SUPER IMPEX ACE BIMETALLIKS INDIA PVT. LTD. www.superimpex.comwww.aceelectricals.com 1 DIN MOUNTING RAIL (MICRO) DIN RAIL 15 X 5.5mm THICKNESS 1mm, SLOTTED (WEIGHT 290 GMS APP.) & UNSLOTTED (WEIGHT 310 GMS APP.) 2 METRES / 6 6 LONG ZINC-BICHROMATE COLD ROLLED ELECTOLITICALLY PLATED STEEL. DIN MOUNTING RAIL (OMEGA) DIN RAIL 35 X 15mm THICKNESS 1.5mm, SLOTTED (WEIGHT 1.220 KGS APP.) & UNSLOTTED (WEIGHT 1.340 KGS APP.) 2 METRES / 6 6 LONG ZINC-BICHROMATE COLD ROLLED ELECTROLITICALLY PLATED STEEL. SUPER IMPEX ACE BIMETALLIKS INDIA PVT. LTD. www.superimpex.comwww.aceelectricals.com 2 DIN MOUNTING RAIL (STANDARD) DIN RAIL 35 X 7.5mm THICKNESS 1mm SLOTTED (WEIGHT 620 GMS APP.) & UNSLOTTED (WEIGHT 666 GMS APP.) 2 METRES/ 6 6 LONG ZINC-BICHROMATE COLD ROLLED ELECTROLITICALLY PLATED STEEL. TERMINAL BLOCK CHANNEL TERMINAL BLOCK 32mm THICKNESS 1.5mm SLOTTED (WEIGHT 1.370 KGS APP.) & UNSLOTTED (WEIGHT 1.525 KGS APP.) 2 METRES / 6 6 LONG ZINC-BICHROMATE COLD ROLLED ELECTROLITICALLY PLATED STEEL.

SUPER IMPEX ACE BIMETALLIKS INDIA PVT. LTD. www.superimpex.comwww.aceelectricals.com 3 SPECIFICATION OF ALL CHANNELS: * Material used in Channels : CR Coil IS 10748 * Tolerance : On all Sizes:(+/-) 0.50 mm Flatness :(+/-) 0.50 mm Paralallity: 0.50 mm Right Angle :(+/-) 18 Bend/camber: 1.0 mm/mtr Twist: 1.0 mm/mtr Sq. Cutting : 1.0 mm Length upto 1mtr :(+/-) 1.0 mm Length upto 2 mtr :(+/-) 1.0 mm SUPER IMPEX ACE BIMETALLIKS INDIA PVT. LTD. www.superimpex.comwww.aceelectricals.com 4 PRODUCTION PROCESS & QUALITY CONTROL: 1.Raw material for steel is specially ordered which ensures uniformity in quality, tensile, hardness, bendy etc. 2.Coils are loaded to roll forming machine using decoiler. 3.The same is cut to length of 4002 mm using a limit switch this ensures no short length. 4.Rails are cut to a size of 2001 cm on a power press with a die punch to avoid any cutting wastage. 5.Cut to size channels are loaded on a power press to punch the slots as per specification. 6.Zinc plating or Cobalt Zinc plating (normally 9 microns or as per customers specification) 7.Colour passivation (Yellow Yellow Blue etc.) 8.Packing : 10 pcs are shrink wrapped with a plastic foil. 10 such bundles in a HDPE Woven material coated corrugated boxes. QUALITY CONTROL AT VARIOUS STAGES: 1.Material Control by way of ordering special grade suitable for channel. 2.Length Accuracy using limit switch to maintain equal lengths within permissible tolerance (+/- 1mm). 3.Templates used in roll forming machine are made from wire cut and are regularly checked for accuracy of the range. 4.Special jigs can be used for measuring accuracy for the channels offering 100% inspection for each channel. 5.Special chemicals of high grade used for plating to ensure high quality of plating and rust resistance for very long period. 6.Plating certificate and salt test reports available on request.