display devices and touch screen technology
TRANSCRIPT
![Page 1: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/1.jpg)
Display Devices And
Touch Screen Technology
Presented By:-
Abhishek Pal
![Page 2: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/2.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT(Cathode Ray Tube) Displays
2. LED Displays
3. LCD Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 3: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/3.jpg)
Introduction of Display Devices
• A display device is an output device for presentation of information in visual or tactical form
• One of the earliest electronic displays is the cathode ray tube (CRT), which was made commercial in 1922
• Since then electronic display devices based on various principles are developed.
![Page 4: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/4.jpg)
Types of Display devices
• Active display devices are based on luminescence.• Luminescence • Photo-luminescence • Cathodo-luminescence • Electro-luminescence
• Passive display devices reflect or modulate light.
![Page 5: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/5.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LED Displays
3. LCD Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 6: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/6.jpg)
CRT (Cathode Ray Tube) Displays
• The Cathode Ray Tube (CRT) was invented by German physicist Karl Ferdinand Braun in 1897.
• Cathode Ray Tube (CRT) contains four basic parts:
• Electron gun,
• Evacuated glass
• Focusing and accelerating systems,
• Deflecting systems,
![Page 7: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/7.jpg)
CRT Displays Principles• Display principle
• Raster Scan Display Principle In this system the screen is scan in vertically and
horizontally• Random Scan Display Principle
Here the electron gun of CRT illuminates point and/or straight lines in any order
• The frequency at which a picture is redrawn on the screen is referred to as the “Refresh Rate”.
• The maximum number of points that can be displayed on a CRT is referred to as the “Resolution”.
![Page 8: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/8.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LED Displays
3. LCD Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 9: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/9.jpg)
LED Display• An LED display is a flat panel display, which uses light-emitting
diodes as a video display.
• A cluster of red, green, and blue diodes is driven together to form a full-color pixel, usually square in shape.
• Matrix of diodes is arranged to form pixels and picture definition is stored in refresh buffer.
• Information is read from refresh buffer and converted into voltage levels that are provided to diodes, thus producing light patterns in the display.
![Page 10: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/10.jpg)
Techniques Used
Three techniques are used in making LED displays:-
1. Edge-Led :- It is done around the rim by using a special diffusion panel to spread the light evenly behind the screen.
2. Full-array Led :- The are arranged behind the screen and their brightness are not controlled individually.
3. Dynamic ‘Local Dimming’ Led:- This type of back-lightning allows dimming of specific areas of darkness on the screen.
![Page 11: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/11.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LED Displays
3. LCD Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 12: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/12.jpg)
LCD Displays• George H. Heilmeier invented LCD in 1964
• The heart of all liquid crystal displays (LCDs) is a liquid crystal itself.
• Produces pictures by passing polarized light through liquid-crystal material.
• There are three basic types of liquid crystals which are termed
1. Nematic
2. Chiral
3. Smetic
![Page 13: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/13.jpg)
Basic Design of LCD Display
![Page 14: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/14.jpg)
Working PrincipleOff State
1. Surrounding light is polarized on the upper plate.
2. Light moves along with liquid crystals and twisted at right angle
3. Molecules and lights are parallel to the lower analyzer.
4. Light passes through the plate and thus screen appear transparent.
![Page 15: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/15.jpg)
Working PrincipleON State
1. Surrounding light is polarized on the upper plate.
2. Light moves along with liquid crystals which moves straight along the electric field.
3. Molecules and lights are perpendicular to the lower analyzer.
4. Light cannot pass through.
5. Screen appear dark.
![Page 16: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/16.jpg)
ComparisonCRT LCD LED
POWER CONSUMPTION
High power is consumed
consumes 50-70% less energy as compared to CRT
consumes 30-40% of less power than LCD
PICTURE QUALITY
High contrast ratio Poor picture quality than LED
Superior than CRT and LCD
COST Low cost High cost(~2 times of CRT)
Very high cost(~4 times of CRT)
![Page 17: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/17.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 18: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/18.jpg)
TOUCH SCREEN TECHNOLOGY
![Page 19: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/19.jpg)
Introduction
• First described by E.A Johnson in his work on capacitive touchscreen in 1967.
• A Touchscreen is basically a input deviceso it should be combined with a displaydevice and a computer.
• A Touchscreen basically includes:-1. Touch Screen Sensor
2. Controller
3. Software Driver
![Page 20: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/20.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 21: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/21.jpg)
21
Components Touch Screen Sensor
• A touch screen sensor is a clear glass panel with a touch responsive surface.
• The sensor generally has an electrical current or signal going through it.
• Voltage change determine the point of touch.
![Page 22: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/22.jpg)
22
ComponentsController
• The controller connects between the touch sensor and the PC.
• The controller determines what
type of connection you will
need on the PC.
• Controllers are available that
work with DVD players and
other devices.
![Page 23: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/23.jpg)
23
ComponentsSoftware Driver
• The driver allows the touchscreen and computer to work together.
• Most touch screen drivers today
are a mouse-emulation type driver.
• This allows the touchscreen
to work with existing software.
![Page 24: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/24.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 25: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/25.jpg)
25
Introduction• In 1971, the first "touch sensor" was developed by Doctor Sam
Hurst
• A touch screen is an Electronic
Visual Display.
• The touch screen is one of the
easiest to use and most intuitive of all PC interfaces
• This touch screen works on the principle of voltage dividers.
![Page 26: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/26.jpg)
Resistive Technology
V=Voltage (Volts)A difference in electrical potential
I=Current (Amps)A flow of electric charge which (by convention) flows from a higher to a lower voltage potential
R=Resistance (Ohms)Resists the flow of electric current
I = V/R Current flow proportional to Voltage and inversely proportional to resistance
![Page 27: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/27.jpg)
Potential Divider
21
22
221
2
22
21
21
21
RR
RVV
RRR
VV
IRV
VVV
RR
VI
RRRR
VI
![Page 28: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/28.jpg)
Potentiometer
V2 is proportional to the position of the arrow. At the top V2=V and at the bottom V2=0
![Page 29: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/29.jpg)
Resistive Touch Sensor• The sensor panel consists of several layers, the most important
of which are two thin, transparent layers separated by thin space.
• Top screen has coating on theunderside surface.
.• Voltage is applied to one layer
and sensed by the other.
• Generally a 4-wire technology is used.
![Page 30: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/30.jpg)
4-Wire Technology• It consists of 4 resistances arranged so indicate X and Y
Cartesian axis.
• When the screen is touchedthe conductive coating on the coversheet connects with the coating on the glass.
• The controller reads the X and Y positions.
![Page 31: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/31.jpg)
Calculation of Touch Position
Calculation of
Y-PositionX-Position
![Page 32: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/32.jpg)
5-Wire and 8-Wire Technology
![Page 33: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/33.jpg)
Advantages & Disadvantages
ADVANTAGES
• Force activated so can use finger even with a glove, stylus or any other (non sharp) prodding device.
• Tolerates dust/dirt, rain and insects.
DISADVANTAGES
• Conductive coating reduces display brightness.• Continual flexing of outer layer causes microscopic cracks so
affects linearity of resistance (other processes can overcome this)
![Page 34: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/34.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 35: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/35.jpg)
Capacitive Touch Screen• It is an all glass touch screen with a transparent metallic
conductive coating.
• It is made up of all-glass material with transparent conductive coating.
• The transparentconductor used is Indium Tin Oxide.
![Page 36: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/36.jpg)
Working principle • The basic formula of capacitance is
Here;
C= capacitance; ; A= area of the platesd= distance between plates
• Hence , larger the area of plates greater is the capacitance and smaller the distance between them larger the capacitance.
![Page 37: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/37.jpg)
Working principle• The basic idea is the consideration of human body to be
conducting.
• Whenever the screen is touched a small amount of current is attracted by the finger causing change in thecapacitance.
• These are of 2 types:-
1. Surface Capacitive
2. Projected Capacitive
![Page 38: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/38.jpg)
Surface Capacitive Touchscreen
• It consists of uniform conductive coating on one side of the glass panel.
• Electrodes around the panel edge evenly distribute a low voltage around the conducting layer.
![Page 39: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/39.jpg)
Surface Capacitive Touchscreen
![Page 40: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/40.jpg)
Projected Capacitive Touchscreen
• It have front and protective glass to provide additional optical and strength enhancements options.
• Its middle layer consists of laminated sensor grid of micro-fine wires.
![Page 41: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/41.jpg)
Projected Capacitive Touchscreen
• The screen is divided into small grids of unit cell.
• Whenever a touch occurs, the finger disturbs the electric field projected by sensor by conducting electric current.
• The location is calculated by checking the capacitance at each point on the grid regularly.
![Page 42: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/42.jpg)
Advantages & Disadvantages
ADVANTAGES
• It has high resolution and Image clarity.• Immune to surface contaminants like dirt, grease or moisture.• Durable and resistant to scratches.
DISADVANTAGES
• Will work only when touched by a conductive device.• Some capacitive touches can have erratic behavior when
touched by more than one input.
![Page 43: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/43.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 44: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/44.jpg)
SAW Touchscreen Technology
• It have a glass overlay with transmitting and receiving piezoelectric transducers.
• Transmitting transducer, converts the electric signal into ultrasonic waves within the glass.
• These waves are reflected across the screen by reflectors.
![Page 45: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/45.jpg)
Working Principle
![Page 46: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/46.jpg)
Advantages and Disadvantages
ADVANTAGES• It provides superior image clarity, resolution, and higher light
transmission.
• It has the highest durability factor.
DISADVANTAGES• It must be touched only by finger, gloved hand, or soft-tip stylus.
• It is not completely sealable, can be affected by large amounts of dirt, dust, and / or water in the environment.
![Page 47: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/47.jpg)
Outline• Introduction of Display Devices• Types of Display Devices
1. CRT Displays
2. LCD Displays
3. LED Displays
• Introduction of Touch Screen Technology• Components of Touch Screen• Types of Touch Screen Technology
1. Resistive Touchscreen
2. Capacitive Touchscreen
3. Saw Touchscreen
4. Infrared Touchscreen
![Page 48: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/48.jpg)
Infrared Touchscreen Technology
• In 1983, the computer manufacturing company, Hewlett-Packard introduced the HP-150.
• The HP-150 had a built in grid of infrared beams across the front of the monitor which detected finger movements.
![Page 49: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/49.jpg)
Working Principle
![Page 50: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/50.jpg)
Advantages & Disadvantages
ADVANTAGES• It can detect essentially any input including a finger, gloved
finger, stylus or pen.
• It have better durability and optical clarity.
DISADVANTAGE• It is sensitive to dirt/dust that can interfere with the IR beams.
• It suffer from parallax in curved surfaces and accidental press.
![Page 51: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/51.jpg)
References
![Page 52: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/52.jpg)
![Page 53: Display devices and TOUCH SCREEN TECHNOLOGY](https://reader034.vdocument.in/reader034/viewer/2022052210/55528988b4c905b4598b5432/html5/thumbnails/53.jpg)