499 Tokyo
OLYMPUS AMERICA INC.Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
Technical Support (USA) 24/7 online automated help: http://support.olympusamerica.com/Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ETE-Mail: [email protected] software updates can be obtained at: http://olympus.com/digital/
OLYMPUS OPTICAL CO. (EUROPA) GMBH.Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany
Tel. 040-237730 Letters: Postfach 10 49 08, 20034 Hamburg, Germany
Hotline Numbers for customers in Europe:Tel. 01805-67 10 83 for GermanyTel. 00800-67 10 83 00 for Austria, Belgium, Denmark, France,
Netherlands, Norway, Sweden, Switzerland, United Kingdom
Tel. +49 180 5-67 10 83 for Finland, Italy, Luxembourg, Portugal, Spain, Czech Republic
Tel. +49 40-237 73 899 for Greece, Croatia, Hungary, and the rest of Europe
Our Hotline is available from 9 am to 6 pm (Monday to Friday)E-Mail: [email protected]
VT395002