dme ejectors

Ejector PinsEjector SleevesFlexible Cores

a Milacron Company a Milacron Company

www.dme.net Mol

dmak

ing

Sol

utio

ns

The world’s most complete line of standard pins and sleeves - in stock - ready for immediate delivery.

1/02

/200

7

* Inch

AW p 28-32

S p 22KS p 23S* p 24

D p 12-13

AHX p 7PCM p 8CX* p 17

A p 4TA p 5AH p 6

A-EX* p 16C-EX* p 18THX* p 19

C p 9TC p 10CH p 11FK p 15FW p 14

Index 4

www.dme.net

1/02

/200

7

a Milacron Company - 1 -

Index

REF Description Condition Page

Type A Ejector Pins Nitrided 4

Type TA Ejector Pins Bath Nitrided 5

Type AH Ejector Pins Hardened 6

Type AHX Core Pins Hardened 7

Type PCM Performance Core Pins 8

Type C Ejector Pins Nitrided 9

Type TC Ejector Pins Bath Nitrided 10

Type CH Ejector Pins Hardened 11

Type D Ejector Pins Hardened 12-13

Type FW Flat Ejector Pins Nitrided 14

Type FK Flat Ejector Pins Hardened 15

Type A-EX Ejector Pins Inch Nitrided 16

Type CX Core Pins Inch Hardened 17

Type EX Ejector Pins Inch Nitrided 18

Type THX Ejector Pins Inch Nitrided 19

Type S Ejector Sleeves Nitrided 22

Type KS Ejector Sleeves Hardened 23

Type S Ejector Sleeves Inch Nitrided 24

AW 275 Flexible Cores With Mounting Thread 28

AW 280 Flexible Cores With Mounting Thread 30

AW 281 Clamping Guides 30

AW 282 Guide Bushes 30

AW 283 Extensions 30

Technical Data 33-37

4

In this age of E-Commerce and Global Transparency, D-M-E has introduced its item number into this catalog to simplify & speed up communication with our customers. The item number is the unique driver of our logistic system and assures correct handling throughout our order fulfilment.Please refer to the How To Order box on the bottom of every page.


www.dme.net Eje

ctor

Pin

s

Ejector PinsDuring plastic injection molding and die casting operations, no other single mold or die component takes the beating ejector pins take. They’re always on the move. Always fighting friction. Thermal stress. Mechanical stress. And therefore, they’re always in danger of galling, seizing, bending or breaking if they’re not made of high quality steel with uniform strength - if they’re not hot-forged properly - or if they’re not nitrided to exact specifications for case depth and hardness. Heads annealed for

easy machining.

- 4 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

d1g6

d2 K R L

0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1000 1250A 1,0 x L

EPA05

01,00 3,0 1,5 0,2 4,68 4,94A 1,2 x L 01,20 3,0 1,5 0,2 4,68 4,94A 1,5 x L 01,50 3,0 1,5 0,2 4,16 4,42 4,68 5,20A 1,6 x L 01,60 3,0 1,5 0,2 5,20A 1,7 x L 01,70 3,5 1,5 0,2 4,16 4,94A 2,0 x L 02,00 4,0 2,0 0,2 3,12 3,38 3,38 3,90 4,16 4,42A 2,2 x L 02,20 4,0 2,0 0,2 3,64 3,64 3,90 4,42 4,68 5,20A 2,5 x L 02,50 5,0 2,0 0,3 3,64 3,64 3,90 4,42 4,42 4,94A 2,7 x L 02,70 5,0 2,0 0,3 3,64 3,90 4,16 4,42 4,68 5,46A 3,0 x L 03,00 6,0 3,0 0,3 2,86 3,12 3,12 3,38 3,90 4,16 5,20 5,98A 3,1 x L 03,10 6,0 3,0 0,3 3,90 4,68A 3,2 x L 03,20 6,0 3,0 0,3 3,38 3,90 3,90 4,42 4,68 5,20 5,72A 3,5 x L 03,50 7,0 3,0 0,3 3,64 3,90 4,16 4,42 4,68 5,46 5,98A 3,7 x L 03,70 7,0 3,0 0,3 3,90 4,16 4,42 4,94 5,20 6,50 7,80A 4,0 x L 04,00 8,0 3,0 0,3 3,12 3,12 3,38 3,64 3,90 4,42 5,46 6,50A 4,1 x L 04,10 8,0 3,0 0,3 9,62A 4,2 x L 04,20 8,0 3,0 0,3 3,90 4,16 4,16 4,68 5,20 5,98 7,54 9,36 11,70A 4,5 x L 04,50 8,0 3,0 0,3 4,16 4,42 4,42 4,94 5,20 6,24 7,80A 5,0 x L 05,00 10,0 3,0 0,3 3,12 3,38 3,90 3,90 4,42 4,94 6,24 6,76 7,80 12,22A 5,1 x L 05,10 10,0 3,0 0,3 6,50A 5,2 x L 05,20 10,0 3,0 0,3 4,16 4,42 4,68 5,20 5,72 6,50 8,58 11,44A 5,5 x L 05,50 10,0 3,0 0,3 4,42 4,68 4,68 5,20 6,24 6,76 8,84 11,96A 6,0 x L 06,00 12,0 5,0 0,5 3,38 3,64 3,90 4,42 4,94 5,46 7,28 9,62 12,48 16,90 21,84A 6,1 x L 06,10 12,0 5,0 0,5 7,80A 6,2 x L 06,20 12,0 5,0 0,5 4,68 4,68 5,20 6,24 7,28 7,80 10,66 13,00 16,90A 6,5 x L 06,50 12,0 5,0 0,5 4,94 5,20 5,46 6,50 7,80 8,84 11,70 14,30A 7,0 x L 07,00 12,0 5,0 0,5 5,20 5,72 5,98 6,76 8,06 9,10 12,22 15,08 18,72A 7,5 x L 07,50 12,0 5,0 0,5 7,02 7,54 7,80 9,10 10,40 12,22 15,86 20,02A 8,0 x L 08,00 14,0 5,0 0,5 3,90 4,16 4,94 5,20 6,24 6,76 9,36 11,44 13,78 16,90 26,52 59,02A 8,1 x L 08,10 14,0 5,0 0,5 8,32 10,92A 8,2 x L 08,20 14,0 5,0 0,5 6,24 6,76 7,02 8,32 9,36 10,92 14,30 17,94 22,36 28,34A 8,5 x L 08,50 14,0 5,0 0,5 6,50 7,02 7,54 8,58 9,88 11,44 15,08 18,72 23,14A 9,0 x L 09,00 14,0 5,0 0,5 7,02 7,54 7,80 8,84 10,14 11,96 15,60 19,50 24,18A 9,5 x L 09,50 14,0 5,0 0,5 9,62 10,66 11,70 13,00 15,08 17,16 22,10 26,78A 10,0 x L 10,00 16,0 5,0 0,5 4,68 5,20 5,98 7,28 8,06 9,10 13,52 16,64 20,28 24,70 26,00 76,44A 10,1 x L 10,10 16,0 5,0 0,5 14,30A 10,2 x L 10,20 16,0 5,0 0,5 8,06 8,58 9,10 10,92 12,22 14,30 18,46 22,62 27,82 35,88A 10,5 x L 10,50 16,0 5,0 0,5 8,84 9,10 9,88 11,70 13,52 15,08 20,02 24,44 30,16A 11,0 x L 11,00 16,0 5,0 0,5 9,36 9,88 10,40 12,48 14,04 14,04 21,06 25,74 31,72A 12,0 x L 12,00 18,0 7,0 0,8 6,50 7,54 8,32 10,14 12,74 14,04 17,94 22,36 27,56 35,62 40,82 103,74A 12,2 x L 12,20 18,0 7,0 0,8 7,80 9,36 10,66 11,96 13,52 15,60 21,06 29,64 35,36 42,90A 12,5 x L 12,50 18,0 7,0 0,8 7,80 9,36 10,66 11,96 13,52 15,60 21,06 27,04 32,24 37,96A 14,0 x L 14,00 22,0 7,0 0,8 9,88 11,44 11,96 15,34 16,38 17,42 22,88 28,08 35,10 41,86 52,00A 14,2 x L 14,20 22,0 7,0 0,8 20,28A 16,0 x L 16,00 22,0 7,0 0,8 10,40 12,48 13,26 15,86 18,20 20,28 26,00 33,80 44,46 59,54 73,06 146,12A 18,0 x L 18,00 24,0 7,0 0,8 14,30 17,68 22,62 27,30 31,20 37,44 52,78 68,38 83,20 153,14 210,34A 20,0 x L 20,00 26,0 8,0 1,0 9,88 12,22 15,60 21,58 25,22 29,90 42,90 54,60 66,82 85,02 141,70 208,00A 25,0 x L 25,00 32,0 10,0 1,0 32,76 36,40 43,42 50,70 61,10 78,26 97,24 132,34 207,48A 32,0 x L 32,00 40,0 10,0 1,0 61,10 68,38 77,22 102,44 127,92 157,56 203,58 324,22

Type ADIN 1530 ISO 6751

E P A 0 5 0 1 , 0 0 0 1 0 0

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530/ISO6751Mat.: WAS (~1.2344)Max. Temp: 500°-550°CSurface roughness: Ra

Ejector Pins - Nitrided

+20

0-0,2

0-0,05

+0,20

For individual quantity discounts please contact D-M-E

Prices in €/piece

Items in stock

Non Standard (Contact D-M-E)

AvailabilityFor individual quantity discounts

please contact D-M-E

Prices in €/piece

Items in stock


Availability

4

- 4 -

1/02

/200

7

- 5 -www.dme.net

1/02

/200

7

a Milacron Company

REF Itemprefix

d1g6

d2 K R L

0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1000

TA 1,5 x L

ENA05

01,50 3,0 1,58 0,2 3,38 4,16 4,16 4,68TA 2,0 x L 02,00 4,0 2,0 0,2 2,86 2,86 3,12 3,38 3,38 3,64TA 2,2 x L 02,20 4,0 2,0 0,2 3,12 3,38 3,38 3,90 4,42 4,68TA 2,5 x L 02,50 5,0 2,0 0,3 3,12 3,38 3,38 3,90 4,16 4,68TA 2,7 x L 02,70 5,0 2,0 0,3 3,38 3,38 3,64 4,16 4,42 4,94TA 3,0 x L 03,00 6,0 3,0 0,3 2,60 2,86 2,86 3,12 3,38 3,90 4,68 5,46TA 3,2 x L 03,20 6,0 3,0 0,3 3,12 3,38 3,64 3,90 4,16 4,68 5,20TA 3,5 x L 03,50 7,0 3,0 0,3 3,12 3,38 3,38 4,16 4,42 4,94 5,20TA 3,7 x L 03,70 7,0 3,0 0,3 3,38 3,90 3,90 4,42 4,68 5,72 7,02TA 4,0 x L 04,00 8,0 3,0 0,3 2,86 2,86 2,86 3,38 3,38 3,90 4,94 5,72 7,80TA 4,2 x L 04,20 8,0 3,0 0,3 3,38 3,38 3,90 4,42 4,68 5,46 6,76TA 4,5 x L 04,50 8,0 3,0 0,3 3,64 3,90 3,90 4,42 4,68 5,72 7,02 12,48TA 5,0 x L 05,00 10,0 3,0 0,3 2,86 3,12 3,38 3,64 4,16 4,42 5,46 6,24 7,02 10,92TA 5,2 x L 05,20 10,0 3,0 0,3 3,38 3,90 4,16 4,68 5,20 5,98 7,54 10,14TA 5,5 x L 05,50 10,0 3,0 0,3 3,90 4,16 4,42 4,68 5,46 6,24 8,06 10,66TA 6,0 x L 06,00 12,0 5,0 0,5 3,12 3,38 3,64 3,90 4,42 4,94 6,50 8,58 11,18 15,08 19,50TA 6,2 x L 06,20 12,0 5,0 0,5 4,16 4,42 4,68 5,46 6,50 7,28 9,62 11,70TA 6,5 x L 06,50 12,0 5,0 0,5 4,42 4,68 4,94 5,98 7,02 8,06 10,66 12,74TA 7,0 x L 07,00 12,0 5,0 0,5 4,68 4,94 5,20 6,24 7,28 8,06 10,92 13,52TA 8,0 x L 08,00 14,0 5,0 0,5 3,38 3,90 4,16 4,68 5,46 5,98 8,32 10,14 12,48 15,08 23,92TA 8,2 x L 08,20 14,0 5,0 0,5 5,72 5,98 6,50 7,54 8,32 9,88 12,74 16,12 20,02TA 8,5 x L 08,50 14,0 5,0 0,5 5,98 6,24 6,76 7,80 8,84 10,14 13,52 16,90 20,80TA 9,0 x L 09,00 14,0 5,0 0,5 6,24 6,76 7,02 8,06 9,10 10,66 14,04 17,42 21,84TA 10,0 x L 10,00 16,0 5,0 0,5 4,42 4,68 5,20 6,50 7,28 8,32 11,96 15,08 18,20 22,36 23,40TA 10,2 x L 10,20 16,0 5,0 0,5 7,28 7,54 8,32 9,88 11,18 13,00 16,64 20,28 24,96TA 10,5 x L 10,50 16,0 5,0 0,5 8,06 8,32 8,84 10,66 11,96 13,52 18,20 22,10 27,30TA 11,0 x L 11,00 16,0 5,0 0,5 8,32 8,84 9,36 11,18 12,48 14,30 18,98 23,14 28,60TA 12,0 x L 12,00 18,0 7,0 0,8 5,72 6,76 7,54 9,36 11,44 12,48 16,12 20,28 24,96 32,24 36,92TA 12,2 x L 12,20 18,0 7,0 0,8 7,02 8,58 9,62 10,92 12,22 14,04 18,98 26,52 31,98TA 12,5 x L 12,50 18,0 7,0 0,8 7,02 8,58 9,62 10,92 12,22 14,04 18,98 24,44 29,12TA 14,0 x L 14,00 22,0 7,0 0,8 8,06 10,40 10,66 12,48 13,78 15,08 20,54 25,48 31,72 37,44 46,80TA 16,0 x L 16,00 22,0 7,0 0,8 9,36 11,18 11,96 14,30 16,38 18,46 23,40 30,42 40,04 53,56 65,78TA 18,0 x L 18,00 24,0 7,0 0,8 12,74 15,86 20,28 24,44 28,08 33,80 47,58 61,88 74,88 137,80 189,28TA 20,0 x L 20,00 26,0 8,0 1,0 8,84 11,18 14,04 19,50 22,62 27,04 38,48 49,14 60,32 76,44 127,40TA 25,0 x L 25,00 32,0 10,0 1,0 26,52 28,60 29,64 32,50 39,26 45,50 55,12 70,46 87,36 119,60 186,68

Type TADIN 1530 ISO 6751

E N A 0 5 0 1 , 5 0 0 1 0 0

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530/ISO6751Mat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Ejector Pins - Bath Nitrided

+20

0-0,2

0-0,05

+0,20


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

4

- 6 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

d1g6

d2 K R L

0040 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1000

AH 1,5 x L

EAH28

01,50 3,0 1,5 0,2 2,86 2,86 2,86 2,86 3,12 3,38 4,42 5,72AH 1,6 x L 01,60 3,0 1,5 0,2 2,60 2,60 2,60 2,60 3,12 3,38 4,16AH 1,7 x L 01,70 3,0 1,5 0,2 2,60 3,12 3,38 4,16AH 1,8 x L 01,80 3,0 1,5 0,2 2,60 3,12 3,38 4,16AH 2,0 x L 02,00 4,0 2,0 0,2 2,08 2,08 2,34 2,34 2,60 3,12 3,64 4,94 6,24AH 2,1 x L 02,10 4,0 2,0 0,2 3,38AH 2,2 x L 02,20 4,0 2,0 0,2 2,34 2,60 2,86 3,12 3,90 4,94 6,24AH 2,5 x L 02,50 5,0 2,0 0,3 2,08 2,08 2,34 2,34 2,60 3,38 3,64 4,94 6,24AH 2,7 x L 02,70 5,0 2,0 0,3 2,60 2,60 3,12 3,38 4,16 5,72 6,50AH 3,0 x L 03,00 6,0 3,0 0,3 2,08 2,08 2,34 2,86 2,86 3,12 3,64 4,94 5,20 6,50 7,54AH 3,1 x L 03,10 6,0 3,0 0,3 3,64AH 3,2 x L 03,20 6,0 3,0 0,3 2,60 2,86 2,86 3,12 3,90 5,46 6,50 7,02AH 3,5 x L 03,50 7,0 3,0 0,3 2,34 2,60 2,60 2,86 3,12 3,90 5,20 6,50 7,02AH 3,7 x L 03,70 7,0 3,0 0,3 2,60 2,86 2,86 3,12 3,90 5,46 6,50 7,02AH 4,0 x L 04,00 8,0 3,0 0,3 2,08 2,08 2,34 2,60 2,60 3,12 3,90 4,94 5,72 6,76 8,06AH 4,1 x L 04,10 8,0 3,0 0,3 3,90AH 4,2 x L 04,20 8,0 3,0 0,3 2,86 2,86 3,12 3,12 3,38 4,16 5,72 6,76 8,32AH 4,5 x L 04,50 8,0 3,0 0,3 2,86 2,86 3,12 3,38 4,16 6,24 7,28 7,80AH 4,7 x L 04,70 8,0 3,0 0,3 2,86 3,12 3,38 3,90 4,68 6,24 7,28 7,80AH 5,0 x L 05,00 10,0 3,0 0,3 2,34 2,34 2,60 2,60 3,64 3,90 4,16 5,98 7,28 7,80 8,58 9,88 18,72AH 5,1 x L 05,10 10,0 3,0 0,3 5,46AH 5,2 x L 05,20 10,0 3,0 0,3 3,38 3,38 3,38 3,90 4,68 6,50 7,54 9,62 13,00AH 5,5 x L 05,50 10,0 3,0 0,3 3,38 3,38 3,90 4,68 6,50 8,06 9,62 13,00AH 6,0 x L 06,00 12,0 5,0 0,5 2,60 2,60 2,86 3,12 3,38 3,90 4,68 6,24 7,28 9,10 11,44 14,04 17,94AH 6,1 x L 06,10 12,0 5,0 0,5 7,02AH 6,2 x L 06,20 12,0 5,0 0,5 3,64 3,90 4,16 4,94 6,24 9,10 9,88 11,70 15,08 17,42AH 6,5 x L 06,50 12,0 5,0 0,5 3,38 4,16 4,94 6,24 8,58 9,62 11,70 15,08AH 7,0 x L 07,00 12,0 5,0 0,5 3,38 4,16 4,94 6,24 8,58 9,62 11,70 15,08 17,42AH 8,0 x L 08,00 14,0 5,0 0,5 3,12 3,12 3,38 3,38 4,16 4,94 6,24 7,80 10,40 10,66 13,52 16,12 20,02 26,26AH 8,1 x L 08,10 14,0 5,0 0,5 9,62AH 8,2 x L 08,20 14,0 5,0 0,5 5,20 5,20 5,20 5,72 6,50 8,32 11,18 14,04 15,34 17,94 24,44 29,12AH 8,5 x L 08,50 14,0 5,0 0,5 6,50 5,46 6,24 7,02 9,10 11,44 13,00 14,82 18,72 23,14AH 9,0 x L 09,00 14,0 5,0 0,5 5,46 6,24 7,02 9,10 11,44 13,00 14,82 18,72 23,14AH 10,0 x L 10,00 16,0 5,0 0,5 3,90 4,68 4,68 6,50 7,54 8,84 8,84 11,44 14,30 18,20 23,14 27,56 32,50AH 10,1 x L 10,10 16,0 5,0 0,5 11,96AH 10,2 x L 10,20 16,0 5,0 0,5 6,24 6,76 7,28 8,58 10,66 14,04 16,64 21,84 26,78 32,76AH 10,5 x L 10,50 16,0 5,0 0,5 6,76 7,28 8,58 10,66 14,04 16,64 22,10 24,44 33,02AH 11,0 x L 11,00 16,0 5,0 0,5 8,32 9,36 10,40 13,00 16,12 19,24 24,96 30,16 37,96AH 12,0 x L 12,00 18,0 7,0 0,8 4,68 5,72 5,98 7,28 8,32 10,66 12,48 14,56 22,36 27,82 33,80 40,30 45,24AH 12,1 x L 12,10 18,0 7,0 0,8 13,26AH 12,2 x L 12,20 18,0 7,0 0,8 8,32 9,36 10,40 13,00 16,38 19,24 25,48 32,76AH 12,5 x L 12,50 18,0 7,0 0,8 7,54 8,84 9,62 11,96 15,08 18,46 25,48 29,64 39,52AH 14,0 x L 14,00 22,0 7,0 0,8 5,72 7,02 9,10 11,18 13,26 17,16 20,28 28,08 33,80 42,90 50,96 62,40AH 16,0 x L 16,00 22,0 7,0 0,8 10,14 10,66 11,44 14,82 16,38 21,58 26,00 31,98 40,30 53,82 72,28 88,14AH 18,0 x L 18,00 24,0 7,0 0,8 15,08 18,72 23,14 28,60 38,48 46,54 61,36 79,30 87,88AH 20,0 x L 20,00 26,0 8,0 1,0 9,62 13,52 19,24 25,22 33,28 43,16 58,24 72,80 88,66 115,18 166,14

Type AHDIN 1530 ISO 6751

E A H 2 8 0 1 , 5 0 0 0 4 0

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530/ISO6751Mat.: WS (~1.2067)Max. Temp: 250°CSurface roughness: Ra

Ejector Pins - Hardened

+20

0-0,2

0-0,05

+0,20

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 6 -

1/02

/200

7

- 7 -www.dme.net

1/02

/200

7

a Milacron Company

REF Itemprefix

d1g6

d2 K R L

0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1000

AHX 1,0 x L

ERA05

01,00 3,0 1,5 0,2 5,46 5,98 5,98 6,50AHX 1,5 x L 01,50 3,0 1,5 0,2 5,46 5,98 5,62 6,08AHX 2,0 x L 02,00 4,0 2,0 0,2 3,90 3,90 4,16 4,42 4,68 5,20AHX 2,2 x L 02,20 4,0 2,0 0,2 4,16 4,42 4,68 5,20AHX 2,5 x L 02,50 5,5 2,0 0,3 4,42 4,68 4,94 5,46 5,98 6,76AHX 2,7 x L 02,70 5,5 2,0 0,3 4,42 4,68 4,94 5,46 5,98AHX 3,0 x L 03,00 6,0 3,0 0,3 3,38 3,64 3,90 3,90 4,42 4,94 5,46 5,98 6,50AHX 3,2 x L 03,20 6,0 3,0 0,3 4,42 4,47 4,94 5,46 5,98 6,76 7,28AHX 3,5 x L 03,50 7,0 3,0 0,3 4,68 4,94 5,20 5,72 6,24 6,76 7,54AHX 3,7 x L 03,70 7,0 3,0 0,3 4,94 5,46 5,72 6,24 7,02 7,54 8,32AHX 4,0 x L 04,00 8,0 3,0 0,3 3,38 3,90 3,90 4,16 4,68 4,94 5,46 5,98 6,76AHX 4,2 x L 04,20 8,0 3,0 0,3 4,68 4,68 5,20 5,46 5,98 6,50 7,28 8,58AHX 4,5 x L 04,50 8,0 3,0 0,3 5,20 5,46 5,46 6,24 6,76 7,80 9,36AHX 5,0 x L 05,00 10,0 3,0 0,3 3,90 4,16 4,42 4,68 4,94 5,72 5,98 7,80 10,14 13,00 16,90AHX 5,2 x L 05,20 10,0 3,0 0,3 5,20 5,46 5,72 6,50 7,28 8,06 9,36 10,66AHX 5,5 x L 05,50 10,0 3,0 0,3 5,46 5,72 5,98 6,76 7,54 8,58 10,40 12,48AHX 6,0 x L 06,00 12,0 5,0 0,5 4,16 4,16 4,68 4,94 5,46 6,24 7,02 9,10 11,70 15,08AHX 6,2 x L 06,20 12,0 5,0 0,5 5,72 5,98 6,50 7,54 9,10 10,14 11,96 14,30 17,16AHX 6,5 x L 06,50 12,0 5,0 0,5 5,98 6,76 7,02 8,32 9,88 11,18 13,26 15,86AHX 7,0 x L 07,00 14,0 5,0 0,5 6,50 7,02 7,54 8,58 10,14 11,44 13,52 16,38 19,50AHX 7,5 x L 07,50 14,0 5,0 0,5 8,06 8,32 8,84 10,40 11,70 13,78 16,12 18,72AHX 8,0 x L 08,00 14,0 5,0 0,5 4,68 5,46 5,98 6,76 7,80 8,58 11,70 14,30 17,42 20,80 24,96AHX 8,2 x L 08,20 14,0 5,0 0,5 8,06 8,58 8,84 10,40 11,70 13,78 16,38 19,76 23,66 28,34AHX 8,5 x L 08,50 14,0 5,0 0,5 8,32 8,84 9,36 10,66 12,48 14,30 17,16 20,54 24,70AHX 9,0 x L 09,00 14,0 5,0 0,5 8,84 9,10 9,88 11,18 12,74 14,82 17,94 21,32 25,74AHX 9,5 x L 09,50 14,0 5,0 0,5 10,92 11,96 13,26 14,82 16,90 19,50 23,40 28,08AHX 10,0 x L 10,00 16,0 5,0 0,5 5,98 6,76 7,54 9,10 10,14 11,44 16,90 21,06 25,74 30,68 36,92AHX 10,2 x L 10,20 16,0 5,0 0,5 10,14 10,66 11,70 13,78 15,60 18,20 23,40 28,08 33,80 40,30AHX 10,5 x L 10,50 16,0 5,0 0,5 11,18 11,70 12,48 14,82 16,90 18,98 25,22 30,42AHX 11,0 x L 11,00 16,0 5,0 0,5 11,70 12,22 13,26 15,60 17,68 20,02 26,78 33,28 41,86AHX 12,0 x L 12,00 18,0 7,0 0,8 8,06 9,36 10,66 13,00 15,86 17,42 22,62 28,60 35,10 42,12 50,44AHX 12,2 x L 12,20 18,0 7,0 0,8 9,88 11,96 13,52 15,08 17,16 19,76 26,78 33,28 41,60 52,00AHX 12,5 x L 12,50 18,0 7,0 0,8 9,88 11,96 13,52 15,08 17,16 19,76 26,78 33,28 41,60 52,00AHX 14,0 x L 14,00 22,0 7,0 0,8 11,18 14,56 15,08 17,42 19,50 21,32 29,12 35,62 44,72 55,90 69,94AHX 16,0 x L 16,00 22,0 7,0 0,8 13,00 15,86 16,64 20,02 23,14 26,00 33,02 42,64 55,90 69,94 87,10AHX 18,0 x L 18,00 24,0 7,0 0,8 18,46 22,88 28,60 34,32 39,52 47,58 66,82 83,72 104,52 130,78 163,54AHX 20,0 x L 20,00 26,0 8,0 1,0 18,46 16,90 20,02 27,30 31,98 37,96 53,82 68,38 85,02 106,86 178,62AHX 25,0 x L 25,00 32,0 10,0 1,0 38,22 45,50 55,12 63,96 78,00 99,06 123,76 168,22 261,56AHX 32,0 x L 32,00 40,0 10,0 1,0 77,22 86,84 98,28 129,74 162,24 199,16 258,18 411,06

Type AHXDIN 1530 ISO 6751

E R A 0 5 0 1 , 0 0 0 1 2 5

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530/ISO6751Mat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Core Pins - Hardened

+20

0-0,2

0-0,05

+0,20

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 8 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

d1 d2 K R L

0100 0160 0250 0315

PCM 01,5 x L

PCM

01,50 3,0 1,5 0,2 22,88 23,40PCM 02,0 x L 02,00 4,0 2,0 0,2 22,88 23,40 28,86PCM 02,5 x L 02,50 5,0 2,0 0,3 20,80 22,10 28,86PCM 03,0 x L 03,00 6,0 3,0 0,3 19,76 21,58 28,86PCM 03,5 x L 03,50 7,0 3,0 0,3 18,72 20,54 28,60PCM 04,0 x L 04,00 8,0 3,0 0,3 21,06 22,10 26,52 28,86PCM 04,5 x L 04,50 8,0 3,0 0,3 21,06 22,10 26,52PCM 05,0 x L 05,00 10,0 3,0 0,3 21,06 22,10 28,86PCM 06,0 x L 06,00 12,0 5,0 0,5 23,66 24,70 27,82 28,86PCM 07,0 x L 07,00 12,0 5,0 0,5 23,66 24,70 28,60PCM 08,0 x L 08,00 14,0 5,0 0,5 23,66 28,60 36,92 39,26PCM 10,0 x L 10,00 16,0 5,0 0,5 32,50 39,26 54,08 61,88PCM 12,0 x L 12,00 18,0 7,0 0,8 43,42 53,30 62,66 71,76PCM 14,0 x L 14,00 22,0 7,0 0,8 43,42 53,30 65,26 71,76PCM 16,0 x L 16,00 22,0 7,0 0,8 43,42 53,30 65,26 71,76

High thermal conductivity pins

Advantages:• Reduced cycle time• 5 times better conductivity than steel• Improved part quality• Lower machining costs• Longer service life

Type PCMDIN 1530 ISO 6751

P C M 0 1 5 1 0 0

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530/ISO6751Mat.: AMPCO 940Max. Temp: 350°CSurface roughness: Ra

Performance Core Pins

+20

0-0,2

0-0,05

+0,20

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

+0,025 0

- 8 -

1/02

/200

7

- 9 -www.dme.net

1/02

/200

7

a Milacron Company

Type CDIN 1530 ISO 8694

E P C 0 5 0 1 , 0 0 0 1 0 0 *

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head ød3= Shoulder øK= Head thicknessL1 = Total lengthL2 = Shoulder length + head thicknessStandard: DIN1530/ISO8694Mat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Ejector Pins - Nitrided

REF Itemprefix

d1g6

d2 d3 K R L1

0080 0100 0125 0160 0160 0160 0200 0250 0250

L2

0035 0050 0050 0050 0063 0075 0075 0075 0100

C 0,7 x L1

EPC05

0,700 4,0 2,0 2,0 0,2 10,14 11,18C 0,8 x L1 0,800 4,0 2,0 2,0 0,2 10,14 10,14 11,18 11,96 11,96C 0,9 x L1 0,900 4,0 2,0 2,0 0,2 10,14 10,40 11,18 11,96 11,96C 1,0 x L1 01,00 4,0 2,0 2,0 0,2 9,62 9,88 10,66 11,18 11,18 11,18 11,70C 1,1 x L1 01,10 4,0 2,0 2,0 0,2 9,62 9,88 10,40 10,92 10,92 11,44C 1,2 x L1 01,20 4,0 2,0 2,0 0,2 9,62 9,88 10,40 10,92 10,92 11,44C 1,3 x L1 01,30 4,0 2,0 2,0 0,2 9,10 9,36 9,88 10,40 10,40 11,44C 1,4 x L1 01,40 4,0 2,0 2,0 0,2 9,10 9,36 9,88 10,40 10,40 11,44C 1,5 x L1 01,50 6,0 3,0 3,0 0,3 8,32 8,32 9,10 9,62 9,62 9,62 10,40 11,18 11,18C 1,6 x L1 01,60 6,0 3,0 3,0 0,3 7,80 7,80 8,06 8,84 8,84 9,62C 1,7 x L1 01,70 6,0 3,0 3,0 0,3 7,80 7,80 8,06 8,84 8,84 9,62C 1,8 x L1 01,80 6,0 3,0 3,0 0,3 7,80 7,80 8,06 8,84 8,84 9,62C 1,9 x L1 01,90 6,0 3,0 3,0 0,3 7,80 7,80 8,06 8,84 8,84 9,62C 2,0 x L1 02,00 6,0 3,0 3,0 0,3 7,28 7,54 8,32 8,84 8,84 8,84 9,36 11,18 11,18C 2,1 x L1 02,10 6,0 3,0 3,0 0,3 7,80 7,80 8,32 8,84 8,84 9,36C 2,2 x L1 02,20 6,0 3,0 3,0 0,3 7,80 7,80 8,32 8,84 8,84 9,36C 2,3 x L1 02,30 6,0 3,0 3,0 0,3 7,80 7,80 8,32 8,84 8,84 9,36C 2,4 x L1 02,40 6,0 3,0 3,0 0,3 7,80 7,80 8,32 8,84 8,84 9,36C 2,5 x L1 02,50 6,0 3,0 3,0 0,3 6,76 7,54 8,06 8,06 8,06 8,58 8,06 8,06C 2,6 x L1 02,60 6,0 3,0 3,0 0,3 6,76 7,54 8,06 8,06 8,58C 2,7 x L1 02,70 6,0 3,0 3,0 0,3 6,76 7,54 8,06 8,06 8,58C 2,8 x L1 02,80 6,0 3,0 3,0 0,3 6,76 7,54 8,06 8,06 8,58C 2,9 x L1 02,90 6,0 3,0 3,0 0,3 6,76 7,54 8,06 8,06 8,58C 3,0 x L1 03,00 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62C 3,1 x L1 03,10 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62C 3,2 x L1 03,20 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62C 3,3 x L1 03,30 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62C 3,4 x L1 03,40 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62C 3,5 x L1 03,50 8,0 4,0 3,0 0,3 7,80 8,06 8,84 8,84 9,62

+20

0-0,2

0-0,05

+0,20

-1-2

h11

4

* For L1 0160 & 0250 add (5), (6), (7) for L2


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 10 - www.dme.net

1/02

/200

7


1/02

/200

7

Type TCDIN 1530 ISO 8694

E N C 0 5 0 1 , 0 0 0 1 0 0 *

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head ød3= Shoulder øK= Head thicknessL1 = Total lengthL2 = Shoulder length + head thicknessStandard: DIN1530/ISO8694Mat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Ejector Pins - Bath Nitrided

REF Itemprefix

d1g6

d2 d3 K R L1

0080 0100 0125 0160 0160 0160 0200 0250 0250

L2

0035 0050 0050 0050 0063 0075 0075 0075 0100

TC 0,7 x L1 - L2

ENC05

0,700 4,0 2,0 2,0 0,2 9,10 10,14TC 0,8 x L1 - L2 0,800 4,0 2,0 2,0 0,2 9,10 9,10 10,14 10,92 10,92TC 0,9 x L1 - L2 0,900 4,0 2,0 2,0 0,2 9,10 9,10 10,14 10,92 10,92TC 1,0 x L1 - L2 01,00 4,0 2,0 2,0 0,2 8,84 8,84 9,62 10,14 10,14 10,14 10,66TC 1,1 x L1 - L2 01,10 4,0 2,0 2,0 0,2 8,84 8,84 9,36 9,88 9,88 10,40TC 1,2 x L1 - L2 01,20 4,0 2,0 2,0 0,2 8,84 8,84 9,36 9,88 9,88 10,40TC 1,3 x L1 - L2 01,30 4,0 2,0 2,0 0,2 8,32 8,58 8,84 9,36 9,36 10,40TC 1,4 x L1 - L2 01,40 4,0 3,0 2,0 0,2 8,32 8,58 8,84 9,36 9,36 10,40TC 1,5 x L1 - L2 01,50 6,0 3,0 3,0 0,3 7,54 7,54 8,32 8,84 8,84 8,84 9,36 10,14 10,14TC 1,6 x L1 - L2 01,60 6,0 3,0 3,0 0,3 7,02 7,02 7,28 8,06 8,06 8,84TC 1,7 x L1 - L2 01,70 6,0 3,0 3,0 0,3 7,02 7,02 7,28 8,06 8,06 8,84TC 1,8 x L1 - L2 01,80 6,0 3,0 3,0 0,3 7,02 7,02 7,28 8,06 8,06 8,84TC 1,9 x L1 - L2 01,90 6,0 3,0 3,0 0,3 7,02 7,02 7,28 8,06 8,06 8,84TC 2,0 x L1 - L2 02,00 6,0 3,0 3,0 0,3 6,50 6,76 7,54 8,06 8,06 8,06 8,58 10,14 10,14TC 2,1 x L1 - L2 02,10 6,0 3,0 3,0 0,3 7,02 7,02 7,54 8,06 8,06 8,58TC 2,2 x L1 - L2 02,20 6,0 3,0 3,0 0,3 7,02 7,02 7,54 8,06 8,06 8,58TC 2,3 x L1 - L2 02,30 6,0 3,0 3,0 0,3 7,02 7,02 7,54 8,06 8,06 8,58TC 2,4 x L1 - L2 02,40 6,0 3,0 3,0 0,3 7,02 7,02 7,54 8,06 8,06 8,58TC 2,5 x L1 - L2 02,50 6,0 3,0 3,0 0,3 7,02 7,28 8,06 8,06 8,06 8,84 8,84 8,84TC 2,6 x L1 - L2 02,60 6,0 3,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 2,7 x L1 - L2 02,70 6,0 3,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 2,8 x L1 - L2 02,80 6,0 3,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 2,9 x L1 - L2 02,90 6,0 3,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,0 x L1 - L2 03,00 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,1 x L1 - L2 03,10 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,2 x L1 - L2 03,20 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,3 x L1 - L2 03,30 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,4 x L1 - L2 03,40 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84TC 3,5 x L1 - L2 03,50 8,0 4,0 3,0 0,3 7,02 7,28 8,06 8,06 8,84

+20

0-0,2

0-0,05

+0,20

-1-2

h11

4

* For L1 0160 & 0250 add (5), (6), (7) for L2


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 10 -

1/02

/200

7

- 11 -www.dme.net

1/02

/200

7

a Milacron Company

Type CHDIN 1530 ISO 8694

C H E 2 8 0 1 , 0 0 0 1 0 0 *

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head ød3= Shoulder øK= Head thicknessL1 = Total lengthL2 = Shoulder length + head thicknessStandard: DIN1530/ISO8694Mat.: WS (~1.2067)Max. Temp: 250°CSurface roughness: Ra


REF Itemprefix

d1g6

d2 d3 K R L1

0063 0080 0100 0125 0160 0160 0160 0200 0250 0250

L2

0025 0035 0050 0050 0050 0063 0075 0075 0075 0100

CH 0,5 x L1 - L2

CHE28

00,50 4,0 2,0 2,0 0,2 10,40 10,40 10,92 11,70 11,70CH 0,6 x L1 - L2 00,60 4,0 2,0 2,0 0,2 9,88 9,88 10,40 11,18 11,18 11,96CH 0,7 x L1 - L2 00,70 4,0 2,0 2,0 0,2 9,88 9,88 10,40 11,18 11,18 11,96CH 0,8 x L1 - L2 00,80 4,0 2,0 2,0 0,2 9,36 8,84 9,62 10,14 10,92 10,92 11,44CH 0,9 x L1 - L2 00,90 4,0 2,0 2,0 0,2 10,41 9,62 9,62 10,14 10,92 10,92 11,44CH 1,0 x L1 - L2 01,00 4,0 2,0 2,0 0,2 8,87 8,32 8,58 8,84 9,36 9,36 9,36 10,14CH 1,1 x L1 - L2 01,10 4,0 2,0 2,0 0,2 8,87 8,58 8,58 8,84 9,36 9,36 10,14CH 1,2 x L1 - L2 01,20 4,0 2,0 2,0 0,2 8,58 8,58 8,58 8,84 9,36 9,36 10,14CH 1,3 x L1 - L2 01,30 4,0 2,0 2,0 0,2 8,87 8,58 8,58 8,84 9,36 9,36 10,14CH 1,4 x L1 - L2 01,40 4,0 2,0 2,0 0,2 8,87 8,58 8,58 8,84 9,36 9,36 10,14CH 1,5 x L1 - L2 01,50 6,0 3,0 3,0 0,3 7,78 7,28 7,28 7,80 8,58 8,58 8,58 9,62CH 1,6 x L1 - L2 01,60 6,0 3,0 3,0 0,3 7,28 7,28 7,80 8,58 8,58 9,62CH 1,7 x L1 - L2 01,70 6,0 3,0 3,0 0,3 7,28 7,28 7,80 8,58 8,58 9,62CH 1,8 x L1 - L2 01,80 6,0 3,0 3,0 0,3 7,28 7,28 7,80 8,58 8,58 9,62CH 1,9 x L1 - L2 01,90 6,0 3,0 3,0 0,3 7,28 7,28 7,80 8,58 8,58 9,62CH 2,0 x L1 - L2 02,00 6,0 3,0 3,0 0,3 6,24 6,76 7,02 7,54 7,54 7,54 8,84 9,88 9,88CH 2,1 x L1 - L2 02,10 6,0 3,0 3,0 0,3 6,24 6,76 7,02 7,54 7,54 8,84CH 2,2 x L1 - L2 02,20 6,0 3,0 3,0 0,3 6,24 6,76 7,02 7,54 7,54 8,84CH 2,3 x L1 - L2 02,30 6,0 3,0 3,0 0,3 6,24 6,76 7,02 7,54 7,54 8,84CH 2,4 x L1 - L2 02,40 6,0 3,0 3,0 0,3 6,24 6,76 7,02 7,54 7,54 8,84CH 2,5 x L1 - L2 02,50 6,0 3,0 3,0 0,3 4,98 5,98 6,24 7,28 7,28 7,28 8,06 9,36 9,36CH 2,6 x L1 - L2 02,60 6,0 3,0 3,0 0,3 5,98 6,24 7,28 7,28 8,06CH 2,7 x L1 - L2 02,70 6,0 3,0 3,0 0,3 5,98 6,24 7,28 7,28 8,06CH 2,8 x L1 - L2 02,80 6,0 3,0 3,0 0,3 5,98 6,24 7,28 7,28 8,06CH 2,9 x L1 - L2 02,90 6,0 3,0 3,0 0,3 5,98 6,24 7,28 7,28 8,06

+20

0-0,2

0-0,05

+0,20

-1-2

h11

4

* For L1 0160 & 0250 add (5), (6), (7) for L2


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 12 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

d1g6

d2 K L

0063 0071 0080 0100 0125 0160 0200 0250 0315

D 01,00 x L

EPD28

01,00 1,8 0,5 1,56 1,56 1,56 1,82 2,08 2,34 3,12D 01,10 x L 01,10 1,8 0,5 1,56 2,08 2,08 2,34 2,60 3,38D 01,20 x L 01,20 2,0 0,5 1,56 2,08 2,08 2,34 2,60 3,38D 01,25 x L 01,25 2,0 0,5 2,08 2,08 2,34 2,60 3,38D 01,30 x L 01,30 2,0 0,5 1,56 1,82 2,08 2,34 2,60 3,38D 01,40 x L 01,40 2,2 0,5 1,56 1,82 2,08 2,34 2,60 3,38D 01,50 x L 01,50 2,2 0,5 1,56 1,56 1,56 1,82 2,08 2,34 3,12 3,90D 01,60 x L 01,60 2,5 0,5 2,08 2,08 2,34 2,60 2,86 3,64D 01,70 x L 01,70 2,5 0,5 2,08 2,08 2,34 2,60 2,86 3,64D 01,75 x L 01,75 2,8 0,5 2,08 2,34 2,60 2,86 3,64D 01,80 x L 01,80 2,8 0,5 2,08 2,08 2,34 2,60 2,86 3,64D 01,90 x L 01,90 2,8 0,5 2,08 2,08 2,34 2,60 2,86 3,64D 02,00 x L 02,00 3,0 0,5 1,82 1,56 1,82 1,82 2,08 2,60 3,12 3,90 4,94D 02,10 x L 02,10 3,2 0,5 2,34 2,60 2,86 3,64D 02,20 x L 02,20 3,2 0,5 2,34 2,60 2,86 3,64 4,42D 02,25 x L 02,25 3,5 0,5 1,82 2,34 2,60 2,86 3,64D 02,30 x L 02,30 3,5 0,5 2,34 2,60 2,86 3,64D 02,40 x L 02,40 3,5 0,5 2,34 2,60 2,86 3,64D 02,50 x L 02,50 3,5 0,5 1,82 1,82 2,08 2,34 3,12 3,90D 02,60 x L 02,60 4,0 0,5 2,34 2,60 2,86 3,64D 02,70 x L 02,70 4,0 0,5 2,08 2,34 2,60 2,86 3,64 4,94D 02,75 x L 02,75 4,0 0,5 2,08 2,34 2,60 2,86 3,64D 02,80 x L 02,80 4,0 0,5 2,34 2,60 2,86 3,64D 02,90 x L 02,90 4,0 0,5 2,34 2,60 2,86 3,64D 03,00 x L 03,00 4,5 0,5 1,56 1,82 1,82 1,82 2,08 2,60 3,12 4,42 5,46D 03,10 x L 03,10 4,5 0,5 2,60 2,86 3,12 3,90D 03,20 x L 03,20 4,5 0,5 2,60 2,86 3,12 3,90D 03,25 x L 03,25 4,5 0,5 1,82 2,60 2,86 3,12 3,90D 03,30 x L 03,30 4,5 0,5 2,60 2,86 3,12 3,90D 03,40 x L 03,40 4,5 0,5 2,60 2,86 3,12 3,90D 03,50 x L 03,50 5,0 0,5 1,82 1,82 1,82 2,34 2,60 3,38 4,68 7,02D 03,60 x L 03,60 5,0 0,5 2,60 2,86 3,12 3,90D 03,70 x L 03,70 5,0 0,5 1,82 2,60 2,86 3,12 3,90D 03,75 x L 03,75 5,0 0,5 3,38 2,60 2,86 3,12 3,90D 03,80 x L 03,80 5,0 0,5 2,60 2,86 3,12 3,90D 03,90 x L 03,90 5,0 0,5 2,60 2,86 3,12 3,90D 04,00 x L 04,00 5,5 0,5 1,82 1,56 1,82 2,08 2,60 3,38 4,68 5,46D 04,10 x L 04,10 5,5 0,5 2,86 3,12 3,64 4,42D 04,20 x L 04,20 5,5 0,5 2,86 3,12 3,64 4,42D 04,25 x L 04,25 5,5 0,5 2,86 3,12 3,64 4,42D 04,40 x L 04,40 5,5 0,5 2,86 3,12 3,64 4,42D 04,50 x L 04,50 6,06 0,5 1,82 2,08 2,60 2,86 3,64 4,68D 04,60 x L 04,60 6,0 0,5 2,86 3,12 3,64 4,42D 04,75 x L 04,75 6,0 0,5 2,86 3,12 3,64 4,42D 05,00 x L 05,00 6,5 0,5 1,82 1,82 1,82 2,08 2,60 2,86 3,64 4,68 5,98D 05,10 x L 05,10 6,5 0,5 3,12 3,38 4,16 4,94D 05,20 x L 05,20 6,5 0,5 3,12 3,38 4,16 4,94D 05,25 x L 05,25 6,5 0,5 3,12 3,38 4,16 4,94

Type DDIN 1530

E P D 2 8 0 1 , 5 0 0 1 0 0

Prefix d1 L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530Mat.: WS (~1.2067)Max. Temp: 250°CSurface roughness: Ra


+20

0-0,2

+0,20

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 12 -

1/02

/200

7

- 13 -www.dme.net

1/02

/200

7

a Milacron Company

REF Itemprefix

d1g6

d2 K L

0063 0071 0080 0100 0125 0160 0200 0250 0315

D 05,30 x L

EPD28

05,30 6,5 0,5 3,12 3,38 4,16 4,94D 05,40 x L 05,40 6,5 0,5 3,12 3,38 4,16 4,94D 05,50 x L 05,50 7,0 0,5 2,08 2,08 2,60 3,12 3,38 4,68 5,98 7,09D 05,60 x L 05,60 7,0 0,5 3,12 3,56 4,16 4,94D 05,75 x L 05,75 7,0 0,5 3,12 3,38 5,20 5,46D 06,00 x L 06,00 8,0 0,5 2,08 2,08 2,08 2,60 3,12 3,64 4,68 8,32 6,76D 06,20 x L 06,20 8,0 0,5 3,90 4,94 5,72 7,54 8,06 9,10D 06,50 x L 06,50 9,0 1,0 3,64 4,42 5,20 6,76 7,54 9,10D 07,00 x L 07,00 9,0 1,0 2,60 2,86 2,86 3,64 4,94 5,98 8,06 8,32D 07,50 x L 07,50 10,0 1,0 3,64 4,42 5,20 6,76 7,02 9,10D 08,00 x L 08,00 10,0 1,0 2,34 2,60 2,60 3,12 3,64 4,42 5,72 11,18 9,10D 08,20 x L 08,20 10,0 1,0 5,46 6,24 7,80 9,88 11,18 13,00D 08,50 x L 08,50 11,0 1,0 5,46 6,50 7,54 9,62 11,18 13,00D 09,00 x L 09,00 11,0 1,0 4,42 4,68 5,46 6,24 7,28 9,62 11,18 13,00D 10,00 x L 10,00 12,0 1,0 3,64 3,64 3,90 4,16 4,95 5,72 7,54 9,10 10,40D 11,00 x L 11,00 13,0 1,0 5,72 9,36 10,92 11,44D 12,00 x L 12,00 14,0 1,0 5,20 4,94 5,46 6,50 8,06 10,14 10,92 13,52D 14,00 x L 14,00 16,0 1,5 5,98 7,28 8,84 10,66 12,74 15,60 18,72D 16,00 x L 16,00 18,0 1,5 9,10 9,62 11,18 12,74 15,60 20,28 23,92

Type DDIN 1530

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthStandard: DIN1530Mat.: WS (~1.2067)Max. Temp: 250°CSurface roughness: Ra


+20

0-0,2

+0,20

E P D 2 8 0 5 , 3 0 0 1 0 0

Prefix d1 L

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 14 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

R1 R2 K d2 d1 a b L1

63 80 100 125 160 200 250 315 400

L2

32 40 50 63 80 100 125 160 200

FW 0,8-3,5 - L1

FW

0,3 10 3 8 4 0,8 3,5 11,44 13,26 14,30 15,60FW 1,0-3,5 - L1 0,3 10 3 8 4 1,0 3,5 16,38 18,20 20,02 25,74FW 1,2-3,5 - L1 0,3 10 3 8 4 1,2 3,5 17,16 19,24 21,06 24,96FW 0,8-3,8 - L1 0,3 10 3 8 4 0,8 3,8 19,76 21,58 25,22 26,26FW 1,0-3,8 - L1 0,3 10 3 8 4,2 1,0 3,8 16,38 18,20 20,02 21,58 23,14FW 1,2-3,8 - L1 0,3 10 3 8 4,2 1,2 3,8 15,86 17,68 19,50 20,80 23,14 25,22FW 1,0-4,5 - L1 0,3 10 3 10 5 1,0 4,5 19,76 23,66 28,86 34,58 37,96FW 1,2-4,5 - L1 0,3 10 3 10 5 1,2 4,5 17,94 23,40 28,34 33,80 40,82FW 1,5-4,5 - L1 0,3 10 3 10 5 1,5 4,5 21,06 22,36 27,30 32,76 36,92FW 1,6-4,5 - L1 0,3 10 3 10 5 1,6 4,5 20,80 21,84 26,78 32,24 36,14FW 1,8-4,5 - L1 0,3 10 3 10 5 1,8 4,5 20,28 21,58 26,00 31,46 35,36FW 1,0-5,5 - L1 0,5 10 5 12 6 1,0 5,5 21,32 27,04 32,50 37,96 41,86FW 1,2-5,5 - L1 0,5 10 5 12 6 1,2 5,5 20,28 26,78 32,24 37,44 42,90FW 1,5-5,5 - L1 0,5 10 5 12 6 1,5 5,5 21,58 25,74 31,46 36,66 39,00FW 1,6-5,5 - L1 0,5 10 5 12 6 1,6 5,5 24,96 30,94 36,14 38,22FW 1,8-5,5 - L1 0,5 10 5 12 6 1,8 5,5 30,16 35,36 37,44FW 2,0-5,5 - L1 0,5 10 5 12 6 2,0 5,5 26,26 29,64 35,62 37,70 41,08FW 1,2-7,5 - L1 0,5 10 5 14 8 1,2 7,5 35,88 42,38 48,36 54,34 59,02FW 1,5-7,5 - L1 0,5 10 5 14 8 1,5 7,5 41,86 47,58 53,04 57,46FW 1,6-7,5 - L1 0,5 10 5 14 8 1,6 7,5 41,08 46,54 52,00 56,16FW 1,8-7,5 - L1 0,5 10 5 14 8 1,8 7,5 45,76 50,96 54,86FW 2,0-7,5 - L1 0,5 10 5 14 8 2,0 7,5 45,24 50,70 55,12 59,28FW 1,5-9,5 - L1 0,5 10 5 16 10 1,5 9,5 63,18 71,50 80,86 96,98FW 1,8-9,5 - L1 0,5 10 5 16 10 1,8 9,5 68,64 77,48 93,34FW 2,0-9,5 - L1 0,5 10 5 16 10 2,0 9,5 68,90 78,26 93,86 107,12FW 2,0-11,5 - L1 0,8 10 7 18 12 2,0 11,5 81,00 104,52 120,64 151,06FW 2,5-11,5 - L1 0,8 10 7 18 12 2,5 11,5 79,82 99,84 115,96 145,34FW 2,0-12,0 - L1 0,8 10 7 18 12,5 2,0 12,0 91,52 113,88 131,56 164,58FW 2,5-12,0 - L1 0,8 10 7 18 12,5 2,5 12,0 86,84 108,94 126,36 158,08FW 2,0-15,0 - L1 0,8 10 7 22 16 2,0 15,0 99,84 124,02 143,52 179,14FW 2,5-15,0 - L1 0,8 10 7 22 16 2,5 15,0 94,90 118,56 137,80 172,38FW 2,0-15,5 - L1 0,8 10 7 22 16 2,0 15,5 107,12 133,38 153,92 192,14FW 2,5-15,5 - L1 0,8 10 7 22 16 2,5 15,5 100,36 127,66 148,72 108,79

Type FWDIN 1530ISO 8693

F W 0 , 8 3 , 5 6 3

Prefix a b L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL1 = Total lengthL2 = Shoulder length + head thicknessMat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Flat Ejector Pins - Nitrided

+20

0-0,2 h11

0-0,05

-1-2

0-0,015

0-0,015

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

+0,20

- 14 -

1/02

/200

7

- 15 -www.dme.net

1/02

/200

7

a Milacron Company

Type FKDIN 1530ISO 8693

F K 1 , 2 3 , 5 6 3

Prefix a b L

How To Order

Flat Ejector Pins - Hardened

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthMat.: WS (~1.2067)Max. Temp: 250°CSurface roughness: Ra

REF Itemprefix

R1 R2 K d2 d1 a b L1

63 80 100 125 160 200 250 315 400

L2

32 40 50 63 80 100 125 160 200

FK 1,0-3,5 - L1

FK

0,3 10 3 8 4 1,0 3,5 15,08 17,42 18,72 20,54 22,36FK 1,2-3,5 - L1 0,3 10 3 8 4 1,2 3,5 16,90 18,20 19,76 21,06FK 0,8-3,8 - L1 0,3 10 3 8 4,2 0,8 3,8 20,28 21,58 23,17 26,26 29,12FK 1,0-3,8 - L1 0,3 10 3 8 4,2 1,0 3,8 16,12 17,42 18,72 20,54 22,36FK 1,2-3,8 - L1 0,3 10 3 8 4,2 1,2 3,8 16,64 16,90 18,20 19,76 21,06 23,92FK 1,0-4,5 - L1 0,3 10 3 10 5 1,0 4,5 19,76 23,66 29,38 35,36 36,40FK 1,2-4,5 - L1 0,3 10 3 10 5 1,2 4,5 18,20 22,88 28,60 33,80 35,62FK 1,5-4,5 - L1 0,3 10 3 10 5 1,5 4,5 18,46 22,10 27,04 32,24 35,10FK 1,0-5,5 - L1 0,3 10 5 12 6 1,0 5,5 19,24 25,48 30,42 36,66 39,52FK 1,2-5,5 - L1 0,3 10 5 12 6 1,2 5,5 18,46 24,44 29,90 35,62 39,00FK 1,5-5,5 - L1 0,3 10 5 12 6 1,5 5,5 19,76 23,66 29,64 35,36 37,44FK 2,0-5,5 - L1 0,5 10 5 12 6 2,0 5,5 22,62 23,92 27,56 33,28 35,62FK 1,2-7,5 - L1 0,5 10 5 14 8 1,2 7,5 32,76 39,52 45,76 50,96 55,64FK 1,5-7,5 - L1 0,5 10 5 14 8 1,5 7,5 32,24 39,00 44,98 49,92 54,08FK 2,0-7,5 - L1 0,5 10 5 14 8 2,0 7,5 30,42 36,40 43,42 47,84 52,52 60,84FK 1,5-9,5 - L1 0,5 10 5 16 10 1,5 9,5 59,54 67,34 76,18 86,32FK 2,0-9,5 - L1 0,5 10 5 16 10 2,0 9,5 57,46 65,52 73,58 87,88FK 2,0-11,5 - L1 0,8 10 7 18 12 2,0 11,5 78,78 100,36 116,48 146,90FK 2,5-11,5 - L1 0,8 10 7 18 12 2,5 11,5 78,26 99,06 115,44 145,60FK 2,0-15,5 - L1 0,8 10 7 22 16 2,0 15,5 94,64 120,12 138,84 175,24FK 2,5-15,5 - L1 0,8 10 7 22 16 2,5 15,5 93,34 118,56 137,54 173,68

+20

0-0,2 h11

0-0,05

-1-2

0-0,015

0-0,015

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

+0,20

- 16 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Itemprefix

d1 d2 K L

6” 10” 10”0S 14” 14”0S 18” 18”0S 25” 36”

EX 3 - L EX 3M* 3/64” 1/4” 1/8” 5,46EX 5 - L EX 5M* 1/16” 1/4” 1/8” 5,20EX 6 - L EX 6M* 5/64” 1/4” 1/8” 5,20EX 7 - L EX 7M* 3/32” 1/4” 1/8” 4,42 5,20EX 8 - L EX 8M* 7/64” 1/4” 1/8” 5,20 4,68EX 9 - L EX 9M 1/8” 1/4” 1/8” 2,60 2,86 3,12 3,64 3,07EX 10 - L EX 10M 9/64” 1/4” 1/8” 3,12 3,37 3,90EX 11 - L EX 11M 5/32” 9/32” 5/32” 2,60 3,12 3,81 3,38 3,90 4,94EX 12 - L EX 12M 11/64” 11/32” 3/16” 3,12 4,42EX 13 - L EX 13M 3/16” 3/8” 3/16” 2,86 3,12 3,38 3,90 4,16 4,94 7,02EX 14 - L EX 14M 13/64” 3/8” 3/16” 3,38 4,16EX 15 - L EX 15M 7/32” 13/32” 3/16” 2,86 3,38 3,64 4,16 7,54EX 16 - L EX 16M 15/64” 13/32” 3/16” 3,90 4,42EX 17 - L EX 17M 1/4” 7/16” 3/16” 3,12 3,90 3,54 4,42 4,94 5,72 6,50 8,06EX 18 - L EX 18M 17/64” 7/16” 1/4” 4,16 4,68 8,58EX 19 - L EX 19M 9/32” 7/16” 1/4” 3,38 4,42 4,42 5,20 6,08 9,10EX 20 - L EX 20M 19/64” 1/2” 1/4” 4,68 5,15EX 21 - L EX 21M 5/16” 1/2” 1/4” 3,90 4,94 4,94 5,72 5,62 7,28 8,06 9,88EX 22 - L EX 22M 21/64” 9/16” 1/4” 5,20 6,50 10,66EX 23 - L EX 23M 11/32” 9/16” 1/4” 4,16 5,46 5,72 6,76 10,92EX 24 - L EX 24M 23/64” 5/8” 1/4” 5,72 7,28EX 25 - L EX 25M 3/8” 5/8” 1/4” 4,42 5,98 6,24 7,28 7,80 9,62 10,40 13,52 31,98EX 27 - L EX 27M 13/32” 11/16” 1/4” 4,94 6,76 7,02 8,32 10,92 14,04EX 29 - L EX 29M 7/16” 11/16” 1/4” 5,46 7,28 7,54 8,42 9,88 12,22 17,42 38,48EX 31 - L EX 31M 15/32” 3/4” 1/4” 8,06 8,32 13,26 19,76EX 33 - L EX 33M 1/2” 3/4” 1/4” 6,50 8,84 9,10 10,92 11,70 14,56 21,32 38,22EX 35 - L EX 35M 9/16” 13/16” 1/4” 7,80 10,40 13,26 17,16 22,36EX 37 - L EX 37M 5/8” 7/8” 1/4” 8,84 12,22 15,34 19,76 25,22 49,40EX 39 - L EX 39M 11/16” 15/16” 1/4” 9,62 14,30 21,06 32,50EX 41 - L EX 41M 3/4” 1” 1/4” 12,22 16,38 21,06 26,78 36,66 59,28EX 45 - L EX 45M 7/8” 1 1/8” 1/4” 22,88 29,12 42,90EX 47 - L EX 47M 1” 1 1/4” 1/4” 17,42 26,78 33,80 41,08

* Extra specifications for ordering (online)EX3M6NS (no shoulder)EX5M6NS (no shoulder)EX6M6NS (no shoulder)EX7M6NS (no shoulder)EX8M6NS (no shoulder)

Type A-EXInch

E X 9 M 6

Prefix L

Ordering example

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthMat.: H13 Max. Temp: 500-550°CSurface roughness: Ra

Ejector Pins - Inch - Nitrided

+0.375”-0.000”

+0.000”-0.01”

+0.000”-0.004”

-0.0003”-0.0006”

OS = oversize = d1 = +0,005”

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 16 -

1/02

/200

7

- 17 -www.dme.net

1/02

/200

7

a Milacron Company

Type CXInch

C X 7 M 3

Prefix L

Ordering example

Core Pins - Inch - Hardened

REF Itemprefix

d1 d2 K L

3” 6” 10” 14”

CX 7 - L CX 7M 3/32” 1/4” 1/8” 4,42 4,94 5,72CX 8 - L CX 8M 7/64” 1/4” 1/8” 4,94 4,94 5,41CX 9 - L CX 9M 1/8” 1/4” 1/8” 3,12 3,12 3,90 4,26CX 10 - L CX 10M 9/64” 1/4” 1/8” 3,12 3,38 3,90 4,26CX 11 - L CX 11M 5/32” 9/32” 5/32” 3,12 3,38 3,90 4,32CX 12 - L CX 12M 11/64” 11/32” 3/16” 3,12 3,38 4,16 4,42CX 13 - L CX 13M 3/16” 3/8” 3/16” 3,12 3,38 4,16 4,48CX 14 - L CX 14M 13/64” 3/8” 3/16” 3,38 3,38 4,42 4,59CX 15 - L CX 15M 7/32” 16/32” 3/16” 3,38 3,38 4,42 4,59CX 17 - L CX 17M 1/4” 7/16” 3/16” 3,38 3,90 4,68 4,74CX 19 - L CX 19M 9/32” 7/16” 1/4” 3,90 4,16 4,68 5,27CX 21 - L CX 21M 5/16” 1/2” 1/4” 4,16 4,42 5,72 5,97CX 23 - L CX 23M 11/32” 9/16” 1/4” 4,68 4,47 6,50 6,40CX 25 - L CX 25M 3/8” 5/8” 1/4” 5,20 5,46 7,02 7,36CX 27 - L CX 27M 13/32” 11/16” 1/4” 5,46 6,79 7,54 7,71CX 29 - L CX 29M 7/16” 11/16” 1/4” 7,17 6,24 9,91 10,10CX 31 - L CX 31M 15/32” 3/4” 1/4” 6,50 6,76 9,10 10,30CX 33 - L CX 33M 1/2” 3/4” 1/4” 7,02 7,28 9,88 10,83CX 35 - L CX 35M 9/16” 13/16” 1/4” 8,58 11,44 11,71CX 37 - L CX 37M 5/8” 7/8” 1/4” 10,14 13,52 13,92CX 41 - L CX 41M 3/4” 1” 1/4” 13,78 18,46 19,26

Info:d1= Pin body ød2= Head øK= Head thicknessL = LengthMat.: H13 Max. Temp: 500-550°CSurface roughness: Ra

+0.375”-0.000”

+0,000”-0,010”

+0,000”-0,002”

+0,001”-0,000”

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 18 - www.dme.net

1/02

/200

7


1/02

/200

7

Type C-EXInch

E X 3 M 6 *

Prefix L1

How To Order


Info:d1= Pin body ød2= Head ød3= Shoulder øK= Head thicknessL1 = Total lengthL2 = Shoulder length + head thicknessMat.: H13Max. Temp: 500-550°CSurface roughness: Ra

REF Itemprefix

d1 L1

6” 6”OS 10” 10”0S 14

L2

1/2 1/2 1/2 1/2 1/2

EX 2-1/2 /L1 SHLDR EJ PIN EX 2 M* 1/32” 5,58 9,38EX 3-1/2 /L1 SHLDR EJ PIN EX 3 M* 3/64” 5,20 5,62 6,34 7,40EX 5-1/2 /L1 SHLDR EJ PIN EX 5 M* 1/16” 4,94 5,72 6,50 7,09EX 6-1/2 /L1 SHLDR EJ PIN EX 6 M* 5/64” 4,94 5,15 6,50 7,09EX 7-1/2 /L1 SHLDR EJ PIN EX 7 M* 3/32” 4,42 5,46 5,41 6,72EX 8-1/2 /L1 SHLDR EJ PIN EX 8 M* 7/64” 4,42 5,46 5,98 6,72

REF

d1 L1

6” 6”OS 10” 10”0S 14

Itemprefix L2

2 2 2 2 2

EX 2-2 /L1 SHLDR EJ PIN EX 2 M* 1/32* 8,76 9,68EX 3-2 /L1 SHLDR EJ PIN EX 3 M* 3/64” 5,20 5,98 6,08 7,54EX 5-2 /L1 SHLDR EJ PIN EX 5 M* 1/16” 4,98 5,72 6,24 7,28EX 6-2 /L1 SHLDR EJ PIN EX 6 M* 5/64” 4,94 5,72 6,24 7,28EX 7-2 /L1 SHLDR EJ PIN EX 7 M* 3/32” 4,42 5,20 5,72 6,76EX 8-2 /L1 SHLDR EJ PIN EX 8 M* 7/64” 4,42 5,20 5,72 6,76

* Extra specifications for ordering (online)EX3M612SH (= EX3-1/2”/shoulder/M6)EX3M6 (= EX3-2”/shoulder/M6)EX3M1012SH (= EX3-1/2”/shoulder/M10)EX3M1012SHOS (= EX3-1/2”/shoulder/M10OS)EX3M102SH (= EX3-2”/shoulder/M10)EX3M10OS (= EX3-2”/shoulder/M10OS)EX3M14 (= EX3-2”/shoulder/M14)

+0,375”-0,000”

+0,000”-0,001”

+0,000”-0,010”

OS = oversize = d1 = +0,005”

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

+0,000”-0,001”

+0,375”-0,000”

+0,000”-0,010”

- 18 -

1/02

/200

7

- 19 -www.dme.net

1/02

/200

7

a Milacron Company

Type THXInch

T H X 0 3 0 6

Prefix L

How To Order

Info:d1= Pin body ød2= Head øK= Head thicknessL = Total lengthMat.: H13Max. Temp: 500-550°CSurface roughness: Ra


REF Itemprefix

d1 d1ø tol

d2 K L

06” 06”0S 10” 10”0S 14” 14”0S 18

THX03 - L THX03* 3/64”

+0.000-0.001

1/4 1/8 5,01 6,50THX05 - L THX05* 1/16” 1/4 1/8 4,72 5,93THX06 - L THX06* 5/64” 1/4 1/8 4,72 5,52 6,16THX07 - L THX07* 3/32” 1/4 1/8 4,26 5,47 4,77 5,64THX08 - L THX08* 7/64” 1/4 1/8 4,26 4,77 5,64THX09 - L THX09 1/8”

-0.0003-0.0006

1/4 1/8 2,29 2,54 2,56 2,70 2,98 3,29THX10 - L THX10 9/64” 1/4 1/8 2,71 3,69 3,46THX11 - L THX11 5/32” 9/32 5/32 2,40 2,64 2,71 2,83 3,20 3,57THX12 - L THX12 11/64” 11/32 3/16 2,88 3,91 3,57THX13 - L THX13 3/16” 3/8 3/16 2,45 2,83 2,88 3,00 3,52 3,86THX14 - L THX14 13/64” 3/8 3/16 3,14 4,15 3,79THX15 - L THX15 7/32” 13/32 3/16 2,66 3,29 3,20 3,45 3,89 4,09THX16 - L THX16 15/64” 13/32 3/16 3,46 4,49 4,21THX17 - L THX17 1/4” 7/16 3/16 2,83 3,22 3,52 3,24 4,21 4,66 5,39THX18 - L THX18 17/64” 7/16 1/4 3,89 5,23 4,69THX19 - L THX19 9/32” 7/16 1/4 3,20 4,02 4,06 4,15 4,85 5,42THX20 - L THX20 19/64” 1/2 1/4 4,26 5,70 5,39THX21 - L THX21 5/16” 1/2 1/4 3,52 3,97 4,48 4,56 5,39 6,09 6,82THX22 - L THX22 21/64” 9/16 1/4 4,85 6,22 6,07THX23 - L THX23 11/32” 9/16 1/4 3,94 5,06 5,29 6,34 6,96THX24 - L THX24 23/64” 5/8 1/4 5,39 6,85 6,77THX25 - L THX25 3/8” 5/8 1/4 4,16 5,42 5,60 5,88 6,82 7,36 8,95THX26 - L THX26 25/64” 5/8 1/4 6,85 9,09THX27 - L THX27 13/32” 11/16 1/4 4,64 6,24 6,62 7,78 8,58THX28 - L THX28 27/64” 11/16 1/4 7,82 10,19THX29 - L THX29 7/16” 11/16 1/4 5,06 6,93 6,82 7,14 8,63 9,73THX30 - L THX30 29/64” 11/16 1/4 8,17 10,60THX31 - L THX31 15/32” 3/4 1/4 5,93 7,47 10,76THX32 - L THX32 31/64” 3/4 1/4 9,44 11,80 12,26THX33 - L THX33 1/2”

-0.0003-0.0008

3/4 1/4 6,02 8,10 8,63 10,34 11,28 13,64THX34 - L THX34 17/32” 3/4 1/4 8,11 10,48 13,24THX35 - L THX35 9/16” 13/16 1/4 7,20 9,81 14,80THX37 - L THX37 5/8” 7/8 1/4 8,32 11,46 14,45 18,71THX39 - L THX39 11/16” 15/16 1/4 10,03 13,54 19,41THX41 - L THX41 3/4” 1 1/4 11,56 15,51 19,72 25,22THX45 - L THX45 7/8” 1-1/8 1/4 15,08 21,48 27,98THX47 - L THX47 1” 1-1/4 1/4 18,18 25,27 31,93 39,00

• Higher core hardness makes the THX pins ideal for use in die cast dies or other high temperature applications• Core hardness of 50-55 HRc minimizes nicking, dishing and bending• Non-chipping surface treatment of 65-74 HRc alleviates flashing• Annealed and finished heads permit easy machining• Centerless ground and polished outer diameter• Final finish minimizes wear and prolongs pin life

+0,375”-0,000”

OS = oversize = d1 = +0,005”

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

* Add NS ( no schoulder)

- 20 - www.dme.net

1/02

/200

7

a Milacron Company

Specials Custom-made Ejector Pins

When you want pins with special shapes such as tapers or contours - special head sizes- special hardness, special material up to any length.

D-M-E has the manufacturing, heat treating and sophisticated quality control equipment to meet your requirements for special ejector pins, core pins or ejector sleeves.

Special pins match the precision manufac-turing of all our standards in every detail.

Step 1: Photocopy this form. Step 2: Specify required tolerances on all dimensions.

Step 3: Contact D-M-E

Special PinsComments:............................................................................................................................................................Company: .............................................................Contact: ................................................................Tel.: .......................................................................Fax:.......................................................................Quantity: ...............................................................Mat.:......................................................................Hardness: .................................................... HRCDelivery date: .......................................................Nitrite: YesSignature: .............................................................Order Number:......................................................

Comments:............................................................................................................................................................Company: .............................................................Contact: ................................................................Tel.: .......................................................................Fax:.......................................................................Quantity: ...............................................................Mat.:......................................................................Hardness: .................................................... HRCDelivery date: .......................................................Nitrite: YesSignature: .............................................................Order Number:......................................................

Comments:..........................................................................................................................................................................................................................................Company: .............................................................Contact: ................................................................Tel.: .......................................................................Fax:.......................................................................Quantity: ...............................................................Mat.:......................................................................Hardness: .................................................... HRCDelivery date: .......................................................Nitrite: YesSignature: .............................................................Order Number:......................................................

Dim. Tol.d1d2KRL

Dim. Tol.d1d2d3L1L2KR

4

Dim. Tol.d1d2K

R1R2ab

L1L2

- 20 -

1/02

/200

7 Eje

ctor

Sle

eves

Ejector SleevesD-M-E ejector sleeves are made of the finest grade nitriding steel. They are gun drilled, finish reamed and honed for accurate concentricity of O.D./I.D. over full bearing length. The heads are hot-forged for uniform, consistent tensile strength and longer mold life. The outside surface is nitrided to a hardness of min. 950 HV 0,3 and is honed to minimize wear and give trouble-free performance. Your D-M-E Service Center stocks a wide range of diameters and lengths to suit a variety of

applications.


www.dme.net

- 22 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Item prefix

d d1 d2 L2 R K L

60 75 80 95 100 110 125 150 175 200 225 250 275 300 325 350

S 153 - L S 153 1,5 3,0 6,0 30 0,3 3,0 53,56 54,86 56,42 59,54 61,10 57,46 68,12 74,36S 163 - L S 163 1,6 3,0 6,0 30 0,3 3,0 61,62 69,68 78,52 87,36S 173 - L S 173 1,7 3,0 6,0 30 0,3 3,0 54,86 61,10 68,12 74,36S 183 - L S 183 1,8 3,0 6,0 30 0,3 3,0 54,86 55,12 68,12 74,36S 24 - L S 24 2,0 4,0 8,0 35 0,3 3,0 49,40 55,90 62,66 69,16 74,36 81,38S 224 - L S 224 2,2 4,0 8,0 35 0,3 3,0 49,40 55,90 62,66 69,16 74,36 81,38S 255 - L S 255 2,5 5,0 10,0 35 0,3 3,0 49,40 55,90 62,66 69,16 68,38 82,42 80,60 86,32S 275 - L S 275 2,7 5,0 10,0 45 0,3 3,0 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64S 285 - L S 285 2,8 5,0 10,0 45 0,3 3,0 54,86 55,12S 35 - L S 35 3,0 5,0 10,0 45 0,3 3,0 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64S 325 - L S 325 3,2 5,0 10,0 45 0,3 3,0 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64S 356 - L S 356 3,5 6,0 12,0 45 0,5 5,0 49,40 55,90 62,66 69,16 75,92 82,42 90,48 95,68S 376 - L S 376 3,7 6,0 12,0 45 0,5 5,0 49,40 55,90 62,66 69,16 75,92 82,42 90,48 98,80S 46 - L S 46 4,0 6,0 12,0 45 0,5 5,0 49,40 55,90 62,66 69,16 75,92 82,42 90,48 95,68S 428 - L S 428 4,2 8,0 14,0 45 0,5 5,0 50,44 57,46 63,70 70,72 77,22 83,98 93,08 97,24S 458 - L S 458 4,5 8,0 14,0 45 0,5 5,0 49,40 55,90 62,66 69,16 75,92 82,42 90,48 95,68S 58 - L S 58 5,0 8,0 14,0 45 0,5 5,0 50,44 57,46 63,70 70,72 77,22 83,98 83,98 97,24S 528 - L S 528 5,2 8,0 14,0 45 0,5 5,0 56,42 57,46 63,70 70,72 77,22 83,98 82,94 99,84S 610 - L S 610 6,0 10,0 16,0 45 0,5 5,0 53,30 60,06 66,56 73,32 79,82 86,58 93,60 99,84 106,34 117,00S 6210 - L S 6210 6,2 10,0 16,0 45 0,5 5,0 53,30 60,06 66,56 73,32 79,82 86,58 84,24 99,84 106,34 192,14S 6510 - L S 6510 6,5 10,0 16,0 45 0,5 5,0 48,10 60,06 66,56 73,32 86,58 93,60 99,84 106,34 117,00S 812 - L S 812 8,0 12,0 18,0 45 0,8 7,0 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88 107,90 118,56 129,22 139,62S 8212 - L S 8212 8,2 12,0 18,0 45 0,8 7,0 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88 107,90 106,86 129,22 139,62S 8512 - L S 8512 8,5 12,0 18,0 45 0,8 7,0 48,62 61,10 68,12 74,36 87,62 85,28 100,88 107,90 118,56S 1014 - L S 1014 10,0 14,0 22,0 45 0,8 7,0 62,66 69,16 75,92 80,86 89,44 95,68 102,70 108,94 119,60 130,26 140,92S 10214 - L S 10214 10,2 14,0 22,0 45 0,8 7,0 62,66 69,16 75,92 82,42 89,44 95,68 102,70 98,28 119,60 130,26 140,92S 10514 - L S 10514 10,5 14,0 22,0 55 0,8 7,0 50,44 62,66 62,40 75,92 74,36 89,44 95,68 102,70 108,94 119,60 117,26 140,92S 1114 - L S 1114 11,0 14,0 22,0 55 0,8 7,0 55,90 62,66 69,16 75,92 82,42 89,44 95,68 102,70 108,94 107,64 130,26 140,92S 1216 - L S 1216 12,0 16,0 22,0 45 0,8 7,0 63,96 70,20 76,70 85,02 92,04 98,28 105,30 111,54 109,98 132,86 143,52S 12516 - L S 12516 12,5 16,0 22,0 55 0,8 7,0 65,52 71,76 78,78 85,02 92,04 98,28 105,30 111,54 122,20 132,86 143,52S 1418 - L S 1418 14,0 18,0 24,0 55 0,8 9,0 61,10 68,12 74,36 81,38 87,62 94,64 100,88 107,90 114,14 124,80 143,52 287,30S 1620 - L S 1620 16,0 20,0 26,0 55 0,8 9,0 63,70 63,70 77,22 83,98 91,78 97,24 103,74 110,50 117,00 130,26 146,12 159,38S 1822 - L S 1822 18,0 22,0 28,0 55 0,8 9,0 66,56 73,32 79,82 86,58 99,84 106,34 113,10 122,20 135,46 148,72 161,98

Type SDIN 16756ISO 8405

S 1 5 3 6 0

Prefix L

How To Order

Info:d= Pin body inside ød1= Pin body outside ød2= Head øK= Head thicknessL1 = Total lengthL2 = Fit lengthStandard: DIN16756/ISO8405Mat.: WAS (~1.2344)Max. Temp: 500-550°CSurface roughness: Ra

Ejector Sleeves - Nitrided

+0+2

g6 0-0,2H5 0

-0,05

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 22 -

1/02

/200

7

- 23 -www.dme.net

1/02

/200

7

a Milacron Company

Type KSDIN 16756ISO 8405

Info:d= Pin body inside ød1= Pin body outside ød2= Head øK= Head thicknessL1 = Total lengthL2 = Fit lengthStandard: DIN16756/ISO8405Mat.: WS (~1.2067)Max. Temp: 200-250°CSurface roughness: Ra

Ejector Sleeves - Hardened

REF Item prefix

d d1 d2 L2 R K L

60 75 100 125 150 175 200 225 250 275 300 325 350

KS 153 - L KS 153 1,5 3,0 6,0 30 0,3 3,0 54,86 54,86 61,10 68,12 74,36 81,38 87,62 102,70 119,86KS 163 - L KS 163 1,6 3,0 6,0 30 0,3 3,0 54,86 54,86 61,10 68,12 74,36 81,38KS 173 - L KS 173 1,7 3,0 6,0 30 0,3 3,0 54,86 61,10 68,12 74,36KS 183 - L KS 183 1,8 3,0 6,0 30 0,3 3,0 54,86 61,10 68,12 74,36KS 24 - L KS 24 2,0 4,0 8,0 35 0,3 3,0 49,40 49,40 55,90 62,66 69,16 75,92 82,42 89,44 95,68 102,70 108,94 129,22KS 224 - L KS 224 2,2 4,0 8,0 35 0,3 3,0 49,40 49,40 55,90 62,66 69,16 75,92 82,42 89,44 95,68KS 255 - L KS 255 2,5 5,0 10,0 35 0,3 3,0 47,84 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88KS 275 - L KS 275 2,7 5,0 10,0 45 0,3 3,0 47,84 43,16 54,86 61,10 68,12 74.36 81,38 87,62 94,64 100,88KS 35 - L KS 35 3,0 5,0 10,0 45 0,3 3,0 48,10 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88KS 325 - L KS 325 3,2 5,0 10,0 45 0,3 3,0 48,10 47,84 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88KS 356 - L KS 356 3,5 6,0 12,0 45 0,5 5,0 49,40 49,40 55,90 62,66 69,16 75,92 82,42 90,48 95,68 102,70 113,10KS 376 - L KS 376 3,7 6,0 12,0 45 0,5 5,0 44,46 49,40 55,90 62,66 62,40 75,92 82,42 90,48 95,68 102,70 113,10KS 46 - L KS 46 4,0 6,0 12,0 45 0,5 5,0 49,40 49,40 55,90 62,66 69,16 75,92 82,42 90,48 95,68 102,70 113,10 124,28 134,42KS 428 - L KS 428 4,2 8,0 14,0 45 0,5 5,0 50,44 50,44 57,46 63,70 70,72 77,22 83,98 93,08 97,24 103,74 114,14 124,80KS 458 - L KS 458 4,5 8,0 14,0 45 0,5 5,0 50,44 57,46 63,70 70,72 83,98 93,08 97,24KS 58 - L KS 58 5,0 8,0 14,0 45 0,5 5,0 50,44 50,44 57,46 63,70 70,72 77.22 83,98 93,08 97,24 103,74 114,14 124,80 135,46KS 528 - L KS 528 5,2 8,0 14,0 45 0,5 5,0 50,44 50,44 57,46 63,70 70,72 77,22 83,98 93,08 97,24 103,74 114,14 124,80KS 558 - L KS 558 5,5 8,0 14,0 45 0,5 5,0 45,50 50,44 57,46 63,70 70,72 77,22 83,98 93,08 97,24 103,74 114,14 124,80KS 610 - L KS 610 6,0 10,0 16,0 45 0,5 5,0 53,30 53,30 60,06 66,56 73,32 79,82 86,58 93,60 99,84 106,34 117,00 127,40 138,06KS 6210 - L KS 6210 6,2 10,0 16,0 45 0,5 5,0 48,10 53,30 60,06 66,56 73,32 79,82 86,58 93,60 99,84 106,34 117,00 127,40 138,06KS 6510 - L KS 6510 6,5 10,0 16,0 45 0,8 5,0 48,10 53,30 60,06 66,56 73,32 79,82 86,58 93,60 99,84 106,34 117,00 127,40 138,06KS 812 - L KS 812 8,0 12,0 18,0 45 0,8 7,0 54,86 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88 107,90 122,68 134,19 139,62KS 8212 - L KS 8212 8,2 12,0 18,0 45 0,8 7,0 54,86 54,86 61,10 61,36 67,08 81,38 87,62 94,64 100,88 107,90 118,56 129,22 139,62KS 8512 - L KS 8512 8,5 12,0 18,0 45 0,8 7,0 54,86 54,86 61,10 68,12 74,36 81,38 87,62 94,64 100,88 107,90 118,56 129,22 139,62KS 1014 - L KS 1014 10,0 14,0 22,0 45 0,8 7,0 55,90 62,66 69,16 75,92 74,36 89,44 95,68 102,70 108,94 119,60 130,26 140,92KS 10514 - L KS 10514 10,5 14,0 22,0 55 0,8 7,0 55,90 62,66 69,16 75,92 82,42 89,44 95,68 102,70 108,94 123,78 130,26 140,92KS 1114 - L KS 1114 11,0 14,0 22,0 55 0,8 7,0 55,90 62,66 69,16 75,92 82,42 89,44 95,68 102,70 108,94 119,60 130,26 140,92KS 1216 - L KS 1216 12,0 16,0 22,0 45 0,8 7,0 52,78 65,52 71,76 78,78 85,02 92,04 98,28 105,30 111,54 122,20 132,86 143,52KS 12516 - L KS 12516 12,5 16,0 22,0 55 0,8 7,0 52,78 65,52 71,76 78,78 76,70 92,04 98,28 105,30 111,54 122,20 132,86 143,52KS 1418 - L KS 1418 14,0 18,0 24,0 55 0,8 9,0 66,56 68,12 74,36 81,38 94,64 100,88 107,90 114,14 124,80 143,52 154,18KS 1620 - L KS 1620 16,0 20,0 26,0 55 0,8 9,0 69,94 70,72 77,22 83,98 97,24 103,74 110,50 117,00 130,26 146,12 159,38KS 1822 - L KS 1822 18.0 22.0 28.0 55 0.8 9.0 76,18 73,32 79,82 86,58 99,84 106,34 113,10 122,20 135,46 148,72 161,98

+0+2

g6 0-0,2H5 0

-0,05

K S 1 5 3 6 0

Prefix L

How To Order

4


Prices in €/piece

Items in stock




Prices in €/piece

Items in stock


Availability

- 24 - www.dme.net

1/02

/200

7


1/02

/200

7

REF Item prefix

d d1 d2 K L

3” 4” 5” 6” 7” 8” 9” 10” 11” 12”

S 13 - L S 13M 3/32” 3/16” 3/8” 3/16” 29,90 36,40 35,62 38,74 46,54S 15 - L S 15M 1/8” 7/32” 12/32” 3/16” 31,72 31,98 39,00 42,38 45,76S 17 - L S 17M 5/32” 1/4” 7/16” 3/16” 27,04 28,34 30,42 29,90 36,66 40,04 45,24S 21 - L S 21M 3/16” 5/16” 1/2” 1/4” 27,82 26,52 28,60 31,72 38,22 38,22 42,38 52,26 52,78S 23 - L S 23M 7/32” 11/32” 9/16” 1/4” 28,08 29,90 32,24 32,50 39,52 44,72 49,40S 25 - L S 25M 1/4” 3/8” 5/8” 1/4” 28,60 30,42 33,02 36,66 40,04 45,24 50,44 50,18 62,14S 29 - L S 29M 5/16” 7/16” 11/16” 1/4” 29,38 32,24 35,62 39,00 43,42 48,10 53,30 59,80 66,04S 33 - L S 33M 3/8” 1/2” 3/4” 1/4” 27,04 35,36 38,22 42,38 46,54 46,80 57,46 57,20 70,20S 37 - L S 37M 7/16” 5/8” 7/8” 1/4” 31,98 38,22 44,72 43,42 53,30 58,50 57,98 70,72 70,20S 39 - L S 39M 1/2” 11/16” 15/16” 1/4” 33,28 39,52 42,12 50,96 50,18 61,36 61,10 67,60 81,64S 41 - L S 41M 9/16” 3/4” 1” 1/4” 41,86 45,76 50,44 49,66 60,32 66,56 72,54 79,30 85,80S 45 - L S 45M 5/8” 7/8” 1 1/8” 1/4” 47,06 46,80 51,48 55,38 60,84 73,58 80,08 78,78 94,38S 47 - L S 47M 3/4” 1” 1 1/4” 1/4” 52,26 51,74 62,14 67,86 66,30 80,60 87,36 85,02 102,44

Type SInch

Info:d= Pin body inside ød1= Pin body outside ød2= Head øK= Head thicknessL = Total lengthMat.: H13Max. Temp: 500-550°CSurface roughness: Ra

Ejector Sleeves - Inch - Nitrided

+0.375”-0.000”

+0,0005”-0,0000”

+0,000”-0,010”

+0,0005”-0,0000”

+0,000”-0,002”

S 1 3 M 3

Prefix L

How To Order

4


Prices in €/piece

Items in stock


Availability

- 24 -

1/02

/200

7

- 25 -www.dme.net

1/02

/200

7

a Milacron Company

SpecialsCustom-made Sleeves

When you want pins with special shapes such as tapers or contours - special head sizes- special hardness, special material up to any length.

D-M-E has the manufacturing, heat treating and sophisticated quality control equipment to meet your requirements for special ejector pins, core pins or ejector sleeves.

Special pins match the precision manufac-turing of all our standards in every detail.



Special Sleeves

Comments:

..............................................................................

..............................................................................

..............................................................................

Company: .............................................................

Contact: ................................................................

Tel.: .......................................................................

Fax:.......................................................................

Quantity: ...............................................................

Mat.:......................................................................

Hardness: .................................................... HRC

Delivery date: .......................................................

Nitrite: Yes

Signature: .............................................................

Order Number:......................................................

Dim. Tol.d1d2d3L1L2KR

4

www.dme.net

1/02

/200

7

a Milacron Company- 26 -

Notes

1/02

/200

7 Fle

xibl

e C

ores

Flexible CoresManufactured from spring steel this unit allows the release of small undercuts. It is activated by the ejector plates as a standard ejector. They come with a reference plane and a conical fixing system, which saves

cutting the flexible core to fix it.


www.dme.net

- 28 - www.dme.net

1/02

/200

7


1/02

/200

7

AW 275

Info:L = Total lengthG = Shoulder lengthStandard: DIN16756/ISO8405Mat.: 1.8159 - 45 ±3 HRCSurface roughness: Ra

Flexible Cores With Mounting Thread

To match contour

A W 2 7 5 0 6 6 2

Prefix A B

How To Order

Frequently Asked Questions (FAQ)

1 How many shots do the Flexible Cores stand? As any mobile element, their lifetime depends essentially on their adjustment, as well as the tolerances used (which might be

H7/g6). Flexible cores not being properly installed, may last a short period, but if they are installed as they should, they might produce more than 2 million pieces. Please, read our instructions for installation.

2 How is a Flexible Core correctly installed? Please, carefully read the instructions for installation. Furthermore, we want to stress that it is very important to correctly cal-

culate the Flexible Cores length. If this is machined shorter than its emplacement, once the Flexible Core gets attached to the ejector plates, the central part gets elongated, bringing weakness.

3 What would happen if the ejection stroke is more than C-dimension? When the Flexible Core head goes free out of its emplacement, due to the rounded shaft and screw attachment, this is prone

to twist. This torsionnal movement affects to the thinnest zone which could, after several shots, break. A solution is to use our Keyed Flexible Cores, which have a flat on the shaft that prevents the rotation to occur. You could also make a flat on the rear zone of the Flexible Core shaft yourself, placing a cotter pin to hold it.

REF A - B Item prefix C D E G H K L R €AW275 06 - 6,2 AW275 22 9 3,5 40 25 3,5 125 M4 115,96AW275 06 - 8,2 AW275 22 9 3,5 40 25 3,5 125 M4 115,96AW275 08 - 8,2 AW275 25 11,5 4,5 50 30 4,5 140 M5 127,66AW275 08 - 10,2 AW275 25 11,5 4,5 50 30 4,5 140 M5 127,66AW275 08 - 12,2 AW275 25 11,5 4,5 50 30 4,5 140 M5 127,66AW275 10 - 14,2 AW275 30 15 5,5 60 38 5,5 175 M6 164,84AW275 10 - 16,2 AW275 30 15 5,5 60 38 5,5 175 M6 164,84AW275 10 - 18,2 AW275 30 15 5,5 60 38 5,5 175 M6 164,84

4


Prices in €/piece

Items in stock


Availability

- 28 -

1/02

/200

7

- 29 -www.dme.net

1/02

/200

7

a Milacron Company

AW 275Flexible Cores With Mounting Thread

Simple Ejection

1 This area of support must be the same length as dimension H on the Sprung Core.

2 The adjustment area must be at least 1/3 of the dimension C.

3 The stroke of the sprung Core must be the same or smaller than the dimension C.

4 The plate that houses the shaft of the core must be minimum 15 mm in all cases.

5 The draft angle must be minimum 2 degrees.

6 The core length must be 0,02-0,05 larger than its own hole.

7 After the core is adjusted, remove 0,1 to ensure smooth ejection. General tolerance of adjustment H7/g6

Ejection With Double Plate

4

- 30 - www.dme.net

1/02

/200

7


1/02

/200

7

AW 280

Info:L = Total lengthG = Shoulder lengthStandard: DIN16756/ISO8405Mat.: 1.8159 - 45 ±3 HRCSurface roughness: Ra

Flexible Cores With Mounting Thread

To match contour

A W 2 8 0 0 6 6 2

Prefix d b

How To Order

REF d - b* Item prefix d1 h1 h2 incl. incl. €

AW280 06 - 6,2 AW280 M4 10,0 3,5 AW 282 06 AW 281 06 168,74AW280 06 - 8,2 AW280 M4 10,0 3,5 AW 282 06 AW 281 06 173,94AW280 08 - 10,2 AW280 M5 11,2 1,5 AW 282 08 AW 281 08 173,94AW280 08 - 12,2 AW280 M5 11,2 1,5 AW 282 08 AW 281 08 181,48AW280 10 - 15,2 AW280 M6 13,6 5,5 AW 282 10 AW 281 10 181,48AW280 10 - 18,2 AW280 M6 13,6 5,5 AW 282 10 AW 281 10 181,48

AW 280AW 281Clamping Guides

AW 282Guide Bushes

AW 283Extensions

REF d Item prefix b1 l3 €AW281 06 AW281 6 13,5 29,38AW281 08 AW281 8 14,5 29,38AW281 10 AW281 10 15,5 29,38

REF d Item prefix d2 €AW282 06 AW282 12 1,56AW282 08 AW282 12 1,56AW282 10 AW282 16 1,56

REF d Item prefix d1 sw d3 l4 €

AW283 06 AW283 M4 3 08 13,5 41,34AW283 08 AW283 M5 4 10 14,5 46,34AW283 10 AW283 M6 5 12 15,5 51,74

Info:Mat.: 1.8159 - 45 ±3 HRC

Info:Mat.: Bronze

Info:Mat.: 1.7225 - 50 ±3 HRC

4


Prices in €/piece

Items in stock


Availability

To match contour

- 30 -

1/02

/200

7

- 31 -www.dme.net

1/02

/200

7

a Milacron Company

AW 280Flexible Cores With Mounting Thread

Installation Instructions

Χ= +1 *

B15

b1H7

12 H7 DIN 974 T.1

≥15

M6l 3

+0,1

A

B

4 . x4,5

D

C

≥15A

Ø12

,5

≤30

d3H7

l 4+0

,1

12 H7

Ø12

,5Ø

12,5

M6

DIN 974 T.1

≥0,0X

Aw 281 Aw 283 Aw 282 Aw 280

C

DX

min. H1 + 2 mm

Fw

1800

Fw

1800

Fw

1800

H1

38**

x

Χ

≥

For large buckling lengths, please use guide bushes AW 282

* = Depending on surface roughness** = To match the contour

4

- 32 - www.dme.net

1/02

/200

7

a Milacron Company

AW 285 Custom-made Flexible Ejectors

Special applications require perhaps deviations from the listed standard components AW 275 and AW 280. Please fill your desired dimensions into the chart below. In order to maintain quality features (Service life tec.) the dependency of particular parameters in relation to eachother have to be observed. Agreement between customer and supplier in regard to dimensions or requirements (by example spring travel in relation to spring length) form the basis of well-performing parts.Mat.: 1.8159 - 45 ±3 HRC



Special Ejectors

Comments:

..........................................................................................................................................................................................................

..........................................................................................................................................................................................................

..........................................................................................................................................................................................................

Company: .........................................................................................................................................................................................

Contact: ............................................................................................................................................................................................

Tel.: ...................................................................................................................................................................................................

Fax:...................................................................................................................................................................................................

Quantity: ...........................................................................................................................................................................................

Mat.:..................................................................................................................................................................................................

Hardness: .................................................... HRC

Delivery date: ...................................................................................................................................................................................

Nitrite: Yes

Signature: .........................................................................................................................................................................................

Order Number:..................................................................................................................................................................................

Item prefix a b b1 h h1 h2 H I α Quantity Deliverymin. 3 a/2+0,5 3°max. 10 60 60 120 40 350 6°

AW 285

h*

l ±2

A

b±0,

1 *α

H±0

,2

h 1±0

,1

h 2±0

,1

a±0,

1b 1

±0,1

58 ± 2 HRC

b1±0,1

** =

To match length

To match contour

4

- 32 -

1/02

/200

7 a Milacron Company a Milacron Company

www.dme.net Tech

nica

l Dat

a

- 34 - www.dme.net

1/02

/200

7


1/02

/200

7

PVD Coating ServiceYour coating plan for greater economy

D-M-E standard coatings

LAM-A = chromium nitride (CrN)LAM-B = titanium nitride (TiN)LAM-C = titanium carbon nitride (TiCN)LAM-D = titanium aluminium nitride (TiAlN)LAMCOAT® = modified WS2 coatingFurther coatings on request

Correctly coated - for long-term useExcessive wear on tools for sheet metal and plastics processing results in shorter service lives.This in turn means high maintenance costs and problems caused by frequent production downtime.By using a coating that is adapted to the specific problem the wear caused by corrosion, abrasion and adhesion can be signifi-cantly reduced.Benefits: clearly measurable extension in service life, reduction in lubricants, improved flow properties for plastics and thus an increase in cost-effectiveness.

The PVD Coating Service business unit at D-M-E Normalien GmbH has many years’ experience and the optimum technology for coating tool steels, HSS, carbides and other electrically conductive materials at temperatures of between 200 and 550 degrees Celsius. We can find the right coating for your needs, depending on the material to be processed, the processing method, the product geometry and the target outcome.

The treatment prior to coating is also an extremely important element in the successful use of a tool. Not only does our company have a range of methods to choose from, we also have experts with many years’ experience to ensure you receive the optimum surface quality. Depending on the requirement, rough polishing, fine-finishing and technical polished finishes are carried out in our own workshop, in order to achieve the optimum result in combination with the coating.

Your benefit: coatings which work economicallyLAM-A coatingThe CrN coating features excellent bonding strength and outstanding chemical resistance. Its high elasticity means that it can also be used on thin-walled workpieces, even those that are partially elastic.

Plastics processing: for curved and functional surfaces where wear and corrosion problems occur as a result of chemically aggres-sive and abrasive fillers. Numerous benefits in terms of cost-effectiveness and durability of tools:• High wear resistance, particularly with glass-fibre- or mineral-reinforced plastics• Reduction in mould-release forces, fewer or no parting agents required• Increased corrosion resistance to acids and enclosed hot gases• Reduced wear in the feed orifice area• Lower edge wear• Improved cavity-filling process• Shorter cooling time• Reduced cleaning and repair costs• Increased productivity

LAM-B coatingGolden yellow colour, suitable for cutting and forming tools and some applications with plastics moulding tools, particularly in the processing of soft plastics, silicon and rubber.

LAM-C coatingA PVD carbide coating in which two reactive gases (nitrogen and a carbonaceous gas) are made to react with titanium. The car-bonaceous gas makes the TiCN coating harder with a lower coefficient of friction at the same time. Mainly suitable for processing extremely ductile and hard materials for machining and stamping, for highly-stressed forming tools, clipping punches, die plates, bending tools and extrusion punches.

LAM-D coatingThe particular features of TiAlN coatings are their good oxidation resistance and excellent hardness. The main areas of application are in machining, particularly for hard, ductile materials. The best results are achieved with HSC tools and dry processing. TiAlN is also suitable for special requirements in the fields of forming and stamping.

TechnicalData Coatings4

- 34 -

1/02

/200

7

- 35 -www.dme.net

1/02

/200

7

a Milacron Company

Technical DataCoatings 4

The soft coating with proven hardnessLAMCOAT® coatingDeveloped in the US for the space industry and successfully used since then in many mechanical, electrical and hydraulic en-gineering fields, LAMCOAT® is a soft coating based on tungsten disulphide. Applied at room temperature, the coating thickness is between 0.0005 and 0.0015 mm and reduces friction by up to 70%, depending on the application. In many cases this surface coating with its outstanding lubricating and anti-friction properties is the ideal complement to our PVD carbide coatings.

Areas of application …… with mechano-dynamic components:Forming technology: drawing, stamping and forming tools for processing NF metal and chromium-nickel steels.

• International motor sports: effective improvement in performance by 10% by coating transmissions

• Bearings for large-scale presses: reduction in internal temperature by approx. 20% by cutting friction• Ball-bearings for high-vacuum and ultra-high-vacuum applications and special ball-bearings: enhanced operation• Pump elements: increased cost-effectiveness by reducing friction

… with injection moulds: • Faster filling of cavities• Lower mould-release forces with most plastics• Reduction in tool temperature• Reduction in cycle time• Lower consumption of releasing agents• Increase in production reliability• No change in component geometry during mould release• Less wastage

… with forming tools:• Reduction in lubricant consumption• Extended service lives

- 36 - www.dme.net

1/02

/200

7


1/02

/200

7

Brinell HardnessBrinell hardness can be defined as the amount of force applied by a hard object, such as a steel ball, divided by the area of the indentation that the ball makes in the material. The output is read as a pressure (N/mm2, Kgf/m2, PSI).

Rockwell HardnessThe Rockwell hardness test is based on the differential in the depth of indentation produced on a sample’s surface by a primary (“minor”) and secondary (“major”) load and a specific sized indentor or “penetrator.” The difference in penetration depth between the two loads provides the measure of the hardness. The output would be read as a distance (mm, inch). There are several Rock-well scales for different ranges of hardness. The B scale (HRB) is used for soft metals and utilizes a steel ball as the penetrator, while the C scale (HRC) is used for hard metals and utilizes a cone-shaped diamond as the penetrator. Rockwell hardness num-bers are not proportional to Brinell hardness readings.

Vickers HardnessThe Vickers hardness test method differs from the Rockwell (HRC) test method by using a square-based diamond pyramid pen-etrator, and the hardness number is equal to the load divided by the product of the lengths of the diagonals of the square impres-sion. Vickers hardness is the most accurate test method for very hard materials and can be used on thin sheets of material. The output would not be a pressure value since the load is not divided by the area of the indentation.

Tensile StrengthTensile strength can be defined as the quantity of stress required to overcome a material’s resistance to structural failure. Tensile strength is read as a stress or pressure value (N/mm2, Kgf/m2, PSI).

Kilogram-force The deprecated unit kilogram-force (kgf, often just kg) or kilopond (kp) is defined as the force exerted by one kilogram of mass in standard Earth gravity. Although the gravitational pull of the Earth varies as a function of position on earth, it is here defined as exactly 9.80665 m/s². So one kilogram-force is by definition equal to 9.80665 newtons.[1] The kilogram-force has never been a part of the International System of Units (SI), which was introduced in 1960. The SI unit of force is the newton.

TechnicalData Definitions4

- 36 -

1/02

/200

7

- 37 -www.dme.net

1/02

/200

7

a Milacron Company

Technical DataHardness Chart - Cross-Reference (equivalences)

Brinell Hardness TensileStrength

VickersHardness Rockwell Hardness Shore Hardness

SHBHN10 mm steel ball.

3000 kg load

N/mm2 (MPa) HVDiamond pyramid

30 kg load

HRCDiamond cone.

150 kg load

HRB1/16 inch steel ball.

100 kg load96 343 96 – 55 –

103 363 103 – 61 –111 402 111 – 66 –121 432 121 – 70 –131 471 131 – 74 –143 510 143 – 78 –149 530 149 – 80 –156 540 156 – 82 –163 559 163 – 85 –170 579 170 – 88 –179 598 179 – 89 –183 608 183 – 90 30187 628 187 – 91 31192 638 192 – 92 –197 657 197 – 93 32201 667 201 – 94 33207 687 207 16 95 34212 697 212 17 96 34217 716 217 18 97 35223 736 223 19 98 36229 765 229 20 99 37235 775 235 22 100 38241 795 245 23 100 39248 814 256 24 101 40255 834 266 25 102 41262 853 276 26 103 42269 883 285 27 104 43277 903 292 28 105 44285 932 302 29 107 45293 952 310 30 108 46302 981 319 32 109 47311 1020 327 33 109 48321 1050 338 34 110 49331 1079 346 36 110 50341 1118 359 37 111 52352 1158 370 38 112 53363 1197 382 39 112 54375 1236 394 40 113 55388 1285 407 41 114 57401 1334 421 42 114 58415 1383 437 44 115 60430 1442 453 45 – 62444 1491 471 46 – 63461 1570 491 48 – 66478 1628 510 49 – 67495 1717 534 51 – 70514 1815 566 52 – 73533 586 53 – 75546 – 608 54 – 76559 – 625 55 – 78571 – 645 56 – 80583 – 664 57 – 81594 – 682 58 – 83606 – 706 59 – 84616 – 726 60 – 86627 – 749 61 – 87636 – 770 62 – 89649 – 800 63 – 91660 – 830 64 – 92670 – 862 65 – 94680 – 898 66 – 95689 – 934 67 – 97700 – 980 68 – 98

All values shown in this chart are approximate and intended only as a reference guide.

4

- 38 - www.dme.net

1/02

/200

7


1/02

/200

7

TechnicalData Appendix

Corrections to be added to Rockwell “C” readings obtained on cylindricals surfaces

Reading obtained (What we can read in the machine when measuring the hardness) Actual HRC valueø 2 mm ø 3 mm ø 4 mm ø 5 mm ø 6 mm ø 7 mm ø 8 mm ø 9 mm ø 10 mm

15,0 18,5 22,0 24,0 25,0 26,0 26,5 27,0 27,5 3016,5 20,0 23,0 25,0 26,0 27,0 27,5 28,0 28,5 3118,0 21,0 24,0 26,0 27,5 28,0 29,0 29,5 29,5 3219,0 22,5 25,5 27,5 28,5 29,0 30,0 30,5 30,5 3320,5 23,5 26,5 28,5 29,5 30,5 31,0 31,5 32,5 3421,5 25,0 27,5 29,5 30,5 31,5 32,0 32,5 33,0 3523,0 26,0 29,0 30,5 31,5 32,5 33,0 33,5 34,0 3624,5 27,5 30,0 31,5 33,0 33,5 34,0 34,5 35,0 3725,5 28,5 31,0 33,0 34,0 34,5 35,0 35,5 36,0 3827,0 30,0 32,5 34,0 35,0 35,5 36,5 36,5 37,0 3928,5 31,0 33,5 35,0 36,0 37,0 37,5 37,5 38,0 4029,5 32,5 34,5 36,0 37,0 38,0 38,5 39,0 39,0 4131,0 33,5 36,0 37,5 38,0 39,0 39,5 40,0 40,0 4232,0 35,0 37,0 38,5 39,5 40,0 40,5 41,0 41,5 4333,5 36,0 38,0 39,5 40,5 41,0 41,5 42,0 42,5 4435,0 37,5 39,5 40,5 41,5 42,0 42,5 43,0 43,5 4536,0 38,5 40,5 42,0 42,5 43,5 43,5 44,0 44,5 4637,5 40,0 41,5 43,0 43,5 44,5 45,0 45,0 45,5 4739,0 41,0 43,0 44,0 45,0 45,5 46,0 46,0 46,5 4840,0 42,0 44,0 45,0 46,0 46,5 47,0 47,5 47,5 4941,5 43,5 45,0 46,5 47,0 47,5 48,0 48,5 48,5 5043,0 44,5 46,5 47,5 48,0 48,5 49,0 49,5 49,5 5144,0 46,0 47,5 48,5 49,0 49,5 50,0 50,5 51,0 5245,5 47,0 48,5 49,5 50,5 51,0 51,0 51,5 52,0 5346,5 48,5 50,0 51,0 51,5 52,0 52,5 52,5 53,0 5448,0 49,5 51,0 52,0 52,5 53,0 53,5 53,5 54,0 5549,5 51,0 52,0 53,0 53,5 54,0 54,5 54,5 55,0 5650,5 52,0 53,5 54,0 54,5 55,0 55,5 56,0 56,0 5752,0 53,5 54,5 55,5 56,0 56,0 56,5 57,0 57,0 5853,5 54,3 55,5 56,5 57,0 57,5 57,5 58,0 58,0 5954,5 56,0 57,0 57,5 58,0 58,5 58,5 59,0 59,0 6056,0 57,0 58,0 58,5 59,0 59,5 60,0 60,0 60,5 6157,5 58,5 59,0 59,5 60,0 60,5 61,0 61,0 61,5 6258,5 59,5 60,5 61,0 61,5 61,5 62,0 62,0 62,5 6360,0 61,0 61,5 62,0 62,5 62,5 63,0 63,0 63,5 6461,0 62,0 62,5 63,0 63,5 64,0 64,0 64,5 64,5 6562,5 63,5 64,0 64,0 64,5 65,0 65,0 65,5 65,5 6664,0 64,5 65,0 65,5 65,5 66,0 66,0 66,5 66,5 6765,0 66,0 66,0 66,5 66,5 67,0 67,5 67,5 67,2 68

Cross-Reference Steel Standards

Mat. group W.NR. EN AFNOR AISI

WS1.2067 100 Cr 6 100 C6 ~L31.2510 100 MnCrW 4 90MCWV 5 O11.2210 115 CrV 3 115 CV 3 L2

WAS1.2343 X 38 CrMoV 5 Z 38 CDV 5 H111.2344 X 40 CrMoV 5 1 Z 40 CDV 5 H13

Steel Standards currently used by D-M-E are marked in bold

4

- 38 -

1/02

/200

7

- 39 -www.dme.net

1/02

/200

7

a Milacron Company

Inches Nominal mm3/64 0.046 1,1901/16 0.062 1,5875/64 0.078 1,9843/32 0.093 2,3817/64 0.109 2,778

1/8 0.125 3,1759/64 0.140 3,5715/32 0.156 3,968

11/64 0.171 4,3653/16 0.187 4,762

13/64 0.203 5,1597/32 0.218 5,556

15/64 0.234 5,9531/4 0.250 6,350

17/64 0.265 6,7469/32 0.281 7,143

19/64 0.296 7,5405/16 0.312 7,937

21/64 0.328 8,33411/32 0.343 8,73123/64 0.359 9,128

3/8 0.375 9,52525/64 0.390 9,92113/32 0.406 10,31827/64 0.420 10,715

7/16 0.437 11,11229/64 0.450 11,50915/32 0.468 11,90631/64 0.480 12,303

1/2 0.500 12,70017/32 0.530 13,493

9/16 0.562 14,2875/8 0.625 15,875

11/16 0.687 17,4623/4 0.750 19,0507/8 0.875 22,225

1 1 25,400

Technical DataAppendix

Conversion Table D-M-E Standard Ejector Pins (inches to mm)

4

- 40 - www.dme.net

1/02

/200

7

a Milacron Company

Notes

- 40 -

1/02

/200

7

Tel. : +32 15 21 50 21Fax : +32 15 21 82 [email protected]

Tel. : +32 15 21 50 17Fax : +32 15 40 51 [email protected]

Tel. : +49 (0)2351 437 0 0180 500 4846Fax : +49 (0)2351 437 220 0180 500 [email protected]

Tel.: (0)800 142 451Fax: (0)800 142 [email protected]

Tel.: +420 571 616 320Fax: +420 571 611 [email protected]

Tel.: +44 2071 3300 37Fax: +44 2071 3300 [email protected]

Tel.: +33 1 49 93 92 23Fax: +33 1 49 93 92 [email protected]

Tel.: +34 93 338 7794 or 7952Fax: +34 93 261 [email protected]

Tel. : +31 (0)2065 45 571Fax : +31 (0)2065 45 [email protected]

Exp

ort

DE

CZ

SK

UK

FR

ES

NL

BE

Contact us for more infoon our entire range of moldmaking products

Section 1 Section 4 Section 7



Today’s molders and moldmakers are pressed to achieve more with fewer resources. That’s why the global plastics industry sees D-M-E as an essential resource. We complement the most complete set of market-leading products with unsurpassed knowledge and resources. Customers count on us for exceptional support and technical service, fast turnarounds, and the confidence that comes from D-M-E quality. So no matter why you turn to D-M-E, rest assured we’ll be there to support you every step of the way. TA

0701

1/0

2/20

07

dme ejectors

Documents