diy installation guide soft close sliding door...sliding door fittings 40 97 top profile bottom...
TRANSCRIPT
Interior Width: 2000mm
Interior Height: 2200mm
Interior Width:
Interior Height:
12 1 3
2
STEP 2How many doors are required? To calculate the size and number of doors required, use the following guidelines.
Door Width (with Pulling Profiles):
2 Equal Doors = Interior Width ÷ 2
3 Equal Doors = Interior Width ÷ 3
Door Height = Interior Height - 41mm
Top Guide Profile = Interior Width
Bottom Guide Profile = Interior Width
Example Internal width = 2000mmInternal height = 2200mm
Door Height: 2200 - 41 = 2159 Door Width: 2000 ÷ 2 = 1000
Preparing for Installation
STEP 1Measure the internal height and width of the cupboard. Maximum internal width is 4200mm and maximum height is 3000mm.
STEP 3What must be purchased?Using the example above, 2 doors are required.
Therefore the following must be purchased:
• 2 Door Component Set (Code 3137)• Top Guide Profile 2m (Code 4203)• Bottom Guide Profile 2m (Code 4205)• 4 x Pulling Profile 2.5m (Code 3136) Note: You will need Pulling Profiles on both sides of the door.
Installation
3mm Spacer
80mm
45mm
STEP 1Cut the ProfilesStart by cutting the Top, Bottom and Pulling Profiles to the required lengths, calculated in Step 2.
STEP 2Assemble the ProfilesScrew the Top Profile into the carcass.Use Double Sided Hi Tac tape or screws to fix the Bottom Profile into the carcass. The Bottom Profile must be recessed from the edge by 25mm.Secure the Pulling Profiles to the doors, using 8x16 Scews, from the back of the Profile.
STEP 3Mount the ActivatorsMeasure 45mm from the edge of the door to hole centre and fix the Activators in place.
STEP 4Attach the Top RollersMeasure 80mm from the edge of the door to the first hole. Attach the Top Roller and the 3mm spacer provided to the door
STEP 5Attach the Bottom RollersMeasure 25mm from the edge of the door to the first hole. Attach the Bottom Rollers to the door.
25
STEP 6Mount the Soft Close Measure 40mm from inside edge of cupboard to the first screw hole and mount the Soft Close inside the Top Profile.
40mm
STEP 7Position Doors Place the Doors into position by clipping the top of the door into the Top Profile, then the bottom of the door into the Bottom Profile.
Installation Diagram
45 Spacer
25
80
Top rollerActivator
Bottom Roller
Lock nut
40 Soft Close
9mm
21
STEP 8Adjust Bottom Rollers For smooth operation, adjust the Bottom Rollers. The maximum adjustment is 9mm. Be sure to tighten the lock nut once the adjustment is complete.
3mm spacer required
97
Sliding Door Fittings
40
97
Top Profile Bottom Profile Pulling Profile
16
Code L
4203 2m
4204 3m
3134 5m
Code L
4205 2m
4206 3m
3135 5m
Code L
3136 2.5m
3146 3m
Soft Close & Activator
Upper Guide & Spacer
Bottom Roller
Code
3187
Code
3189
Code
3188
max. 30kgsper door
min. 850mm door width
min
max
max. 4200mm Interior width
max
max. 3000mm Interior height
Pre-Pack Components
Code Upper Guide Spacer Bottom Roller
3123 2 2 2 1 Door Set
WARNING:For safety reasons, we recommend that you use Sliding Door Soft Close mechanism (#3189) in conjunction with these fittings.