diy analog vc-lpf · 2014-07-26 · can be converted for external cv input (0..+10v) do not use...
TRANSCRIPT
Description
DIY Analog VC-LPFericarcher.net/devices/DIY-LPF
Basic voltage-controlled filter designed for 9V battery power.
12dB / oct state variable LPF with LM13700-type OTA
5V max input level before distortion.
Center frequency range 40Hz – 12kHz
Build it yourself on perfboard. Use pad-per-hole “PC3” type
version 1.0
MIX, FREQ, and RESONANCE controls
Can be converted for external CV input (0..+10V)do not use with negative voltage
Bill of Materials
Schematic
Values
Names
Placement
GND
Virtual GND
9V
SIGNAL1
SIGNAL2
Top Side
Bottom Side
(top edge)