digital - tributaries cable

4
www.tributariescable.com AC100 Coaxial / Toslink Audio Converter DIGITAL AC100_MANUAL.indd 1 10/26/07 8:34:20 AM

Upload: others

Post on 11-Feb-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: DIGITAL - Tributaries Cable

www.tributariescable.com

AC100Coaxial / Toslink Audio Converter

DIGITAL

AC100_MANUAL.indd 1 10/26/07 8:34:20 AM

Page 2: DIGITAL - Tributaries Cable

AC100

Introduction

Tributaries AC100 is a compact and convenient Coaxial / Toslink digital audio converter. It accepts a S/PDIF digital audio signal input through either Coaxial cable or Toslink cable, and passes the signal (as is) to both its Coaxial and Toslink output. With its built-in amplification feature, the AC100 can also serve as a repeater and extend the transferring distance.

Features

1. Supports two-way conversion: Coaxial to Toslink or Toslink to Coaxial.

2. Supports input audio signals from 2 channels up to 5.1 channels; the output signal follows the input.

3. Supports amplification of S/PDIF audio and extends the transferring distance, through Coaxial and/or Toslink cables.

4. Select from Coaxial or Toslink input, and send the S/PDIF audio signal to both Coaxial and Toslink output simultaneously.

5. Compact size and easy to install.

Package Contents

1. Tributaries® AC100 Coaxial / Toslink Audio Converter

2. 7.5VDC power supply adaptor

3. Operation Manual

Coaxial / Toslink Audio Converter

DIGITAL

AC100_MANUAL.indd 2 10/26/07 8:34:24 AM

Page 3: DIGITAL - Tributaries Cable

DC 7.5VTosCoaxial

1 2

1

2

1

Upper Cover

Switcher Panel

1

Input Panel

Output Panel

1 2

1 2

1

2

1

2Out Toslink Coax

In Coax Toslink

Operational Controls and Functions

Coaxial Input: Connect to the output port of your S/PDIF audio source such as a DVD player or amplifier, using Coaxial cable.

Toslink Input: Connect to the output port of your S/PDIF audio source such as a DVD player or amplifier, using Toslink (fiber optic cable).

Toslink Output: Connect to the input port of your S/PDIF audio equipment such as an amplifier, using Toslink (fiber optic cable).

Coaxial Output: Connect to the input port of your S/PDIF audio equipment such as an amplifier, using Coaxial cable.

Input Selection: Use the mini switch to select input from Coaxial or Toslink.

Power: Plug the power supply into AC100 unit and connect the adaptor to AC wall outlet.

Power LED: The LED will illuminate when the power supply is connected.

Coax to Toslink 2 way Converter

& Repeater

AC100_MANUAL.indd 3 10/26/07 8:34:25 AM

Page 4: DIGITAL - Tributaries Cable

©2007 Gordon J. Gow Technologies, Inc. All rights reserved.

TRIBUTARIES® is a registered trademark of Gordon J. Gow Technologies, Inc. All other trademarks are the property of their respective owners. As we continually strive to improve our products, TRIBUTARIES® reserves the right to change product specifications without notice. The technical and other information contained herein is not intended to set forth all technical and other specifications of TRIBUTARIES® products. Additional information can be obtained on-line at www.tributariescable.com Gordon J. Gow Technologies, Inc.Orlando, FL 32809www.tributariescable.com

AC100

DVD Player

Amplifier

Amplifier

Amplifier

Connection and Installation

Specifications

Input:• 1 Coaxial RCA Jack and 1 Toslink (fiber optic) port

Output:• 1 Coaxial RCA Jack and 1 Toslink (fiber optic) port

Power:• DC 7.5V / 500 mA, center positive

Dimension:• 1 5/8” (42mm)W x 1 9/16” (40mm)D x 7/8” (22mm)H

AC100_MANUAL.indd 4 10/26/07 8:34:46 AM