digital elite series issued sept. 2018 † index no. aym/86

Auto-darkening lens is warranted for three years. International Headquarters Miller Electric Mfg. LLC An Illinois Tool Works Company 1635 W. Spencer Street Appleton, WI 54914 USA TEL. : +1 920 735 4554 FAX : +1 920 735 4125 MillerWelds.com ITW Welding – BV Edisonstraat 10 P.O. Box 1551 NL-3261 LD Oud-Beijerland, Netherlands TEL: +31 (0) 186 641 444 FAX: +31 (0) 186 640 880 Issued Sept. 2018 • Index No. AYM/86.0 Shades Weld: 8 – 13 Cut: 5 – 8 Sensors 4 TIG Rating 5 amps and below Switching Speed 1/20,000 second Weight 510 g (18 oz.) Viewing Area 59.48 sq. cm (9.22 sq. in.) Operating Modes Weld, cut, grind and X-Mode ™ ClearLight ™ Lens Technology optimizes contrast and clarity in welding and light states. 1/1/1/2 optical clarity rating allows for a lighter light state while not welding — keeping the helmet down — maximizing safety and productivity. Four arc sensors and four modes: weld, cut, grind and X-Mode. X-Mode prevents sunlight from darkening the lens before welding starts and low-amperage lens opening from obstructed sensors. Headgear provides extensive adjustability settings and a pivoting top for better fit and comfort. Digital controls easily allow welder to adjust shade, delay and sensitivity. Auto-on/off power control triggers lens at the strike of an arc. Meets ANSI Z87.1+, CSA and CE standards. Digital Elite ™ Series Auto-Darkening Welding Helmets Quick Specs Welding Safety and Health ClearLight lens technology Traditional lens technology Optional helmet lighting accessory kit includes two lights (one for each side) and all required mounting hardware.

Upload: others

Post on 13-Nov-2021

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Digital Elite Series Issued Sept. 2018 † Index No. AYM/86

Auto-darkening lens is warranted for three years.

International HeadquartersMiller Electric Mfg. LLCAn Illinois Tool Works Company1635 W. Spencer StreetAppleton, WI 54914 USATEL. : +1 920 735 4554FAX : +1 920 735 4125MillerWelds.com

ITW Welding – BVEdisonstraat 10P.O. Box 1551NL-3261 LD Oud-Beijerland, NetherlandsTEL: +31 (0) 186 641 444FAX: +31 (0) 186 640 880

Issued Sept. 2018 • Index No. AYM/86.0

ShadesWeld: 8 –13Cut: 5 – 8

Sensors 4

TIG Rating 5 amps and below

Switching Speed 1/20,000 second

Weight 510 g (18 oz.)

Viewing Area59.48 sq. cm (9.22 sq. in.)

Operating ModesWeld, cut, grind and X-Mode™

ClearLight ™ LensTechnology optimizescontrast and clarity in welding and light states.1/1/1/2 optical clarityrating allows for a lighter light state while not welding — keeping the helmet down —maximizing safety and productivity.

Four arc sensors and four modes: weld, cut, grind and X-Mode. X-Mode prevents sunlight from darkening thelens before welding starts and low-amperage lens openingfrom obstructed sensors.

Headgear provides extensive adjustability settings and a pivoting top for better fit and comfort.

Digital controls easily allow welder to adjustshade, delay and sensitivity.

Auto-on/off power control triggers lens at the strike of an arc.

Meets ANSI Z87.1+, CSA and CE standards.

Digital Elite™ SeriesAuto-Darkening Welding Helmets

QuickSpecs

Welding Safetyand Health

ClearLight lens technology

Traditional lens technology

Optional helmet lightingaccessory kit includes twolights (one for each side) and all required mounting hardware.