dmm selection guide - viatoris.501.com1.ru · analog multitester selection guide au-31 cx-506...

DMM Selection GuidePC LINK SYSTEM

StandardLow-cost Pocket

4-4/5digits

Datalogging High Accuracy

ACadapter

Function PC5000 PC520M PC510 PC500 PC20 RD701 RD700 CD751 CD731 CD721 CD800a PM10 PM3 PM-7 PS-8

Display 50000,500000 5000 5000 5000 4000 4000 4000 3200 3200 3200 4000 3200 4000 2000 2000

AC sensor RMS RMS RMS AVE AVE RMS AVE RMS AVE AVE AVE AVE AVE AVE AVEBest Accuracy (%) 0.03 0.08 0.08 0.08 0.5 0.3 0.3 0.5 0.5 0.5 0.7 0.8 0.7 0.7 0.7ACV 1000V 1000V 1000V 1000V 750V 1000V 1000V 750V 750V 750V 600V 500V 500V 500V 500VDCV 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 600VACA 10A 10A 10A 10A 10A 10A 10A 20A 20A 12A 400mADCA 10A 10A 10A 10A 10A 10A 10A 20A 20A 12A 400mAResistance 50MΩ 50MΩ 50MΩ 50MΩ 40MΩ 40MΩ 40MΩ 30MΩ 30MΩ 30MΩ 40MΩ 30MΩ 40MΩ 20MΩ 20MΩFrequency 200kHz 125kHz 125kHz 125kHz 1MHz 1MHz 100kHz 70.00kHzLogic Frequency 2MHzCapacitance 9999uF 9999uF 9999uF 9999uF 100uF 3000uF 3000uF 100uF 200uFOptical Isolated RS232 Interface @ @ @ @ @ Bargraph @ @ @ @ @ @ @ @ Data Logging @ AC + DC True RMS @ @ AC True RMS @ @ @ @ Temperature @ @ @ @ @ @ @ @ @ @ dBm @ %4-20mDCA @ Max, Min, Max-Min Recording @ @ Max, Min Capture(Peak hold) @ @ Relative @ @ @ @ @ @ Test Lead Resistance Calibration @ @ @ Zoom Bargraph @ Duty @ @ @ Cont. Buzzer @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Auto Range @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Range Hold @ @ @ @ @ @ @ @ @ @ @ Data Hold @ @ @ @ @ @ @ @ @ @ @ @ Diode Test @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Solar Battery @ AC Adapter @ Auto Power Off @ @ @ @ @ @ @ @ @ @ Auto Power Save @ Tilt Stand @ @ @ @ @ @ @ @ @ Integrated Case @ @ @ @ Holster @ @ @ @ @ @ @ @ @ @ CE Marking @ @ @ @ @ @ @ @ @ @ @ @ @ See Catalog Page 6 6 7 7 7 8 8 8 9 9 9 10 10 10 10

: With sensor probe "T-300PC", temperature can be measued at Ω function. To change the Ω value to °C value, conversion tableor PCLink software is necessary.

3

Analog Multitester Selection GuideAU-31 CX-506 AX-313TR YX-361TR SP21 YX360TRF CP-7D AP31

DCV }1000V }1200V }1200V 1000V 600V 1000V 500V 500VACV 1000V 1200V 1200V 1000V 600V 750V 500V 500VDCA }3A }0.3A 12A 0.25A 0.3A 0.25A 500mA 250mAACA 3AResistance 200MΩ 50MΩ 20MΩ 20MΩ 2MΩ 200MΩ 1MΩ 500kΩdB -9 +̀62dB -10 +̀63dB -10 +̀63dB -10 +̀62dB -10 +̀62dB -20 +̀36dB 4 +̀56dB

CapacitanceC1: 50p 0̀.1uFC2: 0.01u 1̀00uF

1u 1̀F 500uF 10uF

hFE 1000 1000 1000 with hFE probe 1000 with hFE probe Output Terminal @ @ @

Battery Check @ @ @ @ @

Continuity Check LED LED LED BuzzerDrop Shock Proof @ @

Zero Center Meter @ @ @ @

Polarity Switch @ @

Auto Polarity @

Auto Range @

See Catalog Page 11 11 11 11 12 12 12 12

Clamp Meter Selection GuideDCM2000R DCM2000AD DCM2000 DCM600 DLC-400A DCM400AD DCM400 DCM60L DCM60 CAM610R CAM600S

AC sensor Ture RMS Average Average Average Average / Leak Average Average Average Average Ture RMS AverageDisplay 3999 3999 1999 1999 1999 4000 4000 1999 1999 Analog AnalogACA 2000A 2000A 2000A 600A 400A 400A 400A 600A 600A 600A 600ADCA 2000A 2000A 400AACV 600V 600V 600V 600V 600V 600V 600V 600V 600V 600VDCV 600V 600V 600V 600V 600V 600V 600V 60VResistance 40MΩ 40MΩ 20MΩ 20MΩ 20MΩ 400Ω 400Ω 200Ω 100kΩ 100kΩFrequency 1000kHz 1000kHz 10kHz, 1MHz Clamp Diameter 53mm 53mm 53mm 38mm 38mm 25mm 25mm 21mm 21mm 36mm 36mmConductor Size 20 ~60mm 20 ~60mm 20 ~60mm 20 ~40mm 10 ~40mm 10 ~34mm 10 ~34mm 10 ~30mm 10 ~30mm 10 ~50mm 10 ~50mmWithstand Voltage 5550Vrms 5550Vrms 5550Vrms 5550Vrms 2000Vrms 3700Vrms 3700Vrms 3700Vrms 3700Vrms 5550Vrms 5550VrmsTrue RMS @ @

Cont. Buzzer @ @ @ @ @ @ @

Data Hold @ @ @ @ @ @ @ @ @ @ @

Diode Test @ @ @ @ @ @ @

Auto Power Off @ @ @ @ @ @

Leakage Current @

Auto Range @ @ @

Range Hold @ @

Relative @

Bargraph @ @

See Catalog Page 13 13 13 13 14 14 14 14 14 15 15

Insulation Resistance Tester Selection GuideDG525 DG251 DM1528S DM5218S DM1008S DM508S PDM508SDigital Digital Analog Analog Analog Analog Analog

Test Voltage500V/2000MΩ 250V/2000MΩ 1000V/2000MΩ 500V/1000MΩ 1000V/2000MΩ 500V/1000MΩ 500V/100MΩ250V/2000MΩ 125V/2000MΩ 500V/1000MΩ 250V/500MΩ

250V/500MΩ 125V/200MΩACV 600V 600V 600V 600V 600V 600V 600VDCV 60V 60V 60V 60V 60VBacklight @ @

Data Hold @ @

Auto Power Off @ @

Auto Discharge @ @ @ @ @

See Catalog Page 15 15 16 16 16 16 16

4

DIGITALMULTIM

ETER

P C SO FTW A RE

PC Link Plus / PC Link The PC Link Plus and PC Link application allows you to Link, and appear in a graph on window in an instant. log measuring data into PC through RS232 port with SANWA Digital Multimeter PC series. Logged data can be saved in PC as a file (csv file for-

mat). Logged data can be analyzed more in detail with Measuring data are transferred to PC Link Plus or PC applications such as spreadsheet application software.

FeaturesReal time graph display with channels for Plus) Data logger • Start and Stop acquisition

scaled grid • Import and saving of graphs • Select acquisit ion t ime command through LAN (Plus)• Print and Copy displayed in bitmap file (BMP) format Interval from 1. to 59 sec. by

graph screen • Open both bitmap graph file 1 sec-step, from 1 to 59 min Operation system: Windows • Page Scroll and CSV data file in a graph by 1 min-step, from 1 to 4 95/98, NT4.0/2000/ME/XP • Graph zoom in or out, vertical window hours by 1 hour-step

and horizontal scroll (Plus) • Beep when out of set value Remark: (Plus) Function • X-axis 1,000 points Window as a comparator comes with only PC Link Plus • Manual or Auto setting of Y-axis • Realtime display of MAX & • Progress bar (Indication of PC Link Plus: up to 4 channel • Graph markers added to MIN value with time stamp remainder capacity of data data logging

graphs (Plus) • Relative value indication buffer) PC Link: 1 channel data logging• Indication of comparator limit- • Current measuring value win- • Creating automatic backup

ed line on a graph dow data file Command • 4 channel data logging with 4

Data file More functions with optional DMMs (Plus) • Save data as CSV file with accessories

date and number • Measurement by clamp probe Network• Simultaneous direct data • Temperature measurement • Remote monitoring through

transfer to Excel with DDE (4 by temperature probe LAN (Plus)

Network (LAN)

˚C Hz C Ω A V RS232cable

Temperature probe USB connectionClamp probe

The USB device is supported by an USB-RS232C converting adapter.

Serial port (RS232C port)

LAN Operation of the USB-RS232C convert-USB port

Remote ing adapter "USB-RSA" from I.O. Data (Start or Stop Equipment Co., Ltd. has been con-

acquisition command) USB adapter Parallel port firmed for one-to-one connection. For

(Printer port) further details, visit our web site. For connection of the USB-RSA and cable, converting adapters with 25 pins

PC Link Plus (female) and 9 pins (male) are required.

IEC 1010 Safety standards IEC1010, Overvoltage category [Regarding the Safety Standards (IEC1010)] IEC1010 is an international safety standard for measuring devices and electrical equipment in order to protect operators and their surroundings. [Overvoltage category] For the purpose of safe and appropriate use of measuring devices, the IEC standards has safety levels for overvoltage categories I through IVdepending on the object measured.The larger the number of the category, the higher the amount of transient electrical energy. Therefore, measuring objects that belong to a higher cate-gory with measuring devices for lower categories is strictly prohibited as it may cause a serious accident.

The overview of each overvoltage category is as follows: distribotion box Overvoltage category I: Secondary electric circuit within a device connected to the plug socket through the

C A T W @

m eter

C A T

C A T

C A T

power transformer, etc. Overvoltage category II: Primary electric circuit of an apparatus that has a power cord connected to the plug socket. Overvoltage category III: Primary electric circuit and lead from the tap to the plug socket of a device where the outlet

outlet power is applied directly from a distribution board.

Overvoltage category IV: Electric circuit between an incoming line and distribution board

CE marking A CE marking is affixed only to those products that meet the safety requirements for the EC directive (the European Community Councilof Ministers Directive). Products with the CE marking are designed to comply with the "Low Voltage Directive" and "EMC Directive"based on the EC directive.Low Voltage Directive: This directive is for products with a supply voltage of 50 to 1000 V (AC) and 75 to 1500 V (DC). Safety stan-

dards to prevent electric shock and burn,etc. are stipulated in this directive.The standard is EN61010 and it corresponds to IEC1010.EMC Directive: This directive stipulates the prevention of strong electromagnetic waves from products and the sensitivity of products to electromag-netic waves from external sources.

5

6

50m /500m /5/50/500/1000V

50m /500m /5/50/500/1000V

50n/500n/5 ˚/50 ˚/500 ˚/9999 ˚F

-50 `1000 @

5H z `125kH z

500 ˚/5m /50m /500m /5/10A

500 ˚/5m /50m /500m /5/10A

50/500/5k/50k/500k/5M /50M ¶ @

0.08% +2

0.5% +3

0.2% +4

0.6% +3

0.2% +2

0.8% +3

0.3% +3

0.01% +2

Function M easuring Range Best Accuracy Resolution Input Im pedance

10M ¶ @10 ˚V

10 ˚V

0.1 ˚A

0.1 ˚A

10m ¶ @

0.01nF

1 @

0.001H z

D CV

ACV

D CA

ACA

Resistance

Capacitance

Tem perature

Frequency

Continuity

D iode Test

Buzzer sounds at betw een 20 ¶ and 120 ¶. O pen voltage: Approx. 3V

Batt/Fuse12.5A/500V IR 20kA 6.3 ~32

0.63A/250V IR 1.5kA 5.2 ~20

Standard Features Included

O pen voltage: Approx. 3.5V

6LF22(9V) x 1

Size/W eight H 179 ~W 87 ~D 55m m 460g (including protective holster)

Accuracy: }(rdg.% + dgt.) 18 `28 A75% RH m ax. N o condensation

Test Lead (TL-82), Clip Lead (CL-13), K-type therm ocouple @(K-250PC), H olster (H -50), Instruction M anual

PC520M

• AC True RMS• 3-4/5 digits 5000 count • 0.08% Basic Accuracy• Selectable 5 sensitivity for Hz • 0.01 ohm resolution • 0.01m V AC/DC resolution• K-type temperature –50°C ~ 1000°C• Capacitance 0.01nF up to 9.999mF• Auto power off (Enable or Disable)• Fast response Cont. Buzzer• Fast speed bargraph (60times/sec.)• Tilt standÓ ïîïà áûëà ñîáàêà • Set off Beeper• Protective holster

Data Logging mode• Logging 43,000 data points in built-in memory• Call and Scrolling logged data in the LCD• MAX & MIN logged data can appear in the LCD• Search of MAX & MIN logged data at turning

point• Selection of measurement interval from

0.05s, 1s, 20s, 40s, 1min, 2min, 4min or8min (From 0.2s for °C & ohm, 0.4s for Hz )

• Automatic Standby mode during data log-ging to extend battery life

• Automatic stop of data logging when batter-ies are low to guarantee accuracy of everylogged datum

• Download logged data to PC

Optional accessoriesSoftware: PCLink, PCLink Plus Optical RS232 cable: KB-RS2 K type adapter: K-AD

43,000 Points Data Logging in built-in Memory

RMS Hz @RS232C

RNGHOLD

DATAHOLD

TLRCal

APOFF

PC5000

• 0.03% Áàçîâàÿ dfsdfs• AC / AC + DC True RMS• 4-4/5 digits 50000 counts

(selectable 5-4/5 digits 500000 counts for DCV & Hz) • Selectable 5 sensitivity for Hz• 0.01 ohm resolution • 0.01m V AC/DC resolution• Line, Logic Frequency measurement• Frequency 0.0001Hz resolution• dBm 20 selectable reference impedance• 4 - 20mA % measurement• Capacitance 0.01nF up to 9.999mF• Duty Cycle measurement• Capture (peak hold) 0.8ms in duration• MAX, MIN, MAX-MIN recording mode• Data hold, Relative Value• Auto power off (Enable or Disable)• Fast response Cont. Buzzer• Tilt stand• Set off Beeper function• Protective holster

Display: numeral display 50000 & 500000 selectable, Bargraph 52 segments Sampling rate: 5 times / sec for 50000 count numeral display, 1.25 times / sec for 500000 count numeral display, 60 times / sec for BargraphBandwidth: V:45Hz~1kHz, 1kHz~20kHz(below 500V), A:40Hz~1kHz Safety: IEC1010 CAT.III 600V Max / CAT.II 1000V Max

50000 count & 500000 count selectable AC / AC + DC True RMS

RMS Hz CaptureRS232C

MAXMINREL

RNGHOLD

DATAHOLD

APOFF Duty


10M ¶ @0.03% +2

0.8% +60

0.1% +2

1.0% +4

0.2% +6

0.8% +3

0.002% +4

0.002% +4

10 ˚V

10 ˚V

0.01 ˚A

0.01 ˚A

10m ¶ @

0.01nF

0.01 @

0.0001H z

0.0001H z

D CV

ACV (AC+D C)

D CA

ACA (AC+D C)

Resistance

Capacitance

Frequency

Logic Frequency

Continuity

D iode Test

Batt/Fuse12.5A/500V IR 20kA 6.3 ~32

0.63A/250V IR 1.5kA 5.2 ~20


5 00m /5/50/500/1000V

500m /5/50/500/1000V

500 ˚/5m /50m /500m /5/10A

500 ˚/5m /50m /500m /5/10A

500/5k/50k/500k/5M /50M ¶ @

50n/500n/5 ˚/50 ˚/500 ˚/9999 ˚F

5H z `200kH z

5H z `2M H z

3d/kH z+2

0.25dB+2

}d25 @

D uty Cycle

dBm

% 4 `20m A

0.1% `99.99%

-11.76dBm `54.25dBm at 600 ¶ @

4m A=0% , 20m A=100% ,

O pen voltage: Approx. 3.5V

6LF22(9V) x 1



Buzzer sounds at betw een 20 ¶ and 200 ¶. O pen voltage: Approx. 3V

Test Lead (TL-82), Clip Lead (CL-13), H olster (H -50), Instruction M anual-

Optional accessoriesSoftware: PCLink, PCLink PlusOptical RS232 cable: KB-RS2Temperature probe: T-300PC

Clamp probe: CL-20D, CL-22ADCarrying case: C-CD

Temperature probe: K-8-250~800Clamp prove: CL-20D, CL-22ADCarrying case: C-CD

RMS Hz REL RS232CTrue RMS Capacitance Frequency Relative

RS232output

RNGHOLD

RangeHold@Temperature DATA

HOLDTLRCal

DataHold

Test LeadResistanceCalibration

http://www.sanwa-meter.co.jp

Display: numeral display 5000, Bargraph 52 segmentsSampling rate: 5 times / sec, 60 times / sec for BargraphBandwidth: 40Hz~20kHz (below 500V), 40Hz~1kHz (ACA)Safety: IEC1010 CAT.III 600V Max / CAT.II 1000V Max

D IG ITA L M U LTIM ETER

DIGITALMULTIM

ETER

Duty4-20mA%Cont. Buzzer APOFF

Auto PowerOff

MAXMIN

MAX MINRecording Capture Capture

(Peak Hold) dbm Duty

@


DIGITALMULTIM

ETER

PC510High Accuracy True RMS Multi Function • AC True RMS • 3-4/5 digits 5000 count • 0.08% Basic Accuracy • Selectable 5 sensitivity for Hz • 0.01 ohm resolution • 0.01m V AC/DC resolution • K-type temperature –50°C~1000°C• Capacitance 0.01nF up to 9.999mF • Capture (peak hold) 5ms in duration • MAX, MIN, MAX-MIN recording mode • Zoom bargraph (x 5 times) • Data hold, Relative Value • Auto power off (Enable or Disable) • Fast response Cont. Buzzer • Fast speed bargraph(60times/sec.) • Tilt stand • Set off Beeper • Protective holster

RS232C RMS Hz REL Capture

MAXMIN

RNGHOLD

DATAHOLD

TLRCal

Function M easuring Range Best Accuracy

APOFF

Resolution Input Im pedance

10 ˚V 10M ¶ @

10 ˚V

0.1 ˚A

0.1 ˚A

10m ¶ @

0.01nF

1 @

0.001H z

D CV 0.08% +250m /500m /5/50/500/1000V

ACV 0.5% +350m /500m /5/50/500/1000V

D CA 0.2% +4500 ˚/5m /50m /500m /5/10A

ACA 0.6% +3500 ˚/5m /50m /500m /5/10A

Resistance 50/500/5k/50k/500k/5M /50M ¶ @0.2% +2

Capacitance 0.8% +350n/500n/5 ˚/50 ˚/500 ˚/9999 ˚F

Tem perature 0.3% +3-50 `1000 @

Frequency 0.01% +25H z `125kH z

Continuity Buzzer sounds at betw een 20 ¶ and 120 ¶. O pen voltage: Approx. 3V

D iode Test O pen voltage: Approx. 3.5V

12.5A/500V IR 20kA @ 6.3 ~32Batt/Fuse 6F22(9V) x 1

0.63A/250V IR 1.5kA @ 5.2 ~20


Standard Features @Test Lead (TL-82), K-type therm ocouple (K-250PC), @ Included H olster (H -50), Instruction M anual


Optional accessories Display: numeral display 5000, Bargraph 52 segments Software: PCLink, PCLink Plus Temperature probe: K-8-250~800 Sampling rate: 5 times / sec, 60 times / sec for Bargraph Optical RS232 cable: KB-RS2 Clamp prove: CL-20D, CL-22AD Bandwidth: 40~20kHz (below 500V), 40~1kHz (ACA)

K type adapter: K-AD Carrying case: C-CD Safety: IEC1010 CAT.III 600V Max / CAT.II 1000V Max

PC500 HzRS232C

RNGHOLD

DATAHOLD

TLRCal OFF

AP

High Accuracy Multi Function

• 3-4/5 digits 5000 count • 0.08% Basic Accuracy • Selectable 5 sensitivity for Hz • 0.01 ohm resolution • 0.01m V AC/DC resolution • Capacitance 0.01nF up to 9.999mF • Data hold • Auto power off (Enable or Disable) • Fast speed bargraph(60times/sec.) • Tilt stand • Set off Beeper • Protective holster Optional accessories Software: PCLink, PCLink Plus Optical RS232 cable: KB-RS2 Temperature probe: T-300PC Clamp prove: CL-20D, CL-22AD Carrying case: C-CD

PC20


D CV 50m /500m /5/50/500/1000V 10 ˚V0.08% +2 10M ¶ @

ACV 50m /500m /5/50/500/1000V 0.5% +3 10 ˚V

D CA 500 ˚/5m /50m /500m /5/10A 0.1 ˚A0.2% +4

ACA 0.1 ˚A500 ˚/5m /50m /500m /5/10A 0.6% +3

Resistance 50/500/5k/50k/500k/5M /50M ¶ @0.2% +2 10m ¶ @

Capacitance 0.8% +3 0.01nF50n/500n/5 ˚/50 ˚/500 ˚/9999 ˚F

Frequency 0.001H z0.01% +25H z `125kH z

Continuity Buzzer sounds at betw een 20 ¶ and 120 ¶. O pen voltage: Approx. 3V

D iode Test O pen voltage: Approx. 3.5V

12.5A/500V IR 20kA @ 6.3 ~32Batt/Fuse 6F22(9V) x1

0.63A/250V IR 1.5kA @ 5.2 ~20


Standard Features Included Test Lead (TL-82), H olster (H -50), Instruction M anual


Display: numeral display 5000, Bargraph 52 segments Sampling rate: 5 times / sec, 60 times / sec for Bargraph Bandwidth: 40~20kHz (below 500V), 40~1kHz (ACA) Safety: IEC1010 CAT.III 600V Max / CAT.II 1000V Max

RS232C

RNGHOLD

DATAHOLD

APOFF

AC adapter • 3-3/4 digits 4000 count • Measuring data can be transferred to PC

through RS232 cable with PC Link • AC adapter is available for long time

measurement• Data-hold function, Range-hold function • Capacitance measurement • Safety cover for the 10A terminal to avoid

miss-insertion• Holster (for wall hanging and fixing test leads) • Tilt Stand Optional accessories Software: PC Link Optical RS232 cable: KB-RS1 USB cable: KB-USB AC adapter: AD-71AC(100V), AD-72AC(220V) Clip adapter: CL-11 Clamp Probe: CL-20D, CL-22AD Temperature Probe: T-300PC(Temperature can be measured on software PC Link.) Soft Case: C-C7 Carrying Case: C-PC10/S


D CV

ACV

400m /4/40/400/1000V 0.5% +2 100 ˚V D CV: @4/40/400/750V 1m V1.2% +5 10M `100M ¶

D CA 0.1 ˚A1.5% +2400 ˚/4000 ˚/40m/400m /4/10A ACV: @

ACA 0.1 ˚A1.8% +5400 ˚/4000 ˚/40m /400m /4/10A 10M `11M ¶ @Resistance 100m ¶ @

Capacitance

400/4k/40k/400k/4M /40M ¶ @1.2% +4

40n/400n/4 ˚/40 ˚/100 ˚F 1.0% +6 0.01nFContinuity Buzzer sounds at Approx. 60 ¶. O pen voltage: Approx. 0.4V

D iode Test O pen voltage: Approx.1.5V

0.5A/250V @ IR 300A @ 5 ~20 @

Batt/Fuse R6 ~2 12A/250V @ IR 500A @ 6.3 ~30


Standard Features Included Instruction M anual, Test Lead (TL-21), H olster (H -70)

Accuracy: }(rdg.% + dgt.) 18 `25 A80% RH m ax. N o condensati

Display: numeral display 3999, Sampling rate: 3 times / sec for numeral display, Bandwidth: 40~400HzSafety: IEC1010 CAT.III 600V Max/CAT.II DC1000V, 750V Max

When AC adapter use: IEC1010-1 CAT.III 200V Max

Auto PowerAPS Auto Power MAX MINAPOFF

CaptureMAXMIN ZoomCapture RMS True CapacitanceCont. Buzzer Save Off Recording (Peak Hold) RMS

7


RD701 NEWNEW

RMS MAXHOLD

RNGHOLD

DATA APREL HOLD OFF

Hz

High Input Impedance 1000MΩTrue RMS • 3-3/4 digits 4000 count • AC True RMS • ADP Function • Auto power off (Enable or Disable) • K-type temperature measurement • MAX Data Hold • Relative Function • Alarm for mis-plug for current function

Optional accessories Clamp probe: CL-20D, CL-22AD Carrying case: C-CD K-type adapter: K-AD


Display: numeral display 4000 (Hz: 9999, Capacitance: 5000) Sampling rate: 3 times/sec. (Hz: 2 times/sec.) Bandwidth: V: 45Hz~1kHz, 1kHz~20kHz (below 500V), A: 40Hz~1kHz Safety: IEC61010 CAT.III 600V Max / CAT.II 1000V Max


D CV 400m /4/40/400/1000V 0.3% +4 0.1m V 10M ` @ 1000M ¶ @ ACV 400m /4/40/400/1000V 1.5% +5 0.1m V

D CA 400 ˚/4000 ˚/40m /400m /4/10A 1.2% +3 0.1 ˚A

ACA 400 ˚/4000 ˚/40m /400m /4/10A 1.5% +4 0.1 ˚A

Resistance 400/4k/40k/400k/4M /40M ¶ @ 0.6% +4 0.1 ¶ @

Capacitance 500n/5 ˚/50 ˚/500 ˚/3000 ˚F 2.5% +6 0.1nF

Tem perature -20 `300 @ 2% +3 1 @

Frequency 50H z `1M H z 0.5% +4 0.01H z

Continuity Buzzer sounds at betw een 20 ¶ and 120 ¶. O pen voltage: Approx. 0.4V


Batt/Fuse 6F22(9V) ~1

12.5A/500V @ @IR 20kA @ 6.3 ~32m m @0.63A/250V @ @IR 1.5kA @ 5.2 ~20m m


Standard Features Included Test Lead (TL-82), K-type therm ocouple(K-250PC), H olster (H -50), Instruction M anual

HzMAXHOLD

RD700 NEWNEWRNGHOLDREL DATA

HOLDAPOFF

High Input Impedance 1000MΩ• 3-3/4 digits 4000 count • ADP Function • Auto power off (Enable or Disable) • K-type temperature measurement • MAX Data Hold • Relative Function • Alarm for mis-plug for current function


D CV 400m /4/40/400/1000V 0.3% +4 0.1m V 10M ` @ 1000M ¶ @ACV 400m /4/40/400/1000V 1.5% +5 0.1m V

D CA 400 ˚/4000 ˚/40m /400m /4/10A 1.2% +3 0.1 ˚A

ACA 400 ˚/4000 ˚/40m /400m /4/10A 1.5% +4 0.1 ˚A


Capacitance 500n/5 ˚/50 ˚/500 ˚/3000 ˚F 2.5% +6 0.1nF

Tem perature -20 `300 @ 2% +3 1 @

Frequency 50H z `1M H z 0.5% +4 0.01H z



Batt/Fuse 6F22(9V) ~1

12.5A/500V @ @IR 20kA @ 6.3 ~32m m @0.63A/250V @ @IR 1.5kA @ 5.2 ~20m m


ndard Features Included Sta Test Lead (TL-82), K-type therm ocouple(K-250PC), H olster (H -50), Instruction M anual

Optional accessories Clamp probe: CL-20D, CL-22AD Carrying case: C-CD K-type adapter: K-AD

Display: numeral display 4000 (Hz: 9999, Capacitance: 5000) Sampling rate: 3 times/sec. (Hz: 2 times/sec.) Bandwidth: V: 45Hz~1kHz, 1kHz~20kHz (below 500V), A: 40Hz~1kHz Accuracy: }(rdg.% + dgt.) 18 `28 A75% RH m ax. N o condensati

Safety: IEC61010 CAT.III 600V Max / CAT.II 1000V Max

CD751 RMS APSHOLDDATAHOLD

RNG

True RMS & Wide current • 3-3/4 digits 3200 count • AC + DC True RMS • Wide current measurement function

(0.01 µA to 20 A) • Automatic/manual measurement with the current

range (excluding 32 µA and 20 A) • W 52 x H 26.5mm Large LCD • Safety cover for the terminal for large current

(20 A) to avoid miss-insertion. • Holster (for wall hanging and fixing test leads)


D CV 320m /3.2/32/320/1000V 0.5% +2 100 ˚V D CV: @ 10M `100M ¶ACV: @ 10M `100M ¶

@

@

ACV 3.2/32/320/750V 1.2% +8 1m V

D CA 32 ˚/320 ˚/3200 ˚/32m /320m /20A 1.4% +2 0.01 ˚A

ACA 32 ˚/320 ˚/3200 ˚/32m /320m /20A 1.8% +10 0.01 ˚A

Resistance 320/3.2k/32k/320k/3.2M /30M ¶ @ 1.2% +2 100m ¶ @

Continuity Buzzer sounds at Approx.20 ¶. O pen voltage: Approx. 1.3V

D iode Test O pen voltage: Approx.3V

Batt/Fuse R6P ~2

0.5A/250V @ @IR 300A @ 5.2 ~20m m @20A/250V @ @IR 1000A @ 6.35 ~31.8m m

Size/W eight H 165.5 ~W 78 ~D 41.5m m Approx. 315g (including protective holster)

ndard Features Included Sta Instruction M anual, Test Lead (TL-21), H olster (H -70)

• Tilt Stand Accuracy: }(rdg.% + dgt.) 18 `25 A80% RH m ax. N o condensation

Optional accessories Clamp Probe: CL-20D, CL-22AD High Voltage Probe: HV-60, Carrying Case: C-C7

Display: numeral display 3200, Bargraph 32 segments, Sampling rate: 2 times / sec for numeral display,12 times / sec for Bargraph Bandwidth: 40~500Hz(3.2V), 40~1kHz(higher than 3.2V), Safety: IEC1010 CAT.III 600V Max / CAT.II DC1000V, AC750V Max

DIGITALMULTIM

ETER

MAXHOLD Hz DATA

HOLDTest LeadMax Temperature REL RS232RS

232CRangeRNG

HOLDDataFrequency Relative TLR

Cal Resistancehold output Hold Hold Calibration

8

DIGITALMULTIM

ETER


CD731RNGHOLD

DATAHOLD

APOFF

Wide current (0.01 µA to 20 A)• 3-3/4 digits 3200 count • Automatic/manual measurement with the current

range (excluding 32 µA and 20 A range). • W 52 x H 26.5mm Large LCD • Safety cover for the terminal for large current

(20 A) to avoid miss-insertion • Data-hold function, Range-hold function • Holster (for wall hanging and fixing test leads) • Tilt Stand

Optional accessories Clamp Probe: CL-20D, CL-22AD Accuracy: }(rdg.% + dgt.) 18 `25 A80% RH m ax. N o condensation


D CV 320m /3.2/32/320/1000V 0.5% +2 100 ˚V D CV: @ 10M `100M ¶ @ ACV: @ 10M `100M ¶ @

ACV 3.2/32/320/750V 1.2% +5 1m V

D CA 32 ˚/320 ˚/3200 ˚/32m /320m /20A 1.4% +2 0.01 ˚A

ACA 32 ˚/320 ˚/3200 ˚/32m /320m /20A 1.8% +5 0.01 ˚A


Continuity Buzzer sounds at Approx.20 ¶. O pen voltage: Approx.1.3V


Batt/Fuse R6P ~2

0.5A/250V @ @IR 300A @ 5.2 ~20m m

20A/250V @ @IR 1000A @ 6.35 ~31.8m m@

Size/W eight H 165.5 ~W 78 ~D 41.5m m Approx.310g (including protective holster)@

Standard Features Included Instruction M anual, Test Lead (TL-21), H olster (H -70)

High Voltage Probe: HV-60 Carrying Case: C-C7

Display: numeral display 3200, Bargraph 32 segments, Sampling rate: 2 times / sec for numeral display, 12 times / sec for Bargraph Bandwidth: 40~400Hz, Safety: IEC1010 CAT.III 600V Max / CAT.II DC1000V, AC750V Max

CD721RNGHOLD

DATAHOLD

APOFF

Slim Standard DMM • 3-3/4 digits 3200 count • Automatic/manual measurement with A mA

(excluding 12 A range) • W 52 X H 26.5mm Large LCD • Data-hold function, Range-hold function • Auto Power off • Holster (for wall hanging and fixing test leads) Optional accessories Clamp Probe: CL-20D, CL-22AD High Voltage Probe: HV-60


D CV 320m /3.2/32/320/1000V 0.5% +2 100 ˚V D CV: @ 10M `100M ¶ACV: @ 10M `100M ¶

@

@

ACV 3.2/32/320/750V 1.2% +5 1m V

D CA 32m /320m /12A 1.4% +2 0.01m A

ACA 32m /320m /12A 1.8% +5 0.01m A


Continuity Buzzer sounds at Approx.20 ¶. O pen voltage: Approx. 1.3V


Batt/Fuse R6P ~2

0.5A/250V @ @IR 300A @ 5.2 ~20m m @

12A/250V @ @IR 500A @ 6.3 ~30m m

Size/W eight H 165.5 ~W 78 ~D 41.5m m Approx.290g (including protective holster)

ndard Features Included Sta Instruction M anual, Test Lead (TL-21), H olster (H -70)

Carrying Case: C-C7 Accuracy: }(rdg.% + dgt.) 18 `25 A80% RH m ax. N o condensati

Display: numeral display 3200, Bargraph 32 segmentsSampling rate: 2 times / sec for numeral display, 12 times / sec for BargraphBandwidth: 40~400HzSafety: IEC1010 CAT.III 600V Max / CAT.II DC1000V, AC750V Max

CD800a NEWNEWRNGHOLD

DATAHOLD

RELAPOFF

DutyHz

Attachment body cover • 3-3/4 digits 4000 count • Auto power off (Enable or Disable) • Relative Function

Sampling rate: 2 times/sec. Bandwidth: 40~400HzSafety: IEC61010 CAT.III 600V Max


D CV 400m /4/40/400/600V 0.7% +3 0.1m V 10M `100M ¶ @

ACV 4/40/400/600V 1.6% +5 0.001V

D CA 40m /400m A 2.2% +5 0.01m A

ACA 40m /400m A 2.8% +5 0.01m A


Capacitance 50n/500n/5 ˚/50 ˚/100 ˚F 5% +10 0.01nF

Frequency 5H z `100kH z 0.5% +3

D uty Cycle 20% `80% 0.5% +5



Batt/Fuse R06(1.5V) ~20.5A/250V @ @IR 300A @ 6.3 ~30m m

Size/W eight H 176 ~W 104 ~D 46m m 340g

ndard Features Included Sta Instruction M anual


RangeHz DATAHOLD

DataCapacitance Frequency REL Relative RNGHOLD Cont. BuzzerHold Hold

9


DLC-400AMax400A DCVLEAK

Leakage Current • 0.01 mA (leakage current resolution) to 400 A • Data Hold • Data transfe

(output: DC200mV Max.)

Display: numeral display 1999 Sampling rates: 2 times / sec. Bandwidth: 50/60Hz

Function M easuring Range Accuracy

ACA 20m /200m /2000m /20/200/400A 1% }0.25

ACV 2/20/200/600V 1% }0.5

D CV 200m /2/20/200/600V 1% }0.5

Resistance 200/2k/20k/200k/2000k/20M ¶ @ 1% }0.5

D isplay 1999

Clam p D iam eter

onductor Size 38m m

C 10 ~40m m

W ithstand Voltage 2000Vrm s

Batt R03 ~2

Size/W eight H 205 ~W 84 ~D 34m m /Appox. 390g

Included Standard Features Instruction M anual, Carrying Case @

Test Lead(TL-61) @

Accuracy Assurance Tem perature/H um idity Range F @ 18 `28 @80% RH N o condensation

DCM400AD Max400A DCV DCA

Mini AC/DC Current 400A • Auto range • One push calibration for DCA • Relative measurement • Data hold, Range hold • Cont. Buzzer, Diode Test • Auto power off • Low power indication • DMM function

Display: numeral display 3999, Bargraph 42 segments Sampling rate: 2 times / sec for numeral display, 12 times / sec for Bargraph Bandwidth: 50~500Hz Safety: IEC1010 CAT.III 300V / CAT.II 600V


ACA 40/400A 2% }10

D CA 40/400A 2.5% }10

ACV 400/600V 1.5% }5

D CV 400/600V 1% }2

Resistance 400 ¶ @ 1% }2

D isplay 4000

Clam p D iam eter 25m m

Conductor Size 10 ~34m m

W ithstand Voltage Less than 3700Vrm s

Batt LR03 ~2

Size/W eight H 193 ~W 50 ~D 28m m /Approx. 230g


Test Lead(TL-88) @


DCM400Max400A DCV Hz

Mini AC Current 400A • Auto range • Frequency measurement by clamp or test leads • Data hold, Range hold • Cont. Buzzer, Diode Test • Auto power off • Low power indication • DMM function

Display: numeral display 3999, Bargraph 42 segments Sampling rate: 2 times / sec for numeral display, 12 times / sec for Bargraph Bandwidth: 50~60Hz (ACA: 1.9% }5), 60~500Hz (ACA:2.5% }5), 50~500Hz (ACV) Safety : IEC1010 CAT.III 300V/ CAT.II 600V


ACA 40/400A 1.9% }5

ACV 400/600V 1.5% }5

D CV 400/600V 1% }2

Resistance 400 ¶ @ 1% }2

Frequency(A) 20 `4k/10kH z 0.1% }1

Frequency(V) 4k/40k/400k/1M H z 0.1% }1

D isplay

lam p D iam eter

onductor Size

4000

C 25m m

C 10 ~34m m

W Less than 3700Vrm s

Batt

ithstand Voltage

R03 ~2



Test Lead(TL-88) @


DCM60/DCM60L Max600A

Mini & Low-cost AC Current 600A • Data Hold • Low power indication • Auto range (DCM60L) • Cont. Buzzer (DCM60L) • DMM function (DCM60L) • Diode Test (DCM60L)

Display: numeral display 1999 Sampling rate: 2 times / sec Bandwidth: 50~500HzSafety: IEC1010 CAT.III 300V / CAT.II 600V

Function D CM 60 D CM 60L Accuracy

ACA 20/200/600A 200/600A 2.0% +5 (50 `60H z) 2.9% +5 (60 `500H z)

ACV - 200/600V 1.5% +5 (50 `500H z)

Resistance - 200 ¶ @ 1.9% +3

D isplay

lam p D iam eter 1999 1999

C 21m m 21m m

W Less than3700Vrm s Less than3700Vrm s

Batt

ithstand Voltage

R03 ~2 R03 ~2


Included Standard Features @ Instruction M anual, Carrying Case, @

Test Lead(TL-88) for D CM 60L

Accuracy Assurance Tem perature/H um idity Range F23 }5 @ 80% RH N o condensation

CLAMPMETER

Hz Frequency DCV DCV DCA DCA

14


DM1528SDM5218S3 Test Voltage

• One-shot or continuous measure-ment push switch

• ACV measurement range (AC600V) • DCV measurement range (DC60 V) • Auto discharge function • Inner battery check range • Drop shockproof meter • Carrying case equipped

Safety: IEC1010 CAT.III 600V

0.2 2̀ `1000 2̀ 000M ¶/1000V

0.5 1̀ `500 `1000M ¶/500V

0.1 0̀ .5 `200 `500M ¶/250V

0.5 1̀ `500 `1000M ¶/500V

0.1 0̀ .5 `200 `500M ¶/250V

0.05 0̀ .2 `100 `200M ¶/125V

Accuracy

Accuracy

Accuracy

Insulation Resistance @ iM ¶ j @

ACV

D CV

Batt

Size/ W eight


600V

}5% of full scale (50/60H z sine w ave)

60V

}5% of full scale

6LR61(9V) ~1

H 144 ~W 99 ~D 43m m /Approx. 310g

Instruction M anual, Test Lead (TL-508S) ACarrying Case (C-08S)

D M 1528S D M 5218S

@}5% of reading (1st effective m easurem ent range: w ritten in bold @ type above ) }10% of reading ( 2nd effective m easurem ent range: @ w ritten in thin type above)

DM1528S 1000V 500V 250V

DM5218S 500V5250V 125V

2000M ¶ 1000M ¶ 500M ¶

1000M ¶ 00M ¶ 200M ¶

AUTODISDCV

DM1008SDM508SSingle Test Voltage

• One-shot or continuous measure-ment push switch



1 2̀ `1000 `2000M ¶/1000V 0.5 1̀ `500 `1000M ¶/500V

Accuracy

Accuracy

Accuracy

Insulation Resistance @ iM ¶ j @

ACV

D CV

Batt

Size/ W eight


600V


60V

}5% of full scale

6LR61(9V) ~1

H 144 ~W 99 ~D 43m m /Approx. 310g


D M 1008S D M 508S

}5% of reading (1st effective m easurem ent range: @ w ritten in bold type above) @ }10% of reading (2nd effective m easurem ent range: @

w ritten in thin type above)

DM1008S 1000V2000M ¶ @

DM508S 500V1000M ¶ @

AUTODISDCV

PDM508SSingle Test Voltage

• One-shot or continuous measurement push switch



PDM508S 100M ¶ @500V

0.05 0̀.1 `50 `100M ¶/500V

Accuracy

Accuracy

Accuracy

Insulation Resistance @

AUTO

iM ¶ j @

ACV

D CV

Batt

Size/ W eight


600V


60V

}5% of full scale

6LR61(9V) ~1

H 144 ~W 99 ~D 43m m /Approx. 310g


PD M 508S

}5% of reading (1st effective m easurem ent range: @ w ritten in bold type above) @ }10% of reading (2nd effective m easurem ent range: @

w ritten in thin type above)

DISDCV

INSULATION

RESISTANCETESTER

EARTH

TESTER

DCV DCVAutoDischarge

AUTODIS

16


23

for PC20,CD751,CD731,CD721, SP21,DCM2000R,DCM2000AD,DCM2000,DCM600,CAM610R,CAM600S,IEC1010 CATIII 600V, CATII 1000V Length 1m

TL-21forPC20,CD751,CD731,CD721,SP21,DCM2000R,DCM2000AD,DCM2000,DCM600,CAM610R,CAM600S, ø 0.7mm shape memory alloy test pin Length 1m

TL-21Mfor AU-31, CX-506, AX-313TR, YX-361TR, DLC-400A, LX-3131 Length 0.9m

TL-61

for DG525, DG251 Length 1m

TL-M54

CL-11 TL-8IC CL-506Alligator clip (Black & Red) for TL-21, TL-21M, TL-61, TL-84, TL-88, TL-91M, TL-95 Length 0.2m

for DM1528S, DM5218S, DM1008S, DM508S, PDM508S Length 1m

TL-508S

ø0.2mm pin Length 1m

TL-60

for AU-31, CX-506, AX-313TR, YX-361TR, DLC-400A, ø0.7mm shape memory alloy test pin

TL-91M

ø0.4mm pin Length 1m

TL-95

for TL-21, TL-21M, TL-60, TL-61, TL-84, TL-88, TL-91M, TL-95Length 0.2m

Alligator clip for AX-313TR, CX-506 Length 0.3m

CL-13Alligator clip (Black & Red) for TL-82 IEC1010 CATIII 1000V

for CP-7D only Length 0.9m

TL-84for DCM400AD, DCM400, DCM60LIEC1010 CATIII 600V, CATII 1000V Length 1.1m

TL-88for PC5000,PC520M,PC510,PC500, RD701. RD700, IEC1010 CATIII1000V, Length 1m

TL-82

Length 1m

ACCESSORY

C lip Lead

http: //www.s anwa-meter.co.jp

24

T-THP T-300PC T-450

K -600 K -1000

-20C ~200CThermistor probefor, C AM600S , C AM610RLength 0.9m

-50¡ C ~300¡ CP latinic thin filmfor PC 5000, PC 520M,PC 510, PC 500Length 2.2m

-50¡ C ~450¡ CP latinic thin filmfor S TH-500CLength 2.2m

-50¡ C ~600¡ CK -typefor S TH-1200Length 2.3m

-50¡ C ~1200¡ CK -typefor S TH-1200Length 2.6m

K -8-250 K -8-500

K -8-300 K -8-800 K -8-650

-160¡ C ~250¡ CK -type S urfacefor PC 520M, PC 510, R D701,R D700Length 1m

K -250PC-50¡ C ~250¡ CK -typeS tandardfor PC 520M,PC 510, R D701,R D700Length 1m

K -ADK-type adapter

AD-71ACfor PC 20Length 1.8m

100V AC

AD-72ACfor PC 20Length 1.8m

220V AC

-160¡ C ~500¡ CK -type S urfacefor PC 520M, PC 510, R D701,R D700Length 1m

-160¡ C ~300¡ CK -type S heathfor PC 520M,PC 510, R D701,R D700Length 1.2m

-160¡ C ~800¡ CK -type S heathfor PC 520M,PC 510, R D701,R D700Length 1.2m

-160¡ C ~650¡ CK -type F lexiblefor PC 520M,PC 510, R D701,R D700Length 1.4m

K-AD (Option)

K -type Tempinternational mini plug

dmm selection guide - viatoris.501.com1.ru · analog multitester selection guide au-31 cx-506...

Documents