disconnect the inner member mounting the drawer to the cabinet · • telescopic, side mounted •...
TRANSCRIPT
The best choice in precision slides
Branches in Springfield, Pinetown, Chatsworth, Mt Edgecombe, Margate, Richards Bay, Pietermaritzburg, Newcastle, Polokwane, Hillfox, Pretoria, Meadowdale, Centurion, Bloemfontein, Welkom, Bethlehem, East London, Port Elizabeth and Vreedenburg.
Cabinet Opening Width
Max drawer width = Cabinet opening width - 25.4mm
Min Drawer width = Cabinet opening width - 27mm
Max drawer width = Slide length +200mmMin side clearance = 12.7mmMax side clearance = 13.5mm
Drawer Slide Mounting Profile
Disconnect the Inner Member Mounting the Drawer to the Cabinet1. Locate the steel ball retainer of the intermediate member to catch the guiding parts.
2. Push the intermediate member in completely.
3. Push both inner members slightly through the guiding parts and keep them on the track of the steel ball retainers. This is an important step because improper insertionoftheinnermembermaydamagethesteel ball retainers.
4. Pushthedrawerslowlyinwardsuntilitclosescompletely.
5. Open the drawer slowly then close it completely. Repeatseveraltimes.
6. If the drawer can not be moved smoothly, take the drawer out to ensure it’s level and adjust if necessary.
Plastic Ball RetainerOuter Stop
Soft-Close Module
Steel Ball RetainerCenter Stop Slider
Release Lever Latch
Patented Cushion
www.gelmar.co.za
• Telescopic,SideMounted• 32mmHolePattern• Material:Steel,BrightZincPlated• Testedfor50000cycles• Fordrawerswithouthandles• Selfadjustmenttabstoaccommodatevariationinsideclearance• Disconnectleverforquickdrawerremoval
If you apply excessive force on the drawer, the drawer may suddenly open. If you open the drawer by pulling out the drawer, you might damage the push rebound mechanism.
The optimum space between the drawer and cabinet should be between 12.7 - 13.5mm. Should this be out of the tolerance range, then it could affect the soft closing function, resulting in poor movement or shortening the service life of the slide. Make sure that these measurements are accurate as board thickness may vary.
• Telescopic,SideMounted• 32mmHolePattern• Material:Steel,BrightZincPlated• Testedfor50000cycles• 38mmstrokeofsoftclosing• Patentedlownoisecushionmechanism• Selfadjustmenttabstoaccommodatevariationinsideclearance• Disconnectleverforquickdrawerremoval
Length & Extension Code
450mm 7041 35kg500mm 7042 40kg
Length & Extension Code
450mm 7038 35kg500mm 7039 40kg
35+1 0 36
+1 0
38mm Stroke of Soft-Closing
9
Flush
Soft-Close 45mm Full Extension Slide
Push-Open 45mm Full Extension Slide
35+1 0
GAP 3~4 mm
PUSH
35+1 0
9
FLUSH
Rebound27-150
Close SilentlySelf & Soft Closing
!
!
PUSH ONLY
PUSH
OPEN
Drawer Member Installation
Cabinet Member Installation