digitest ii automatic motorized hardness testing system · din iso 7619, din en iso 868, astm d...

Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211

[email protected] | www.WorldofTest.com

USA Canada UAE Mexico India Hong Kong

TESTING TECHNOLOGIES

The most accurate and versatile hardness tester on the market, DigiTest positions itself as the top level Shore/IRHD hardness tester with a modular design to suit virtually every Shore or IRHD hardness measurement scale for Polymers. The automatic test procedure of DigiTest eliminates the operator’s test influence on test procedure and thus always provides the most accurate results.Depending on the hardness scales of your choice, from any of Shore scales A, A0, B, 0, C, D, D0, 00, 000, 000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH, you can select the most cost effective combination of required test heads, and expand and upgrade it at any time in the future.The extensive range of accessories including centering devices, software, as well as Combo Test heads, provide the most comprehensive package for your high precision measurements at a reasonable cost.New pick-up bracket and new electronic unitOlder test stands and measuring devices can be used with the new pick-up bracket and electronic unit.

• Electronic unit provides clear display of measured value, navigation menu and Data Output. • Easy to use with limited operator influence to guarantee accurate and repeatable hardness test results. • Reading in the display gives assistance for the correct selection of the measuring device during your measurement when the measured value is above or below the limit value. • USB-interface for data transfer. • Modular, digital hardness testing system. • Automatic identification of the measuring range and of the measuring time • Integratable in an automatic production process. • Hysteresis function

DIN ISO 7619, DIN EN ISO 868, ASTM D 2240, DIN ISO 48, DIN ISO 27588, NFT 46-003, ASTM D 1415, JIS K 6253

DigiTest II Automatic Motorized Hardness Testing Systemwww.WorldofTest.com/automatic-motorized-durometer

Features





Test Method Range of Application Standard Minimum material thickness [mm]

Indenter (mm)

Rubber- and plastics hardness

Shore A

soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc ...

DIN EN ISO 868 4

DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A 26

6

Shore A0 Shore E see Shore A DIN ISO 7619

ASTM D 2240 6

M Shore A see Shore A Qualitest standard 0,5

Shore D

hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose- Acetate, etc ...

DIN EN ISO 868 4


6

M Shore D/C/D0 see Shore D 0,5 Qualitest

standard 1,5

Shore B middle hard materials from rubber, typewriter roles, flat materials ASTM D 2240 6

Shore C plastics and middle hard rubber materials ASTM D 2240 6

Shore D0 plastics and middle hard rubber materials ASTM D 2240 6

Range of Applications





Shore D0 plastics and middle hard rubber materials ASTM D 2240 6

Shore 0 soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon

ASTM D 2240 6

Shore 00 sponge- and foam rubber, cellular rubber, silicone ASTM D 2240 6

Shore 000 sponge- and foam rubber, cellular rubber, silicone ASTM D 2240 6

Shore 000 S see Shore 00 / 000 ASTM D 2240 6

IRHD M thin walled O-rings, moulded parts, standard plates


0,6





IRHD H see Shore D DIN ISO 48, ASTM D 1415, NFT 46-003, BS903 Part. A 26

6

IRHD N soft rubber, high elastic materials, plastic ductile materials


6

IRHD L sponge- and foam rubber, cellular rubber, silicone


10

VLRH sponge- and foam rubber, cellular rubber, silicone DIN ISO 27588 2

Measuring Device





IRHD N/H/L For soft rubber, highly elastic materials and plastically deformable materials of a material thickness from 6 up to 10 mm IRHD L from 10 up to 12 mm Hysteresis function

Shore 00/000 For sponge and cellular rubber, foam rubber, silicone, similar to gel materials from a material thickness of 6 mm

VLRH For sponge and cellular rubber, foam rubber, silicone, similar to gel materials from a material thickness of 1 mm Hysteresis function

Shore A/B/0 For concave and convex moulded parts of a material thickness of 4 or 6 mm Micro shore A from a minimum thickness of 1 mm

Shore D/C/D0 For moulded parts of a material thickness of 4 or 6 mm Micro shore D from a minimum thickness of 1 mm

Shore A/D For flat plate materials of a material thickness of 4 or 6 mm

Quick Centering Device





Barofix Centering device for a quick centering of O-rings of a cord diameter between 0,6 to 5,0 mm Outer diameter to 50 mm

Barofix With plexiglas plate (200 x 200 mm) and a sample clamping device Quick centering device for O-Rings with a cord diameter from 0.6 to 8.0 mm and max. outer diameter of 200 mm Plexiglas plates with different sizes are available.

Barofix II (Compatible with digitest II only) Automatic centering device for quick centering of O-rings of a cord diameter between 1,0 to 5,0 mm or 4,0 to 20 mm

Centrofix Centering device for quick centering of rubber tubes or hoses





• A complete tester consists of :• Test Stand• Control Box• Pick-up Bracket• One or several interchangeable test heads depending on application, test heads available for Shore scales A, A0, B, 0, C, D, D0, 00, 000, 000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH (See Separate price sheet)• One or several centering devices depending on application Optional software or keyboard interface (for export of results to excel w/o software)

Selection Guide:

digitest ii automatic motorized hardness testing system · din iso 7619, din en iso 868, astm d...

Documents