direct acting indicating analogue electrical measuring instruments and their accessories - part 9...
TRANSCRIPT
-
IEC 60051-9:1988, Amendment 1:1994 and Amendment 2:1995 are endorsed as Malaysian Standard with the reference number MS IEC 60051-9:2008.
MS IEC 60051-9:2008
DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 9: RECOMMENDED TEST METHODS (FIRST REVISION) (IEC 60051-9:1988, AMD. 1:1994, AMD. 2: 1995, IDT)
ICS: 17.220.20 Descriptors: measurement of electrical, magnetic, quantities
Copyright 2008 DEPARTMENT OF STANDARDS MALAYSIA
MALAYSIAN STANDARD
-
STANDARDS MALAYSIA 2008 - All rights reserved
DEVELOPMENT OF MALAYSIAN STANDARDS
The Department of Standards Malaysia (STANDARDS MALAYSIA) is the national standardisation and accreditation body.
The main function of the Department is to foster and promote standards,
standardisation and accreditation as a means of advancing the national economy,
promoting industrial efficiency and development, benefiting the health and safety of
the public, protecting the consumers, facilitating domestic and international trade and
furthering international cooperation in relation to standards and standardisation.
Malaysian Standards are developed through consensus by committees which
comprise of balanced representation of producers, users, consumers and others with
relevant interests, as may be appropriate to the subject in hand. To the greatest
extent possible, Malaysian Standards are aligned to or are adoption of international
standards. Approval of a standard as a Malaysian Standard is governed by the
Standards of Malaysia Act 1996 (Act 549). Malaysian Standards are reviewed
periodically. The use of Malaysian Standards is voluntary except in so far as they are
made mandatory by regulatory authorities by means of regulations, local by-laws or
any other similar ways.
The Department of Standards appoints SIRIM Berhad as the agent to develop Malaysian Standards. The Department also appoints SIRIM Berhad as the agent for
distribution and sale of Malaysian Standards.
For further information on Malaysian Standards, please contact: Department of Standards Malaysia OR SIRIM Berhad Century Square, Level 1 & 2 (Company No. 367474 - V) Block 2300, Jalan Usahawan 1, Persiaran Dato Menteri 63000 Cyberjaya P.O. Box 7035, Section 2 Selangor D.E. 40911 Shah Alam MALAYSIA Selangor D.E. Tel: 60 3 8318 0002 Tel: 60 3 5544 6000 Fax: 60 3 8318 1455 Fax: 60 3 5510 8095 http://www.standardsmalaysia.gov.my http://www.sirim.my E-mail:[email protected]
-
MS IEC 60051-9:2008
STANDARDS MALAYSIA 2008 - All rights reserved i
Committee representation The Industry Standards Committee on Electrotechnical-2 (ISC S) under whose authority this Malaysian Standard was adopted, comprises representatives from the following organisations: Department of Standards Malaysia Federation of Malaysian Manufacturers Gabungan Persatuan-persatuan Pengguna-pengguna Malaysia Jabatan Kerja Raya Malaysia Malaysia Energy Centre Malaysian Cable Manufacturers Association Malaysian Electrical Appliances and Distribution Association Ministry of Domestic Trade and Consumer Affairs Ministry of International Trade and Industry SIRIM QAS International Sdn Bhd Suruhanjaya Komunikasi dan Multimedia Malaysia Suruhanjaya Tenaga Tenaga Nasional Berhad The Electrical and Electronics Association of Malaysia TNB Distribution Sdn Bhd Universiti Multimedia Universiti Tenaga Nasional The Technical Committee on Safety of Audio, Video and IT Equipment which supervised the adoption of the IEC Standard consists of representatives from the following organisations: Jabatan Penyiaran Malaysia Malaysian Electrical Appliances and Distribution Association SIRIM QAS International Sdn Bhd Suruhanjaya Tenaga The Electrical and Electronics Association of Malaysia Universiti Malaya Universiti Multimedia Universiti Putra Malaysia The Working Group on Electrical Measuring Equipments and their Accessories which recommended the adoption of the IEC Standard consists of representatives from the following organisations: SIRIM QAS International Sdn Bhd The Institution of Engineers, Malaysia Universiti Malaya Universiti Putra Malaysia Universiti Teknologi MARA
-
MS IEC 60051-9:2008
ii STANDARDS MALAYSIA 2008 - All rights reserved
NATIONAL FOREWORD The adoption of the IEC Standard as a Malaysian Standard was recommended by the Working Group on Electrical Measuring Equipments and their Accessories under the authority of the Industry Standards Committee on Electrotechnical-2. This Malaysian Standard is the first revision of MS 925, Specification for direct acting indicating electrical measuring instruments and their accessories. This Malaysian Standard is identical with IEC 60051-9:1988, Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods, including its Amendment 1:1994 and Amendment 2:1995, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following apply: a) in the source text, "this International Standard" should read "this Malaysian Standard";
b) the comma which is used as a decimal sign (if any), to read as a point;
c) the basis IEC 51-7 is printed in English and French languages. However, only the
English version applied for this Malaysian Standard; and
d) reference to International Standards should be replaced by equivalent Malaysian Standards as follows:
Referenced International Standards Corresponding Malaysian Standards
IEC 60051-1, Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
MS IEC 60051-1, Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
In 1997, the IEC introduced a new numbering system for all of its International Standards, guides and technical reports. The new number for the IEC Standard is IEC 60051-9. This Malaysian Standard cancels and replaces MS 925:1984. Compliance with a Malaysian Standard does not of itself confer immunity from legal obligations. NOTE. IDT on the front cover indicates and identical standard i.e. a standard where the technical content, structure and wording (or is an identical translation) of a Malaysian Standard is exactly the same as in an International Standard or is identical in technical content and structure although it may contain the minimal editorial changes specified in clause 4.2 of ISO/IEC Guide 21-1.
-
msiec60051-9_08full.pdfmsiec60051-9_08full.pdfiec60051-9{ed4.0}_merge.pdfiec60051-9-amd1{ed4.0}b.img.pdf
iec60051-9-amd1{ed4.0}b.img.pdf
iec60051-9-amd2{ed4.0}b.img.pdf