discover the mircom flex-net system
TRANSCRIPT
![Page 1: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/1.jpg)
![Page 2: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/2.jpg)
FleX-Net Network Series Overview
The FleX-Net system is designed to establish
Mircom as major player against key competitive
fire alarm manufacturers with networking
capabilities;
Notifier
EST
Siemens
Simplex
![Page 3: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/3.jpg)
FleX-Net Network Series Overview
Based on the proven and reliable FX-2000 Series platform
Most of the existing functionality of the FX-2000 is maintained or enhanced
QX-5000 Series audio system is integrated into the FleX-Net system
Network system provides a fully distributed audio system
Firefighter’s telephone are integrated into the FleX-Net to form a networked telephone system
![Page 4: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/4.jpg)
FleX-Net Network Series Overview
Unites multiple FleX-Net intelligent
fire alarm control panels as one
system
Supports copper and/or fiber optic
network cable
All control panels operate
independently, but as a cohesive
system for unified response
Enhanced survivability –
communications loss will not
compromise the system
Easily accommodates future growth
![Page 5: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/5.jpg)
FleX-Net Network Series Overview
FleX-Net main board is equipped with one Signaling Line Circuit, two conventional non-addressable loops, and 4 Notification Appliance Circuits
The FleX-Net system has the look and feel of the FX-2000
Each node supports up to 28 SLCs and up to 7 remote annunciators
Each node supports a maximum of 5000 addressable points
The FleX-Net system has a faster processor with more memory to allow for future enhancements
![Page 6: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/6.jpg)
FleX-Net Series Network Features
Up to 63 nodes
A node can be;
Building
Command Center
A group of floors within a building
Multiple Control Centers
Peer-to-Peer Network Communications
Proprietary ARCnet Communication Protocol
Long track record as industrial networking technology
Redundant Class B or Class A Wiring Configuration
![Page 7: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/7.jpg)
FleX-Net Series Network Features
Built-in BACnet Compatibility
Built-in Computer Graphics software
Built-in Web Server
RS-232 port for event printer or hyperterminal
![Page 8: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/8.jpg)
FleX-Net Series Configuration Features
FXConfig software supports network wide
configuration
DACT and Audio system are integrated into the
Configuration software
Simple easy-to-use interface and one-click
downloading of job to panels
Ability to export to XML
Generate reports for maintenance
![Page 9: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/9.jpg)
FleX-Net Network Applications
Airports
Hotels & Resorts
Colleges & Universities
Office Buildings
Hospitals
High Rise Buildings
![Page 10: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/10.jpg)
Target Customers Medium to large-scale facilities
Hospitality Hotels
Resorts
Retail/Shopping Malls
Department Stores
High Rise Buildings
Banks
Education Schools (Elementary, High and Middle Schools),
Universities/Colleges Dormitories, Campus Buildings, Administration Buildings
Manufacturing Facilities
Corporate Headquarters
Airports
Healthcare Hospitals
Long Term Care Facilities
![Page 11: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/11.jpg)
FleX-Net Network
Supports all FleX-Net
intelligent systems
FX-2003-12NDS
FX-2017-12NDS
FX-2009-12NDS
FX-MNS
![Page 12: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/12.jpg)
FleX-Net Series Network Main Chassis
The FleX-Net Network Main Chassis:
Support the FNC-2000 Fire Network Controller
Module
Support conventional, non-addressable adder
modules
Have the same design as the existing FX-2000 main
chassis
![Page 13: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/13.jpg)
FX-2003-12NDS Compact Network Main Chassis
One SLC, Class C or Class A.
Four NACs, Class B or Class A, rated for
1.7A each.
Includes a 4 line by 20 character back-lit
LCD display.
12A Power Supply.
Will accommodate three internal adder
modules (e.g. network card, DACT, quad
loop adder).
Will accommodate two display adders
(e.g. IPS-2424, RAX-1048, FDX-008).
![Page 14: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/14.jpg)
FX-2003-12NDS Compact Network Main Chassis
FX-2000 Main BoardMain Board
Left-most slot is reserved for a DACT or PR-100 adder module. If neither is required, this slot can be used for other adder modules.
It is recommended to locate the
network card at position #2
![Page 15: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/15.jpg)
FX-2017-12NDS Mid Size Network Main Chassis
One SLC, Class C or Class A.
Four NACs, Class B or Class
A, rated for 1.7A each.
Includes a 4 line by 20
character back-lit LCD
display.
12A Power Supply.
Will accommodate 17
internal adder modules (e.g.
network card, DACT, quad
loop adder).
Will accommodate three
display adders (e.g. IPS-
2424, RAX-1048, FDX-008).
![Page 16: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/16.jpg)
FX-2017-12NDS Mid Size Network Main Chassis
It is recommended to locate the
FNC-2000 network card at position #2
![Page 17: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/17.jpg)
FX-2009-12NDS Large Network Main Chassis
One SLC, Class C or Class A.
Four NACs, Class B or Class A,
rated for 1.7A each.
A 4 line by 20 character back-lit
LCD display.
12A Power Supply.
Will accommodate 9 internal
adder modules (e.g. network card,
DACT, quad loop adder).
The BB-5008 box will
accommodate 7 display adders,
using expansion chassis’.
The BB-5014 box will
accommodate 13 display adders
using expansion chassis’.
or
![Page 18: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/18.jpg)
FX-2009-12NDS Large Network Main Chassis
It is recommended to locate the
network card at position #2
![Page 19: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/19.jpg)
FleX-Net Applications
Size of
Application
FX-2003-12NDS FX-2017-12NDS FX-2009-12NDS
Small X
Medium X X
Large X
With Voice
Evacuation and
Fire Fighter
Telephones
X
![Page 20: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/20.jpg)
FNC-2000 Fire Network Controller Module
Provides network capability to
the FleX-Net Series
Interface for connecting the
optional FOM-2000-SP Fiber
Optic Network Adder Module
Mounts in any of the FleX-Net
fire alarm main chassis
![Page 21: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/21.jpg)
FOM-2000-SP Fiber Optic Network Adder Module
Allows for the use of fiber
optic cabling on the FleX-
Net Series panels
Seamlessly connects to
the interface on the FNC-
2000 Fire Alarm Network
Controller Module
![Page 22: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/22.jpg)
FleX-Net Adder Modules
FleX-Net supports the following adder modules;
Loop Controller
ALC-792M Quad Loop Adder
Conventional Adder Modules
DM-1008A Initiating Device Ckt
SGM-1004A Supervised Output
RM-1008A Relay Module
Auxiliary Adder Modules
UDACT-300A
PR-300 Polarity Reversal Module
![Page 23: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/23.jpg)
RAXN-LCD Network Remote LCD Annunciator
4 lines x 24 character LCD Annunciator
Connects to any node via RS-485 to annunciate the network system
Does not take up a node address
3 ribbon headers support display adders
Mounts in a BB-1000 or BB-5000 Series enclosure
Mircom FleX-Net Fire Alarm Control Panel
Normal Condition
June 18, 2014
![Page 24: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/24.jpg)
24 lines x 40 character LCD Annunciator
Connects to any node via RS-485 to annunciate the network system
Does not take up a node address
3 ribbon headers support display adders
Mounts in a BB-1000 or BB-5000 Series enclosure
RAXN-LCDG Remote Graphic Annunciator
![Page 25: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/25.jpg)
FleX-Net Annunciators and Programmable Modules
FleX-Net supports the
following display adders;
LED Annunciator
RAX-1048TZ
Graphic Driver Modules
MDG-32
AGD-048
Programmable Switches
FDX-008
IPS-2424
![Page 26: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/26.jpg)
![Page 27: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/27.jpg)
Intelligent network panel that supports:
Main fire alarm chassis
Network Controller Modules ▪ Fire, Audio, & Telephone modules
Audio card cage ▪ Supports up to four 60-watt QAA style
amplifiers
30 Amp power supply
Room for up to a 40AH battery-set
Requires BBX-FXMNS enclosure
FleX-Net Integrated Fire and Audio Network Panel
![Page 28: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/28.jpg)
FX-MNS Integrated Fire Alarm Network Main Chassis
One SLC, Class C or Class A.
Four NACs, Class B or Class A,
rated for 1.7A each.
A 4 line by 20 character back-lit
LCD display.
12A Power Supply.
Will accommodate 17 internal
adder modules (e.g. network card,
DACT, quad loop adder).
Will accommodate three display
adders (e.g. IPS-2424, RAX-1048,
FDX-008).
![Page 29: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/29.jpg)
QMB-5000N Main Audio Network Card Cage
Audio and Telephone Control
Multi-channel operation
Distributed audio
5 telephone channels (with TNC-5000)
Multiple amplifier sizes
Uses existing QAA style amplifiers Maximum of 4 QAA style amplifiers
Maximum of 180 watts per enclosure
Amplifiers mount in audio card cage
Maximum of 3 QBB-5001 audio cabinets can be connected to the FX-MNS
Maximum of 3 X 360 Watts
Up to 540W per node
![Page 30: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/30.jpg)
![Page 31: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/31.jpg)
FleX-Net Audio Features
Multi-Channel Operation
Alarm tone can be different per node
Alert tone can be different per node
Paging is common per system
Five Telephone Handset Circuits on the node
Conventional or;
Addressable
Each node will support a master telephone
![Page 32: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/32.jpg)
ANC-5000 Audio Network Controller Module
Provides audio microphone
control on the network
system
Provides space for an Alert
and Evacuation digital
voice message
Mounts on a plate in the
QMB-5000N audio card
cage or in the FX-MNS
main chassis
![Page 33: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/33.jpg)
TNC-5000 Telephone Network Controller Module
Provides 5 hardwired
telephone circuits for the local
floor panel with circuit #1
configurable for the master
telephone handset
Provides network
communication path
Mounts with the ANC-5000 on
a plate in the QMB-5000N
main chassis or in the FX-MNS
![Page 34: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/34.jpg)
QMB-5000N Audio Card Cage
TNC-5000
Telephone
Network
Controller
Module
ANC-5000
Audio
Network
Controller
Module
The black plate mounts
in the first slot
of the QMB-5000N
audio card cage
Space for
4 QAA
style
amplifiers
Both the ANC-5000 and TNC-5000
mount on a black plate
![Page 35: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/35.jpg)
QAA Style Amplifiers
System uses existing QX-5000 Series audio amplifiers
25/70 volt models QAA-5415-25
QAA-5415-70
QAA-5230
QAA-5160
Amplifiers mount in the QMB-5000N audio card cage
![Page 36: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/36.jpg)
Audio Expansion
Ribbon Cable
Maximum of 3 QBB-5001 cabinets FleX-NetTM
Integrated Fire & Voice Panel
Max. 180 watts
QBB-5001
Max. 360 watts
QBB-5001
Max. 360 watts
QBB-5001
Max. 360 watts
![Page 37: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/37.jpg)
QMB-5000 card rack in a
QBB-5001 Box yields 360W
Audio Expansion
![Page 38: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/38.jpg)
Up to 7 Remote LOCs per Node FleX-NetTM
Integrated Fire & Voice Panel
ACU – Autonomous Control Unit
Remote LOCs
![Page 39: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/39.jpg)
QMP-5101N Network Master Microphone Paging Module
Network capable
Includes master paging
microphone and common
control functions
Used with the QAZT-
5302 selector panel
Mounts in a BB-5008 or
BB-5014 enclosure
![Page 40: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/40.jpg)
QMT-5302N Network Master Telephone Control Module
Network capable
Includes master telephone handset and common control functions
Used with the QAZT-5302 selector panel
Mounts in a BB-5008 or BB-5014 enclosure
![Page 41: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/41.jpg)
QAZT-5302
Paging and Telephone Selector Module
Provides zoned
paging and telephone
selection
Connects to:
QMP-5101N Master
Paging Module
QMT-5302N Master
Telephone Control
Module
![Page 42: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/42.jpg)
OpenGN Graphics Software
An aesthetically pleasing high quality
customizable graphical interface between
administrators and monitored buildings
Building ready monitoring control system
with full software management in a user
friendly graphical enabled interface
Easy configuration and customization of
alarm devices
Remote desktop programming from any
location
Upload/download configuration files
without taking the whole system off-line
Customizable fire annunciation graphical
icons to provide customer specific site
representation
![Page 43: Discover the Mircom FleX-Net system](https://reader031.vdocument.in/reader031/viewer/2022012322/55a3a2151a28ab74488b46d8/html5/thumbnails/43.jpg)