digital data transmission,line coding and pulse shaping
TRANSCRIPT
![Page 1: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/1.jpg)
DIGITAL DATA TRANSMISSION,LINE CODING AND PULSE SHAPING
Made By: AAYUSH KUMARRoll No.: 1209731002
![Page 2: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/2.jpg)
What is Digital Data Transmission?• A mode of transmission in which all information to
be transferred, such as voice, image or text data, is converted in the digital (mainly binary numbers) before transmission. At the end point, binary code is converted back into original format. • Digital transmission can deliver a signal, free of
ghosts, interference, and picture noise. It provides sharper, clearer and faster transmission, using less bandwidth to transmit more information than analog.
![Page 3: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/3.jpg)
Transmission modes
![Page 4: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/4.jpg)
![Page 5: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/5.jpg)
Parallel Transmission• In Parallel transmission, by grouping,
we can send n data bits at a time instead of 1.• Its advantage over serial transmission
is in terms of speed.
![Page 6: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/6.jpg)
Block diagram of parallel transmission
![Page 7: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/7.jpg)
Serial transmission • In Serial transmission, one bit follows
another• It advantage over parallel transmission is
that it reduces cost of transmission. But communication with device is parallel hence conversion devices are required at the interface between the sender and the line (p to S) and between the line and receiver (S to P)
![Page 8: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/8.jpg)
Block diagram of serial transmission
![Page 9: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/9.jpg)
Asynchronous, synchronous and isochronous• In telecommunications, asynchronous communication
is transmission of data, generally without the use of an external clock signal, where data can be transmitted intermittently rather than in a steady stream
• The transmission of data in which both stations are synchronized by a clock is known as synchronous transmission of data. Codes are sent from the transmitting station to the receiving station to establish the synchronization, and the data are then transmitted in continuous streams.
• Isochronous transmission transmits asynchronous data over a synchronous data link so that individual characters are only separated by a whole number of bit-length intervals
![Page 10: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/10.jpg)
Line Coding
• Converting a string of 1’s and 0’s (digital data) into a sequence of signals that denote the 1’s and 0’s.
• For example a high voltage level (+V) could represent a “1” and a low voltage level (0 or -V) could represent a “0”.
![Page 11: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/11.jpg)
Line coding and decoding
![Page 12: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/12.jpg)
Relationship between data rate and signal rate• The data rate defines the number of bits sent per
sec - bps. It is often referred to the bit rate.• The signal rate is the number of signal elements
sent in a second and is measured in bauds. It is also referred to as the modulation rate.• Goal is to increase the data rate whilst reducing
the baud rate.
![Page 13: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/13.jpg)
Signal element versus data element
![Page 14: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/14.jpg)
Line coding schemes
![Page 15: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/15.jpg)
Unipolar NRZ
• All signal levels are on one side of the time axis - either above or below• NRZ - Non Return to Zero scheme is an example of
this code. The signal level does not return to zero during a symbol transmission.• Scheme is prone to baseline wandering and DC
components. It has no synchronization or any error detection. It is simple but costly in power consumption.
![Page 16: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/16.jpg)
Unipolar NRZ scheme
![Page 17: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/17.jpg)
Unipolar RZ
• In unipolar RZ form, the waveform has zero value when symbol ‘0’ is transmitted and waveform has ‘v’ volts when ‘1’ is transmitted.
• The ‘v’ volts is present for half time period and for the remaining time period the waveform returns to zero.
![Page 18: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/18.jpg)
Polar - NRZ
• The voltages are on both sides of the time axis.• Polar NRZ scheme can be implemented with two
voltages. E.g. +V for 1 and -V for 0.• There are two versions: • NZR - Level (NRZ-L) - positive voltage for one symbol and
negative for the other• NRZ - Inversion (NRZ-I) - the change or lack of change in
polarity determines the value of a symbol. E.g. a “1” symbol inverts the polarity a “0” does not.
![Page 19: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/19.jpg)
4.19
Polar NRZ
![Page 20: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/20.jpg)
Polar - RZ• The Return to Zero (RZ) scheme uses three
voltage values. +, 0, -. • Each symbol has a transition in the middle. Either
from high to zero or from low to zero.• This scheme has more signal transitions (two per
symbol) and therefore requires a wider bandwidth.• No DC components or baseline wandering.• Self synchronization - transition indicates symbol
value.• More complex as it uses three voltage level. It has
no error detection capability.
![Page 21: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/21.jpg)
Polar RZ scheme
![Page 22: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/22.jpg)
Split-Phase Manchester
• In manchestere format,if symbol 1 is to be transmitted,Then a positive half interval pulse is followed by a negative half interval pulse.
• If symbol zero is to be transmitted,then a negative half interval pulse is followed by a positive half interval pulse.
• Hence for any symbol the pulse takes +ve as weel as –ve values.
![Page 23: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/23.jpg)
Bipolar - AMI and Pseudoternary• Code uses 3 voltage levels: - +, 0, -, to represent
the symbols (note not transitions to zero as in RZ).• Voltage level for one symbol is at “0” and the
other alternates between + & -.• Bipolar Alternate Mark Inversion (AMI) - the “0”
symbol is represented by zero voltage and the “1” symbol alternates between +V and -V.• Pseudoternary is the reverse of AMI.
![Page 24: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/24.jpg)
Bipolar schemes: AMI and pseudoternary
![Page 25: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/25.jpg)
Bipolar Characteristics
• It is a better alternative to NRZ.• Has no DC component or baseline wandering.• Has no self synchronization because long runs of “0”s results in
no signal transitions.• No error detection.
![Page 26: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/26.jpg)
Pulse Shaping
![Page 27: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/27.jpg)
• In electronics and telecommunications, pulse shaping is the process of changing the waveform of transmitted pulses. Its purpose is to make the transmitted signal better suited to its purpose or the communication channel, typically by limiting the effective bandwidth of the transmission.
• By filtering the transmitted pulses this way, the intersymbol interference caused by the channel can be kept in control.
• Typically pulse shaping occurs after line coding and modulation.
![Page 28: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/28.jpg)
Need for Pulse Shaping
In communications systems, two important requirements of a wireless communications channel demand the use of a pulse shaping filter.
1) generating bandlimited channels
2) reducing inter symbol interference (ISI) from multi-path signal reflections.
![Page 29: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/29.jpg)
Time vs. Frequency Domain for a Sinc Pulse
The sinc pulse,above , meets both of these requirements because it efficiently utilizes the frequency domain to utilize a smaller portion of the frequency domain, and because of the windowing affect that it has on each symbol period of a modulated signal.
![Page 30: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/30.jpg)
Any Questions ???
![Page 31: Digital data transmission,line coding and pulse shaping](https://reader035.vdocument.in/reader035/viewer/2022062316/5870bdff1a28ab0b4a8b672f/html5/thumbnails/31.jpg)
THANK YOU....!!