dl2108t02
TRANSCRIPT
-
8/11/2019 DL2108T02
1/10
Electrical Power Engineering
POWER CIRCUIT BREAKERDL 2108T02
-
8/11/2019 DL2108T02
2/10
-
8/11/2019 DL2108T02
3/10
-
8/11/2019 DL2108T02
4/10
DL 2108T02
ver b20130115 3
3. PUSH-BUTTON CONTROL
The PLC and RELAY control inputs must be low (short - circuit).
-
8/11/2019 DL2108T02
5/10
DL 2108T02
ver b20130115 4
When the module is supplied with the auxiliary voltage, the power breaker K is normally open.
Pressing the push-button S on the RS flip-flop is set and the power breaker K is closed.
At SIGNAL OUTPUT terminals is present a high level, TTL compatible.
Pressing the push-button S off the RS flip-flop is reset and the power breaker driving is inhibited.
-
8/11/2019 DL2108T02
6/10
DL 2108T02
ver b20130115 5
4. RELAY CONTROL
The PLC control input must be low (short-circuit).
The RELAY control input is connected to a switching contact, normally closed.
-
8/11/2019 DL2108T02
7/10
DL 2108T02
ver b20130115 6
When the module is supplied with the auxiliary voltage, the power breaker K is normally open.
With closed RELAY contact, pressing the push-button S on the RS flip-flop is set and the power breaker K is closed.
When the RELAY contact is open the RS flip-flop is reset and the power breaker driving is
inhibited.
Only when the RELAY contact is closed again it is possible to drive the power breaker K by meansof the push-button S on.
-
8/11/2019 DL2108T02
8/10
DL 2108T02
ver b20130115 7
5. PLC CONTROL
The RELAY control input must be low (short-circuit).
The PLC control input is connected to a switching contact, normally closed.
-
8/11/2019 DL2108T02
9/10
DL 2108T02
ver b20130115 8
When the module is supplied with the auxiliary voltage the power breaker K is normally open.
With closed PLC contact, pressing the push-button S on the RS flip-flop is set and the power breaker K is closed.
When the PLC contact is open the drive coil of the power breaker is inhibited and the power contactK is open. The RS flip-flop remains in set state and when the PLC contact is closed again the power
breaker K is closed.
Only pressing the push-button S off the RS flip-flop is reset and the power breaker driving isinhibited.
-
8/11/2019 DL2108T02
10/10
1996 - 201 3 DE LORENZO SPA - Printed in Italy - All right reserved
DE LORENZO SPAV.le Romagna, 20 - 20089 Rozzano (MI) ItalyTel. ++39 02 8254551 - F ax ++39 02 8255181
E-mail: info
@delorenzo.itWeb site s: www.delorenzo global .com - www.technical-education.it -www.delorenzoenergy.com