L500Digital Voice Recorder with crystal touch screen

Instruction Manual and Warranty

Any questions, please contact us firstly:Website: http://aomago.com/Email: support@aomago.com

We’re there to assist you all the time!

Original package with barcode information, include:

1*L500 voice recorder,1*earphone,

1*Aomago card for after-sale service.

1*USB cable (For data transmission and charging),

Registered VIP service within 30 days to obtain effective

customer service, and extended the warranty to 18

months.Please confirm when you open package.Please read all the instructions carefully and keep

this in a safe place for future reference.

Instruction

1

2

3

4

5

6

8

9

10

11

12

7

13

14

15

16

1

2

3

4

5

6

8

9

10

11

12

7

13

14

15

16

Screen

Bulit-in Mic

Earphone Jack

Menu

Rewind / Previous

Fast Forward / Next

Speaker

Vol- / Down

A-B Repeat

Vol+ / Up

Rec/Save

Turn ON/OFF

Reset

USB

NO. Function

Back

Play/Pause

Content Quick Start Guide..........................................................1PLEASE DO NOT DO.....................................................2Basic Operation Guide..................................................21. Recording settings.......................................................8

2. System Setting...........................................................10

3. Play mode..................................................................12QA..................................................................................16

1.1 Record Format.......................................................81.2 Set Rec Bitrate.......................................................81.3 Auto record.............................................................81.4 AVR mode..............................................................91.5 Monitor...................................................................91.6 Subsection record..................................................9

2.1 Display settings.....................................................102.2 Date and time........................................................102.3 Language..............................................................112.4 Password setting..................................................112.5 Power off Set........................................................112.6 Information............................................................122.7 Disk space............................................................122.8 Format device.......................................................122.9 Factory settings....................................................12

1）Recorder crash.....................................................162）Restore factory settings........................................163）Format device.......................................................164）Forget Password...................................................165）Failed to connect to your computer.......................166) Disk errors.............................................................17

Switch Off/On : Long Press and hold the button of the right side to turn on, long press and hold again to turn off it.

REC : The REC button on the right side.Push up -->start recordingPush down --> save the recording files.

Please back up your data as often as possible.

Quick Start Guide

Important Notes for using this device:

When the voice recorder is in low battery, please charge it immediately.This device supports charging and recording at the same time.Make sure recording files has been saved successful-ly before shutdown.Please use supplied USB cable to transfer data from recorder to computer. Not all USB cables support data transfer.

You can charge the device to the computer or wall charger socket by USB cable (Please attention the Charger input voltage should BELOW 5V 1A)

1

PLEASE DO NOT DO

Basic Operation Guide

Do not scratch the device body.

Please do not format the device unless you have backed up all files.

Device will automatically turn off when no operations for a long time.

Using the supplied USB cable connect to your computer’s USB port or a USB adapter (5v). The battery can be fully charged in three hours.

1）To charge the device

When formatting the device, please not to unplug the USB cable and turn off recorder at will, or the files would be lost.

Please do not use VOR function for important recording, because this function can not catch a complete recording. When the recording DB is low, device will pause the recording.

Please do not touch any buttons when the device connected to your computer.

During recording, please do not press any button, or do not put it in your pocket because it would generate noise, ensure that the machine is motionless still in the recording.

2

①　Connect to computer by using the supplied cable.

2）To transfer files to your computer.(See Pic)

②　Finding out “Removable Disk”on computer.③　Click to enter, copy your files to your computer, you can also delete files on computer.

3

RECORD

USB

4）Record:

3）Switch On: Long press the power button on the right side of the product, it will display WELCOME.Switch Off: Long press the power button again to turn off the device, the screen will show Bye Bye.

①　Push up the button to REC, it will start to recording and the screen digits start to moving.②　Push down the button to save the recording.

ON

OFF

Rec

Save

4

5

Vol+ / Up

Vol- / Down

）Pause/Resume

7）Adjust Volume

①　In the process of recording,

After saving the recording, press Play/Pause button to play current recording file.

In playback, you can use the ‘∧/∨’ button to adjust the volume.

18:09

WAV 512kbps

0:00:02019:37:37

20191021-180932.WAV

5

short press the Play/Pause

button to pause the recording.

② In the process of recording,short press the Play/Pause

button again to continue

recording.

6）Playback RecordingsPLAY/PAUSE

8）Fast forward / Rewind

9) Previous/Next

During the playing of recording:

Short press the ‘ >’ or ‘ <’ button to browse the Previous/Next on the recording files or music tracks.

Long press the ‘ >‘ button to use the fast forward.Long press the ‘ <‘ button to use the rewind.

Fast forward

Rewind

0004/0012

512kbps

13 A-B

0:00:52/0:07:10

18:09

20191017-20590

Press and hold

Previous song

Next song

18:09 001/001

A-B

0:00:52/0:07:10

Mp3 player

6

Tap it

10）Play Music (Used as Player)

11）Delete Files

1. Please connect device to your computer.

1. Delete One:

2. Delete All:

① In the play / pause position, short press the ‘M’ button to access the main menu.② To select the ‘Delete’ menu, then short press the Play/Pause button, choose ‘Yes’ to select.

① In the play / pause position, short press the ‘M’ key to access the main menu. ② select ‘Delete all’ menu, then short press the Play/Pause button, choose ‘Yes’ to delete all the audio files.NOTE : When you turn on the device, we can press the ‘ >/<‘ button to select the files we want to delete.By default, it will read the latest files, so if we're going straight to delete, it will delete the latest file.Deleted file cannot be found, please remember to backup.

2. To copy music files from your computer to the device.3. After finished the coping, please make it security ejected. Please do not unplug the USB cable directly.4. Long press the ‘M’ button to switch to the music playing page. Long press the ‘M’ again to switch to recording files page.

7

1. Recording settings

① Press Auto record to set auto record setting.② Press Record on/off to choose turn on/off auto record.

① Once: It can only be run once.② Daily: It will operate every working day, from Monday to Friday.

1.1 Record Format

1.2 Set Rec Bitrate

1.3 Auto record

Recording in WAV or MP3 format according to individual needs.

Turn on/off auto record (Record On/Off)

AutoREC cycle

① Press “M”button to enter into main menu.② Selecting Recording settings, press Play/Pause button to enter.

Format

WAV 512kbps 768kbps 1024kbps 1536kbps

32kbps 64kbps 128kbps 192kbpsMP3

Bit Rate

8

③ In AVR mode, you still need to push down the power button to save the recording files when you finished recording.④ AVR Level: It means the level of sensitivity, form grade 1 to grade 6. Grade 6 is very sensitive, and can capture any quiet voice( that is, normal ambient noise will activate recording ).

① Turn on the AVR switch.② You can select the different levels of AVR according to the different environment.

1.4 AVR mode

1.5 Monitor

Start Time: Press ‘∧/∨’to set the time you want to start auto recording, press Play/Pause to confirm the time.End Time: Press ‘∧/∨’to set the time you want to save your auto recording.Note: Please confirm or synchronized the system time of device.

AVR switch: Turn on/off the AVR function.

It is off by default. After you turn it on, you can use headphone to listen to the recording when recording.

Note: Please do not use this function in important lectures or meetings. It may skipped or lost some important words due to low DB.

9

2. System Setting

Brightness: Brightness can be set from 0-15, press‘∧/∨’ to adjust. The larger the number(1-15), the brighter the screen. Press Play/Pause button to confirm and save the setting.Backlight timer: There are 5 different brightness timer mode for you to select, 10s/20s/30s/60s/always on.

① Select and press Play/Pause to enter Set date.

① Select and press Play/Pause to enter Set time.

② Press “∧/∨” to set Year, Month, Day.

② Press“∧/∨”to set the hours and minutes.

③ Press “>/<” to move to the next step. Press the Play/Pause button to confirm and save the settings.

③ Press“>/<” to move to next step. Press the Play/Pause button to confirm and save the settings.

1.6 Subsection record

2.1 Display settings

2.2 Date and timeSetting date

There are 30/60/90/120 minutes of different time periods, you can choose it as your individual needs. After you select, it will save the file as the time.

Press the ‘M’ key to enter Menu options, press ‘∧/∨’ button to select the System settings, press the Play/Pause button to confirm and enter.

10

Save Power off : The device allows you to select 1-10 minutes automatically shutdown time based on individual need. Click Play/Pause button to confirm. It will automatically shutdown in standby condition.Set sleep timer:Range:1-120 minutes.You can set it according to your needs within this range.Press Play/Pause button to confirm after finish your setting. It will automatically turn off at this time. (The recording will be automatically saved arrived the sleep time )

④ If the password function is on when you connect to your computer, you will need to enter the correct password, or you cannot connect to the computer.

① Password switch: The Default is off. You need to select Turn on or off.② Password change: Select the password change, Press Play/Pause to enter setting.③ The screen will display 0000, press “∧/∨” button to set the new password numbers. Press‘ >/<‘ to move to the next step. Play/Pause button again to confirm.

2.3 Language

2.4 Password setting

2.5 Power off Set

The default language is English and Spanish.Note : If the device setting error, please contact our customer service.

Note: If you forget your password, please enter 1024 and press Play/Pause button to enter.

11

3. Play mode

Click Play/Pause button to enter, then press“∧/∨”keys to select YES/NO. Press Play/Pause button to confirm. After choose ‘Yes’, the device will start to format and delete all data. It will complete the process when the device restarts.

2.6 Information

2.7 Disk space

2.8 Format device

2.9 Factory settings

3.1 Repeat offRepeat off: According to the orders to play the file,like figures and alphabetsRepeat 1 : Loop the current file.Shuffle：Play files in random orderRepeat all：Loop through all file contents.

View product firmware version and release date.

It displays the available space and total space.

It will format the disk and erase all data on the device, so remember to back up important files before execution.

NOTE: Please DO NOT power off when you format a device. If the device is incorrectly cut off, it will appear as a disk error.

Press Play/Pause key to enter, then press “∧/∨” keys to select “YES/ NO”. Press Play/Pause button again to confirm.

12

3.2 AB Repeat settings

3.3 Equalizer

3.4 Variable Speed Playback

Support for WAV /MP3 format.

Replay Times: Between 0-10 times, press the“∧/∨” to select, then press Play/Pause button to confirm.Replay Interval：In 0-10 seconds, press the “∧/∨” to select, then press Play/Pause button to confirm.

There are many styles for you to select, you can choose it as your individual needs. (Rock, Funk, Hip hop, Jazz, Classical and Techno)

Using “∧/∨” to set variable playback speed, press Play/Pause button to confirm.0 to +8 are quick playback speed, -1 to - 8 are for slow playback speed.The normal speed is 0, remember to press the Play/Pause key to save the setting.

13

Record Parameter

Note : This form displays the maximum time of recording files can be stored in the device, instead of battery time. The device capacity be bound by the entity.

WAV

MP3

1536kbps 12hours 24hours 48hours

1024kbps

768kbps 24hours 48hours 96hours

512kbps

192kbps

128kbps

64kbps

32kbps

96hours

145hours

290hours

580hours

192hours

290hours

580hours

1160hours

384hours

580hours

1160hours

2320hours

36hours 72hours 144hours

18hours 36hours 54hours

8GB 16GB 32GBRecordingQuality

14

Production information

Product Dimension 102*26*10 mm

Screen Size 135*240

USB Socket USB 2.0High Speed

Charging lnput 1A 5V

Windows98 and later version,XP,Windows 7/8/10

8GB 16GB 32GB （Subject to the device）

Record Bit Rate

Support System

Earphone Output

Memory

3.7V MAH Lion PolymerBattery

MP3/WAV/FLAC/APE/OGG/WMASupport Music Format

Full charged,recording at 32kbps could work 47hours

Max Recording Battery Time

12hours （single full charged with earbud, screensaver）

Music Playback Battery Time

1536kbps 512kbps 768kbps 1024kbps 192kbps 128kbps 64kbps 32kbps

15

1）Recorder crash

2）Restore factory settings

3）Format device

4）Forget Password

5）Failed to connect to your computer

A: When the device crashes, please press the RESET button and the device will restart, but it will not delete the files on the device.

A: If you get confused when set, it is useful to restore the factory settings.

A: Format the disk, it will delete all the data on the device. The device can also be formatted on a Windows or MAC computer. If you want to format on the MAC computer, please contact our customer service.

A: If you have forgotten your password, please enter 1024, then press Play/Pause button to enter.

Supplied USB cable is required. If you failed to connect to the computer, try the following ways:A. Setting a password, it need to enter the password when connecting to the computer.B. The USB cable is damaged, try using the charger line.C. The computer outlet is loose, try another outlet.

Q&A

16

17

6.) Disk errors

D. The computer is not connected to the Internet. For some computers, they need to use the Internet to identify the device, so just restart the computer and connect the device again.

Turn off the device. Connect your device to a Windows system computer. It will automatically prompts you to format the disk to return to its normal state.

Note: If you are using a MAC computer, please contact our customer support. Reformatting on a MAC computer requires different options.

E. When entering the charge-only mode, do not press any button while connected to the computer

Solution: