digital sound pressure level meter · click “ pc software setting ” to setup the low/high db...
TRANSCRIPT
54-2222-01A 1308Specifications are subject to change without notice.© 2013 Bogen Communications, Inc.
SPLMD I G I T A L S O U N D P R E S S U R E
L E V E L M E T E R
SoundLAB Software
I N S T A L L A T I O N &I N S T R U C T I O N M A N U A L
Download Software from the Bogen website:www.bogen.com/software
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 1
Installing and Using SoundLAB Software
Installing SoundLAB Software ..........................1-4
Software Instructions ............................................5Software Control Panel, File Menu, Option Bar
Software Command Descriptions ........................5
Software Tool Bar ..................................................6Tool Bar Functions
PC Connection .......................................................6
System Setup .........................................................7
SPL Unit Setting.....................................................7
PC Software Setting ..............................................8
Real-Time Measurement........................................8
Measurement Bar Instructions .............................9
Import Data.............................................................9
T A B L E O F C O N T E N T S
Minimum requirements forconnection with a PC:
• CPU: Pentium 600 MHz or higher• One USB interface port• Resolution of 800 x 600 (True Color)• 8 MB available memory• 50 MB available disk memory• Operating system:
Microsoft Windows XP/ Windows7
PC Requirements
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 2
1
Installing SoundLAB Software
You can download the SoundLAB software from the Bogen website at:www.bogen.com/software. Install the driver file and double-click theSetup.exe program icon to enter the program installation contact interface.Click NEXT to continue.
Click BROWSE to change the installation folder. Click NEXT to continue.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 3
2
Installing SoundLAB Software (contʼd)
When this interface appears on screen, click NEXT to enter next step.
Select “Create A Desktop Icon” if you want a desktop icon. Then clickNEXT to enter the next step.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 4
3
Click INSTALL to begin the installation.
Installing SoundLAB Software (contʼd)
When the interface displays, make sure to select “Setupbde” (databaseaccess engine). If it is the first time installing the software on the PC, clickFINISH to install the database access engine. If this is not the first instal-lation of the software on the PC, DO NOT select “Setupbde”.
To begin using SoundLab, select “Run SoundLab”. Click FINISH to com-plete the installation.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 5
4
Installing SoundLAB Software (contʼd)
If this is the first time installing the software on the PC, you must install thedatabase. When you see the screen shown below, click INSTALL to startthe installation process.
When you see the screen shown in the Figure below, click FINISH to com-plete the installation process.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 6
5
Software Instructions
Software Control Panel
Software Command Descriptions
1. Menu Bar2. Tool Bar 3. Status Bar
You can check the connection status of the SPLMto the PC by looking at the on-screen Status Barloacted at the bottom of the screen.
Connect OK – indicates the connection is active Disconnect – indicates the SPLM failed to connect
File Menu Option Menu
Real-Time Data Measurement: The Measured Data will be displayed on your computer screen
Open Measurement Data File in SoundLab format
Save Real-time Measurement Data
Download the Measurement Data
Export the Measurement Data to Excel
Printer Setting
Print Data Sheet
System Setting
Language selection of Software Contact Interface
Real-Time Measure
Open
Save
Import Data
Export Data
Printer Setup
Print Data Sheet
System Setup
Language
COMMAND FUNCTION
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 7
6
Software Tool Bar
PC Connection
Tool Bar Functions
1. Insert one end of the USB cableinto the USB jack on the side ofthe SPLM.
2. Plug the other end of the USBcable into the USB interface porton the PC.
NOTE: Once the connection is made, a USB icon appears on the LCD of the SPLM indicatinga successful connection. If the icon does not appear, the connection is not complete.
When connected to the PC, the PC supplies power to the SPLM (so theAA batteries are not necessary and will not be used when the unit isconnected to the PC). When the connection to the PC is ended, the SPLMwill turn off automatically unless batteries are in the SPLM.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 8
7
System Setup
SPL Unit Setting
Click OPTION > SYSTEM SETUP or click to enter the SYSTEM OPTION.The default setup is “SPL Unit Setting”. Enter the company name if needed,then click “OK” or “APPLY” to confirm the setting.
Click “SPL Unit Setting” to setup the following items: measurement range,max. work mode, sample speed, and weight. Then click “OK” or “Apply”to confirm.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 9
8
PC Software Setting
Click “PC Software Setting” to setup the Low/High dB Alarm and the Alarmsound ON/OFF. Then click “OK” or “Apply” to confirm.
Click OPTION > SYSTEM SETUP
Real-Time Measurement
Click Real-Time Measure in File Menu Bar in the Tool column to enter thescreen as shown below.
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 10
9
BUTTONStart Real-Time Measurement
Stop Real-Time Measurement
Clear all the Measurement Data
Click to Store Real-Time Measurement Data,Input file name in Popup Window, Click to Save the Document
Print Graph
Zoom In
Zoom Out
Reset Zoom, Resume to Defaulted Value
Move Graph to Left or Right
FUNCTION
Measurement Bar Instructions
Click the Import Data in File Menu Bar or Import Data Button on ToolColumn to display the following screen:
Click “Import” to import the data stored in the SPLM to display as a graph.
Import Data
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 11
50 Spring Street, Ramsey, NJ 07446, U.S.A.Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com
10
54-2222-01A_SoftwareInstall2_Layout 1 8/28/13 11:28 AM Page 12