doc 200 k 2016-03-22 · h 8/19/2014 cjb j 3/13/2015 cjb k 4/24/2015 cjb l 4/15/2016 cjb m 6/16/2016...

Revision Date By

NC 1/16/2009 CJB

A 9/30/2010 CJB

B 5/23/2012 CJB

C 9/18/2012 CJB

D 4/16/2013 CJB

E 9/19/2013 CJB

F 12/3/2013 CJB

G 4/11/2014 CJB

H 8/19/2014 CJB

J 3/13/2015 CJB

K 4/24/2015 CJB

L 4/15/2016 CJB

M 6/16/2016 CJB

N 8/2/2016 CJB

UTAS Landing Systems

Document 200 - Approved Processors

Original

Document 200 Text - Summary of Changes

Update to current practice

Added second last sentence to 5.0 fourth paragraph, corrected

Document 300 reference.

Added Note 7 to Notes tab, paint touch-up to exceptions tab

Data Updated: December 14, 2018

Revised the naming of the special processes on the

"Processes w RPN & Nadcap reqm't" tab.

Added Nadcap Exceptions tab, revised Nadcap reqm'ts table,

combined Note 7 into Note 1, revised Note 5.

Added STRESS RELIEF note 7 to Notes tab.

Added DDTC note 6 to Notes tab, and DDTC data to Listing tab

Entire document: UTAS was Goodrich

Added Notes Tab

Text tab: Content Server was LiveLink, 4.2 added description of

fourth thru sixth tabs

Nadcap Exceptions tab: revised CMSP to include the option for

Nadcap AC7109/8 accreditation for the grinding of HVOF

Revised the naming of the special processes in the SQA database

and thus also in Document 200.

Revised note 6 on Notes tab to differetiate ITAR vs. EAR controlled

military programs for the DDTC license.

Added Export Ctrl tab.

Landing Systems was Landing Gear, LS was LG, LS-SBU-A001-

SQA was Document 300. Add ISO17025 for NDT.

1.0 Purpose The purpose of this document is to a) identify special processes that require UTAS Landing Systems approval of sources performing the process, and to b) provide a list of approved sources for these processes. The following text is provided for guidance and informational purposes only. In the event of any conflict between this document and LS-SBU-A001-SQA, LS-SBU-A001-SQA takes precedence. 2.0 Applicability The UTAS Landing Systems Document 200 is applicable to suppliers and sub-tier sources of special processes where UTAS Landing Systems LS-SBU-A001-SQA is invoked by reference in UTAS Landing Systems purchase orders or LTA’s (Long Term Agreements). No deviation from the requirements contained within this document is permitted unless specifically defined in LS-SBU-A001-SQA, or with written concurrence of UTAS Landing Systems Supplier Quality Assurance.

The requirements of this document do not apply for “Raw Material” purchased to a metallic raw material specification (AMS, MIL, QQ-A, etc.) unless the processor is specifically required by applicable specifications. 3.0 Responsibility

UTAS Landing Systems Supplier Quality Assurance is responsible for the management and administration of the requirements contained within this document.

UTAS Landing Systems approved suppliers of product or services, where LS-SBU-A001-SQA is invoked on the pertinent purchase order or LTA’s, are responsible to comply with all applicable requirements contained within this document.

UTAS Landing Systems approved processors shall operate under a QMS Quality Management System (i.e. AS9100, Nadcap AQS, ISO17025, ISO9001, etc. as recognized by the applicable Nadcap task group) to obtain and maintain approval status. A QMS registration certificate can serve as proof of compliance; otherwise a LS audit for compliance may be required.

UTAS Landing Systems approved processors shall maintain Nadcap certification for those processes that require Nadcap certification. Document 200 defines the processes that require Nadcap certification. 4.0 General 4.1 Reference Documents Document No. Title LS-SBU-A001-SQA LS Supplier and Product Quality Requirements

1.0 Purpose The purpose of this document is to a) identify special processes that require UTAS Landing Systems approval of sources performing the process, and to b) provide a list of approved sources for these processes. The following text is provided for guidance and informational purposes only. In the event of any conflict between this document and LS-SBU-A001-SQA, LS-SBU-A001-SQA takes precedence. 2.0 Applicability The UTAS Landing Systems Document 200 is applicable to suppliers and sub-tier sources of special processes where UTAS Landing Systems LS-SBU-A001-SQA is invoked by reference in UTAS Landing Systems purchase orders or LTA’s (Long Term Agreements). No deviation from the requirements contained within this document is permitted unless specifically defined in LS-SBU-A001-SQA, or with written concurrence of UTAS Landing Systems Supplier Quality Assurance.

The requirements of this document do not apply for “Raw Material” purchased to a metallic raw material specification (AMS, MIL, QQ-A, etc.) unless the processor is specifically required by applicable specifications. 3.0 Responsibility

UTAS Landing Systems Supplier Quality Assurance is responsible for the management and administration of the requirements contained within this document.

UTAS Landing Systems approved suppliers of product or services, where LS-SBU-A001-SQA is invoked on the pertinent purchase order or LTA’s, are responsible to comply with all applicable requirements contained within this document.

UTAS Landing Systems approved processors shall operate under a QMS Quality Management System (i.e. AS9100, Nadcap AQS, ISO17025, ISO9001, etc. as recognized by the applicable Nadcap task group) to obtain and maintain approval status. A QMS registration certificate can serve as proof of compliance; otherwise a LS audit for compliance may be required.

UTAS Landing Systems approved processors shall maintain Nadcap certification for those processes that require Nadcap certification. Document 200 defines the processes that require Nadcap certification. 4.0 General 4.1 Reference Documents Document No. Title LS-SBU-A001-SQA LS Supplier and Product Quality Requirements

4.2 Definitions

Approved Processor listing: The listing of special processes, individual process specifications, and the sources approved by UTAS Landing Systems to perform these processes to the noted specifications. The UTAS Landing Systems authorized Approved Processor listing is an Excel file located on Content Server. The Excel file has six worksheets. The first worksheet has this requirements text, the second worksheet has the Approved Processor list, the third worksheet has a listing of revisions to the list, the fourth has Notes, the fifth lists which air craft platforms require export control, the sixth lists the controlled processes with their RPN and Nadcap accreditation requirement, and the seventh lists the exceptions to Nadcap accreditation requirements.

Approved Processor: A company that has been granted approved status for performing specific special processes as defined by the Approved Processor Listing. This approval is based on compliance to the quality system requirements of this document, and compliance to the listed process specification(s).

Approved Supplier: A company that has been granted approved status for supplying product to UTAS Landing Systems based on compliance to the quality management system requirements of LS-SBU-A001-SQA. Special Processes: Only those processes listed on the Processes tab (sixth tab) are considered by UTAS Landing Systems to be controlled special processes that require the entity performing the process to be pre-approved by UTAS Landing Systems. This may include processes that do not require approval by UTAS Landing Systems customers and may not include processes for which approval is required by UTAS Landing Systems customers.

5.0 Approved Processor Listing

UTAS Landing Systems Supplier Quality Assurance is responsible for maintaining the Approved Processor listing. The listing is revised as changes are received, reviewed, and approved by the Supplier Quality Assurance organization. The listing as posted on Content Server is refreshed on a periodic basis, approximately monthly, or as often as required.

It is the responsibility of approved suppliers to regularly review the listing to determine approval status of sources being used.

Document 200 approvals are address or site specific. When special process companies are comprised of more than one physical site, each physical site shall be approved individually by address in order to be contracted for use on LS product.

The listing will only contain specifications that are UTAS Landing Systems’s, government issue, or industry standards. UTAS Landing Systems’s customers (e.g. Boeing, Lockheed, etc.) do not permit LS to list approval to their specifications; hence their specifications (e.g. BAC’s, PS’s, 5PTP’s, etc.) will not appear in the listing. When UTAS Landing Systems customer controlled processes are required, (e.g. Boeing BAC’s, PS’s, Lockheed 5PTP’s, etc.), selected process sources must be listed in both the UTAS Landing Systems listing as approved for quality system, and also be in the customer’s listing (e.g. Boeing D1-4426, Lockheed QCS-001, etc.) as approved for the controlled process. Approval to perform a customer approved special process on LS product is limited to the Special Processes approved for this company as listed on LS Document 200. Refer to LS-SBU-A001-SQA paragraph 12.2.2.

UTAS Landing Systems approval of a processor does not guarantee product processed by that processor is acceptable and use of approved processors does not relieve the UTAS Landing Systems supplier from the obligation to provide finished product in compliance with purchase order and engineering requirements. Processor, specification, and/or process approvals listed on Doc 200 may be revoked at any time by LS due to various reasons that include but are not limited to: Nadcap audit failures, lack of work being performed on LS product, processor initiated escapes and/or disclosures, changes in equipment at approved sources (no longer performing certain special processes), relocation of approved sources, site closures at approved sources, modifications to specifications.

5.0 Approved Processor Listing

UTAS Landing Systems Supplier Quality Assurance is responsible for maintaining the Approved Processor listing. The listing is revised as changes are received, reviewed, and approved by the Supplier Quality Assurance organization. The listing as posted on Content Server is refreshed on a periodic basis, approximately monthly, or as often as required.

It is the responsibility of approved suppliers to regularly review the listing to determine approval status of sources being used.

Document 200 approvals are address or site specific. When special process companies are comprised of more than one physical site, each physical site shall be approved individually by address in order to be contracted for use on LS product.

The listing will only contain specifications that are UTAS Landing Systems’s, government issue, or industry standards. UTAS Landing Systems’s customers (e.g. Boeing, Lockheed, etc.) do not permit LS to list approval to their specifications; hence their specifications (e.g. BAC’s, PS’s, 5PTP’s, etc.) will not appear in the listing. When UTAS Landing Systems customer controlled processes are required, (e.g. Boeing BAC’s, PS’s, Lockheed 5PTP’s, etc.), selected process sources must be listed in both the UTAS Landing Systems listing as approved for quality system, and also be in the customer’s listing (e.g. Boeing D1-4426, Lockheed QCS-001, etc.) as approved for the controlled process. Approval to perform a customer approved special process on LS product is limited to the Special Processes approved for this company as listed on LS Document 200. Refer to LS-SBU-A001-SQA paragraph 12.2.2.

UTAS Landing Systems approval of a processor does not guarantee product processed by that processor is acceptable and use of approved processors does not relieve the UTAS Landing Systems supplier from the obligation to provide finished product in compliance with purchase order and engineering requirements. Processor, specification, and/or process approvals listed on Doc 200 may be revoked at any time by LS due to various reasons that include but are not limited to: Nadcap audit failures, lack of work being performed on LS product, processor initiated escapes and/or disclosures, changes in equipment at approved sources (no longer performing certain special processes), relocation of approved sources, site closures at approved sources, modifications to specifications.

6.0 Special Process Specification Requirements

Special processes are to be performed to the latest released revision of the noted specification, or to the latest released revision of a noted superseding specification, unless otherwise limited by a) notation on the approved special process listing, or b) purchase order requirements. An index of specifications and revisions applicable to product being manufactured to meet UTAS Landing Systems requirements is available on Content Server. It is the responsibility of the supplier to review the index and revision log to the extent and frequency needed to ensure compliance to the listed revision levels of the noted specifications. Should a UTAS Landing Systems customer controlled specification have a formally released revision later than noted on the index, use of the later revision is acceptable. The use of a previous revision than that listed on the UTAS Landing Systems index is not acceptable, unless authorized by written concurrence by UTAS Landing Systems Supplier Quality Assurance prior to any performance of the special process to the previous revision requirements.

7.0 Processor Approval Process

Approval of a new processor, or approval of additional specification(s) and/or additional processes for a processor already approved, is only considered when either a UTAS Landing Systems facility or an LS approved supplier is requesting the source’s approval. Requests for approval must be made in writing to Suppy Chain Management using form LS DIV SQA FORM 4065 - Request for Processor Approval (available on Content Server) stating the processor’s company information and listing the processes the supplier is requesting the processor to support. Due to various reasons, including resource limitations, a request for approval may be denied; or only partially approved. UTAS Landing Systems will perform periodic surveillance of approved processors as deemed necessary to grant and/or maintain approval status.

UTAS Landing GearDocument 200 Approved Processors

Printed: 12/14/2018

Proc #DDTC Exp Date

See Note 6PROCESSOR (as of December 14, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 AQS - QUALITY SYSTEM AC7004

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP01 - COATING, PAINT APPLICATION MIL-F-18264

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP12 - PASSIVATION AMS-2700

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP12 - PASSIVATION E.S. 6.19

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 CP15 - PRE-PENETRANT ETCH AC7108/15

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 SE - MANUAL PEENING AMS-2430

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 SE - SHOT PEEN AMS-2430

632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) 529-0506 SE - SHOT PEEN CPC-6400

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 AQS - QUALITY SYSTEM AS 9100

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP01 - COATING, DRY FILM MIL-PRF-46010

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP01 - COATING, DRY FILM MM-1920

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP01 - COATING, PAINT APPLICATION MIL-F-18264

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP01 - COATING, PAINT APPLICATION MM-5748

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP07 - IVD, ALUMINUM AMS-2427

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP07 - IVD, ALUMINUM MIL-DTL-83488

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP07 - IVD, CADMIUM AMS-C-8837

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP07 - IVD, CADMIUM CPC-8210

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP07 - IVD, CADMIUM MM-4949

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP11 - CONVERSION COATING, ALUMINUM MM-5516

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223

CP11 - CONVERSION COATING, ALUMINUM, NON-

HEX CHR MIL-DTL-5541 Type II

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP12 - PASSIVATION AMS-2700

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 CP15 - PRE-PENETRANT ETCH AC7108/15

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 HT - STRESS RELIEF AMS-2759/11

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley (310) 637-1066 x223 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 AQS - QUALITY SYSTEM AC7004

MPI per BAC5424, FPI per BAC5423 and Passivate per BAC5625

only.

947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 CP12 - PASSIVATION AMS-2700

947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 CP15 - PRE-PENETRANT ETCH AC7108/15

947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

16 Abrasive Finishing Co. (5490) 14920 S. Main St. Gardena CA USA Mike Demke (310) 323-7175 AQS - QUALITY SYSTEM AC7004

16 Abrasive Finishing Co. (5490) 14920 S. Main St. Gardena CA USA Mike Demke (310) 323-7175 SE - MANUAL PEENING AMS-2430

16 Abrasive Finishing Co. (5490) 14920 S. Main St. Gardena CA USA Mike Demke (310) 323-7175 SE - MANUAL PEENING LGPS-1501

16 Abrasive Finishing Co. (5490) 14920 S. Main St. Gardena CA USA Mike Demke (310) 323-7175 SE - SHOT PEEN AMS-2430

16 Abrasive Finishing Co. (5490) 14920 S. Main St. Gardena CA USA Mike Demke (310) 323-7175 SE - SHOT PEEN CP-0340

1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 AQS - QUALITY SYSTEM AS 9100

1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2759/3



1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2774

1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-5663

1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-H-7199

1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 WLD - BRAZING AMS-2675

1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 AQS - QUALITY SYSTEM AC7004

1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 HT - HEAT TREAT AMS-2759/1








1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 HT - HEAT TREAT AMS-2774




1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 HT - HEAT TREAT AMS-H-6875

1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 HT - HEAT TREAT AMS-H-81200

1631 1900-01-01 Accurate Steel Treating Inc (9860) 10008 Miller Way South Gate, CA USA Krishna Cherukuri 800-622-4328 HT - STRESS RELIEF AMS-2759/11

1471 1900-01-01 Active Magnetic Inspection (3099) Unit B9356 1/2 San Fernando Rd. Sun Valley CA USA David Herrera 818-504-0677 AQS - QUALITY SYSTEM AC7004

1471 1900-01-01 Active Magnetic Inspection (3099) Unit B9356 1/2 San Fernando Rd. Sun Valley CA USA David Herrera 818-504-0677 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1471 1900-01-01 Active Magnetic Inspection (3099) Unit B9356 1/2 San Fernando Rd. Sun Valley CA USA David Herrera 818-504-0677 CP12 - PASSIVATION AMS-2700

1471 1900-01-01 Active Magnetic Inspection (3099) Unit B9356 1/2 San Fernando Rd. Sun Valley CA USA David Herrera 818-504-0677 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1471 1900-01-01 Active Magnetic Inspection (3099) Unit B9356 1/2 San Fernando Rd. Sun Valley CA USA David Herrera 818-504-0677 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 AQS - QUALITY SYSTEM ISO 17025

1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on site

1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 AQS - QUALITY SYSTEM AS 9100

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP01 - COATING, PAINT APPLICATION BR-167

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP01 - COATING, PAINT APPLICATION LGPS-1001

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP01 - COATING, PAINT APPLICATION MIL-F-18264

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP01 - COATING, PAINT APPLICATION MM-5748

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP09 - PLATING, COPPER AMS-2418

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP12 - PASSIVATION AMS-2700 Type 2 and 6 solutions.

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 CP15 - PRE-PENETRANT ETCH AC7108/15

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 HT - STRESS RELIEF AMS-2759/11

Ovens certified to only 400°F maximum; no Boeing product

permitted.

Page (4) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) 643-4555 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 AQS - QUALITY SYSTEM AS 9100

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP01 - COATING, DRY FILM MIL-PRF-46010

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME AMS-2406

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME AMS-QQ-C-320

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME E.S. 6.131

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, THIN DENSE CHROME AMS-2438

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION AMS-2700

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION ASTM-A-967

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION E.S. 6.19

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2759/1




1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2774

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-H-6875

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT E.S. 13.3.79

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - STRESS RELIEF AMS-2759/11

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228) No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 AQS - QUALITY SYSTEM AS 9100

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 I, IB

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME AMS-2460

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME AMS-QQ-C-320

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME LGPS-1101

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP12 - PASSIVATION AMS-2700

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759/3

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759/5

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-H-6875

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

932 AECC Xi’an Engine Control Technology Co.Ltd. (7151) 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 AQS - QUALITY SYSTEM AC7004

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - INSPECTION, RADIOGRAPHIC MMC-142

30 Aerocom Inspection Service Ltd (3111) 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) 823-4933 NDT - PRE-PENETRANT ETCH AC7108/15

31 2019-02-28 Aerocraft Heat Treating Co., Inc. (3112) 15701 Minnesota Ave. Paramount CA USA Imtiyaz Ahmed (562) 674-2400 AQS - QUALITY SYSTEM AS 9100

31 2019-02-28 Aerocraft Heat Treating Co., Inc. (3112) 15701 Minnesota Ave. Paramount CA USA Imtiyaz Ahmed (562) 674-2400 HT - HEAT TREAT AMS-2759/1





31 2019-02-28 Aerocraft Heat Treating Co., Inc. (3112) 15701 Minnesota Ave. Paramount CA USA Imtiyaz Ahmed (562) 674-2400 HT - HEAT TREAT AMS-2774

31 2019-02-28 Aerocraft Heat Treating Co., Inc. (3112) 15701 Minnesota Ave. Paramount CA USA Imtiyaz Ahmed (562) 674-2400 HT - HEAT TREAT AMS-H-6875

31 2019-02-28 Aerocraft Heat Treating Co., Inc. (3112) 15701 Minnesota Ave. Paramount CA USA Imtiyaz Ahmed (562) 674-2400 HT - HEAT TREAT AMS-H-81200

Page (5) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 AQS - QUALITY SYSTEM EN9100

1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 HT - HEAT TREAT AMS-2759/1





1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 HT - HEAT TREAT AMS-2774

1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 HT - HEAT TREAT AMS-5629

1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 HT - HEAT TREAT AMS-H-6875

1625 Aeroprocess TTT SA de CV (12744) Av del Marques 70 P. Ind. Bernardo, Quintana Queretaro Mexico Itziar Larrañaga +52-442-483-3977 HT - STRESS RELIEF AMS-2759/11

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 AQS - QUALITY SYSTEM AS 9100

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP01 - COATING, PAINT APPLICATION LGPS-1001

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP01 - COATING, PAINT APPLICATION MIL-F-18264

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206

CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric

Acid LGPS-1109

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, ZINC NICKEL AMS-2417

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, ZINC NICKEL LGPS-1106

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP12 - PASSIVATION AMS-2700

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP12 - PASSIVATION ASTM-A-967

40 Aerospace Metal Finishing (4994) 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 HT - HEAT TREAT AMS-2759/11 APPROVED FOR STRESS RELIEF ONLY.

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 AQS - QUALITY SYSTEM AS 9100 Special processes as approved by Boeing via BAC D1-4426.

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP01 - COATING, DRY FILM MIL-PRF-46010 Type1 or 2

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP01 - COATING, PAINT APPLICATION LGPS-1001

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP01 - COATING, PAINT APPLICATION MIL-PRF-23377

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP01 - COATING, PAINT APPLICATION MIL-PRF-85285

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Type 1 and 1B

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Type 2

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Type I or II

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 CP12 - PASSIVATION AMS-2700 Type 2,5,6,and 8

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

42 Aerospace Processing India Pvt. Ltd. (API) (9772) Quest Sez Plot 6 437/a Hatteragi village Belgaum Karnataka India Nandan Kumar Thogur 91 974-201-9606 SE - SHOT PEEN AMS-2430

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 AQS - QUALITY SYSTEM AC7004

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) 882-1575 NDT - INSPECTION, ULTRASONIC CPC-9104

44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green (310) 473-8684 AQS - QUALITY SYSTEM AC7004

44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green (310) 473-8684 WLD - WELDING AWS-D17.2

44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green (310) 473-8684 WLD - WELDING ISO 15614-13

44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green (310) 473-8684 WLD - WELDING MIL-W-6873 Part number 2042-73 only.

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 AQS - QUALITY SYSTEM AS 9100

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 For MRO work only

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP15 - PRE-PENETRANT ETCH AC7108/15

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 WLD - WELDING AWS-D17.1

1063 2016-08-26 Aerosphere Inc. (8507) 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 AQS - QUALITY SYSTEM AS 9100

1063 2016-08-26 Aerosphere Inc. (8507) 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 SE - MANUAL PEENING AMS-2430

1063 2016-08-26 Aerosphere Inc. (8507) 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 SE - MANUAL PEENING LGPS-1501

1063 2016-08-26 Aerosphere Inc. (8507) 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 SE - SHOT PEEN AMS-2430

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 AQS - QUALITY SYSTEM AS 9100

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP01 - COATING, DRY FILM MIL-PRF-46010

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP01 - COATING, PAINT APPLICATION MIL-F-18264

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP07 - IVD, ALUMINUM AMS-2427

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP07 - IVD, ALUMINUM MIL-DTL-83488

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, COPPER AMS-2418

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, SILVER ASTM-B-700

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP09 - PLATING, TIN ASTM-B-545

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Also capable of Type II (non-hexavalent) chromate conversion.

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304

CP11 - CONVERSION COATING, STEEL, PHOSPHATE

MANG/ZN MIL-DTL-16232

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP12 - PASSIVATION AMS-2700

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 CP12 - PASSIVATION ASTM-A-967

48 AeroTek Manufacturing Limited - CAD (4434) 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) 666-3400 ext 304 HT - STRESS RELIEF AMS-H-6875

1143 AGC AeroComposites - Hayden (6886) 10413 N. Aero Drive Hayden ID USA Ron Curry 800-775-0861 AQS - QUALITY SYSTEM AS 9100

Approval supports manufacture and processing of 65B70327 to

Boeing specifications.

686 2017-07-31 AIM Aerospace Sumner Inc. (6183) 1516 Fryar Ave. Sumner WA USA Ken Fagan 253-863-7868 AQS - QUALITY SYSTEM AS 9100 Flame Spray Aluminum Coating per BAC 5056 only.

686 2017-07-31 AIM Aerospace Sumner Inc. (6183) 1516 Fryar Ave. Sumner WA USA Ken Fagan 253-863-7868 COMP - COMPOSITES N/A

As per contractual and engineering drawing requirements,

including BAC5317.

52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 AQS - QUALITY SYSTEM AS 9100

52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

Limited to the use of the Alodine 1132 felt tipped marker type

materials to local areas only. No Boeing D1-4426 approval.

52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP13 - PLATING, BRUSH CADMIUM LGPS-1102 No Boeing D1-4426 approval.

52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 No Boeing D1-4426 approval.

52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 NA - ROLLER BURNISHING BR-163 Approved for holes from 0.2576" to 2.963".

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 AQS - QUALITY SYSTEM AC7004

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP01 - COATING, DRY FILM MIL-L-46010

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP01 - COATING, PAINT APPLICATION MIL-F-18264

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP11 - CONVERSION COATING, ALUMINUM MM-5516

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP12 - PASSIVATION AMS-2700

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 CP15 - PRE-PENETRANT ETCH AC7108/15

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 Pacific Blvd. Huntington Park CA USA Juan M. Perez (323) 587-4141 x112 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

Page (6) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 AQS - QUALITY SYSTEM AC7004

1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-2759/1




1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-5659

1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-H-6875

1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - STRESS RELIEF AMS-2759/11

1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 AQS - QUALITY SYSTEM ISO 17025

1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) 336-0211 AQS - QUALITY SYSTEM AC7004

64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) 336-0211 HT - HEAT TREAT AMS-2770



64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) 336-0211 HT - HEAT TREAT E.S. 13.3.64

64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) 336-0211 HT - HEAT TREAT E.S. 5.14.29

64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) 336-0211 HT - HEAT TREAT MIL-H-6088

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 AQS - QUALITY SYSTEM AS 9100

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP01 - COATING, DRY FILM AS-5272

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP01 - COATING, DRY FILM MIL-PRF-46010

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP01 - COATING, PAINT APPLICATION MIL-F-18264

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP02 - TEMPER ETCH INSPECTION LGPS-3000

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP02 - TEMPER ETCH INSPECTION MM-5512

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP12 - PASSIVATION AMS-2700

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP12 - PASSIVATION ASTM-A-967

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 CP15 - PRE-PENETRANT ETCH AC7108/15

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 HT - STRESS RELIEF AMS-2759/11

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

67 2018-10-31 All Metals Processing of Orange County, LLC (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) 828-8238 x127 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 AQS - QUALITY SYSTEM AS 9100

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP01 - COATING, DRY FILM AS-5528

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP01 - COATING, DRY FILM MIL-PRF-46010

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP01 - COATING, DRY FILM MM-1920

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP01 - COATING, PAINT APPLICATION LGPS-1001

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP01 - COATING, PAINT APPLICATION MIL-F-18264

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) CP-0640

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.88

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443


MANG/ZN AMS-2481

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443



70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP12 - PASSIVATION AMS-2700

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP12 - PASSIVATION ASTM-A-967

70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) 296-1531 x3443 CP12 - PASSIVATION E.S. 6.19

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 AQS - QUALITY SYSTEM AS 9100

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, CHROME LGPS-7000

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, CHROME MIL-STD-866

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, HVOF LGPS-7010

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP01 - COATING, PAINT APPLICATION LGPS-1001

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP01 - COATING, PAINT APPLICATION MIL-F-18264

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION AMS-2649

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION LGPS-3000

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Chromic acid anodize TYPE IB, CLASS 1 (Low Voltage Process)

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CHROME LGPS-1101

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CHROME MIL-STD-1501

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP12 - PASSIVATION AMS-2700 Solution type VI, VIII

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP12 - TITANIUM CLEANING LGPS-8003

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP14 - STRIPPING, HVOF LGPS-1300

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CT - HVOF LGPS-1301

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/1

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/2

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/3 Except solution HT

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2770

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT LGPS-2000

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - STRESS RELIEF AMS-2759/11

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - PRE-PENETRANT ETCH AC7108/15

74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE No 29/1-2 Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 SE - SHOT PEEN AMS-2430

Limited to one shot peening machine only No WSP7XM02 type

WHEELABRATOR MPR1500

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 AQS - QUALITY SYSTEM AS 9100

Page (7) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 HT - HEAT TREAT AMS-2759

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 HT - HEAT TREAT AMS-2771

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 WLD - WELDING AMS-2694

76 Alphacasting Inc. (5168) 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 WLD - WELDING AWS-D17.1

1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 AQS - QUALITY SYSTEM AC7004

1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

79 2018-03-31 Aluminum Precision Products - Oxnard (4780) 1001 McWane Blvd. Oxnard CA USA Bennett Straker

(805) 488-4401 EXT. 5247, 5264,

5223 AQS - QUALITY SYSTEM AS 9100


(805) 488-4401 EXT. 5247, 5264,

5223 HT - HEAT TREAT AMS-2772


(805) 488-4401 EXT. 5247, 5264,

5223 HT - HEAT TREAT AMS-H-6088

1606 2017-03-31 Aluminum Precision Products - Santa Ana - Susan (7728) 2621 S Susan St. Santa Ana CA USA

Dennis McNiff; Laila Hussain; Yesenia

Romero (714) 546-8125 AQS - QUALITY SYSTEM AS 9100



Romero (714) 546-8125 HT - HEAT TREAT AMS-2772



Romero (714) 546-8125 HT - HEAT TREAT AMS-H-6088



Romero (714) 546-8125 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417



Romero (714) 546-8125 NDT - PRE-PENETRANT ETCH AC7108/15

80 2017-03-31 Aluminum Precision Products - Santa Ana - Warner (4666) 3333 W. Warner Ave. Santa Ana CA USA


Romero (714) 546-8125 AQS - QUALITY SYSTEM AS 9100



Romero (714) 546-8125 HT - HEAT TREAT AMS-2772



Romero (714) 546-8125 HT - HEAT TREAT AMS-H-6088



Romero (714) 546-8125 HT - HEAT TREAT MIL-H-6088



Romero (714) 546-8125 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417



Romero (714) 546-8125 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

81 Alumiplate Inc. 8960 Springbrook Dr., Suite 105 Coon Rapids MN USA Jon Schulz (763) 786-3788 AQS - QUALITY SYSTEM AQS No third-party registration of quality system.

81 Alumiplate Inc. 8960 Springbrook Dr., Suite 105 Coon Rapids MN USA Jon Schulz (763) 786-3788 CP09 - PLATING, ALUMINUM (Alumiplate®) MIL-DTL-83488 PN's 274-231 and 274-233 only.

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 AQS - QUALITY SYSTEM AS 9100

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CMSP - GRINDING, CHROME LGPS-7000

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CMSP - GRINDING, CHROME MIL-STD-866

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CMSP - GRINDING, HVOF LGPS-7010

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CP02 - TEMPER ETCH INSPECTION BP-108

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CP02 - TEMPER ETCH INSPECTION CP-0350

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CP02 - TEMPER ETCH INSPECTION LGPS-3000

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 HT - STRESS RELIEF AMS-2759/11 650 degrees F maximum

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 HT - STRESS RELIEF AMS-2759/9 650 degrees F maximum

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 HT - STRESS RELIEF AMS-H-6875 650 degrees F maximum

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 HT - STRESS RELIEF CPC-6203 650 degrees F maximum

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis (586) 294-3300 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg OH USA Diedra Howell 937-298-9390 AQS - QUALITY SYSTEM AS 9100

1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg OH USA Diedra Howell 937-298-9390 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg OH USA Diedra Howell 937-298-9390 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg OH USA Diedra Howell 937-298-9390 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg OH USA Diedra Howell 937-298-9390 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 AQS - QUALITY SYSTEM AC7004

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 AQS - QUALITY SYSTEM AS 9100

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Type 3

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Type 3

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Type 2

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Type 2

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP09 - PLATING, ZINC NICKEL AMS-2417

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.193

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421



1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP12 - PASSIVATION AMS-2700 Type 2,5,6,8

1618 Amitronics Pvt. Ltd. (9222) 26B Electronic City Bangalore Karnataka India Sujith Pais 91-80-28520421 CP12 - PASSIVATION E.S. 6.19 Type 2,5,6,8

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 AQS - QUALITY SYSTEM AC7004

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP09 - PLATING, NICKEL AMS-2403

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP09 - PLATING, NICKEL AMS-QQ-N-290

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565



1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP12 - PASSIVATION AMS-2700

1407 2018-04-30 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP12 - PASSIVATION ASTM-A-967

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT AQS - QUALITY SYSTEM AS 9100

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT CP09 - PLATING, SILVER AMS-2411

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT CP12 - PASSIVATION AMS-2700

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT HT - HEAT TREAT AMS-2759/1




1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT HT - HEAT TREAT AMS-2770

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT HT - HEAT TREAT AMS-2801

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1311 Ankit Fasteners Pvt Ltd (9122) NO 297 HARAGADDE VILLAGE Bangalore Karnataka India Joseph KT NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 AQS - QUALITY SYSTEM AC7004

Page (8) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson (203) 268-9966 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 AQS - QUALITY SYSTEM AS 9100

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP01 - COATING, DRY FILM MIL-PRF-46010

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP01 - COATING, PAINT APPLICATION LGPS-1001

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP01 - COATING, PAINT APPLICATION MIL-F-18264

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP12 - PASSIVATION AMS-2700

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP12 - PASSIVATION ASTM-A-967

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 CP15 - PRE-PENETRANT ETCH AC7108/15

90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire Quebec Canada Alexei Fedortchenko (514) 429-7777 x36 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 AQS - QUALITY SYSTEM AC7004

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP01 - COATING, DRY FILM MIL-PRF-46010

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) E.S. 6.16

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, CHROME AMS-2460

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, CHROME AMS-QQ-C-320

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, NICKEL AMS-QQ-N-290

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, ZINC NICKEL AMS-2417

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924

1408 2018-09-30 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP12 - PASSIVATION AMS-2700

1456 Applied Process, Inc. (8078) 12202 Newburgh Rd. Livonia MI USA Chris Pietszak (734) 464-8000 AQS - QUALITY SYSTEM AC7004

1456 Applied Process, Inc. (8078) 12202 Newburgh Rd. Livonia MI USA Chris Pietszak (734) 464-8000 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

98 Applus RTD Canada - Burlington (4740) 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 AQS - QUALITY SYSTEM AS 9100

98 Applus RTD Canada - Burlington (4740) 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

98 Applus RTD Canada - Burlington (4740) 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

99 Applus RTD Canada - Schomberg (5190) 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 AQS - QUALITY SYSTEM AS 9100

99 Applus RTD Canada - Schomberg (5190) 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

99 Applus RTD Canada - Schomberg (5190) 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave Cleveland OH USA Heather Watson

office (216) 641-4506; mobile 216-

905-5667 AQS - QUALITY SYSTEM AS 9100


office (216) 641-4506; mobile 216-

905-5667 HT - HEAT TREAT AMS-2770


office (216) 641-4506; mobile 216-

905-5667 HT - HEAT TREAT AMS-2772


office (216) 641-4506; mobile 216-

905-5667 HT - HEAT TREAT E.S. 5.14.26


office (216) 641-4506; mobile 216-

905-5667 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417


office (216) 641-4506; mobile 216-

905-5667 NDT - INSPECTION, ULTRASONIC AMS-STD-2154


office (216) 641-4506; mobile 216-

905-5667 NDT - INSPECTION, ULTRASONIC CPC-9104


office (216) 641-4506; mobile 216-

905-5667 NDT - PRE-PENETRANT ETCH AC7108/15

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 AQS - QUALITY SYSTEM AS 9100

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 CP12 - PASSIVATION AMS-2700

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 CP12 - TITANIUM CLEANING ASTM-B-600 At Fullerton facility only.

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-2759/3

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-2769



1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-H-81200

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - STRESS RELIEF AMS-2759/11

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William D+uarte (626) 333-3898 ext. 205 AQS - QUALITY SYSTEM AS 9100

2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William D+uarte (626) 333-3898 ext. 205 HT - HEAT TREAT AMS-2759/1







2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William D+uarte (626) 333-3898 ext. 205 HT - HEAT TREAT AMS-2770

2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William D+uarte (626) 333-3898 ext. 205 HT - HEAT TREAT AMS-H-6088



2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William D+uarte (626) 333-3898 ext. 205 HT - STRESS RELIEF AMS-2759/11

1629 Art Brass Aerospace Finishing (11279) 5516 3rd Avenue South Seattle WA USA Steve Mulder 206-209-3010 AQS - QUALITY SYSTEM AC7004

1629 Art Brass Aerospace Finishing (11279) 5516 3rd Avenue South Seattle WA USA Steve Mulder 206-209-3010 CP12 - PASSIVATION AMS-2700

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 AQS - QUALITY SYSTEM JISQ9100

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CMSP - GRINDING, CHROME MIL-STD-866

Approval limited to chrome grinding on stainless steel substrate

only.

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME AMS-2460

Page (9) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME AMS-QQ-C-320

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME MIL-STD-1501

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP12 - PASSIVATION AMS-2700

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP12 - PASSIVATION ASTM-A-967

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP15 - PRE-PENETRANT ETCH AC7108/15

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 SE - SHOT PEEN AMS-2430

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 AQS - QUALITY SYSTEM JISQ9100

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME AMS-2460

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME AMS-QQ-C-320

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME MIL-STD-1501

7 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 AQS - QUALITY SYSTEM AS 9100

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CMSP - GRINDING, CHROME LGPS-7000

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CMSP - GRINDING, CHROME MIL-STD-866

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP01 - COATING, PAINT APPLICATION LGPS-1001

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP02 - TEMPER ETCH INSPECTION LGPS-3000

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP09 - PLATING, CHROME AMS-2460

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 CP12 - PASSIVATION AMS-2700

1110 Asashita Mekki Co., Ltd. (10370) 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura +81-76-276-3115 HT - STRESS RELIEF AMS-2759/11 100-500 degrees C or 212-932 degrees F

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 AQS - QUALITY SYSTEM AS 9100

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP01 - COATING, PAINT APPLICATION LGPS-1001

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP01 - COATING, PAINT APPLICATION MIL-F-18264

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP02 - TEMPER ETCH INSPECTION LGPS-3000

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP12 - TITANIUM CLEANING LGPS-8003

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP15 - PRE-PENETRANT ETCH AC7108/15

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-2759

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-2759/11

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-H-6875

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 SE - FLAPPER / ROTO PEENING AMS-2590

103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 SE - SHOT PEEN AMS-2430

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 AQS - QUALITY SYSTEM AC7004

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, CHROME LGPS-7000

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, CHROME MIL-STD-866

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, HVOF AMS-2449

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, HVOF LGPS-7010

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF AMS-2447

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF AMS-2448

104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-018)

105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 AQS - QUALITY SYSTEM AC7004

105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, DRY FILM MIL-PRF-46010

105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION BR-167

105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION LGPS-1001

105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION MIL-F-18264

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 AQS - QUALITY SYSTEM AC7004

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP02 - TEMPER ETCH INSPECTION AMS-2649

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP02 - TEMPER ETCH INSPECTION LGPS-3000

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CHROME AMS-2438

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CHROME AMS-2460

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CHROME AMS-QQ-C-320

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CHROME LGPS-1101

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, CHROME MIL-STD-1501

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, COPPER AMS-2418

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, NICKEL AMS-2424

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, NICKEL AMS-QQ-N-290

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, SILVER ASTM-B-700

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, TIN ASTM-B-545

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP09 - PLATING, TIN MIL-T-10727 Type 1 only.

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP11 - CONVERSION COATING, ALUMINUM MM-5516

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080



106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080


MANG/ZN AMS-2481

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP12 - PASSIVATION AMS-2700

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP12 - PASSIVATION ASTM-A-967

Page (10) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP14 - STRIPPING, HVOF LGPS-1300

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 CP15 - PRE-PENETRANT ETCH AC7108/15

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 HT - STRESS RELIEF AMS-2759/11 Stress relief up to 950°F

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 SE - MANUAL PEENING AMS-2430

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 SE - SHOT PEEN AMS-2430

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 SE - SHOT PEEN BP-105

106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks (206) 634-2080 SE - SHOT PEEN CPC-6400

107 2018-11-30 Astro Aluminum Treating Co. (3051) 11040 PALMER AVENUE SOUTH GATE CA USA Jeff Neer (562) 923-4344 AQS - QUALITY SYSTEM AC7004

107 2018-11-30 Astro Aluminum Treating Co. (3051) 11040 PALMER AVENUE SOUTH GATE CA USA Jeff Neer (562) 923-4344 HT - HEAT TREAT AMS-2770

107 2018-11-30 Astro Aluminum Treating Co. (3051) 11040 PALMER AVENUE SOUTH GATE CA USA Jeff Neer (562) 923-4344 HT - HEAT TREAT AMS-2772

107 2018-11-30 Astro Aluminum Treating Co. (3051) 11040 PALMER AVENUE SOUTH GATE CA USA Jeff Neer (562) 923-4344 HT - HEAT TREAT AMS-H-6088

1458 Astro Manufacturing & Design (10406) 34459 Curtis Blvd. Eastlake OH USA William Roberts 440-946-8171 ext 1602 AQS - QUALITY SYSTEM AC7004

1458 Astro Manufacturing & Design (10406) 34459 Curtis Blvd. Eastlake OH USA William Roberts 440-946-8171 ext 1602 CP01 - COATING, PAINT APPLICATION MIL-F-18264

504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff

LG (414) 747-3337 AWB (414) 747-

2611 AQS - QUALITY SYSTEM AS 9100


LG (414) 747-3337 AWB (414) 747-



LG (414) 747-3337 AWB (414) 747-

2611 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417


LG (414) 747-3337 AWB (414) 747-

2611 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444


LG (414) 747-3337 AWB (414) 747-

2611 NDT - PRE-PENETRANT ETCH AC7108/15

939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 AQS - QUALITY SYSTEM AS 9100

939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 HT - HEAT TREAT AMS-2759/2

939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 HT - HEAT TREAT AMS-H-6875

939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 AQS - QUALITY SYSTEM AS 9100

152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 HT - HEAT TREAT AMS-H-6875

152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 AQS - QUALITY SYSTEM AC7004

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP01 - COATING, DRY FILM MIL-PRF-46010

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP01 - COATING, PAINT APPLICATION MIL-F-18264

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP09 - PLATING, COPPER AMS-2418

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP09 - PLATING, NICKEL AMS-2403

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP09 - PLATING, SILVER ASTM-B-700

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222



170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP12 - PASSIVATION AMS-2700

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP12 - PASSIVATION ASTM-A-967

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 CP15 - PRE-PENETRANT ETCH AC7108/15

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 HT - STRESS RELIEF AMS-2759/11 1000'F maximum.

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis (310) 478-0078 X 222 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 AQS - QUALITY SYSTEM AC7004

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP01 - COATING, DRY FILM MIL-PRF-46010

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Excluding 2024 aluminum

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Excluding 2024 aluminum

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP12 - PASSIVATION AMS-2700

1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP12 - PASSIVATION E.S. 6.19

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 AQS - QUALITY SYSTEM AC7004

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT AMS-2759/1







174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT AMS-2770

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT AMS-2772

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT AMS-H-6875

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT AMS-H-81200

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT BP-106




174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT CP-0710

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT MM-5744

174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia (973) 589-0590 HT - HEAT TREAT MMC-125







176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 AQS - QUALITY SYSTEM AC7004

176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 CP12 - PASSIVATION AMS-2700

176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 CP12 - PASSIVATION ASTM-A-967

176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 CP15 - PRE-PENETRANT ETCH AC7108/15

176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene (818) 768-8655 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto AQS - QUALITY SYSTEM AC7004

Page (11) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DLT-13924

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-F-495

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP12 - PASSIVATION AMS-2700

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP12 - PASSIVATION ASTM-A-967

1473 Black Oxide Industries Inc (4326) 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto HT - STRESS RELIEF AMS-2759/11

439 2018-09-30 Blair / HSM Machine Works, Inc. (12230) 3671 Horseblock Road Medford NY USA John Andrucci;Rex Batita (631) 924-6600 AQS - QUALITY SYSTEM AS 9100

439 2018-09-30 Blair / HSM Machine Works, Inc. (12230) 3671 Horseblock Road Medford NY USA John Andrucci;Rex Batita (631) 924-6600 CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved for HSM production parts only.

439 2018-09-30 Blair / HSM Machine Works, Inc. (12230) 3671 Horseblock Road Medford NY USA John Andrucci;Rex Batita (631) 924-6600 CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved for HSM production parts only.

439 2018-09-30 Blair / HSM Machine Works, Inc. (12230) 3671 Horseblock Road Medford NY USA John Andrucci;Rex Batita (631) 924-6600 CP01 - COATING, PAINT APPLICATION MM-5748 Approved for HSM production parts only.

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 AQS - QUALITY SYSTEM AS 9100

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP01 - COATING, DRY FILM MIL-PRF-46010

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP09 - PLATING, CHROME AMS-2460

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP09 - PLATING, NICKEL AMS-QQ-N-290

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590



1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP12 - PASSIVATION AMS-2700

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 CP15 - PRE-PENETRANT ETCH AC7108/15

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 HT - HEAT TREAT AMS-2759/1







1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 HT - HEAT TREAT AMS-H-6088

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 HT - STRESS RELIEF AMS-2759/11

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1102 2018-03-31 Blanchard Metals Processing Co. (4569) 1115 S. Pioneer Rd. Salt Lake City UT USA Rich Madsen 801-972-5590 SE - SHOT PEEN AMS-2430

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 AQS - QUALITY SYSTEM AS 9100

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 CP01 - COATING, PAINT APPLICATION MIL-F-18264

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 CP15 - PRE-PENETRANT ETCH AC7108/15

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

179 2017-08-31 Blue Streak Finishers (4405) 1520 80th Street, S.W. Everett WA USA Stephen Mulder (425) 347-1944 SE - SHOT PEEN AMS-2430

407 Bluewater Thermal Solutions (8118) 802 South Fellows South Bend IN USA Gary Linley (574) 232-3338 AQS - QUALITY SYSTEM AS 9100

407 Bluewater Thermal Solutions (8118) 802 South Fellows South Bend IN USA Gary Linley (574) 232-3338 HT - HEAT TREAT AMS-2759/1



407 Bluewater Thermal Solutions (8118) 802 South Fellows South Bend IN USA Gary Linley (574) 232-3338 HT - STRESS RELIEF AMS-2759/11 Up to 1200'F

180 BODYCOTE BELGIUM (5610) Mercator Science Park Sint Lendriksborre 11 Bruxelles BELGIUM Emilie Crozier 32-2-268-0020 AQS - QUALITY SYSTEM AS 9100

180 BODYCOTE BELGIUM (5610) Mercator Science Park Sint Lendriksborre 11 Bruxelles BELGIUM Emilie Crozier 32-2-268-0020 HT - HEAT TREAT AMS-2759

180 BODYCOTE BELGIUM (5610) Mercator Science Park Sint Lendriksborre 11 Bruxelles BELGIUM Emilie Crozier 32-2-268-0020 HT - HEAT TREAT AMS-2759/1

180 BODYCOTE BELGIUM (5610) Mercator Science Park Sint Lendriksborre 11 Bruxelles BELGIUM Emilie Crozier 32-2-268-0020 HT - HEAT TREAT AMS-2759/2

190 Bodycote Heat Treatments Ltd - MacClesfield England (4606) QUEENS AVENUE MACCLESFIELD CHESHIRE UK Gareth Flentje (44) 16525 501888 AQS - QUALITY SYSTEM AS 9100

190 Bodycote Heat Treatments Ltd - MacClesfield England (4606) QUEENS AVENUE MACCLESFIELD CHESHIRE UK Gareth Flentje (44) 16525 501888 HT - HEAT TREAT AMS-2759/1

190 Bodycote Heat Treatments Ltd - MacClesfield England (4606) QUEENS AVENUE MACCLESFIELD CHESHIRE UK Gareth Flentje (44) 16525 501888 HT - HEAT TREAT MM-4990

1346 Bodycote Hot Isostatic Pressing (10589) 155 River Street Andover MA USA William Hewson 978-470-1620 ext 426 AQS - QUALITY SYSTEM AS 9100

1346 Bodycote Hot Isostatic Pressing (10589) 155 River Street Andover MA USA William Hewson 978-470-1620 ext 426 HT - HOT ISOSTATIC PRESSURE ASTM-A-1080

1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 AQS - QUALITY SYSTEM AS 9100

1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 HT - HEAT TREAT AMS-4991

1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 HT - HEAT TREAT AMS-H-81200

1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 HT - HEAT TREAT E.S. 13.101




1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 HT - HOT ISOSTATIC PRESSURE AMS-4991

1563 2018-04-30 Bodycote IMT, Inc. (3079) 4605 NW Pacific Rim Blvd. Camas WA USA Kelly Kegg 360-833-1120 HT - HOT ISOSTATIC PRESSURE E.S. 13.101




185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 AQS - QUALITY SYSTEM AS 9100

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT AMS-2759/1





185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT AMS-H-6875

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT AMS-H-7199

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT BP-106

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT BP-124

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT LGPS-2002

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT MM-4990

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT MM-4995

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - HEAT TREAT PS-2101

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - STRESS RELIEF AMS-2759/11

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - STRESS RELIEF PS-1001 Stress relief only

185 2017-04-30 Bodycote Thermal Processing - (FTW) Haltom City (3519) 4008 Clay Ave Haltom City TX USA Tony Marsh (817) 737-6651 HT - STRESS RELIEF PS-1002 Stress relief only

183 Bodycote Thermal Processing - Berlin CT (3081) 675 Christian Lane Berlin CT USA Benjamin Abraham (860) 225-7691 AQS - QUALITY SYSTEM AS 9100

183 Bodycote Thermal Processing - Berlin CT (3081) 675 Christian Lane Berlin CT USA Benjamin Abraham (860) 225-7691 HT - HEAT TREAT AMS-H-6875

184 Bodycote Thermal Processing - Cincy (3518) 710 Burns Street Cincinnati OH USA Roger Dunn (513) 921-2300 AQS - QUALITY SYSTEM AS 9100

184 Bodycote Thermal Processing - Cincy (3518) 710 Burns Street Cincinnati OH USA Roger Dunn (513) 921-2300 HT - HEAT TREAT AMS-2759/1




184 Bodycote Thermal Processing - Cincy (3518) 710 Burns Street Cincinnati OH USA Roger Dunn (513) 921-2300 HT - HEAT TREAT AMS-H-6875

184 Bodycote Thermal Processing - Cincy (3518) 710 Burns Street Cincinnati OH USA Roger Dunn (513) 921-2300 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

184 Bodycote Thermal Processing - Cincy (3518) 710 Burns Street Cincinnati OH USA Roger Dunn (513) 921-2300 HT - STRESS RELIEF AMS-2759/11

1410 Bodycote Thermal Processing - Elkhart (8654) 55226 CR1 North Elkhart IN USA Dustin Thomas 574-970-7482 AQS - QUALITY SYSTEM AC7004

1410 Bodycote Thermal Processing - Elkhart (8654) 55226 CR1 North Elkhart IN USA Dustin Thomas 574-970-7482 HT - HEAT TREAT AMS-2759/1

Page (12) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date






1410 Bodycote Thermal Processing - Elkhart (8654) 55226 CR1 North Elkhart IN USA Dustin Thomas 574-970-7482 HT - HEAT TREAT AMS-H-6875

1410 Bodycote Thermal Processing - Elkhart (8654) 55226 CR1 North Elkhart IN USA Dustin Thomas 574-970-7482 HT - HEAT TREAT E.S. 5.14.30

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 AQS - QUALITY SYSTEM AS 9100

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 CP09 - PLATING, COPPER AMS-2418

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT AMS-2759/1




187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT AMS-2759/6 UTAS LG approved part-specific technique is required.


187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT AMS-H-6875

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT BP-106

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT CP-0360

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT CP-0390

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT CPC-6215

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT LGPS-2002

187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - HEAT TREAT MM-4990



187 2016-04-30 Bodycote Thermal Processing - Huntington Park (3307) 3370 Benedict Way Huntington Park CA USA Moses Casillas (323) 583-1231 HT - STRESS RELIEF AMS-2759/11

1486 Bodycote Thermal Processing - Ipswich (3520) 11 C Old Right Rd Ipswich MA USA Alex Muenzner 978-356-3818 ext 127 AQS - QUALITY SYSTEM AS 9100

1486 Bodycote Thermal Processing - Ipswich (3520) 11 C Old Right Rd Ipswich MA USA Alex Muenzner 978-356-3818 ext 127 HT - HEAT TREAT AMS-2759/3



1486 Bodycote Thermal Processing - Ipswich (3520) 11 C Old Right Rd Ipswich MA USA Alex Muenzner 978-356-3818 ext 127 HT - HEAT TREAT AMS-2774

1409 Bodycote Thermal Processing - Laconia (3521) 187 Water St. Laconia NH USA Walter Zanes 603-524-7886 AQS - QUALITY SYSTEM AS 9100

1409 Bodycote Thermal Processing - Laconia (3521) 187 Water St. Laconia NH USA Walter Zanes 603-524-7886 HT - HEAT TREAT AMS-2759/1





199 Bodycote Thermal Processing - Melrose Park 1975 North Ruby Street Melrose Park IL USA William Iancau (708) 344-4080 x379 AQS - QUALITY SYSTEM ISO9000

199 Bodycote Thermal Processing - Melrose Park 1975 North Ruby Street Melrose Park IL USA William Iancau (708) 344-4080 x379 HT - STRESS RELIEF AMS-2759/11

Limited to stress relief of 747-8 WLG drag brace weldment PN

161U2618.

1595 Bodycote Thermal Processing - Rancho Domi (3526) 515 W Apra Street Rancho Dominguez CA USA Satee Zargar 310-604-8000 x107 AQS - QUALITY SYSTEM AS 9100

1595 Bodycote Thermal Processing - Rancho Domi (3526) 515 W Apra Street Rancho Dominguez CA USA Satee Zargar 310-604-8000 x107 HT - STRESS RELIEF AMS-2759/11 Stress relieve welded parts from Interface Welding only.

193 2018-04-30 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527) 9921 Romandel Ave. Santa Fe Springs CA USA Joel Catap (562) 946-1717 AQS - QUALITY SYSTEM AS 9100

193 2018-04-30 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527) 9921 Romandel Ave. Santa Fe Springs CA USA Joel Catap (562) 946-1717 HT - HEAT TREAT AMS-2759/1





193 2018-04-30 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527) 9921 Romandel Ave. Santa Fe Springs CA USA Joel Catap (562) 946-1717 HT - HEAT TREAT AMS-2772

193 2018-04-30 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527) 9921 Romandel Ave. Santa Fe Springs CA USA Joel Catap (562) 946-1717 HT - HEAT TREAT AMS-H-6875

193 2018-04-30 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527) 9921 Romandel Ave. Santa Fe Springs CA USA Joel Catap (562) 946-1717 HT - HEAT TREAT AMS-H-81200

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 AQS - QUALITY SYSTEM AS 9100

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT AMS-2759/1




196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT AMS-2801

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT AMS-H-6875

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT AMS-H-81200

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT BP-106

196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT CP-0360



196 2018-04-30 Bodycote Thermal Processing - Vernon (3308) 2900 S. Sunol Dr. Los Angeles CA USA Dmytro Zagrebelnyy (323) 264-0111 HT - HEAT TREAT MM-4990




197 2018-04-30 Bodycote Thermal Processing - Westminster (3516) 7474 Garden Grove Blvd. Westminster CA USA Marcia Bell 714-893-6561 AQS - QUALITY SYSTEM AS 9100

197 2018-04-30 Bodycote Thermal Processing - Westminster (3516) 7474 Garden Grove Blvd. Westminster CA USA Marcia Bell 714-893-6561 HT - HEAT TREAT AMS-2770



198 Bodycote Thermal Processing - Worchester (6018) 284 GROVE STREET WORCESTER MA USA Juan Rosario (508) 754-1724 AQS - QUALITY SYSTEM AS 9100

198 Bodycote Thermal Processing - Worchester (6018) 284 GROVE STREET WORCESTER MA USA Juan Rosario (508) 754-1724 HT - HEAT TREAT E.S. 5.14.2

198 Bodycote Thermal Processing - Worchester (6018) 284 GROVE STREET WORCESTER MA USA Juan Rosario (508) 754-1724 HT - HEAT TREAT E.S. 5.14.31

1626 BODYCOTE Western & Southern Europe (6820) ZI Route de Crouy Neuilly-En-Thelle France Claire Savage 0033 344268600 AQS - QUALITY SYSTEM AS 9100

1626 BODYCOTE Western & Southern Europe (6820) ZI Route de Crouy Neuilly-En-Thelle France Claire Savage 0033 344268600 HT - HEAT TREAT AMS-H-81200

1626 BODYCOTE Western & Southern Europe (6820) ZI Route de Crouy Neuilly-En-Thelle France Claire Savage 0033 344268600 HT - HEAT TREAT E.S.-13.104

1482 BODYCOTE Western Europe (5241) ZI rue de Tumulus Serres Castet France Mario Ammon + 33 559-331-437 AQS - QUALITY SYSTEM AS 9100

1482 BODYCOTE Western Europe (5241) ZI rue de Tumulus Serres Castet France Mario Ammon + 33 559-331-437 HT - HEAT TREAT AMS-2759/1





1482 BODYCOTE Western Europe (5241) ZI rue de Tumulus Serres Castet France Mario Ammon + 33 559-331-437 HT - HEAT TREAT AMS-2770 Stress relieve only

1482 BODYCOTE Western Europe (5241) ZI rue de Tumulus Serres Castet France Mario Ammon + 33 559-331-437 HT - HEAT TREAT AMS-H-6875

1482 BODYCOTE Western Europe (5241) ZI rue de Tumulus Serres Castet France Mario Ammon + 33 559-331-437 HT - HEAT TREAT E.S. 21.9

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 AQS - QUALITY SYSTEM AS 9100

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP01 - COATING, PAINT APPLICATION MIL-F-18264

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) BP-111

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP11 - CONVERSION COATING, ALUMINUM MM-5516

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP12 - PASSIVATION AMS-2700

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP12 - PASSIVATION ASTM-A-967

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 CP15 - PRE-PENETRANT ETCH AC7108/15

Page (13) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 HT - STRESS RELIEF AMS-2759/11

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

206 2018-07-31 Bowman Plating, Inc (4199) 2631 East 126th Street Compton CA USA Blanca Huerta (310) 639-4343 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 AQS - QUALITY SYSTEM AS 9100

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP01 - COATING, PAINT APPLICATION LGPS-1001

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP01 - COATING, PAINT APPLICATION MIL-F-18264

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP09 - PLATING, CHROME AMS-2460

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP09 - PLATING, CHROME AMS-QQ-C-320

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP09 - PLATING, CHROME LGPS-1101

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP12 - PASSIVATION AMS-2700

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP12 - TITANIUM CLEANING LGPS-8003

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 CP15 - PRE-PENETRANT ETCH AC7108/15

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 HT - HEAT TREAT AMS-2759

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 HT - HEAT TREAT AMS-2770

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 HT - HEAT TREAT CP-0710

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 HT - HEAT TREAT MIL-H-6088

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 HT - STRESS RELIEF AMS-H-6875

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

207 Brampton Processing (4648) 171 Advance Blvd. Unit19&20 Brampton Ontario Canada Lyn Dimaranan (905) 791-9634 x104 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 AQS - QUALITY SYSTEM AC7004

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT AMS-2759/1





215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT AMS-2770

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT AMS-5629

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT AMS-H-6875

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT AMS-H-7199

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT ASTM-B-194/196

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT BP-106





215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT CP-0710

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT LGPS-2002

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT MM-4990

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT MM-4995

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - HEAT TREAT PS-2101

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - STRESS RELIEF PS-1001 Stress relief only

215 Burton Industries Inc. (4233) 243 Wyandanch Ave. West Babylon NY USA Dariusz Siniakowicz (631) 643-6660 x160 HT - STRESS RELIEF PS-1002

1149 Bytest srl (5379) Via Pisa, 12 Volpiano Italy Stefano Pasquino +39 (0)119953845 AQS - QUALITY SYSTEM AS 9100

1149 Bytest srl (5379) Via Pisa, 12 Volpiano Italy Stefano Pasquino +39 (0)119953845 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1149 Bytest srl (5379) Via Pisa, 12 Volpiano Italy Stefano Pasquino +39 (0)119953845 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

226 2018-04-30 California Drop Forge (3127) 1033 Alhambra Ave Los Angeles CA USA Minh Tang; Jose (Tony) Espinoza (323) 221-1134 X233 AQS - QUALITY SYSTEM AS 9100

226 2018-04-30 California Drop Forge (3127) 1033 Alhambra Ave Los Angeles CA USA Minh Tang; Jose (Tony) Espinoza (323) 221-1134 X233 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

226 2018-04-30 California Drop Forge (3127) 1033 Alhambra Ave Los Angeles CA USA Minh Tang; Jose (Tony) Espinoza (323) 221-1134 X233 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

226 2018-04-30 California Drop Forge (3127) 1033 Alhambra Ave Los Angeles CA USA Minh Tang; Jose (Tony) Espinoza (323) 221-1134 X233 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 AQS - QUALITY SYSTEM AC7004

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP01 - COATING, DRY FILM MIL-PRF-46010

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP01 - COATING, PAINT APPLICATION MIL-F-18264

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP02 - TEMPER ETCH INSPECTION LGPS-3000

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP09 - PLATING, COPPER AMS-2418

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP12 - PASSIVATION AMS-2700

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP12 - PASSIVATION ASTM-A-967

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 CP15 - PRE-PENETRANT ETCH AC7108/15 Aluminum alloys only

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 HT - STRESS RELIEF AMS-2759/11 950°F maximum

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

227 California Metal Processing (4012) 1518-1530 West Slauson Los Angeles CA USA Rich Stromer (323) 753-2247 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

234 2018-08-31 CANTON DROP FORGE (4423) 4575 SOUTHWAY ST. SW CANTON OH USA Dan Antos 330-704-5498 (mobile) AQS - QUALITY SYSTEM AS 9100

234 2018-08-31 CANTON DROP FORGE (4423) 4575 SOUTHWAY ST. SW CANTON OH USA Dan Antos 330-704-5498 (mobile) HT - HEAT TREAT AMS-H-6875 Anneal, Normalize and Temper only.

234 2018-08-31 CANTON DROP FORGE (4423) 4575 SOUTHWAY ST. SW CANTON OH USA Dan Antos 330-704-5498 (mobile) HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

234 2018-08-31 CANTON DROP FORGE (4423) 4575 SOUTHWAY ST. SW CANTON OH USA Dan Antos 330-704-5498 (mobile) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1376 Carlisle Brake & Friction 920 LAKE RD Medina OH USA Mark Cartellone 800-542-0972 HT - SINTERING E.S. 16.1








244 2019-03-31 Cedtech Testing Laboratories (3547) 10708 S. Garfield Ave. South Gate CA USA David Gray (323) 773-7835 AQS - QUALITY SYSTEM AS 9100

244 2019-03-31 Cedtech Testing Laboratories (3547) 10708 S. Garfield Ave. South Gate CA USA David Gray (323) 773-7835 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

244 2019-03-31 Cedtech Testing Laboratories (3547) 10708 S. Garfield Ave. South Gate CA USA David Gray (323) 773-7835 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

244 2019-03-31 Cedtech Testing Laboratories (3547) 10708 S. Garfield Ave. South Gate CA USA David Gray (323) 773-7835 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1509 Central Metal Finishing (3548) 80 Flagship Dr. North Andover MA USA Peter Cox 978-685-4811 AQS - QUALITY SYSTEM AS 9100

1509 Central Metal Finishing (3548) 80 Flagship Dr. North Andover MA USA Peter Cox 978-685-4811 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1509 Central Metal Finishing (3548) 80 Flagship Dr. North Andover MA USA Peter Cox 978-685-4811 CP09 - PLATING, ZINC NICKEL AMS-2417

1487 Certified Heat Treating 1807 W. Pleasant St. Springfield OH USA Mike Trimble 937-325-3121 AQS - QUALITY SYSTEM ISO9000

1487 Certified Heat Treating 1807 W. Pleasant St. Springfield OH USA Mike Trimble 937-325-3121 HT - HEAT TREAT AMS-2770 PN 32-565 only.

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 AQS - QUALITY SYSTEM AC7004

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 CP12 - PASSIVATION AMS-2700

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 CP12 - PASSIVATION ASTM-A-967

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

952 2015-05-31 Certified Inspection Services (3551) 21 s. 41st Street Phoenix AZ USA Nancy A. Bennett 602-267-0661 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

247 2018-07-31 Certified Steel Treating Corp. (4256) 2454 E. 58th Street Los Angeles CA USA German Nunez (323) 583-8711 AQS - QUALITY SYSTEM AC7004

247 2018-07-31 Certified Steel Treating Corp. (4256) 2454 E. 58th Street Los Angeles CA USA German Nunez (323) 583-8711 HT - HEAT TREAT AMS-2759/1






247 2018-07-31 Certified Steel Treating Corp. (4256) 2454 E. 58th Street Los Angeles CA USA German Nunez (323) 583-8711 HT - HEAT TREAT AMS-H-6875

247 2018-07-31 Certified Steel Treating Corp. (4256) 2454 E. 58th Street Los Angeles CA USA German Nunez (323) 583-8711 HT - HEAT TREAT AMS-H-7199

247 2018-07-31 Certified Steel Treating Corp. (4256) 2454 E. 58th Street Los Angeles CA USA German Nunez (323) 583-8711 HT - STRESS RELIEF AMS-2759/11 1150°F maximum

1411 Chemtron Anodize Co. (5657) 92 Taylor St. Danbury CT USA Samuel Showah 203-778-8900 AQS - QUALITY SYSTEM AC7004

Page (14) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1411 Chemtron Anodize Co. (5657) 92 Taylor St. Danbury CT USA Samuel Showah 203-778-8900 CP12 - PASSIVATION AMS-2700

1411 Chemtron Anodize Co. (5657) 92 Taylor St. Danbury CT USA Samuel Showah 203-778-8900 CP12 - PASSIVATION E.S. 6.19

253 2018-11-30 CIRCOR Aerospace Inc. (4581) 2301 Wardlow Circle Corona CA USA

LG Scott Kite; Fernando Bermudez; AWB

Blanca Contreras 951-270-6200 AQS - QUALITY SYSTEM AS 9100



Blanca Contreras 951-270-6200 CP01 - COATING, PAINT APPLICATION MIL-F-18264



Blanca Contreras 951-270-6200 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

254 2018-08-31 Clackamas Tool Welding (6035) 12316 SE Capps Road Clackamas OR USA Tim Stabio 503-655-9535 AQS - QUALITY SYSTEM AS 9100

254 2018-08-31 Clackamas Tool Welding (6035) 12316 SE Capps Road Clackamas OR USA Tim Stabio 503-655-9535 WLD - BRAZING RI-325

254 2018-08-31 Clackamas Tool Welding (6035) 12316 SE Capps Road Clackamas OR USA Tim Stabio 503-655-9535 WLD - WELDING AWS-D17.1

1437 Classic Metal Finishing Inc (8903) 2500 W Argyle Street Jackson MI USA Samuel Absher 517-990-0011 ext 204 AQS - QUALITY SYSTEM AS 9100

1437 Classic Metal Finishing Inc (8903) 2500 W Argyle Street Jackson MI USA Samuel Absher 517-990-0011 ext 204 CP01 - COATING, DRY FILM MIL-PRF-46010

1437 Classic Metal Finishing Inc (8903) 2500 W Argyle Street Jackson MI USA Samuel Absher 517-990-0011 ext 204 CP12 - PASSIVATION AMS-2700

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 AQS - QUALITY SYSTEM AS 9100

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP01 - COATING, DRY FILM MIL-L-23398

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP01 - COATING, DRY FILM MIL-PRF-46010

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP01 - COATING, PAINT APPLICATION LGPS-1001

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP01 - COATING, PAINT APPLICATION MIL-DTL-18264

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP12 - PASSIVATION AMS-2700

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP12 - PASSIVATION ASTM-A-967

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP12 - TITANIUM CLEANING ASTM-B-600

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 CP15 - PRE-PENETRANT ETCH AC7108/15

260 2017-08-31 Coast Plating Inc (4572) 128 W. 154TH ST. Gardena CA USA Eric Stoll (323) 770-0240 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

897 2018-10-31 Cobalt Enterprises, LLC (4455) 1520 - 80th. Street SW, Bld. B Everett WA USA William Delashmit 425 347-6696 ext 125 AQS - QUALITY SYSTEM AS 9100

897 2018-10-31 Cobalt Enterprises, LLC (4455) 1520 - 80th. Street SW, Bld. B Everett WA USA William Delashmit 425 347-6696 ext 125 HT - HEAT TREAT AMS-2770

897 2018-10-31 Cobalt Enterprises, LLC (4455) 1520 - 80th. Street SW, Bld. B Everett WA USA William Delashmit 425 347-6696 ext 125 HT - HEAT TREAT AMS-2771

897 2018-10-31 Cobalt Enterprises, LLC (4455) 1520 - 80th. Street SW, Bld. B Everett WA USA William Delashmit 425 347-6696 ext 125 HT - HEAT TREAT AMS-H-6088 Superseded by AMS2770 & AMS 2771

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 AQS - QUALITY SYSTEM AS 9100

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 HT - HEAT TREAT AMS-2770

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 HT - HEAT TREAT AMS-H-6875

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 HT - HEAT TREAT AMS-H-81200

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

264 2016-02-29 Consolidated Industries, Inc. (3587) 677 MIXVILLE RD. CHESHIRE CT USA Tim McHenry (203) 272-5371 ,QM: x235 NDT - INSPECTION, ULTRASONIC CPC-9104

1083 2019-01-31 Consolidated Precision Products - Cudahy (3585) 8333 Wilcox Avenue Cudahy CA USA German Rangel (323) 773-2363 AQS - QUALITY SYSTEM AS 9100

1083 2019-01-31 Consolidated Precision Products - Cudahy (3585) 8333 Wilcox Avenue Cudahy CA USA German Rangel (323) 773-2363 HT - HEAT TREAT AMS-2771

1083 2019-01-31 Consolidated Precision Products - Cudahy (3585) 8333 Wilcox Avenue Cudahy CA USA German Rangel (323) 773-2363 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approval excludes pre-penetrant etching capability

1083 2019-01-31 Consolidated Precision Products - Cudahy (3585) 8333 Wilcox Avenue Cudahy CA USA German Rangel (323) 773-2363 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1256 Consolidated Precision Products CPP - Syracuse (3151) 901 E Genesee Turnpike Chittenango NY USA Jim Scholefield 315-687-0014 AQS - QUALITY SYSTEM AS 9100

1256 Consolidated Precision Products CPP - Syracuse (3151) 901 E Genesee Turnpike Chittenango NY USA Jim Scholefield 315-687-0014 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1256 Consolidated Precision Products CPP - Syracuse (3151) 901 E Genesee Turnpike Chittenango NY USA Jim Scholefield 315-687-0014 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1256 Consolidated Precision Products CPP - Syracuse (3151) 901 E Genesee Turnpike Chittenango NY USA Jim Scholefield 315-687-0014 NDT - PRE-PENETRANT ETCH AC7108/15

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 AQS - QUALITY SYSTEM AC7004

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT AMS-2759/1







266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT AMS-H-6875

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT BP-106

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT ES-0744

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT LGPS-2002

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT MM-4990



266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - HEAT TREAT PS-2101

266 2019-02-28 Continental Heat Treating Corp (3588) 10643 S. Norwalk Road Santa Fe Springs CA USA Ken Nelson (562) 944-8808 HT - STRESS RELIEF AMS-2759/11 1150°F max. Reference Doc 200 Note # 1

268 2019-01-31 Cook Induction Heating (5069) 4925 E. Slauson Ave. Maywood CA USA Troy Doolittle (323) 560 1327 AQS - QUALITY SYSTEM AC7004

268 2019-01-31 Cook Induction Heating (5069) 4925 E. Slauson Ave. Maywood CA USA Troy Doolittle (323) 560 1327 HT - HEAT TREAT AMS-2759/1 Induction anneal

268 2019-01-31 Cook Induction Heating (5069) 4925 E. Slauson Ave. Maywood CA USA Troy Doolittle (323) 560 1327 HT - HEAT TREAT MIL-H-7199

268 2019-01-31 Cook Induction Heating (5069) 4925 E. Slauson Ave. Maywood CA USA Troy Doolittle (323) 560 1327 HT - HEAT TREAT MIL-S-12515

1565 Cooperative Plating (4661) 1605 Iglehart Ave. St. Paul MN USA Edward Wakefield 651-645-0787 AQS - QUALITY SYSTEM AC7004

1565 Cooperative Plating (4661) 1605 Iglehart Ave. St. Paul MN USA Edward Wakefield 651-645-0787 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1565 Cooperative Plating (4661) 1605 Iglehart Ave. St. Paul MN USA Edward Wakefield 651-645-0787 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18

1565 Cooperative Plating (4661) 1605 Iglehart Ave. St. Paul MN USA Edward Wakefield 651-645-0787 CP12 - PASSIVATION AMS-2700

1603 2019-01-31 CPP - PAC Foundries - Rancho (3569) 11000 Jersey Blvd. Rancho Cucamonga CA USA Cyrile Maico 909-987-4721 AQS - QUALITY SYSTEM AS 9100

1603 2019-01-31 CPP - PAC Foundries - Rancho (3569) 11000 Jersey Blvd. Rancho Cucamonga CA USA Cyrile Maico 909-987-4721 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1603 2019-01-31 CPP - PAC Foundries - Rancho (3569) 11000 Jersey Blvd. Rancho Cucamonga CA USA Cyrile Maico 909-987-4721 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 AQS - QUALITY SYSTEM AS 9100

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 HT - HEAT TREAT AMS-2771

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 HT - HEAT TREAT AMS-H-6088

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 HT - HEAT TREAT AMS-H-6875

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

273 2018-01-31 CPP - Port Hueneme (3608) 705 Industrial Ave Port Hueneme CA USA Luis Herrera; Kinjal Patel; Conny Ortiz (805) 488-6451 X4369 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1469 CPP - Steel Treaters Inc. (3804) 100 Furnace Street Oriskany NY USA Ray Tebo 315-736-3081 AQS - QUALITY SYSTEM AS 9100

1469 CPP - Steel Treaters Inc. (3804) 100 Furnace Street Oriskany NY USA Ray Tebo 315-736-3081 HT - HEAT TREAT AMS-2759/1




1469 CPP - Steel Treaters Inc. (3804) 100 Furnace Street Oriskany NY USA Ray Tebo 315-736-3081 HT - HEAT TREAT AMS-2770



1469 CPP - Steel Treaters Inc. (3804) 100 Furnace Street Oriskany NY USA Ray Tebo 315-736-3081 HT - HEAT TREAT AMS-H-6875

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 AQS - QUALITY SYSTEM AS 9100

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - MANUAL PEENING AMS-2430

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN AMS-2430

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN BP-105

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN CP-0340

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN CPC-6400

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN MMC-137

575 2016-01-31 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) 2151 S. Hathaway Santa Ana CA USA Raul Gonzalez (714) 546-4160 SE - SHOT PEEN PS-1201

Page (15) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1621 Curtiss Wright Surface Technologies India Pvt Ltd (11527) Plot No. 80, Bommasandra-Jigani Link Road, Bangalore India +91 80 2783 9652 AQS - QUALITY SYSTEM AS 9100

1621 Curtiss Wright Surface Technologies India Pvt Ltd (11527) Plot No. 80, Bommasandra-Jigani Link Road, Bangalore India +91 80 2783 9652 SE - SHOT PEEN AMS-2430

1610 Cyclone Polska sp. z o. o. (15730) ul. Fabryczna 6 Kraśnik Lubelskie Poland Piotr Sosnówka +48 818250208 CP01 - COATING, PAINT APPLICATION LGPS-1001

1610 Cyclone Polska sp. z o. o. (15730) ul. Fabryczna 6 Kraśnik Lubelskie Poland Piotr Sosnówka +48 818250208 CP15 - PRE-PENETRANT ETCH AC7108/15

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 AQS - QUALITY SYSTEM AS 9100

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 CP12 - PASSIVATION AMS-2700

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 CP12 - PASSIVATION ASTM-A-967 Type VI

278 2016-12-31 Cygnus, Inc. (4388) 122 Emerald Industrial Park Road Ponderay ID USA Karen Thompson 208-263-4761 ext 246 HT - HEAT TREAT AMS-2770

283 2015-09-30 Dan's Certified Welding (5177) 9830 Everest Street Downey CA USA Reuben Salazar (562) 803-1554 AQS - QUALITY SYSTEM AC7004

283 2015-09-30 Dan's Certified Welding (5177) 9830 Everest Street Downey CA USA Reuben Salazar (562) 803-1554 WLD - WELDING AWS-D17.1

283 2015-09-30 Dan's Certified Welding (5177) 9830 Everest Street Downey CA USA Reuben Salazar (562) 803-1554 WLD - WELDING RI-141

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 AQS - QUALITY SYSTEM AS 9100

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CMSP - GRINDING, CHROME LGPS-7000

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CMSP - GRINDING, CHROME MIL-STD-866

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP01 - COATING, DRY FILM MIL-PRF-46010

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP01 - COATING, PAINT APPLICATION MIL-PRF-85285

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP02 - TEMPER ETCH INSPECTION AMS-2649

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CHROME AMS-2406



1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CHROME AMS-QQ-C-320

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, CHROME MIL-STD-1501

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, NICKEL AMS-2403

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, NICKEL AMS-2424

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, NICKEL AMS-QQ-N-290

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP09 - PLATING, ZINC NICKEL AMS-2417

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478



1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232



MANG/ZN AMS-2480



MANG/ZN AMS-2481

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP12 - PASSIVATION AMS-2700

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP12 - PASSIVATION ASTM-A-380

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP12 - PASSIVATION ASTM-A-967

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP12 - TITANIUM CLEANING ASTM-B-600

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 CP15 - PRE-PENETRANT ETCH AC7108/15

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 HT - STRESS RELIEF AMS-2759/11

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1596 2019-01-31 DCI Aerotech Div. of Detroit Chrome Inc. (3616) 7515 Lyndon Ave. Detroit MI USA David Thompson 313-341-9478 SE - SHOT PEEN AMS-2430

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 AQS - QUALITY SYSTEM AC7004

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP07 - IVD, CADMIUM AMS-C-8837

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP07 - IVD, CADMIUM CPC-8210

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM (BRIGHT/LHE) RI-310

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME AMS-2406

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME AMS-2460

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME CP-0370

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME CPC-8221

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME ES-0602

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME LGPS-1101

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, CHROME MIL-STD-1501

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, NICKEL AMS-2403

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, NICKEL AMS-2424

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP09 - PLATING, NICKEL AMS-QQ-N-290

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP11 - CONVERSION COATING, ALUMINUM ES-0667

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP12 - PASSIVATION AMS-2700

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 HT - STRESS RELIEF AMS-2759/9 850 degree F Max

290 2017-02-28 Diamond Chrome Plating, Inc. (3618) 604 S. Michigan Ave. Howell MI USA Dianne Poulos (517) 546-0150 HT - STRESS RELIEF LGPS-2002

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 AQS - QUALITY SYSTEM AS 9100

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP01 - COATING, PAINT APPLICATION LGPS-1001

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1121 Dioxid Sp. Z o.o. (12271) ul. Miesowicza 4A Krosno Sub carpation Poland Magdalena Kolbusz +4813 4363011 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

293 Dip Braze, Inc. (3620) 9131 De Garmo Ave. Sun Valley CA USA Robert Connor (818) 768-1013 AQS - QUALITY SYSTEM AC7004

293 Dip Braze, Inc. (3620) 9131 De Garmo Ave. Sun Valley CA USA Robert Connor (818) 768-1013 WLD - BRAZING AMS-2673

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 AQS - QUALITY SYSTEM AC7004

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP09 - PLATING, CHROME AMS-2460

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP09 - PLATING, CHROME MIL-STD-1501

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

Page (16) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 HT - STRESS RELIEF AMS-2759/11 975'F maximum.

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

296 Dixon Hard Chrome, Inc (4214) 11645 Pendleton St. Sun Valley CA USA Steve Arrington (818) 767-9650 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1612 Doncasters Settas (7304) Allée Centrale Zone Industrielle Jumet Belgium Ronald Claeys +3271919210 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1612 Doncasters Settas (7304) Allée Centrale Zone Industrielle Jumet Belgium Ronald Claeys +3271919210 NDT - PRE-PENETRANT ETCH AC7108/15

1244 Doncasters Southern Tool (4425) 508 Hamric Dr. West Oxford AL USA Jennifer Waldrep 256-231-5427 AQS - QUALITY SYSTEM AS 9100

1244 Doncasters Southern Tool (4425) 508 Hamric Dr. West Oxford AL USA Jennifer Waldrep 256-231-5427 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-pene trant etch capability on-site

1244 Doncasters Southern Tool (4425) 508 Hamric Dr. West Oxford AL USA Jennifer Waldrep 256-231-5427 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1368 DRT Power Systems - Sidney, LLC 1950 CAMPBELL RD Sidney OH USA Mitch Morse (Quality Mgr) 937-492-6121 CMSP - GRINDING, HVOF AMS-2449

302 Ducommun AeroStructures El Mirage (3110) 4001 El Mirage Road Adelanto CA USA David Pang 760-246-4191 AQS - QUALITY SYSTEM AS 9100 Added to allow chem milling per BAC5759 PSD 6-16.

302 Ducommun AeroStructures El Mirage (3110) 4001 El Mirage Road Adelanto CA USA David Pang 760-246-4191 CP05 - CHEMICAL MILLING AMS-C-81769

1401 2017-09-30 Ducommun LaBarge Technologies (8744) 1505 Maiden Lane Joplin MO USA Dave Norman 417-781-3200 AQS - QUALITY SYSTEM AS 9100 Electronics for AWB as per Nadcap scope.

305 2015-10-31 Duval Precision Grinding Inc. (12095) 940 Sheridan St. Chicopee MA USA Ron Parlengas (413) 593-3060 AQS - QUALITY SYSTEM AS 9100

305 2015-10-31 Duval Precision Grinding Inc. (12095) 940 Sheridan St. Chicopee MA USA Ron Parlengas (413) 593-3060 CMSP - GRINDING, CHROME LGPS-7000

305 2015-10-31 Duval Precision Grinding Inc. (12095) 940 Sheridan St. Chicopee MA USA Ron Parlengas (413) 593-3060 CMSP - GRINDING, CHROME MIL-STD-866

305 2015-10-31 Duval Precision Grinding Inc. (12095) 940 Sheridan St. Chicopee MA USA Ron Parlengas (413) 593-3060 CMSP - GRINDING, HVOF LGPS-7010

1608 Dynachrome (9226) 50 Parker St. Newburyport MA USA Larry Cellamare 978-499-8950 AQS - QUALITY SYSTEM AC7004

1608 Dynachrome (9226) 50 Parker St. Newburyport MA USA Larry Cellamare 978-499-8950 CP09 - PLATING, CHROME AMS-2406



1608 Dynachrome (9226) 50 Parker St. Newburyport MA USA Larry Cellamare 978-499-8950 CP09 - PLATING, CHROME AMS-QQ-C-320

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 AQS - QUALITY SYSTEM AC7004

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP01 - COATING, PAINT APPLICATION MIL-F-18264

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP08 - ANODIZE, TITANIUM AMS-2488

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP11 - CONVERSION COATING, ALUMINUM MM-5516

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP12 - PASSIVATION AMS-2700

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP12 - PASSIVATION ASTM-A-967

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 CP15 - PRE-PENETRANT ETCH AC7108/15

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

327 2019-08-31 E.M.E. Inc. (4111) 500 E. Pine St. Compton CA USA John Lopez (310) 639-1621 x107 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

325 2015-10-31 E/M Coating Services - CT (3639) 1 John Downey Drive New Britain CT USA Steven Hartford (860) 224-9148 ,QM: x210 AQS - QUALITY SYSTEM AS 9100

325 2015-10-31 E/M Coating Services - CT (3639) 1 John Downey Drive New Britain CT USA Steven Hartford (860) 224-9148 ,QM: x210 CP01 - COATING, DRY FILM MIL-PRF-46010

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 AQS - QUALITY SYSTEM AS 9100

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP01 - COATING, DRY FILM AS-5272

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP01 - COATING, DRY FILM MIL-PRF-46010

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP01 - COATING, DRY FILM MM-1920

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP08 - ANODIZE, TITANIUM AMS-2488

Approved for LG part numbers 161A1167-402/403, 161A1168-

401, 161T1062-1 , 161T1070-1, 161T1074-1, 161U0050-1,

163U2508-1, 162W1525 & 162W1526; and for AWB supplier

Crissair Inc. Type 2 only.

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952



108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP12 - PASSIVATION AMS-2700

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 CP12 - PASSIVATION ASTM-A-967

108 2018-01-31 E/M Coating Services (3640) 6940 Farmdale Ave. North Hollywood CA USA Tony Quiros (818) 983-1952 HT - STRESS RELIEF AMS-2759/11

112 EATON AEROQUIP (JACKSON) (3642) 300 SOUTH EAST AVE. JACKSON MI USA David Staten 517-789-2790 AQS - QUALITY SYSTEM AS 9100

112 EATON AEROQUIP (JACKSON) (3642) 300 SOUTH EAST AVE. JACKSON MI USA David Staten 517-789-2790 CP01 - COATING, DRY FILM MIL-PRF-46010

112 EATON AEROQUIP (JACKSON) (3642) 300 SOUTH EAST AVE. JACKSON MI USA David Staten 517-789-2790 CP12 - PASSIVATION AMS-2700

1624 Electro-Kut Inc.(4625) 2105 Michelin Laval Quebec Canada Chantal Landry 450-682-9666 AQS - QUALITY SYSTEM AS 9100

1624 Electro-Kut Inc.(4625) 2105 Michelin Laval Quebec Canada Chantal Landry 450-682-9666 NM - EDM (Electro Discharge Machining) N/A As per contractual and engineering drawing requirements.

317 Electrolizing, Inc. (4228) 1947 Hooper Ave. Los Angeles CA USA Jack Morgan (213) 749-7876 ext. 106 AQS - QUALITY SYSTEM AC7004

317 Electrolizing, Inc. (4228) 1947 Hooper Ave. Los Angeles CA USA Jack Morgan (213) 749-7876 ext. 106 CP09 - PLATING, CHROME AMS-2406

317 Electrolizing, Inc. (4228) 1947 Hooper Ave. Los Angeles CA USA Jack Morgan (213) 749-7876 ext. 106 CP09 - PLATING, CHROME AMS-2438 Part number 901-036-401-103

317 Electrolizing, Inc. (4228) 1947 Hooper Ave. Los Angeles CA USA Jack Morgan (213) 749-7876 ext. 106 CP09 - PLATING, CHROME E.S. 6.146

317 Electrolizing, Inc. (4228) 1947 Hooper Ave. Los Angeles CA USA Jack Morgan (213) 749-7876 ext. 106 HT - STRESS RELIEF AMS-2759/11 750'F maximum

1474 2018-07-31 Electron Beam Welding - CA (3648) 6940 Hermosa Circle Buena Park CA USA Larry Sato 714-670-9119 AQS - QUALITY SYSTEM AC7004

1474 2018-07-31 Electron Beam Welding - CA (3648) 6940 Hermosa Circle Buena Park CA USA Larry Sato 714-670-9119 HT - STRESS RELIEF AMS-2759/11

1474 2018-07-31 Electron Beam Welding - CA (3648) 6940 Hermosa Circle Buena Park CA USA Larry Sato 714-670-9119 WLD - WELDING AMS-2680

1474 2018-07-31 Electron Beam Welding - CA (3648) 6940 Hermosa Circle Buena Park CA USA Larry Sato 714-670-9119 WLD - WELDING AMS-2681

1474 2018-07-31 Electron Beam Welding - CA (3648) 6940 Hermosa Circle Buena Park CA USA Larry Sato 714-670-9119 WLD - WELDING AWS-D17.1

807 Element Cleveland (4344) 5405 East Schaaf Road Cleveland OH USA Jeff Smith (216) 524-8045 AQS - QUALITY SYSTEM ISO 17025

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 AQS - QUALITY SYSTEM AS 9100

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 CP15 - PRE-PENETRANT ETCH AC7108/15

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, RADIOGRAPHIC MIL-STD-453

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

808 2018-03-31 Element Materials Technology Rancho Dominguez (3657) 18100 S. Wilmington Ave. Rancho Dominguez CA USA Kristina Plaza (310) 632-8500 X21243 NDT - INSPECTION, ULTRASONIC CPC-9104

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 AQS - QUALITY SYSTEM AS 9100

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CMSP - GRINDING, CHROME LGPS-7000

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CMSP - GRINDING, CHROME MIL-STD-866

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CMSP - GRINDING, CHROME MM-4990-5

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CMSP - GRINDING, HVOF LGPS-7010

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, DRY FILM CP-0420

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, DRY FILM MIL-L-23398

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, DRY FILM MIL-PRF-46010

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, DRY FILM MM-1920

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, DRY FILM MMC-155

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, PAINT APPLICATION BR-167

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, PAINT APPLICATION LGPS-1001

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, PAINT APPLICATION MIL-F-18264

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, PAINT APPLICATION MM-5748

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP01 - COATING, RESIN MIL-PRF-3043

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP07 - IVD, ALUMINUM MIL-DTL-83488 Class 1, 2, 3; Type I and II

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP07 - IVD, CADMIUM AMS-C-8837

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP07 - IVD, CADMIUM CP-0400

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP07 - IVD, CADMIUM CPC-8210

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) BP-111

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) CP-0410

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2401

Page (17) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM (BRIGHT/LHE) RI-310

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CHROME AMS-2406

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CHROME AMS-2460

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CHROME AMS-QQ-C-320

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CHROME LGPS-1101

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, CHROME MIL-STD-1501

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, NICKEL AMS-2403

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, NICKEL AMS-2424

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, NICKEL AMS-QQ-N-290

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, SILVER AMS-2410

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, SILVER AMS-2412

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP09 - PLATING, SILVER ASTM-B-700

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP11 - CONVERSION COATING, ALUMINUM MM-5516

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842



326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924



MANG/ZN AMS-2481




326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP12 - PASSIVATION AMS-2700

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP12 - PASSIVATION ASTM-A-967

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP12 - TITANIUM CLEANING ASTM-B-600

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP14 - STRIPPING, HVOF AMS-2448

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CP14 - STRIPPING, HVOF LGPS-1300

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CT - HVOF AMS-2447

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 CT - HVOF LGPS-1301

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 HT - STRESS RELIEF AMS-2759/11 Stress relief up to 975°F maximum

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 HT - STRESS RELIEF See Note 1 See 'Notes' tab Note 1 - Stress relief up to 975°F maximum

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, LIQUID PENETRANT MM-4971

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, TEMPER ETCH BP-108

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, TEMPER ETCH LGPS-3000

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - INSPECTION, TEMPER ETCH MIL-STD-867

326 2018-10-31 Embee Processing, LLC. (3337) 2136 S. Hathaway St. Santa Ana CA USA Mitch Tanner (714) 546-9842 NDT - PRE-PENETRANT ETCH AC7108/15

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 AQS - QUALITY SYSTEM AS 9100

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT AMS-2759/1








328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT AMS-H-6875

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT BP-106




328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT CP-0360



328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT LGPS-2000

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT LGPS-2002

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT MM-4990



328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT MMC-207

328 2015-08-31 Engineered Heat Treat, Inc. (3341) 31271 Stephenson Hwy. Madison Heights MI USA Jane Bush (248) 588-5141 HT - HEAT TREAT PS-2101

344 2018-10-31 ESNA - Fitz Aerospace (9471) 6625 Iron Horse Blvd. North Richland Hills TX USA Ron Oxford 817-281-8816 AQS - QUALITY SYSTEM AS 9100

344 2018-10-31 ESNA - Fitz Aerospace (9471) 6625 Iron Horse Blvd. North Richland Hills TX USA Ron Oxford 817-281-8816 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

344 2018-10-31 ESNA - Fitz Aerospace (9471) 6625 Iron Horse Blvd. North Richland Hills TX USA Ron Oxford 817-281-8816 CP09 - PLATING, ZINC NICKEL AMS-2417

344 2018-10-31 ESNA - Fitz Aerospace (9471) 6625 Iron Horse Blvd. North Richland Hills TX USA Ron Oxford 817-281-8816 CP12 - PASSIVATION AMS-2700 Type 2 only

344 2018-10-31 ESNA - Fitz Aerospace (9471) 6625 Iron Horse Blvd. North Richland Hills TX USA Ron Oxford 817-281-8816 HT - STRESS RELIEF AMS-2759/11 375°F maximum

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 AQS - QUALITY SYSTEM AS 9100

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP01 - COATING, DRY FILM MIL-PRF-46010

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP01 - COATING, PAINT APPLICATION MIL-F-18264

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) BP-111

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CADMIUM (BRIGHT/LHE) RI-310

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CHROME AMS-2460

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CHROME CPC-8220

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CHROME LGPS-1101

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, CHROME MIL-STD-1501

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, COPPER AMS-2418

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, ZINC NICKEL AMS-2417

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP09 - PLATING, ZINC NICKEL LGPS-1106

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP12 - PASSIVATION AMS-2700

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP12 - PASSIVATION ASTM-A-967

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP12 - TITANIUM CLEANING ASTM-B-600

Page (18) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 CP15 - PRE-PENETRANT ETCH AC7108/15

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 HT - STRESS RELIEF AMS-2759/11 1100'F maximum

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - MANUAL PEENING AMS-2430

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - MANUAL PEENING LGPS-1501

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - SHOT PEEN AMS-2430

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - SHOT PEEN BP-105

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - SHOT PEEN CPC-6400

445 2018-09-30 Esterline Hytek Finishes (4508) 8127 S. 216TH ST. Kent WA USA Bruce Pleake (253) 796-4548 SE - SHOT PEEN MMC-137

1412 Evans Heat Treating (4418) 360 Red Lion Rd. Huntingdon Valley PA USA William Colon 215-938-8791 AQS - QUALITY SYSTEM AC7004

1412 Evans Heat Treating (4418) 360 Red Lion Rd. Huntingdon Valley PA USA William Colon 215-938-8791 HT - HEAT TREAT AMS-2759/1

1412 Evans Heat Treating (4418) 360 Red Lion Rd. Huntingdon Valley PA USA William Colon 215-938-8791 HT - HEAT TREAT AMS-2759/3

330 2017-07-12 Exactatherm Ltd. (4642) 2381 Anson Dr. Mississiauga Ontario Canada Zubair Alam (905) 677-7822 AQS - QUALITY SYSTEM AS 9100

330 2017-07-12 Exactatherm Ltd. (4642) 2381 Anson Dr. Mississiauga Ontario Canada Zubair Alam (905) 677-7822 HT - HEAT TREAT AMS-2759/1





330 2017-07-12 Exactatherm Ltd. (4642) 2381 Anson Dr. Mississiauga Ontario Canada Zubair Alam (905) 677-7822 HT - HEAT TREAT AMS-2759/8 ION NITRIDING

330 2017-07-12 Exactatherm Ltd. (4642) 2381 Anson Dr. Mississiauga Ontario Canada Zubair Alam (905) 677-7822 HT - HEAT TREAT AMS-H-6875

330 2017-07-12 Exactatherm Ltd. (4642) 2381 Anson Dr. Mississiauga Ontario Canada Zubair Alam (905) 677-7822 HT - HEAT TREAT MMC-282

331 2018-05-31 Exotic Tool Welding Company (5464) 2909 Seaway Blvd.-, Suite B Everett WA USA Tim Hickock 425-745-5200 AQS - QUALITY SYSTEM AS 9100

331 2018-05-31 Exotic Tool Welding Company (5464) 2909 Seaway Blvd.-, Suite B Everett WA USA Tim Hickock 425-745-5200 WLD - BRAZING MIL-B-7883

331 2018-05-31 Exotic Tool Welding Company (5464) 2909 Seaway Blvd.-, Suite B Everett WA USA Tim Hickock 425-745-5200 WLD - WELDING AMS-STD-2219

331 2018-05-31 Exotic Tool Welding Company (5464) 2909 Seaway Blvd.-, Suite B Everett WA USA Tim Hickock 425-745-5200 WLD - WELDING AWS-D17.1

331 2018-05-31 Exotic Tool Welding Company (5464) 2909 Seaway Blvd.-, Suite B Everett WA USA Tim Hickock 425-745-5200 WLD - WELDING CPC-5204

PN 1881A-112-01 only. Welder qualification IAW specification

AWS D17.1 is acceptable.

1229 Exova (UK) Ltd (3962) Blackbrook Business Park, Unit 1 Narrowboat Way Dudley, West Midlands UK Ramila Patel + 44 (0) 330 222 0321 AQS - QUALITY SYSTEM AC7004 Processing to GAS specifications only

341 2015-02-28 Final Finish Corp 596 East Highland Road Macedonia OH USA Deena Weber (440) 439-3303 CP01 - COATING, PAINT APPLICATION BR-167

341 2015-02-28 Final Finish Corp 596 East Highland Road Macedonia OH USA Deena Weber (440) 439-3303 CP01 - COATING, PAINT APPLICATION LGPS-1001

341 2015-02-28 Final Finish Corp 596 East Highland Road Macedonia OH USA Deena Weber (440) 439-3303 CP01 - COATING, PAINT APPLICATION MIL-F-18264

341 2015-02-28 Final Finish Corp 596 East Highland Road Macedonia OH USA Deena Weber (440) 439-3303 CP01 - COATING, PAINT APPLICATION MM-5748

1079 Firth Rixson Forgings Ltd. River Don (4752) Milford Street Sheffield South Yorkshire UK Michael Baldwin

+44 114 219 3198

+44 114 219 3198 AQS - QUALITY SYSTEM AS 9100

1079 Firth Rixson Forgings Ltd. River Don (4752) Milford Street Sheffield South Yorkshire UK Michael Baldwin

+44 114 219 3198

+44 114 219 3198 HT - HEAT TREAT AMS-H-6875

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 AQS - QUALITY SYSTEM AS 9100

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CMSP - GRINDING, CHROME LGPS-7000

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CMSP - GRINDING, CHROME MIL-STD-866

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CMSP - GRINDING, CHROME MM-4990-5

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP01 - COATING, PAINT APPLICATION MIL-F-18264

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP01 - COATING, PAINT APPLICATION MM-5748

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP02 - TEMPER ETCH INSPECTION LGPS-3000

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MM-4951 (Superceded by LGPS 1100)

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CHROME AMS-2460

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, CHROME AMS-QQ-C-320

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP09 - PLATING, NICKEL AMS-2424

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP12 - PASSIVATION AMS-2700

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 CP15 - PRE-PENETRANT ETCH AC7108/15

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 HT - STRESS RELIEF AMS-2759/11

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 SE - FLAPPER / ROTO PEENING AMS-2590

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 SE - SHOT PEEN AMS-2430

347 Fokker Landing Gear B.V. (7454) Grasbeemd 28 Helmond THE NETHERLANDS Richard Dukker +31 0 612993560 SE - SHOT PEEN MMC-137

1192 Fonderies et Ateliers du Belier (6870) 2 Plantier de la Reine Verac Aquitaine France Xavier BERDEAUX +33-(0)5-57-55-03-00 AQS - QUALITY SYSTEM AS 9100 Processing to GAS/APS specifications only

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 AQS - QUALITY SYSTEM AS 9100

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 CP15 - PRE-PENETRANT ETCH AC7108/15

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 HT - HEAT TREAT AMS-2770

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 HT - HEAT TREAT AMS-H-6875

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1150 Fucine Umbre (8092) 22 via del Sersimone Terni Italy Riccardo Massi 0039 0744 300002 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

1104 Fukada Netsusyori Kogyo Co., Ltd. (10823) 55-229-1 Yatano Komatsu-City Ishikawa Prefecture Japan Masafumi Shimada +81-761-43-3000 AQS - QUALITY SYSTEM JISQ9100

1104 Fukada Netsusyori Kogyo Co., Ltd. (10823) 55-229-1 Yatano Komatsu-City Ishikawa Prefecture Japan Masafumi Shimada +81-761-43-3000 HT - HEAT TREAT AMS-2759/1



1475 Galaxy Brazing Inc. (4872) 10015 Freeman Ave Santa Fe Springs CA USA Vladimir Shpaner 562-946-9039 ext 18 AQS - QUALITY SYSTEM AC7004

1475 Galaxy Brazing Inc. (4872) 10015 Freeman Ave Santa Fe Springs CA USA Vladimir Shpaner 562-946-9039 ext 18 WLD - BRAZING AMS-2675 Nadcap HT certified

1475 Galaxy Brazing Inc. (4872) 10015 Freeman Ave Santa Fe Springs CA USA Vladimir Shpaner 562-946-9039 ext 18 WLD - WELDING AWS-D17.1

1167 GALVAIR srl, (7419) Via T. Edison 10 Barberino di Mugello, Firenze Italy Giuseppe Riva +39558420198 AQS - QUALITY SYSTEM AS 9100

1167 GALVAIR srl, (7419) Via T. Edison 10 Barberino di Mugello, Firenze Italy Giuseppe Riva +39558420198 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1167 GALVAIR srl, (7419) Via T. Edison 10 Barberino di Mugello, Firenze Italy Giuseppe Riva +39558420198 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1167 GALVAIR srl, (7419) Via T. Edison 10 Barberino di Mugello, Firenze Italy Giuseppe Riva +39558420198



1167 GALVAIR srl, (7419) Via T. Edison 10 Barberino di Mugello, Firenze Italy Giuseppe Riva +39558420198 CP12 - PASSIVATION AMS-2700

362 2015-11-30 General Dynamics Ordnance & Tactical Systems (4129) 1200 N. Glenbrook Dr. Garland TX USA Ira Hughes 972-494-7733 AQS - QUALITY SYSTEM AS 9100

362 2015-11-30 General Dynamics Ordnance & Tactical Systems (4129) 1200 N. Glenbrook Dr. Garland TX USA Ira Hughes 972-494-7733 HT - HEAT TREAT AMS-2772

362 2015-11-30 General Dynamics Ordnance & Tactical Systems (4129) 1200 N. Glenbrook Dr. Garland TX USA Ira Hughes 972-494-7733 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1593 General Magnaplate Corp. (4571) 1331 West Edgar Rd. Linden NJ USA Robert McKenzie 908-862-6200 AQS - QUALITY SYSTEM AC7004

1593 General Magnaplate Corp. (4571) 1331 West Edgar Rd. Linden NJ USA Robert McKenzie 908-862-6200 CP01 - COATING, DRY FILM MIL-L-23398

1593 General Magnaplate Corp. (4571) 1331 West Edgar Rd. Linden NJ USA Robert McKenzie 908-862-6200 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 AQS - QUALITY SYSTEM AS 9100

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT AMS-2759/1




363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT AMS-5355

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT AMS-H-6875

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT LGPS-2000

363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - HEAT TREAT LGPS-2002

Page (19) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


363 2018-01-31 General Metal Heat Treat (4457) 941 Addison Road Cleveland OH USA Tony Tenaglier (216) 391-0886 HT - STRESS RELIEF AMS-2759/11

1160 2015-07-31 Globe Engineering Co. (4156) 1539 S Saint Paul St. Wichita KS USA Andrew Chambers 316-943-1266 AQS - QUALITY SYSTEM AS 9100

1160 2015-07-31 Globe Engineering Co. (4156) 1539 S Saint Paul St. Wichita KS USA Andrew Chambers 316-943-1266 HT - HEAT TREAT AMS-2759/3

1160 2015-07-31 Globe Engineering Co. (4156) 1539 S Saint Paul St. Wichita KS USA Andrew Chambers 316-943-1266 HT - HEAT TREAT AMS-2759/4

1160 2015-07-31 Globe Engineering Co. (4156) 1539 S Saint Paul St. Wichita KS USA Andrew Chambers 316-943-1266 HT - HEAT TREAT AMS-2770




374 2016-06-30 Globe Grinding Corp (5871) 1365 Akron Street Copiague NY USA Robert Rapisarda (631) 694-1970 AQS - QUALITY SYSTEM AC7004

374 2016-06-30 Globe Grinding Corp (5871) 1365 Akron Street Copiague NY USA Robert Rapisarda (631) 694-1970 CMSP - GRINDING, CHROME LGPS-7000

374 2016-06-30 Globe Grinding Corp (5871) 1365 Akron Street Copiague NY USA Robert Rapisarda (631) 694-1970 CMSP - GRINDING, CHROME MIL-STD-866

374 2016-06-30 Globe Grinding Corp (5871) 1365 Akron Street Copiague NY USA Robert Rapisarda (631) 694-1970 CMSP - GRINDING, CHROME MM-4990-5

377 GODFREY & WING, INC. 220 Campus Rd Aurora OH USA Han Sim (330) 562-1440 AQS - QUALITY SYSTEM TS16949

377 GODFREY & WING, INC. 220 Campus Rd Aurora OH USA Han Sim (330) 562-1440 NA - COATING, VACUUM IMPREGNATED CHROME CPC-8220

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 AQS - QUALITY SYSTEM AC7004

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP01 - COATING, PAINT APPLICATION MIL-F-18264

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP01 - COATING, PAINT APPLICATION MIL-STD-7179

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP01 - COATING, PAINT APPLICATION MM-5748

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP11 - CONVERSION COATING, ALUMINUM MM-5516

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP12 - PASSIVATION AMS-2700

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP12 - PASSIVATION ASTM-A-967

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP12 - TITANIUM CLEANING ASTM-B-600 Descaling & Cleaning of Titanium Alloy Surfaces

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 CP15 - PRE-PENETRANT ETCH AC7108/15

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 NDT - INSPECTION, LIQUID PENETRANT MM-4917

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

378 Golden State Magnetic & Penetrant Lab, Inc. (4729) 9301 Laurel Canyon Blvd Arleta CA USA Thomas Kristensen 818-767-5767 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

1227 Goodrich Actuation Systems - Wolverhampton (5918) Stafford Road Fordhouses Wolverhampton West Midlands UK Kevin Wicks +44 01902-624-646 AQS - QUALITY SYSTEM AS 9100

1575 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) Tajecina 111, Jasionka Sub Carpation Poland Mirosław Rybak 0048 178669000 CP01 - COATING, PAINT APPLICATION E.S. 6.123




1575 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) Tajecina 111, Jasionka Sub Carpation Poland Mirosław Rybak 0048 178669000 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

Comment:This approval includes removal of anodic coating per

MIL-STD-871 as well.

1575 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) Tajecina 111, Jasionka Sub Carpation Poland Mirosław Rybak 0048 178669000 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

Pre-penetrant etch capability on-site. Will be Nadcap audited to

AC7108/15 in Q3 2019.

1575 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) Tajecina 111, Jasionka Sub Carpation Poland Mirosław Rybak 0048 178669000 NDT - INSPECTION, LIQUID PENETRANT E.S. 10.70

Comment:This approval includes Aluminum etching process and

Conversion Coating to prevent corrosion prior FPI per Materials

Report No MR 2017-0052

1575 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) Tajecina 111, Jasionka Sub Carpation Poland Mirosław Rybak 0048 178669000 SE - SHOT PEEN E.S. 5.30

392 Goodrich Landing Systems - Burlington (4420) 5415 N. Service Road Burlington Ontario Canada Jay Lind (905) 319-3006 (244) AQS - QUALITY SYSTEM AS 9100 Design & Development exception taken on AS9100

392 Goodrich Landing Systems - Burlington (4420) 5415 N. Service Road Burlington Ontario Canada Jay Lind (905) 319-3006 (244) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

392 Goodrich Landing Systems - Burlington (4420) 5415 N. Service Road Burlington Ontario Canada Jay Lind (905) 319-3006 (244) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

392 Goodrich Landing Systems - Burlington (4420) 5415 N. Service Road Burlington Ontario Canada Jay Lind (905) 319-3006 (244) SE - MANUAL PEENING AMS-2430

392 Goodrich Landing Systems - Burlington (4420) 5415 N. Service Road Burlington Ontario Canada Jay Lind (905) 319-3006 (244) SE - SHOT PEEN AMS-2430

393 Goodrich Landing Systems Services - Miami (7842) 3201 NW 167th Street Miami Gardens FL USA Dave Elsass 305-622-4569 AQS - QUALITY SYSTEM AS 9110

393 Goodrich Landing Systems Services - Miami (7842) 3201 NW 167th Street Miami Gardens FL USA Dave Elsass 305-622-4569 CP01 - COATING, CERAMIC METALLIC (SERMETEL®) MMC-370 F-22 landing gear spares for OE

1590 H&S Inspection Service Inc. (3154) 422 Oliver Dr. Troy MI USA Matthew Virzi 248-362-8141 AQS - QUALITY SYSTEM AC7004

1590 H&S Inspection Service Inc. (3154) 422 Oliver Dr. Troy MI USA Matthew Virzi 248-362-8141 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

1590 H&S Inspection Service Inc. (3154) 422 Oliver Dr. Troy MI USA Matthew Virzi 248-362-8141 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

405 2017-02-28 Hadd-Co Inspection Laboratory (4223) 2420 Amsler St. Torrance CA USA Andre David (310) 325-7620 AQS - QUALITY SYSTEM AC7004

405 2017-02-28 Hadd-Co Inspection Laboratory (4223) 2420 Amsler St. Torrance CA USA Andre David (310) 325-7620 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

405 2017-02-28 Hadd-Co Inspection Laboratory (4223) 2420 Amsler St. Torrance CA USA Andre David (310) 325-7620 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1265 Harbor Castings, Inc. (16586) 2508 Bailey Road Cuyahoga Falls OH USA Jerry Ott 330-499-7178 AQS - QUALITY SYSTEM AS 9100

1265 Harbor Castings, Inc. (16586) 2508 Bailey Road Cuyahoga Falls OH USA Jerry Ott 330-499-7178 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 AQS - QUALITY SYSTEM AC7004

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP01 - COATING, DRY FILM MIL-L-23398

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP01 - COATING, DRY FILM MIL-L-81329

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP01 - COATING, DRY FILM MIL-PRF-46010

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP01 - COATING, PAINT APPLICATION MIL-F-18264

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP08 - ANODIZE, TITANIUM AMS-2488

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, CHROME AMS-2406

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, CHROME AMS-2460

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, CHROME AMS-QQ-C-320

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, CHROME E.S. 6.131

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, NICKEL AMS-2403

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, NICKEL AMS-QQ-N-290

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, NICKEL - Cadmium Diffused E.S. 5.18

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP09 - PLATING, ZINC NICKEL AMS-2417

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP12 - PASSIVATION AMS-2700

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP12 - PASSIVATION ASTM-A-380

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP12 - PASSIVATION ASTM-A-967

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 CP12 - TITANIUM CLEANING ASTM-B-600

409 2018-10-31 Har-Conn Chrome Co (3159) 603 New Park Ave. West Hartford CT USA Wes Backus (860) 236-6801 HT - STRESS RELIEF AMS-2759/11

412 2016-02-28 HDI Landing gear - Cleveland (12098) 15900 Foltz Industrial Parkway Strongsville OH USA Michel Ribout

(440) 783-5255 x6605 Cell 440-



(440) 783-5255 x6605 Cell 440-

666-4581 CMSP - GRINDING, CHROME LGPS-7000 Barkhausen capable


(440) 783-5255 x6605 Cell 440-

666-4581 CMSP - GRINDING, CHROME MIL-STD-866 Barkhausen capable

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 AQS - QUALITY SYSTEM AC7004

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT AMS-2759

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT AMS-2759/1








416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT AMS-H-6875

Page (20) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT AMS-H-81200

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT BP-106





416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT CP-0360

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT CP-0390

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT LGPS-2000

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT LGPS-2002

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT MM-4990

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT MM-4995

416 2019-10-31 Hercules Heat Treating Corp (3166) 101-113 Classon Ave. Brooklyn NY USA Anthony Rizzo (718) 625-1266 HT - HEAT TREAT PS-2101

418 2015-09-15 Heroux Devtek Laval (4589) 3675 Industrial Blvd. BLVD. Laval Quebec Canada Pascal Lavoie

450-629-3454 ext 3359 (cell 514-

712-3580) AQS - QUALITY SYSTEM AS 9100


450-629-3454 ext 3359 (cell 514-

712-3580) CP01 - COATING, PAINT APPLICATION MIL-F-18264


450-629-3454 ext 3359 (cell 514-

712-3580) CP02 - TEMPER ETCH INSPECTION LGPS-3000


450-629-3454 ext 3359 (cell 514-

712-3580) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417


450-629-3454 ext 3359 (cell 514-

712-3580) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444


450-629-3454 ext 3359 (cell 514-

712-3580) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

1374 Hitchiner Mfg Company Ferrous (3171) 594 ELM STREET MILFORD NH USA Matthew Wallace 603-732-1509 AQS - QUALITY SYSTEM AS 9100

1374 Hitchiner Mfg Company Ferrous (3171) 594 ELM STREET MILFORD NH USA Matthew Wallace 603-732-1509 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant capability on-site

1374 Hitchiner Mfg Company Ferrous (3171) 594 ELM STREET MILFORD NH USA Matthew Wallace 603-732-1509 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1374 Hitchiner Mfg Company Ferrous (3171) 594 ELM STREET MILFORD NH USA Matthew Wallace 603-732-1509 WLD - WELDING AWS-D17.1

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 AQS - QUALITY SYSTEM AS 9100

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, DRY FILM MIL-L-23398

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, DRY FILM MIL-PRF-46010

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, DRY FILM MM-1920

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, PAINT APPLICATION BR-167

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, PAINT APPLICATION LGPS-1001

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP01 - COATING, PAINT APPLICATION MM-5748

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP02 - TEMPER ETCH INSPECTION AMS-2649

Local etch only, limited to components for repair from the UTAS

Ft. Worth assembly facility only. The process must be performed

under the direction of the HTMF process engineer.

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP02 - TEMPER ETCH INSPECTION LGPS-3000

Local etch only, limited to components for repair from the UTAS



1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP09 - PLATING, CADMIUM (BRIGHT/LHE) CP-0330

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP09 - PLATING, ZINC NICKEL AMS-2417

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP12 - PASSIVATION AMS-2700

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP12 - PASSIVATION ASTM-A-380

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP12 - PASSIVATION ASTM-A-967

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP12 - PASSIVATION CP-0520

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP12 - TITANIUM CLEANING LGPS-8003

Local titanium clean for repair/rework purposes for the UTAS LG



1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

Limited to components for repair from the UTAS LG Ft. Worth

assembly facility only. The process must be performed in the

presence of the HTMF process engineer.

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

Limited to components for repair from the UTAS LG Ft. Worth

assembly facility only. The process must be performed in the

presence of the HTMF process engineer.

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 CP15 - PRE-PENETRANT ETCH AC7108/15

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 HT - HEAT TREAT AMS-2759/3

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 HT - HEAT TREAT AMS-H-6875

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 HT - HEAT TREAT BP-124

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 HT - STRESS RELIEF AMS-2759/1 Up to 1150'F




1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 HT - STRESS RELIEF AMS-H-6875 Up to 1150'F

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

1211 2017-09-30 Hi-Tech Metal Finishing, Inc. (11426) 3100 Jim Christal Road Denton TX USA Dulce Petry 940-243-0516 SE - FLAPPER / ROTO PEENING AMS-2590

Limited to components for repair from the UTAS Ft. Worth

assembly facility only. The process must be performed under the

direction of the HTMF process engineer.

425 2018-10-31 HITEMCO (3173) 160 Bethpage-Sweet Hollow Rd. Old Bethpage NY USA Dennis Pepino (516) 752-7882 AQS - QUALITY SYSTEM AS 9100

425 2018-10-31 HITEMCO (3173) 160 Bethpage-Sweet Hollow Rd. Old Bethpage NY USA Dennis Pepino (516) 752-7882 CT - GRINDING, HVOF LGPS-7010

425 2018-10-31 HITEMCO (3173) 160 Bethpage-Sweet Hollow Rd. Old Bethpage NY USA Dennis Pepino (516) 752-7882 CT - GRINDING, HVOF LGPS-7013 Landis Belt Grinder, SN 832-23

425 2018-10-31 HITEMCO (3173) 160 Bethpage-Sweet Hollow Rd. Old Bethpage NY USA Dennis Pepino (516) 752-7882 CT - HVOF E.S. 6.195 Torque bars only

425 2018-10-31 HITEMCO (3173) 160 Bethpage-Sweet Hollow Rd. Old Bethpage NY USA Dennis Pepino (516) 752-7882 CT - HVOF LGPS-1301

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 AQS - QUALITY SYSTEM AS 9100

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP01 - COATING, DRY FILM MIL-PRF-46010

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP01 - COATING, PAINT APPLICATION BR-167

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP01 - COATING, PAINT APPLICATION MIL-F-18264

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP07 - IVD, CADMIUM AMS-C-8837

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP07 - IVD, CADMIUM CPC-8210

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP09 - PLATING, NICKEL AMS-2403

Page (21) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP09 - PLATING, NICKEL AMS-2424

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP09 - PLATING, SILVER ASTM-B-700

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467



427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP12 - PASSIVATION AMS-2700

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 CP15 - PRE-PENETRANT ETCH AC7108/15

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 HT - STRESS RELIEF AMS-2759/11

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

427 2017-11-30 Hixson Metal Finishing (3174) 829 Production Place Newport Beach CA USA Kara Steging (949) 645-4800 x3467 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 AQS - QUALITY SYSTEM AS 9100

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP01 - COATING, DRY FILM E.S. 6.156

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP01 - COATING, DRY FILM E.S. 6.64

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP01 - COATING, DRY FILM MIL-PRF-46010

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP01 - COATING, PAINT APPLICATION E.S. 6.6

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP07 - IVD, CADMIUM AMS-C-8837

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, CHROME AMS-2460

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, CHROME AMS-QQ-C-320

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, NICKEL AMS-2403

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, NICKEL AMS-2424

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, NICKEL AMS-QQ-N-290

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, NICKEL - Cadmium Diffused E.S. 5.18

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, SILVER AMS-2410

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, TIN AMS-2408

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, TIN ASTM-B-545

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP09 - PLATING, ZINC AMS-2402

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191



428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924



MANG/ZN AMS-2480




428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP12 - PASSIVATION AMS-2700

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 CP12 - PASSIVATION E.S. 6.19

428 2015-06-30 Hohman Plating & Mfg., Inc. (3175) 814 Hillrose Ave. Dayton OH USA April Keister (937) 228-2191 HT - STRESS RELIEF AMS-2759/11

1259 Hoosier Spring Co., Inc (3181) 4604 South Burnett Drive South Bend IN USA Greg Lynch 574-291-7550 AQS - QUALITY SYSTEM AS 9100

1259 Hoosier Spring Co., Inc (3181) 4604 South Burnett Drive South Bend IN USA Greg Lynch 574-291-7550 HT - HEAT TREAT AMS-2759/1



1259 Hoosier Spring Co., Inc (3181) 4604 South Burnett Drive South Bend IN USA Greg Lynch 574-291-7550 HT - HEAT TREAT AMS-2774

1259 Hoosier Spring Co., Inc (3181) 4604 South Burnett Drive South Bend IN USA Greg Lynch 574-291-7550 HT - HEAT TREAT AMS-2801

1259 Hoosier Spring Co., Inc (3181) 4604 South Burnett Drive South Bend IN USA Greg Lynch 574-291-7550 HT - STRESS RELIEF AMS-2759/11

524 HPF S.r.l. (11729) Via Pinzano al. Tagliamento, 24 Street

Flagogna Fraz. di Forgaria nel

Friuli Udine ITALY Marzia Pavanin +39 0427 809811 AQS - QUALITY SYSTEM AS 9100



Friuli Udine ITALY Marzia Pavanin +39 0427 809811 HT - HEAT TREAT AMS-2759



Friuli Udine ITALY Marzia Pavanin +39 0427 809811 HT - HEAT TREAT AMS-2801

414 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) 32 Gay Street Coopers Plains Queensland Australia Jon O'Donnell 011 61 7 3345 4944 AQS - QUALITY SYSTEM AS 9100

414 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) 32 Gay Street Coopers Plains Queensland Australia Jon O'Donnell 011 61 7 3345 4944 HT - HEAT TREAT AMS-2759/1 Limited to gas quenching

414 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) 32 Gay Street Coopers Plains Queensland Australia Jon O'Donnell 011 61 7 3345 4944 HT - HEAT TREAT AMS-2759/2 Limited to gas quenching

414 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) 32 Gay Street Coopers Plains Queensland Australia Jon O'Donnell 011 61 7 3345 4944 HT - HEAT TREAT AMS-2759/3

414 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) 32 Gay Street Coopers Plains Queensland Australia Jon O'Donnell 011 61 7 3345 4944 HT - HEAT TREAT LGPS-2000

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 AQS - QUALITY SYSTEM AS 9100

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 HT - HEAT TREAT AMS-2759/3



421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 HT - HEAT TREAT AMS-5678

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 HT - HEAT TREAT AMS-5737

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 HT - HEAT TREAT AMS-H-6875

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 HT - STRESS RELIEF AMS-2759/11

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 WLD - BRAZING AMS-2665

421 HTG Hi Tech Aero (3196) 34800 LAKELAND BLVD. EASTLAKE OH USA Jason Chernick (440) 946-2280 WLD - BRAZING AMS-2670

129 Hydro Honing D/B/A Peening Tech. of CT (4068) 8 EASTERN PARK RD EAST HARTFORD CT USA WALTER BEACH (860) 289-4328 x208 AQS - QUALITY SYSTEM AC7004

129 Hydro Honing D/B/A Peening Tech. of CT (4068) 8 EASTERN PARK RD EAST HARTFORD CT USA WALTER BEACH (860) 289-4328 x208 SE - MANUAL PEENING AMS-2430

129 Hydro Honing D/B/A Peening Tech. of CT (4068) 8 EASTERN PARK RD EAST HARTFORD CT USA WALTER BEACH (860) 289-4328 x208 SE - SHOT PEEN AMS-2430

129 Hydro Honing D/B/A Peening Tech. of CT (4068) 8 EASTERN PARK RD EAST HARTFORD CT USA WALTER BEACH (860) 289-4328 x208 SE - SHOT PEEN CP-0340

129 Hydro Honing D/B/A Peening Tech. of CT (4068) 8 EASTERN PARK RD EAST HARTFORD CT USA WALTER BEACH (860) 289-4328 x208 SE - SHOT PEEN CPC-6400

1202 Icore International - Mexico (11313) Ave Ischikawa 1000 Chihuahua Chihuahua Mexico Harold Julander (707) 535-2774 WLD - WELDING AWS-D17.1

446 2016-11-30 Icore International, Inc. (5032) 3780 Flightline Drive Santa Rosa CA USA Paul D. Scarfone, Harold Julander (707) 535-2774 AQS - QUALITY SYSTEM AS 9100

446 2016-11-30 Icore International, Inc. (5032) 3780 Flightline Drive Santa Rosa CA USA Paul D. Scarfone, Harold Julander (707) 535-2774 WLD - BRAZING AWS-C3.7

446 2016-11-30 Icore International, Inc. (5032) 3780 Flightline Drive Santa Rosa CA USA Paul D. Scarfone, Harold Julander (707) 535-2774 WLD - WELDING AWS-D17.1

448 2019-06-30 ILCO Industries (5334) 1308 W Mahalo Place Rancho Dominguez CA USA Mahtab Taghipour (310) 631-8655 X104 AQS - QUALITY SYSTEM AS 9100 Welding to BAC5975, on weld assembly PN 160U0102.

448 2019-06-30 ILCO Industries (5334) 1308 W Mahalo Place Rancho Dominguez CA USA Mahtab Taghipour (310) 631-8655 X104 WLD - WELDING AWS-D17.1

1607 Imagineering Finishing Tech Indianapolis (9809) 2719 N. Emerson Ave. Indianapolis IN USA William Fabiano 574-287-2941 AQS - QUALITY SYSTEM AS 9100

1607 Imagineering Finishing Tech Indianapolis (9809) 2719 N. Emerson Ave. Indianapolis IN USA William Fabiano 574-287-2941 CP15 - PRE-PENETRANT ETCH AC7108/15

1607 Imagineering Finishing Tech Indianapolis (9809) 2719 N. Emerson Ave. Indianapolis IN USA William Fabiano 574-287-2941 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1607 Imagineering Finishing Tech Indianapolis (9809) 2719 N. Emerson Ave. Indianapolis IN USA William Fabiano 574-287-2941 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 AQS - QUALITY SYSTEM AS 9100

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP01 - COATING, DRY FILM MIL-L-46010

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

Page (22) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734



449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP12 - PASSIVATION AMS-2700

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP12 - PASSIVATION E.S. 6.19

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP12 - TITANIUM CLEANING ASTM-B-600

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 CP15 - PRE-PENETRANT ETCH AC7108/15

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 HT - STRESS RELIEF AMS-2759/11

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

449 2015-02-28 Imagineering Finishing Technologies (3203) 1302 W. Sample St. South Bend IN USA Bill Fabiano (574) 287-2941 x734 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

818 2018-06-30 Impresa Aerospace, LLC (10372) 344 W.157 St. Gardena CA USA Vicente Flores 310.354.1200 / 310.352.2476 AQS - QUALITY SYSTEM AS 9100

818 2018-06-30 Impresa Aerospace, LLC (10372) 344 W.157 St. Gardena CA USA Vicente Flores 310.354.1200 / 310.352.2476 CP01 - COATING, PAINT APPLICATION MIL-F-18264

818 2018-06-30 Impresa Aerospace, LLC (10372) 344 W.157 St. Gardena CA USA Vicente Flores 310.354.1200 / 310.352.2476

CP08 - ANODIZE ALUMINUM - NON-CHROMIC (TYPE

IC) MIL-A-8625

818 2018-06-30 Impresa Aerospace, LLC (10372) 344 W.157 St. Gardena CA USA Vicente Flores 310.354.1200 / 310.352.2476 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

818 2018-06-30 Impresa Aerospace, LLC (10372) 344 W.157 St. Gardena CA USA Vicente Flores 310.354.1200 / 310.352.2476 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

451 Imtech of California, Inc. 8424 Secura Way Santa Fe Springs CA USA Ken Shonk 562-945-8943 NA - COATING, VACUUM IMPREGNATED CHROME MIL-STD-276

1200 Incertec - Mexico (8902) Edificio 13A Parque Ind'l Bella Vista Empalme Sonora Mexico Martha Miranda 011 52 (622) 22 3-58-51 AQS - QUALITY SYSTEM AS 9100

1200 Incertec - Mexico (8902) Edificio 13A Parque Ind'l Bella Vista Empalme Sonora Mexico Martha Miranda 011 52 (622) 22 3-58-51 CP15 - PRE-PENETRANT ETCH AC7108/15

1200 Incertec - Mexico (8902) Edificio 13A Parque Ind'l Bella Vista Empalme Sonora Mexico Martha Miranda 011 52 (622) 22 3-58-51 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1476 Incotec Corp (5128) 1347 Poole St Mojave CA USA Charlie Humphrey 661-824-8101 ext 326 AQS - QUALITY SYSTEM AS 9100

1476 Incotec Corp (5128) 1347 Poole St Mojave CA USA Charlie Humphrey 661-824-8101 ext 326 CP01 - COATING, DRY FILM MIL-PRF-46010

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 AQS - QUALITY SYSTEM AS 9100

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - MANUAL PEENING AMS-2430

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN AMS-2430

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN BP-105

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN CP-0340

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN CPC-6400

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN MMC-137

1594 2018-10-31 Industrial Metal Finishing (5712) 1941 Petra Lane Placentia CA USA Bob Hayden 714-628-8808 SE - SHOT PEEN PS-1201

944 2019-07-31 Industrial Tectonics Bearings Inc. (4100) 18301 South Santa Fe Ave Rancho Dominguez CA USA Clark Tracey (310) 537-3750 AQS - QUALITY SYSTEM AS 9100

944 2019-07-31 Industrial Tectonics Bearings Inc. (4100) 18301 South Santa Fe Ave Rancho Dominguez CA USA Clark Tracey (310) 537-3750 CP02 - TEMPER ETCH INSPECTION AMS-2649

944 2019-07-31 Industrial Tectonics Bearings Inc. (4100) 18301 South Santa Fe Ave Rancho Dominguez CA USA Clark Tracey (310) 537-3750 HT - HEAT TREAT AMS-2759/1

Includes Boeing PN 68B410069 (2097-57) proprietary PN

19387AS1




944 2019-07-31 Industrial Tectonics Bearings Inc. (4100) 18301 South Santa Fe Ave Rancho Dominguez CA USA Clark Tracey (310) 537-3750 HT - STRESS RELIEF AMS-2759/11

944 2019-07-31 Industrial Tectonics Bearings Inc. (4100) 18301 South Santa Fe Ave Rancho Dominguez CA USA Clark Tracey (310) 537-3750 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

456 2016-04-30 Interface Welding (5594) 20722 Belshaw Avenue Carson CA USA Michael Massey (310) 323-4944 AQS - QUALITY SYSTEM AC7004

Welding PNs 161U2618 (747 brace) and 161N1301 (757 brace)

to BAC5966 as per Boeing's D1-4426.

456 2016-04-30 Interface Welding (5594) 20722 Belshaw Avenue Carson CA USA Michael Massey (310) 323-4944 HT - STRESS RELIEF AMS-2759/11 950°F maximum, for internal use only.

456 2016-04-30 Interface Welding (5594) 20722 Belshaw Avenue Carson CA USA Michael Massey (310) 323-4944 WLD - WELDING LGPS-5002

Welding PNs 1003M2600C001 (GVII-2, G500) and

1006M2600C001 (GVII-3, G600).

456 2016-04-30 Interface Welding (5594) 20722 Belshaw Avenue Carson CA USA Michael Massey (310) 323-4944 WLD - WELDING MIL-STD-1252 Welding PNs 1159LM40585 (GIV) and 1159LM50585 (GV).

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 AQS - QUALITY SYSTEM AC7004

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Type 1C only

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Includes type 2B

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

461 International Hardcoat Inc. (3259) 12400 Burt Road Detroit MI USA Tim Berry (313) 535-3210



468 2018-01-31 J. D. Ott Company, Inc. (4334) 2244 6th Avenue South Seattle WA USA Cliff Adams (206) 749-0777 AQS - QUALITY SYSTEM AS 9100

Heat treat per BAC5619 for stainless steels, internal production

support only.

468 2018-01-31 J. D. Ott Company, Inc. (4334) 2244 6th Avenue South Seattle WA USA Cliff Adams (206) 749-0777 HT - HEAT TREAT AMS-2759/3

1180 2018-02-28 Jet Processing - Div of PCC (3269) 2660 W. Quail Ave. Phoenix AZ USA Kim Ferguson 623-869-6749 x113 AQS - QUALITY SYSTEM AC7004 FPI per BAC5423 and ASTM E1417

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 AQS - QUALITY SYSTEM AC7004

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2472

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251



479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP12 - PASSIVATION AMS-2700

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 CP15 - PRE-PENETRANT ETCH AC7108/15

479 2018-02-28 K&L Anodizing (4908) 1200 S. Victory Blvd. Burbank CA USA Dana Schlumpberger (818) 845-7251 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1077 Kaji Metal LTD. (5400) 2-2-46 Fudomae Utsunomiya Tochigi, Japan Junko Mitsunaga 81-26-636-7011 AQS - QUALITY SYSTEM JISQ9100

1077 Kaji Metal LTD. (5400) 2-2-46 Fudomae Utsunomiya Tochigi, Japan Junko Mitsunaga 81-26-636-7011 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1142 Kaman Aerostructures - Chihuahua (10715) Boulevard Fuentes Mares #9403 Chihuahua Chihuahua Mexico Mario Sigala 011 52 614 3002 AQS - QUALITY SYSTEM AS 9100

1142 Kaman Aerostructures - Chihuahua (10715) Boulevard Fuentes Mares #9403 Chihuahua Chihuahua Mexico Mario Sigala 011 52 614 3002 HT - HEAT TREAT AMS-2770

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 AQS - QUALITY SYSTEM AS 9100

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 CP12 - PASSIVATION AMS-2700

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 CP12 - PASSIVATION ASTM-A-967

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 CP15 - PRE-PENETRANT ETCH AC7108/15

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

482 2015-11-30 Kamatics Corp. (4548) 1330 Blue Hills Ave Bloomfield CT USA Richard Ott (860) 243-9704; QM:860-769-3258 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

956 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) 5 Zavodskaya St. Kamensk Uralsky Sverdlovsk Region Russia Nina Stadnik +7 3439 39 50 75 AQS - QUALITY SYSTEM AS 9100

956 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) 5 Zavodskaya St. Kamensk Uralsky Sverdlovsk Region Russia Nina Stadnik +7 3439 39 50 75 HT - HEAT TREAT AMS-2772

956 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) 5 Zavodskaya St. Kamensk Uralsky Sverdlovsk Region Russia Nina Stadnik +7 3439 39 50 75 HT - HEAT TREAT E.S. 5.14.26

956 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) 5 Zavodskaya St. Kamensk Uralsky Sverdlovsk Region Russia Nina Stadnik +7 3439 39 50 75 NDT - INSPECTION, ULTRASONIC ASTM-B-594

489 KHI GMBH & CO KG - Neckarsulm Im Klauenfuss 3 Neckarsulm Germany Hartmut Plach 0049/7132-96000 AQS - QUALITY SYSTEM ISO9000

490 KHI GmbH & Co.KG Kunstharz Imprägnierung Georg-Ohm-Str. 11 Erlenbach Germany Hartmut Plach 0049/7132-96000 AQS - QUALITY SYSTEM ISO9001

490 KHI GmbH & Co.KG Kunstharz Imprägnierung Georg-Ohm-Str. 11 Erlenbach Germany Hartmut Plach 0049/7132-96000 NA - COATING, VACUUM IMPREGNATED CHROME CPC-8220

490 KHI GmbH & Co.KG Kunstharz Imprägnierung Georg-Ohm-Str. 11 Erlenbach Germany Hartmut Plach 0049/7132-96000 NA - COATING, VACUUM IMPREGNATED CHROME MIL-I-17563

490 KHI GmbH & Co.KG Kunstharz Imprägnierung Georg-Ohm-Str. 11 Erlenbach Germany Hartmut Plach 0049/7132-96000 NA - COATING, VACUUM IMPREGNATED CHROME PS-11501

1564 Kittyhawk Products (6224) 11651 Monarch Street Garden Grove CA USA Steve Belloise 714-895-5024 AQS - QUALITY SYSTEM AS 9100

1564 Kittyhawk Products (6224) 11651 Monarch Street Garden Grove CA USA Steve Belloise 714-895-5024 HT - HOT ISOSTATIC PRESSURE AMS-4991

1564 Kittyhawk Products (6224) 11651 Monarch Street Garden Grove CA USA Steve Belloise 714-895-5024 HT - HOT ISOSTATIC PRESSURE E.S. 13.101




498 Klinge Enameling Company (3287) 5001 E. Prospect Indianapolis IN USA Sheila Shaw 317-359-8291 AQS - QUALITY SYSTEM AS 9100

498 Klinge Enameling Company (3287) 5001 E. Prospect Indianapolis IN USA Sheila Shaw 317-359-8291 CP01 - COATING, PAINT APPLICATION LGPS-1001

498 Klinge Enameling Company (3287) 5001 E. Prospect Indianapolis IN USA Sheila Shaw 317-359-8291 CP01 - COATING, PAINT APPLICATION MIL-F-18264

502 2015-05-31 Kropp Forge (4373) 5301 W.Roosevelt Road Cicero IL USA STEVE BORCIK (708) 652-6643; 708-652-6691 AQS - QUALITY SYSTEM AS 9100

502 2015-05-31 Kropp Forge (4373) 5301 W.Roosevelt Road Cicero IL USA STEVE BORCIK (708) 652-6643; 708-652-6691 HT - HEAT TREAT AMS-H-6875

Page (23) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


502 2015-05-31 Kropp Forge (4373) 5301 W.Roosevelt Road Cicero IL USA STEVE BORCIK (708) 652-6643; 708-652-6691 HT - HEAT TREAT AMS-H-81200

502 2015-05-31 Kropp Forge (4373) 5301 W.Roosevelt Road Cicero IL USA STEVE BORCIK (708) 652-6643; 708-652-6691 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

502 2015-05-31 Kropp Forge (4373) 5301 W.Roosevelt Road Cicero IL USA STEVE BORCIK (708) 652-6643; 708-652-6691 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 AQS - QUALITY SYSTEM AS 9100

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP01 - COATING, DRY FILM MIL-PRF-46010

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP01 - COATING, PAINT APPLICATION MIL-F-18264

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP09 - PLATING, CHROME AMS-2460 TYPE 1 & 2, CLASS 2

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP09 - PLATING, CHROME AMS-QQ-C-320 TYPE 1 & 2, CLASS 2

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 CP12 - PASSIVATION AMS-2700

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 HT - STRESS RELIEF AMS-2759/11

875 degrees F

maximum

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

503 2018-03-31 Kryler Corp. (4377) 1217 E. Ash Avenue Fullerton CA USA Chet Krygier Jr. 714-871-9611 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1448 La Nitruration Moderne SA (7245) Rue Gilles Galler 22-24 4000 Sclessin Liège Belgium Marie-Thérèse MEGIDO CRESPO +32 (0) 4 235 47 20 AQS - QUALITY SYSTEM AS 9100

1448 La Nitruration Moderne SA (7245) Rue Gilles Galler 22-24 4000 Sclessin Liège Belgium Marie-Thérèse MEGIDO CRESPO +32 (0) 4 235 47 20 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1413 2018-03-31 Lake City Heat Treating (3298) 2427 N. Boeing Dr. Warsaw IN USA William Davis 574-269-9484 AQS - QUALITY SYSTEM AC7004

1413 2018-03-31 Lake City Heat Treating (3298) 2427 N. Boeing Dr. Warsaw IN USA William Davis 574-269-9484 HT - HEAT TREAT AMS-2759/3

1413 2018-03-31 Lake City Heat Treating (3298) 2427 N. Boeing Dr. Warsaw IN USA William Davis 574-269-9484 HT - HEAT TREAT AMS-5659

1413 2018-03-31 Lake City Heat Treating (3298) 2427 N. Boeing Dr. Warsaw IN USA William Davis 574-269-9484 HT - HEAT TREAT AMS-H-6875

1413 2018-03-31 Lake City Heat Treating (3298) 2427 N. Boeing Dr. Warsaw IN USA William Davis 574-269-9484 HT - HEAT TREAT S.S. 30.13

521 Liberty Inspection (4226) 67 W. Easy St., #2-109 Simi Valley CA USA Edward Dunn (805) 584-2369 AQS - QUALITY SYSTEM AC7004

521 Liberty Inspection (4226) 67 W. Easy St., #2-109 Simi Valley CA USA Edward Dunn (805) 584-2369 CP12 - PASSIVATION ASTM-A-967

521 Liberty Inspection (4226) 67 W. Easy St., #2-109 Simi Valley CA USA Edward Dunn (805) 584-2369 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

521 Liberty Inspection (4226) 67 W. Easy St., #2-109 Simi Valley CA USA Edward Dunn (805) 584-2369 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

521 Liberty Inspection (4226) 67 W. Easy St., #2-109 Simi Valley CA USA Edward Dunn (805) 584-2369 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1370 Lite Metals Company (5525) 700 N WALNUT ST Ravenna OH USA Mike Sparrow 330-296-6110 AQS - QUALITY SYSTEM AS 9100

1370 Lite Metals Company (5525) 700 N WALNUT ST Ravenna OH USA Mike Sparrow 330-296-6110 HT - HEAT TREAT AMS-2768

1370 Lite Metals Company (5525) 700 N WALNUT ST Ravenna OH USA Mike Sparrow 330-296-6110 HT - HEAT TREAT AMS-2771

1370 Lite Metals Company (5525) 700 N WALNUT ST Ravenna OH USA Mike Sparrow 330-296-6110 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1370 Lite Metals Company (5525) 700 N WALNUT ST Ravenna OH USA Mike Sparrow 330-296-6110 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

531 2018-04-30 Lubeco, Inc. (3479) 6859 Downey Ave. Long Beach CA USA Charles Hawkins (562) 602-1791 AQS - QUALITY SYSTEM AC7004

531 2018-04-30 Lubeco, Inc. (3479) 6859 Downey Ave. Long Beach CA USA Charles Hawkins (562) 602-1791 CP01 - COATING, DRY FILM MM-1920 Approved to process to MM1920-2 for p/n 2006014-1.

531 2018-04-30 Lubeco, Inc. (3479) 6859 Downey Ave. Long Beach CA USA Charles Hawkins (562) 602-1791



1159 M/s Therelek Engineers Private Limited (5999) 70-71 III Phase Peenya Industrial Area Bangalore Karnataka India C.R.R Nair +91-802839510 AQS - QUALITY SYSTEM AS 9100

1159 M/s Therelek Engineers Private Limited (5999) 70-71 III Phase Peenya Industrial Area Bangalore Karnataka India C.R.R Nair +91-802839510 HT - HEAT TREAT AMS-2759

1159 M/s Therelek Engineers Private Limited (5999) 70-71 III Phase Peenya Industrial Area Bangalore Karnataka India C.R.R Nair +91-802839510 HT - HEAT TREAT AMS-2759/1






1159 M/s Therelek Engineers Private Limited (5999) 70-71 III Phase Peenya Industrial Area Bangalore Karnataka India C.R.R Nair +91-802839510 HT - HEAT TREAT AMS-2770

1159 M/s Therelek Engineers Private Limited (5999) 70-71 III Phase Peenya Industrial Area Bangalore Karnataka India C.R.R Nair +91-802839510 HT - HEAT TREAT E.S. 5.14.2

492 Magellan Aerospace (Polska) (8232) Wojska Polskiego 3 Mielec Podkarpacie Poland Wojciech Przetacznik +48 17 773 89 64 AQS - QUALITY SYSTEM AS 9100

492 Magellan Aerospace (Polska) (8232) Wojska Polskiego 3 Mielec Podkarpacie Poland Wojciech Przetacznik +48 17 773 89 64 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Not approved for LGPS1100

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 AQS - QUALITY SYSTEM AS 9100

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, DRY FILM CP-0420

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, DRY FILM MIL-L-23398

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, DRY FILM MIL-PRF-46010

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, DRY FILM P-1011

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, PAINT APPLICATION BR-167

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, PAINT APPLICATION LGPS-1001

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP01 - COATING, PAINT APPLICATION MIL-F-18264

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP02 - TEMPER ETCH INSPECTION LGPS-3000

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM (BRIGHT/LHE) CP-0440

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM (BRIGHT/LHE) CP-0480

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP09 - PLATING, ZINC NICKEL LGPS-1106

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP12 - PASSIVATION AMS-2700

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP12 - PASSIVATION ASTM-A-380

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP12 - PASSIVATION ASTM-A-967

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP12 - TITANIUM CLEANING LGPS-8003

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 CP15 - PRE-PENETRANT ETCH AC7108/15

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 HT - STRESS RELIEF AMS-2759/1 Stress relief only




510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 SE - MANUAL PEENING AMS-2430

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 SE - SHOT PEEN AMS-2430

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 SE - SHOT PEEN BP-105

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 SE - SHOT PEEN CPC-6400

510 2019-01-31 Magellan Aerospace Processing - New York (4250) 165 Field Street West Babylon NY USA Gerardo Patino (631) 694-1818 x233 SE - SHOT PEEN PS-1201

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 AQS - QUALITY SYSTEM AC7004

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP01 - COATING, PAINT APPLICATION MIL-F-18264

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - PASSIVATION AMS-2700

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - PASSIVATION ASTM-A-380

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - PASSIVATION ASTM-A-967

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - TITANIUM CLEANING ASTM-B-600

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - TITANIUM CLEANING LGPS-8003

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP12 - TITANIUM CLEANING MIL-S-5002

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 CP15 - PRE-PENETRANT ETCH AC7108/15

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

Page (24) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


536 2017-07-31 Magnetic and Penetrant Services Company (4200) 8135 1st. Ave. South Seattle WA USA Rick Reese (206) 762-5855 SE - SHOT PEEN AMS-2430

1064 2015-10-31 Magnetic Inspection Laboratory, Inc. - Annex (10392) 1225 Greenleaf Ave. Elk Grove Village IL USA Annie Gandhi (847) 437-4488 AQS - QUALITY SYSTEM AS 9100

1064 2015-10-31 Magnetic Inspection Laboratory, Inc. - Annex (10392) 1225 Greenleaf Ave. Elk Grove Village IL USA Annie Gandhi (847) 437-4488 CP01 - COATING, DRY FILM CP-0420

1064 2015-10-31 Magnetic Inspection Laboratory, Inc. - Annex (10392) 1225 Greenleaf Ave. Elk Grove Village IL USA Annie Gandhi (847) 437-4488 CP01 - COATING, DRY FILM MIL-PRF-46010

1064 2015-10-31 Magnetic Inspection Laboratory, Inc. - Annex (10392) 1225 Greenleaf Ave. Elk Grove Village IL USA Annie Gandhi (847) 437-4488 CP01 - COATING, PAINT APPLICATION MIL-F-18264

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 AQS - QUALITY SYSTEM AS 9100

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP01 - COATING, DRY FILM AS-5272

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP05 - CHEMICAL MILLING AMS-C-81769

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP05 - CHEMICAL MILLING CPC-8224

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP05 - CHEMICAL MILLING MM-5527

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488



537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP12 - PASSIVATION AMS-2700

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP12 - PASSIVATION ASTM-A-967

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP12 - PASSIVATION CP-0520

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP12 - PASSIVATION E.S. 6.19

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 CP15 - PRE-PENETRANT ETCH AC7108/15

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 HT - STRESS RELIEF AMS-2759/9 Up to 750°F only.

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

537 2015-10-31 Magnetic Inspection Laboratory, Inc. (3487) 1401 Greenleaf Ave. Elk Grove Village IL USA Thomas Hackler (847) 437-4488 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1560 Manufacturing Technology, Inc. (5530) 402 N. Sheridan Ave. South Bend IN USA James Hoffman (574) 233-9490 AQS - QUALITY SYSTEM AS 9100

1560 Manufacturing Technology, Inc. (5530) 402 N. Sheridan Ave. South Bend IN USA James Hoffman (574) 233-9490 HT - STRESS RELIEF AMS-2759/11 Post weld stress relief up to 600 deg F max

1560 Manufacturing Technology, Inc. (5530) 402 N. Sheridan Ave. South Bend IN USA James Hoffman (574) 233-9490 WLD - WELDING CPC-5306

1560 Manufacturing Technology, Inc. (5530) 402 N. Sheridan Ave. South Bend IN USA James Hoffman (574) 233-9490 WLD - WELDING LGPS-5002

1560 Manufacturing Technology, Inc. (5530) 402 N. Sheridan Ave. South Bend IN USA James Hoffman (574) 233-9490 WLD - WELDING MIL-STD-1252

1074

MB Aerospace Technologies (Poland) Sp. Z o.o. plant No 2 Rzeszow

(10907) Tajecina 114 Jasionka Sub Carpation Poland Justyna Zajac

+48 17 7713981

+48 17 7713 981 AQS - QUALITY SYSTEM AS 9100

1074



+48 17 7713981

+48 17 7713 981 HT - HEAT TREAT AMS-2759/2

1074



+48 17 7713981

+48 17 7713 981 HT - HEAT TREAT AMS-2759/3

555 2016-09-07 Mecaer America Inc. (12134) 5555 William - Price Lavak Quebec Canada Jean-Luc Rioux 450-682-7117 x225 AQS - QUALITY SYSTEM AS 9100

555 2016-09-07 Mecaer America Inc. (12134) 5555 William - Price Lavak Quebec Canada Jean-Luc Rioux 450-682-7117 x225 CMSP - GRINDING, CHROME LGPS-7000

555 2016-09-07 Mecaer America Inc. (12134) 5555 William - Price Lavak Quebec Canada Jean-Luc Rioux 450-682-7117 x225 CMSP - GRINDING, HVOF LGPS-7010

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 AQS - QUALITY SYSTEM AS 9100

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 HT - HEAT TREAT AMS-2770

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 HT - HEAT TREAT AMS-2772

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

556 Mecaer Aviation Group S.p.A. (10206) Via per ARONA 46 BORGOMANERO Novara ITALY Emanuele Bertoni +39 0322837916 SE - SHOT PEEN AMS-2430

1266 Mecaero SNC (3821) BD DU GRAND CASTAING Portet sur Garonne (Haute) Toulouse France Gregoire Aguilar +33561518237 AQS - QUALITY SYSTEM AS 9100

1266 Mecaero SNC (3821) BD DU GRAND CASTAING Portet sur Garonne (Haute) Toulouse France Gregoire Aguilar +33561518237 CP12 - PASSIVATION AMS-2700

1266 Mecaero SNC (3821) BD DU GRAND CASTAING Portet sur Garonne (Haute) Toulouse France Gregoire Aguilar +33561518237 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

560 2016-03-31 Merrill Aviation Inc. (10259) 1023 S. Wheeler St. Saginaw MI USA Randy Sonefeld

989-921-4005 x5001;989-791-

6676 x5004 AQS - QUALITY SYSTEM AS 9100


989-921-4005 x5001;989-791-

6676 x5004 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site


989-921-4005 x5001;989-791-

6676 x5004 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444


989-921-4005 x5001;989-791-

6676 x5004 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108


989-921-4005 x5001;989-791-

6676 x5004 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 AQS - QUALITY SYSTEM AC7004

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 CP01 - COATING, PAINT APPLICATION LGPS-1001

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 CP15 - PRE-PENETRANT ETCH AC7108/15

1140 Metal Finishing Co. - Chihuahua (10847) Nicolas Gogol #11332 Chihuahua Chihuahua Mexico Levi Talamantes 011 52 614 483-1317 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

564 2016-01-31 Metal Improvement Co. - Addison (5455) 678 WINTHROP AVE. ADDISON IL USA Richard Rudin (630) 543-4950 AQS - QUALITY SYSTEM AC7004

564 2016-01-31 Metal Improvement Co. - Addison (5455) 678 WINTHROP AVE. ADDISON IL USA Richard Rudin (630) 543-4950 SE - SHOT PEEN AMS-2430

564 2016-01-31 Metal Improvement Co. - Addison (5455) 678 WINTHROP AVE. ADDISON IL USA Richard Rudin (630) 543-4950 SE - SHOT PEEN CPC-6400

564 2016-01-31 Metal Improvement Co. - Addison (5455) 678 WINTHROP AVE. ADDISON IL USA Richard Rudin (630) 543-4950 SE - SHOT PEEN E.S 5.30

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 AQS - QUALITY SYSTEM AS 9100

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 SE - MANUAL PEENING AMS-2430

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 SE - SHOT PEEN AMS-2430

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 SE - SHOT PEEN AMS-2432

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 SE - SHOT PEEN CPC-6400

567 2016-01-31 METAL IMPROVEMENT CO. - Blue Ash (4724) 11131 LUSCHEK DRIVE BLUE ASH OH USA Brian Brown (513) 489-6484 SE - SHOT PEEN E.S. 5.30

568 2016-04-13 Metal Improvement Co. - Brampton (5532) 105 Alfred Kuehne Blvd. Brampton Ontario Canada Millie Feria (905) 791-8002 AQS - QUALITY SYSTEM AS 9100

568 2016-04-13 Metal Improvement Co. - Brampton (5532) 105 Alfred Kuehne Blvd. Brampton Ontario Canada Millie Feria (905) 791-8002 SE - MANUAL PEENING AMS-2430

568 2016-04-13 Metal Improvement Co. - Brampton (5532) 105 Alfred Kuehne Blvd. Brampton Ontario Canada Millie Feria (905) 791-8002 SE - SHOT PEEN AMS-2430

568 2016-04-13 Metal Improvement Co. - Brampton (5532) 105 Alfred Kuehne Blvd. Brampton Ontario Canada Millie Feria (905) 791-8002 SE - SHOT PEEN CPC-6400

568 2016-04-13 Metal Improvement Co. - Brampton (5532) 105 Alfred Kuehne Blvd. Brampton Ontario Canada Millie Feria (905) 791-8002 SE - SHOT PEEN MMC-137

1151 METAL IMPROVEMENT CO. - Feuchtwangen (6727) Sommerauer Strasse 6 Feuchtwangen Germany Ralf Plesken + 49/(0)2303-9188-18 AQS - QUALITY SYSTEM AS 9100

This source was added to perform shotpeen to the BAC 5730

specification only.

570 2017-01-31 Metal Improvement Co. - Grand Prairie (5535) 1450 Avenue S Grand Prairie TX USA Jose Cruz (972) 641-8011 AQS - QUALITY SYSTEM AS 9100

570 2017-01-31 Metal Improvement Co. - Grand Prairie (5535) 1450 Avenue S Grand Prairie TX USA Jose Cruz (972) 641-8011 SE - MANUAL PEENING AMS-2430

570 2017-01-31 Metal Improvement Co. - Grand Prairie (5535) 1450 Avenue S Grand Prairie TX USA Jose Cruz (972) 641-8011 SE - SHOT PEEN AMS-2430

570 2017-01-31 Metal Improvement Co. - Grand Prairie (5535) 1450 Avenue S Grand Prairie TX USA Jose Cruz (972) 641-8011 SE - SHOT PEEN CP-0340

570 2017-01-31 Metal Improvement Co. - Grand Prairie (5535) 1450 Avenue S Grand Prairie TX USA Jose Cruz (972) 641-8011 SE - SHOT PEEN CPC-6400

573 2017-01-31 Metal Improvement Co. - Phoenix (4834) 103 S. 41st Ave. Phoenix AZ USA Brian Dodge (602) 278-2811 AQS - QUALITY SYSTEM AC7004

573 2017-01-31 Metal Improvement Co. - Phoenix (4834) 103 S. 41st Ave. Phoenix AZ USA Brian Dodge (602) 278-2811 SE - MANUAL PEENING AMS-2430

573 2017-01-31 Metal Improvement Co. - Phoenix (4834) 103 S. 41st Ave. Phoenix AZ USA Brian Dodge (602) 278-2811 SE - SHOT PEEN AMS-2430

573 2017-01-31 Metal Improvement Co. - Phoenix (4834) 103 S. 41st Ave. Phoenix AZ USA Brian Dodge (602) 278-2811 SE - SHOT PEEN AMS-2432

574 2016-01-31 Metal improvement Co. - Romulus (5013) 30100 CYPRESS ROMULUS MI USA Rick Siler (734) 728-8600 AQS - QUALITY SYSTEM AC7004

574 2016-01-31 Metal improvement Co. - Romulus (5013) 30100 CYPRESS ROMULUS MI USA Rick Siler (734) 728-8600 SE - SHOT PEEN AMS-2430

574 2016-01-31 Metal improvement Co. - Romulus (5013) 30100 CYPRESS ROMULUS MI USA Rick Siler (734) 728-8600 SE - SHOT PEEN BP-105

Page (25) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


574 2016-01-31 Metal improvement Co. - Romulus (5013) 30100 CYPRESS ROMULUS MI USA Rick Siler (734) 728-8600 SE - SHOT PEEN CP-0340

574 2016-01-31 Metal improvement Co. - Romulus (5013) 30100 CYPRESS ROMULUS MI USA Rick Siler (734) 728-8600 SE - SHOT PEEN CPC-6400

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 AQS - QUALITY SYSTEM AS 9100

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 SE - MANUAL PEENING AMS-2430

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 SE - MANUAL PEENING LGPS-1501

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 SE - SHOT PEEN AMS-2430

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 SE - SHOT PEEN BP-105

576 2018-01-31 METAL IMPROVEMENT CO. - Twinsburg (5229) 1652 E. HIGHLAND RD. TWINSBURG OH USA JEREMY LINAMEN (330) 425-1490 SE - SHOT PEEN CPC-6400

1604 2019-01-31 Metal Improvement Co. - Windsor (4852) 145 Addison Road Windsor CT USA Cesar Gonzales (860) 688-6201 AQS - QUALITY SYSTEM AC7004

1604 2019-01-31 Metal Improvement Co. - Windsor (4852) 145 Addison Road Windsor CT USA Cesar Gonzales (860) 688-6201 SE - SHOT PEEN AMS-2430

579 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SCHURHOVENVELD 4056 ST TRUIDEN BELGIUM EDDY HUYBRECHTS 0032-11-696512 AQS - QUALITY SYSTEM AS 9100

579 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SCHURHOVENVELD 4056 ST TRUIDEN BELGIUM EDDY HUYBRECHTS 0032-11-696512 SE - MANUAL PEENING AMS-2430

579 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SCHURHOVENVELD 4056 ST TRUIDEN BELGIUM EDDY HUYBRECHTS 0032-11-696512 SE - MANUAL PEENING LGPS-1501

579 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SCHURHOVENVELD 4056 ST TRUIDEN BELGIUM EDDY HUYBRECHTS 0032-11-696512 SE - SHOT PEEN AMS-2430

579 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SCHURHOVENVELD 4056 ST TRUIDEN BELGIUM EDDY HUYBRECHTS 0032-11-696512 SE - SHOT PEEN MMC-137

1137 Metal Spray Concepts (10719) 109 Midland Drive Cuba MO USA Brian Worsley 573-885-3881 AQS - QUALITY SYSTEM AS 9100 Shot peen only

1137 Metal Spray Concepts (10719) 109 Midland Drive Cuba MO USA Brian Worsley 573-885-3881 SE - MANUAL PEENING AMS-2430

1137 Metal Spray Concepts (10719) 109 Midland Drive Cuba MO USA Brian Worsley 573-885-3881 SE - SHOT PEEN AMS-2430

580 2018-10-31 Metal Surfaces Inc. (3501) 6060 Shull St. Bell Gardens CA USA Adam Hammond (213) 927-1331 AQS - QUALITY SYSTEM AS 9100

Approved to nickel plate to BAC5746 in accordance with D1-4426

limitations.

580 2018-10-31 Metal Surfaces Inc. (3501) 6060 Shull St. Bell Gardens CA USA Adam Hammond (213) 927-1331 CP09 - PLATING, NICKEL AMS-2403

580 2018-10-31 Metal Surfaces Inc. (3501) 6060 Shull St. Bell Gardens CA USA Adam Hammond (213) 927-1331 CP09 - PLATING, ZINC NICKEL AMS-2417

494 Metal Technology Co Ltd. - Kinzoku Giken (5394) 1066 Matsuoji Aishou-Chou Echi-gun Shiga-Ken Japan Fumiyoshi Kimura 81-0749-37-3361 AQS - QUALITY SYSTEM JISQ9100

494 Metal Technology Co Ltd. - Kinzoku Giken (5394) 1066 Matsuoji Aishou-Chou Echi-gun Shiga-Ken Japan Fumiyoshi Kimura 81-0749-37-3361 HT - HEAT TREAT AMS-2759/3

610 Metallurgical Processing, Inc. (3504) 68 Arthur St. New Britain CT USA STUART SHERMAN (860) 224-2648 AQS - QUALITY SYSTEM AS 9100

610 Metallurgical Processing, Inc. (3504) 68 Arthur St. New Britain CT USA STUART SHERMAN (860) 224-2648 HT - HEAT TREAT AMS-2759/1






610 Metallurgical Processing, Inc. (3504) 68 Arthur St. New Britain CT USA STUART SHERMAN (860) 224-2648 HT - HEAT TREAT AMS-H-6875

610 Metallurgical Processing, Inc. (3504) 68 Arthur St. New Britain CT USA STUART SHERMAN (860) 224-2648 HT - STRESS RELIEF AMS-2759/11

1361 Metaltek Industries Inc 829 PAULINE ST BLDG #7 Springfield OH USA Ron Wood 937-323-4933 NA - COATING, VACUUM IMPREGNATED CHROME E.S. 6.30

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 AQS - QUALITY SYSTEM AS 9100

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-2753

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-2759

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-2759/1






583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-H-6875

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-H-7199

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT AMS-S-6090

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT CPC-6201



583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT MIL-H-7199

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT MM-5744

583 2015-11-02 Metcor Inc. (4781) 560 Boulevard Arthur-Sauve Saint-Eustache Quebec Canada Costin-Sorin Ionescu (450) 473-1884 HT - HEAT TREAT MMC-207

587 Met-L-Test Laboratory, Inc. (3497) 115 Browning St. STRATFORD CT USA Leonard Adams (203)377-2429 AQS - QUALITY SYSTEM AC7004

587 Met-L-Test Laboratory, Inc. (3497) 115 Browning St. STRATFORD CT USA Leonard Adams (203)377-2429 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

587 Met-L-Test Laboratory, Inc. (3497) 115 Browning St. STRATFORD CT USA Leonard Adams (203)377-2429 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

587 Met-L-Test Laboratory, Inc. (3497) 115 Browning St. STRATFORD CT USA Leonard Adams (203)377-2429 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

587 Met-L-Test Laboratory, Inc. (3497) 115 Browning St. STRATFORD CT USA Leonard Adams (203)377-2429 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1605 Micro-Tronics Inc. (7061) 2905 S. Potter Dr. Tempe AZ USA Jeffrey J. Kupis 437-8995 Ext. 110 AQS - QUALITY SYSTEM AS 9100

1605 Micro-Tronics Inc. (7061) 2905 S. Potter Dr. Tempe AZ USA Jeffrey J. Kupis 437-8995 Ext. 110 NM - EDM (Electro Discharge Machining) N/A As per contractual and engineering drawing requirements.

1228 Mikron Muhendislik Ltd.Sti. (7381) Agac Isleri Sanayi Sitesi 1376.Sok No:28 Ankara Turkey Didem Ozmen 00903123944787 AQS - QUALITY SYSTEM AS 9100 Processing to Boeing specifications per D1-4426

600 MinebeaMitsumi Inc. - Fujisawa (5406) 1-1-1 Katase Fujisawa-Shi Kanagawa Japan Takanori Miyanaga : 0466-23-2316 AQS - QUALITY SYSTEM JISQ9100

600 MinebeaMitsumi Inc. - Fujisawa (5406) 1-1-1 Katase Fujisawa-Shi Kanagawa Japan Takanori Miyanaga : 0466-23-2316 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

600 MinebeaMitsumi Inc. - Fujisawa (5406) 1-1-1 Katase Fujisawa-Shi Kanagawa Japan Takanori Miyanaga : 0466-23-2316 HT - HEAT TREAT AMS-2759/3

600 MinebeaMitsumi Inc. - Fujisawa (5406) 1-1-1 Katase Fujisawa-Shi Kanagawa Japan Takanori Miyanaga : 0466-23-2316 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

601 MinebeaMitsumi Inc. - Nagano (5405) 4106-73 Oaza Miyota Miyota-Machi Kitasaku-Gun Nagano Japan Toshiki Kasai 81-0267-31-1268 AQS - QUALITY SYSTEM JISQ9100

601 MinebeaMitsumi Inc. - Nagano (5405) 4106-73 Oaza Miyota Miyota-Machi Kitasaku-Gun Nagano Japan Toshiki Kasai 81-0267-31-1268 CP12 - PASSIVATION AMS-2700

601 MinebeaMitsumi Inc. - Nagano (5405) 4106-73 Oaza Miyota Miyota-Machi Kitasaku-Gun Nagano Japan Toshiki Kasai 81-0267-31-1268 HT - HEAT TREAT AMS-2759/3

601 MinebeaMitsumi Inc. - Nagano (5405) 4106-73 Oaza Miyota Miyota-Machi Kitasaku-Gun Nagano Japan Toshiki Kasai 81-0267-31-1268 HT - HEAT TREAT AMS-2759/5

601 MinebeaMitsumi Inc. - Nagano (5405) 4106-73 Oaza Miyota Miyota-Machi Kitasaku-Gun Nagano Japan Toshiki Kasai 81-0267-31-1268 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 AQS - QUALITY SYSTEM AC7004

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 CP12 - PASSIVATION AMS-2700

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 CP12 - PASSIVATION ASTM-A-967

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 CP15 - PRE-PENETRANT ETCH AC7108/15

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

364 2019-03-31 Mistras Services - Cudahy (3144) 8427 Atlantic Avenue Cudahy CA USA Greg Bolduc (323) 583-1653 NDT - INSPECTION, ULTRASONIC CPC-9104

654 2015-01-13 Mistras Services Inc (3242) 915 St. Charles St. Lambert Qquebec Canada Dave Hughes (450) 671-0220 AQS - QUALITY SYSTEM AS 9100

654 2015-01-13 Mistras Services Inc (3242) 915 St. Charles St. Lambert Qquebec Canada Dave Hughes (450) 671-0220 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

654 2015-01-13 Mistras Services Inc (3242) 915 St. Charles St. Lambert Qquebec Canada Dave Hughes (450) 671-0220 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

654 2015-01-13 Mistras Services Inc (3242) 915 St. Charles St. Lambert Qquebec Canada Dave Hughes (450) 671-0220 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

654 2015-01-13 Mistras Services Inc (3242) 915 St. Charles St. Lambert Qquebec Canada Dave Hughes (450) 671-0220 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 AQS - QUALITY SYSTEM AS 9100

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, ULTRASONIC CPC-9104

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - INSPECTION, ULTRASONIC MM-5513

603 2019-03-31 Mitchell Laboratories (3214) 7707 Bequette St. Pico-Rivera CA USA David Gray (562) 949-6144 NDT - PRE-PENETRANT ETCH AC7108/15

1459 Modern Forge Indiana, LLC (8587) 8757 Colorado St. Merrillville IN USA Brian Yazumbek 219-945-5945 AQS - QUALITY SYSTEM AS 9100

1459 Modern Forge Indiana, LLC (8587) 8757 Colorado St. Merrillville IN USA Brian Yazumbek 219-945-5945 HT - HEAT TREAT AMS-H-6875 Excludes quenching

1459 Modern Forge Indiana, LLC (8587) 8757 Colorado St. Merrillville IN USA Brian Yazumbek 219-945-5945 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

1097 2017-10-31 Modern Industries, Inc. - Erie (4319) 613 W. 11th Street Erie PA USA Aaron White 814-455-8061 x261 AQS - QUALITY SYSTEM AC7004

1097 2017-10-31 Modern Industries, Inc. - Erie (4319) 613 W. 11th Street Erie PA USA Aaron White 814-455-8061 x261 HT - HEAT TREAT AMS-2759/1






1097 2017-10-31 Modern Industries, Inc. - Erie (4319) 613 W. 11th Street Erie PA USA Aaron White 814-455-8061 x261 HT - HEAT TREAT AMS-2770

1097 2017-10-31 Modern Industries, Inc. - Erie (4319) 613 W. 11th Street Erie PA USA Aaron White 814-455-8061 x261 HT - HEAT TREAT AMS-H-6875

1619 Modern Metal Finishing Inc (8492) 110 Willenbrock Rd. Oxford CT USA Maureen Lorenz (203) 267-1510 AQS - QUALITY SYSTEM AC7004

Page (26) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1619 Modern Metal Finishing Inc (8492) 110 Willenbrock Rd. Oxford CT USA Maureen Lorenz (203) 267-1510 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1477 Nasmyth TMF, Inc (4483) 29102 Hancock Parkway Valancia CA USA Jason Geimer 818-954-9504 AQS - QUALITY SYSTEM AC7004

1477 Nasmyth TMF, Inc (4483) 29102 Hancock Parkway Valancia CA USA Jason Geimer 818-954-9504 CP01 - COATING, PAINT APPLICATION MIL-F-18264

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 AQS - QUALITY SYSTEM AC7004

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, CHROME AMS-2406

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, CHROME AMS-2460

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, CHROME AMS-QQ-C-320

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, COPPER AMS-2418 Limited to mask for HT decab only.

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, NICKEL AMS-2403

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, NICKEL AMS-2424

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, NICKEL AMS-QQ-N-290

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP09 - PLATING, THIN DENSE CHROME AMS-2438

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666



616 2018-11-30 Nassau Chrome Plating (4972) 112-122 2nd. St. Mineola NY USA Kaycee Martimucci (516) 746-6666 CP12 - PASSIVATION AMS-2700

620 National Peening - NC (4447) 1902 Weinig St. Statesville NC USA Charles E. Anastas (704) 872-0113 AQS - QUALITY SYSTEM AC7004

620 National Peening - NC (4447) 1902 Weinig St. Statesville NC USA Charles E. Anastas (704) 872-0113 SE - SHOT PEEN AMS-2430 Not approved on Boeing D1-4426

1600 2018-07-31 National Peening - OH (11488) 23800 Corbin Dr. Bedford Heights OH USA Cindy Godfrey 216-342-9154 AQS - QUALITY SYSTEM AC7004

1600 2018-07-31 National Peening - OH (11488) 23800 Corbin Dr. Bedford Heights OH USA Cindy Godfrey 216-342-9154 SE - MANUAL PEENING AMS-2430

1600 2018-07-31 National Peening - OH (11488) 23800 Corbin Dr. Bedford Heights OH USA Cindy Godfrey 216-342-9154 SE - SHOT PEEN AMS-2430

621 National Process Industries (5091) 42250 Baldaray Cir Temecula CA USA Amber Lawrence (951) 676-0343 AQS - QUALITY SYSTEM AC7004

621 National Process Industries (5091) 42250 Baldaray Cir Temecula CA USA Amber Lawrence (951) 676-0343 CP01 - COATING, DRY FILM MIL-PRF-46010

1353 2019-02-28 National Rivet & Mfg Co 21 E JEFFERSON ST Waupun WI USA Liz Busch 920-324-5511 x290 CP12 - PASSIVATION AMS-2700 Type 6 and 8 only, for in-house use on rivets only.

1353 2019-02-28 National Rivet & Mfg Co 21 E JEFFERSON ST Waupun WI USA Liz Busch 920-324-5511 x290 HT - HEAT TREAT AMS-2759/4 Solution anneal 305 and 347 rivets only

1353 2019-02-28 National Rivet & Mfg Co 21 E JEFFERSON ST Waupun WI USA Liz Busch 920-324-5511 x290 HT - HEAT TREAT AMS-H-6875 Solution anneal 305 and 347 rivets only

1353 2019-02-28 National Rivet & Mfg Co 21 E JEFFERSON ST Waupun WI USA Liz Busch 920-324-5511 x290 HT - STRESS RELIEF AMS-2759/11 In-house use only.

1353 2019-02-28 National Rivet & Mfg Co 21 E JEFFERSON ST Waupun WI USA Liz Busch 920-324-5511 x290 HT - STRESS RELIEF AS-7235

623 2017-02-28 National Shot Peening Inc. (4558) 1020 B. East Columbia Weatherford TX USA Rick Cummins (817) 594-1472 AQS - QUALITY SYSTEM AC7004

623 2017-02-28 National Shot Peening Inc. (4558) 1020 B. East Columbia Weatherford TX USA Rick Cummins (817) 594-1472 SE - MANUAL PEENING AMS-2430

623 2017-02-28 National Shot Peening Inc. (4558) 1020 B. East Columbia Weatherford TX USA Rick Cummins (817) 594-1472 SE - SHOT PEEN AMS-2430

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 AQS - QUALITY SYSTEM AC7004

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

628 2018-01-31 NDE, Inc. (3224) 1189 Mercedes St. Benbrook TX USA Wes Strickland (817) 249-4760 NDT - INSPECTION, ULTRASONIC CPC-9104

629 2016-02-28 Nelson-Miller Inc. (5451) 2800 Casitas Ave. Los Angeles CA USA Sandra Garcia; Maria Batres (323) 663-3971 AQS - QUALITY SYSTEM AS 9100

629 2016-02-28 Nelson-Miller Inc. (5451) 2800 Casitas Ave. Los Angeles CA USA Sandra Garcia; Maria Batres (323) 663-3971 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

1478 Nevada Heat Treating (6373) 12 Industrial Parkway Unit C Carson City NV USA Michael Mohorich 775-246-1040 AQS - QUALITY SYSTEM AS 9100

1478 Nevada Heat Treating (6373) 12 Industrial Parkway Unit C Carson City NV USA Michael Mohorich 775-246-1040 HT - HEAT TREAT AMS-2759/1





1478 Nevada Heat Treating (6373) 12 Industrial Parkway Unit C Carson City NV USA Michael Mohorich 775-246-1040 HT - HEAT TREAT AMS-H-6875

630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 AQS - QUALITY SYSTEM AS 9100

630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 HT - HEAT TREAT AMS-2759/1




630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 HT - HEAT TREAT AMS-2770

630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on site

630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

630 2015-05-31 New Hampshire Ball Bearings Inc (3229) 155 Lexington Rd. Laconia NH USA Bob Hammond (603) 524-0004 ,QM: x6251 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

631 2018-10-31 Newton Heat Treating Co. (4179) 19235 E Walnut Drive N City Of Industry CA USA Miquel Zaragoza (626) 964-6528 AQS - QUALITY SYSTEM AS 9100

631 2018-10-31 Newton Heat Treating Co. (4179) 19235 E Walnut Drive N City Of Industry CA USA Miquel Zaragoza (626) 964-6528 HT - HEAT TREAT AMS-2770



631 2018-10-31 Newton Heat Treating Co. (4179) 19235 E Walnut Drive N City Of Industry CA USA Miquel Zaragoza (626) 964-6528 HT - HEAT TREAT AMS-H-6088

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 AQS - QUALITY SYSTEM JISQ9100

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 HT - HEAT TREAT AMS-2771

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 WLD - WELDING AMS-2694

635 Nippon Precision Casting Corp. (5418) 1/5 Mihadadai Chonancho Chouseigun Chiba-Pref. 2970143 Japan Yasuo Shigematsu 81-(0475)-46-1916 WLD - WELDING AWS-D17.1

1218

Nitrex Metal Technologies – A Division of Bodycote Heat Treatment

Canada Inc. (8772) 4211 Mainway Burlington Ontario Canada Dave Lindey 905-319-9258 AQS - QUALITY SYSTEM AC7004

1218


Canada Inc. (8772) 4211 Mainway Burlington Ontario Canada Dave Lindey 905-319-9258 HT - HEAT TREAT AMS-2759/10

1218


Canada Inc. (8772) 4211 Mainway Burlington Ontario Canada Dave Lindey 905-319-9258 HT - HEAT TREAT AMS-2759/6

618 2018-04-30 NMG Aerospace - OH (4563) 4880 HUDSON DRIVE STOW OH USA

Randy Anderson(VP); Scott Crawford (Dir

QA-CI); Tom Blados (non-hydraulic);Ken

Duncan (hydraulic) (330) 688-6494 AQS - QUALITY SYSTEM AS 9100

618 2018-04-30 NMG Aerospace - OH (4563) 4880 HUDSON DRIVE STOW OH USA

Randy Anderson(VP); Scott Crawford (Dir

QA-CI); Tom Blados (non-hydraulic);Ken

Duncan (hydraulic) (330) 688-6494 CP01 - COATING, PAINT APPLICATION MIL-F-18264

638 2013-12-02 Noranco – Vaughan Division (12266) 55A Westcreek Drive Vaughan Ontario Canada Wayne Cleland 905 856-1801 ext 344 AQS - QUALITY SYSTEM AS 9100

638 2013-12-02 Noranco – Vaughan Division (12266) 55A Westcreek Drive Vaughan Ontario Canada Wayne Cleland 905 856-1801 ext 344 CMSP - GRINDING, CHROME LGPS-7000

638 2013-12-02 Noranco – Vaughan Division (12266) 55A Westcreek Drive Vaughan Ontario Canada Wayne Cleland 905 856-1801 ext 344 CMSP - GRINDING, CHROME MIL-STD-866

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 AQS - QUALITY SYSTEM AC7004

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP01 - COATING, DRY FILM MIL-L-23398

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP01 - COATING, DRY FILM MIL-PRF-46010

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP01 - COATING, PAINT APPLICATION BR-167

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP01 - COATING, PAINT APPLICATION MIL-F-18264

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP12 - PASSIVATION AMS-2700

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 CP15 - PRE-PENETRANT ETCH AC7108/15

642 2015-08-31 North East Finishing Co (4560) 245 Ralph Ave Copiague NY USA Deborah Vermilye 631-789-8000 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

Page (27) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


646 NSL Analytical Services (3236) 4450 Cranwood Pkwy Warrensville Hts. OH USA Cynthia Hagan 216 (438-5200) AQS - QUALITY SYSTEM ISO 17025

1506 2017-12-31 O&W Heat Treat Inc. (3238) 1 Bidwell Rd. South Windsor CT USA Robert Simmons 860-528-9239 AQS - QUALITY SYSTEM AC7004

1506 2017-12-31 O&W Heat Treat Inc. (3238) 1 Bidwell Rd. South Windsor CT USA Robert Simmons 860-528-9239 HT - HEAT TREAT AMS-2759/3

1506 2017-12-31 O&W Heat Treat Inc. (3238) 1 Bidwell Rd. South Windsor CT USA Robert Simmons 860-528-9239 HT - HEAT TREAT AMS-H-6875

1393 Oerlikon Balzers Coating UK (9977) Bradbourne Drive Tilbrook Milton Keynes UK Donna Nickson +44 1908-377-277 AQS - QUALITY SYSTEM AS 9100 Processing to GAS specifications only

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 AQS - QUALITY SYSTEM AS 9100

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 HT - HEAT TREAT AMS-2771

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 WLD - WELDING AMS-2694

1321 2016-11-30 O'Fallon Casting LLC (3172) 600 Cannonball Lane O'Fallon MO USA Ben Galmiche 636-272-6176 WLD - WELDING AWS-D17.1

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 AQS - QUALITY SYSTEM AS 9100

Processing to Boeing DPS specs per D1-4426 in support of C-17

MRO work only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CMSP - GRINDING, CHROME MIL-STD-866 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP02 - TEMPER ETCH INSPECTION MIL-STD-867 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP09 - PLATING, CHROME MIL-STD-1501 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP09 - PLATING, NICKEL MIL-STD-868 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 CP15 - PRE-PENETRANT ETCH See limitations

Pre-penetrant etch of aluminum only per DPS9.301 as called for

in DPS4.707 (Boeing D1-4426 approved) to support internal C-17

MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 HT - STRESS RELIEF AMS-2759/11 375°F maximum, C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 C-17 MRO only.

422 Ogden Air Logistics (Hill AFB) OOALC/CMXG/ OBS 5760 Southgate AVE., BLDG 507, Room 206 Hill AFB UT USA Jeffery Clark 801-775-4234 SE - SHOT PEEN AMS-2430 C-17 MRO only.

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 AQS - QUALITY SYSTEM AS 9100

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 CP09 - PLATING, ZINC NICKEL AMS-2417

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 CP15 - PRE-PENETRANT ETCH AC7108/15

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 HT - STRESS RELIEF AMS-2759/11

1449 2018-01-31 Omni Metal Finishing Inc. (3241) 11665 Coley River Circle Fountain Valley CA USA Juan Moreno 714-979-9414 x2256 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1201 Online Graphics & Finishing (10635) 1924 N. Lime St. Orange CA USA Eric Stoll 714-635-3790 AQS - QUALITY SYSTEM AS 9100

1201 Online Graphics & Finishing (10635) 1924 N. Lime St. Orange CA USA Eric Stoll 714-635-3790 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1479 Orange Coast Testing Inc (5518) 1305-J East Saint Gertrude Pl Santa Ana CA USA Paul May 714-557-5844 AQS - QUALITY SYSTEM AC7004

1479 Orange Coast Testing Inc (5518) 1305-J East Saint Gertrude Pl Santa Ana CA USA Paul May 714-557-5844 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1479 Orange Coast Testing Inc (5518) 1305-J East Saint Gertrude Pl Santa Ana CA USA Paul May 714-557-5844 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1479 Orange Coast Testing Inc (5518) 1305-J East Saint Gertrude Pl Santa Ana CA USA Paul May 714-557-5844 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 AQS - QUALITY SYSTEM AC7004

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 CP02 - TEMPER ETCH INSPECTION AMS-2649

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 CP02 - TEMPER ETCH INSPECTION BP-108

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 CP02 - TEMPER ETCH INSPECTION CP-0350

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 CP02 - TEMPER ETCH INSPECTION LGPS-3000

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 HT - STRESS RELIEF AMS-H-6875 525°F maximum

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 HT - STRESS RELIEF LGPS-2002 525°F maximum

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - INSPECTION, ULTRASONIC CPC-9104

655 2014-11-30 Orbit Industries (3243) 6840 Lake Abram Dr. Middleburg Hts. OH USA Gary White (440) 243-3311 NDT - PRE-PENETRANT ETCH AC7108/15

1135 OVS Villella (8001) Via Dello Sport, 26/28 Sesto Calende, Vareze Italy Fabrizio De Tomasi 00390331922380 AQS - QUALITY SYSTEM AS 9100

1135 OVS Villella (8001) Via Dello Sport, 26/28 Sesto Calende, Vareze Italy Fabrizio De Tomasi 00390331922380 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 MIL-A-8625 TYPE 1B CLASS 1

1135 OVS Villella (8001) Via Dello Sport, 26/28 Sesto Calende, Vareze Italy Fabrizio De Tomasi 00390331922380 CP12 - PASSIVATION AMS-2700

1135 OVS Villella (8001) Via Dello Sport, 26/28 Sesto Calende, Vareze Italy Fabrizio De Tomasi 00390331922380 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant capability on site

1135 OVS Villella (8001) Via Dello Sport, 26/28 Sesto Calende, Vareze Italy Fabrizio De Tomasi 00390331922380 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

657 2017-03-31 P M Testing Laboratory Inc (4535) 3921 Pacific Highway East Tacoma WA USA Steve Lewis (253) 922-1321 AQS - QUALITY SYSTEM AC7004

657 2017-03-31 P M Testing Laboratory Inc (4535) 3921 Pacific Highway East Tacoma WA USA Steve Lewis (253) 922-1321 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 AQS - QUALITY SYSTEM AC7004

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 CP12 - PASSIVATION AMS-2700

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 CP12 - PASSIVATION ASTM-A-380

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 CP12 - PASSIVATION ASTM-A-967

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 CP15 - PRE-PENETRANT ETCH AC7108/15

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

661 Pacific Magnetic & Penetrant Co., Inc. (3251) 6837 Farmdale Ave. North Hollywood CA USA Richard Rodriguez (818) 765-7266 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 AQS - QUALITY SYSTEM AS 9100

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT AMS-2759/1




662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT AMS-2770

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT AMS-H-6088



662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT BP-106




662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT CP-0540

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT ES-0744

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT LGPS-2002

662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT MM-4990



662 2017-08-31 Pacific Metallurgical Inc. (4268) 925 5th. Ave. South Kent WA USA Kevin Bellington (253) 854-4241 HT - HEAT TREAT PS-2101

1378 Parker Trutec Inc. 4700 GATEWAY BLVD Springfield OH USA Shannon Ricciardo 937-323-8833 HT - HEAT TREAT E.S. 6.183 17-22A steel parts as per E.S. 6.183.3, part number 184-923

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 AQS - QUALITY SYSTEM AS 9100

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 CT - GRINDING, HVOF LGPS-7010

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-006)

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 CT - STRIPPING, HVOF LGPS-1300

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 NDT - PRE-PENETRANT ETCH AC7108/15

Page (28) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


123 2016-10-31 PAS Technologies - Kansas City (5202) 1234 Atlantic N. Kansas City MO USA Allison Martinez 816-556-4607 SE - SHOT PEEN AMS-2430

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 AQS - QUALITY SYSTEM AS 9100

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CMSP - GRINDING, CHROME LGPS-7000

Approval restricted to MRO only, on grind machines O/D-3, O/D-

5, O/D-6, I/D-4, I/D-10 only.

PAS-KC is not Nadcap or BAC5032 approved.

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CMSP - GRINDING, CHROME MIL-STD-866

Approval restricted to MRO only, on grind machines O/D-3, O/D-

5, O/D-6, I/D-4, I/D-10 only.

PAS-KC is not Nadcap or BAC5032 approved.

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP01 - COATING, PAINT APPLICATION LGPS-1001

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP01 - COATING, PAINT APPLICATION MIL-F-18264

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP02 - TEMPER ETCH INSPECTION AMS-2649

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP02 - TEMPER ETCH INSPECTION LGPS-3000

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 type 1b

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 type 2b

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CHROME AMS-2460

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CHROME LGPS-1101

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, CHROME MIL-STD-1501

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, NICKEL AMS-2403

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP09 - PLATING, NICKEL AMS-2424

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637



124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924



MANG/ZN AMS-2481




124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP12 - PASSIVATION AMS-2700

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP12 - PASSIVATION ASTM-A-967

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 CP15 - PRE-PENETRANT ETCH AC7108/15

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 HT - STRESS RELIEF AMS-2759/11 Stress relief up to 850°F

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 SE - SHOT PEEN AMS-2430

124 2019-05-31 PAS Technologies - Phoenix (3378) 1021 N 22nd Ave Phoenix AZ USA Mark Soward 602-744-2637 SE - SHOT PEEN AMS-2432

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 AQS - QUALITY SYSTEM AS 9100 In-house support only.

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 HT - HEAT TREAT AMS-2759/3 In-house support only.



126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 HT - HEAT TREAT AMS-H-6875 In-house support only.

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 HT - STRESS RELIEF AMS-2759/11 In-house support only.

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 In-house support only.

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 In-house support only.

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 NDT - PRE-PENETRANT ETCH AC7108/15

126 PCC Structurals – San Leandro (3456) 414 Hester St San Leandro CA USA Bhu Kenjale (510) 568-6400 X369 WLD - WELDING AWS-D17.1 In-house support only.

128 Peen-Rite Inc (5311) 11662 Sheldon St. Sun Valley CA USA Mike Garcia (818) 767-3676 AQS - QUALITY SYSTEM AC7004

128 Peen-Rite Inc (5311) 11662 Sheldon St. Sun Valley CA USA Mike Garcia (818) 767-3676 SE - MANUAL PEENING AMS-2430

128 Peen-Rite Inc (5311) 11662 Sheldon St. Sun Valley CA USA Mike Garcia (818) 767-3676 SE - SHOT PEEN AMS-2430

128 Peen-Rite Inc (5311) 11662 Sheldon St. Sun Valley CA USA Mike Garcia (818) 767-3676 SE - SHOT PEEN CPC-6400

1414 Pelcoat LLC dba Nation Coating Systems (10545) 501 Shotwell Dr. Franklin OH USA Tom Mroz 937-746-7632 AQS - QUALITY SYSTEM AS 9100

1414 Pelcoat LLC dba Nation Coating Systems (10545) 501 Shotwell Dr. Franklin OH USA Tom Mroz 937-746-7632 CT - HVOF AMS-2447

1414 Pelcoat LLC dba Nation Coating Systems (10545) 501 Shotwell Dr. Franklin OH USA Tom Mroz 937-746-7632 CT - HVOF E.S. 6.195 Limited to drive inserts

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 AQS - QUALITY SYSTEM AC7004

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT AMS-2759/1






131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT AMS-2770

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT AMS-H-6875

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT AMS-H-81200

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT LGPS-2002

131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - HEAT TREAT MM-4990



131 2017-11-30 Phoenix Heat Treating, Inc. (3698) 2405 West Mohave Phoenix AZ USA Michael Hushek (602) 258-7751 HT - STRESS RELIEF AMS-2759/11

132 2018-11-30 Phoenix Spring Company (3975) 2032 South Industrial Park Ave Tempe AZ USA Jess Perez (480) 967-7733 AQS - QUALITY SYSTEM AS 9100

132 2018-11-30 Phoenix Spring Company (3975) 2032 South Industrial Park Ave Tempe AZ USA Jess Perez (480) 967-7733 CP12 - PASSIVATION AMS-2700

132 2018-11-30 Phoenix Spring Company (3975) 2032 South Industrial Park Ave Tempe AZ USA Jess Perez (480) 967-7733 CP12 - PASSIVATION AMS-QQ-P-35

132 2018-11-30 Phoenix Spring Company (3975) 2032 South Industrial Park Ave Tempe AZ USA Jess Perez (480) 967-7733 HT - HEAT TREAT AMS-2759/1




132 2018-11-30 Phoenix Spring Company (3975) 2032 South Industrial Park Ave Tempe AZ USA Jess Perez (480) 967-7733 HT - STRESS RELIEF AMS-2759/11 1400'F maximum.

1620 Pioneer Metal Finishing - South Bend 2424 Foundation Drive South Bend IN USA (574) 287-7239 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107

673 2019-02-28 Plasma Coating Corp (4754) 13309 South Western Ave Gardena CA USA Moses Choi (310) 532-3064 AQS - QUALITY SYSTEM AS 9100

673 2019-02-28 Plasma Coating Corp (4754) 13309 South Western Ave Gardena CA USA Moses Choi (310) 532-3064 CP01 - COATING, DRY FILM MIL-PRF-46010

673 2019-02-28 Plasma Coating Corp (4754) 13309 South Western Ave Gardena CA USA Moses Choi (310) 532-3064 CT - GRINDING, HVOF LGPS-7010

673 2019-02-28 Plasma Coating Corp (4754) 13309 South Western Ave Gardena CA USA Moses Choi (310) 532-3064 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-010)

673 2019-02-28 Plasma Coating Corp (4754) 13309 South Western Ave Gardena CA USA Moses Choi (310) 532-3064 CT - STRIPPING, HVOF LGPS-1300

674 2018-02-28 Plasma Technology (3703) 1754 Crenshaw Blvd. Torrance CA USA Domingo Hernadez (310) 320-3373 AQS - QUALITY SYSTEM AS 9100

Approval limited to HVOF processing to BAC5851,

PS13152 as per Boeing's D1-4426.

674 2018-02-28 Plasma Technology (3703) 1754 Crenshaw Blvd. Torrance CA USA Domingo Hernadez (310) 320-3373 CT - GRINDING, HVOF LGPS-7010

674 2018-02-28 Plasma Technology (3703) 1754 Crenshaw Blvd. Torrance CA USA Domingo Hernadez (310) 320-3373 CT - HVOF AMS-2447

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 AQS - QUALITY SYSTEM AC7004

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CHROME AMS-2460

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CHROME AMS-QQ-C-320

Page (29) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CHROME LGPS-1101

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP09 - PLATING, CHROME MIL-STD-1501

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP12 - PASSIVATION AMS-2700

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP12 - PASSIVATION E.S. 6.19

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 HT - STRESS RELIEF AMS-2759/11 375'F only.

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 HT - STRESS RELIEF AMS-H-6875 375'F only.

676 2014-10-31 Plating Perceptions, Inc. (4563) 8815 Herrick Road Twinsburg OH USA Tim Burkhart (330) 425-4180 HT - STRESS RELIEF LGPS-2002 375'F only.

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 AQS - QUALITY SYSTEM AC7004

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

678 2014-10-31 Poly Metal Finishing, Inc. (3705) 1 Allen St. Springfield MA USA Vincent Jegelewicz (413) 781-4535



679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 AQS - QUALITY SYSTEM AC7004

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, COPPER AMS-2418

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, COPPER MMC-254

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, NICKEL AMS-2403

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, NICKEL AMS-2424

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, NICKEL AMS-QQ-N-290

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP09 - PLATING, SILVER AMS-2410

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP12 - PASSIVATION AMS-2700

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP12 - PASSIVATION ASTM-A-967

679 2015-08-31 PPI Aerospace LLC (Main) (3840) 23514 Groesbeck Hwy. Warren MI USA David Prescott (586) 772-7736 CP14 - STRIPPING, HVOF LGPS-1300

1514 PPI Aerospace LLC (Paint) (8786) 23230 Amber St. Warren MI USA David Prescott 586-772-7736 AQS - QUALITY SYSTEM AC7004

1514 PPI Aerospace LLC (Paint) (8786) 23230 Amber St. Warren MI USA David Prescott 586-772-7736 CP01 - COATING, PAINT APPLICATION MIL-F-18264

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 AQS - QUALITY SYSTEM AS 9100 Multiple addresses on Main Street, Indianapolis, Indiana

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 CP14 - STRIPPING, HVOF LGPS-1300 At 1405 Main St. facility

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 CT - HVOF AMS-2447 At 1415 Main St. facility

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 CT - HVOF E.S. 6.212 As per E.S. 19.6

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 CT - PLASMA ARC SPRAY E.S. 6.211 As per E.S. 19.5

680 Praxair Surface Tech. - Indianapolis (3707) 1500 Polco Street Indianapolis IN USA Brook Kessinger (317) 240-2613 CT - PLASMA ARC SPRAY MMC-275

1329 Praxair Surface Technologies - CT (3770) 1366 TOLLAND TPKE Manchester CT USA Bruce Pederson 860-646-0700 AQS - QUALITY SYSTEM AS 9100

1329 Praxair Surface Technologies - CT (3770) 1366 TOLLAND TPKE Manchester CT USA Bruce Pederson 860-646-0700 CP01 - COATING, CERAMIC METALLIC (SERMETEL®) E.S. 6.185 Sermetel Process 2F-1

1329 Praxair Surface Technologies - CT (3770) 1366 TOLLAND TPKE Manchester CT USA Bruce Pederson 860-646-0700 CP01 - COATING, DRY FILM MIL-PRF-46010

683 Praxair Surface Technologies K. K (7339) 1944-3 Shimoishidokami Kitamoto-shi Saitama-ken Japan Takahiro Kobayashi AQS - QUALITY SYSTEM JISQ9100 Processing to Boeing specifications per D1-4426

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 AQS - QUALITY SYSTEM AC7004

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP01 - COATING, DRY FILM MIL-PRF-46010

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP01 - COATING, DRY FILM MMC-155

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP01 - COATING, PAINT APPLICATION LGPS-1001

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP01 - COATING, PAINT APPLICATION MIL-F-18264

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP02 - TEMPER ETCH INSPECTION LGPS-3000

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-DTL-5541 Type I only

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, COPPER AMS-2418

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, COPPER MMC-254

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP09 - PLATING, NICKEL AMS-2424

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP12 - PASSIVATION AMS-2700

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP12 - PASSIVATION ASTM-A-967

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 CP15 - PRE-PENETRANT ETCH AC7108/15

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 HT - STRESS RELIEF AMS-H-6875

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 SE - SHOT PEEN AMS-2430

272 Praxair Surface Technologies Montreal LP, St-Laurent (3539) 2300 Cohen St. Laurent Quebec Canada Iiena Dvorkin (514) 333-0030 x201 SE - SHOT PEEN CPC-6400

687 2014-09-30 Precision Aerospace Corp (3721) 11155 Jersey Blvd, Suite A Rancho Cucamonga CA USA Jim Stephens (909) 980-8855 AQS - QUALITY SYSTEM AS 9100

687 2014-09-30 Precision Aerospace Corp (3721) 11155 Jersey Blvd, Suite A Rancho Cucamonga CA USA Jim Stephens (909) 980-8855 CP05 - CHEMICAL MILLING AMS-81769

1170 Precision CNC 71 E Jefryn Blvd Deer Park NY USA Geoff Gliebe 631-847-3999 NA - ROLLER BURNISHING BR-163 PNs 2578100 and 2578134

689 2018-01-31 Precision Coil Spring (4041) 10107 Rose St El Monte CA USA Steven Belling (626) 444-0561 X242 AQS - QUALITY SYSTEM AS 9100

689 2018-01-31 Precision Coil Spring (4041) 10107 Rose St El Monte CA USA Steven Belling (626) 444-0561 X242 HT - HEAT TREAT AMS-2759/3

689 2018-01-31 Precision Coil Spring (4041) 10107 Rose St El Monte CA USA Steven Belling (626) 444-0561 X242 HT - HEAT TREAT AMS-2759/4

689 2018-01-31 Precision Coil Spring (4041) 10107 Rose St El Monte CA USA Steven Belling (626) 444-0561 X242 HT - HEAT TREAT AMS-H-81200

689 2018-01-31 Precision Coil Spring (4041) 10107 Rose St El Monte CA USA Steven Belling (626) 444-0561 X242 HT - HEAT TREAT MIL-H-7199

1416 Progress Services Inc. (4671) 13948 Progress Pkwy North Royalton OH USA Carl Becker 440-237-1811 AQS - QUALITY SYSTEM ISO 17025 A2LA

1416 Progress Services Inc. (4671) 13948 Progress Pkwy North Royalton OH USA Carl Becker 440-237-1811 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1416 Progress Services Inc. (4671) 13948 Progress Pkwy North Royalton OH USA Carl Becker 440-237-1811 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1416 Progress Services Inc. (4671) 13948 Progress Pkwy North Royalton OH USA Carl Becker 440-237-1811 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1416 Progress Services Inc. (4671) 13948 Progress Pkwy North Royalton OH USA Carl Becker 440-237-1811 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 AQS - QUALITY SYSTEM AS 9100

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP01 - COATING, DRY FILM MIL-PRF-46010

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP01 - COATING, PAINT APPLICATION MIL-F-18264

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP09 - PLATING, COPPER AMS-2418

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP12 - PASSIVATION AMS-2700

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP12 - PASSIVATION ASTM-A-967

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 CP15 - PRE-PENETRANT ETCH AC7108/15

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 HT - STRESS RELIEF AMS-2759/11 875'F maximum

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 SE - MANUAL PEENING AMS-2430

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 SE - MANUAL PEENING LGPS-1501

701 2017-02-28 Protective Coatings, Inc. (4566) 1208 4th Ave. Kent WA USA Virginia Tuimauga (253) 854-9330 SE - SHOT PEEN AMS-2430

Page (30) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


704 2018-10-31 PTI Industries Inc (3735) 2 PEERLESS WAY ENFIELD CT USA Dawn Stokes (860) 698-9266 AQS - QUALITY SYSTEM AC7004

704 2018-10-31 PTI Industries Inc (3735) 2 PEERLESS WAY ENFIELD CT USA Dawn Stokes (860) 698-9266 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

704 2018-10-31 PTI Industries Inc (3735) 2 PEERLESS WAY ENFIELD CT USA Dawn Stokes (860) 698-9266 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1134 2014-11-05 Pyrotek (4587) 2285 Queen Street Unit 101 Abbotsford B.C. Canada Ted Croft 1-604-859-4484 AQS - QUALITY SYSTEM AC7004

Heat Treat and Heat Treat Inspection per Boeing specifications

BAC5602 & BAC5946

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 AQS - QUALITY SYSTEM AS 9100

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CMSP - GRINDING, CHROME MIL-STD-866

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP01 - COATING, DRY FILM MIL-PRF-46010

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP09 - PLATING, CHROME AMS-2460

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP09 - PLATING, CHROME AMS-QQ-C-320

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP09 - PLATING, CHROME E.S. 6.131

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP12 - PASSIVATION AMS-2700

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 CP12 - PASSIVATION E.S. 6.19

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 HT - HEAT TREAT AMS-2759/1




707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 HT - STRESS RELIEF AMS-2759/11

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

707 QingAn Group Co. Ltd.(8347) 628 Daqing Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NM - EDM (Electro Discharge Machining) N/A As per contractual and engineering drawing requirements.

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 AQS - QUALITY SYSTEM AS 9100

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, TEMPER ETCH MIL-STD-867

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

1499 QingAn Group Co.Ltd.(10938) No. 12 Fengcheng Road Xi'an Shaanxi China Yanhui Wu 86 29 84635518 NM - EDM (Electro Discharge Machining) N/A As per contractual and engineering drawing requirements.

709 Quality Aluminum Forge (4427) 794 N. Cypress St. Orange CA USA Sandy Williams (714) 639-8191 X210 AQS - QUALITY SYSTEM AS 9100

709 Quality Aluminum Forge (4427) 794 N. Cypress St. Orange CA USA Sandy Williams (714) 639-8191 X210 HT - HEAT TREAT AMS-2772

709 Quality Aluminum Forge (4427) 794 N. Cypress St. Orange CA USA Sandy Williams (714) 639-8191 X210 HT - HEAT TREAT MIL-H-6088

709 Quality Aluminum Forge (4427) 794 N. Cypress St. Orange CA USA Sandy Williams (714) 639-8191 X210 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

709 Quality Aluminum Forge (4427) 794 N. Cypress St. Orange CA USA Sandy Williams (714) 639-8191 X210 NDT - PRE-PENETRANT ETCH AC7108/15

711 2018-02-28 Quality Heat Treating (4407) 3305 Burton Ave Burbank CA USA Jose Velazquez (818) 840-8212 AQS - QUALITY SYSTEM AC7004

711 2018-02-28 Quality Heat Treating (4407) 3305 Burton Ave Burbank CA USA Jose Velazquez (818) 840-8212 HT - HEAT TREAT AMS-2759/1





711 2018-02-28 Quality Heat Treating (4407) 3305 Burton Ave Burbank CA USA Jose Velazquez (818) 840-8212 HT - HEAT TREAT AMS-2801

711 2018-02-28 Quality Heat Treating (4407) 3305 Burton Ave Burbank CA USA Jose Velazquez (818) 840-8212 HT - HEAT TREAT AMS-H-6875

711 2018-02-28 Quality Heat Treating (4407) 3305 Burton Ave Burbank CA USA Jose Velazquez (818) 840-8212 HT - HEAT TREAT AMS-H-81200

713 Quality Steel Treating LLC (4005) 3860 Prospect St. Indianapolis IN USA Chris Palmer (317) 357-8691 AQS - QUALITY SYSTEM AS 9100

713 Quality Steel Treating LLC (4005) 3860 Prospect St. Indianapolis IN USA Chris Palmer (317) 357-8691 HT - HEAT TREAT AMS-2759/3

713 Quality Steel Treating LLC (4005) 3860 Prospect St. Indianapolis IN USA Chris Palmer (317) 357-8691 HT - STRESS RELIEF AMS-H-6875

51 2015-07-31 RBC AeroStructures (11247) 123 Commerce Way Westminster SC USA Doug Starzec 706-782-4245 AQS - QUALITY SYSTEM AS 9100

Approved for swaging, MPI and stress relief bake only as per

Boeing's D1-4426 approvals

1627 REM Surface Engineering 325 W. Queen St. Southington CT USA Jeffrey Tatem 860-621-6755 AQS - QUALITY SYSTEM AS 9100

1627 REM Surface Engineering 325 W. Queen St. Southington CT USA Jeffrey Tatem 860-621-6755 NA - ISOTROPIC SUPERFINISHING E.S. 6.206

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 AQS - QUALITY SYSTEM AS 9100

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - HEAT TREAT AMS-2759/3

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - HEAT TREAT AMS-2801

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - HEAT TREAT AMS-4957

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - HEAT TREAT AMS-H-6875

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - HEAT TREAT AMS-H-81200

723 2016-11-30 Renton Coil Spring Co. (4559) 425 S. 7th Street Renton WA USA Tim Palekha (425) 255-1453 ext. 227 HT - STRESS RELIEF AMS-2759/11 1050'F maximum

726 2019-03-31 Rex Heat Treat (3749) 8th St & Valley Forge Rd Lansdale PA USA Sarah Mansuetti 215 855 1131 x221 AQS - QUALITY SYSTEM AC7004

726 2019-03-31 Rex Heat Treat (3749) 8th St & Valley Forge Rd Lansdale PA USA Sarah Mansuetti 215 855 1131 x221 HT - HEAT TREAT AMS-2759/1





726 2019-03-31 Rex Heat Treat (3749) 8th St & Valley Forge Rd Lansdale PA USA Sarah Mansuetti 215 855 1131 x221 HT - HEAT TREAT AMS-2770





726 2019-03-31 Rex Heat Treat (3749) 8th St & Valley Forge Rd Lansdale PA USA Sarah Mansuetti 215 855 1131 x221 HT - HEAT TREAT AMS-H-6875

726 2019-03-31 Rex Heat Treat (3749) 8th St & Valley Forge Rd Lansdale PA USA Sarah Mansuetti 215 855 1131 x221 HT - HEAT TREAT AMS-H-81200

730 Robert Wooler Co (4249) 1755 Limekiln Pike Dresher PA USA Craig Skinner 215-542-7600 AQS - QUALITY SYSTEM AC7004

730 Robert Wooler Co (4249) 1755 Limekiln Pike Dresher PA USA Craig Skinner 215-542-7600 HT - HEAT TREAT AMS-2759/1



1373 Ross Aluminum Castings LLC (3755) 815 North Oak Ave Sidney OH USA Gail Bowers 937-492-4134 x1147 AQS - QUALITY SYSTEM AS 9100

1373 Ross Aluminum Castings LLC (3755) 815 North Oak Ave Sidney OH USA Gail Bowers 937-492-4134 x1147 HT - HEAT TREAT AMS-2771

1373 Ross Aluminum Castings LLC (3755) 815 North Oak Ave Sidney OH USA Gail Bowers 937-492-4134 x1147 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1373 Ross Aluminum Castings LLC (3755) 815 North Oak Ave Sidney OH USA Gail Bowers 937-492-4134 x1147 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 AQS - QUALITY SYSTEM AS 9100

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CMSP - GRINDING, CHROME MIL-STD-866

Stainless steel parts only. No chrome grinding on high strength

steel.

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP01 - COATING, DRY FILM MIL-PRF-46010

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP01 - COATING, PAINT APPLICATION MIL-F-18264

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP02 - TEMPER ETCH INSPECTION LGPS-3000

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP12 - PASSIVATION AMS-2700

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 HT - STRESS RELIEF AMS-2759/11 850°F maximum

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

737 RUAG Australia Pty Ltd. (5422) Locked Bag 39, 836 Mountain Hwy Bayswater Victoria Australia Patrick Del Don +61 3 9721 1316 SE - SHOT PEEN AMS-2430

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 AQS - QUALITY SYSTEM AC7004

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

Page (31) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP09 - PLATING, CHROME AMS-2406

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP09 - PLATING, CHROME AMS-2460

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP12 - PASSIVATION AMS-2700

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP12 - PASSIVATION ASTM-A-380

743 Saporito Finishing Co. (4274) 3119 S. Austin Avenue Cicero IL USA Keith Logan (708) 222-5300 CP12 - PASSIVATION ASTM-A-967

744 2019-07-31 Sargent Controls & Aerospace (4716) 5675 West Burlingame Tucson AZ USA Joel Dugle

(520) 744-1000 x4448 / Cell 520-



(520) 744-1000 x4448 / Cell 520-

257-0012 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site


(520) 744-1000 x4448 / Cell 520-

257-0012 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1107 2016-07-31 Sargent Mexico - Airtomic (6932)

Carretera Internacional Km. 129 Nte., Parque Industrial

Rocafuerte Guaymas Sonora Mexico Edgar Leon 622-221-0854 AQS - QUALITY SYSTEM AS 9100

1107 2016-07-31 Sargent Mexico - Airtomic (6932)

Carretera Internacional Km. 129 Nte., Parque Industrial

Rocafuerte Guaymas Sonora Mexico Edgar Leon 622-221-0854 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant capability on-site

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 AQS - QUALITY SYSTEM AS 9100

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP01 - COATING, DRY FILM MIL-PRF-46010

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP01 - COATING, PAINT APPLICATION LGPS-1001

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP02 - TEMPER ETCH INSPECTION LGPS-3000

Flowchart 1A — Temper Etch Immersion Method (Alternate

Etching) only

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 CP12 - PASSIVATION AMS-2700

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 HT - HEAT TREAT AMS-2759/1



1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1222 Secondo Mona (7808) Via Carlo del Prete, 1 Somma Lombardo Vareze Italy Nicola Ghilioni 0039 0331 756111 SE - FLAPPER / ROTO PEENING AMS-2590

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 AQS - QUALITY SYSTEM AS 9100

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 CP12 - TITANIUM CLEANING ASTM-B-600

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 CP15 - PRE-PENETRANT ETCH AC7108/15

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 HT - HEAT TREAT AMS-H-81200

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

1380 Selmet Inc (3763) 33992 SE Seven Mile Lane Albany OR USA Brice Winney 541-917-8389 WLD - WELDING AWS-D17.1

760 2016-01-31 Service & Sales, Inc. (3773) 1853 E. 3rd Street Tempe AZ USA Greg Lowe 480-968-9084 (X-120) AQS - QUALITY SYSTEM AS 9100

760 2016-01-31 Service & Sales, Inc. (3773) 1853 E. 3rd Street Tempe AZ USA Greg Lowe 480-968-9084 (X-120) WLD - WELDING AWS-D17.1 Approved for in-house product only.

765 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) ZHANG XING YUE VILLAGE San Yuan City Shannxi China Wang Rong 86-29-2870613 AQS - QUALITY SYSTEM AS 9100

765 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) ZHANG XING YUE VILLAGE San Yuan City Shannxi China Wang Rong 86-29-2870613 HT - HEAT TREAT AMS-H-6875

765 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) ZHANG XING YUE VILLAGE San Yuan City Shannxi China Wang Rong 86-29-2870613 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 AQS - QUALITY SYSTEM AS 9100

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 HT - HEAT TREAT AMS-H-6875

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 HT - HEAT TREAT AMS-H-81200

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

135 2018-02-28 Shultz Steel Co. (4392) 5321 Firestone Blvd South Gate CA USA Stephen Goode (323) 357-3350 NDT - INSPECTION, ULTRASONIC CPC-9104

138 Sierra Spray Painting Ltd. (11458) 640 Hardwick Rd. Bolton Ontario Canada Mathew Maureira (905) 951-6313 AQS - QUALITY SYSTEM AS 9100

138 Sierra Spray Painting Ltd. (11458) 640 Hardwick Rd. Bolton Ontario Canada Mathew Maureira (905) 951-6313 CP01 - COATING, PAINT APPLICATION LGPS-1001

138 Sierra Spray Painting Ltd. (11458) 640 Hardwick Rd. Bolton Ontario Canada Mathew Maureira (905) 951-6313 CP01 - COATING, PAINT APPLICATION MIL-F-18264

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 AQS - QUALITY SYSTEM AS 9100

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 CP15 - PRE-PENETRANT ETCH AC7108/15

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 HT - HEAT TREAT AMS-H-6875

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 HT - HEAT TREAT AMS-H-81200

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

804 2014-06-30 Sifco Forge Group (3777) 970 East 64th Street Cleveland OH USA Elizabeth Zumwalt 216-426-2822 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

770 2019-02-22 Signature Aerospace (5424) 6090 Vanden Abeele St. Laurent Quebec Canada BRIAN WILLWARD (514) 333-4703 AQS - QUALITY SYSTEM AS 9100

770 2019-02-22 Signature Aerospace (5424) 6090 Vanden Abeele St. Laurent Quebec Canada BRIAN WILLWARD (514) 333-4703 CP01 - COATING, PAINT APPLICATION MIL-F-18264

776 2014-01-31 Smiths Tubular Systems - Laconia (3303) 93 LEXINGTON DR. LACONIA NH USA Matthew St. Pierre

(603) 524-2064 ,QM: 603-527-

5572 AQS - QUALITY SYSTEM AS 9100 Expired.


(603) 524-2064 ,QM: 603-527-

5572 CP15 - PRE-PENETRANT ETCH AC7108/15


(603) 524-2064 ,QM: 603-527-



(603) 524-2064 ,QM: 603-527-

5572 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742


(603) 524-2064 ,QM: 603-527-

5572 WLD - WELDING AMS-STD-2219

778 Sogo Spring Mfg. (7011) 2-7-4 Kurigi Asao-Ku Kawasaki- City Kanagawa Japan Tetsuya Kohno 81-44-981-1403 AQS - QUALITY SYSTEM JISQ9100

778 Sogo Spring Mfg. (7011) 2-7-4 Kurigi Asao-Ku Kawasaki- City Kanagawa Japan Tetsuya Kohno 81-44-981-1403 HT - HEAT TREAT AMS-2759/3

778 Sogo Spring Mfg. (7011) 2-7-4 Kurigi Asao-Ku Kawasaki- City Kanagawa Japan Tetsuya Kohno 81-44-981-1403 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1480 Solar Atmospheres of California (10486) 8606 Live Oak Ave Fontana CA USA Michael Moffit 909-217-7400 ext 1308 AQS - QUALITY SYSTEM AS 9100

1480 Solar Atmospheres of California (10486) 8606 Live Oak Ave Fontana CA USA Michael Moffit 909-217-7400 ext 1308 HT - HEAT TREAT AMS-2759/1





1480 Solar Atmospheres of California (10486) 8606 Live Oak Ave Fontana CA USA Michael Moffit 909-217-7400 ext 1308 HT - HEAT TREAT AMS-2801

1480 Solar Atmospheres of California (10486) 8606 Live Oak Ave Fontana CA USA Michael Moffit 909-217-7400 ext 1308 HT - HEAT TREAT AMS-H-6875

1480 Solar Atmospheres of California (10486) 8606 Live Oak Ave Fontana CA USA Michael Moffit 909-217-7400 ext 1308 HT - HEAT TREAT AMS-H-81200

779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 AQS - QUALITY SYSTEM AS 9100

779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 HT - HEAT TREAT AMS-2759/1





779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 HT - HEAT TREAT AMS-2801

779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 HT - HEAT TREAT AMS-H-6875

779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 HT - HEAT TREAT AMS-H-81200

779 2018-10-31 Solar Atmospheres of Western PA (4155) 30 Industrial Road Hermitage PA USA Susan Generalovich 866-982-0660 HT - STRESS RELIEF AMS-2759/11 All temperture ranges

780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 AQS - QUALITY SYSTEM AC7004

780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 CP09 - PLATING, CHROME AMS-2406



780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 CP09 - PLATING, CHROME AMS-QQ-C-320

780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 CP09 - PLATING, CHROME E.S. 6.131

780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 CP09 - PLATING, CHROME MIL-STD-1501

780 Somerville Plating (3785) 1305 N 31St Ave. Melrose Park IL USA Randy Hauslein (708) 345-5100 HT - STRESS RELIEF AMS-2759/9

1484 South West Metal Finishing (3856) Alphinbrook Rd Exeter Devon UK Steve Mayer + 44 139-225-8234 ext 227 AQS - QUALITY SYSTEM AS 9100

1484 South West Metal Finishing (3856) Alphinbrook Rd Exeter Devon UK Steve Mayer + 44 139-225-8234 ext 227 CP09 - PLATING, CHROME AMS-2406

1484 South West Metal Finishing (3856) Alphinbrook Rd Exeter Devon UK Steve Mayer + 44 139-225-8234 ext 227 CP09 - PLATING, CHROME AMS-QQ-C-320

Page (32) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1484 South West Metal Finishing (3856) Alphinbrook Rd Exeter Devon UK Steve Mayer + 44 139-225-8234 ext 227 CP12 - PASSIVATION AMS-2700

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 AQS - QUALITY SYSTEM AS 9100

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CMSP - GRINDING, CHROME LGPS-7000

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CMSP - GRINDING, CHROME MIL-STD-866

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CMSP - GRINDING, HVOF AMS-2449

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CMSP - GRINDING, HVOF LGPS-7010

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP01 - COATING, DRY FILM MIL-PRF-46010

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP01 - COATING, PAINT APPLICATION LGPS-1001

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP01 - COATING, PAINT APPLICATION MIL-F-18264

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP02 - TEMPER ETCH INSPECTION AMS-2649 Type I

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP02 - TEMPER ETCH INSPECTION LGPS-3000

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CHROME AMS-2460

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CHROME LGPS-1101

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, CHROME MIL-STD-1501

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, NICKEL AMS-2403

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP09 - PLATING, NICKEL AMS-2424

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP12 - PASSIVATION AMS-2700

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP12 - PASSIVATION ASTM-A-967

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CP14 - STRIPPING, HVOF LGPS-1300

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CT - HVOF AMS-2447

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CT - HVOF AMS-2448

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CT - HVOF E.S. 6.195 Torque bars only

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-019)

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 HT - STRESS RELIEF AMS-2759/11

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

789 2014-08-22 Southwest United Canada Inc. - CEEL Limited (5208) 85 Stafford Dr. Brampton Ontario Canada George Siha 905-456-3245 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 AQS - QUALITY SYSTEM AS 9100

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP01 - COATING, DRY FILM MIL-PRF-46010

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP01 - COATING, PAINT APPLICATION LGPS-1001

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP01 - COATING, PAINT APPLICATION MIL-F-18264

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30

CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric

Acid LGPS-1109

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP12 - PASSIVATION AMS-2700

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP12 - PASSIVATION ASTM-A-967

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP12 - TITANIUM CLEANING LGPS-8003

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP12 - TITANIUM CLEANING MMC-281

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 CP15 - PRE-PENETRANT ETCH AC7108/15

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 HT - STRESS RELIEF AMS-2759 800° F Max.

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 SE - MANUAL PEENING AMS-2430

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 SE - MANUAL PEENING LGPS-1501

790 2014-08-22 Southwest United Canada Inc.(4197) 8201 Keele St. #9 Concord Ontario Canada George Siha (905) 738-9225 x30 SE - SHOT PEEN AMS-2430

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 AQS - QUALITY SYSTEM AS 9100

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP01 - COATING, PAINT APPLICATION LGPS-1001

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP12 - PASSIVATION AMS-2700 Type VI & VIII

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP12 - PASSIVATION ASTM-A-380

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP12 - PASSIVATION ASTM-A-967

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 CP15 - PRE-PENETRANT ETCH AC7108/15

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 SE - MANUAL PEENING AMS-2430

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 SE - MANUAL PEENING LGPS-1501

1070 Southwest United Galnik SA de CV (10581) AV. DE LA LUZ 24 - 16, z. IND. B. JUAREZ Queretaro QRO Mexico Emmanuell Gonzalez Delgadillo 52-442-2095184 SE - SHOT PEEN AMS-2430

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CMSP - GRINDING, CHROME LGPS-7000

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CMSP - GRINDING, CHROME MIL-STD-866

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CMSP - GRINDING, HVOF LGPS-7010

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CMSP - GRINDING, HVOF LGPS-7013 Landis Belt Grinding Machine, ID: 769-75

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP01 - COATING, DRY FILM MIL-PRF-46010

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP01 - COATING, PAINT APPLICATION LGPS-1001

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP01 - COATING, PAINT APPLICATION MIL-F-18264

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP02 - TEMPER ETCH INSPECTION LGPS-3000

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 type 1B

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CHROME AMS-2460

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CHROME AMS-QQ-C-320 Superseded by AMS-2460

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CHROME LGPS-1101

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, CHROME PS-1033

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, NICKEL AMS-2403

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, NICKEL AMS-2424

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP09 - PLATING, NICKEL MM-5756

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP11 - CONVERSION COATING, ALUMINUM PS-1034

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264



791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP12 - PASSIVATION AMS-2700

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP12 - PASSIVATION ASTM-A-967

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP12 - TITANIUM CLEANING LGPS-8003

Page (33) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CP15 - PRE-PENETRANT ETCH AC7108/15

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS2144-030)

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CT - PLASMA ARC SPRAY MMC-275

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 CT - STRIPPING, HVOF LGPS-1300

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 HT - STRESS RELIEF AMS-2759/11 Stress relief up to 700°F

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 SE - MANUAL PEENING AMS-2430

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 SE - MANUAL PEENING LGPS-1501

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 SE - SHOT PEEN AMS-2430

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 SE - SHOT PEEN CPC-6400

791 2018-02-28 Southwest United Industries, Inc. (4185) 422 S. ST. Louis Ave. Tulsa OK USA Mike Brown (918) 587-4161 x264 SE - SHOT PEEN MM-5534

1417 Spec Plating Inc. (4293) 740 Seaview Ave. Bridgeport CT USA Stephen Balgach 206-333-3638 AQS - QUALITY SYSTEM AS 9100

1417 Spec Plating Inc. (4293) 740 Seaview Ave. Bridgeport CT USA Stephen Balgach 206-333-3638 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

1508 Specialty Steel Treating (3794) 12 Kripes Rd East Granby CT USA Ryan Kollmorgen 860-653-0061 AQS - QUALITY SYSTEM AS 9100

1508 Specialty Steel Treating (3794) 12 Kripes Rd East Granby CT USA Ryan Kollmorgen 860-653-0061 HT - HEAT TREAT AMS-2759/3

1418 Spectrum Thermal Processing (3162) 818 Wellington Ave. Cranston RI USA Richard Houghton 401-467-5201 AQS - QUALITY SYSTEM AS 9100

1418 Spectrum Thermal Processing (3162) 818 Wellington Ave. Cranston RI USA Richard Houghton 401-467-5201 HT - HEAT TREAT AMS-2759/1





1418 Spectrum Thermal Processing (3162) 818 Wellington Ave. Cranston RI USA Richard Houghton 401-467-5201 HT - HEAT TREAT AMS-H-6875

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 AQS - QUALITY SYSTEM AS 9100

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP01 - COATING, DRY FILM MIL-PRF-46010

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP01 - COATING, PAINT APPLICATION MIL-F-18264

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, COPPER AMS-2418

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, NICKEL AMS-2403

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, NICKEL AMS-2424

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP09 - PLATING, SILVER AMS-2410

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132



1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 CP12 - PASSIVATION AMS-2700

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 HT - HEAT TREAT AMS-2759/1




1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 HT - HEAT TREAT AMS-2770

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability

1237 2019-02-28 SPS Technologies/Aerospace Products (3799) 301 HIGHLAND AVE Jenkintown PA USA Joe Ackler (215) 572-3132 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

816 2018-03-31 ST&I Inc. - Surface Treatment & Inspection (3800) 7517 Jefferson St. Paramount CA USA Bill Glass (562) 634-6396 AQS - QUALITY SYSTEM AC7004

816 2018-03-31 ST&I Inc. - Surface Treatment & Inspection (3800) 7517 Jefferson St. Paramount CA USA Bill Glass (562) 634-6396 CP05 - CHEMICAL MILLING AMS-C-81769

816 2018-03-31 ST&I Inc. - Surface Treatment & Inspection (3800) 7517 Jefferson St. Paramount CA USA Bill Glass (562) 634-6396 CP05 - CHEMICAL MILLING CPC-8224 CPC-8224 is CPT-8224

816 2018-03-31 ST&I Inc. - Surface Treatment & Inspection (3800) 7517 Jefferson St. Paramount CA USA Bill Glass (562) 634-6396 CP05 - CHEMICAL MILLING MIL-C-81769

816 2018-03-31 ST&I Inc. - Surface Treatment & Inspection (3800) 7517 Jefferson St. Paramount CA USA Bill Glass (562) 634-6396 CP05 - CHEMICAL MILLING MM-5527

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 AQS - QUALITY SYSTEM AS 9100

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 HT - HEAT TREAT AMS-2759

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 HT - HEAT TREAT AMS-2770

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 HT - HEAT TREAT AMS-H-6875

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 HT - HEAT TREAT AMS-H-81200

801 2016-09-30 Stack Metallurgical Services, Inc. (3801) 5938 North Basin Portland OR USA Rick Reitberger 503-285-7703 HT - HEAT TREAT LGPS-2002

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 AQS - QUALITY SYSTEM AS 9100

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 CMSP - GRINDING, CHROME LGPS-7000

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 CMSP - GRINDING, CHROME MIL-STD-866

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 CP09 - PLATING, COPPER AMS-2418

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 HT - HEAT TREAT AMS-2759/11

810 2018-07-24 Strite Precision Machining Ltd. (12234) 298 Shepherd Ave. Cambridge Ontario Canada Terry Marquis (519) 658-9361 (332)/317 HT - STRESS RELIEF AMS-H-6875

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 AQS - QUALITY SYSTEM JISQ9100

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CMSP - GRINDING, CHROME LGPS-7000

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CMSP - GRINDING, CHROME MIL-STD-866

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP01 - COATING, DRY FILM AS-5528

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP01 - COATING, DRY FILM MIL-PRF-46010

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP01 - COATING, PAINT APPLICATION LGPS-1001

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP01 - COATING, PAINT APPLICATION MIL-F-18264

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP02 - TEMPER ETCH INSPECTION LGPS-3000

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CADMIUM-TITANIUM AMS-2419

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CHROME AMS-2460

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CHROME AMS-QQ-C-320

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CHROME LGPS-1101 Per PSO723

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, CHROME MM-4953

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, COPPER AMS-2418

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP09 - PLATING, NICKEL AMS-2424 For re-work only

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

Approved for electroless nickel stripping as per Sumitomo

procedure SMB-644 B.

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP12 - PASSIVATION AMS-2700

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP12 - PASSIVATION ASTM-A-967

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 CP15 - PRE-PENETRANT ETCH AC7108/15

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 HT - HEAT TREAT AMS-2759/1



811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 HT - HEAT TREAT AMS-2759/6 Nitriding

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 HT - HEAT TREAT AMS-H-6875

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 HT - HEAT TREAT AMS-S-6090

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 HT - HEAT TREAT MM-5744

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

811 Sumitomo Precision Products Co. Ltd. (5058) 1-10, Fuso-Cho Amagasaki City Japan Hiroyuki Asakura 81 (06) -6489-5949 SE - SHOT PEEN AMS-2430

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 AQS - QUALITY SYSTEM AC7004

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME AMS-2460

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME AMS-QQ-C-320

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME CPC-8221

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME LGPS-1101

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME MIL-STD-1501

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, CHROME MMC-273

Page (34) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, NICKEL AMS-2403

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, NICKEL AMS-2424

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, NICKEL AMS-QQ-N-290

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP09 - PLATING, NICKEL TM-1179

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 CP14 - STRIPPING, HVOF LGPS-1300

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 HT - STRESS RELIEF AMS-2759/11 Up to 650'F maximum.

813 2014-11-30 Superior Plating Company - CT (4160) Lacey Place Southport CT USA Bill Bodie (203) 255-1501 HT - STRESS RELIEF AMS-H-6875 Up to 650'F maximum.

1481 Superior Plating Inc - CA (4556) 1901 E Cerritos Ave Anaheim CA USA Rosa Martin 714-774-1174 AQS - QUALITY SYSTEM AC7004

1481 Superior Plating Inc - CA (4556) 1901 E Cerritos Ave Anaheim CA USA Rosa Martin 714-774-1174 CP09 - PLATING, NICKEL AMS-QQ-N-290

1481 Superior Plating Inc - CA (4556) 1901 E Cerritos Ave Anaheim CA USA Rosa Martin 714-774-1174 CP09 - PLATING, ZINC NICKEL AMS-2417

814 Superior Thread Rolling Co. 12801 Wentworth Street Arleta CA USA Tom Mundy (818) 504-3626 X235 AQS - QUALITY SYSTEM AS 9100 Thread rolling, see BAC D1-4426.

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 AQS - QUALITY SYSTEM AS 9100

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835



817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 CP15 - PRE-PENETRANT ETCH AC7108/15

817 SURFACE TREATMENT NEDERLAND B.V (6014) Hazenspoor 16 Maasbracht THE NETHERLANDS Jan Delsing (31) 47-546-3835 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 AQS - QUALITY SYSTEM JISQ9100

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 CMSP - GRINDING, CHROME LGPS-7000

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 CMSP - GRINDING, CHROME MIL-STD-866

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1111 Takabayashi Mfg. Co. Ltd. (10827) Ni-25 Kanaimachi Kanazawa Ishikawa Japan Hideki Takabayashi +81-76-258-1340 SE - SHOT PEEN AMS-2430

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 AQS - QUALITY SYSTEM AS 9100

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP01 - COATING, DRY FILM MIL-PRF-46010

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP01 - COATING, PAINT APPLICATION LGPS-1001

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP01 - COATING, PAINT APPLICATION MIL-F-18264

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP12 - PASSIVATION AMS-2700

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 CP15 - PRE-PENETRANT ETCH AC7108/15

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

824 2014-04-08 Taylor Certified Processing, Inc. (5114) 101B Devon Road Brampton Ontario Canada Brett Kinzett (905) 595-1717 SE - SHOT PEEN AMS-2430

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 AQS - QUALITY SYSTEM AS 9100

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP08 - ANODIZE, TITANIUM AMS-2488

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, CHROME AMS-2406

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, CHROME AMS-2460

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, CHROME AMS-QQ-C-320

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, CHROME E.S. 6.131

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, NICKEL AMS-2424

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, NICKEL AMS-QQ-N-290

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, ZINC NICKEL AMS-2417

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP09 - PLATING, ZINC NICKEL E.S. 6.215

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP10 - ELECTROLESS PLATING, NICKEL UltraKoat* *Techmetals proprietary process

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Also capable of Type II (non-hexavalent) chromate conversion.

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP12 - PASSIVATION AMS-2700

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP12 - PASSIVATION AMS-QQ-P-35

1226 2015-09-30 Techmetals, Inc (4210) 345 Springfield Street Dayton OH USA Robert Kraft 937-253-5311 x263 CP12 - PASSIVATION E.S. 6.19

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 AQS - QUALITY SYSTEM AC7004

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CMSP - GRINDING, CHROME LGPS-7000

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CMSP - GRINDING, CHROME MIL-STD-866

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CMSP - GRINDING, CHROME MM-4990 MM-4990-5 valid for AH-64 only

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CMSP - GRINDING, HVOF LGPS-7010

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP01 - COATING, DRY FILM MIL-PRF-46010

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP01 - COATING, DRY FILM MMC-155

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP01 - COATING, PAINT APPLICATION LGPS-1001

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP01 - COATING, PAINT APPLICATION MIL-F-18264

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP02 - TEMPER ETCH INSPECTION AMS-2649

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP02 - TEMPER ETCH INSPECTION LGPS-3000

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8206

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MM-4950

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MMC-250

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM (BRIGHT/LHE) RI-310

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CHROME AMS-2406

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CHROME AMS-2460

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CHROME LGPS-1101

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CHROME MIL-STD-1501

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, CHROME MMC-208

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, NICKEL AMS-2403

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, NICKEL AMS-2424

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, NICKEL MIL-STD-868

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP09 - PLATING, ZINC NICKEL LGPS-1106

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP12 - PASSIVATION AMS-2700

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP12 - PASSIVATION ASTM-A-967

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP12 - TITANIUM CLEANING LGPS-8003

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

Page (35) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP14 - STRIPPING, HVOF LGPS-1300

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CP15 - PRE-PENETRANT ETCH AC7108/15

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 CT - HVOF LGPS-1301

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 HT - STRESS RELIEF AMS-2759

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 HT - STRESS RELIEF AMS-H-6875

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 SE - MANUAL PEENING AMS-2430

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 SE - MANUAL PEENING LGPS-1501

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 SE - SHOT PEEN AMS-2430

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 SE - SHOT PEEN CPC-6400

830 2019-04-23 Tecnickrome Aeronautique Inc. (4760) 12264 April Montreal Quebec Canada Said Amegroud, (514) 640-0333 Ext 289 SE - SHOT PEEN MMC-137

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 AQS - QUALITY SYSTEM AS 9100

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CMSP - GRINDING, CHROME LGPS-7000

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CMSP - GRINDING, CHROME MIL-STD-866

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CMSP - GRINDING, HVOF LGPS-7010

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP02 - TEMPER ETCH INSPECTION AMS-2649

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP02 - TEMPER ETCH INSPECTION LGPS-3000

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP02 - TEMPER ETCH INSPECTION MIL-STD-867

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CHROME AMS-2406



835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CHROME AMS-QQ-C-320

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CHROME E.S. 6.131

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CHROME LGPS-1101

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, CHROME MIL-STD-1501

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, NICKEL AMS-2403

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, NICKEL AMS-2424

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP09 - PLATING, NICKEL MIL-STD-868

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP12 - PASSIVATION AMS-2700

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP14 - STRIPPING, HVOF LGPS-1300

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CP15 - PRE-PENETRANT ETCH AC7108/15

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-021)

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 HT - STRESS RELIEF AMS-2759/11 Stress Relief only

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 HT - STRESS RELIEF AMS-2759/11 Maximum Temperatiure 925°F

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 HT - STRESS RELIEF AMS-H-6875

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 SE - FLAPPER / ROTO PEENING AMS-2590

835 2014-05-20 Tekalia Aeronautik (2010) Inc (7875) 3900 Boul. Tricentenaire Montreal Quebec Canada Jean Caza 514-640-2431 SE - SHOT PEEN AMS-2430

838 Terauchi Manufacturing Co. Ltd. (7864) 666 Yoshinaga-cho Fukakusa Fushimi-ku Kyoto Japan Minoru Kobayashi (81) (075) 642-2662 AQS - QUALITY SYSTEM AS 9100

838 Terauchi Manufacturing Co. Ltd. (7864) 666 Yoshinaga-cho Fukakusa Fushimi-ku Kyoto Japan Minoru Kobayashi (81) (075) 642-2662 HT - HEAT TREAT AMS-2759/3

838 Terauchi Manufacturing Co. Ltd. (7864) 666 Yoshinaga-cho Fukakusa Fushimi-ku Kyoto Japan Minoru Kobayashi (81) (075) 642-2662 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1628 2019-04-30 TFC Manufacturing, Inc. (12866) 4001 Watson Plaza Drive Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 AQS - QUALITY SYSTEM AS 9100

1628 2019-04-30 TFC Manufacturing, Inc. (12866) 4001 Watson Plaza Drive Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 WLD - WELDING AWS-D17.1

1628 2019-04-30 TFC Manufacturing, Inc. (12866) 4001 Watson Plaza Drive Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 WLD - WELDING AWS-D17.2

841 2019-04-30 TFC Manufacturing, Inc. (5570) 3825 Industry Ave. Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 AQS - QUALITY SYSTEM AS 9100

841 2019-04-30 TFC Manufacturing, Inc. (5570) 3825 Industry Ave. Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 HT - HEAT TREAT AMS-2770

841 2019-04-30 TFC Manufacturing, Inc. (5570) 3825 Industry Ave. Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 WLD - WELDING AWS-D17.1

841 2019-04-30 TFC Manufacturing, Inc. (5570) 3825 Industry Ave. Lakewood CA USA Jim Hagani (562)426-9559 EXT 106 WLD - WELDING AWS-D17.2

1498 The Sousa Corp. (3787) 565 Cedar Street Newington CT USA Andrew Sousa 860-523-9090 AQS - QUALITY SYSTEM AS 9100

1498 The Sousa Corp. (3787) 565 Cedar Street Newington CT USA Andrew Sousa 860-523-9090 HT - HEAT TREAT AMS-2759/1





1498 The Sousa Corp. (3787) 565 Cedar Street Newington CT USA Andrew Sousa 860-523-9090 HT - HEAT TREAT AMS-H-6875

1483 Thermi-Garonne (6765) 59 Route de Frouzins Roques Sur Garonne France Paul Drapeau + 33 562873410 AQS - QUALITY SYSTEM AS 9100

1483 Thermi-Garonne (6765) 59 Route de Frouzins Roques Sur Garonne France Paul Drapeau + 33 562873410 HT - HEAT TREAT AMS-2759

1483 Thermi-Garonne (6765) 59 Route de Frouzins Roques Sur Garonne France Paul Drapeau + 33 562873410 HT - HEAT TREAT AMS-2759/1

1483 Thermi-Garonne (6765) 59 Route de Frouzins Roques Sur Garonne France Paul Drapeau + 33 562873410 HT - HEAT TREAT AMS-2759/3

1467 Thoni Alutec Sp. z o.o. (10189) ul.Przyszowska 1 Stalowa Wola Poland Bogusław Piskor 0048 15 814 97 86 AQS - QUALITY SYSTEM AS 9100

Processor approved by UTAS APS for RT (Radiological Inspection)

and PT (LPI).

848 2017-04-30 Tiodize Co., Inc. 15701 Industry Lane Huntington Beach CA USA Terry Parks (714) 902-0513 AQS - QUALITY SYSTEM AS 9100

848 2017-04-30 Tiodize Co., Inc. 15701 Industry Lane Huntington Beach CA USA Terry Parks (714) 902-0513 CP08 - ANODIZE, TITANIUM AMS-2488

APPROVED FOR LS USE UNDER THE CONDITIONS OF D1-4426

AND WHERE TIODIZE IS CALLED OUT AS THE REQUIRED SOURCE

BY ENGINEERING DRAWING NOTE ONLY.

1190 Toko Tekko Co., Ltd (11776) Shakanai Aza Inariyamashita-9 Ohdate-City Akita-Pref Japan Satoshi Kosawa +81-186-48-6311 AQS - QUALITY SYSTEM AS 9100

1190 Toko Tekko Co., Ltd (11776) Shakanai Aza Inariyamashita-9 Ohdate-City Akita-Pref Japan Satoshi Kosawa +81-186-48-6311 CMSP - GRINDING, CHROME LGPS-7000

1190 Toko Tekko Co., Ltd (11776) Shakanai Aza Inariyamashita-9 Ohdate-City Akita-Pref Japan Satoshi Kosawa +81-186-48-6311 CMSP - GRINDING, CHROME MIL-STD-866

145 2019-08-31 TRI-PROCESS Company Inc (4428) 7718 Adams St. Paramount CA USA Shigeru 'Jim' Imaoka (562) 531-7666 AQS - QUALITY SYSTEM AS 9100

145 2019-08-31 TRI-PROCESS Company Inc (4428) 7718 Adams St. Paramount CA USA Shigeru 'Jim' Imaoka (562) 531-7666 SE - MANUAL PEENING AMS-2430

145 2019-08-31 TRI-PROCESS Company Inc (4428) 7718 Adams St. Paramount CA USA Shigeru 'Jim' Imaoka (562) 531-7666 SE - SHOT PEEN AMS-2430

145 2019-08-31 TRI-PROCESS Company Inc (4428) 7718 Adams St. Paramount CA USA Shigeru 'Jim' Imaoka (562) 531-7666 SE - SHOT PEEN CPC-6400

360 2018-05-31 Triumph Actuation Systems - Yakima (3937) 2720 W. Washington Ave. Yakima WA USA Tom Hennessy, Britain Rogers (509) 248-5000 x 252 AQS - QUALITY SYSTEM AS 9100

360 2018-05-31 Triumph Actuation Systems - Yakima (3937) 2720 W. Washington Ave. Yakima WA USA Tom Hennessy, Britain Rogers (509) 248-5000 x 252 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

360 2018-05-31 Triumph Actuation Systems - Yakima (3937) 2720 W. Washington Ave. Yakima WA USA Tom Hennessy, Britain Rogers (509) 248-5000 x 252 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

863 2014-04-30 Triumph Fabrications - Ft. Worth (4651) 7445 East Lancaster Ave. Ft. Worth TX USA Jimmy Kinder 817-451-0620 AQS - QUALITY SYSTEM AS 9100 Bonding per BAC-5514 only

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 AQS - QUALITY SYSTEM AS 9100

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP01 - COATING, PAINT APPLICATION MIL-F-18264

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 CP15 - PRE-PENETRANT ETCH AC7108/15

957 2019-08-31 Triumph Processing – Lynwood (4110) 2605 Industry Way Lynwood CA USA Jess Lozano (323) 563-1338 x2705 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 AQS - QUALITY SYSTEM AC7004

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP09 - PLATING, CHROME AMS-2406

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP09 - PLATING, CHROME AMS-QQ-C-320

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP09 - PLATING, CHROME E.S. 6.131

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP09 - PLATING, CHROME E.S. 6.194

1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118

Page (36) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1423 U.S. Chrome Corp. of Connecticut (7178) 175 Garfield Ave. Stratford CT USA Jeffrey Ballantyne 203-378-9622 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.193

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 AQS - QUALITY SYSTEM AC7004

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP09 - PLATING, CHROME AMS-2406

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP09 - PLATING, CHROME AMS-2460

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP09 - PLATING, CHROME AMS-QQ-C-320

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP09 - PLATING, CHROME E.S. 6.131

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP10 - ELECTROLESS PLATING, NICKEL AMS-2405

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90

1420 2017-03-31 U.S. Chrome Corp. of Ohio (3405) 107 Westboro St. Dayton OH USA Greg Santo 937-224-0548 HT - STRESS RELIEF AMS-2759/11 550°F maximum

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 AQS - QUALITY SYSTEM AS 9100

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP01 - COATING, DRY FILM MIL-PRF-46010

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP01 - COATING, PAINT APPLICATION LGPS-1001

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP01 - COATING, PAINT APPLICATION MIL-F-18264

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MMC-152

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP12 - PASSIVATION AMS-2700

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP12 - PASSIVATION ASTM-A-967

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP13 - PLATING, BRUSH CADMIUM LGPS-1102

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 CP15 - PRE-PENETRANT ETCH AC7108/15

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 SE - FLAPPER / ROTO PEENING AMS-2590

871 2017-05-15 Ultraspec Finishing Inc. (4686) 2600 De Miniac St. Laurent Quebec Canada Houman Zarkesh (514) 337-1782 SE - FLAPPER / ROTO PEENING MIL-R-81841

872 ULTRATECH Sp.zo.o (9278) Fabryczna 4 A Sedziszow Malopolski Sub Carpation POLAND JAKUB PUK +48 17 7174998 AQS - QUALITY SYSTEM AS 9100

872 ULTRATECH Sp.zo.o (9278) Fabryczna 4 A Sedziszow Malopolski Sub Carpation POLAND JAKUB PUK +48 17 7174998 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 AQS - QUALITY SYSTEM AS 9100

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

AMS-A-8625 Type II Class 2 red/fed-std-595 N 11136 or

equivalent

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 CP12 - PASSIVATION AMS-2700

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 CP12 - TITANIUM CLEANING LGPS-8003

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 HT - HEAT TREAT AMS-2759

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 HT - HEAT TREAT AMS-2759/1





873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 HT - HEAT TREAT AMS-H-6875

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 HT - HEAT TREAT MMC-207

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

Pre-penetrant etch capability on-site - lack of accredittaion to

AC7108/15

873 UMBRAGROUP S.P.A. (5269) Zona Ind.le Loc. Paciana FOLIGNO ITALY Marco Ceccarelli 011-39 0742348260 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

884 Universal Aerospace Company (10647) 18640 59th Drive NE Arlington WA USA Martin Evert 360-435-9577 AQS - QUALITY SYSTEM AS 9100

884 Universal Aerospace Company (10647) 18640 59th Drive NE Arlington WA USA Martin Evert 360-435-9577 WLD - WELDING AWS-D17.1

1496 UTAS Power, Controls & Sensing Systems 1007 E. University Drive Phoenix AZ USA Oscar Torres 602-462-2949 AQS - QUALITY SYSTEM AS 9100 Parylene coating for AWB product

1390 UTC Aerospace Systems Wroclaw Sp. z o.o. (5245) ul. Bierutowska 65-67 Wroclaw Poland Greg Czeladko 0048-71-7148014 AQS - QUALITY SYSTEM AS 9100 Processing to GAS specifications only

888 2018-09-19 Vac Developments (5576) 2270 Bristol Circle. Oakville Ontario Canada Augustin Marcu (905) 855-6855 x 267 AQS - QUALITY SYSTEM AS 9100

888 2018-09-19 Vac Developments (5576) 2270 Bristol Circle. Oakville Ontario Canada Augustin Marcu (905) 855-6855 x 267 WLD - WELDING AWS-D17.1

888 2018-09-19 Vac Developments (5576) 2270 Bristol Circle. Oakville Ontario Canada Augustin Marcu (905) 855-6855 x 267 WLD - WELDING MMC-131

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 AQS - QUALITY SYSTEM AS 9100

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT AMS-2759

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT AMS-2759/1







891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT AMS-H-6875

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT AMS-H-81200

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT CP-0360

891 2016-04-08 Vac-Aero International Inc.-Montreal (3421) 7450 Vertie St. St. Laurent Quebec Canada Marco Ciarlo (514) 334-4240 HT - HEAT TREAT MMC-125



890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 AQS - QUALITY SYSTEM AS 9100

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 HT - HEAT TREAT AMS-2670

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 HT - HEAT TREAT AMS-2759

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 HT - HEAT TREAT AMS-2759/1





890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 HT - HEAT TREAT AMS-H-6088



890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 HT - HEAT TREAT LGPS-2000

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 WLD - BRAZING AWS-C3.3

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 WLD - WELDING AWS-D17.1

890 2016-04-08 Vac-Aero International -Oakville (3420) 1371 Speers Rd. Oakville Ontario Canada JOSE FUENTES (905) 827-4171 WLD - WELDING MMC-380

892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 AQS - QUALITY SYSTEM AC7004

892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 HT - HEAT TREAT AMS-2759/1





892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 HT - HEAT TREAT AMS-2801

892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 HT - HEAT TREAT AMS-H-6875

892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 HT - HEAT TREAT AMS-H-81200

892 2014-12-31 Vac-Met Inc. (3422) 7236 Murthum Warren MI USA Steve Choma (586) 264-8100 WLD - BRAZING RI-325 For PN 173946 only.

1421 Valley Plating Inc. (3425) 412 Albany St. Springfield MA USA Timothy Martin 413-788-7375 AQS - QUALITY SYSTEM AC7004

1421 Valley Plating Inc. (3425) 412 Albany St. Springfield MA USA Timothy Martin 413-788-7375 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

1193 Vandergriff Technologies NDT Services (4524) 4209 Murray Ave. Ft. Worth TX USA Venicia Queen 817-485-1248 AQS - QUALITY SYSTEM AC7004 Ultrasonic Inspections per BAC5439

1193 Vandergriff Technologies NDT Services (4524) 4209 Murray Ave. Ft. Worth TX USA Venicia Queen 817-485-1248 NDT - INSPECTION, ULTRASONIC AMS-2631

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 AQS - QUALITY SYSTEM AS 9100

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, DRY FILM E.S. 6.64

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, DRY FILM MIL-PRF-46010

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, PAINT APPLICATION E.S. 6.122

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, PAINT APPLICATION LGPS-1001

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, PAINT APPLICATION MIL-PRF-22750

Page (37) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP01 - COATING, PAINT APPLICATION MIL-PRF-85582

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) E.S. 6.16.1 Type 1

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 TYPE IB, CLASS 1 (Low Voltage Process)

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Type-II & IIB, Class-1

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP12 - PASSIVATION AMS-2700 Method-1 Type-2,4,6,7,8

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP12 - PASSIVATION ASTM-A-380

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP12 - PASSIVATION ASTM-A-967 Method-1 Nitric-1, Nitric-2, Nitric-3, Nitric-4

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP12 - PASSIVATION E.S. 6.19

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 CP15 - PRE-PENETRANT ETCH AC7108/15

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

1392 Vijaya Metal Finishers (8870) 365 10th Cross IV Phase Bangalore Kametake India 080 28361282 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

202 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) MARIAZELLERSTRAUSSE 25 KAPFENBERG AUSTRIA Manfred Gruber 43- 3862 20-6583 AQS - QUALITY SYSTEM AS 9100

202 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) MARIAZELLERSTRAUSSE 25 KAPFENBERG AUSTRIA Manfred Gruber 43- 3862 20-6583 HT - HEAT TREAT AMS-H-6875

202 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) MARIAZELLERSTRAUSSE 25 KAPFENBERG AUSTRIA Manfred Gruber 43- 3862 20-6583 HT - HEAT TREAT AMS-H-81200

202 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) MARIAZELLERSTRAUSSE 25 KAPFENBERG AUSTRIA Manfred Gruber 43- 3862 20-6583 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 AQS - QUALITY SYSTEM AS 9100

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP01 - COATING, DRY FILM MIL-L-23398

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP01 - COATING, DRY FILM MIL-PRF-46010

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP01 - COATING, DRY FILM MIL-PRF-81329

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP01 - COATING, PAINT APPLICATION MIL-F-18264

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP12 - PASSIVATION AMS-2700

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP12 - PASSIVATION E.S. 6.19

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 CP15 - PRE-PENETRANT ETCH AC7108/15

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

902 Voss Industries (3430) 2168 West 25th Street Cleveland OH USA Scott Minadeo (216) 771-7655 x304 WLD - WELDING AWS-D17.2

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 AQS - QUALITY SYSTEM AS 9100

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 CP12 - TITANIUM CLEANING ASTM-B-600 Limited to in-house use only.

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 CP12 - TITANIUM CLEANING LGPS-8003

Limited to in-house use only, processing as per LGPS8003 ECPR

103519

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 CP15 - PRE-PENETRANT ETCH AC7108/15

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 HT - HEAT TREAT AMS-2801

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 HT - HEAT TREAT AMS-H-81200

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 NDT - INSPECTION, ULTRASONIC AMS-2631

904 VSMPO-AVISMA Corporation (4653) 1, PARKOVAYA STREET VERKHNAYA SALDA SVERDLOVSK REGION RUSSIA Natalia Soboleva. (3-43-45) 2-14-05 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 AQS - QUALITY SYSTEM AS 9100

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT AMS-2759/1

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT AMS-2759/2

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT AMS-2772 Approved for Stress Relief only

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT AMS-H-6875

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT LGPS-2000

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT LGPS-2001 Approved for LGPS 2001 for furnace #14 and #21 only.

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - HEAT TREAT MM-4990

905 VTN WITTEN (5170) RUSBERGSTRSSE 75 WITTEN GERMANY Christoph Wierhake 49 23 2493 42-24 HT - STRESS RELIEF AMS-2759/11

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 AQS - QUALITY SYSTEM AS 9100

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 HT - HEAT TREAT AMS-2770

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 HT - HEAT TREAT AMS-H-6875

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 HT - HEAT TREAT BP-106 In-house support for cycle anneal of forgings

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 HT - HEAT TREAT LGPS-2002 In-house support for forgings.

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

906 2017-12-31 W Pat Crow Forgings (4177) 200 Luxton Street Ft. Worth TX USA Brandi Lindsey (817) 531-2196 NDT - PRE-PENETRANT ETCH AC7108/15

1598 2018-10-31 Weatherford Aerospace, LLC (4812) 610 West Third Street Weatherford TX USA Dean Klix 817.594.8419 AQS - QUALITY SYSTEM AS 9100

1598 2018-10-31 Weatherford Aerospace, LLC (4812) 610 West Third Street Weatherford TX USA Dean Klix 817.594.8419 CP05 - CHEMICAL MILLING LGPS-8003

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 AQS - QUALITY SYSTEM AS 9100

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 HT - HEAT TREAT AMS-2759/11 995°F max.

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 HT - HEAT TREAT AMS-2770

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 HT - HEAT TREAT AMS-2772

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 HT - HEAT TREAT E.S. 5.14.26

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 NDT - INSPECTION, ULTRASONIC AMS-STD-2154

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 NDT - INSPECTION, ULTRASONIC ASTM-B-594

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 NDT - INSPECTION, ULTRASONIC CPC-9104

912 2018-04-30 Weber Metals, Inc. (4218) 16706 Garfield Ave. Paramount CA USA Andrew Hodges (562) 602-0260 x320 NDT - PRE-PENETRANT ETCH AC7108/15

1158 Wellman Dynamics (3128) 1746 Commerce Rd. Creston IA USA Angie Swedlund 641-782-0300 AQS - QUALITY SYSTEM AS 9100

1158 Wellman Dynamics (3128) 1746 Commerce Rd. Creston IA USA Angie Swedlund 641-782-0300 HT - HEAT TREAT AMS-2771 Part number 295W1402-3, internal support only

1158 Wellman Dynamics (3128) 1746 Commerce Rd. Creston IA USA Angie Swedlund 641-782-0300 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Part number 295W1402-3, internal support only

1158 Wellman Dynamics (3128) 1746 Commerce Rd. Creston IA USA Angie Swedlund 641-782-0300 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Part number 295W1402-3, internal support only

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 AQS - QUALITY SYSTEM AC7004

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP01 - COATING, DRY FILM MIL-PRF-46010

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP01 - COATING, PAINT APPLICATION MIL-F-18264

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP08 - ANODIZE, TITANIUM AMS-2488

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CADMIUM (BRIGHT/LHE) RI-310

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CHROME AMS-2460

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, CHROME AMS-QQ-C-320

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, COPPER AMS-2418

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, COPPER MMC-254

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, NICKEL AMS-2403

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, NICKEL AMS-2424

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP09 - PLATING, ZINC NICKEL AMS-2417

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716



915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-C-13924

Page (38) of (128)


Printed: 12/14/2018

Proc #DDTC Exp Date


915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP12 - PASSIVATION AMS-2700

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP12 - PASSIVATION ASTM-A-967

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP12 - TITANIUM CLEANING ASTM-B-600

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 HT - STRESS RELIEF AMS-2759/11 Up to 1000 degrees F only.

915 2018-10-31 Westfield Electroplating (3443) 68 NORTH ELM ST. WESTFIELD MA USA KEVEN KUDELKA (413) 568-3716 HT - STRESS RELIEF AMS-H-6875

1334 White Engineering Surfaces Corp. (9444) 1 Pheasant Run Newtown PA USA Thomas Kluge 215-968-5021 X161 AQS - QUALITY SYSTEM AC7004

1334 White Engineering Surfaces Corp. (9444) 1 Pheasant Run Newtown PA USA Thomas Kluge 215-968-5021 X161 CT - HVOF AMS-2447 AWB product only

1334 White Engineering Surfaces Corp. (9444) 1 Pheasant Run Newtown PA USA Thomas Kluge 215-968-5021 X161 CT - HVOF E.S. 6.164 Wescoat Process C-16 Rev. 2

1334 White Engineering Surfaces Corp. (9444) 1 Pheasant Run Newtown PA USA Thomas Kluge 215-968-5021 X161 CT - PLASMA ARC SPRAY AMS-7875 AWB product only

1422 Winston Heat Treating Inc. (3910) 711 E. 2nd St. Dayton OH USA Dennis Burkes 937-226-0110 AQS - QUALITY SYSTEM AC7004

1422 Winston Heat Treating Inc. (3910) 711 E. 2nd St. Dayton OH USA Dennis Burkes 937-226-0110 HT - HEAT TREAT AMS-2759/1








1422 Winston Heat Treating Inc. (3910) 711 E. 2nd St. Dayton OH USA Dennis Burkes 937-226-0110 HT - HEAT TREAT AMS-H-6875

1422 Winston Heat Treating Inc. (3910) 711 E. 2nd St. Dayton OH USA Dennis Burkes 937-226-0110 HT - HEAT TREAT E.S. 5.14.2

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 AQS - QUALITY SYSTEM AS 9100

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 HT - HEAT TREAT AMS-2770

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 HT - HEAT TREAT AMS-H-6875

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 HT - HEAT TREAT AMS-H-81200

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

931 2015-02-28 Wyman-Gordon - MA (3454) 244 WORCESTER ST. NORTH GRAFTON MA USA Jeff Zielinski 508-714-6585 NDT - PRE-PENETRANT ETCH AC7108/15

1457 Wyman-Gordon-SC (12283) 152 Caldwell Drive Dillon SC USA Jeff Zielinski

843-506-8463; mobile 508-714-

8328 AQS - QUALITY SYSTEM AC7004


843-506-8463; mobile 508-714-

8328 CP15 - PRE-PENETRANT ETCH AC7108/15


843-506-8463; mobile 508-714-



843-506-8463; mobile 508-714-



843-506-8463; mobile 508-714-



843-506-8463; mobile 508-714-

8328 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao AQS - QUALITY SYSTEM AS 9100

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP09 - PLATING, CHROME AMS-2460

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP09 - PLATING, CHROME E.S. 6.131

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP09 - PLATING, ZINC ASTM-B-633

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP10 - ELECTROLESS PLATING, NICKEL AMS-2404

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP12 - PASSIVATION AMS-2700

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao CP12 - PASSIVATION E.S. 6.19

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao HT - HEAT TREAT AMS-2759/1

1500 Xi'an Aviation Brake Technology Co (8467) No.48 Xicheng Zone Xing ping Shaanxi China Xing Gao HT - HEAT TREAT AMS-2759/3

934 2014-06-30 XRI Testing - Cleveland (3467) 5403 E. Schaaf Road Cleveland OH USA Tina Rose (216) 642-0100 AQS - QUALITY SYSTEM AS 9100

934 2014-06-30 XRI Testing - Cleveland (3467) 5403 E. Schaaf Road Cleveland OH USA Tina Rose (216) 642-0100 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site

934 2014-06-30 XRI Testing - Cleveland (3467) 5403 E. Schaaf Road Cleveland OH USA Tina Rose (216) 642-0100 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

934 2014-06-30 XRI Testing - Cleveland (3467) 5403 E. Schaaf Road Cleveland OH USA Tina Rose (216) 642-0100 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742

935 XRI Testing - Troy (3464) 1961 Thunderbird Troy MI USA Rich Kline (248) 244-1533 AQS - QUALITY SYSTEM AS 9100

935 XRI Testing - Troy (3464) 1961 Thunderbird Troy MI USA Rich Kline (248) 244-1533 CP12 - PASSIVATION AMS-2700

1112 Yura Sansho Co., Ltd. (10859) 1-2-25 Kobayashi-higashi Taisho-ku Osaka Japan Nakamura Shinichi +81 (6) 4394-5333 AQS - QUALITY SYSTEM JISQ9100

1112 Yura Sansho Co., Ltd. (10859) 1-2-25 Kobayashi-higashi Taisho-ku Osaka Japan Nakamura Shinichi +81 (6) 4394-5333 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 No pre-penetrant etch capability on-site.

1112 Yura Sansho Co., Ltd. (10859) 1-2-25 Kobayashi-higashi Taisho-ku Osaka Japan Nakamura Shinichi +81 (6) 4394-5333 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

1080 zzz do not use Firth Rixson Forgings Ltd (4152) Meadowhall Road Sheffield South Yorkshire UK Michael Baldwin +44 (0) 114 219 3314 AQS - QUALITY SYSTEM AS 9100 Processing to Boeing specifications per D1-4426

1080 zzz do not use Firth Rixson Forgings Ltd (4152) Meadowhall Road Sheffield South Yorkshire UK Michael Baldwin +44 (0) 114 219 3314 HT - HEAT TREAT AMS-H-6875

1080 zzz do not use Firth Rixson Forgings Ltd (4152) Meadowhall Road Sheffield South Yorkshire UK Michael Baldwin +44 (0) 114 219 3314 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444

Page (39) of (128)

UTAS Landing GearDocument 200 Approved Processors - Revisions

Printed: 12/14/2018

Change Date Supplier Special Process Spec Reference Changed To Change Reason

12/13/2018 0:00 Accurate Steel Treating Inc (9860) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

12/13/2018 0:00 Accurate Steel Treating Inc (9860) HT - HEAT TREAT AMS-2759/1 Approved Spec Added








12/13/2018 0:00 Accurate Steel Treating Inc (9860) HT - HEAT TREAT AMS-2801 Approved Spec Added

12/13/2018 0:00 Accurate Steel Treating Inc (9860) HT - HEAT TREAT AMS-H-81200 Approved Spec Added




12/13/2018 0:00 Accurate Steel Treating Inc (9860) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

12/13/2018 0:00 Accurate Steel Treating Inc (9860) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

12/12/2018 0:00 Sunvair Inc (8883) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

12/12/2018 0:00 Sunvair Inc (8883) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

12/12/2018 0:00 Active Magnetic Inspection (3099) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

12/12/2018 0:00 Active Magnetic Inspection (3099) CP12 - PASSIVATION AMS-2700 Approved Spec Added

12/12/2018 0:00 Active Magnetic Inspection (3099) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

12/12/2018 0:00 Active Magnetic Inspection (3099) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/12/2018 0:00 Active Magnetic Inspection (3099) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

12/7/2018 0:00 Impresa Aerospace, LLC (10372) CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Approved Spec Added

12/7/2018 0:00 Impresa Aerospace, LLC (10372) CP08 - ANODIZE ALUMINUM - NON-CHROMIC (TYPE IC) MIL-A-8625 Approved Spec Added

12/7/2018 0:00 Impresa Aerospace, LLC (10372) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

11/29/2018 0:00 Anodic Inc. (3038) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Modification

11/29/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Modification

11/28/2018 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, TIN MIL-T-10727 Approved Spec Added

11/28/2018 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, TIN ASTM-B-545 Approved Spec Added

11/28/2018 0:00 W Pat Crow Forgings (4177) HT - HEAT TREAT LGPS-2002 Approved Spec Added

11/28/2018 0:00 Sunvair Inc (8883) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/27/2018 0:00 BODYCOTE Western & Southern Europe (6820) HT - HEAT TREAT E.S.-13.104 Approved Spec Added

Page (40) of (128)


Printed: 12/14/2018

11/27/2018 0:00 BODYCOTE Western & Southern Europe (6820) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

11/27/2018 0:00 BODYCOTE Western & Southern Europe (6820) AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

11/27/2018 0:00 Bodycote Hot Isostatic Pressing (11031) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/27/2018 0:00 Art Brass Aerospace Finishing (11279) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

11/27/2018 0:00 Art Brass Aerospace Finishing (11279) CP12 - PASSIVATION AMS-2700 Approved Spec Added

11/27/2018 0:00 Bodycote Hot Isostatic Pressing (11031) HT - HOT ISOSTATIC PRESSURE E.S. 13.104 Approved Spec Added

11/9/2018 0:00 TM Stewart Inc NA - COATING, VACUUM IMPREGNATED CHROME CPC-8220 Inactive Spec Removed

11/9/2018 0:00 TM Stewart Inc NA - COATING, VACUUM IMPREGNATED CHROME MIL-STD-276 Inactive Spec Removed

11/9/2018 0:00 TM Stewart Inc AQS - QUALITY SYSTEM MIL-I-45208 Inactive Spec Removed

10/31/2018 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Spec Removed

10/22/2018 0:00 BODYCOTE Western Europe (5241) HT - HEAT TREAT E.S. 21.9 Approved Spec Added

10/5/2018 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

10/4/2018 0:00 Electro-Kut Inc.(4625) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/4/2018 0:00 Electro-Kut Inc.(4625) NM - EDM (Electro Discharge Machining) N/A Approved Spec Added

10/3/2018 0:00 Aerospace Metal Finishing (4994) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

9/27/2018 0:00 All Metals Processing of Orange County, LLC (3320) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

9/27/2018 0:00 All Metals Processing of Orange County, LLC (3320) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

9/19/2018 0:00 Davro (11036) AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

9/19/2018 0:00 Davro (11036) CP12 - PASSIVATION AMS-2700 Not Approved Spec Removed

9/12/2018 0:00 Industrial Tectonics Bearings Inc. (4100) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification

9/12/2018 0:00 Industrial Tectonics Bearings Inc. (4100) HT - HEAT TREAT AMS-2759/2 Approved Spec Added



9/12/2018 0:00 Industrial Tectonics Bearings Inc. (4100) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

9/12/2018 0:00 E.M.E. Inc. (4111) CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Added

9/12/2018 0:00 ILCO Industries (5334) WLD - WELDING AWS-D17.1 Approved Spec Modification

9/11/2018 0:00 TFC Manufacturing, Inc. (5570) WLD - WELDING AWS-D17.2 Approved Spec Added

9/11/2018 0:00 TFC Manufacturing, Inc. (5570) HT - HEAT TREAT AMS-2770 Approved Spec Added

9/11/2018 0:00 TFC Manufacturing, Inc. (12866) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added



9/3/2018 0:00 GALVAIR srl, (7419) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

9/3/2018 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 Hohman Plating & Mfg., Inc. (3175) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 International Hardcoat Inc. (3259) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 Poly Metal Finishing, Inc. (3705) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 Westfield Electroplating (3443) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

8/31/2018 0:00 Westfield Electroplating (3443) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 Imagineering Finishing Technologies (3203) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

8/31/2018 0:00 Imagineering Finishing Technologies (3203) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/31/2018 0:00 REM Surface Engineering AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/31/2018 0:00 REM Surface Engineering NA - ISOTROPIC SUPERFINISHING E.S. 6.206 Approved Spec Added

8/30/2018 0:00 Embee Processing, LLC. (3337) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT LGPS-2002 Approved Spec Added

8/30/2018 0:00 AAA Plating & Inspection, Inc. (4342) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 Asko Processing, Inc. (3049) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

Page (41) of (128)


Printed: 12/14/2018

8/30/2018 0:00 Barry Avenue Plating (3067) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 Blanchard Metals Processing Co. (4569) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 Hixson Metal Finishing (3174) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 K&L Anodizing (4908) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 PAS Technologies - Phoenix (3378) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/30/2018 0:00 PAS Technologies - Phoenix (3378) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

8/30/2018 0:00 Embee Processing, LLC. (3337) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

8/29/2018 0:00 S&L Aerospace Metals LLC (3756) CMSP - GRINDING, CHROME LGPS-7000 Pulled Spec Removed

8/29/2018 0:00 S&L Aerospace Metals LLC (3756) CMSP - GRINDING, CHROME MIL-STD-866 Pulled Spec Removed

8/24/2018 0:00 Nassau Chrome Plating (4972) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, THIN DENSE CHROME AMS-2438 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP11 - CONVERSION COATING, ALUMINUM, NON-HEX CHR MIL-DTL-5541 Type II Approved Spec Added

8/24/2018 0:00 Nassau Chrome Plating (4972) CP12 - PASSIVATION AMS-2700 Approved Spec Added

8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) AQS - QUALITY SYSTEM EN9100 Approved Spec Added

8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) HT - HEAT TREAT AMS-2774 Approved Spec Added

8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) HT - HEAT TREAT AMS-5629 Approved Spec Added

8/21/2018 0:00 Aeroprocess TTT SA de CV (12744) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/21/2018 0:00 E/M Coating Services (3640) CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Modification

8/20/2018 0:00 Babcock Welding Co., Inc. (5469) AQS - QUALITY SYSTEM AC7004 Approved Spec Removed

8/16/2018 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, SILVER AMS-2412 Approved Spec Added

8/10/2018 0:00 Bodycote Thermal Processing - Elkhart (8654) HT - HEAT TREAT E.S. 5.14.30 Approved Spec Added

8/9/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416 Approved Spec Added

8/9/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, NICKEL - Cadmium Diffused E.S. 5.18 Approved Spec Added

8/9/2018 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

8/9/2018 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

8/9/2018 0:00 Imagineering Finishing Technologies (3203) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90 Approved Spec Added

8/9/2018 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT AMS-5659 Approved Spec Added

8/9/2018 0:00 Metal Improvement Co. - Addison (5455) SE - SHOT PEEN E.S 5.30 Approved Spec Added

Page (42) of (128)


Printed: 12/14/2018

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - MANUAL PEENING AMS-2430 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) CP15 - PRE-PENETRANT ETCH AC7108/15 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) CP02 - TEMPER ETCH INSPECTION AMS-2649 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) HT - STRESS RELIEF AMS-2759/11 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) HT - STRESS RELIEF AMS-H-6875 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN PS-1201 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN MMC-137 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN CP-0340 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN AMS-2430 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN CPC-6400 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN BP-105 Inactive Spec Removed

8/2/2018 0:00 METAL IMPROVEMENT CO. - Long Island (9990) SE - SHOT PEEN AMS-S-13165 Inactive Spec Removed

7/31/2018 0:00 Blackies Grinding Service (14427) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

7/31/2018 0:00 Blackies Grinding Service (14427) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

7/31/2018 0:00 Blackies Grinding Service (14427) AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

7/30/2018 0:00 Plating Perceptions, Inc. (4563) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

7/27/2018 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

7/27/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/27/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP12 - PASSIVATION AMS-2700 Approved Spec Added

7/27/2018 0:00 Amitronics Pvt. Ltd. (9222) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Removed

7/27/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

7/26/2018 0:00 M/s Therelek Engineers Private Limited (5999) HT - HEAT TREAT AMS-2770 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Approved Spec Added

7/26/2018 0:00 Curtiss Wright Surface Technologies India Pvt Ltd (11527) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/26/2018 0:00 Curtiss Wright Surface Technologies India Pvt Ltd (11527) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

7/26/2018 0:00 Aerospace Processing India Pvt. Ltd. (API) (9772) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/19/2018 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - PASSIVATION ASTM-A-380 Approved Spec Added

7/19/2018 0:00 HPF S.r.l. (11729) HT - HEAT TREAT AMS-2759/5 Inactive Spec Removed

7/18/2018 0:00 HTG Hi Tech Aero (3196) HT - HEAT TREAT AMS-5678 Approved Spec Added

7/18/2018 0:00 HTG Hi Tech Aero (3196) HT - HEAT TREAT AMS-5737 Approved Spec Added

7/17/2018 0:00 Voss Industries (3430) CP01 - COATING, DRY FILM MIL-PRF-81329 Approved Spec Added

7/17/2018 0:00 Voss Industries (3430) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

7/17/2018 0:00 Anoplate Corp. (4719) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

Page (43) of (128)


Printed: 12/14/2018

7/17/2018 0:00 Pioneer Metal Finishing - South Bend CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Approved Spec Added

7/9/2018 0:00 Southwest United Industries, Inc. (4185) CT - STRIPPING, HVOF LGPS-1300 Approved Spec Modification

7/5/2018 0:00 M/s Therelek Engineers Private Limited (5999) HT - HEAT TREAT AMS-2759 Approved Spec Added

7/5/2018 0:00 M/s Therelek Engineers Private Limited (5999) HT - HEAT TREAT AMS-2759/1 Approved Spec Added






7/5/2018 0:00 M/s Therelek Engineers Private Limited (5999) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

7/5/2018 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

7/5/2018 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

7/5/2018 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

7/5/2018 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

7/5/2018 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/5/2018 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, PAINT APPLICATION E.S. 6.122 Approved Spec Added

7/5/2018 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, PAINT APPLICATION MIL-PRF-22750 Approved Spec Added

7/5/2018 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, PAINT APPLICATION MIL-PRF-85582 Approved Spec Added

7/5/2018 0:00 M/s Therelek Engineers Private Limited (5999) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP12 - PASSIVATION AMS-2700 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.193 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2018 0:00 Amitronics Pvt. Ltd. (9222) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

6/28/2018 0:00 Modern Metal Finishing Inc (8492) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/28/2018 0:00 Modern Metal Finishing Inc (8492) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

6/27/2018 0:00 Amitronics Pvt. Ltd. (9222) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

6/27/2018 0:00 Amitronics Pvt. Ltd. (9222) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

6/27/2018 0:00 Amitronics Pvt. Ltd. (9222) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

6/27/2018 0:00 Amitronics Pvt. Ltd. (9222) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/26/2018 0:00 Chemtron Anodize Co. (5657) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/20/2018 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CT - HVOF E.S. 6.195 Approved Spec Modification

6/20/2018 0:00 HITEMCO (3173) CT - HVOF E.S. 6.195 Approved Spec Modification

6/20/2018 0:00 Pelcoat LLC dba Nation Coating Systems (10545) CT - HVOF E.S. 6.195 Approved Spec Modification

6/19/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

6/14/2018 0:00 W Pat Crow Forgings (4177) HT - HEAT TREAT BP-106 Approved Spec Added

6/11/2018 0:00 Westfield Electroplating (3443) CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

6/8/2018 0:00 Bodycote Thermal Processing - Worchester (6018) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

6/8/2018 0:00 Acuren Inspection, Inc. (3417) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

6/4/2018 0:00 Doncasters Settas (7304) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/4/2018 0:00 Doncasters Settas (7304) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

5/29/2018 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/29/2018 0:00 Cyclone Polska sp. z o. o. (15730) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

5/29/2018 0:00 Cyclone Polska sp. z o. o. (15730) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

Page (44) of (128)


Printed: 12/14/2018

5/24/2018 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Approved Spec Modification

5/22/2018 0:00 Fokker Landing Gear B.V. (7454) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

5/18/2018 0:00 AeroTek Manufacturing Limited - CAD (4434) CP07 - IVD, ALUMINUM AMS-2427 Approved Spec Modification

5/18/2018 0:00 AeroTek Manufacturing Limited - CAD (4434) CP07 - IVD, ALUMINUM MIL-DTL-83488 Approved Spec Modification

5/17/2018 0:00 Magellan Aerospace Processing - New York (4250) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 METAL IMPROVEMENT CO. - Blue Ash (4724) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 METAL IMPROVEMENT CO. - Twinsburg (5229) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 National Peening - OH (11488) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Hydro Honing D/B/A Peening Tech. of CT (4068) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 3P Processing, Inc. (3310) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Abrasive Finishing Co. (5490) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Asko Processing, Inc. (3049) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Esterline Hytek Finishes (4508) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Goodrich Landing Systems - Burlington (4420) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Industrial Metal Finishing (5712) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Metal Finishing Co. - McLean (3499) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Metal Improvement Co. - Grand Prairie (5535) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Metal Improvement Co. - Phoenix (4834) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 National Shot Peening Inc. (4558) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Peen-Rite Inc (5311) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Protective Coatings, Inc. (4566) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Southwest United Industries, Inc. (4185) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 TRI-PROCESS Company Inc (4428) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Southwest United Galnik SA de CV (10581) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Aerosphere Inc. (8507) SE - SHOT PEEN AMS-2430 Approved Spec Added

5/17/2018 0:00 Metal Improvement Co. - Brampton (5532) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Southwest United Canada Inc.(4197) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Tecnickrome Aeronautique Inc. (4760) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/17/2018 0:00 Metal Spray Concepts (10719) SE - MANUAL PEENING AMS-2430 Approved Spec Added

5/16/2018 0:00 Southwest United Industries, Inc. (4185) SE - FLAPPER / ROTO PEENING AMS-2590 Inactive Spec Removed

5/10/2018 0:00 Mistras Services Inc (3242) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

5/7/2018 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) NDT - INSPECTION, LIQUID PENETRANT E.S. 10.70 Approved Spec Added

5/3/2018 0:00 DRT Power Systems - Sidney, LLC CMSP - GRINDING, HVOF AMS-2449 Approved Spec Added

5/1/2018 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, ZINC NICKEL LGPS-1106 Approved Spec Added

5/1/2018 0:00 Aerospace Metal Finishing (4994) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Removed

5/1/2018 0:00 Aerospace Metal Finishing (4994) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Inactive Spec Removed

4/27/2018 0:00 Anoplate Corp. (4719) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) E.S. 6.16 Approved Spec Added

4/27/2018 0:00 Anoplate Corp. (4719) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

4/27/2018 0:00 General Magnaplate Corp. (4571) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

4/26/2018 0:00 Voss Industries (3430) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

4/25/2018 0:00 Ogden Air Logistics (Hill AFB) CP15 - PRE-PENETRANT ETCH See limitations Approved Spec Added

4/20/2018 0:00 Aremac Heat Treating (3044) HT - HEAT TREAT AMS-S-6090 Superceded Spec Removed

4/19/2018 0:00 Metal Surfaces Inc. (3501) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

4/18/2018 0:00 Certified Steel Treating Corp. (4256) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




Page (45) of (128)


Printed: 12/14/2018



4/18/2018 0:00 Certified Steel Treating Corp. (4256) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/18/2018 0:00 Dynachrome (9226) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

4/18/2018 0:00 Dynachrome (9226) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

4/18/2018 0:00 Dynachrome (9226) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added



4/16/2018 0:00 Har-Conn Chrome Co (3159) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232 Approved Spec Added

4/16/2018 0:00 Westfield Electroplating (3443) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

4/16/2018 0:00 Westfield Electroplating (3443) CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

4/16/2018 0:00 Anoplate Corp. (4719) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP01 - COATING, DRY FILM MIL-L-81329 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP12 - PASSIVATION ASTM-A-380 Approved Spec Added

4/16/2018 0:00 Har-Conn Chrome Co (3159) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

4/16/2018 0:00 Westfield Electroplating (3443) HT - STRESS RELIEF AMS-H-6875 Approved Spec Removed

4/12/2018 0:00 Interface Welding (5594) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/11/2018 0:00 Esterline Hytek Finishes (4508) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

4/11/2018 0:00 Esterline Hytek Finishes (4508) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

4/6/2018 0:00 Imagineering Finishing Tech Indianapolis (9809) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/6/2018 0:00 Imagineering Finishing Tech Indianapolis (9809) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

4/6/2018 0:00 Imagineering Finishing Tech Indianapolis (9809) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

4/6/2018 0:00 Imagineering Finishing Tech Indianapolis (9809) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

4/6/2018 0:00 Techmetals, Inc (4210) CP10 - ELECTROLESS PLATING, NICKEL UltraKoat* Approved Spec Added

Page (46) of (128)


Printed: 12/14/2018

4/6/2018 0:00 Westmoreland Mechanical Testing (3445) NA - LABORATORY / TESTING AC7122 Approved Spec Added

4/6/2018 0:00 Techmetals, Inc (4210) CP09 - PLATING, ZINC NICKEL E.S. 6.215 Approved Spec Added

4/5/2018 0:00 Hohman Plating & Mfg., Inc. (3175) CP01 - COATING, DRY FILM E.S. 6.156 Approved Spec Added

4/4/2018 0:00 Southwest United Canada Inc.(4197) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

4/4/2018 0:00 Southwest United Canada Inc.(4197) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

4/4/2018 0:00 Noranco – Vaughan Division (12266) CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

4/3/2018 0:00 Blue Streak Finishers (4405) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

3/29/2018 0:00 Interface Welding (5594) WLD - WELDING LGPS-5002 Approved Spec Modification

3/29/2018 0:00 Rex Heat Treat (3749) HT - HEAT TREAT AMS-2759/4 Approved Spec Added

3/29/2018 0:00 Rex Heat Treat (3749) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

3/29/2018 0:00 AMZ Manufacturing (8745) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

3/28/2018 0:00 SPS Technologies/Aerospace Products (3799) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/28/2018 0:00 SPS Technologies/Aerospace Products (3799) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/28/2018 0:00 METAL IMPROVEMENT CO. - Newbury (4526) AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

3/28/2018 0:00 METAL IMPROVEMENT CO. - Newbury (4526) SE - SHOT PEEN AMS-2430 Inactive Spec Removed

3/23/2018 0:00 Taylor Certified Processing, Inc. (5114) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/21/2018 0:00 Fokker Landing Gear B.V. (7454) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Added

3/19/2018 0:00 National Rivet & Mfg Co HT - STRESS RELIEF AS-7235 Approved Spec Added

3/9/2018 0:00 U.S. Chrome Corp. of Connecticut (7178) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

3/9/2018 0:00 U.S. Chrome Corp. of Connecticut (7178) CP09 - PLATING, CHROME E.S. 6.194 Approved Spec Added

3/9/2018 0:00 U.S. Chrome Corp. of Connecticut (7178) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.193 Approved Spec Added

3/9/2018 0:00 U.S. Chrome Corp. of Connecticut (7178) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118 Approved Spec Added

3/7/2018 0:00 E.M.E. Inc. (4111) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/7/2018 0:00 Aerocom Inspection Service Ltd (3111) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/7/2018 0:00 Aluminum Precision Products - Santa Ana - Susan (7728) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/7/2018 0:00 Aluminum Precision Products - Santa Ana - Susan (7728) HT - HEAT TREAT AMS-2772 Approved Spec Added

3/7/2018 0:00 Aluminum Precision Products - Santa Ana - Susan (7728) HT - HEAT TREAT AMS-H-6088 Approved Spec Added

3/7/2018 0:00 Aluminum Precision Products - Santa Ana - Susan (7728) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/7/2018 0:00 Aluminum Precision Products - Santa Ana - Susan (7728) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/6/2018 0:00 Micro-Tronics Inc. (7061) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/6/2018 0:00 Micro-Tronics Inc. (7061) NM - EDM (Electro Discharge Machining) N/A Approved Spec Added

3/5/2018 0:00 CAMETOID TECHNOLOGIES, INC. CP07 - IVD, ALUMINUM MIL-DTL-83488 Inactive Spec Removed

3/5/2018 0:00 CAMETOID TECHNOLOGIES, INC. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

Page (47) of (128)


Printed: 12/14/2018

3/2/2018 0:00 Heroux Devtek - Longueuil CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8215 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CHROME MIL-STD-1501 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil SE - SHOT PEEN AMS-2430 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil SE - SHOT PEEN CPC-6400 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil HT - STRESS RELIEF AMS-H-6875 Inactive Spec Removed

3/2/2018 0:00 Heroux Devtek - Longueuil CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

3/2/2018 0:00 Mistras Services - Cudahy (3144) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Mitchell Laboratories (3214) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 North East Finishing Co (4560) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Omni Metal Finishing Inc. (3241) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Orbit Industries (3243) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Pacific Magnetic & Penetrant Co., Inc. (3251) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 PAS Technologies - Kansas City (5202) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 PAS Technologies - Phoenix (3378) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 PCC Structurals – San Leandro (3456) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Protective Coatings, Inc. (4566) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Quality Aluminum Forge (4427) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Selmet Inc (3763) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Sifco Forge Group (3777) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Smiths Tubular Systems - Laconia (3303) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Southwest United Canada Inc.(4197) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Southwest United Galnik SA de CV (10581) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Southwest United Industries, Inc. (4185) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Taylor Certified Processing, Inc. (5114) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Tecnickrome Aeronautique Inc. (4760) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Tekalia Aeronautik (2010) Inc (7875) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Triumph Processing – Lynwood (4110) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Ultraspec Finishing Inc. (4686) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

Page (48) of (128)


Printed: 12/14/2018

3/2/2018 0:00 Vijaya Metal Finishers (8870) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Voss Industries (3430) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 VSMPO-AVISMA Corporation (4653) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 W Pat Crow Forgings (4177) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Weber Metals, Inc. (4218) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Wyman-Gordon - MA (3454) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Wyman-Gordon-SC (12283) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 3P Processing, Inc. (3310) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 AAA Plating & Inspection, Inc. (4342) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Aaxon Labs, Inc. (4574) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Advanced Coating Technique (4813) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Aerospace Welding Inc. - Quebec (6347) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 All Metals Processing of Orange County, LLC (3320) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Alp Aviation (7440) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Anodizing & Paint TNM Inc. (4687) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Arconic Forgings and Extrusions (3316) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 ASCO Industries (5321) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Asko Processing, Inc. (3049) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 ATI Forged Products (3297) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Barry Avenue Plating (3067) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 B-G Detection Services (4490) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Blanchard Metals Processing Co. (4569) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Blue Streak Finishers (4405) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Bowman Plating, Inc (4199) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Brampton Processing (4648) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 California Metal Processing (4012) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Coast Plating Inc (4572) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Consolidated Precision Products CPP - Syracuse (3151) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Element Materials Technology Rancho Dominguez (3657) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Embee Processing, LLC. (3337) NDT - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Esterline Hytek Finishes (4508) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Fokker Landing Gear B.V. (7454) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Fucine Umbre (8092) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Golden State Magnetic & Penetrant Lab, Inc. (4729) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Hixson Metal Finishing (3174) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Imagineering Finishing Technologies (3203) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Incertec - Mexico (8902) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 K&L Anodizing (4908) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Kamatics Corp. (4548) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Magellan Aerospace Processing - New York (4250) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Magnetic and Penetrant Services Company (4200) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Metal Finishing Co. - Chihuahua (10847) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/2/2018 0:00 Metal Finishing Co. - McLean (3499) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

Page (49) of (128)


Printed: 12/14/2018

3/2/2018 0:00 Metal Finishing Co. - Murdock (8500) CP15 - PRE-PENETRANT ETCH AC7108/15 Approved Spec Added

3/1/2018 0:00 Impresa Aerospace, LLC (10372) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) SE - SHOT PEEN AMS-2430 Approved Spec Added

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) SE - SHOT PEEN BP-105 Not Approved Spec Added

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) SE - SHOT PEEN CP-0340 Not Approved Spec Added

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) SE - SHOT PEEN CPC-6400 Not Approved Spec Added

2/26/2018 0:00 Metal Improvement Co. - Windsor (4852) SE - SHOT PEEN PS-1201 Not Approved Spec Added

2/26/2018 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

2/26/2018 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP12 - PASSIVATION AMS-2700 Approved Spec Added

2/26/2018 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP01 - COATING, DRY FILM MIL-L-46010 Approved Spec Added

2/26/2018 0:00 Bowman Plating, Inc (4199) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

2/16/2018 0:00 CPP - PAC Foundries - Rancho (3569) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/16/2018 0:00 CPP - PAC Foundries - Rancho (3569) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/16/2018 0:00 CPP - PAC Foundries - Rancho (3569) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

2/7/2018 0:00 Kobe Steel Ltd. AQS - QUALITY SYSTEM JISQ9100 Inactive Spec Added

2/7/2018 0:00 Kobe Steel Ltd. HT - HEAT TREAT AMS-2770 Approved Spec Added

2/7/2018 0:00 Kobe Steel Ltd. HT - HEAT TREAT AMS-2772 Approved Spec Added

2/7/2018 0:00 Kobe Steel Ltd. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/6/2018 0:00 Heroux Devtek Laval (4589) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

2/6/2018 0:00 Heroux Devtek Laval (4589) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

2/2/2018 0:00 RUAG Australia Pty Ltd. (5422) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

2/1/2018 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) HT - HEAT TREAT AMS-2769 Approved Spec Added



2/1/2018 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) HT - STRESS RELIEF AMS-2759/11 Approved Spec Modification

2/1/2018 0:00 TTML Tensile Testing Metallurgical Laboratory NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

2/1/2018 0:00 Element Cleveland (4344) AQS - QUALITY SYSTEM ISO 17025 Approved Spec Added

1/30/2018 0:00 NSL Analytical Services (3236) AQS - QUALITY SYSTEM ISO 17025 Approved Spec Modification

1/29/2018 0:00 Hercules Heat Treating Corp (3166) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

1/29/2018 0:00 Dioxid Sp. Z o.o. (12271) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

1/29/2018 0:00 Phoenix Spring Company (3975) CP12 - PASSIVATION AMS-QQ-P-35 Approved Spec Added

1/29/2018 0:00 Phoenix Spring Company (3975) HT - HEAT TREAT AMS-2759/1 Approved Spec Added



1/18/2018 0:00 LHM Technologies Inc. AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

1/18/2018 0:00 Modern Industries (7006) AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

1/18/2018 0:00 Modern Industries, Inc. (3215) AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

1/17/2018 0:00 Newton Heat Treating Co. (4179) HT - HEAT TREAT AMS-H-6088 Approved Spec Added

1/17/2018 0:00 Quality Heat Treating (4407) HT - HEAT TREAT AMS-2759/4 Approved Spec Added

1/16/2018 0:00 Tekalia Aeronautik (2010) Inc (7875) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

1/11/2018 0:00 ST&I Inc. - Surface Treatment & Inspection (3800) CP05 - CHEMICAL MILLING MIL-C-81769 Approved Spec Added

Page (50) of (128)


Printed: 12/14/2018

1/11/2018 0:00 ST&I Inc. - Surface Treatment & Inspection (3800) CP05 - CHEMICAL MILLING AMS-C-81769 Approved Spec Added

1/11/2018 0:00 Electron Beam Welding - CA (3648) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/11/2018 0:00 Embee Processing, LLC. (3337) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232 Inactive Spec Removed

1/11/2018 0:00 Embee Processing, LLC. (3337) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Inactive Spec Removed

1/10/2018 0:00 Kryler Corp. (4377) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

1/10/2018 0:00 Kryler Corp. (4377) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

1/10/2018 0:00 Merrill Aviation Inc. (10259) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

1/9/2018 0:00 Dixon Hard Chrome, Inc (4214) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/9/2018 0:00 Barry Avenue Plating (3067) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232 Approved Spec Added

1/9/2018 0:00 Barry Avenue Plating (3067) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/9/2018 0:00 Dixon Hard Chrome, Inc (4214) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

1/9/2018 0:00 Dixon Hard Chrome, Inc (4214) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

1/6/2018 0:00 Esterline Hytek Finishes (4508) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2481 Inactive Spec Removed

1/4/2018 0:00 Manufacturing Technology, Inc. (5530) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/3/2018 0:00 Ducommun AeroStructures El Mirage (3110) CP05 - CHEMICAL MILLING AMS-C-81769 Approved Spec Added

1/3/2018 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-S-6090 Inactive Spec Removed

12/15/2017 0:00 Magellan Aerospace Processing - New York (4250) CP09 - PLATING, ZINC NICKEL LGPS-1106 Approved Spec Added

12/15/2017 0:00 Magellan Aerospace Processing - New York (4250) CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107 Approved Spec Added

12/4/2017 0:00 Brampton Processing (4648) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

12/1/2017 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

12/1/2017 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

12/1/2017 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

12/1/2017 0:00 White Engineering Surfaces Corp. (9444) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

11/28/2017 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

11/20/2017 0:00 Mecaer America Inc. (12134) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

11/20/2017 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Inactive Spec Removed

11/17/2017 0:00 National Peening - OH (11488) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

11/17/2017 0:00 National Peening - OH (11488) SE - SHOT PEEN AMS-2430 Approved Spec Added

11/1/2017 0:00 All Metals Processing of Orange County, LLC (3320) CP02 - TEMPER ETCH INSPECTION MM-5512 Approved Spec Added

11/1/2017 0:00 All Metals Processing of Orange County, LLC (3320) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

10/31/2017 0:00 CIRCOR Aerospace Inc. (4581) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

10/27/2017 0:00 Shimadzu Corp. AQS - QUALITY SYSTEM JISQ9100 Inactive Spec Removed

10/25/2017 0:00 American Testing Services LTD (4187) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Approved Spec Added

10/25/2017 0:00 American Testing Services LTD (4187) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

10/19/2017 0:00 TRI-PROCESS Company Inc (4428) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/17/2017 0:00 All Metals Processing of Orange County, LLC (3320) CP01 - COATING, DRY FILM AS-5272 Approved Spec Added

10/17/2017 0:00 All Metals Processing of Orange County, LLC (3320) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

10/17/2017 0:00 All Metals Processing of Orange County, LLC (3320) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Approved Spec Added

10/17/2017 0:00 All Metals Processing of Orange County, LLC (3320) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/17/2017 0:00 Universal Aerospace Company (10647) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/17/2017 0:00 Universal Aerospace Company (10647) WLD - WELDING AWS-D17.1 Approved Spec Added

10/16/2017 0:00 Electrolizing, Inc. (4228) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

10/16/2017 0:00 Electrolizing, Inc. (4228) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/16/2017 0:00 K&L Anodizing (4908) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

10/16/2017 0:00 E/M Coating Services (3640) CP01 - COATING, DRY FILM AS-5272 Approved Spec Added

10/16/2017 0:00 E/M Coating Services (3640) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/16/2017 0:00 Electrolizing, Inc. (4228) CP09 - PLATING, CHROME AMS-2460 Not Approved Spec Added

10/13/2017 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) CP01 - COATING, PAINT APPLICATION E.S. 6.202 Approved Spec Added

Page (51) of (128)


Printed: 12/14/2018

10/13/2017 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CMSP - GRINDING, HVOF AMS-2449 Approved Spec Added

10/13/2017 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CT - HVOF AMS-2448 Approved Spec Added




10/12/2017 0:00 Aluminum Precision Products - Oxnard (4780) HT - HEAT TREAT AMS-H-6088 Approved Spec Added

9/29/2017 0:00 Bodycote Thermal Processing - Elkhart (8654) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

9/29/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Inactive Spec Removed

9/29/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Inactive Spec Removed

9/27/2017 0:00 Weatherford Aerospace, LLC (4812) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/27/2017 0:00 Weatherford Aerospace, LLC (4812) CP05 - CHEMICAL MILLING LGPS-8003 Approved Spec Added

9/19/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2480 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2481 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP12 - PASSIVATION AMS-2700 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP12 - PASSIVATION ASTM-A-380 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added



9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) SE - SHOT PEEN AMS-2430 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

9/18/2017 0:00 DCI Aerotech Div. of Detroit Chrome Inc. (3616) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

8/29/2017 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - PASSIVATION CP-0520 Approved Spec Removed

8/29/2017 0:00 E/M Coating Services (3640) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Diamond Chrome Plating, Inc. (3618) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Embee Processing, LLC. (3337) CP12 - PASSIVATION ASTM-A-967 Approved Spec Removed

8/29/2017 0:00 E.M.E. Inc. (4111) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 California Metal Processing (4012) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 B-G Detection Services (4490) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Asko Processing, Inc. (3049) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Barry Avenue Plating (3067) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 AAA Plating & Inspection, Inc. (4342) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Allen Aircraft Products, Inc. (4339) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Mistras Services - Cudahy (3144) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Golden State Magnetic & Penetrant Lab, Inc. (4729) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

Page (52) of (128)


Printed: 12/14/2018

8/29/2017 0:00 Pacific Magnetic & Penetrant Co., Inc. (3251) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 K&L Anodizing (4908) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Southwest United Galnik SA de CV (10581) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 PAS Technologies - Phoenix (3378) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Protective Coatings, Inc. (4566) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Coast Plating Inc (4572) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Esterline Hytek Finishes (4508) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Southwest United Industries, Inc. (4185) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/29/2017 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Removed

8/28/2017 0:00 Bodycote Thermal Processing - Rancho Domi (3526) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/28/2017 0:00 Bodycote Thermal Processing - Rancho Domi (3526) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/23/2017 0:00 Westfield Electroplating (3443) CP12 - PASSIVATION MIL-S-5002 Inactive Spec Modification

8/23/2017 0:00 Magellan Aerospace Processing - New York (4250) CP12 - PASSIVATION MIL-S-5002 Inactive Spec Modification

8/12/2017 0:00 Industrial Metal Finishing (5712) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN AMS-2430 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN PS-1201 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN CPC-6400 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN BP-105 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN CP-0340 Approved Spec Added

8/12/2017 0:00 Industrial Metal Finishing (5712) SE - SHOT PEEN MMC-137 Approved Spec Added

8/11/2017 0:00 General Magnaplate Corp. (4571) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

8/11/2017 0:00 General Magnaplate Corp. (4571) CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Approved Spec Added

8/7/2017 0:00 Central Metal Finishing (3548) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

8/5/2017 0:00 B-G Detection Services (4490) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

8/4/2017 0:00 Thermi-Garonne (6765) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

8/4/2017 0:00 Thermi-Garonne (6765) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

8/4/2017 0:00 Thermi-Garonne (6765) HT - HEAT TREAT AMS-2770 Inactive Spec Removed

8/4/2017 0:00 Thermi-Garonne (6765) HT - HEAT TREAT AMS-2801 Inactive Spec Removed

7/31/2017 0:00 Doncasters Southern Tool (4425) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/27/2017 0:00 Harbor Castings, Inc. (16586) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/27/2017 0:00 Harbor Castings, Inc. (16586) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/27/2017 0:00 Wyman-Gordon-SC (12283) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/27/2017 0:00 Metal Surfaces Inc. (3501) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

7/25/2017 0:00 Plasma Technology (3703) CT - HVOF AMS-2447 Approved Spec Added

7/25/2017 0:00 Plasma Technology (3703) CT - GRINDING, HVOF LGPS-7010 Approved Spec Added

7/20/2017 0:00 American Testing Services LTD (4187) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/20/2017 0:00 American Testing Services LTD (4187) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/20/2017 0:00 American Testing Services LTD (4187) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/20/2017 0:00 H&S Inspection Service Inc. (3154) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/20/2017 0:00 H&S Inspection Service Inc. (3154) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

7/20/2017 0:00 H&S Inspection Service Inc. (3154) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

7/7/2017 0:00 Interface Welding (5594) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

7/6/2017 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CP09 - PLATING, NICKEL MIL-STD-868 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

Page (53) of (128)


Printed: 12/14/2018

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP12 - PASSIVATION AMS-2700 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) HT - HEAT TREAT AMS-H-6088 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) HT - HEAT TREAT AMS-2759/1 Approved Spec Added







7/5/2017 0:00 Blanchard Metals Processing Co. (4569) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

7/5/2017 0:00 Blanchard Metals Processing Co. (4569) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/5/2017 0:00 Ogden Air Logistics (Hill AFB) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

6/30/2017 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/28/2017 0:00 Interface Welding (5594) WLD - WELDING MIL-STD-1252 Approved Spec Added

6/27/2017 0:00 Imagineering Finishing Technologies (3203) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/27/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/26/2017 0:00 Manufacturing Technology, Inc. (5530) WLD - WELDING CPC-5306 Approved Spec Added

6/26/2017 0:00 Manufacturing Technology, Inc. (5530) WLD - WELDING LGPS-5002 Approved Spec Added

6/26/2017 0:00 Manufacturing Technology, Inc. (5530) WLD - WELDING MIL-STD-1252 Approved Spec Added

6/22/2017 0:00 GOODRICH AEROSPACE POLAND SP. Z O.O. RZESZOW (11317) SE - SHOT PEEN E.S. 5.30 Approved Spec Added

6/19/2017 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/15/2017 0:00 Techmetals, Inc (4210) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/13/2017 0:00 Quality Aluminum Forge (4427) HT - HEAT TREAT MIL-H-6088 Approved Spec Added

Page (54) of (128)


Printed: 12/14/2018

6/13/2017 0:00 Quality Aluminum Forge (4427) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/13/2017 0:00 Quality Aluminum Forge (4427) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/13/2017 0:00 Quality Aluminum Forge (4427) HT - HEAT TREAT AMS-2772 Approved Spec Added

5/31/2017 0:00 Precision Coil Spring (4041) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

5/31/2017 0:00 Precision Coil Spring (4041) HT - HEAT TREAT AMS-2801 Inactive Spec Removed

5/30/2017 0:00 Blue Streak Finishers (4405) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

5/30/2017 0:00 Blue Streak Finishers (4405) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/30/2017 0:00 Blue Streak Finishers (4405) SE - SHOT PEEN AMS-2430 Approved Spec Added

5/30/2017 0:00 J. D. Ott Company, Inc. (4334) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

5/30/2017 0:00 Techmetals, Inc (4210) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/30/2017 0:00 Southwest United Canada Inc. - CEEL Limited (5208) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/30/2017 0:00 Southwest United Canada Inc. - CEEL Limited (5208) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/30/2017 0:00 AIM Aerospace Sumner Inc. (6183) COMP - COMPOSITES N/A Approved Spec Added

5/30/2017 0:00 Blue Streak Finishers (4405) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

5/30/2017 0:00 Blue Streak Finishers (4405) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

5/30/2017 0:00 Blue Streak Finishers (4405) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

5/26/2017 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)HT - HEAT TREAT E.S. 13.3.79 Approved Spec Added

5/19/2017 0:00 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) HT - HEAT TREAT E.S. 5.14.26 Approved Spec Added

5/19/2017 0:00 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) NDT - INSPECTION, ULTRASONIC ASTM-B-594 Approved Spec Added

5/16/2017 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-2772 Inactive Spec Removed

5/16/2017 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-2770 Inactive Spec Removed

5/5/2017 0:00 Winston Heat Treating Inc. (3910) HT - HEAT TREAT AMS-2770 Inactive Spec Modification

5/5/2017 0:00 Winston Heat Treating Inc. (3910) HT - HEAT TREAT AMS-2772 Inactive Spec Modification

5/3/2017 0:00 Goodrich Landing Systems - Burlington (4420) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/3/2017 0:00 Goodrich Landing Systems - Burlington (4420) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/3/2017 0:00 Goodrich Landing Systems - Burlington (4420) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/3/2017 0:00 Goodrich Landing Systems - Burlington (4420) SE - SHOT PEEN AMS-2430 Approved Spec Added

5/1/2017 0:00 RBC Transport Dynamics (4312) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/1/2017 0:00 RBC Transport Dynamics (4312) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

4/24/2017 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT AMS-2759 Inactive Spec Removed

4/20/2017 0:00 Cotec Corp. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Added

4/20/2017 0:00 Cotec Corp. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Inactive Spec Added

4/20/2017 0:00 Cotec Corp. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Inactive Spec Added

4/20/2017 0:00 Cotec Corp. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Added

4/20/2017 0:00 Cotec Corp. CP12 - PASSIVATION AMS-2700 Inactive Spec Added

4/20/2017 0:00 Cotec Corp. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

4/20/2017 0:00 Korea Heat Treatment Co. (KHT) HT - HEAT TREAT AMS-2759/1 Inactive Spec Added

4/20/2017 0:00 Korea Heat Treatment Co. (KHT) HT - HEAT TREAT AMS-2759/3 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Added

4/20/2017 0:00 Samwoo Metal Industries Co. Ltd. CP12 - PASSIVATION AMS-2700 Inactive Spec Added

4/20/2017 0:00 Korea Heat Treatment Co. (KHT) AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

4/20/2017 0:00 Xi'an Aviation Brake Technology Co (8467) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/20/2017 0:00 Xi'an Aviation Brake Technology Co (8467) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

4/20/2017 0:00 Xi'an Aviation Brake Technology Co (8467) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

Page (55) of (128)


Printed: 12/14/2018

4/20/2017 0:00 Xi'an Aviation Brake Technology Co (8467) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

4/20/2017 0:00 Xi'an Aviation Brake Technology Co (8467) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118 Approved Spec Added

4/19/2017 0:00 Icore International, Inc. (5032) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/19/2017 0:00 Icore International, Inc. (5032) WLD - BRAZING AWS-C3.7 Approved Spec Added

4/19/2017 0:00 Icore International, Inc. (5032) WLD - WELDING AWS-D17.1 Approved Spec Added

4/19/2017 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)HT - HEAT TREAT AMS-2759/2 Approved Spec Modification

4/19/2017 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)HT - HEAT TREAT AMS-2772 Approved Spec Modification

4/18/2017 0:00 Bodycote IMT, Inc. (3079) HT - HEAT TREAT E.S. 13.101 Approved Spec Added




4/18/2017 0:00 Bodycote IMT, Inc. (3079) HT - HOT ISOSTATIC PRESSURE E.S. 13.101 Approved Spec Added




4/18/2017 0:00 Bodycote IMT, Inc. (3079) HT - HOT ISOSTATIC PRESSURE AMS-4991 Approved Spec Added

4/18/2017 0:00 Bodycote IMT, Inc. (3079) HT - HEAT TREAT AMS-4991 Approved Spec Added

4/18/2017 0:00 Bodycote IMT, Inc. (3079) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

4/18/2017 0:00 Kittyhawk Products (6224) HT - HOT ISOSTATIC PRESSURE AMS-4991 Approved Spec Added

4/18/2017 0:00 Kittyhawk Products (6224) HT - HOT ISOSTATIC PRESSURE E.S. 13.101 Approved Spec Added




4/17/2017 0:00 Selmet Inc (3763) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

4/17/2017 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING MMC-380 Approved Spec Added

4/17/2017 0:00 HTG Hi Tech Aero (3196) WLD - BRAZING AMS-2665 Approved Spec Added

4/17/2017 0:00 HTG Hi Tech Aero (3196) HT - HEAT TREAT AMS-2759 Inactive Spec Removed

4/13/2017 0:00 Cooperative Plating (4661) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

4/13/2017 0:00 Cooperative Plating (4661) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/13/2017 0:00 Cooperative Plating (4661) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

4/13/2017 0:00 Cooperative Plating (4661) CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

4/11/2017 0:00 Bodycote IMT, Inc. (3079) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/11/2017 0:00 DCG Precision Mfg. AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/11/2017 0:00 DCG Precision Mfg. CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

4/11/2017 0:00 Kittyhawk Products (6224) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/7/2017 0:00 VTN WITTEN (5170) HT - HEAT TREAT LGPS-2000 Approved Spec Added

4/6/2017 0:00 Goodrich Landing Systems Services - Miami (7842) CP01 - COATING, CERAMIC METALLIC (SERMETEL®) MMC-370 Approved Spec Added

4/6/2017 0:00 U.S. Chrome Corp. of Ohio (3405) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

4/6/2017 0:00 U.S. Chrome Corp. of Ohio (3405) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Approved Spec Added

4/6/2017 0:00 U.S. Chrome Corp. of Ohio (3405) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

4/6/2017 0:00 U.S. Chrome Corp. of Ohio (3405) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.90 Approved Spec Added

4/6/2017 0:00 U.S. Chrome Corp. of Ohio (3405) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/6/2017 0:00 Secondo Mona (7808) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

4/5/2017 0:00 Taylor Certified Processing, Inc. (5114) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/23/2017 0:00 Modern Industries, Inc. - Erie (4319) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/17/2017 0:00 Goodrich Landing Systems Services - Miami (7842) AQS - QUALITY SYSTEM AS 9110 Approved Spec Added

3/9/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP10 - ELECTROLESS PLATING, NICKEL E.S. 6.118 Approved Spec Added

3/9/2017 0:00 Carlisle Brake & Friction HT - SINTERING E.S. 16.1 Approved Spec Added

Page (56) of (128)


Printed: 12/14/2018








3/9/2017 0:00 Shultz Steel Co. (4392) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/9/2017 0:00 AAA Plating & Inspection, Inc. (4342) CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

3/9/2017 0:00 AAA Plating & Inspection, Inc. (4342) CP07 - IVD, ALUMINUM MIL-DTL-83488 Approved Spec Added

3/9/2017 0:00 AAA Plating & Inspection, Inc. (4342) CP07 - IVD, ALUMINUM AMS-2427 Approved Spec Added

3/9/2017 0:00 AAA Plating & Inspection, Inc. (4342) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/9/2017 0:00 Omni Metal Finishing Inc. (3241) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/9/2017 0:00 Hixson Metal Finishing (3174) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

3/9/2017 0:00 Hixson Metal Finishing (3174) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/7/2017 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT S.S. 30.13 Approved Spec Added

3/7/2017 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT AMS-2759/4 Inactive Spec Removed

3/7/2017 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT AMS-2759/2 Inactive Spec Removed

3/3/2017 0:00 Tiodize Co., Inc. AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2017 0:00 Exotic Tool Welding Company (5464) WLD - WELDING CPC-5204 Approved Spec Added

3/3/2017 0:00 Metallics, Inc. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Pulled Spec Removed

3/1/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2 Approved Spec Added

3/1/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4 Approved Spec Added

2/28/2017 0:00 Parker Trutec Inc. HT - HEAT TREAT E.S. 6.183 Approved Spec Added

2/28/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Approved Spec Added

2/28/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2 Approved Spec Added

2/28/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4 Approved Spec Added

2/28/2017 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

2/28/2017 0:00 B-D Industries, Inc. (3847) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

2/22/2017 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT BP-106 Approved Spec Added

2/21/2017 0:00 B-D Industries, Inc. (3847) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

2/21/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

2/21/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416 Approved Spec Added

2/21/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, NICKEL - Cadmium Diffused E.S. 5.18 Approved Spec Added

2/21/2017 0:00 Hohman Plating & Mfg., Inc. (3175) CP01 - COATING, PAINT APPLICATION E.S. 6.6 Approved Spec Added

2/21/2017 0:00 Praxair Surface Tech. - Indianapolis (3707) CT - PLASMA ARC SPRAY E.S. 6.211 Approved Spec Added

2/21/2017 0:00 Praxair Surface Tech. - Indianapolis (3707) CT - HVOF E.S. 6.212 Approved Spec Added

2/10/2017 0:00 Acuren Inspection, Inc. (3417) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/10/2017 0:00 Acuren Inspection, Inc. (3417) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/10/2017 0:00 Acuren Inspection, Inc. (3417) AQS - QUALITY SYSTEM ISO 17025 Approved Spec Added

2/9/2017 0:00 Manufacturing Technology, Inc. (5530) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/1/2017 0:00 CANTON DROP FORGE (4423) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 Sifco Forge Group (3777) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 Kropp Forge (4373) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 Modern Forge Indiana, LLC (8587) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 Bodycote Thermal Processing - Cincy (3518) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

2/1/2017 0:00 Bodycote Thermal Processing - Worchester (6018) HT - HEAT TREAT E.S. 5.14.31 Approved Spec Added

Page (57) of (128)


Printed: 12/14/2018

2/1/2017 0:00 Applus RTD Canada- at 2Source NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/1/2017 0:00 Applus RTD Canada- at 2Source AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

2/1/2017 0:00 All Metals Processing of Orange County, LLC (3320) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/31/2017 0:00 PAS Technologies - Kansas City (5202) CT - GRINDING, HVOF LGPS-7010 Approved Spec Modification

1/31/2017 0:00 P M Testing Laboratory Inc (4535) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

1/31/2017 0:00 PAS Technologies - Kansas City (5202) CT - STRIPPING, HVOF LGPS-1300 Approved Spec Modification

1/31/2017 0:00 Plasma Coating Corp (4754) CT - GRINDING, HVOF LGPS-7010 Approved Spec Modification

1/31/2017 0:00 Plasma Coating Corp (4754) CT - STRIPPING, HVOF LGPS-1300 Approved Spec Modification

1/31/2017 0:00 Quality Steel Treating LLC (4005) HT - STRESS RELIEF AMS-H-6875 Approved Spec Added

1/31/2017 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT AMS-2759/5 Approved Spec Added



1/30/2017 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT ASTM-B-194/196 Inactive Spec Removed

1/30/2017 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT AMS-H-7199 Inactive Spec Removed

1/24/2017 0:00 O&W Heat Treat Inc. (3238) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

1/17/2017 0:00 Bodycote Thermal Processing - Huntington Park (3307) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

1/3/2017 0:00 Magellan Aerospace Processing - New York (4250) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/23/2016 0:00 Kryler Corp. (4377) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

12/12/2016 0:00 Aaxon Labs, Inc. (4574) CP12 - PASSIVATION AMS-2700 Approved Spec Added

12/12/2016 0:00 Aaxon Labs, Inc. (4574) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/12/2016 0:00 Aaxon Labs, Inc. (4574) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

12/7/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

12/7/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

12/5/2016 0:00 Plating Perceptions, Inc. (4563) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP01 - COATING, PAINT APPLICATION MIL-DTL-18264 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Removed

12/2/2016 0:00 Coast Plating Inc (4572) CP12 - PASSIVATION AMS-2700 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

12/2/2016 0:00 Coast Plating Inc (4572) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

11/30/2016 0:00 Strite Precision Machining Ltd. (12234) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

11/30/2016 0:00 Temrick, Inc. CMSP - GRINDING, CHROME LGPS-7000 Not Approved Spec Removed

11/30/2016 0:00 Temrick, Inc. CMSP - GRINDING, CHROME MIL-STD-866 Not Approved Spec Removed

11/30/2016 0:00 Temrick, Inc. AQS - QUALITY SYSTEM AS 9003 Not Approved Spec Removed

11/30/2016 0:00 Temrick, Inc. CMSP - GRINDING, CHROME MM-4990-5 Not Approved Spec Removed

11/29/2016 0:00 Applied Process, Inc. (8078) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

11/29/2016 0:00 Applied Process, Inc. (8078) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

11/17/2016 0:00 PPI Aerospace LLC (Paint) (8786) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

Page (58) of (128)


Printed: 12/14/2018

11/17/2016 0:00 PPI Aerospace LLC (Paint) (8786) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

11/17/2016 0:00 PPI Aerospace LLC (Main) (3840) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

11/14/2016 0:00 Plasma Technology (3703) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

11/8/2016 0:00 Lego Finishing Center Inc. CP02 - TEMPER ETCH INSPECTION AMS-2649 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) MMC-199 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CHROME MIL-STD-1501 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, CHROME MMC-273 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, COPPER AMS-2418 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, NICKEL AMS-2403 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, SILVER ASTM-B-700 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP09 - PLATING, THIN DENSE CHROME AMS-2438 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

11/8/2016 0:00 Lego Finishing Center Inc. CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

11/8/2016 0:00 Noranco – Woodbridge Division CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

11/8/2016 0:00 Noranco – Woodbridge Division CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

11/1/2016 0:00 Brampton Processing (4648) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

10/17/2016 0:00 CIRCOR Aerospace Inc. (4581) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

9/30/2016 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 type 1b Approved Spec Added

9/30/2016 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 type 2b Approved Spec Added

9/30/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Approved Spec Added

9/30/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

9/28/2016 0:00 Metcor Inc. (4781) HT - HEAT TREAT AMS-2759/1 Approved Spec Added






9/26/2016 0:00 Asko Industrial Repair (9435) CT - HVOF AMS-2447 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CT - HVOF AMS-2448 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CT - HVOF LGPS-1301 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) CMSP - GRINDING, HVOF AMS-2449 Approved Spec Added

9/26/2016 0:00 Asko Industrial Repair (9435) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

Page (59) of (128)


Printed: 12/14/2018

9/23/2016 0:00 Akron Steel Treating (5068) HT - HEAT TREAT AMS-5659 Approved Spec Added

9/22/2016 0:00 UMBRAGROUP S.P.A. (5269) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

9/22/2016 0:00 UMBRAGROUP S.P.A. (5269) HT - HEAT TREAT AMS-2759/1 Approved Spec Added


9/22/2016 0:00 UMBRAGROUP S.P.A. (5269) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

9/16/2016 0:00 Hi-Tech Metal Finishing, Inc. (11426) SE - FLAPPER / ROTO PEENING MIL-R-81841 Superceded Spec Removed

9/13/2016 0:00 Secondo Mona (7808) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/13/2016 0:00 National Rivet & Mfg Co HT - HEAT TREAT AMS-2759/4 Approved Spec Added

9/13/2016 0:00 National Rivet & Mfg Co CP12 - PASSIVATION AMS-2700 Approved Spec Added

9/13/2016 0:00 National Rivet & Mfg Co HT - HEAT TREAT AMS-H-6875 Approved Spec Added

9/12/2016 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

8/22/2016 0:00 Protective Coatings, Inc. (4566) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/22/2016 0:00 Protective Coatings, Inc. (4566) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

8/22/2016 0:00 Renton Coil Spring Co. (4559) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/22/2016 0:00 Magnetic and Penetrant Services Company (4200) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

8/12/2016 0:00 Metcor Inc. (4781) HT - HEAT TREAT ASTM-B-194/196 Inactive Spec Removed

8/12/2016 0:00 Southwest United Canada Inc.(4197) CP02 - TEMPER ETCH INSPECTION AMS-2649 Inactive Spec Removed

8/12/2016 0:00 Southwest United Canada Inc.(4197) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

8/12/2016 0:00 Southwest United Canada Inc.(4197) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Inactive Spec Removed

8/12/2016 0:00 Southwest United Canada Inc.(4197) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Removed

8/12/2016 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CHROME MM-4953 Inactive Spec Removed

8/12/2016 0:00 Tekalia Aeronautik (2010) Inc (7875) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Inactive Spec Removed

8/12/2016 0:00 Globe Grinding Corp (5871) CMSP - GRINDING, CHROME MM-4990-5 Approved Spec Added

8/10/2016 0:00 Modern Forge Indiana, LLC (8587) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/9/2016 0:00 PAS Technologies - Phoenix (3378) SE - SHOT PEEN AMS-2430 Approved Spec Added

8/9/2016 0:00 PAS Technologies - Phoenix (3378) SE - SHOT PEEN AMS-2432 Approved Spec Added

8/4/2016 0:00 PAS Technologies - Kansas City (5202) CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Removed

8/3/2016 0:00 Praxair Surface Technologies-Montreal AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

8/3/2016 0:00 Praxair Surface Technologies-Montreal CP01 - COATING, CERAMIC METALLIC (SERMETEL®) E.S. 6.185 Inactive Spec Added

8/3/2016 0:00 Globe Grinding Corp (5871) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

7/29/2016 0:00 GSC Foundries, Inc. (3833) AQS - QUALITY SYSTEM AS 9100 Inactive Spec Modification

7/28/2016 0:00 VERDUN ANODIZING INC. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

7/28/2016 0:00 VERDUN ANODIZING INC. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

7/28/2016 0:00 VERDUN ANODIZING INC. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Inactive Spec Removed

7/28/2016 0:00 VERDUN ANODIZING INC. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MMC-152 Inactive Spec Removed

7/28/2016 0:00 VERDUN ANODIZING INC. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

7/28/2016 0:00 VERDUN ANODIZING INC. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

7/19/2016 0:00 Asko Processing - Color Tech Div. (4626) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

7/18/2016 0:00 VTN WITTEN (5170) HT - HEAT TREAT AMS-2772 Approved Spec Modification

7/18/2016 0:00 VTN WITTEN (5170) HT - HEAT TREAT MM-5744 Inactive Spec Removed

7/13/2016 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

7/12/2016 0:00 Acutec Precision Machining AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

7/12/2016 0:00 Acutec Precision Machining NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

7/12/2016 0:00 Acutec Precision Machining NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

7/12/2016 0:00 Acutec Precision Machining CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

7/12/2016 0:00 Acutec Precision Machining CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

7/8/2016 0:00 Valley Steel Stamp, Inc. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

7/8/2016 0:00 Valley Steel Stamp, Inc. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

Page (60) of (128)


Printed: 12/14/2018

7/7/2016 0:00 Modern Forge Indiana, LLC (8587) HT - HEAT TREAT AMS-H-6875 Approved Spec Modification

7/6/2016 0:00 Secondo Mona (7808) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

7/6/2016 0:00 Secondo Mona (7808) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

6/29/2016 0:00 Voss Industries (3430) WLD - WELDING AWS-D17.2 Approved Spec Modification

6/28/2016 0:00 Central Metal Finishing (3548) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/28/2016 0:00 Central Metal Finishing (3548) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

6/28/2016 0:00 Bodycote Thermal Processing - Berlin CT (3081) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

6/28/2016 0:00 Bodycote Thermal Processing - Berlin CT (3081) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/27/2016 0:00 Metallurgical AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/27/2016 0:00 Metallurgical HT - HEAT TREAT AMS-2759/3 Approved Spec Added

6/27/2016 0:00 Metallurgical HT - HEAT TREAT AMS-2759/4 Approved Spec Added

6/27/2016 0:00 O&W Heat Treat Inc. (3238) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

6/27/2016 0:00 O&W Heat Treat Inc. (3238) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

6/27/2016 0:00 Specialty Steel Treating (3794) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/27/2016 0:00 Specialty Steel Treating (3794) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

6/8/2016 0:00 Circor Aerospace Inc. (ref. only, do not use) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/8/2016 0:00 Circor Aerospace Inc. (ref. only, do not use) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/8/2016 0:00 Circor Aerospace Inc. (ref. only, do not use) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/8/2016 0:00 Aluminum Finishing Co. (5672) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/8/2016 0:00 E/M Coating Services (3640) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

6/7/2016 0:00 3P Processing, Inc. (3310) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/7/2016 0:00 3P Processing, Inc. (3310) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

6/7/2016 0:00 3P Processing, Inc. (3310) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/7/2016 0:00 AH Plating (4930) CP09 - PLATING, CHROME E.S. 6.194 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) NM - EDM (Electro Discharge Machining) N/A Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) HT - HEAT TREAT AMS-2759/1 Approved Spec Added



6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) NM - EDM (Electro Discharge Machining) N/A Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Approved Spec Added

6/2/2016 0:00 QingAn Group Co.Ltd.(10938) NDT - INSPECTION, TEMPER ETCH MIL-STD-867 Approved Spec Added

6/2/2016 0:00 Xi'an Aviation Brake Technology Co (8467) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/2/2016 0:00 Xi'an Aviation Brake Technology Co (8467) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

6/2/2016 0:00 Xi'an Aviation Brake Technology Co (8467) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

6/2/2016 0:00 Xi'an Aviation Brake Technology Co (8467) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/2/2016 0:00 Xi'an Aviation Brake Technology Co (8467) CP09 - PLATING, ZINC ASTM-B-633 Approved Spec Added

6/2/2016 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

6/2/2016 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

6/2/2016 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

6/2/2016 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2472 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

Page (61) of (128)


Printed: 12/14/2018


6/2/2016 0:00 QingAn Group Co. Ltd.(8347) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

6/2/2016 0:00 QingAn Group Co. Ltd.(8347) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

6/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) E.S. 6.16.1 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, DRY FILM E.S. 6.64 Approved Spec Added

6/1/2016 0:00 Vijaya Metal Finishers (8870) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

6/1/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP01 - COATING, DRY FILM E.S. 6.64 Approved Spec Added

6/1/2016 0:00 Praxair Surface Technologies - CT (3770) CP01 - COATING, CERAMIC METALLIC (SERMETEL®) E.S. 6.185 Approved Spec Added

6/1/2016 0:00 White Engineering Surfaces Corp. (9444) CT - HVOF E.S. 6.164 Approved Spec Added

6/1/2016 0:00 Electrolizing, Inc. (4228) CP09 - PLATING, CHROME E.S. 6.146 Approved Spec Added

5/24/2016 0:00 Techmetals, Inc (4210) CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Added

5/24/2016 0:00 The Sousa Corp. (3787) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/24/2016 0:00 The Sousa Corp. (3787) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





5/24/2016 0:00 The Sousa Corp. (3787) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/24/2016 0:00 U.S. Chrome Corp. of Connecticut (7178) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/24/2016 0:00 U.S. Chrome Corp. of Connecticut (7178) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

5/24/2016 0:00 U.S. Chrome Corp. of Connecticut (7178) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

5/24/2016 0:00 Valley Plating Inc. (3425) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/24/2016 0:00 Valley Plating Inc. (3425) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

5/24/2016 0:00 Westfield Electroplating (3443) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

5/24/2016 0:00 Westfield Electroplating (3443) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

5/24/2016 0:00 Westfield Electroplating (3443) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

5/24/2016 0:00 Westfield Electroplating (3443) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

5/24/2016 0:00 White Engineering Surfaces Corp. (9444) CT - HVOF AMS-2447 Approved Spec Added

5/24/2016 0:00 White Engineering Surfaces Corp. (9444) CT - PLASMA ARC SPRAY AMS-7875 Approved Spec Added

5/24/2016 0:00 XRI Testing - Troy (3464) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/24/2016 0:00 Selmet Inc (3763) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/24/2016 0:00 Selmet Inc (3763) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

5/24/2016 0:00 Selmet Inc (3763) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/24/2016 0:00 Selmet Inc (3763) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

5/24/2016 0:00 Selmet Inc (3763) WLD - WELDING AWS-D17.1 Approved Spec Added

5/24/2016 0:00 Aerospace Welding Inc. - Quebec (6347) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/24/2016 0:00 Aerospace Welding Inc. - Quebec (6347) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

5/24/2016 0:00 Aerospace Welding Inc. - Quebec (6347) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Approved Spec Added

5/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, ZINC AMS-2402 Approved Spec Added

5/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

5/24/2016 0:00 XRI Testing - Troy (3464) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

Page (62) of (128)


Printed: 12/14/2018

5/24/2016 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, TIN AMS-2408 Inactive Spec Removed

5/24/2016 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, TIN ASTM-B-545 Inactive Spec Removed

5/20/2016 0:00 Ducommun LaBarge Technologies (8744) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/19/2016 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP01 - COATING, DRY FILM AS-5272 Approved Spec Added

5/19/2016 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482 Approved Spec Added

5/17/2016 0:00 Alfe Heat Treating (4594) HT - HEAT TREAT E.S. 5.14.29 Approved Spec Added

5/17/2016 0:00 Alfe Heat Treating (4594) HT - HEAT TREAT E.S. 13.3.64 Approved Spec Added

5/17/2016 0:00 Consolidated Precision Products Corporation (CPP) - Syracuse (do not use)NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Spec Added

5/17/2016 0:00 Consolidated Precision Products Corporation (CPP) - Syracuse (do not use)NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Spec Added

5/17/2016 0:00 Consolidated Precision Products Corporation (CPP) - Syracuse (do not use)AQS - QUALITY SYSTEM AS 9100 Spec Added

5/9/2016 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT E.S. 5.14.26 Approved Spec Added

5/6/2016 0:00 Aerospace Welding Inc. - California (4473) WLD - WELDING MIL-W-6873 Approved Spec Added

5/6/2016 0:00 Spectrum Thermal Processing (3162) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/6/2016 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, SILVER AMS-2410 Approved Spec Added

5/6/2016 0:00 Embee Processing, LLC. (3337) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

5/6/2016 0:00 Embee Processing, LLC. (3337) CP14 - STRIPPING, HVOF AMS-2448 Approved Spec Added

5/6/2016 0:00 U.S. Chrome Corp. of Ohio (3405) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/6/2016 0:00 U.S. Chrome Corp. of Ohio (3405) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

5/6/2016 0:00 U.S. Chrome Corp. of Ohio (3405) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/6/2016 0:00 U.S. Chrome Corp. of Ohio (3405) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

5/5/2016 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/5/2016 0:00 Saporito Finishing Co. (4274) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

5/5/2016 0:00 Saporito Finishing Co. (4274) CP12 - PASSIVATION ASTM-A-380 Approved Spec Added

5/5/2016 0:00 Saporito Finishing Co. (4274) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/4/2016 0:00 B-G Detection Services (4490) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/4/2016 0:00 B-G Detection Services (4490) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/4/2016 0:00 B-G Detection Services (4490) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/4/2016 0:00 B-G Detection Services (4490) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/4/2016 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

5/4/2016 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

5/4/2016 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.88 Approved Spec Added

5/4/2016 0:00 Allen Aircraft Products, Inc. (4339) CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

5/4/2016 0:00 Allen Aircraft Products, Inc. (4339) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

5/4/2016 0:00 Black Oxide Industries Inc (4326) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485 Approved Spec Added

5/4/2016 0:00 Black Oxide Industries Inc (4326) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-F-495 Approved Spec Added

5/4/2016 0:00 Black Oxide Industries Inc (4326) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/4/2016 0:00 Black Oxide Industries Inc (4326) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

5/4/2016 0:00 Black Oxide Industries Inc (4326) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

5/4/2016 0:00 CPP - Steel Treaters Inc. (3804) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/4/2016 0:00 Electron Beam Welding - CA (3648) WLD - WELDING AWS-D17.1 Approved Spec Added

5/4/2016 0:00 Hoosier Spring Co., Inc (3181) HT - HEAT TREAT AMS-2774 Approved Spec Added

5/4/2016 0:00 Hoosier Spring Co., Inc (3181) HT - HEAT TREAT AMS-2801 Approved Spec Added

5/4/2016 0:00 Industrial Tectonics Bearings Inc. (4100) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

5/4/2016 0:00 Industrial Tectonics Bearings Inc. (4100) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/3/2016 0:00 Akron Steel Treating (5068) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

5/3/2016 0:00 Accurate Brazing (3093) WLD - BRAZING AMS-2675 Approved Spec Added

5/2/2016 0:00 Somerville Plating (3785) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added


Page (63) of (128)


Printed: 12/14/2018

5/2/2016 0:00 Somerville Plating (3785) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

5/2/2016 0:00 Somerville Plating (3785) HT - STRESS RELIEF AMS-2759/9 Approved Spec Added

5/2/2016 0:00 Weber Metals, Inc. (4218) HT - HEAT TREAT E.S. 5.14.26 Approved Spec Added

5/2/2016 0:00 Weber Metals, Inc. (4218) NDT - INSPECTION, ULTRASONIC ASTM-B-594 Approved Spec Added

5/2/2016 0:00 Progress Services Inc. (4671) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Approved Spec Added

5/2/2016 0:00 Winston Heat Treating Inc. (3910) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/2/2016 0:00 Winston Heat Treating Inc. (3910) HT - HEAT TREAT AMS-2759/1 Approved Spec Added








5/2/2016 0:00 Winston Heat Treating Inc. (3910) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/2/2016 0:00 Winston Heat Treating Inc. (3910) HT - HEAT TREAT E.S. 5.14.2 Approved Spec Added

5/2/2016 0:00 Incertec - Mexico (8902) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/2/2016 0:00 Incertec - Mexico (8902) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/2/2016 0:00 Saporito Finishing Co. (4274) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

5/2/2016 0:00 Saporito Finishing Co. (4274) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

5/2/2016 0:00 Saporito Finishing Co. (4274) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

5/2/2016 0:00 Saporito Finishing Co. (4274) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

5/1/2016 0:00 Praxair Surface Tech. - Compton (3768) AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

4/29/2016 0:00 Accurate Brazing (3093) HT - HEAT TREAT AMS-5663 Approved Spec Added

4/29/2016 0:00 American Tinning & Galvanizing Co. (5255) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

4/29/2016 0:00 American Tinning & Galvanizing Co. (5255) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

4/29/2016 0:00 American Tinning & Galvanizing Co. (5255) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

4/29/2016 0:00 American Tinning & Galvanizing Co. (5255) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

4/29/2016 0:00 American Tinning & Galvanizing Co. (5255) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

4/28/2016 0:00 METAL IMPROVEMENT CO. - Blue Ash (4724) SE - SHOT PEEN E.S. 5.30 Approved Spec Added

4/28/2016 0:00 Vandergriff Technologies NDT Services (4524) NDT - INSPECTION, ULTRASONIC AMS-2631 Approved Spec Added

4/26/2016 0:00 Bodycote Thermal Processing - Westminster (3516) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

4/26/2016 0:00 Magellan Aerospace-Kitchener CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

4/26/2016 0:00 Magellan Aerospace-Kitchener CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

4/26/2016 0:00 Magellan Aerospace-Kitchener CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Removed

4/26/2016 0:00 Magellan Aerospace-Kitchener CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Removed

4/25/2016 0:00 UTAS Power, Controls & Sensing Systems AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/21/2016 0:00 Javin Machine NA - ROLLER BURNISHING BR-163 Inactive Spec Removed

4/21/2016 0:00 Javin Machine AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

4/19/2016 0:00 A.T.L.A.S. Aeronautik Inc. CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

4/19/2016 0:00 A.T.L.A.S. Aeronautik Inc. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

4/19/2016 0:00 A.T.L.A.S. Aeronautik Inc. CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

4/19/2016 0:00 A.T.L.A.S. Aeronautik Inc. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

4/13/2016 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT AMS-5355 Approved Spec Added

4/12/2016 0:00 Lake City Heat Treating (3298) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

4/12/2016 0:00 Lake City Heat Treating (3298) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

Page (64) of (128)


Printed: 12/14/2018

4/12/2016 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

4/12/2016 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

4/12/2016 0:00 Pelcoat LLC dba Nation Coating Systems (10545) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/12/2016 0:00 Pelcoat LLC dba Nation Coating Systems (10545) CT - HVOF AMS-2447 Approved Spec Added

4/12/2016 0:00 Progress Services Inc. (4671) AQS - QUALITY SYSTEM ISO 17025 Approved Spec Added

4/12/2016 0:00 Progress Services Inc. (4671) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

4/12/2016 0:00 Progress Services Inc. (4671) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

4/12/2016 0:00 Progress Services Inc. (4671) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

4/12/2016 0:00 Quality Steel Treating LLC (4005) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

4/12/2016 0:00 Quality Steel Treating LLC (4005) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/12/2016 0:00 Spec Plating Inc. (4293) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/12/2016 0:00 Spec Plating Inc. (4293) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

4/12/2016 0:00 Spectrum Thermal Processing (3162) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/12/2016 0:00 Spectrum Thermal Processing (3162) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





4/12/2016 0:00 Saporito Finishing Co. (4274) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

4/12/2016 0:00 Saporito Finishing Co. (4274) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) CP01 - COATING, DRY FILM MIL-L-46010 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

4/12/2016 0:00 Imagineering Finishing Technologies (3203) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) CP09 - PLATING, CHROME AMS-2460 Approved Spec Modification

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

4/1/2016 0:00 QingAn Group Co. Ltd.(8347) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP12 - PASSIVATION E.S. 6.19 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, CHROME E.S. 6.131 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Approved Spec Modification

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29 Approved Spec Added

4/1/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)HT - HEAT TREAT AMS-H-6875 Approved Spec Added

4/1/2016 0:00 Aerospace Metal Finishing (4994) CP09 - PLATING, ZINC NICKEL LGPS-1106 Approved Spec Added

3/30/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

3/29/2016 0:00 Sumitomo Precision Products Co. Ltd. (5058) HT - HEAT TREAT AMS-2759/1 Approved Spec Added


3/24/2016 0:00 Evans Heat Treating (4418) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2016 0:00 Evans Heat Treating (4418) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

3/24/2016 0:00 Evans Heat Treating (4418) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/24/2016 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

Page (65) of (128)


Printed: 12/14/2018

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP07 - IVD, CADMIUM AMS-C-8837 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2480 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Added

3/24/2016 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, SILVER AMS-2410 Approved Spec Added

3/24/2016 0:00 Bodycote Hot Isostatic Pressing (10589) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2016 0:00 Bodycote Hot Isostatic Pressing (10589) HT - HOT ISOSTATIC PRESSURE ASTM-A-1080 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) HT - HEAT TREAT AMS-2759/4 Approved Spec Added



3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Laconia (3521) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Laconia (3521) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/24/2016 0:00 Bodycote Thermal Processing - Elkhart (8654) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Elkhart (8654) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/24/2016 0:00 Bodycote Thermal Processing - Ipswich (3520) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Ipswich (3520) HT - HEAT TREAT AMS-2759/3 Approved Spec Added



3/24/2016 0:00 Bodycote Thermal Processing - Ipswich (3520) HT - HEAT TREAT AMS-2774 Approved Spec Added

3/24/2016 0:00 Certified Heat Treating AQS - QUALITY SYSTEM ISO9000 Approved Spec Added

3/24/2016 0:00 Certified Heat Treating HT - HEAT TREAT AMS-2770 Approved Spec Added

3/24/2016 0:00 Chemtron Anodize Co. (5657) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2016 0:00 Chemtron Anodize Co. (5657) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/24/2016 0:00 Classic Metal Finishing Inc (8903) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2016 0:00 Classic Metal Finishing Inc (8903) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/24/2016 0:00 Classic Metal Finishing Inc (8903) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/24/2016 0:00 Somerville Plating (3785) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/24/2016 0:00 Somerville Plating (3785) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added


3/24/2016 0:00 Somerville Plating (3785) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2016 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/24/2016 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

3/24/2016 0:00 Har-Conn Chrome Co (3159) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) HT - HEAT TREAT AMS-2759/3 Not Approved Spec Added


3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/24/2016 0:00 Bodycote Thermal Processing - Cincy (3518) HT - HEAT TREAT AMS-2759/2 Not Approved Spec Added

Page (66) of (128)


Printed: 12/14/2018

3/23/2016 0:00 Alfe Heat Treating (4594) HT - HEAT TREAT MIL-H-6088 Approved Spec Added

3/23/2016 0:00 Alfe Heat Treating (4594) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/23/2016 0:00 Alfe Heat Treating (4594) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/23/2016 0:00 Akron Steel Treating (5068) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/23/2016 0:00 Akron Steel Treating (5068) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/23/2016 0:00 A-Lab Corporation (3083) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/23/2016 0:00 A-Lab Corporation (3083) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/23/2016 0:00 A-Lab Corporation (3083) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/23/2016 0:00 A-Lab Corporation (3083) AQS - QUALITY SYSTEM ISO 17025 Approved Spec Added



3/23/2016 0:00 Aluminum Finishing Co. (5672) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 Aluminum Finishing Co. (5672) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/23/2016 0:00 American Tinning & Galvanizing Co. (5255) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 American Tinning & Galvanizing Co. (5255) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/23/2016 0:00 American Tinning & Galvanizing Co. (5255) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/23/2016 0:00 AMZ Manufacturing (8745) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 AMZ Manufacturing (8745) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/23/2016 0:00 Anoplate Corp. (4719) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/23/2016 0:00 Astro Manufacturing & Design (10406) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 Astro Manufacturing & Design (10406) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/23/2016 0:00 B-D Industries, Inc. (3847) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/23/2016 0:00 Akron Steel Treating (5068) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/23/2016 0:00 Akron Steel Treating (5068) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/22/2016 0:00 O'Fallon Casting LLC (3172) WLD - WELDING AWS-D17.1 Approved Spec Added

3/22/2016 0:00 O'Fallon Casting LLC (3172) WLD - WELDING AMS-2694 Approved Spec Added

3/21/2016 0:00 Vac-Aero International Inc.-Montreal (3421) NA - LABORATORY / TESTING A2LA Approved

3/18/2016 0:00 South West Metal Finishing (3856) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/18/2016 0:00 South West Metal Finishing (3856) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/18/2016 0:00 South West Metal Finishing (3856) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

3/18/2016 0:00 South West Metal Finishing (3856) CP12 - PASSIVATION AMS-2700 Approved Spec Added

Page (67) of (128)


Printed: 12/14/2018

3/18/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CT - HVOF AMS-2447 Approved Spec Added

3/18/2016 0:00 BODYCOTE Western Europe (5241) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/18/2016 0:00 BODYCOTE Western Europe (5241) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/18/2016 0:00 BODYCOTE Western Europe (5241) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/18/2016 0:00 BODYCOTE Western Europe (5241) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/18/2016 0:00 Thermi-Garonne (6765) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/18/2016 0:00 Thermi-Garonne (6765) HT - HEAT TREAT AMS-2759 Approved Spec Added

3/18/2016 0:00 Embee Processing, LLC. (3337) CT - HVOF AMS-2447 Approved Spec Added

3/18/2016 0:00 Embee Processing, LLC. (3337) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

3/18/2016 0:00 Embee Processing, LLC. (3337) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/18/2016 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

3/17/2016 0:00 Electron Beam Welding - CA (3648) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/17/2016 0:00 Electron Beam Welding - CA (3648) WLD - WELDING AMS-2680 Approved Spec Added

3/17/2016 0:00 Electron Beam Welding - CA (3648) WLD - WELDING AMS-2681 Approved Spec Added

3/17/2016 0:00 Element Materials Technology Rancho Dominguez (3657) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/17/2016 0:00 Galaxy Brazing Inc. (4872) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/17/2016 0:00 Galaxy Brazing Inc. (4872) WLD - BRAZING AMS-2675 Approved Spec Added

3/17/2016 0:00 Galaxy Brazing Inc. (4872) WLD - WELDING AWS-D17.1 Approved Spec Added

3/17/2016 0:00 Globe Engineering Co. (4156) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/17/2016 0:00 Globe Engineering Co. (4156) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/17/2016 0:00 Globe Engineering Co. (4156) HT - HEAT TREAT AMS-2759/4 Approved Spec Added



3/17/2016 0:00 Hixson Metal Finishing (3174) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/17/2016 0:00 Hixson Metal Finishing (3174) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

3/17/2016 0:00 Hixson Metal Finishing (3174) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/17/2016 0:00 Hixson Metal Finishing (3174) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

3/17/2016 0:00 Hixson Metal Finishing (3174) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

3/17/2016 0:00 Hixson Metal Finishing (3174) CP10 - ELECTROLESS PLATING, NICKEL AMS-2405 Approved Spec Added

3/17/2016 0:00 Incotec Corp (5128) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/17/2016 0:00 Incotec Corp (5128) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/17/2016 0:00 Nasmyth TMF, Inc (4483) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/17/2016 0:00 Nasmyth TMF, Inc (4483) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/17/2016 0:00 Nevada Heat Treating (6373) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/17/2016 0:00 Nevada Heat Treating (6373) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/17/2016 0:00 Nevada Heat Treating (6373) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/17/2016 0:00 Orange Coast Testing Inc (5518) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/17/2016 0:00 Orange Coast Testing Inc (5518) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/17/2016 0:00 Orange Coast Testing Inc (5518) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/17/2016 0:00 Orange Coast Testing Inc (5518) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

Page (68) of (128)


Printed: 12/14/2018

3/17/2016 0:00 Plasma Coating Corp (4754) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/17/2016 0:00 Quality Heat Treating (4407) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/17/2016 0:00 Quality Heat Treating (4407) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/17/2016 0:00 Solar Atmospheres of California (10486) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/17/2016 0:00 Solar Atmospheres of California (10486) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/17/2016 0:00 Solar Atmospheres of California (10486) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/17/2016 0:00 Solar Atmospheres of California (10486) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/17/2016 0:00 Solar Atmospheres of California (10486) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/17/2016 0:00 Superior Plating Inc - CA (4556) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/17/2016 0:00 Superior Plating Inc - CA (4556) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

3/17/2016 0:00 Superior Plating Inc - CA (4556) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

3/17/2016 0:00 Coast Plating Inc (4572) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/17/2016 0:00 Hadd-Co Inspection Laboratory (4223) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/16/2016 0:00 Ultraspec Finishing Inc. (4686) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MMC-152 Approved Spec Added

3/15/2016 0:00 Aerocraft Heat Treating Co., Inc. (3112) HT - HEAT TREAT AMS-2759/1 Approved Spec Added





3/15/2016 0:00 Aerocraft Heat Treating Co., Inc. (3112) HT - HEAT TREAT AMS-2774 Approved Spec Added

3/15/2016 0:00 Aremac Heat Treating (3044) HT - HEAT TREAT AMS-2759/2 Approved Spec Added






3/15/2016 0:00 Aremac Heat Treating (3044) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/15/2016 0:00 Barry Avenue Plating (3067) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

3/15/2016 0:00 Black Oxide Industries Inc (4326) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/15/2016 0:00 Black Oxide Industries Inc (4326) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DLT-13924 Approved Spec Added

3/15/2016 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/15/2016 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)HT - HEAT TREAT AMS-2759/1 Approved Spec Added



3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

Page (69) of (128)


Printed: 12/14/2018

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP09 - PLATING, THIN DENSE CHROME AMS-2438 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)HT - HEAT TREAT AMS-2774 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/15/2016 0:00 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. (7228)NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/15/2016 0:00 Qingan Group Joint Venture AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/15/2016 0:00 CPP - Steel Treaters Inc. (3804) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/15/2016 0:00 CPP - Steel Treaters Inc. (3804) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/15/2016 0:00 CPP - Steel Treaters Inc. (3804) HT - HEAT TREAT AMS-2774 Approved Spec Added



3/15/2016 0:00 3P Processing, Inc. (3310) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/15/2016 0:00 3P Processing, Inc. (3310) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/15/2016 0:00 Accurate Brazing (3093) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/15/2016 0:00 Accurate Brazing (3093) HT - HEAT TREAT AMS-2759/3 Approved Spec Added



3/15/2016 0:00 Accurate Brazing (3093) HT - HEAT TREAT AMS-2774 Approved Spec Added

3/15/2016 0:00 Accurate Brazing (3093) HT - HEAT TREAT AMS-H-7199 Approved Spec Added

3/15/2016 0:00 AH Plating (4930) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

3/15/2016 0:00 AH Plating (4930) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/15/2016 0:00 AH Plating (4930) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/15/2016 0:00 Alumiplate Inc. CP09 - PLATING, ALUMINUM (Alumiplate®) MIL-DTL-83488 Approved Spec Added

3/15/2016 0:00 Alumiplate Inc. AQS - QUALITY SYSTEM AQS Approved Spec Added

3/15/2016 0:00 Aremac Heat Treating (3044) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification

3/15/2016 0:00 Asko Processing, Inc. (3049) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/14/2016 0:00 Magellan Aerospace (Polska) (8232) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/14/2016 0:00 Magellan Aerospace (Polska) (8232) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

Page (70) of (128)


Printed: 12/14/2018

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/11/2016 0:00 Ankit Fasteners Pvt Ltd (9122) CP09 - PLATING, SILVER AMS-2411 Approved Spec Added

3/11/2016 0:00 Praxair Surface Tech. - Indianapolis (3707) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

3/11/2016 0:00 Praxair Surface Tech. - Indianapolis (3707) CT - PLASMA ARC SPRAY MMC-275 Approved Spec Added

3/11/2016 0:00 Praxair Surface Tech. - Indianapolis (3707) CP01 - COATING, CERAMIC METALLIC (SERMETEL®) E.S. 6.185 Inactive Spec Removed

3/11/2016 0:00 Praxair Surface Technologies - CT (3770) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 Praxair Surface Technologies - CT (3770) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/11/2016 0:00 Ross Aluminum Castings LLC (3755) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 Ross Aluminum Castings LLC (3755) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/11/2016 0:00 Ross Aluminum Castings LLC (3755) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/11/2016 0:00 Ross Aluminum Castings LLC (3755) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, COPPER AMS-2418 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP09 - PLATING, SILVER AMS-2410 Approved Spec Added

3/11/2016 0:00 SPS Technologies/Aerospace Products (3799) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/11/2016 0:00 Twist, Inc. HT - STRESS RELIEF AMS-2759/11 Not Approved Spec Added

3/11/2016 0:00 Voss Industries (3430) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/11/2016 0:00 Voss Industries (3430) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/11/2016 0:00 Voss Industries (3430) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/11/2016 0:00 Voss Industries (3430) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/11/2016 0:00 Voss Industries (3430) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/11/2016 0:00 Twist, Inc. AQS - QUALITY SYSTEM ISO9001 Approved Spec Added

3/9/2016 0:00 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/4/2016 0:00 Praxair Surface Tech. - Indianapolis (3707) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/4/2016 0:00 Vac-Met Inc. (3422) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/4/2016 0:00 EATON AEROQUIP (JACKSON) (3642) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/4/2016 0:00 EATON AEROQUIP (JACKSON) (3642) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

3/4/2016 0:00 EATON AEROQUIP (JACKSON) (3642) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/4/2016 0:00 Hitchiner Mfg Company Ferrous (3171) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/4/2016 0:00 Hitchiner Mfg Company Ferrous (3171) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/4/2016 0:00 Hitchiner Mfg Company Ferrous (3171) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/4/2016 0:00 Hitchiner Mfg Company Ferrous (3171) WLD - WELDING AWS-D17.1 Approved Spec Added

3/4/2016 0:00 Hoosier Spring Co., Inc (3181) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/4/2016 0:00 Hoosier Spring Co., Inc (3181) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

Page (71) of (128)


Printed: 12/14/2018



3/4/2016 0:00 Hoosier Spring Co., Inc (3181) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/4/2016 0:00 Lite Metals Company (5525) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/4/2016 0:00 Lite Metals Company (5525) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/4/2016 0:00 Lite Metals Company (5525) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/4/2016 0:00 Lite Metals Company (5525) HT - HEAT TREAT AMS-2768 Approved Spec Added

3/4/2016 0:00 Lite Metals Company (5525) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/4/2016 0:00 Metaltek Industries Inc NA - COATING, VACUUM IMPREGNATED CHROME MIL-STD-276 Not Approved Spec Removed

3/4/2016 0:00 Praxair Surface Tech. - Indianapolis (3707) CT - HVOF AMS-2447 Approved Spec Added

3/3/2016 0:00 Alphacasting Inc. (5168) WLD - WELDING AWS-D17.1 Approved Spec Added

3/3/2016 0:00 Mecaero SNC (3821) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 Mecaero SNC (3821) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/3/2016 0:00 Mecaero SNC (3821) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/3/2016 0:00 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 Kamensk Uralsky Metallurgical Works J.S.Co. (7390) HT - HEAT TREAT AMS-2772 Approved Spec Added

3/3/2016 0:00 Consolidated Precision Products CPP - Syracuse (3151) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 Consolidated Precision Products CPP - Syracuse (3151) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/3/2016 0:00 Consolidated Precision Products CPP - Syracuse (3151) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/3/2016 0:00 O'Fallon Casting LLC (3172) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 O'Fallon Casting LLC (3172) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/3/2016 0:00 O'Fallon Casting LLC (3172) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/3/2016 0:00 O'Fallon Casting LLC (3172) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) HT - HEAT TREAT AMS-2774 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) CP09 - PLATING, NICKEL - Cadmium Diffused AMS-2416 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/3/2016 0:00 P.B. Fasteners (4949) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/3/2016 0:00 PCC Structurals – San Leandro (3456) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/3/2016 0:00 PCC Structurals – San Leandro (3456) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/3/2016 0:00 PCC Structurals – San Leandro (3456) CP12 - PASSIVATION AMS-2700 Not Approved Spec Modification

3/3/2016 0:00 PCC Structurals – San Leandro (3456) WLD - WELDING AWS-D17.1 Approved Spec Modification

3/3/2016 0:00 Weber Metals, Inc. (4218) HT - HEAT TREAT AMS-2759/11 Approved Spec Added

3/3/2016 0:00 National Rivet & Mfg Co HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/3/2016 0:00 National Rivet & Mfg Co AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Added

3/3/2016 0:00 Industrial Tectonics Bearings Inc. (4100) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added






3/3/2016 0:00 PCC Structurals – San Leandro (3456) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/3/2016 0:00 PCC Structurals – San Leandro (3456) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/3/2016 0:00 PCC Structurals – San Leandro (3456) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

Page (72) of (128)


Printed: 12/14/2018

3/3/2016 0:00 PCC Structurals – San Leandro (3456) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2016 0:00 Alphacasting Inc. (5168) HT - HEAT TREAT AMS-2759 Approved Spec Removed

3/2/2016 0:00 CIRCOR Aerospace Inc. (4581) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/2/2016 0:00 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

3/2/2016 0:00 CIRCOR Aerospace Inc. (4581) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/2/2016 0:00 Doncasters Southern Tool (4425) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/2/2016 0:00 Doncasters Southern Tool (4425) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/1/2016 0:00 Aerospace Metal Finishing (4994) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Inactive Spec Removed

3/1/2016 0:00 Michigan Spline Gage Co NA - CALIBRATION ISO 17025 Inactive Spec Removed

2/25/2016 0:00 Manufacturing Technology, Inc. (old site) WLD - WELDING MIL-STD-1252 Approved Spec Modification

2/25/2016 0:00 Manufacturing Technology, Inc. (old site) WLD - WELDING CPC-5306 Approved Spec Added

2/25/2016 0:00 HOWMET GEORGETOWN, ALCOA LTD - CAD HT - HEAT TREAT AMS-2771 Inactive Spec Removed

2/25/2016 0:00 HOWMET GEORGETOWN, ALCOA LTD - CAD NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/25/2016 0:00 HOWMET GEORGETOWN, ALCOA LTD - CAD NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

2/25/2016 0:00 HOWMET GEORGETOWN, ALCOA LTD - CAD AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

2/25/2016 0:00 Signature Aerospace (5424) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

2/25/2016 0:00 Signature Aerospace (5424) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/25/2016 0:00 Manufacturing Technology, Inc. (old site) WLD - WELDING LGPS-5002 Approved Spec Modification

2/16/2016 0:00 Praxair Surface Tech. - Compton (3768) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

2/12/2016 0:00 Wyman-Gordon-SC (12283) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/12/2016 0:00 Wyman-Gordon-SC (12283) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

2/12/2016 0:00 Wyman-Gordon-SC (12283) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

2/12/2016 0:00 Wyman-Gordon-SC (12283) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

2/11/2016 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, COPPER AMS-2418 Inactive Spec Removed

2/5/2016 0:00 Bodycote Ida - Wichita (4543) AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

2/5/2016 0:00 Bodycote Ida - Wichita (4543) HT - HEAT TREAT AMS-2759/3 Inactive Spec Removed

2/4/2016 0:00 Cygnus, Inc. (4388) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

2/1/2016 0:00 Westmoreland Mechanical Testing (3445) NA - LABORATORY / TESTING AC7101 Approved Spec Modification

1/30/2016 0:00 MAMESTA B.V. HT - HEAT TREAT MM-4995 Not Approved

1/28/2016 0:00 Metal Finishing Co. - Murdock (8500) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/26/2016 0:00 Alta Precision Inc. Site 2 AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

1/26/2016 0:00 Alta Precision Inc. Site 2 CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

1/19/2016 0:00 Tecnickrome Aeronautique Inc. (4760) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

1/19/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

1/18/2016 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

1/15/2016 0:00 Thoni Alutec Sp. z o.o. (10189) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

1/14/2016 0:00 Sermatech Power Solutions LP CP01 - COATING, CERAMIC METALLIC (SERMETEL®) MMC-370 Inactive Spec Removed

1/14/2016 0:00 Sermatech Power Solutions LP AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

1/5/2016 0:00 Strite Precision Machining Ltd. (12234) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

1/5/2016 0:00 Strite Precision Machining Ltd. (12234) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

1/5/2016 0:00 Strite Precision Machining Ltd. (12234) CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

12/31/2015 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

Page (73) of (128)


Printed: 12/14/2018

12/31/2015 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

12/31/2015 0:00 Takabayashi Mfg. Co. Ltd. (10827) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

12/31/2015 0:00 Takabayashi Mfg. Co. Ltd. (10827) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

12/29/2015 0:00 Asashita Mekki Co., Ltd. (10370) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

12/29/2015 0:00 Asashita Mekki Co., Ltd. (10370) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

12/21/2015 0:00 BODYCOTE BELGIUM (5610) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

12/21/2015 0:00 Sierra Spray Painting Ltd. (11458) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

12/21/2015 0:00 Sierra Spray Painting Ltd. (11458) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, NICKEL MMC-287 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) SE - SHOT PEEN MM-5534 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) SE - SHOT PEEN CP-0340 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) SE - SHOT PEEN BP-105 Inactive Spec Removed

12/18/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

12/18/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

12/18/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CHROME PS-1033 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MM-4951 (Superseded by LGPS 1100) Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MM-4950 Approved Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CHROME MMC-273 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP01 - COATING, PAINT APPLICATION MIL-STD-7179 Inactive Spec Removed

12/18/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP13 - PLATING, BRUSH CADMIUM CPC-8215 Inactive Spec Removed

12/18/2015 0:00 TECHNIPRODEC LIMITED CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

12/18/2015 0:00 TECHNIPRODEC LIMITED CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/18/2015 0:00 TECHNIPRODEC LIMITED AQS - QUALITY SYSTEM AS 9100 Spec Removed

12/18/2015 0:00 LEESTA INDUSTRIES AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT LGPS-2002 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT MMC-214 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT MMC-198 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT AMS-S-6090 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT MMC-160 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT CPC-6203 Inactive Spec Removed


12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT AMS-2759/6 Inactive Spec Removed



12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT AMS-S-6090 Inactive Spec Removed



12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT MM-4990 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT CP-0390 Inactive Spec Removed





12/18/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT MM-4995 Not Approved Spec Removed


Page (74) of (128)


Printed: 12/14/2018




12/18/2015 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING MMC-131 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING MMC-187 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING AMS-2681 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING AMS-2680 Inactive Spec Removed

12/18/2015 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT MM-5744 Inactive Spec Removed

12/18/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, NICKEL MMC-287 Inactive Spec Removed

12/18/2015 0:00 Ultraspec Finishing Inc. (4686) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/18/2015 0:00 Lego Finishing Center Inc. CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Inactive Spec Removed

12/18/2015 0:00 Lego Finishing Center Inc. CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Inactive Spec Removed

12/18/2015 0:00 LEESTA INDUSTRIES CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

12/18/2015 0:00 LEESTA INDUSTRIES CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/18/2015 0:00 HDI Landing Gear - Springfield CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/18/2015 0:00 HDI Landing Gear - Springfield CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

12/18/2015 0:00 C. P. S. INDUSTRIES INC. CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

12/18/2015 0:00 C. P. S. INDUSTRIES INC. CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/18/2015 0:00 Magellan Aerospace, New York, Inc. CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/18/2015 0:00 Magellan Aerospace, New York, Inc. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

12/18/2015 0:00 Anodizing & Paint TNM Inc. (4687) CP01 - COATING, DRY FILM MM-1920 Inactive Spec Removed

12/18/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

12/17/2015 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

12/17/2015 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Inactive Spec Removed

12/17/2015 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP01 - COATING, PAINT APPLICATION MIL-P-23377 Inactive Spec Removed

12/17/2015 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

12/17/2015 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Inactive Spec Removed

12/17/2015 0:00 Lakshmi Machine Works Limited CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) AMS-2470 Inactive Spec Removed

12/17/2015 0:00 M/s Therelek Engineers Private Limited (5999) HT - HEAT TREAT MIL-H-6088 Inactive Spec Removed

12/17/2015 0:00 Exactatherm Ltd. (4642) HT - HEAT TREAT AMS-2759/4 Approved Spec Added


12/17/2015 0:00 Magellan Aerospace-Kitchener CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Inactive Spec Removed

12/17/2015 0:00 Magellan Aerospace-Kitchener HT - STRESS RELIEF AMS-2759 Inactive Spec Removed

12/17/2015 0:00 Magellan Aerospace-Kitchener NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

12/17/2015 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, NICKEL AMS-2403 Inactive Spec Removed

12/17/2015 0:00 Noranco – Vaughan Division (12266) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Modification

12/17/2015 0:00 Noranco – Vaughan Division (12266) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Modification

12/17/2015 0:00 Hanwha TechM NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

12/17/2015 0:00 Hanwha TechM AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

12/17/2015 0:00 Hanwha TechM NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

12/17/2015 0:00 Hanwha TechM CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

Page (75) of (128)


Printed: 12/14/2018

12/17/2015 0:00 Hanwha TechM CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

12/17/2015 0:00 Hanwha TechM SE - SHOT PEEN AMS-2430 Inactive Spec Removed

12/17/2015 0:00 Hanwha TechM HT - HEAT TREAT AMS-2759/1 Inactive Spec Removed




12/17/2015 0:00 Hanwha TechM CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

12/17/2015 0:00 SPECIALIZED WELDING & FABRICATION AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

12/17/2015 0:00 SPECIALIZED WELDING & FABRICATION WLD - WELDING CPC-5204 Inactive Spec Removed

12/17/2015 0:00 SPECIALIZED WELDING & FABRICATION WLD - WELDING AMS-STD-2219 Inactive Spec Removed

12/17/2015 0:00 SPECIALIZED WELDING & FABRICATION WLD - WELDING AWS-D17.1 Inactive Spec Removed

12/16/2015 0:00 Secondo Mona (7808) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

12/10/2015 0:00 PAS Technologies - Phoenix (3378) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Modification

12/10/2015 0:00 PAS Technologies - Phoenix (3378) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Modification

12/9/2015 0:00 Ultraspec Finishing Inc. (4686) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

12/9/2015 0:00 Ultraspec Finishing Inc. (4686) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

12/9/2015 0:00 Ultraspec Finishing Inc. (4686) CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107 Approved Spec Added

12/9/2015 0:00 Ultraspec Finishing Inc. (4686) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

12/9/2015 0:00 Ultraspec Finishing Inc. (4686) SE - FLAPPER / ROTO PEENING MIL-R-81841 Approved Spec Added

12/8/2015 0:00 W Pat Crow Forgings (4177) HT - HEAT TREAT AMS-2770 Approved Spec Added

12/8/2015 0:00 W Pat Crow Forgings (4177) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

12/2/2015 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, SILVER ASTM-B-700 Inactive Spec Removed

12/2/2015 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP14 - STRIPPING, HVOF LGPS-1300 Inactive Spec Removed

12/2/2015 0:00 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

11/19/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CMSP - GRINDING, CHROME MM-4990 Approved Spec Added

11/17/2015 0:00 Heroux Devtek Kitchener CMSP - GRINDING, CHROME MIL-STD-866 Approved

11/17/2015 0:00 Heroux Devtek Kitchener CMSP - GRINDING, CHROME LGPS-7000 Approved

11/12/2015 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Removed

11/10/2015 0:00 Ultraspec Finishing Inc. (4686) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

11/6/2015 0:00 International Hardcoat Inc. (3259) CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric Acid LGPS-1109 Not Approved Spec Removed

11/5/2015 0:00 Taylor Certified Processing, Inc. (5114) CP12 - PASSIVATION AMS-2700 Approved Spec Added

11/5/2015 0:00 Taylor Certified Processing, Inc. (5114) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

11/3/2015 0:00 Southwest United Canada Inc.(4197) CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric Acid LGPS-1109 Approved Spec Added

11/3/2015 0:00 Aerospace Metal Finishing (4994) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

10/27/2015 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT AMS-2759/4 Approved Spec Added



10/15/2015 0:00 Sumitomo Precision Products Co. Ltd. (5058) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Modification

10/15/2015 0:00 Sumitomo Precision Products Co. Ltd. (5058) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

10/6/2015 0:00 Electrolizing, Inc. (4228) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

10/1/2015 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/1/2015 0:00 MID-AMERICAN PRECISION PRODUCTS CP01 - COATING, PAINT APPLICATION LGPS-1001 Not Approved Spec Removed

10/1/2015 0:00 MID-AMERICAN PRECISION PRODUCTS CP01 - COATING, PAINT APPLICATION MIL-F-18264 Not Approved Spec Removed

10/1/2015 0:00 LEFIELL AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

10/1/2015 0:00 MID-AMERICAN PRECISION PRODUCTS CP01 - COATING, PAINT APPLICATION BR-167 Not Approved Spec Removed

9/21/2015 0:00 Clackamas Tool Welding (6035) WLD - BRAZING RI-325 Approved Spec Added

8/18/2015 0:00 Sonic Industries NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

8/18/2015 0:00 Sonic Industries NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

Page (76) of (128)


Printed: 12/14/2018

8/18/2015 0:00 Sonic Industries AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

8/17/2015 0:00 Aerospace Metal Finishing (4994) CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric Acid LGPS-1109 Approved Spec Added

7/31/2015 0:00 St Louis Metallizing NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Removed

7/23/2015 0:00 Nippon Precision Casting Corp. (5418) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/23/2015 0:00 Nippon Precision Casting Corp. (5418) WLD - WELDING AMS-2694 Approved Spec Added

7/23/2015 0:00 Nippon Precision Casting Corp. (5418) WLD - WELDING AWS-D17.1 Approved Spec Added

7/22/2015 0:00 Toko Tekko Co., Ltd (11776) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

7/22/2015 0:00 Toko Tekko Co., Ltd (11776) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

7/14/2015 0:00 Omni Metal Finishing Inc. (3241) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/14/2015 0:00 Omni Metal Finishing Inc. (3241) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

7/14/2015 0:00 Omni Metal Finishing Inc. (3241) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

7/9/2015 0:00 Omni Metal Finishing Inc. (3241) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/9/2015 0:00 Omni Metal Finishing Inc. (3241) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

7/8/2015 0:00 La Nitruration Moderne SA (7245) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/8/2015 0:00 La Nitruration Moderne SA (7245) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

7/8/2015 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

7/6/2015 0:00 Dioxid Sp. Z o.o. (12271) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/6/2015 0:00 Dioxid Sp. Z o.o. (12271) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

7/6/2015 0:00 Dioxid Sp. Z o.o. (12271) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

6/29/2015 0:00 ASCO Industries (5321) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

6/29/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

6/29/2015 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-2759/1 Approved Spec Added







6/29/2015 0:00 Tekalia Aeronautik (2010) Inc (7875) SE - FLAPPER / ROTO PEENING MIL-R-81841 Superceded Spec Removed

6/29/2015 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-S-6090 Inactive Spec Removed

6/29/2015 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-2759 Inactive Spec Removed

6/29/2015 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT MMC-179 Inactive Spec Removed

6/29/2015 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT MMC-168 Inactive Spec Removed

6/9/2015 0:00 St Louis Metallizing CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

6/9/2015 0:00 St Louis Metallizing CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear HT - HEAT TREAT AMS-2759/1 Inactive Spec Removed





6/8/2015 0:00 Arrow Gear HT - STRESS RELIEF AMS-2759/11 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear HT - HEAT TREAT MMC-207 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear HT - HEAT TREAT AMS-2759 Inactive Spec Removed

6/8/2015 0:00 Arrow Gear NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

Page (77) of (128)


Printed: 12/14/2018

6/3/2015 0:00 zzz do not use Firth Rixson Forgings Ltd (4152) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/3/2015 0:00 zzz do not use Firth Rixson Forgings Ltd (4152) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

6/1/2015 0:00 NMG Aerospace - OH (4563) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/1/2015 0:00 NMG Aerospace - OH (4563) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

5/27/2015 0:00 Applus RTD Canada - Burlington (4740) NDT - INSPECTION, RADIOGRAPHIC MMC-142 Inactive Spec Removed

5/21/2015 0:00 Praxair Surface Technologies K. K (7339) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

5/20/2015 0:00 Aerospace Welding Inc. - California (4473) WLD - WELDING ISO 15614-13 Approved Spec Modification

5/20/2015 0:00 Aerospace Welding Inc. - California (4473) WLD - WELDING AWS-D17.2 Approved Spec Modification

5/19/2015 0:00 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

5/8/2015 0:00 Embee Processing, LLC. (3337) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108 Approved Spec Modification

4/29/2015 0:00 Win-Tech, Inc. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Removed

4/29/2015 0:00 Win-Tech, Inc. CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Removed

4/29/2015 0:00 Win-Tech, Inc. AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

4/27/2015 0:00 Kaji Metal LTD. (5400) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

4/24/2015 0:00 Techmetals, Inc (4210) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

4/24/2015 0:00 Poly Metal Finishing, Inc. (3705) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

4/24/2015 0:00 AeroTek Manufacturing Limited - CAD (4434) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

4/24/2015 0:00 International Hardcoat Inc. (3259) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

4/20/2015 0:00 Tecnickrome Aeronautique Inc. (4760) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108 Approved Spec Added

4/17/2015 0:00 RBC Transport Dynamics (4312) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/9/2015 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

3/23/2015 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




3/19/2015 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

3/16/2015 0:00 Noranco – Woodbridge Division AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/10/2015 0:00 Element Materials Technology Rancho Dominguez (3657) NDT - INSPECTION, ULTRASONIC CPC-9104 Approved Spec Added

2/23/2015 0:00 Oerlikon Balzers Coating UK (9977) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP12 - PASSIVATION AMS-2700 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP12 - PASSIVATION ASTM-A-380 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/20/2015 0:00 Vijaya Metal Finishers (8870) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

2/16/2015 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

2/10/2015 0:00 TECT - Cleveland HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

2/10/2015 0:00 TECT - Cleveland AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

2/2/2015 0:00 Secondo Mona (7808) HT - HEAT TREAT AMS-2759/1 Approved Spec Added



2/2/2015 0:00 Secondo Mona (7808) CP12 - PASSIVATION AMS-2700 Approved Spec Added

Page (78) of (128)


Printed: 12/14/2018

2/2/2015 0:00 Secondo Mona (7808) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

2/2/2015 0:00 Secondo Mona (7808) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

2/2/2015 0:00 Secondo Mona (7808) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/2/2015 0:00 Secondo Mona (7808) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

1/22/2015 0:00 Sogo Spring Mfg. (7011) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Modification

1/8/2015 0:00 Incertec CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Removed

1/8/2015 0:00 Incertec AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

1/5/2015 0:00 Terauchi Manufacturing Co. Ltd. (7864) AQS - QUALITY SYSTEM AS 9100 Approved

12/19/2014 0:00 Techmetals, Inc (4210) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP12 - PASSIVATION AMS-2700 Approved Spec Added

12/19/2014 0:00 Techmetals, Inc (4210) CP12 - PASSIVATION AMS-QQ-P-35 Approved Spec Added

12/18/2014 0:00 Taylor Certified Processing, Inc. (5114) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

12/10/2014 0:00 UTC Aerospace Systems Wroclaw Sp. z o.o. (5245) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/3/2014 0:00 Mecaer Aviation Group S.p.A. (10206) HT - HEAT TREAT AMS-2770 Approved Spec Added

11/3/2014 0:00 Mecaer Aviation Group S.p.A. (10206) HT - HEAT TREAT AMS-2772 Approved Spec Added

11/3/2014 0:00 Mecaer Aviation Group S.p.A. (10206) HT - HEAT TREAT MIL-H-6088 Not Approved Spec Removed

10/29/2014 0:00 Asko Processing, Inc. (3049) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Modification

10/29/2014 0:00 Asko Processing, Inc. (3049) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Modification

10/29/2014 0:00 VSMPO-AVISMA Corporation (4653) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

10/29/2014 0:00 ATI ZKM Forging sp. z o.o. (8184) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

10/28/2014 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT CP-0540 Approved Spec Removed

10/28/2014 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT AMS-2771 Inactive Spec Removed

10/27/2014 0:00 Consolidated Precision Products - Cudahy (3585) NDT - INSPECTION, RADIOGRAPHIC AMS-2175 Inactive Spec Removed

10/17/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

10/15/2014 0:00 ESNA - Fitz Aerospace (9471) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/15/2014 0:00 ESNA - Fitz Aerospace (9471) CP12 - PASSIVATION AMS-2700 Approved Spec Added

10/15/2014 0:00 ESNA - Fitz Aerospace (9471) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

10/15/2014 0:00 ESNA - Fitz Aerospace (9471) CP09 - PLATING, ZINC NICKEL AMS-2417 Approved Spec Added

10/15/2014 0:00 ESNA - Fitz Aerospace (9471) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/10/2014 0:00 VSMPO-AVISMA Corporation (4653) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

10/6/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CHROME LGPS-1101 Approved Spec Added

10/3/2014 0:00 Mikron Muhendislik Ltd.Sti. (7381) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/3/2014 0:00 Alp Aviation (7440) CP09 - PLATING, CHROME LGPS-1101 Approved Spec Added

10/2/2014 0:00 Kryler Corp. (4377) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

10/2/2014 0:00 Asko Processing, Inc. (3049) NDT - INSPECTION, LIQUID PENETRANT MM-4971 Inactive Spec Removed

10/1/2014 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

Page (79) of (128)


Printed: 12/14/2018

9/24/2014 0:00 North East Finishing Co (4560) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP12 - PASSIVATION AMS-2700 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

9/24/2014 0:00 North East Finishing Co (4560) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

9/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, NICKEL MMC-287 Inactive Spec Removed

9/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CHROME MMC-273 Inactive Spec Removed

9/18/2014 0:00 Goodrich Actuation Systems - Wolverhampton (5918) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. CP01 - COATING, DRY FILM AS-5528 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

9/5/2014 0:00 Controlled Coatings, Inc. AQS - QUALITY SYSTEM AC7004 Approved Spec Added

9/4/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) HT - STRESS RELIEF AMS-2759/1 Approved Spec Added




9/4/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) HT - STRESS RELIEF AMS-H-6875 Approved Spec Added

8/14/2014 0:00 HITEMCO (3173) CT - GRINDING, HVOF LGPS-7013 Approved Spec Added

8/13/2014 0:00 Aerospace Metal Finishing (4994) HT - HEAT TREAT AMS-2759/11 Approved Spec Modification

7/16/2014 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

7/15/2014 0:00 Nippon Precision Casting Corp. (5418) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

7/11/2014 0:00 All Metals Processing of Orange County, LLC (3320) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

7/11/2014 0:00 ALS Tribology aka ALS Stavely Services NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

7/10/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

7/10/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

7/10/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) HT - HEAT TREAT BP-124 Approved Spec Added

7/10/2014 0:00 Nitrex Metal Technologies – A Division of Bodycote Heat Treatment Canada Inc. (8772)HT - HEAT TREAT AMS-2759/6 Approved Spec Added

7/10/2014 0:00 Nitrex Metal Technologies – A Division of Bodycote Heat Treatment Canada Inc. (8772)HT - HEAT TREAT AMS-2759/10 Approved Spec Added

7/10/2014 0:00 Nitrex Metal Technologies – A Division of Bodycote Heat Treatment Canada Inc. (8772)AQS - QUALITY SYSTEM AC7004 Approved Spec Added

6/26/2014 0:00 Fonderies et Ateliers du Belier (6870) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/9/2014 0:00 Honeywell Aerospace Yeovil UK CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Pulled Spec Removed

6/9/2014 0:00 Honeywell Aerospace Yeovil UK NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Pulled Spec Removed

6/9/2014 0:00 Honeywell Aerospace Yeovil UK NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Pulled Spec Removed

6/9/2014 0:00 Honeywell Aerospace Yeovil UK CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Pulled Spec Removed

6/9/2014 0:00 Honeywell Aerospace Yeovil UK HT - STRESS RELIEF AMS-H-6875 Pulled Spec Removed

6/9/2014 0:00 Honeywell Aerospace Yeovil UK CP12 - PASSIVATION AMS-2700 Pulled Spec Removed

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

Page (80) of (128)


Printed: 12/14/2018

5/22/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

5/21/2014 0:00 METAL IMPROVEMENT CO. - Twinsburg (5229) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

5/21/2014 0:00 Merrill Aviation Inc. (10259) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

5/20/2014 0:00 Southwest United Industries, Inc. (4185) CMSP - GRINDING, HVOF LGPS-7013 Approved Spec Added

5/20/2014 0:00 Electrolizing, Inc. (4228) CP09 - PLATING, CHROME AMS-2438 Approved Spec Added

5/19/2014 0:00 RBC AeroStructures (11247) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification


4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - PASSIVATION MIL-S-5002 Superceded Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, DRY FILM MM-1920 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CP-0330 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/21/2014 0:00 Hi-Tech Metal Finishing, Inc. (11426) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

4/11/2014 0:00 Online Graphics & Finishing (10635) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/11/2014 0:00 Online Graphics & Finishing (10635) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

4/11/2014 0:00 Icore International - Mexico (11313) AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Added

4/11/2014 0:00 Icore International - Mexico (11313) WLD - WELDING AWS-D17.1 Approved Spec Added

4/9/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/8/2014 0:00 Alumiplate Inc. CP09 - PLATING, ALUMINUM (Alumiplate®) LGPS-1105 Inactive Spec Removed

4/7/2014 0:00 Ultraspec Finishing Inc. (4686) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

4/4/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/31/2014 0:00 Takabayashi Mfg. Co. Ltd. (10827) SE - SHOT PEEN AMS-2430 Approved Spec Added

3/28/2014 0:00 GALVAIR srl, (7419) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/27/2014 0:00 Firth Rixson Forgings Ltd. River Don (4752) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/27/2014 0:00 Firth Rixson Forgings Ltd. River Don (4752) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/27/2014 0:00 zzz do not use Firth Rixson Forgings Ltd (4152) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/26/2014 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - HEAT TREAT BP-106 Approved Spec Added

3/25/2014 0:00 Superior Thread Rolling Co. AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

3/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Approved Spec Added

3/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

3/24/2014 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

Page (81) of (128)


Printed: 12/14/2018

3/20/2014 0:00 Southwest United Industries, Inc. (4185) SE - FLAPPER / ROTO PEENING MIL-R-81841 Superceded Spec Added

3/20/2014 0:00 Merrill Fabricators CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

3/6/2014 0:00 Vandergriff Technologies NDT Services (4524) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/6/2014 0:00 Indo-MIM Pvt.Ltd.(10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842) Indo-MIM Private Ltd. (10842)CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Inactive Spec Removed

2/20/2014 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-2772 Approved Spec Added

2/18/2014 0:00 Alaxia Aerosystems CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Added

2/18/2014 0:00 Alaxia Aerosystems AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

2/18/2014 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

2/17/2014 0:00 AVIC Aircraft Corporation Xian Aircraft Company HT - HEAT TREAT AMS-2759/3 Inactive Spec Modification



2/17/2014 0:00 AVIC Aircraft Corporation Xian Aircraft Company HT - HEAT TREAT AMS-2759 Inactive Spec Modification

2/17/2014 0:00 AVIC Aircraft Corporation Xian Aircraft Company SE - SHOT PEEN AMS-2430 Inactive Spec Modification

2/17/2014 0:00 Southwest Aluminum (Group) Co. Ltd. HT - HEAT TREAT AMS-H-6088 Inactive Spec Modification

2/17/2014 0:00 Southwest Aluminum (Group) Co. Ltd. NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Modification

2/17/2014 0:00 Southwest Aluminum (Group) Co. Ltd. NDT - INSPECTION, ULTRASONIC CPC-9104 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp HT - HEAT TREAT AMS-2759/3 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp HT - HEAT TREAT AMS-H-6875 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp NA - LABORATORY / TESTING A2LA Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CADMIUM-TITANIUM CPC-8225 Not Approved Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP09 - PLATING, CHROME AMS-2460 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp AQS - QUALITY SYSTEM AS 9100 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp SE - SHOT PEEN AMS-S-13165 Superceded Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp SE - SHOT PEEN AMS-2430 Inactive Spec Modification

2/17/2014 0:00 Landing-Gear Advanced Manufacturing Corp CP12 - PASSIVATION AMS-2700 Inactive Spec Modification

2/10/2014 0:00 PRAXAIR SURFACE TECH. - Swindon CT - HVOF LGPS-1301 Inactive

2/10/2014 0:00 PRAXAIR SURFACE TECH. - Swindon CMSP - GRINDING, HVOF LGPS-7010 Inactive

2/10/2014 0:00 PRAXAIR SURFACE TECH. - Swindon CP14 - STRIPPING, HVOF LGPS-1300 Inactive Spec Modification

2/10/2014 0:00 PRAXAIR SURFACE TECH. - Swindon AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

2/10/2014 0:00 Fokker Landing Gear B.V. (7454) CMSP - GRINDING, CHROME MM-4990-5 Approved Spec Added

2/3/2014 0:00 Stack Metallurgical Services, Inc. (3801) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/30/2014 0:00 Brenco Aerospace Pty. Ltd AQS - QUALITY SYSTEM AC7004 Not Approved Spec Added

1/30/2014 0:00 Brenco Aerospace Pty. Ltd CT - HVOF LGPS1301 Not Approved Spec Added

1/16/2014 0:00 American Stress Technologies NA - LABORATORY / TESTING ISO 10012-1 Approved Spec Added

Page (82) of (128)


Printed: 12/14/2018

1/15/2014 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, CHROME AMS-2438 Approved Spec Added

1/15/2014 0:00 Lambda Technologies NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

1/15/2014 0:00 Instron NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

1/15/2014 0:00 Westmoreland Mechanical Testing (3445) NA - LABORATORY / TESTING A2LA Approved Spec Added

1/14/2014 0:00 Southwest United Canada Inc.(4197) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

1/14/2014 0:00 Jet Processing - Div of PCC (3269) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

1/13/2014 0:00 Southwest United Industries, Inc. (4185) AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Added

1/8/2014 0:00 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

1/8/2014 0:00 X-R-I Testing AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

1/3/2014 0:00 Shaanxi Hongyuan Aviation Forging Co.Ltd. (4992) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

12/12/2013 0:00 Abrasive Finishing Co. (5490) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

12/12/2013 0:00 Merrill Aviation Inc. (10259) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/12/2013 0:00 Merrill Aviation Inc. (10259) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

12/12/2013 0:00 Merrill Aviation Inc. (10259) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

12/10/2013 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT AMS-2759/4 Approved Spec Added


12/9/2013 0:00 Brampton Processing (4648) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

12/9/2013 0:00 Brampton Processing (4648) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

12/9/2013 0:00 Brampton Processing (4648) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

12/7/2013 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/6/2013 0:00 Metal Finishing Co. - Chihuahua (10847) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

12/6/2013 0:00 Metal Finishing Co. - Chihuahua (10847) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

12/3/2013 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - HEAT TREAT AMS-2759/6 Approved Spec Added

11/22/2013 0:00 Alphacasting Inc. (5168) HT - HEAT TREAT AMS-2771 Approved Spec Added

11/22/2013 0:00 Alphacasting Inc. (5168) WLD - WELDING AMS-2694 Approved Spec Added

11/19/2013 0:00 Metal Finishing Co. - Chihuahua (10847) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

11/19/2013 0:00 Metal Finishing Co. - Chihuahua (10847) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

11/14/2013 0:00 St Louis Metallizing CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

11/6/2013 0:00 PPI Aerospace LLC (Main) (3840) CP01 - COATING, DRY FILM MIL-PRF-46010 Not Approved Spec Removed

11/6/2013 0:00 Westfield Electroplating (3443) HT - HEAT TREAT AMS-2759/9 Inactive Spec Removed

11/5/2013 0:00 Fokker Landing Gear B.V. (7454) CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

10/29/2013 0:00 Impresa Aerospace, LLC (10372) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/28/2013 0:00 ATI Forged Products (3297) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

10/28/2013 0:00 ATI Forged Products (3297) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

10/28/2013 0:00 ATI Forged Products (3297) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/28/2013 0:00 ATI Forged Products (3297) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

10/24/2013 0:00 Taylor Certified Processing, Inc. (5114) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

10/18/2013 0:00 Precision CNC NA - ROLLER BURNISHING BR-163 Approved Spec Added

10/16/2013 0:00 Praxair Surface Tech. - Compton (3768) CP01 - COATING, CERAMIC METALLIC (SERMETEL®) See Limitations Inactive Spec Added

10/11/2013 0:00 Fukada Netsusyori Kogyo Co., Ltd. (10823) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

10/11/2013 0:00 Ogden Air Logistics (Hill AFB) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/11/2013 0:00 Embee Processing, LLC. (3337) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Modification

10/11/2013 0:00 Ogden Air Logistics (Hill AFB) NA - LABORATORY / TESTING A2LA Inactive Spec Modification

10/11/2013 0:00 Ogden Air Logistics (Hill AFB) CP14 - STRIPPING, HVOF LGPS-1300 Inactive Spec Modification

10/11/2013 0:00 Ogden Air Logistics (Hill AFB) CT - HVOF LGPS-1301 Inactive Spec Modification

10/11/2013 0:00 Ogden Air Logistics (Hill AFB) CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Modification

10/10/2013 0:00 Asashita Mekki Co., Ltd. (10370) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

10/10/2013 0:00 Asashita Mekki Co., Ltd. (10370) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

Page (83) of (128)


Printed: 12/14/2018

10/7/2013 0:00 Astro Aluminum Treating Co. (3051) HT - HEAT TREAT AMS-2772 Approved Spec Added

10/6/2013 0:00 Taylor Certified Processing, Inc. (5114) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

10/2/2013 0:00 GALVAIR srl, (7419) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

10/2/2013 0:00 GALVAIR srl, (7419) CP12 - PASSIVATION AMS-2700 Approved Spec Added

10/2/2013 0:00 GALVAIR srl, (7419) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP12 - PASSIVATION AMS-2700 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) SE - SHOT PEEN AMS-2430 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - Murdock (8500) CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - Murdock (8500) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - Murdock (8500) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - Murdock (8500) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - Murdock (8500) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Modification

9/30/2013 0:00 Metal Finishing Co. - McLean (3499) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Modification

9/25/2013 0:00 Globe Engineering Co. (4156) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added


9/23/2013 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

9/10/2013 0:00 Exactatherm Ltd. (4642) HT - HEAT TREAT AMS-2759/2 Approved Spec Modification

9/10/2013 0:00 Exactatherm Ltd. (4642) HT - HEAT TREAT AMS-2759/3 Approved Spec Modification

9/9/2013 0:00 Embee Processing, LLC. (3337) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MM-4922 Inactive Spec Removed

9/9/2013 0:00 AAA Plating & Inspection, Inc. (4342) CP07 - IVD, ALUMINUM MIL-DTL-83488 Inactive Spec Modification

9/9/2013 0:00 AAA Plating & Inspection, Inc. (4342) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MM-4922 Inactive Spec Removed

9/5/2013 0:00 Magnetic and Penetrant Services Company (4200) CP12 - PASSIVATION CP-0520 Superceded Spec Removed

8/30/2013 0:00 Vac-Met Inc. (3422) WLD - BRAZING RI-325 Approved Spec Modification

8/28/2013 0:00 Wellman Dynamics (3128) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/28/2013 0:00 Wellman Dynamics (3128) HT - HEAT TREAT AMS-2771 Approved Spec Added

8/28/2013 0:00 Wellman Dynamics (3128) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

8/28/2013 0:00 Wellman Dynamics (3128) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

8/20/2013 0:00 Continental Heat Treating Corp (3588) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/19/2013 0:00 Kryler Corp. (4377) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/14/2013 0:00 PAS Technologies - Kansas City (5202) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

8/14/2013 0:00 PAS Technologies - Kansas City (5202) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

8/5/2013 0:00 Aerospace Welding Inc. - Quebec (6347) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/5/2013 0:00 Aerospace Welding Inc. - Quebec (6347) WLD - WELDING AWS-D17.1 Approved Spec Added

7/31/2013 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - STRESS RELIEF PS-1001 Approved Spec Added

7/31/2013 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - STRESS RELIEF PS-1002 Approved Spec Added

7/29/2013 0:00 Blair / HSM Machine Works, Inc. (12230) CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

7/25/2013 0:00 METAL IMPROVEMENT CO. - Feuchtwangen (6727) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/23/2013 0:00 Kaman Aerostructures - Chihuahua (10715) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

Page (84) of (128)


Printed: 12/14/2018

7/23/2013 0:00 Kaman Aerostructures - Chihuahua (10715) HT - HEAT TREAT AMS-2770 Approved Spec Added

7/22/2013 0:00 Bytest srl (5379) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/22/2013 0:00 Bytest srl (5379) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/22/2013 0:00 Bytest srl (5379) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) HT - HEAT TREAT AMS-2770 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

7/15/2013 0:00 Fucine Umbre (8092) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/11/2013 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP01 - COATING, DRY FILM MM-1920 Approved Spec Added

7/8/2013 0:00 Southwest United Galnik SA de CV (10581) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

6/13/2013 0:00 Southwest United Galnik SA de CV (10581) SE - SHOT PEEN AMS-2430 Approved Spec Added

6/13/2013 0:00 Southwest United Galnik SA de CV (10581) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

6/12/2013 0:00 Magellan Aerospace Processing - New York (4250) SE - SHOT PEEN CPC-6400 Approved Spec Added

6/12/2013 0:00 Magellan Aerospace Processing - New York (4250) SE - SHOT PEEN BP-105 Approved Spec Added

6/11/2013 0:00 Metal Finishing Co. - Chihuahua (10847) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/11/2013 0:00 Metal Finishing Co. - Chihuahua (10847) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

6/7/2013 0:00 AGC AeroComposites - Hayden (6886) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/5/2013 0:00 GE AVIATION MSSA CP01 - COATING, PAINT APPLICATION BR-167 Inactive Spec Removed

6/5/2013 0:00 GE AVIATION MSSA CP01 - COATING, PAINT APPLICATION MM-5748 Inactive Spec Removed

6/5/2013 0:00 GE AVIATION MSSA CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

5/30/2013 0:00 Advanced Coating Technique (4813) HT - STRESS RELIEF AMS-2759/3 Inactive Spec Removed

5/23/2013 0:00 Bodycote Thermal Processing - Kitchener AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

5/22/2013 0:00 Bodycote Thermal Processing - Kitchener HT - HEAT TREAT AMS-2759 Approved Spec Removed

5/22/2013 0:00 Bodycote Thermal Processing - Kitchener HT - HEAT TREAT AMS-H-6875 Approved Spec Removed

5/21/2013 0:00 Advanced Coating Technique (4813) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/14/2013 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT AMS-5629 Approved Spec Added

5/14/2013 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT AMS-5629 Approved Spec Added

5/7/2013 0:00 Dynamic Technology, Inc. - FTW NA - CALIBRATION ISO 17025 Approved Spec Added

5/6/2013 0:00 Metal Spray Concepts (10719) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/2/2013 0:00 OVS Villella (8001) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/1/2013 0:00 OVS Villella (8001) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/1/2013 0:00 OVS Villella (8001) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/1/2013 0:00 OVS Villella (8001) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

5/1/2013 0:00 OVS Villella (8001) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/30/2013 0:00 ARAL HAVACILIK SANAYİ TİC. LTD. ŞTİ. AQS - QUALITY SYSTEM AC7004 Inactive Spec Modification

4/23/2013 0:00 Arrow Gear CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

4/23/2013 0:00 Arrow Gear CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

4/22/2013 0:00 Embee Processing, LLC. (3337) CP07 - IVD, CADMIUM MM-4949 Inactive Spec Removed

4/22/2013 0:00 Embee Processing, LLC. (3337) NDT - INSPECTION, TEMPER ETCH CP-0350 Inactive Spec Removed

4/12/2013 0:00 Pyrotek (4587) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

4/6/2013 0:00 Alp Aviation (7440) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

4/6/2013 0:00 Alp Aviation (7440) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

4/6/2013 0:00 Alp Aviation (7440) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

4/6/2013 0:00 Alp Aviation (7440) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Approved Spec Added

4/6/2013 0:00 Alp Aviation (7440) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Approved Spec Added

4/3/2013 0:00 Orbit Industries at GLG Marble AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

Page (85) of (128)


Printed: 12/14/2018

4/3/2013 0:00 Orbit Industries at GLG Marble NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

4/3/2013 0:00 Orbit Industries at GLG Marble NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

4/2/2013 0:00 Tektronix Service Solutions NA - CALIBRATION ISO17025 Not Approved Spec Removed

3/28/2013 0:00 Advanced Coating Technique (4813) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/27/2013 0:00 Fukada Netsusyori Kogyo Co., Ltd. (10823) HT - HEAT TREAT AMS-2759/1 Approved Spec Added


3/27/2013 0:00 Southwest United Galnik SA de CV (10581) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

3/27/2013 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT CPC-6216 Superceded Spec Modification

3/27/2013 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT CPC-6203 Superceded Spec Modification

3/27/2013 0:00 Vac-Aero International Inc.-Montreal (3421) HT - HEAT TREAT CPC-6201 Inactive Spec Modification

3/27/2013 0:00 Southwest United Galnik SA de CV (10581) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/18/2013 0:00 Phoenix Spring Company (3975) CP12 - PASSIVATION AMS-2700 Approved Spec Added


3/18/2013 0:00 Phoenix Spring Company (3975) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/18/2013 0:00 Phoenix Spring Company (3975) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/13/2013 0:00 Toko Tekko Co., Ltd (11776) AQS - QUALITY SYSTEM AS 9100 Approved

3/12/2013 0:00 Metal Surfaces Inc. (3501) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/6/2013 0:00 Blue Streak Finishers (4405) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

3/5/2013 0:00 Robert Wooler Co (4249) HT - HEAT TREAT AMS-2759/2 Approved Spec Added

3/5/2013 0:00 Robert Wooler Co (4249) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/5/2013 0:00 Robert Wooler Co (4249) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification








3/4/2013 0:00 Rex Heat Treat (3749) HT - HEAT TREAT AMS-2759 Inactive Spec Modification

2/28/2013 0:00 Weber Metals, Inc. (4218) HT - HEAT TREAT AMS-2772 Approved Spec Added

2/20/2013 0:00 Merrill Fabricators AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Modification

2/20/2013 0:00 HITEMCO (3173) CT - HVOF LGPS-1301 Approved Spec Modification

2/15/2013 0:00 Air Industries Machining Corp NA - ROLLER BURNISHING BR-163 Approved Spec Modification

2/14/2013 0:00 Mecaer Aviation Group S.p.A. (10206) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

2/12/2013 0:00 Stack Metallurgical Services, Inc. (3801) HT - HEAT TREAT LGPS-2002 Approved Spec Added

2/11/2013 0:00 J. D. Ott Company, Inc. (4334) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/4/2013 0:00 Magellan Aerospace Processing - New York (4250) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

1/31/2013 0:00 Advanced Coating Technique (4813) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

1/31/2013 0:00 Advanced Coating Technique (4813) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Modification

1/31/2013 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, PAINT APPLICATION MIL-C-8514 Inactive Spec Removed

1/31/2013 0:00 Magellan Aerospace Processing - New York (4250) CP01 - COATING, DRY FILM MIL-L-23398 Approved Spec Modification

1/31/2013 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION MIL-P-24441 Inactive Spec Removed

1/30/2013 0:00 Aerosphere Inc. (8507) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

1/25/2013 0:00 Alp Aviation (7440) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

1/25/2013 0:00 Diamond Chrome Plating, Inc. (3618) HT - STRESS RELIEF LGPS-2002 Approved Spec Added

1/25/2013 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT AMS-2759/2 Approved Spec Added



Page (86) of (128)


Printed: 12/14/2018

1/25/2013 0:00 General Metal Heat Treat (4457) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/25/2013 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT LGPS-2000 Approved Spec Added

1/25/2013 0:00 Orbit Industries (3243) HT - STRESS RELIEF LGPS-2002 Approved Spec Modification

1/25/2013 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification

1/25/2013 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT BP-118 Inactive Spec Removed




1/22/2013 0:00 UMBRAGROUP S.P.A. (5269) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

1/16/2013 0:00 Plating Perceptions, Inc. (4563) HT - STRESS RELIEF LGPS-2002 Approved Spec Added

1/16/2013 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT BP-106 Approved Spec Added

1/14/2013 0:00 Arconic Forgings and Extrusions (3316) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Approved Spec Added

1/7/2013 0:00 Embee Processing, LLC. (3337) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/21/2012 0:00 Brampton Processing (4648) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/21/2012 0:00 Southwest United Canada Inc.(4197) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

12/19/2012 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT ES-0744 Approved Spec Added

12/19/2012 0:00 Southwest United Galnik SA de CV (10581) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

12/19/2012 0:00 Southwest United Galnik SA de CV (10581) CP12 - PASSIVATION ASTM-A-967 Approved Spec Modification

12/19/2012 0:00 Southwest United Galnik SA de CV (10581) CP12 - PASSIVATION ASTM-A-380 Approved Spec Modification

12/18/2012 0:00 Air Industries Machining Corp CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

12/18/2012 0:00 Air Industries Machining Corp CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

12/18/2012 0:00 Bodycote Thermal Processing - Melrose Park HT - STRESS RELIEF AMS-2759/11 Approved Spec Modification

12/17/2012 0:00 Bluewater Thermal Solutions (8118) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification

12/17/2012 0:00 Advanced Coating Technique (4813) CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

12/17/2012 0:00 Bluewater Thermal Solutions (8118) HT - HEAT TREAT AMS-2759/2 Approved Spec Added

12/17/2012 0:00 Bluewater Thermal Solutions (8118) HT - HEAT TREAT AMS-2759/7 Approved Spec Added

12/17/2012 0:00 Bluewater Thermal Solutions (8118) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

12/17/2012 0:00 V & M PRECISION MACHINE & GRINDING CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

12/17/2012 0:00 V & M PRECISION MACHINE & GRINDING CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

12/17/2012 0:00 V & M PRECISION MACHINE & GRINDING CMSP - GRINDING, CHROME MM-5759 Inactive Spec Removed

12/17/2012 0:00 V & M PRECISION MACHINE & GRINDING AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT BP-124 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-2759/2 Approved Spec Added




12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT MM-4995 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-H-7199 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT PS-2101 Approved Spec Added


12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT MM-4990 Approved Spec Added

12/14/2012 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

12/11/2012 0:00 Superior Plating Company - CT (4160) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

12/7/2012 0:00 Element Materials Technology Rancho Dominguez (3657) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/7/2012 0:00 Cedtech Testing Laboratories (3547) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/6/2012 0:00 Takabayashi Mfg. Co. Ltd. (10827) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

Page (87) of (128)


Printed: 12/14/2018

12/6/2012 0:00 Takabayashi Mfg. Co. Ltd. (10827) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/5/2012 0:00 Phoenix Heat Treating, Inc. (3698) HT - HEAT TREAT AMS-2759/2 Approved Spec Added




12/5/2012 0:00 Phoenix Heat Treating, Inc. (3698) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added


12/4/2012 0:00 Yura Sansho Co., Ltd. (10859) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

12/4/2012 0:00 Yura Sansho Co., Ltd. (10859) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

11/28/2012 0:00 Bowman Plating, Inc (4199) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

11/27/2012 0:00 Yura Sansho Co., Ltd. (10859) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP12 - PASSIVATION AMS-2700 Approved Spec Added

11/27/2012 0:00 Asashita Mekki Co., Ltd. (10370) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

11/27/2012 0:00 Takabayashi Mfg. Co. Ltd. (10827) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

11/27/2012 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Modification

11/26/2012 0:00 Curtiss-Wright Controls Integrated Sensing Inc AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

11/26/2012 0:00 Curtiss-Wright Controls Integrated Sensing Inc WLD - WELDING AMS-W-6858 Inactive Spec Removed

11/19/2012 0:00 Sargent Mexico - Airtomic (6932) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

11/19/2012 0:00 Sargent Mexico - Airtomic (6932) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/19/2012 0:00 Sargent Controls & Aerospace (4716) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

11/19/2012 0:00 Sargent Controls & Aerospace (4716) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed


11/12/2012 0:00 Vac-Aero International -Oakville (3420) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

11/12/2012 0:00 Applus RTD Canada - Burlington (4740) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Pulled Spec Removed

11/12/2012 0:00 AeroTek Manufacturing Limited - CAD (4434) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Inactive Spec Removed

11/6/2012 0:00 ULTRATECH Sp.zo.o (9278) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

11/5/2012 0:00 Air Industries Machining Corp CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

11/2/2012 0:00 Tecnickrome Aeronautique Inc. (4760) CP13 - PLATING, BRUSH ZINC NICKEL LGPS-1107 Approved Spec Added

11/2/2012 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, ZINC NICKEL LGPS-1106 Approved Spec Added

10/22/2012 0:00 CPP - Port Hueneme (3608) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

10/22/2012 0:00 CPP - Port Hueneme (3608) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

10/22/2012 0:00 CPP - Port Hueneme (3608) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

10/19/2012 0:00 Alp Aviation (7440) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

10/15/2012 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

10/15/2012 0:00 Sumitomo Precision Products Co. Ltd. (5058) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

10/12/2012 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

10/12/2012 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Not Approved Spec Removed

10/10/2012 0:00 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) SE - SHOT PEEN PS-1201 Approved Spec Added

10/10/2012 0:00 Magellan Aerospace Processing - New York (4250) SE - SHOT PEEN PS-1201 Approved Spec Added

Page (88) of (128)


Printed: 12/14/2018

10/9/2012 0:00 Mistras Services Inc (3242) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/3/2012 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

10/3/2012 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

10/3/2012 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT AMS-2770 Approved Spec Added

10/3/2012 0:00 Bennett Heat Treat (3071) HT - HEAT TREAT AMS-2770 Approved Spec Added

10/3/2012 0:00 Consolidated Industries, Inc. (3587) HT - HEAT TREAT AMS-2770 Approved Spec Added

10/3/2012 0:00 Wyman-Gordon - MA (3454) HT - HEAT TREAT AMS-2770 Approved Spec Added

10/3/2012 0:00 Wyman-Gordon - MA (3454) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

10/3/2012 0:00 Consolidated Industries, Inc. (3587) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

9/20/2012 0:00 Alp Aviation (7440) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

9/20/2012 0:00 Tecnickrome Aeronautique Inc. (4760) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

9/19/2012 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF See Note 1 Approved Spec Added

9/19/2012 0:00 Bodycote Thermal Processing - Burke St. WLD - BRAZING AMS-2665 Inactive Spec Modification

9/18/2012 0:00 Precision Coil Spring (4041) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

9/17/2012 0:00 Cook Induction Heating (5069) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

9/13/2012 0:00 Tekalia Aeronautik (2010) Inc (7875) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

9/11/2012 0:00 Southwest United Galnik SA de CV (10581) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Removed

9/11/2012 0:00 Southwest United Galnik SA de CV (10581) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Removed

9/4/2012 0:00 ASCO Industries (5321) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

9/4/2012 0:00 MAMESTA B.V. HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

8/29/2012 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP05 - CHEMICAL MILLING CPC-8224 Inactive Spec Removed

8/27/2012 0:00 Plating Perceptions, Inc. (4563) HT - STRESS RELIEF AMS-H-6875 Approved Spec Modification

8/27/2012 0:00 Plating Perceptions, Inc. (4563) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/23/2012 0:00 Triumph Processing – Lynwood (4110) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Not Approved Spec Removed

8/14/2012 0:00 Solar Atmospheres of Western PA (4155) HT - HEAT TREAT AMS-2759/2 Approved Spec Added




8/14/2012 0:00 Solar Atmospheres of Western PA (4155) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/14/2012 0:00 Esterline Hytek Finishes (4508) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

8/10/2012 0:00 Sonic Industries CP12 - PASSIVATION AMS-2700 Not Approved Spec Removed

8/10/2012 0:00 METAL IMPROVEMENT CO. - Bensalem CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

8/10/2012 0:00 METAL IMPROVEMENT CO. - Bensalem CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

8/10/2012 0:00 METAL IMPROVEMENT CO. - Bensalem CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

8/10/2012 0:00 METAL IMPROVEMENT CO. - Bensalem AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

8/10/2012 0:00 METAL IMPROVEMENT CO. - Bensalem SE - SHOT PEEN AMS-2430 Inactive Spec Removed

8/8/2012 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, SILVER AMS-2410 Approved Spec Added

8/7/2012 0:00 Magellan Aerospace Processing - New York (4250) CP09 - PLATING, COPPER AMS-2418 Inactive Spec Removed

8/6/2012 0:00 International Hardcoat Inc. (3259) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Inactive Spec Removed

8/6/2012 0:00 International Hardcoat Inc. (3259) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Modification

8/6/2012 0:00 Vac-Met Inc. (3422) HT - HEAT TREAT AMS-2759/2 Approved Spec Added




8/6/2012 0:00 Vac-Met Inc. (3422) HT - HEAT TREAT AMS-2759/1 Approved Spec Modification

8/1/2012 0:00 Ultraspec Finishing Inc. (4686) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

7/27/2012 0:00 Southwest United Ind. at Daniluk Corp. CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

7/23/2012 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT LGPS-2002 Approved Spec Added

Page (89) of (128)


Printed: 12/14/2018

7/23/2012 0:00 Engineered Heat Treat, Inc. (3341) HT - HEAT TREAT LGPS-2002 Approved Spec Added

7/23/2012 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT LGPS-2002 Approved Spec Added

7/23/2012 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT LGPS-2002 Approved Spec Added

7/23/2012 0:00 Phoenix Heat Treating, Inc. (3698) HT - HEAT TREAT LGPS-2002 Approved Spec Added

7/23/2012 0:00 Phoenix Heat Treating, Inc. (3698) HT - HEAT TREAT CPC-6203 Superceded Spec Removed



7/23/2012 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT CPC-6201 Superceded Spec Removed




7/23/2012 0:00 General Metal Heat Treat (4457) HT - HEAT TREAT CPC-6203 Superceded Spec Removed



7/23/2012 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT CPC-6216 Superceded Spec Removed




7/23/2012 0:00 Engineered Heat Treat, Inc. (3341) HT - HEAT TREAT CPC-6201 Superceded Spec Removed



7/20/2012 0:00 Mecaer America Inc. (12134) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/20/2012 0:00 Vac Developments (5576) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/20/2012 0:00 Applus RTD Canada - Burlington (4740) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/20/2012 0:00 Noranco – Vaughan Division (12266) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/20/2012 0:00 Sierra Spray Painting Ltd. (11458) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP01 - COATING, PAINT APPLICATION MIL-PRF-22750 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP13 - PLATING, BRUSH CADMIUM AMS-QQ-P-416 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP09 - PLATING, CHROME AMS-QQ-C-320 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP09 - PLATING, CHROME AMS-2460 Not Approved Spec Removed

7/18/2012 0:00 UMBRAGROUP S.P.A. (5269) CP09 - PLATING, COPPER AMS-2418 Not Approved Spec Removed

7/16/2012 0:00 Strite Precision Machining Ltd. (12234) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/16/2012 0:00 Taylor Certified Processing, Inc. (5114) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/11/2012 0:00 Brooks Instrument Div. NA - CALIBRATION ISO 10012-1 Inactive Spec Removed

7/9/2012 0:00 Superior Plating Company - CT (4160) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

7/3/2012 0:00 C. P. S. INDUSTRIES INC. AQS - QUALITY SYSTEM AS 9100 Pulled Spec Removed

7/3/2012 0:00 Heroux Devtek Kitchener AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2012 0:00 Anodizing & Paint TNM Inc. (4687) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2012 0:00 Aerosphere Inc. (8507) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2012 0:00 AeroTek Manufacturing Limited - CAD (4434) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/3/2012 0:00 Alphacasting Inc. (5168) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/2/2012 0:00 Cygnus, Inc. (4388) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Modification

7/2/2012 0:00 Cygnus, Inc. (4388) CP12 - PASSIVATION ASTM-A-967 Approved Spec Modification

Page (90) of (128)


Printed: 12/14/2018

6/26/2012 0:00 Alp Aviation (7440) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108 Approved Spec Added

6/19/2012 0:00 Modern Industries, Inc. - Erie (4319) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

6/19/2012 0:00 Modern Industries, Inc. - Erie (4319) HT - HEAT TREAT AMS-2759/1 Approved Spec Added






6/19/2012 0:00 Modern Industries, Inc. - Erie (4319) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

6/15/2012 0:00 Southwest United Industries, Inc. (4185) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

6/12/2012 0:00 Diamond Chrome Plating, Inc. (3618) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108 Approved Spec Added

6/11/2012 0:00 Dayton T. Brown, Inc. NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

6/8/2012 0:00 Stack Metallurgical Services, Inc. (3801) HT - HEAT TREAT AMS-2770 Approved Spec Modification

6/8/2012 0:00 Stack Metallurgical Services, Inc. (3801) HT - HEAT TREAT AMS-H-6875 Approved Spec Modification

6/8/2012 0:00 Stack Metallurgical Services, Inc. (3801) HT - HEAT TREAT AMS-2759 Approved Spec Modification

6/8/2012 0:00 Stack Metallurgical Services, Inc. (3801) HT - HEAT TREAT AMS-H-81200 Approved Spec Modification

6/7/2012 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-2759 Inactive Spec Modification

6/7/2012 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT CPC-6201 Superceded Spec Modification

6/7/2012 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT AMS-2759 Inactive Spec Modification

6/7/2012 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT CPC-6205 Superceded Spec Modification

6/7/2012 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT CPC-6203 Superceded Spec Modification



6/7/2012 0:00 Precision Coil Spring (4041) HT - HEAT TREAT CPC-6201 Superceded Spec Removed


6/7/2012 0:00 Precision Coil Spring (4041) HT - HEAT TREAT AMS-2759/4 Approved Spec Modification


6/7/2012 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - HEAT TREAT LGPS-2002 Approved Spec Added






6/7/2012 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




6/7/2012 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF LGPS-7000 Inactive Spec Added

6/7/2012 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT LGPS-2002 Approved Spec Modification





6/7/2012 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT LGPS-2002 Approved Spec Added

6/7/2012 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT AMS-2759/1 Approved Spec Added




Page (91) of (128)


Printed: 12/14/2018

6/7/2012 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF CPC-6203 Superceded Spec Modification

6/7/2012 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - HEAT TREAT CPC-6201 Superceded Spec Modification


6/7/2012 0:00 Bodycote Thermal Processing - Huntington Park (3307) HT - HEAT TREAT AMS-2759 Inactive Spec Modification


6/7/2012 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT CPC-6216 Superceded Spec Removed

6/7/2012 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT AMS-2759 Inactive Spec Modification



5/31/2012 0:00 NP PRECISION, INC. CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

5/31/2012 0:00 NP PRECISION, INC. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

5/31/2012 0:00 MEARS MACHINE NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/31/2012 0:00 MEARS MACHINE AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

5/31/2012 0:00 MEARS MACHINE WLD - WELDING MIL-W-22248 Inactive Spec Removed

5/30/2012 0:00 Kimball Labs NA - CALIBRATION ISO 17025 Approved Spec Added

5/30/2012 0:00 A1 Calibration Laboratory NA - CALIBRATION ISO 17025 Inactive Spec Removed

5/28/2012 0:00 MB Aerospace Technologies (Poland) Sp. Z o.o. plant No 2 Rzeszow (10907)AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/28/2012 0:00 ATI ZKM Forging sp. z o.o. (8184) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/25/2012 0:00 CPP - Port Hueneme (3608) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/25/2012 0:00 ST&I Inc. - Surface Treatment & Inspection (3800) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/25/2012 0:00 CPP - Port Hueneme (3608) HT - HEAT TREAT AMS-2771 Approved Spec Added

5/23/2012 0:00 Shultz Steel Co. (4392) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/23/2012 0:00 Bodycote Thermal Processing - Vernon (3308) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/23/2012 0:00 GE AVIATION MSSA AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/23/2012 0:00 Triumph Actuation Systems - Yakima (3937) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/22/2012 0:00 Sargent Controls & Aerospace (4716) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/22/2012 0:00 Southwest United Galnik SA de CV (10581) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/22/2012 0:00 Air Industries Machining Corp AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/22/2012 0:00 Magnetic Inspection Laboratory, Inc. - Annex (10392) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/21/2012 0:00 Clackamas Tool Welding (6035) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/21/2012 0:00 PAS Technologies - Kansas City (5202) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

5/21/2012 0:00 PAS Technologies - Kansas City (5202) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

5/21/2012 0:00 PAS Technologies - Kansas City (5202) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Inactive Spec Removed

5/21/2012 0:00 PAS Technologies - Kansas City (5202) CP02 - TEMPER ETCH INSPECTION AMS-2649 Inactive Spec Removed

5/18/2012 0:00 DECCO CASTINGS NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/18/2012 0:00 DECCO CASTINGS NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

5/15/2012 0:00 Nelson-Miller Inc. (5451) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/15/2012 0:00 Quality Heat Treating (4407) HT - HEAT TREAT BP-118 Inactive Spec Removed




5/10/2012 0:00 Aero-Safe Processing Inc. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Pulled Spec Removed

Page (92) of (128)


Printed: 12/14/2018

5/10/2012 0:00 Aero-Safe Processing Inc. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP09 - PLATING, COPPER AMS-2418 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP10 - ELECTROLESS PLATING, NICKEL MIL-C-26074 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP12 - PASSIVATION AMS-2700 Pulled Spec Removed

5/10/2012 0:00 Aero-Safe Processing Inc. CP12 - PASSIVATION ASTM-A-967 Approved Spec Removed


5/9/2012 0:00 Modern Industries (7006) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/9/2012 0:00 Modern Industries, Inc. (3215) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/9/2012 0:00 Modern Industries (7006) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/8/2012 0:00 Anodic Inc. (3038) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Modification

5/7/2012 0:00 Westfield Electroplating (3443) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

5/7/2012 0:00 Westfield Electroplating (3443) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

5/7/2012 0:00 Westfield Electroplating (3443) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

5/1/2012 0:00 TRU-TONE METAL PRODUCT, INC. CP01 - COATING, PAINT APPLICATION MM-5748 Inactive Spec Removed

5/1/2012 0:00 TRU-TONE METAL PRODUCT, INC. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

5/1/2012 0:00 TRU-TONE METAL PRODUCT, INC. CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

5/1/2012 0:00 TRU-TONE METAL PRODUCT, INC. AQS - QUALITY SYSTEM ISO9000 Inactive Spec Removed

4/30/2012 0:00 Superior Plating Company - CT (4160) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108 Approved Spec Added

4/27/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

4/27/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

4/27/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - HEAT TREAT BP-124 Approved Spec Added

4/27/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

4/25/2012 0:00 Vac Aero Kalisz CT - HVOF LGPS-1301 Not Approved Spec Added

4/23/2012 0:00 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Added

4/12/2012 0:00 Modern Industries, Inc. (3215) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

4/12/2012 0:00 Modern Industries, Inc. (3215) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

4/12/2012 0:00 Modern Industries, Inc. (3215) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

4/12/2012 0:00 Modern Industries, Inc. (3215) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

4/12/2012 0:00 Modern Industries, Inc. (3215) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/11/2012 0:00 Southwest United Galnik SA de CV (10581) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

4/10/2012 0:00 Weber Metals, Inc. (4218) HT - HEAT TREAT AMS-2770 Approved Spec Added

4/10/2012 0:00 Weber Metals, Inc. (4218) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

4/10/2012 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

3/30/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

3/28/2012 0:00 Embee Processing, LLC. (3337) CMSP - GRINDING, CHROME MM-4990-5 Approved Spec Added

3/23/2012 0:00 Smiths Tubular Systems - Laconia (3303) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

3/21/2012 0:00 Fisher Scientific Canada NA - CALIBRATION ISO 10012-1 Inactive Spec Added

3/21/2012 0:00 Metrohm NA - CALIBRATION ISO 10012-1 Inactive Spec Added

3/20/2012 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - MANUAL PEENING LGPS-1501 Approved Spec Added

3/20/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

3/20/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

3/20/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) SE - FLAPPER / ROTO PEENING MIL-R-81841 Approved Spec Added

3/20/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) SE - FLAPPER / ROTO PEENING AMS-2590 Approved Spec Added

3/20/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

3/20/2012 0:00 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/20/2012 0:00 voestalpine BÖHLER Aerospace GmbH & Co KG (4043) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

Page (93) of (128)


Printed: 12/14/2018

3/20/2012 0:00 Aubert & Duval (5258) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

3/20/2012 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - FLAPPER / ROTO PEENING MIL-R-81841 Not Approved Spec Removed

3/19/2012 0:00 Westfield Electroplating (3443) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

3/15/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 Approved Spec Added

3/15/2012 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

2/28/2012 0:00 Aubert & Duval (5258) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

2/28/2012 0:00 R. B. Annis Co., Inc. NA - CALIBRATION ISO 10012-1 Pulled Spec Removed

2/27/2012 0:00 W Pat Crow Forgings (4177) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/27/2012 0:00 Tecnickrome Aeronautique Inc. (4760) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

2/20/2012 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/13/2012 0:00 Fokker Landing Gear B.V. (7454) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Modification

2/9/2012 0:00 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) SE - SHOT PEEN MM-5534 Inactive Spec Removed

2/1/2012 0:00 Esterline Hytek Finishes (4508) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Modification

1/27/2012 0:00 Kaji Metal LTD. (5400) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

1/27/2012 0:00 Deloro Stellite Surface Technologies CT - HVOF LGPS-1301 Inactive Spec Removed

1/27/2012 0:00 Deloro Stellite Surface Technologies CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

1/27/2012 0:00 Deloro Stellite Surface Technologies CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

1/27/2012 0:00 Deloro Stellite Surface Technologies AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

1/27/2012 0:00 Deloro Stellite Surface Technologies CP14 - STRIPPING, HVOF LGPS-1300 Inactive Spec Removed

1/27/2012 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

1/27/2012 0:00 Terauchi Manufacturing Co. Ltd. (7864) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

1/27/2012 0:00 Tecnickrome Aeronautique Inc. (4760) CT - HVOF LGPS-1301 Approved Spec Added

1/27/2012 0:00 Tecnickrome Aeronautique Inc. (4760) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

1/24/2012 0:00 HTG Hi Tech Aero (3196) HT - HEAT TREAT AMS-2759/3 Approved Spec Added



1/24/2012 0:00 HTG Hi Tech Aero (3196) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/24/2012 0:00 Exotic Tool Welding Company (5464) WLD - WELDING AWS-D17.1 Approved Spec Modification

1/20/2012 0:00 MB Aerospace Technologies (Poland) Sp. Z o.o. plant No 2 Rzeszow (10907)HT - HEAT TREAT AMS-2759/2 Approved Spec Added

1/20/2012 0:00 MB Aerospace Technologies (Poland) Sp. Z o.o. plant No 2 Rzeszow (10907)HT - HEAT TREAT AMS-2759/3 Approved Spec Added

1/16/2012 0:00 Metallurgical Processing, Inc. (3504) HT - HEAT TREAT AMS-2759/1 Approved Spec Added






1/16/2012 0:00 Metallurgical Processing, Inc. (3504) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

1/4/2012 0:00 Advanced Coating Technique (4813) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

1/4/2012 0:00 Imtech of California, Inc. NA - COATING, VACUUM IMPREGNATED CHROME MIL-STD-276 Approved Spec Modification

12/20/2011 0:00 Alta Precision Inc. CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Added

12/9/2011 0:00 Alp Aviation (7440) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 Approved Spec Added

12/9/2011 0:00 Alp Aviation (7440) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 Approved Spec Added

12/9/2011 0:00 Alp Aviation (7440) CT - HVOF LGPS-1301 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, TIN ASTM-B-545 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, TIN AMS-2408 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

Page (94) of (128)


Printed: 12/14/2018

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Modification

12/8/2011 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, CHROME AMS-2460 Approved Spec Modification

12/8/2011 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP01 - COATING, DRY FILM AS-5528 Approved Spec Added

12/7/2011 0:00 Southwest United Galnik SA de CV (10581) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

12/7/2011 0:00 Southwest United Galnik SA de CV (10581) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

12/7/2011 0:00 Alp Aviation (7440) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

11/29/2011 0:00 ILCO Industries (5334) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

11/14/2011 0:00 American Aircraft Parts Mfg. (3332) HT - STRESS RELIEF AMS-2759/9 Approved Spec Added

11/14/2011 0:00 American Aircraft Parts Mfg. (3332) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

11/14/2011 0:00 American Aircraft Parts Mfg. (3332) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

11/9/2011 0:00 Hexagon Metrology NA - CALIBRATION ISO17025 Approved Spec Modification

11/9/2011 0:00 Allen Aircraft Products, Inc. (4339) CP01 - COATING, DRY FILM AS-5528 Approved Spec Added

11/3/2011 0:00 Anodizing & Paint TNM Inc. (4687) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

11/3/2011 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Approved Spec Added


10/28/2011 0:00 PRAXAIR SURFACE TECH. - Hieligenhaus CP01 - COATING, PAINT APPLICATION MMC-370 Inactive Spec Removed

10/28/2011 0:00 Dan's Certified Welding (5177) WLD - WELDING RI-743 Inactive Spec Removed

10/21/2011 0:00 Interface Welding (5594) WLD - WELDING CPC-5306 Inactive Spec Removed

10/21/2011 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. - Annex (10392) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. - Annex (10392) CP01 - COATING, DRY FILM CP-0420 Approved Spec Added

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. - Annex (10392) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

10/17/2011 0:00 Alp Aviation (7440) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/17/2011 0:00 Fokker Landing Gear B.V. (7454) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/17/2011 0:00 Mecaer Aviation Group S.p.A. (10206) HT - STRESS RELIEF AMS-2759/11 Not Approved Spec Added

10/17/2011 0:00 Southwest United Industries, Inc. (4185) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/17/2011 0:00 PAS Technologies - Phoenix (3378) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP01 - COATING, DRY FILM CP-0420 Inactive Spec Removed

10/17/2011 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP01 - COATING, DRY FILM MIL-PRF-46010 Inactive Spec Removed

10/13/2011 0:00 California Metal Processing (4012) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/13/2011 0:00 RUAG Australia Pty Ltd. (5422) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/12/2011 0:00 Asko Processing, Inc. (3049) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/11/2011 0:00 ATI Forged Products (3297) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

10/11/2011 0:00 Parker Aerospace NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

10/11/2011 0:00 Parker Aerospace NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

10/11/2011 0:00 Parker Aerospace CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

10/9/2011 0:00 Lubeco, Inc. (3479) CP01 - COATING, DRY FILM MM-1920 Approved Spec Added

10/9/2011 0:00 Lubeco, Inc. (3479) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

10/6/2011 0:00 Aerosphere Inc. (8507) SE - MANUAL PEENING AMS-2430 Approved Spec Added

10/5/2011 0:00 ASCO Industries (5321) HT - STRESS RELIEF AMS-2759 Approved Spec Added

10/5/2011 0:00 ASCO Industries (5321) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

10/5/2011 0:00 ASCO Industries (5321) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

10/4/2011 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT BP-124 Approved Spec Added




Page (95) of (128)


Printed: 12/14/2018

10/4/2011 0:00 Diamond Chrome Plating, Inc. (3618) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

10/4/2011 0:00 Diamond Chrome Plating, Inc. (3618) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

10/3/2011 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, NICKEL MIL-P-27418 Inactive Spec Removed

9/28/2011 0:00 BODYCOTE BELGIUM (5610) HT - HEAT TREAT AMS-2759 Approved Spec Added

9/28/2011 0:00 BODYCOTE BELGIUM (5610) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/28/2011 0:00 BODYCOTE BELGIUM (5610) HT - HEAT TREAT AMS-2759/2 Approved Spec Added

9/26/2011 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - STRESS RELIEF PS-1001 Approved Spec Added

9/18/2011 0:00 Tekalia Aeronautik (2010) Inc (7875) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

9/16/2011 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, SILVER ASTM-B-700 Inactive Spec Removed

9/16/2011 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME BP-102 Superceded Spec Removed

9/16/2011 0:00 Har-Conn Chrome Co (3159) CP09 - PLATING, CHROME LGPS-1101 Not Approved Spec Removed

9/16/2011 0:00 Har-Conn Chrome Co (3159) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

9/2/2011 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT AMS-2759/7 Approved Spec Added

9/2/2011 0:00 Conrad Kacsik NA - CALIBRATION ISO 17025 Approved Spec Added

9/2/2011 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

9/2/2011 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Removed

9/2/2011 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

9/2/2011 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, CHROME AMS-2406 Inactive Spec Removed

8/24/2011 0:00 Quality Steel Treating LLC (4005) WLD - WELDING RI-141 Inactive Spec Removed

8/16/2011 0:00 Kamatics Corp. (4548) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) CP12 - PASSIVATION AMS-2700 Approved Spec Added

8/16/2011 0:00 Kamatics Corp. (4548) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

8/15/2011 0:00 PAS Technologies - Phoenix (3378) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

8/3/2011 0:00 METALS TESTING CO., INC. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

8/3/2011 0:00 METALS TESTING CO., INC. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

8/3/2011 0:00 METALS TESTING CO., INC. CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

8/3/2011 0:00 METALS TESTING CO., INC. AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

8/3/2011 0:00 Bodycote Thermal Processing - Berlin CT (3081) HT - HEAT TREAT AMS-2759 Inactive Spec Removed

8/3/2011 0:00 Bodycote Thermal Processing - Berlin CT (3081) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

7/29/2011 0:00 Measurement Specialties, Inc. NA - CALIBRATION ISO17025 Inactive Spec Removed

7/27/2011 0:00 Superior Plating Company - CT (4160) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

7/27/2011 0:00 PPI Aerospace LLC (Main) (3840) CP09 - PLATING, NICKEL AMS-QQ-N-290 Approved Spec Added

7/26/2011 0:00 Coast Plating Inc (4572) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

7/22/2011 0:00 Atek Corporation NA - CALIBRATION ISO17025 Inactive Spec Removed

7/21/2011 0:00 Southwest United Industries, Inc. (4185) CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2515 Inactive Spec Removed

7/21/2011 0:00 Southwest United Industries, Inc. (4185) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625 type 1B Approved Spec Added

7/6/2011 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT BP-124 Approved Spec Added

7/6/2011 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT PS-2101 Approved Spec Added






Page (96) of (128)


Printed: 12/14/2018

7/6/2011 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT AMS-2759 Approved Spec Added

7/1/2011 0:00 Cygnus, Inc. (4388) CP12 - PASSIVATION AMS-2700 Approved Spec Added

6/29/2011 0:00 Vac Developments (5576) WLD - WELDING AWS-D17.1 Approved Spec Modification

6/24/2011 0:00 Sargent Controls & Aerospace (4716) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

6/24/2011 0:00 Sargent Controls & Aerospace (4716) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/24/2011 0:00 Magellan Aerospace Processing - New York (4250) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

6/6/2011 0:00 Exactatherm Ltd. (4642) NA - LABORATORY / TESTING A2LA Inactive Spec Removed

5/31/2011 0:00 P M Testing Laboratory Inc (4535) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Not Approved Spec Removed

5/18/2011 0:00 ASCO Industries (5321) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

5/18/2011 0:00 MATERIAL METINGEN TESTGROEP B.V. (MME B.V.) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/18/2011 0:00 MATERIAL METINGEN TESTGROEP B.V. (MME B.V.) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Inactive Spec Removed

5/18/2011 0:00 MATERIAL METINGEN TESTGROEP B.V. (MME B.V.) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

5/9/2011 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF BP-106 Inactive Spec Added

5/3/2011 0:00 PAS Technologies - Phoenix (3378) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

5/3/2011 0:00 PAS Technologies - Phoenix (3378) CP12 - PASSIVATION AMS-2700 Approved Spec Added

4/29/2011 0:00 Final Finish Corp CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

4/29/2011 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

4/21/2011 0:00 Multi-Flex Plating Co. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

4/21/2011 0:00 Multi-Flex Plating Co. CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

4/21/2011 0:00 Multi-Flex Plating Co. AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

4/21/2011 0:00 Multi-Flex Plating Co. CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

4/19/2011 0:00 Merrill Fabricators CP01 - COATING, PAINT APPLICATION LGPS-1001 Not Approved Spec Added

3/30/2011 0:00 ARAL HAVACILIK SANAYİ TİC. LTD. ŞTİ. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Pulled Spec Removed

3/30/2011 0:00 ARAL HAVACILIK SANAYİ TİC. LTD. ŞTİ. CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Pulled Spec Removed

3/21/2011 0:00 WSK PZL-Rzeszow S.A. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

3/21/2011 0:00 WSK PZL-Rzeszow S.A. HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

3/21/2011 0:00 WSK PZL-Rzeszow S.A. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) RI-140 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

3/7/2011 0:00 Semiray Special Process Division (3277) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

3/3/2011 0:00 TRIUMPH ACTUATION SYS VALENCIA CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

3/3/2011 0:00 TRIUMPH ACTUATION SYS VALENCIA CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

3/3/2011 0:00 TRIUMPH ACTUATION SYS VALENCIA AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP09 - PLATING, CHROME AMS-QQ-C-320 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP09 - PLATING, CHROME AMS-2406 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Pulled Spec Removed

2/28/2011 0:00 Magellan Aerospace (Polska) (8232) CP12 - PASSIVATION AMS-2700 Pulled Spec Removed

Page (97) of (128)


Printed: 12/14/2018

2/21/2011 0:00 Dan's Certified Welding (5177) WLD - WELDING AWS-D17.1 Approved Spec Added

2/21/2011 0:00 Dan's Certified Welding (5177) WLD - WELDING RI-141 Approved Spec Added

2/18/2011 0:00 Magellan Aerospace Processing - New York (4250) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

2/17/2011 0:00 Magellan Aerospace Processing - New York (4250) HT - STRESS RELIEF AMS-2759/3 Approved Spec Modification



2/16/2011 0:00 GTTOnSET AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

2/16/2011 0:00 GTTOnSET NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

2/16/2011 0:00 GTTOnSET NDT - INSPECTION, LIQUID PENETRANT MIL-STD-6866 Not Approved Spec Removed

2/16/2011 0:00 GTTOnSET NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

2/15/2011 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, COPPER MMC-254 Approved Spec Modification

2/15/2011 0:00 Aerospace Metal Finishing (4994) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

2/15/2011 0:00 Westfield Electroplating (3443) CP09 - PLATING, COPPER MMC-194 Inactive Spec Removed



2/4/2011 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CHROME ES-0602 Inactive Spec Removed

2/4/2011 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CHROME CPC-8221 Inactive Spec Removed

2/1/2011 0:00 Fokker Landing Gear B.V. (7454) SE - SHOT PEEN MMC-137 Approved Spec Added

1/31/2011 0:00 Wyman-Gordon - MA (3454) NDT - INSPECTION, ULTRASONIC MM-4972 Inactive Spec Removed

1/31/2011 0:00 Wyman-Gordon - MA (3454) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

1/31/2011 0:00 Wyman-Gordon - MA (3454) NDT - INSPECTION, ULTRASONIC CPC-9104 Inactive Spec Removed

1/31/2011 0:00 Poly Metal Finishing, Inc. (3705) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

1/31/2011 0:00 Poly Metal Finishing, Inc. (3705) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

1/20/2011 0:00 Hitemco (at CP Tech) CT - HVOF LGPS-1301 Inactive Spec Removed

1/20/2011 0:00 Hitemco (at CP Tech) CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

1/20/2011 0:00 Manufacturing Technology, Inc. (old site) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/20/2011 0:00 NATIONAL SPECTROGRAPHIC LAB NA - LABORATORY / TESTING A2LA Inactive Spec Removed

1/20/2011 0:00 NATIONAL SPECTROGRAPHIC LAB AQS - QUALITY SYSTEM AQS Inactive Spec Removed

1/18/2011 0:00 Embee Processing, LLC. (3337) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

1/18/2011 0:00 Embee Processing, LLC. (3337) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

1/18/2011 0:00 Embee Processing, LLC. (3337) CT - HVOF LGPS-1301 Approved Spec Added

1/13/2011 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF PS-1001 Inactive Spec Added

12/17/2010 0:00 Alp Aviation (7440) CMSP - GRINDING, HVOF LGPS-7010 Approved Spec Added

12/17/2010 0:00 Alp Aviation (7440) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

12/17/2010 0:00 Alp Aviation (7440) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

12/17/2010 0:00 Alp Aviation (7440) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

12/17/2010 0:00 Strite Precision Machining Ltd. (12234) HT - HEAT TREAT AMS-2759/11 Approved Spec Added

12/2/2010 0:00 NU-PRO SURFACE TREATMENTS CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

12/2/2010 0:00 NU-PRO SURFACE TREATMENTS CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Inactive Spec Removed

12/2/2010 0:00 NU-PRO SURFACE TREATMENTS AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed


11/22/2010 0:00 Magellan Aerospace Processing - New York (4250) HT - STRESS RELIEF CPC-6203 Inactive Spec Removed

11/22/2010 0:00 Magellan Aerospace Processing - New York (4250) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

11/22/2010 0:00 Magellan Aerospace Processing - New York (4250) NDT - INSPECTION, ULTRASONIC CPC-9104 Inactive Spec Removed

11/22/2010 0:00 Magellan Aerospace Processing - New York (4250) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

11/15/2010 0:00 Applus RTD Canada - Burlington (4740) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

11/11/2010 0:00 Burton Industries Inc. (4233) HT - STRESS RELIEF PS-1002 Approved Spec Added

11/11/2010 0:00 Burton Industries Inc. (4233) HT - STRESS RELIEF PS-1001 Approved Spec Added

Page (98) of (128)


Printed: 12/14/2018

11/11/2010 0:00 VTN WITTEN (5170) HT - HEAT TREAT AMS-2759/2 Approved Spec Added

11/11/2010 0:00 VTN WITTEN (5170) HT - HEAT TREAT AMS-2759/1 Approved Spec Added

11/11/2010 0:00 VTN WITTEN (5170) HT - HEAT TREAT LGPS-2001 Approved Spec Added

11/8/2010 0:00 DutchAero B.V. AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

10/5/2010 0:00 DANLY IEM NA - ROUGH MACHINING TBD Inactive Spec Removed

9/30/2010 0:00 PCC Structurals – San Leandro (3456) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

9/28/2010 0:00 Tecnickrome Aeronautique Inc. (4760) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

9/28/2010 0:00 Tecnickrome Aeronautique Inc. (4760) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

9/28/2010 0:00 Tecnickrome Aeronautique Inc. (4760) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

9/28/2010 0:00 Dip Braze, Inc. (3620) WLD - BRAZING AMS-2673 Approved Spec Added

9/28/2010 0:00 Dip Braze, Inc. (3620) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

9/22/2010 0:00 Aaxon Labs, Inc. (4574) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

9/21/2010 0:00 DESIGN. MET. CONN. (DMC) HT - HEAT TREAT AMS-6088 Not Approved Spec Removed

9/21/2010 0:00 DESIGN. MET. CONN. (DMC) HT - HEAT TREAT AMS-H-6875 Not Approved Spec Removed

9/21/2010 0:00 DESIGN. MET. CONN. (DMC) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

9/21/2010 0:00 GOODRICH - ALS CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

9/21/2010 0:00 GOODRICH - ALS AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

9/10/2010 0:00 National Process Industries (5091) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/10/2010 0:00 National Process Industries (5091) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

9/9/2010 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP12 - PASSIVATION ES-091 Superceded Spec Removed

9/9/2010 0:00 Cal-Matrix Metrology Inc. NA - CALIBRATION ISO 17025 Approved Spec Added

9/9/2010 0:00 Diamond Chrome Plating, Inc. (3618) CP12 - PASSIVATION ES-091 Superceded Spec Removed

9/9/2010 0:00 Applus RTD Canada - Burlington (4740) NA - CALIBRATION ISO17025 Inactive Spec Removed

9/9/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Approved Spec Added

9/2/2010 0:00 HTG Thermal Treatment Center HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

9/2/2010 0:00 HTG Thermal Treatment Center HT - HEAT TREAT AMS-2759/3 Inactive Spec Removed

9/2/2010 0:00 HTG Thermal Treatment Center HT - HEAT TREAT BP-123 Inactive Spec Removed

9/2/2010 0:00 HTG Thermal Treatment Center AQS - QUALITY SYSTEM AC7004 Inactive Spec Removed



8/27/2010 0:00 CANYON WELDING WLD - WELDING AWS-D17.1 Not Approved Spec Removed

8/27/2010 0:00 CANYON WELDING WLD - WELDING AMS-STD-2219 Not Approved Spec Removed

8/24/2010 0:00 Quality Heat Treating (4407) HT - HEAT TREAT AMS-H-6088 Not Approved Spec Removed





8/11/2010 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/6/2010 0:00 RONTGEN TECHNISCHE DIENST NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

8/6/2010 0:00 RONTGEN TECHNISCHE DIENST AQS - QUALITY SYSTEM AQS Inactive Spec Removed

8/3/2010 0:00 Cleveland Specialty Inspection Service, Inc. NA - CALIBRATION ISO 10012 Approved Spec Modification

8/2/2010 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM-TITANIUM CPC-8225 Superceded Spec Removed

8/2/2010 0:00 Mecaer Aviation Group S.p.A. (10206) CP12 - PASSIVATION AMS-2700 Not Approved Spec Removed

7/29/2010 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP01 - COATING, DRY FILM MM-1920 Inactive Spec Modification

7/29/2010 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP01 - COATING, DRY FILM MIL-PRF-46010 Inactive Spec Modification

7/26/2010 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, SILVER ASTM-B-700 Approved Spec Modification

7/26/2010 0:00 ChangwonSPECIALITY STEEL HT - HEAT TREAT Inactive Spec Removed

7/26/2010 0:00 ChangwonSPECIALITY STEEL AQS - QUALITY SYSTEM Inactive Spec Removed

Page (99) of (128)


Printed: 12/14/2018

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP09 - PLATING, SILVER ASTM-B-700 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP12 - PASSIVATION MIL-S-5002 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP09 - PLATING, COPPER AMS-2418 Inactive Spec Removed

7/20/2010 0:00 Metal Surfaces Inc. (3501) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Inactive Spec Removed

7/20/2010 0:00 Esterline Hytek Finishes (4508) HT - STRESS RELIEF AMS-2759/11 Approved Spec Modification

7/20/2010 0:00 PAS Technologies - Phoenix (3378) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2481 Approved Spec Added

7/20/2010 0:00 PAS Technologies - Phoenix (3378) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

7/19/2010 0:00 Southwest United Industries, Inc. (4185) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL-16232 Approved Spec Added

7/15/2010 0:00 H&N Finishers Inc. HT - HEAT TREAT AMS-2759 Not Approved Spec Removed

7/15/2010 0:00 H&N Finishers Inc. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

7/15/2010 0:00 H&N Finishers Inc. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

7/6/2010 0:00 Southwest United Industries, Inc. (4185) CP11 - CONVERSION COATING, ALUMINUM PS-1034 Approved Spec Added

6/29/2010 0:00 MID-AMERICAN PRECISION PRODUCTS CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Not Approved Spec Removed

6/29/2010 0:00 MID-AMERICAN PRECISION PRODUCTS NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

6/29/2010 0:00 3P Processing, Inc. (3310) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

6/25/2010 0:00 E/M Coating Services (3640) AQS - QUALITY SYSTEM AS 9100 Approved Spec Removed

6/23/2010 0:00 ST&I Inc. - Surface Treatment & Inspection (3800) CP05 - CHEMICAL MILLING MM-5527 Approved Spec Added

6/21/2010 0:00 RBC Transport Dynamics (4312) HT - HEAT TREAT CPC-6216 Inactive Spec Removed


6/21/2010 0:00 RBC Transport Dynamics (4312) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed


6/14/2010 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, TIN MIL-T-10727 Superceded Spec Removed

6/14/2010 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, TIN ASTM-B-545 Approved Spec Added

6/14/2010 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, TIN MIL-T-10727 Superceded Spec Removed

6/14/2010 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, TIN BP-104 Superceded Spec Removed

6/14/2010 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, TIN MIL-T-10727 Superceded Spec Removed

6/7/2010 0:00 American Aircraft Parts Mfg. (3332) HT - STRESS RELIEF CPC-6203 Approved Spec Added

6/2/2010 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION MIL-C-22750 Inactive Spec Removed

6/2/2010 0:00 Golden State Magnetic & Penetrant Lab, Inc. (4729) CP01 - COATING, PAINT APPLICATION MIL-PRF-22750 Inactive Spec Removed

6/2/2010 0:00 Metcor Inc. (4781) HT - HEAT TREAT AMS-2753 Approved Spec Added

6/2/2010 0:00 PACIFIC PISTON RING CO., INC. HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

6/2/2010 0:00 PACIFIC PISTON RING CO., INC. AQS - QUALITY SYSTEM AQS Inactive Spec Removed

5/20/2010 0:00 Asko Processing, Inc. (3049) CP01 - COATING, DRY FILM MIL-PRF-46010 Inactive Spec Removed

5/19/2010 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP09 - PLATING, CHROME LGPS-1101 Approved Spec Added

5/19/2010 0:00 METAL IMPROVEMENT CO. -CHESTER SE - SHOT PEEN AMS-2430 Inactive Spec Removed

5/19/2010 0:00 METAL IMPROVEMENT CO. -CHESTER AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

5/19/2010 0:00 METAL IMPROVEMENT CO. - Newbury (4526) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

5/19/2010 0:00 Bodycote Heat Treatment LTD. - UK HT - HEAT TREAT AMS-2759/1 Inactive Spec Removed

5/19/2010 0:00 Bodycote Heat Treatment LTD. - UK HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

5/18/2010 0:00 XRI Testing - Cleveland (3467) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

5/17/2010 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, COPPER AMS-2418 Not Approved Spec Removed

5/17/2010 0:00 Diamond Chrome Plating, Inc. (3618) CP07 - IVD, CADMIUM AMS-C-8837 Approved Spec Modification

5/17/2010 0:00 Diamond Chrome Plating, Inc. (3618) CP07 - IVD, CADMIUM CPC-8210 Approved Spec Modification

5/14/2010 0:00 Cook Induction Heating (5069) WLD - BRAZING AWS-C3.6 Not Approved Spec Removed

5/14/2010 0:00 Cook Induction Heating (5069) WLD - BRAZING AWS-C-3.7 Not Approved Spec Removed

Page (100) of (128)


Printed: 12/14/2018

5/12/2010 0:00 Embee Processing, LLC. (3337) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

5/11/2010 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CHROME ES-0602 Pulled Spec Removed

5/11/2010 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CHROME CPC-8221 Not Approved Spec Removed

5/11/2010 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CHROME MM-4953 Not Approved Spec Removed

5/10/2010 0:00 Modern Industries (7006) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

5/10/2010 0:00 Modern Industries (7006) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/10/2010 0:00 Modern Industries, Inc. (3215) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

5/10/2010 0:00 Modern Industries, Inc. (3215) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added


5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, NICKEL MIL-STD-868 Approved Spec Added

5/7/2010 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Added

5/7/2010 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

5/7/2010 0:00 Acroturn Industries, Inc. CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

5/7/2010 0:00 Acroturn Industries, Inc. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/7/2010 0:00 MIDDLESEX GROUP LTD NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

5/7/2010 0:00 GRAMBY PLATING INC CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Not Approved Spec Removed

5/7/2010 0:00 GRAMBY PLATING INC CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Not Approved Spec Removed

5/7/2010 0:00 GRAMBY PLATING INC CP12 - PASSIVATION AMS-2700 Not Approved Spec Removed

5/7/2010 0:00 GRAMBY PLATING INC CP12 - PASSIVATION ASTM-A-967 Not Approved Spec Removed

5/3/2010 0:00 METAL IMPROVEMENT CO. - Vernon SE - SHOT PEEN AMS-S-13165 Inactive Spec Removed

5/3/2010 0:00 METAL IMPROVEMENT CO. - Vernon SE - SHOT PEEN CPC-6400 Inactive Spec Removed

5/3/2010 0:00 METAL IMPROVEMENT CO. - Vernon SE - SHOT PEEN AMS-2430 Inactive Spec Removed

4/28/2010 0:00 HARK LABS NA - LABORATORY / TESTING A2LA Pulled Spec Removed

4/26/2010 0:00 Magnetic Inspection Laboratory, Inc. (3487) HT - STRESS RELIEF AMS-2759/9 Approved Spec Added

4/26/2010 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

4/26/2010 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

4/26/2010 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Added

4/26/2010 0:00 Diamond Chrome Plating, Inc. (3618) HT - STRESS RELIEF AMS-2759/9 Approved Spec Added

4/24/2010 0:00 NDE, Inc. (3224) NDT - INSPECTION, ULTRASONIC CPC-9104 Approved Spec Added

4/24/2010 0:00 General Dynamics Ordnance & Tactical Systems (4129) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

4/24/2010 0:00 General Dynamics Ordnance & Tactical Systems (4129) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

4/8/2010 0:00 Dan's Certified Welding (5177) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

4/1/2010 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CADMIUM-TITANIUM F-T402 Inactive Spec Removed

4/1/2010 0:00 Vac-Met Inc. (3422) WLD - BRAZING AMS-2670 Inactive Spec Removed

3/30/2010 0:00 UMBRAGROUP S.P.A. (5269) CP01 - COATING, PAINT APPLICATION MIL-PRF-85582 Inactive Spec Removed

3/30/2010 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION MIL-PRF-85582 Inactive Spec Removed

3/30/2010 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION MIL-C-46168 Inactive Spec Removed

3/30/2010 0:00 Alp Aviation (7440) CP01 - COATING, PAINT APPLICATION MIL-PRF-85582 Inactive Spec Removed

3/30/2010 0:00 Golden State Magnetic & Penetrant Lab, Inc. (4729) CP01 - COATING, PAINT APPLICATION MIL-C-46168 Inactive Spec Removed


3/29/2010 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, DRY FILM CP-0420 Inactive Spec Removed

3/29/2010 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, DRY FILM MMC-155 Inactive Spec Removed

3/26/2010 0:00 SOUTHWEST GRINDING CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

3/26/2010 0:00 SOUTHWEST GRINDING AQS - QUALITY SYSTEM AQS Inactive Spec Removed

Page (101) of (128)


Printed: 12/14/2018

3/26/2010 0:00 Multichrome/Microplate Certified Processing Lab, Inc. CP09 - PLATING, CHROME AMS-2460 Inactive Spec Modification

3/26/2010 0:00 Multichrome/Microplate Certified Processing Lab, Inc. CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Modification

3/26/2010 0:00 Multichrome/Microplate Certified Processing Lab, Inc. AQS - QUALITY SYSTEM AC7004 Inactive Spec Modification

3/19/2010 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM (BRIGHT/LHE) BP-101 Superceded Spec Removed

3/19/2010 0:00 RATIER FIGEAC HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

3/19/2010 0:00 RATIER FIGEAC NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

3/19/2010 0:00 PZL MIELEC SP. Z O O HT - HEAT TREAT AMS-2770 Inactive Spec Removed

3/19/2010 0:00 PZL MIELEC SP. Z O O HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

3/19/2010 0:00 RATIER FIGEAC CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

3/19/2010 0:00 RATIER FIGEAC CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

3/19/2010 0:00 RATIER FIGEAC CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

3/19/2010 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/19/2010 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

3/15/2010 0:00 Phoenix Heat Treating, Inc. (3698) HT - HEAT TREAT AMS-2770 Approved Spec Modification

3/8/2010 0:00 Solar Atmospheres of Western PA (4155) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

3/8/2010 0:00 Solar Atmospheres of Western PA (4155) HT - HEAT TREAT AMS-H-81200 Approved Spec Added


3/8/2010 0:00 Solar Atmospheres of Western PA (4155) HT - HEAT TREAT AMS-2801 Approved Spec Added

3/8/2010 0:00 International Hardcoat Inc. (3259) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469 Approved Spec Added

3/8/2010 0:00 International Hardcoat Inc. (3259) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

3/8/2010 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT AMS-H-81200 Inactive Spec Removed

3/8/2010 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

3/8/2010 0:00 Arconic Forgings and Extrusions (3316) HT - HEAT TREAT AMS-2772 Approved Spec Added

3/3/2010 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

3/3/2010 0:00 PPI Aerospace LLC (Main) (3840) CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

3/1/2010 0:00 Newton Heat Treating Co. (4179) HT - HEAT TREAT AMS-2772 Approved Spec Added

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP05 - CHEMICAL MILLING LGPS-8003 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno HT - HEAT TREAT MMC-282 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno HT - HEAT TREAT AMS-2759 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Removed

Page (102) of (128)


Printed: 12/14/2018

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CHROME MIL-STD-1501 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno SE - SHOT PEEN MMC-137 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno SE - SHOT PEEN AMS-2430 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Krosno CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP02 - TEMPER ETCH INSPECTION MMC-190 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CADMIUM (BRIGHT/LHE) MMC-250 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CADMIUM-TITANIUM MMC-195 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CHROME AMS-2460 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, CHROME MMC-273 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, COPPER MMC-254 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP09 - PLATING, COPPER AMS-2418 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville SE - SHOT PEEN AMS-2430 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

2/24/2010 0:00 GOODRICH LANDING GEAR - Oakville CP12 - TITANIUM CLEANING AMS-2700 Inactive Spec Removed

2/24/2010 0:00 Bodycote Thermal Processing - Tulsa (4341) HT - HEAT TREAT AMS-2759 Pulled Spec Removed

2/24/2010 0:00 Bodycote Thermal Processing - Tulsa (4341) HT - HEAT TREAT AMS-H-6875 Pulled Spec Removed

2/24/2010 0:00 Bodycote Thermal Processing - Tulsa (4341) HT - HEAT TREAT MIL-H-6088 Pulled Spec Removed

2/24/2010 0:00 Bodycote Thermal Processing - Tulsa (4341) AQS - QUALITY SYSTEM AS 9100 Pulled Spec Removed

2/10/2010 0:00 N.D.T. Products Limited NA - CALIBRATION ISO17025 Inactive Spec Removed

2/8/2010 0:00 W Pat Crow Forgings (4177) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

2/8/2010 0:00 W Pat Crow Forgings (4177) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/3/2010 0:00 E/M Coating Services (3640) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

2/3/2010 0:00 E/M Coating Services (3640) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Not Approved Spec Removed

2/1/2010 0:00 Spectronics Corporation NA - CALIBRATION ISO17025 Approved Spec Added

1/25/2010 0:00 Element Cleveland (4344) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

1/25/2010 0:00 Element Cleveland (4344) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

1/21/2010 0:00 Size Control Plating Co. (3952) CP09 - PLATING, CHROME MIL-STD-1501 Inactive Spec Removed

1/21/2010 0:00 Size Control Plating Co. (3952) AQS - QUALITY SYSTEM AQS Inactive Spec Removed

1/21/2010 0:00 Ducommun AeroStructures El Mirage (3110) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

1/21/2010 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471 Approved Spec Added

1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT GSS-5100 Inactive Spec Modification

1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT CP-0360 Inactive Spec Modification

1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT ES-0744 Inactive Spec Modification

1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT AMS-H-6088 Inactive Spec Modification

Page (103) of (128)


Printed: 12/14/2018

1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT CPC-6201 Inactive Spec Modification


1/21/2010 0:00 Bodycote Thermal Processing - (FTW) Haltom City (3519) HT - HEAT TREAT CP-0710 Inactive Spec Modification


1/15/2010 0:00 Imtech of California, Inc. AQS - QUALITY SYSTEM AQS Not Approved Spec Added

1/6/2010 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-DTL-5541 Approved Spec Added

1/6/2010 0:00 Southwest United Canada Inc.(4197) HT - STRESS RELIEF AMS-2759 Approved Spec Added


12/18/2009 0:00 Fokker Landing Gear B.V. (7454) CP01 - COATING, PAINT APPLICATION MM-5748 Approved Spec Added

12/18/2009 0:00 Alp Aviation (7440) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

12/18/2009 0:00 Alp Aviation (7440) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

12/18/2009 0:00 Alp Aviation (7440) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Added

12/18/2009 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

12/15/2009 0:00 American Aircraft Parts Mfg. (3332) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

12/15/2009 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Inactive Spec Modification

12/14/2009 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-2801 Approved Spec Added

12/14/2009 0:00 Test Systems International, Inc. NA - CALIBRATION ISO 10012-1 Approved Spec Added

12/14/2009 0:00 Agilent Technologies Test & Measurements NA - CALIBRATION ISO17025 Inactive Spec Removed

12/9/2009 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

12/3/2009 0:00 Vac-Aero International Inc.-Montreal (3421) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/3/2009 0:00 Asko Processing, Inc. (3049) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

12/3/2009 0:00 Diamond Chrome Plating, Inc. (3618) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

12/3/2009 0:00 Brampton Processing (4648) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/3/2009 0:00 KHI GmbH & Co.KG Kunstharz Imprägnierung AQS - QUALITY SYSTEM ISO9001 Approved Spec Modification

12/2/2009 0:00 Alro Machine Co., Inc. CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

12/2/2009 0:00 Alro Machine Co., Inc. AQS - QUALITY SYSTEM ISO9000 Inactive Spec Removed

11/30/2009 0:00 Alp Aviation (7440) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

11/30/2009 0:00 Alp Aviation (7440) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

11/30/2009 0:00 Size Control Plating Co. (3952) CP09 - PLATING, CHROME LGPS-1001 Not Approved Spec Removed

11/18/2009 0:00 Applied Scale Technology NA - CALIBRATION ISO17025 Approved Spec Modification

11/16/2009 0:00 St Louis Metallizing CT - HVOF LGPS-1301 Approved Spec Added

11/11/2009 0:00 Deloro Stellite Surface Technologies CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

11/7/2009 0:00 Alp Aviation (7440) HT - HEAT TREAT LGPS-2000 Approved Spec Added

11/7/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

11/4/2009 0:00 Exova - Burlington NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

11/4/2009 0:00 Exova - Pointe Claire NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

10/29/2009 0:00 DESIGN. MET. CONN. (DMC) HT - HEAT TREAT AMS-6512 Not Approved Spec Removed

10/29/2009 0:00 DESIGN. MET. CONN. (DMC) HT - HEAT TREAT AMS-H-81200 Not Approved Spec Removed

10/28/2009 0:00 Alp Aviation (7440) HT - HEAT TREAT AMS-2759/1 Approved Spec Added


10/28/2009 0:00 Alp Aviation (7440) HT - HEAT TREAT AMS-2759 Approved Spec Added

10/28/2009 0:00 Applus RTD Canada - Schomberg (5190) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

10/28/2009 0:00 Applus RTD Canada - Schomberg (5190) NDT - INSPECTION, ULTRASONIC MIL-STD-2154 Inactive Spec Removed

10/27/2009 0:00 SONIC INDUSTRIES (Old C&H) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

10/27/2009 0:00 SONIC INDUSTRIES (Old C&H) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

10/26/2009 0:00 Taylor Certified Processing, Inc. (5114) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

10/22/2009 0:00 Sifco Forge Group (3777) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/22/2009 0:00 Superior Plating Company - CT (4160) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

Page (104) of (128)


Printed: 12/14/2018

10/22/2009 0:00 Solar Atmospheres of Western PA (4155) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/22/2009 0:00 Smiths Tubular Systems - Laconia (3303) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/22/2009 0:00 S&L Aerospace Metals LLC (3756) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/22/2009 0:00 Plating Perceptions, Inc. (4563) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/22/2009 0:00 Poly Metal Finishing, Inc. (3705) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/22/2009 0:00 PRECIOUS METAL PLATING CO. AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/22/2009 0:00 Wolkerstorfer Co., Inc. (4026) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/22/2009 0:00 Westfield Electroplating (3443) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/22/2009 0:00 Rex Heat Treat (3749) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

10/22/2009 0:00 PAS Technologies - Kansas City (5202) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Orbit Industries (3243) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/21/2009 0:00 NDE, Inc. (3224) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/21/2009 0:00 New Hampshire Ball Bearings Inc (3229) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 MID-AMERICAN PRECISION PRODUCTS AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Klinge Enameling Company (3287) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Kropp Forge (4373) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Magnetic Inspection Laboratory, Inc. (3487) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 METAL IMPROVEMENT CO. - Blue Ash (4724) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Metal Improvement Co. - Phoenix (4834) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

10/21/2009 0:00 Imagineering Finishing Technologies (3203) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Hohman Plating & Mfg., Inc. (3175) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Blair / HSM Machine Works, Inc. (12230) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 HITEMCO (3173) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/21/2009 0:00 GODFREY & WING, INC. AQS - QUALITY SYSTEM TS16949 Approved Spec Added

10/21/2009 0:00 Bluewater Thermal Solutions (8118) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 HDI Landing gear - Cleveland (12098) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 HDI Landing Gear - Springfield AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 CANTON DROP FORGE (4423) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Bodycote Thermal Processing - Melrose Park AQS - QUALITY SYSTEM ISO9000 Approved Spec Added

10/21/2009 0:00 Magellan Aerospace, New York, Inc. AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Hydro Honing D/B/A Peening Tech. of CT (4068) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/21/2009 0:00 Consolidated Industries, Inc. (3587) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/21/2009 0:00 Nassau Chrome Plating (4972) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

10/14/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

10/12/2009 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT MIL-H-6088 Superceded Spec Removed

10/2/2009 0:00 Met-L-Test Laboratory, Inc. (3497) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/2/2009 0:00 Newton Heat Treating Co. (4179) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/2/2009 0:00 Metal improvement Co. - Romulus (5013) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/2/2009 0:00 PPI Aerospace LLC (Main) (3840) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

10/2/2009 0:00 Vac-Met Inc. (3422) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/1/2009 0:00 NSL Central Testing LLC NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

10/1/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/1/2009 0:00 Bowman Plating, Inc (4199) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/1/2009 0:00 DICKSON TESTING CO NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

9/22/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/21/2009 0:00 Magellan Aerospace Processing - New York (4250) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS-2486 Inactive Spec Removed

9/4/2009 0:00 American Airlines - Tulsa CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

9/4/2009 0:00 American Airlines - Tulsa CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

Page (105) of (128)


Printed: 12/14/2018

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

8/31/2009 0:00 ANOD-TECH FINISHING INC. CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

8/31/2009 0:00 Magellan Aerospace, New York, Inc. HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

8/31/2009 0:00 Southwest United Canada Inc.(4197) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

8/31/2009 0:00 Southwest United Canada Inc.(4197) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

8/31/2009 0:00 TM Stewart Inc CP08 - ANODIZE ALUMINUM - HARD with TEFLON CR-1260 Inactive Spec Removed

8/20/2009 0:00 Brampton Processing (4648) CP08 - ANODIZE, TITANIUM MMC-205 Inactive Spec Removed

8/20/2009 0:00 Aerospace Metal Finishing (4994) CP08 - ANODIZE, TITANIUM MMC-205 Inactive Spec Removed

8/17/2009 0:00 Alp Aviation (7440) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

8/10/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) HT - STRESS RELIEF AMS-2759/11 Approved Spec Added

8/10/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) HT - STRESS RELIEF AMS-H-6875 Approved Spec Added

8/10/2009 0:00 Southwest United Canada Inc.(4197) SE - SHOT PEEN AMS-2430 Approved Spec Added

8/4/2009 0:00 Triumph Processing – Lynwood (4110) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/3/2009 0:00 PTI Industries Inc (3735) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

8/3/2009 0:00 Phoenix Heat Treating, Inc. (3698) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

8/3/2009 0:00 Aerospace Metal Finishing (4994) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

7/31/2009 0:00 Bodycote HIT Metal Technologies - FR AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

7/31/2009 0:00 Metcor Inc. (4781) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

7/29/2009 0:00 AIM Aerospace Sumner Inc. (6183) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/28/2009 0:00 VSMPO-AVISMA Corporation (4653) CP02 - TEMPER ETCH INSPECTION AMS-2643 Inactive Spec Removed

7/27/2009 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

7/27/2009 0:00 CONNELL PROCESSING CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

7/27/2009 0:00 CONNELL PROCESSING CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

7/27/2009 0:00 CONNELL PROCESSING AQS - QUALITY SYSTEM AS 9100 Inactive Spec Removed

7/27/2009 0:00 Dan's Certified Welding (5177) WLD - WELDING CPC-5204 Inactive Spec Removed

7/27/2009 0:00 Dan's Certified Welding (5177) WLD - WELDING AMS-STD-2219 Inactive Spec Removed

7/27/2009 0:00 Hohman Plating & Mfg., Inc. (3175) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Modification

7/15/2009 0:00 Southwest United Industries, Inc. (4185) SE - SHOT PEEN CPC-6400 Approved Spec Added

7/15/2009 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

7/14/2009 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Inactive Spec Removed

7/14/2009 0:00 Esterline Hytek Finishes (4508) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Inactive Spec Removed

7/14/2009 0:00 UMBRAGROUP S.P.A. (5269) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Inactive Spec Removed

7/14/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Inactive Spec Removed


7/14/2009 0:00 Cygnus, Inc. (4388) CP01 - COATING, PAINT APPLICATION MIL-PRF-23377 Inactive Spec Removed



7/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

7/13/2009 0:00 Superior Plating Company - CT (4160) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104 Approved Spec Added

7/13/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

7/7/2009 0:00 CALTECH Service Corp NA - CALIBRATION ISO17025 Approved Spec Modification

7/1/2009 0:00 Embee Processing, LLC. (3337) CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

7/1/2009 0:00 HDI Landing Gear - Springfield CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

7/1/2009 0:00 Noranco – Vaughan Division (12266) CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

Page (106) of (128)


Printed: 12/14/2018

7/1/2009 0:00 A.T.L.A.S. Aeronautik Inc. CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

7/1/2009 0:00 Temrick, Inc. CMSP - GRINDING, CHROME MMC-233 Superceded Spec Removed

6/30/2009 0:00 S & E Machine and Investments, LLC CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Removed

6/30/2009 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-H-6088 Not Approved Spec Removed

6/30/2009 0:00 Fokker Landing Gear B.V. (7454) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Approved Spec Modification

6/30/2009 0:00 AAA Plating & Inspection, Inc. (4342) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Modification

6/30/2009 0:00 AAA Plating & Inspection, Inc. (4342) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Modification

6/30/2009 0:00 Bodycote Thermal Processing - Gardena HT - HEAT TREAT AMS-H-6088 Not Approved Spec Removed

6/29/2009 0:00 Southwest United Industries, Inc. (4185) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

6/26/2009 0:00 Aluminum Precision Products - Oxnard (4780) HT - HEAT TREAT AMS-2772 Approved Spec Added

6/26/2009 0:00 Aluminum Precision Products - Oxnard (4780) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

6/19/2009 0:00 S&L Aerospace Metals LLC (3756) CMSP - GRINDING, CHROME CPC-6505 Inactive Spec Removed

6/14/2009 0:00 CANTON DROP FORGE (4423) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

6/14/2009 0:00 CANTON DROP FORGE (4423) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

6/10/2009 0:00 BODYCOTE BELGIUM (5610) HT - HEAT TREAT CP-0710 Not Approved Spec Removed

6/10/2009 0:00 BODYCOTE BELGIUM (5610) HT - HEAT TREAT AMS-H-6875 Not Approved Spec Removed

6/8/2009 0:00 Barry Avenue Plating (3067) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

6/8/2009 0:00 National Scale Technology NA - CALIBRATION ISO17025 Inactive Spec Removed

6/3/2009 0:00 Noranco – Vaughan Division (12266) CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

6/3/2009 0:00 National Technical Systems, Inc. NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

6/3/2009 0:00 Broadview Instrumentation Service NA - CALIBRATION ISO17025 Approved Spec Modification

6/3/2009 0:00 Embee Processing, LLC. (3337) CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

6/3/2009 0:00 Duval Precision Grinding Inc. (12095) CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

6/3/2009 0:00 Southwest United Industries, Inc. (4185) CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

6/3/2009 0:00 PAS Technologies - Phoenix (3378) CMSP - GRINDING, CHROME LGPS-7002 Inactive Spec Removed

6/3/2009 0:00 Mecaer America Inc. (12134) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Modification

6/2/2009 0:00 Taylor Certified Processing, Inc. (5114) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

6/2/2009 0:00 Taylor Certified Processing, Inc. (5114) SE - SHOT PEEN AMS-2430 Approved Spec Added

6/2/2009 0:00 PRODEM-BONNAS s.a. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

6/2/2009 0:00 PRODEM-BONNAS s.a. CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Removed

6/2/2009 0:00 PAS Technologies - Kansas City (5202) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

5/21/2009 0:00 Magnetic and Penetrant Services Company (4200) CP12 - TITANIUM CLEANING MIL-S-5002 Approved Spec Added

5/18/2009 0:00 RTI Claro Precision CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/13/2009 0:00 Tecnickrome Aeronautique Inc. (4760) CP10 - ELECTROLESS PLATING, NICKEL LGPS-1104 Approved Spec Added

5/8/2009 0:00 Strite Precision Machining Ltd. (12234) CP12 - PASSIVATION AMS-QQ-P-35 Superceded Spec Removed

5/8/2009 0:00 Superior Plating Company - CT (4160) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Final Finish Corp CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

5/8/2009 0:00 Saporito Finishing Co. (4274) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Saporito Finishing Co. (4274) CP09 - PLATING, CHROME AMS-2406 Approved Spec Added

5/8/2009 0:00 Westfield Electroplating (3443) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

Page (107) of (128)


Printed: 12/14/2018

5/8/2009 0:00 Tecnickrome Aeronautique Inc. (4760) CP12 - PASSIVATION AMS-QQ-P-35 Superceded Spec Removed

5/8/2009 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Brampton Processing (4648) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP12 - PASSIVATION AMS-QQ-P-35 Superceded Spec Removed

5/8/2009 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/8/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

5/7/2009 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP05 - CHEMICAL MILLING CPC-8224 Approved Spec Added

5/6/2009 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

5/6/2009 0:00 RUAG Australia Pty Ltd. (5422) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

5/6/2009 0:00 RUAG Australia Pty Ltd. (5422) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

5/6/2009 0:00 Tecnickrome Aeronautique Inc. (4760) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

5/5/2009 0:00 Blair / HSM Machine Works, Inc. (12230) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

5/5/2009 0:00 Barta's Precision Granite Surface Plate Co NA - CALIBRATION ISO17025 Approved Spec Modification

4/27/2009 0:00 TRI-PROCESS Company Inc (4428) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Modification

4/27/2009 0:00 TRI-PROCESS Company Inc (4428) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Modification

4/23/2009 0:00 HEIPLEX SPRINGS INC - CAD HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

4/23/2009 0:00 KHI GmbH & Co.KG Kunstharz Imprägnierung NA - COATING, VACUUM IMPREGNATED CHROME PS-11501 Approved Spec Removed

4/21/2009 0:00 AR Services NA - CALIBRATION ISO17025 Not Approved Spec Removed

4/16/2009 0:00 Certified Steel Treating Corp. (4256) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

4/16/2009 0:00 Bodycote Thermal Processing - Santa Fe Springs - Romandel Ave (3527)HT - HEAT TREAT AMS-2759/3 Approved Spec Modification

3/31/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-F-495 Inactive Spec Removed

3/31/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MMC-274 Inactive Spec Removed

3/31/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MMC-270 Inactive Spec Removed

3/31/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, TIN MIL-T-10727 Inactive Spec Removed

3/31/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, TIN AMS-2408 Inactive Spec Removed

3/31/2009 0:00 Aerospace Metal Finishing (4994) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/30/2009 0:00 Klinge Enameling Company (3287) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/30/2009 0:00 Klinge Enameling Company (3287) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/27/2009 0:00 Wolkerstorfer Co., Inc. (4026) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/27/2009 0:00 Wolkerstorfer Co., Inc. (4026) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

3/27/2009 0:00 Robert Wooler Co (4249) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/27/2009 0:00 Ramball Testlab NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/27/2009 0:00 Ramball Testlab NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/27/2009 0:00 Ramball Testlab AQS - QUALITY SYSTEM AC7004 Approved Spec Added

3/24/2009 0:00 New Hampshire Ball Bearings Inc (3229) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/23/2009 0:00 PAS Technologies - Kansas City (5202) CP12 - PASSIVATION LGPS-8003 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS HT - HEAT TREAT CP-0710 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS HT - HEAT TREAT AMS-2759 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP09 - PLATING, NICKEL LGPS-1104 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS AQS - QUALITY SYSTEM AS 9100 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP12 - PASSIVATION AMS-2700 Inactive Spec Modification

3/23/2009 0:00 GOODRICH ACTUATION SYS CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Modification

Page (108) of (128)


Printed: 12/14/2018

3/23/2009 0:00 Almet HT - HEAT TREAT AMS-2771 Inactive Spec Removed

3/23/2009 0:00 Almet HT - HEAT TREAT AMS-2770 Inactive Spec Removed

3/23/2009 0:00 Almet HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

3/23/2009 0:00 Almet AQS - QUALITY SYSTEM AQS Inactive Spec Removed

3/23/2009 0:00 Plating Perceptions, Inc. (4563) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

3/23/2009 0:00 Final Finish Corp CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/20/2009 0:00 MinebeaMitsumi Inc. - Fujisawa (5406) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

3/20/2009 0:00 MinebeaMitsumi Inc. - Nagano (5405) HT - HEAT TREAT AMS-2759/3 Approved Spec Modification

3/20/2009 0:00 MinebeaMitsumi Inc. - Nagano (5405) HT - HEAT TREAT AMS-2759/5 Approved Spec Modification

3/20/2009 0:00 MinebeaMitsumi Inc. - Nagano (5405) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Modification

3/20/2009 0:00 MinebeaMitsumi Inc. - Nagano (5405) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Modification

3/20/2009 0:00 MinebeaMitsumi Inc. - Nagano (5405) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

3/20/2009 0:00 Nippon Precision Casting Corp. (5418) HT - HEAT TREAT AMS-2771 Approved Spec Added

3/20/2009 0:00 Nippon Precision Casting Corp. (5418) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

3/20/2009 0:00 MinebeaMitsumi Inc. - Fujisawa (5406) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/20/2009 0:00 MinebeaMitsumi Inc. - Fujisawa (5406) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/18/2009 0:00 MinebeaMitsumi Inc. - Fujisawa (5406) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

3/18/2009 0:00 Triumph Processing – Lynwood (4110) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

3/17/2009 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Superior Plating Company - CT (4160) CP09 - PLATING, CHROME BP-102 Superceded Spec Removed

3/17/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Modification

3/17/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Modification

3/17/2009 0:00 Plating Perceptions, Inc. (4563) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Plating Perceptions, Inc. (4563) CP09 - PLATING, CHROME BP-102 Superceded Spec Removed

3/17/2009 0:00 Magellan Aerospace Processing - New York (4250) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Lego Finishing Center Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Hixson Metal Finishing (3174) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Advanced Coating Technique (4813) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) SE - SHOT PEEN AMS-2430 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP12 - PASSIVATION AMS-2700 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

3/17/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Added

3/17/2009 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, CHROME BP-102 Superceded Spec Removed

3/17/2009 0:00 Bowman Plating, Inc (4199) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/17/2009 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Superceded Spec Removed

3/16/2009 0:00 BASF Catalysts LLC NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed


Page (109) of (128)


Printed: 12/14/2018

3/16/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CHROME LGPS-1101 Approved Spec Added

3/16/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

3/16/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Added

3/11/2009 0:00 Taylor Certified Processing, Inc. (5114) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/11/2009 0:00 Asko Processing, Inc. (3049) CP14 - STRIPPING, HVOF LGPS-1300 Approved Spec Added

3/11/2009 0:00 GE AVIATION MSSA WLD - WELDING MIL-W-22248 Not Approved Spec Removed

3/10/2009 0:00 Parker Aerospace CP01 - COATING, DRY FILM MIL-PRF-46010 Inactive Spec Removed

3/6/2009 0:00 Phoenix Heat Treating, Inc. (3698) CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

3/6/2009 0:00 Phoenix Heat Treating, Inc. (3698) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

3/4/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Modification

3/4/2009 0:00 Alloyweld Inspection Company HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

3/4/2009 0:00 Alloyweld Inspection Company CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

3/4/2009 0:00 Alloyweld Inspection Company CP02 - TEMPER ETCH INSPECTION BP-108 Inactive Spec Removed

3/4/2009 0:00 Alloyweld Inspection Company CP12 - PASSIVATION MIL-S-5002 Inactive Spec Removed

3/4/2009 0:00 Cygnus, Inc. (4388) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

3/4/2009 0:00 Cygnus, Inc. (4388) HT - HEAT TREAT AMS-2770 Approved Spec Added

3/4/2009 0:00 Cygnus, Inc. (4388) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/3/2009 0:00 GTTOnSET NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

3/3/2009 0:00 GTTOnSET NDT - INSPECTION, ULTRASONIC MIL-STD-2154 Inactive Spec Removed

3/3/2009 0:00 MECACHROME MONTREAL-NORD INC CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

3/3/2009 0:00 MECACHROME MONTREAL-NORD INC AQS - QUALITY SYSTEM AQS Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP01 - COATING, DRY FILM MIL-PRF-46010 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

2/27/2009 0:00 TECHNICAL METAL FINISHING, INC. AQS - QUALITY SYSTEM AQS Inactive Spec Removed

2/19/2009 0:00 Tecnickrome Aeronautique Inc. (4760) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Southwest United Canada Inc.(4197) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Asko Processing - Color Tech Div. (4626) CP01 - COATING, DRY FILM MIL-L-46010 Superceded Spec Removed

2/19/2009 0:00 Protective Coatings, Inc. (4566) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Westfield Electroplating (3443) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Esterline Hytek Finishes (4508) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Magellan Aerospace Processing - New York (4250) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 California Metal Processing (4012) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 E/M Coating Services (3640) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Embee Processing, LLC. (3337) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 E/M Coating Services - CT (3639) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 All Metals Processing of Orange County, LLC (3320) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 AAA Plating & Inspection, Inc. (4342) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 AeroTek Manufacturing Limited - CAD (4434) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Barry Avenue Plating (3067) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/19/2009 0:00 Anodizing & Paint TNM Inc. (4687) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

2/17/2009 0:00 Fokker Landing Gear B.V. (7454) SE - SHOT PEEN AMS-2430 Approved Spec Modification

Page (110) of (128)


Printed: 12/14/2018

2/17/2009 0:00 VTN WITTEN (5170) HT - STRESS RELIEF AMS-2759/11 Approved Spec Modification

2/17/2009 0:00 Raymor Industries CT - HVOF LGPS-1301 Pulled Spec Removed

2/16/2009 0:00 PPI Aerospace LLC (Main) (3840) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Modification

2/16/2009 0:00 VACUUM DEPOSIT COATING INC. CP07 - IVD, CADMIUM CP-0200 Inactive Spec Removed

2/16/2009 0:00 VACUUM DEPOSIT COATING INC. CP07 - IVD, CADMIUM CP-0400 Inactive Spec Removed

2/13/2009 0:00 P M Testing Laboratory Inc (4535) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

2/11/2009 0:00 P M Testing Laboratory Inc (4535) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

2/9/2009 0:00 Dixon Hard Chrome, Inc (4214) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Inactive Spec Removed

2/9/2009 0:00 Dixon Hard Chrome, Inc (4214) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Inactive Spec Removed

2/6/2009 0:00 Bodycote Thermal Processing - Westminster (3516) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

2/6/2009 0:00 Bodycote Thermal Processing - Westminster (3516) HT - HEAT TREAT AMS-2771 Approved Spec Added



2/5/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP09 - PLATING, CADMIUM-TITANIUM AMS-2419 Approved Spec Added

2/5/2009 0:00 Sogo Spring Mfg. (7011) HT - HEAT TREAT AMS-2759/3 Approved Spec Added

2/5/2009 0:00 Sogo Spring Mfg. (7011) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/5/2009 0:00 Terauchi Manufacturing Co. Ltd. (7864) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/5/2009 0:00 S & E Machine and Investments, LLC SE - FLAPPER / ROTO PEENING MIL-R-81841 Inactive Spec Removed

2/5/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

2/5/2009 0:00 Metal Technology Co Ltd. - Kinzoku Giken (5394) HT - HEAT TREAT AMS-2759/3 Approved Spec Added


1/27/2009 0:00 Southwest United Canada Inc.(4197) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

1/26/2009 0:00 Pacific Metallurgical Inc. (4268) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/26/2009 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT AMS-2770 Approved Spec Added

1/26/2009 0:00 Ellison Surface Technologies(11369) CT - HVOF LGPS-1301 Inactive Spec Added


1/22/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

1/22/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

1/22/2009 0:00 Esterline Hytek Finishes (4508) CP12 - TITANIUM CLEANING ASTM-B-600 Approved Spec Added

1/21/2009 0:00 National Shot Peening Inc. (4558) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

1/20/2009 0:00 JAN-KENS CO. AQS - QUALITY SYSTEM AQS Inactive Spec Modification

1/20/2009 0:00 Kryler Corp. (4377) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

1/19/2009 0:00 Certified Steel Treating Corp. (4256) HT - HEAT TREAT AMS-H-7199 Approved Spec Added

1/15/2009 0:00 California Metal Processing (4012) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Bowman Plating, Inc (4199) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Brampton Processing (4648) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 Fokker Landing Gear B.V. (7454) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 E.M.E. Inc. (4111) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification


1/15/2009 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 ASCO Industries (5321) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Anodizing & Paint TNM Inc. (4687) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Barry Avenue Plating (3067) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Aviation Technical Services CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Modification

1/15/2009 0:00 AeroTek Manufacturing Limited - CAD (4434) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Aircraft X-Ray Laboratories, Inc. (3314) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

Page (111) of (128)


Printed: 12/14/2018

1/15/2009 0:00 Aerospace Metal Finishing (4994) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 All Metals Processing of Orange County, LLC (3320) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification


1/15/2009 0:00 Hixson Metal Finishing (3174) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 Hixson Metal Finishing (3174) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification


1/15/2009 0:00 GE AVIATION MSSA CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 3P Processing, Inc. (3310) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 NORTHSTAR AEROSPACE INC. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Modification

1/15/2009 0:00 Magellan Aerospace Processing - New York (4250) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Magnetic and Penetrant Services Company (4200) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Esterline Hytek Finishes (4508) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Final Finish Corp CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 Southwest United Industries, Inc. (4185) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 Saporito Finishing Co. (4274) CP09 - PLATING, NICKEL AMS-2403 Inactive Spec Modification

1/15/2009 0:00 PAS Technologies - Phoenix (3378) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

1/15/2009 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, NICKEL AMS-2403 Approved Spec Modification

1/15/2009 0:00 Protective Coatings, Inc. (4566) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Westfield Electroplating (3443) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Wolkerstorfer Co., Inc. (4026) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Triumph Processing – Lynwood (4110) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/15/2009 0:00 Ultraspec Finishing Inc. (4686) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

1/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Modification

1/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

1/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

1/13/2009 0:00 Ultraspec Finishing Inc. (4686) CP12 - PASSIVATION ASTM-A-967 Approved Spec Modification

1/13/2009 0:00 Metlab Potero HT - HEAT TREAT AMS-2759 Approved Spec Added

1/13/2009 0:00 AAA Plating & Inspection, Inc. (4342) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

1/12/2009 0:00 NORTHSTAR AEROSPACE INC. CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Removed

1/12/2009 0:00 NORTHSTAR AEROSPACE INC. HT - HEAT TREAT AMS-2759 Inactive Spec Removed

1/12/2009 0:00 NORTHSTAR AEROSPACE INC. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

1/12/2009 0:00 NORTHSTAR AEROSPACE INC. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

1/12/2009 0:00 NORTHSTAR AEROSPACE INC. CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

1/12/2009 0:00 WSK PZL-Rzeszow S.A. HT - HEAT TREAT AMS-2759/3 Inactive Spec Removed

1/12/2009 0:00 WSK PZL-Rzeszow S.A. HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

1/12/2009 0:00 WSK PZL-Rzeszow S.A. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

1/12/2009 0:00 WSK PZL-Rzeszow S.A. CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

1/12/2009 0:00 WSK PZL-Rzeszow S.A. CP09 - PLATING, NICKEL AMS-2424 Inactive Spec Removed

1/6/2009 0:00 Tekalia Aeronautik (2010) Inc (7875) CP12 - PASSIVATION AMS-2700 Approved Spec Added

1/6/2009 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

1/6/2009 0:00 Metal Technology Co Ltd. - Kinzoku Giken (5394) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

1/6/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - STRESS RELIEF AMS-2759/3 Approved Spec Modification

Page (112) of (128)


Printed: 12/14/2018

1/6/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - STRESS RELIEF AMS-H-6875 Approved Spec Modification

1/6/2009 0:00 Hi-Tech Metal Finishing (OLD LOCATION) HT - STRESS RELIEF CP-0540 Approved Spec Modification

1/6/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Kyoto (5162) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

1/6/2009 0:00 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) AQS - QUALITY SYSTEM JISQ9100 Approved Spec Added

12/18/2008 0:00 Hadd-Co Inspection Laboratory (4223) AQS - QUALITY SYSTEM AC7004 Approved Spec Added

12/18/2008 0:00 Hadd-Co Inspection Laboratory (4223) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

12/8/2008 0:00 HDI Landing gear - Cleveland (12098) SE - FLAPPER / ROTO PEENING MIL-R-81841 Inactive Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) CP12 - PASSIVATION ES-091 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) CP12 - PASSIVATION ASTM-A-967 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) CP12 - PASSIVATION AMS-2700 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

12/3/2008 0:00 S&L Aerospace Metals LLC (3756) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

12/3/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) HT - HEAT TREAT AMS-2759/5 Approved Spec Added

12/2/2008 0:00 Exactatherm Ltd. (4642) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

12/2/2008 0:00 Applus RTD Canada - Schomberg (5190) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

12/1/2008 0:00 Asko Processing, Inc. (3049) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

11/25/2008 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP09 - PLATING, COPPER AMS-2418 Approved Spec Added


11/17/2008 0:00 Sumitomo Precision Products Co. Ltd. (5058) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Tecnickrome Aeronautique Inc. (4760) SE - SHOT PEEN MIL-S-13165 Superceded Spec Removed

11/17/2008 0:00 Taylor Certified Processing, Inc. (5114) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Southwest United Industries, Inc. (4185) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Esterline Hytek Finishes (4508) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 RUAG Australia Pty Ltd. (5422) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

11/17/2008 0:00 Protective Coatings, Inc. (4566) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Peen-Rite Inc (5311) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Hydro Honing D/B/A Peening Tech. of CT (4068) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 TRI-PROCESS Company Inc (4428) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Asko Processing, Inc. (3049) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 ASCO Industries (5321) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Aviation Technical Services SE - SHOT PEEN AMS-2430 Inactive Spec Modification

11/17/2008 0:00 Alp Aviation (7440) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Fokker Landing Gear B.V. (7454) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 IMPACT FINISHERS SE - SHOT PEEN AMS-S-13165 Inactive Spec Removed

11/17/2008 0:00 Magellan Aerospace Processing - New York (4250) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Magnetic and Penetrant Services Company (4200) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Metal Improvement Co. - Phoenix (4834) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Metal Improvement Co. - Addison (5455) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO. - Bayone France SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Metal Improvement Co. - Brampton (5532) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO. - Blue Ash (4724) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO. - Bensalem SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 PAS Technologies - Kansas City (5202) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 National Peening - NC (4447) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 3P Processing, Inc. (3310) SE - SHOT PEEN AMS-2430 Approved Spec Modification

Page (113) of (128)


Printed: 12/14/2018

11/17/2008 0:00 National Shot Peening Inc. (4558) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Metal improvement Co. - Romulus (5013) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Metal Improvement Co. - Grand Prairie (5535) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO. - Twinsburg (5229) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO. -CHESTER SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/17/2008 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/14/2008 0:00 Abrasive Finishing Co. (5490) SE - SHOT PEEN AMS-S-13165 Superceded Spec Removed

11/10/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

11/6/2008 0:00 DutchAero B.V. CT - HVOF LGPS-1301 Inactive Spec Added

11/3/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP12 - PASSIVATION MMC-117 Superceded Spec Removed

11/3/2008 0:00 Asko Processing - Color Tech Div. (4626) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

11/3/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP12 - PASSIVATION MMC-117 Superceded Spec Removed

11/3/2008 0:00 Strite Precision Machining Ltd. (12234) CP12 - PASSIVATION MMC-117 Superceded Spec Removed

10/24/2008 0:00 HTG Thermal Treatment Center HT - HEAT TREAT MM-4995 Pulled Spec Removed

10/24/2008 0:00 HTG Thermal Treatment Center HT - HEAT TREAT CPC-6203 Pulled Spec Removed



10/24/2008 0:00 HTG Thermal Treatment Center HT - HEAT TREAT MM-4990 Pulled Spec Removed


10/24/2008 0:00 HTG Thermal Treatment Center HT - HEAT TREAT MIL-H-7199 Pulled Spec Removed

10/17/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

10/17/2008 0:00 Duval Precision Grinding Inc. (12095) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

10/17/2008 0:00 Duval Precision Grinding Inc. (12095) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

10/15/2008 0:00 EAGLETRONIC CMSP - GRINDING, CHROME MIL-STD-866 Pulled Spec Removed

10/15/2008 0:00 Blair / HSM Machine Works, Inc. (12230) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

10/15/2008 0:00 Strite Precision Machining Ltd. (12234) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Added

10/15/2008 0:00 Strite Precision Machining Ltd. (12234) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

10/15/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

10/15/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) CT - HVOF LGPS-1301 Approved Spec Added

10/15/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

10/14/2008 0:00 Allen Aircraft Products, Inc. (4339) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Modification

10/7/2008 0:00 NSL Analytical Services (3236) NA - LABORATORY / TESTING ISO 17025 Approved Spec Modification

10/7/2008 0:00 Vac-Aero International -Oakville (3420) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/7/2008 0:00 XRI Testing - Cleveland (3467) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

10/6/2008 0:00 Metcor Inc. (4781) NA - LABORATORY / TESTING A2LA Not Approved Spec Removed

10/6/2008 0:00 Hercules Heat Treating Corp (3166) NA - LABORATORY / TESTING A2LA Not Approved Spec Removed

10/6/2008 0:00 Dip Braze, Inc. (3620) WLD - BRAZING MIL-B-7883 Inactive Spec Removed

10/6/2008 0:00 Dip Braze, Inc. (3620) HT - HEAT TREAT AMS-2770 Inactive Spec Removed

10/3/2008 0:00 Fokker Landing Gear B.V. (7454) CMSP - GRINDING, CHROME LGPS-7000 Approved Spec Modification

10/3/2008 0:00 Fokker Landing Gear B.V. (7454) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Modification

10/2/2008 0:00 e2b Teknologies NA - CALIBRATION ISO 17025 Approved Spec Added

10/2/2008 0:00 Ellwood Texas Forge (Navasota) HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

10/2/2008 0:00 Ellwood Texas Forge (Navasota) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

10/2/2008 0:00 Quality Heat Treating (4407) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

10/2/2008 0:00 Service & Sales, Inc. (3773) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

10/2/2008 0:00 Service & Sales, Inc. (3773) WLD - WELDING AWS-D17.1 Approved Spec Added

10/2/2008 0:00 RUAG Australia Pty Ltd. (5422) SE - SHOT PEEN AMS-2430 Approved Spec Added

Page (114) of (128)


Printed: 12/14/2018

10/2/2008 0:00 RUAG Australia Pty Ltd. (5422) CP01 - COATING, DRY FILM MIL-PRF-46010 Approved Spec Added

9/30/2008 0:00 Aerocraft Heat Treating Co., Inc. (3112) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/29/2008 0:00 Hercules Heat Treating Corp (3166) HT - HEAT TREAT AMS-H-6088 Superceded Spec Removed

9/26/2008 0:00 Plasma Coating Corp (4754) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/24/2008 0:00 KLUNE INDUSTRIES CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Not Approved Spec Removed

9/23/2008 0:00 RUAG Australia Pty Ltd. (5422) CMSP - GRINDING, CHROME MIL-STD-866 Approved Spec Added

9/22/2008 0:00 Hixson Metal Finishing (3174) AQS - QUALITY SYSTEM AS 9100 Approved Spec Modification

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, NICKEL AMS-QQ-N-290 Inactive Spec Removed

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) CP12 - PASSIVATION ASTM-A-967 Inactive Spec Removed

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) CP12 - PASSIVATION MIL-S-5002 Not Approved Spec Removed

9/22/2008 0:00 Dixon Hard Chrome, Inc (4214) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

9/17/2008 0:00 Duval Precision Grinding Inc. (12095) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/17/2008 0:00 D & R INDUSTRIES INC. CMSP - GRINDING, CHROME LGPS-7000 Not Approved Spec Removed

9/17/2008 0:00 D & R INDUSTRIES INC. CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

9/17/2008 0:00 D & R INDUSTRIES INC. CMSP - GRINDING, CHROME CPC-6505 Not Approved Spec Removed

9/17/2008 0:00 Hixson Metal Finishing (3174) CP07 - IVD, CADMIUM CPC-8210 Approved Spec Modification

9/10/2008 0:00 Magnetic and Penetrant Services Company (4200) CP12 - TITANIUM CLEANING LGPS-8003 Approved Spec Added

9/10/2008 0:00 DutchAero B.V. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Added

9/10/2008 0:00 Precision Analytical, Inc. NA - LABORATORY / TESTING N/A Approved Spec Added

9/10/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

9/10/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

9/10/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) SE - SHOT PEEN AMS-2430 Approved Spec Added

9/10/2008 0:00 Tekalia Aeronautik (2010) Inc (7875) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/9/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

9/9/2008 0:00 Esterline Hytek Finishes (4508) CP12 - TITANIUM CLEANING LGPS-8003 Not Approved Spec Removed

9/6/2008 0:00 SIFCO Applied Surface Concepts HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

9/6/2008 0:00 SIFCO Applied Surface Concepts CP13 - PLATING, BRUSH, OTHER AMS-2451 Inactive Spec Removed

9/6/2008 0:00 SIFCO Applied Surface Concepts CP13 - PLATING, BRUSH CADMIUM CPC-8215 Not Approved Spec Removed

9/6/2008 0:00 SIFCO Applied Surface Concepts CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Removed

9/6/2008 0:00 SIFCO Applied Surface Concepts CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Inactive Spec Removed

9/6/2008 0:00 Ircon, Inc. NA - CALIBRATION ISO 10012-1 Pulled Spec Removed

9/5/2008 0:00 General Metal Heat Treat (4457) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

9/5/2008 0:00 Allen Aircraft Products, Inc. (4339) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

8/20/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, NICKEL LGPS-1104 Not Approved Spec Removed

8/18/2008 0:00 RUAG Australia Pty Ltd. (5422) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

8/18/2008 0:00 RUAG Australia Pty Ltd. (5422) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

8/12/2008 0:00 V & M PRECISION MACHINE & GRINDING CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 American Aircraft Parts Mfg. (3332) CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 Magellan Aerospace, New York, Inc. CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 Embee Processing, LLC. (3337) CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 HDI Landing Gear - Springfield CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 HDI Landing gear - Cleveland (12098) CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 Globe Grinding Corp (5871) CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/12/2008 0:00 Heroux Devtek Kitchener CMSP - GRINDING, CHROME CPC-6505 Superceded Spec Removed

8/6/2008 0:00 Sermatech - Oakville CT - HVOF LGPS-1301 Inactive Spec Removed

8/6/2008 0:00 Sermatech - Oakville CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

Page (115) of (128)


Printed: 12/14/2018

8/4/2008 0:00 Missouri Metals HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

7/31/2008 0:00 GODFREY & WING, INC. NA - COATING, VACUUM IMPREGNATED CHROME PS-11501 Inactive Spec Removed

7/28/2008 0:00 Esterline Hytek Finishes (4508) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

7/17/2008 0:00 Embee Processing, LLC. (3337) HT - STRESS RELIEF PS-2101 Inactive Spec Added

7/16/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Asko Processing, Inc. (3049) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Alp Aviation (7440) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Abrasive Finishing Co. (5490) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 IMPACT FINISHERS SE - SHOT PEEN AMS-2430 Inactive Spec Removed

7/16/2008 0:00 Magnetic and Penetrant Services Company (4200) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 METAL IMPROVEMENT CO. - Blue Ash (4724) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Metal Improvement Co. - Addison (5455) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Mecaer Aviation Group S.p.A. (10206) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Metal Improvement Co. - Brampton (5532) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 METAL IMPROVEMENT CO. - Bayone France SE - SHOT PEEN AMS-2430 Inactive Spec Added

7/16/2008 0:00 Metal Improvement Co. - Phoenix (4834) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Magellan Aerospace Processing - New York (4250) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 METAL IMPROVEMENT CO. - Twinsburg (5229) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Curtiss Wright Metal Improvement Co. - Santa Ana (4070) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Metal Improvement Co. - Grand Prairie (5535) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Metal improvement Co. - Romulus (5013) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 National Peening - NC (4447) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 National Shot Peening Inc. (4558) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 PAS Technologies - Kansas City (5202) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Esterline Hytek Finishes (4508) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 ASCO Industries (5321) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Southwest United Industries, Inc. (4185) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Sumitomo Precision Products Co. Ltd. (5058) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Protective Coatings, Inc. (4566) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Hydro Honing D/B/A Peening Tech. of CT (4068) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/16/2008 0:00 Peen-Rite Inc (5311) SE - SHOT PEEN AMS-2430 Approved Spec Added

7/15/2008 0:00 RATIER FIGEAC CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, CADMIUM-TITANIUM MMC-195 Superceded Spec Removed

7/15/2008 0:00 Strite Precision Machining Ltd. (12234) CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CADMIUM-TITANIUM MM-5542 Superceded Spec Removed

7/15/2008 0:00 WSK PZL-Rzeszow S.A. CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Orbit Industries (3243) CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Magellan Aerospace Processing - New York (4250) CP09 - PLATING, CADMIUM-TITANIUM MM-5542 Superceded Spec Removed

7/15/2008 0:00 Magellan Aerospace Processing - New York (4250) CP09 - PLATING, CADMIUM-TITANIUM MMC-195 Superceded Spec Removed

7/15/2008 0:00 Magellan Aerospace Processing - New York (4250) CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Arrow Gear CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/15/2008 0:00 Magellan Aerospace-Kitchener CP02 - TEMPER ETCH INSPECTION MMC-190 Superceded Spec Removed

7/11/2008 0:00 Sermatech Power Solutions LP CT - HVOF LGPS-1301 Not Approved Spec Removed

7/8/2008 0:00 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) HT - HEAT TREAT LGPS-2000 Approved Spec Added

6/26/2008 0:00 Heroux Devtek Kitchener CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

6/26/2008 0:00 Heroux Devtek Kitchener CP13 - PLATING, BRUSH, OTHER MIL-STD-865 Not Approved Spec Removed

Page (116) of (128)


Printed: 12/14/2018

6/25/2008 0:00 HDI Landing gear - Cleveland (12098) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive Spec Removed

6/25/2008 0:00 HDI Landing gear - Cleveland (12098) CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 Inactive Spec Removed

6/19/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

6/12/2008 0:00 Cal-Corr Services & Repairs NA - CALIBRATION ISO17025 Approved Spec Modification

6/12/2008 0:00 Inspec, Inc. NA - CALIBRATION ISO 17025 Approved Spec Added

6/12/2008 0:00 Magnetic and Penetrant Services Company (4200) CP12 - PASSIVATION ASTM-A-967 Approved Spec Added

6/11/2008 0:00 Kryler Corp. (4377) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/11/2008 0:00 Kryler Corp. (4377) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Hohman Plating & Mfg., Inc. (3175) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Electrolizing, Inc. (4228) CP09 - PLATING, CHROME AMS-QQ-C-320 Superceded Spec Removed

6/11/2008 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/11/2008 0:00 Dixon Hard Chrome, Inc (4214) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, CHROME AMS-2460 Approved Spec Modification

6/11/2008 0:00 Diamond Chrome Plating, Inc. (3618) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/11/2008 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/11/2008 0:00 Size Control Plating Co. (3952) CP09 - PLATING, CHROME AMS-2460 Inactive Spec Added

6/11/2008 0:00 Size Control Plating Co. (3952) CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Modification

6/11/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

6/11/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/11/2008 0:00 Esterline Hytek Finishes (4508) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

6/9/2008 0:00 KING & FOWLER LTD. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

6/9/2008 0:00 KING & FOWLER LTD. NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

6/9/2008 0:00 KING & FOWLER LTD. CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

6/9/2008 0:00 KING & FOWLER LTD. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Removed

6/9/2008 0:00 KING & FOWLER LTD. CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Not Approved Spec Removed

6/9/2008 0:00 KING & FOWLER LTD. CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

6/5/2008 0:00 VSMPO-AVISMA Corporation (4653) NDT - INSPECTION, ULTRASONIC AMS-2631 Approved Spec Added

6/4/2008 0:00 Engineered Heat Treat, Inc. (3341) HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed

6/4/2008 0:00 Aero-Safe Processing Inc. NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Pulled Spec Modification

6/3/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, CHROME CPC-8207 Inactive Spec Removed

6/3/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, CHROME LGPS-1101 Inactive Spec Removed

6/3/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP09 - PLATING, CHROME AMS-QQ-C-320 Inactive Spec Removed

6/3/2008 0:00 Deloro Stellite Surface Technologies AQS - QUALITY SYSTEM AS 9100 Inactive Spec Added

6/3/2008 0:00 Deloro Stellite Surface Technologies CP14 - STRIPPING, HVOF LGPS-1300 Inactive Spec Modification

6/3/2008 0:00 Deloro Stellite Surface Technologies CT - HVOF LGPS-1301 Inactive Spec Removed

5/30/2008 0:00 Applied Technical Services, Inc. NA - CALIBRATION ISO17025 Approved Spec Modification

5/28/2008 0:00 HYDROMASH HT - HEAT TREAT AMS-H-81200 Inactive Spec Removed

5/28/2008 0:00 HYDROMASH NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/28/2008 0:00 HYDROMASH CP12 - TITANIUM CLEANING LGPS-8003 Inactive Spec Removed

5/27/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Modification

5/27/2008 0:00 UMBRAGROUP S.P.A. (5269) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Modification

5/27/2008 0:00 UMBRAGROUP S.P.A. (5269) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

5/27/2008 0:00 UMBRAGROUP S.P.A. (5269) HT - HEAT TREAT AMS-2759 Approved Spec Modification

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

Page (117) of (128)


Printed: 12/14/2018

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP12 - PASSIVATION AMS-2700 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

5/27/2008 0:00 RUAG Australia Pty Ltd. (5422) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

5/20/2008 0:00 Embee Processing, LLC. (3337) CP01 - COATING, PAINT APPLICATION BR-167 Approved Spec Added

5/16/2008 0:00 Asko Processing, Inc. (3049) CT - HVOF AMS-2448 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CT - HVOF LGPS-1301 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CMSP - GRINDING, CHROME CPC-6505 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CMSP - GRINDING, HVOF LGPS-7010 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CMSP - GRINDING, HVOF AMS-2449 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CP01 - COATING, PAINT APPLICATION LGPS-1001 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

5/16/2008 0:00 Asko Processing, Inc. (3049) CT - HVOF AMS-2447 Inactive Spec Removed

5/12/2008 0:00 Imagineering Finishing Technologies (3203) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

5/12/2008 0:00 Imagineering Finishing Technologies (3203) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

5/12/2008 0:00 Imagineering Finishing Technologies (3203) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

5/8/2008 0:00 Avofix NDT LTD NA - CALIBRATION ISO17025 Approved Spec Modification

5/8/2008 0:00 Electronic Metrology Laboratory NA - CALIBRATION ISO 17025 Approved Spec Added

5/6/2008 0:00 Blair / HSM Machine Works, Inc. (12230) NA - ROUGH MACHINING TBD Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton HT - HEAT TREAT AMS-2759/3 Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Inactive Spec Removed

5/5/2008 0:00 GOODRICH ACTUATION SYSTEMS - Huyton CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

5/2/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT MM-4990 Inactive Spec Added

5/1/2008 0:00 Magellan Aerospace-Kitchener CP01 - COATING, DRY FILM MMC-155 Inactive Spec Removed

5/1/2008 0:00 Magellan Aerospace-Kitchener CP01 - COATING, DRY FILM MIL-L-46010 Inactive Spec Removed

4/30/2008 0:00 HTA Aerospace and Defense Pty Ltd - Brisbane (9678) HT - HEAT TREAT AMS-2759/1 Approved Spec Added


4/29/2008 0:00 RAMICK WELDING AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

4/29/2008 0:00 RAMICK WELDING WLD - WELDING MIL-W-22248 Not Approved Spec Removed

4/29/2008 0:00 RAMICK WELDING WLD - WELDING AWS-D17.1 Not Approved Spec Removed

4/25/2008 0:00 Bodycote Thermal Processing - Huntington Park (3307) CP09 - PLATING, COPPER AMS-2418 Approved Spec Added

4/24/2008 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Modification

4/24/2008 0:00 Triumph Fabrications - Ft. Worth (4651) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

4/23/2008 0:00 PPI Aerospace LLC (Main) (3840) AQS - QUALITY SYSTEM AC7004 Approved Spec Modification

4/22/2008 0:00 PAS Technologies - Phoenix (3378) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Approved Spec Added

4/22/2008 0:00 DESIGN. MET. CONN. (DMC) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

4/22/2008 0:00 Anodyne, Inc. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP11 - CONVERSION COATING, ALUMINUM MM-5516 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP01 - COATING, DRY FILM MIL-L-46010 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Pulled Spec Modification

Page (118) of (128)


Printed: 12/14/2018

4/22/2008 0:00 Anodyne, Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP09 - PLATING, COPPER AMS-2418 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP09 - PLATING, NICKEL AMS-QQ-N-290 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. AQS - QUALITY SYSTEM AS 9100 Pulled Spec Modification

4/22/2008 0:00 Anodyne, Inc. CP12 - PASSIVATION MIL-S-5002 Pulled Spec Modification

4/18/2008 0:00 Fokker Landing Gear B.V. (7454) NDT - INSPECTION, MAGNETIC PARTICLE MM-5537 Approved Spec Added

4/18/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, NICKEL MMC-176 Superceded Spec Modification

4/17/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CHROME AMS-2460 Approved Spec Added

4/17/2008 0:00 Tecnickrome Aeronautique Inc. (4760) CP09 - PLATING, CHROME AMS-QQ-C-320 Superceded Spec Modification

4/17/2008 0:00 RONALDSWAY AIRCRAFT HT - HEAT TREAT AMS-2759 Inactive Spec Removed

4/17/2008 0:00 RONALDSWAY AIRCRAFT NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

4/17/2008 0:00 RONALDSWAY AIRCRAFT CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

4/17/2008 0:00 RONALDSWAY AIRCRAFT NA - LABORATORY / TESTING A2LA Inactive Spec Removed

4/16/2008 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

4/16/2008 0:00 K&L Anodizing (4908) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added


4/14/2008 0:00 Tecnickrome Aeronautique Inc. (4760) SE - SHOT PEEN AMS-2430 Approved Spec Added

4/14/2008 0:00 NASSAU TOOL WORKS, INC. CMSP - GRINDING, CHROME MIL-STD-866 Not Approved Spec Removed

4/14/2008 0:00 NASSAU TOOL WORKS, INC. CMSP - GRINDING, CHROME LGPS-7000 Not Approved Spec Removed

4/14/2008 0:00 NASSAU TOOL WORKS, INC. CMSP - GRINDING, CHROME CPC-6505 Not Approved Spec Removed

4/11/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

4/10/2008 0:00 Magellan Aerospace-Kitchener CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

4/10/2008 0:00 Magellan Aerospace-Kitchener CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

4/10/2008 0:00 Magellan Aerospace-Kitchener CMSP - GRINDING, CHROME CPC-6505 Inactive Spec Removed

4/4/2008 0:00 CANTON DROP FORGE (4423) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Inactive Spec Removed

4/2/2008 0:00 Southwest United Canada Inc. - CEEL Limited (5208) CT - HVOF LGPS-1301 Approved Spec Added

3/31/2008 0:00 SOUTHWEST GRINDING CMSP - GRINDING, CHROME CPC-6505 Inactive Spec Removed

3/30/2008 0:00 Magnetic Inspection Laboratory, Inc. (3487) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

3/28/2008 0:00 E.M.E. Inc. (4111) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924 Inactive Spec Removed

3/27/2008 0:00 Sumitomo Precision Products Co. Ltd. (5058) CP11 - CONVERSION COATING, ALUMINUM MIL-C-5541 Approved Spec Added

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CHROME AMS-QQ-C-320 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MM-4951 (Superceded by LGPS 1100) Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

3/26/2008 0:00 Fokker Landing Gear B.V. (7454) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Modification

3/25/2008 0:00 E.M.E. Inc. (4111) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Modification

3/25/2008 0:00 E.M.E. Inc. (4111) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN CPC-8218 Inactive Spec Removed

3/18/2008 0:00 Aremac Heat Treating (3044) HT - HEAT TREAT AMS-H-81200 Approved Spec Added

3/18/2008 0:00 Aremac Heat Treating (3044) HT - HEAT TREAT AMS-H-6875 Approved Spec Added

Page (119) of (128)


Printed: 12/14/2018

3/17/2008 0:00 Southwest United Industries, Inc. (4185) CP09 - PLATING, CHROME PS-1033 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CHROME LGPS-1101 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CHROME MIL-STD-1501 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP09 - PLATING, NICKEL AMS-2424 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP02 - TEMPER ETCH INSPECTION AMS-2649 Approved Spec Added

3/15/2008 0:00 PAS Technologies - Phoenix (3378) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Approved Spec Added

3/13/2008 0:00 Aluminum Precision Products - Santa Ana - Warner (4666) HT - HEAT TREAT MIL-H-6088 Approved Spec Added

3/13/2008 0:00 Aluminum Precision Products - Santa Ana - Warner (4666) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/13/2008 0:00 AAA Plating & Inspection, Inc. (4342) AQS - QUALITY SYSTEM AS 9100 Approved Spec Added

3/13/2008 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT ES-0744 Approved Spec Added

3/12/2008 0:00 S&L Aerospace Metals LLC (3756) HT - HEAT TREAT AMS-H-6875 Not Approved Spec Modification

3/12/2008 0:00 S&L Aerospace Metals LLC (3756) HT - HEAT TREAT AMS-H-6088 Not Approved Spec Modification

3/12/2008 0:00 S&L Aerospace Metals LLC (3756) HT - HEAT TREAT BP-106 Not Approved Spec Modification


3/12/2008 0:00 S&L Aerospace Metals LLC (3756) HT - HEAT TREAT AMS-2759 Not Approved Spec Modification



3/11/2008 0:00 Continental Heat Treating Corp (3588) HT - HEAT TREAT PS-2101 Approved Spec Added

3/5/2008 0:00 Aerospace Metal Finishing (4994) CP12 - PASSIVATION AMS-2700 Approved Spec Modification

3/4/2008 0:00 JAN-KENS CO. CP01 - COATING, PAINT APPLICATION MIL-STD-7179 Inactive Spec Added

3/4/2008 0:00 JAN-KENS CO. CP01 - COATING, PAINT APPLICATION MIL-F-18264 Inactive Spec Added

2/29/2008 0:00 E.M.E. Inc. (4111) CP02 - TEMPER ETCH INSPECTION MIL-STD-867 Inactive Spec Removed

2/29/2008 0:00 E.M.E. Inc. (4111) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Inactive Spec Removed

2/29/2008 0:00 E.M.E. Inc. (4111) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Approved Spec Modification

2/29/2008 0:00 RBC Transport Dynamics (4312) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP13 - PLATING, BRUSH, OTHER CPC-8215 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP13 - PLATING, BRUSH, OTHER MIL-STD-865 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP09 - PLATING, CADMIUM (BRIGHT/LHE) CPC-8204 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP12 - PASSIVATION AMS-2700 Inactive Spec Removed

2/29/2008 0:00 RBC Transport Dynamics (4312) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Inactive Spec Removed

2/29/2008 0:00 VSMPO-AVISMA Corporation (4653) NDT - INSPECTION, ULTRASONIC AMS-STD-2154 Approved Spec Modification

2/28/2008 0:00 ELEB EMBRARER LIEBHERR HT - HEAT TREAT AMS-2759 Not Approved Spec Removed

Page (120) of (128)


Printed: 12/14/2018

2/28/2008 0:00 ELEB EMBRARER LIEBHERR NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Not Approved Spec Removed

2/28/2008 0:00 ELEB EMBRARER LIEBHERR NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Not Approved Spec Removed

2/28/2008 0:00 ELEB EMBRARER LIEBHERR CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Not Approved Spec Removed

2/28/2008 0:00 ELEB EMBRARER LIEBHERR CP09 - PLATING, CHROME AMS-QQ-C-320 Not Approved Spec Removed

2/28/2008 0:00 ELEB EMBRARER LIEBHERR AQS - QUALITY SYSTEM AQS Not Approved Spec Removed

2/28/2008 0:00 ELEB EMBRARER LIEBHERR SE - SHOT PEEN AMS-S-13165 Not Approved Spec Removed

2/28/2008 0:00 Allen Aircraft Products, Inc. (4339) CP01 - COATING, PAINT APPLICATION LGPS-1001 Approved Spec Added

2/28/2008 0:00 Allen Aircraft Products, Inc. (4339) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

2/27/2008 0:00 Vac-Aero International -Oakville (3420) NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

2/27/2008 0:00 Vac-Aero International -Oakville (3420) WLD - WELDING AWS-D17.1 Approved Spec Added

2/27/2008 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT AMS-H-81200 Approved Spec Added


2/27/2008 0:00 Vac-Aero International -Oakville (3420) WLD - BRAZING AWS-C3.3 Approved Spec Added


2/27/2008 0:00 Vac-Aero International -Oakville (3420) HT - HEAT TREAT LGPS-2000 Approved Spec Added

2/26/2008 0:00 2Source Manufacturing INC. WLD - BRAZING MMC-370 Inactive Spec Removed

2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT MIL-H-7199 Inactive Spec Modification

2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT BP-118 Inactive Spec Removed

2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT AMS-H-6088 Inactive Spec Removed


2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT CPC-6201 Inactive Spec Removed


2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT MM-4995 Inactive Spec Removed


2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT CP-0710 Inactive Spec Removed


2/25/2008 0:00 BODYCOTE THERMAL PROCESSING - Tarzana HT - HEAT TREAT CP-0360 Inactive Spec Removed

2/19/2008 0:00 JOHNSON ENGINEERING PRODUCTS NA - CALIBRATION ISO17025 Not Approved Spec Removed

2/19/2008 0:00 Tritech Laboratories NA - LABORATORY / TESTING ISO 17025 Inactive Spec Removed

2/19/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Approved Spec Added

2/19/2008 0:00 Reska Spline Products Co NA - CALIBRATION ISO 10012-1 Not Approved Spec Removed

2/19/2008 0:00 Smithers Scientific Services NA - LABORATORY / TESTING ISO 17025 Approved Spec Added

2/18/2008 0:00 Kalt Manufacturing Co NA - CALIBRATION ISO 10012-1 Approved Spec Modification

2/15/2008 0:00 MAHR FEDERAL, INC. NA - CALIBRATION ISO17025 Inactive Spec Removed

2/14/2008 0:00 PTR Precision Technologies Inc WLD - WELDING Inactive Spec Removed

2/14/2008 0:00 PCC Structurals - Carson City HT - HEAT TREAT AMS-H-6875 Inactive Spec Removed

2/14/2008 0:00 PCC Structurals - Carson City NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Inactive Spec Removed

2/14/2008 0:00 PCC Structurals - Carson City NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Inactive Spec Removed

2/14/2008 0:00 PCC Structurals - Carson City NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Inactive Spec Removed

2/14/2008 0:00 PCC Structurals - Carson City WLD - WELDING AMS-STD-1595 Inactive Spec Removed

2/13/2008 0:00 LAMSCO WEST, INC. CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Not Approved Spec Removed

2/13/2008 0:00 VAHL, INC. CMSP - GRINDING, CHROME LGPS-7000 Not Approved Spec Removed

2/13/2008 0:00 VAHL, INC. CMSP - GRINDING, CHROME CPC-6505 Not Approved Spec Removed

2/13/2008 0:00 VAHL, INC. CMSP - GRINDING, CHROME MIL-STD-866 Not Approved Spec Removed

2/13/2008 0:00 COUSSO s.a. HT - HEAT TREAT AMS-2759/2 Not Approved Spec Removed

2/13/2008 0:00 COUSSO s.a. HT - HEAT TREAT CP-0710 Not Approved Spec Removed

2/13/2008 0:00 COUSSO s.a. CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed


Page (121) of (128)


Printed: 12/14/2018



2/11/2008 0:00 Alp Aviation (7440) HT - HEAT TREAT AMS-2770 Approved Spec Added


2/8/2008 0:00 Acroturn Industries, Inc. NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Not Approved Spec Removed

2/7/2008 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Inactive Spec Removed

2/7/2008 0:00 Allen Aircraft Products, Inc. (4339) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) BP-111 Inactive Spec Removed

2/7/2008 0:00 Allen Aircraft Products, Inc. (4339) CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN CPC-8218 Inactive Spec Removed

2/7/2008 0:00 METAL IMPROVEMENT CO-ST TRUIDEN (5534) SE - SHOT PEEN MMC-137 Approved Spec Added

2/6/2008 0:00 E.W. JOHNSON COMPANY CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Not Approved Spec Removed

2/6/2008 0:00 E.W. JOHNSON COMPANY CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Not Approved Spec Removed

2/6/2008 0:00 E.W. JOHNSON COMPANY CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Not Approved Spec Removed

2/6/2008 0:00 E.W. JOHNSON COMPANY AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

2/1/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM-TITANIUM MMC-195 Not Approved Spec Removed

2/1/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103 Not Approved Spec Removed

2/1/2008 0:00 Fokker Landing Gear B.V. (7454) CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500 Not Approved Spec Removed

2/1/2008 0:00 PIONEER METAL FINISHING CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Pulled Spec Removed

2/1/2008 0:00 PIONEER METAL FINISHING CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 Pulled Spec Removed

2/1/2008 0:00 PIONEER METAL FINISHING CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 Pulled Spec Removed

2/1/2008 0:00 PIONEER METAL FINISHING AQS - QUALITY SYSTEM AS 9100 Pulled Spec Removed

1/31/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417 Approved Spec Modification

1/31/2008 0:00 AECC Xi’an Engine Control Technology Co.Ltd. (7151) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Modification

1/31/2008 0:00 Engineered Heat Treat, Inc. (3341) HT - HEAT TREAT LGPS-2000 Approved Spec Added

1/30/2008 0:00 Poly Metal Finishing, Inc. (3705) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved Spec Modification

1/29/2008 0:00 ATI ZKM Forging sp. z o.o. (8184) HT - HEAT TREAT AMS-2759/2 Approved Spec Added

1/29/2008 0:00 ATI ZKM Forging sp. z o.o. (8184) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

1/29/2008 0:00 Aerospace Testing Lab Inc. (3117) CP02 - TEMPER ETCH INSPECTION LGPS-3000 Not Approved Spec Removed

1/29/2008 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416 Approved Spec Modification

1/29/2008 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870 Approved Spec Modification

1/29/2008 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100 Approved Spec Added

1/29/2008 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400 Approved Spec Added

1/28/2008 0:00 VTN WITTEN (5170) HT - HEAT TREAT AMS-H-6088 Inactive Spec Added

1/28/2008 0:00 Tiodize Co., Inc. CP08 - ANODIZE, TITANIUM AMS-2488 Approved Spec Modification

1/28/2008 0:00 PRO COATING COMPANY CP01 - COATING, DRY FILM MIL-L-46010 Not Approved Spec Removed

1/28/2008 0:00 PRO COATING COMPANY CP01 - COATING, DRY FILM MM-1920 Not Approved Spec Removed

1/28/2008 0:00 PRO COATING COMPANY CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Not Approved Spec Removed

1/28/2008 0:00 PRO COATING COMPANY AQS - QUALITY SYSTEM AS 9100 Not Approved Spec Removed

1/28/2008 0:00 Technical Maintenance, Inc. NA - CALIBRATION ISO 17025 Approved Spec Added

1/24/2008 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT CP-0390 Approved

1/24/2008 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-H-6875 Approved

1/24/2008 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT MM-5744 Approved





1/24/2008 0:00 Bodycote Thermal Processing - Vernon (3308) HT - HEAT TREAT AMS-H-81200 Approved


1/24/2008 0:00 HITEMCO (3173) CT - GRINDING, HVOF LGPS-7010 Approved Spec Added

Page (122) of (128)


Printed: 12/14/2018

1/8/2008 0:00 RBC Transport Dynamics (4312) CMSP - GRINDING, CHROME MIL-STD-866 Inactive Spec Removed

1/8/2008 0:00 RBC Transport Dynamics (4312) CMSP - GRINDING, CHROME LGPS-7000 Inactive Spec Removed

1/8/2008 0:00 RBC Transport Dynamics (4312) CMSP - GRINDING, CHROME CPC-6505 Inactive Spec Removed

1/4/2008 0:00 Orbit Industries (3243) SE - SHOT PEEN BP-105 Inactive

12/20/2007 0:00 Pacific Metallurgical Inc. (4268) HT - HEAT TREAT PS-2101 Approved

12/20/2007 0:00 Asko Processing, Inc. (3049) CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Inactive

12/20/2007 0:00 Burton Industries Inc. (4233) HT - HEAT TREAT MM-4995 Approved

12/19/2007 0:00 KANSAS PLATING INC AQS - QUALITY SYSTEM AQS Inactive

12/19/2007 0:00 KANSAS PLATING INC CP01 - COATING, DRY FILM MIL-L-46010 Inactive

12/19/2007 0:00 SURFACE TREATMENT NEDERLAND B.V (6014) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 Approved

12/12/2007 0:00 Asko Processing, Inc. (3049) CP09 - PLATING, NICKEL AMS-2424 Approved

12/11/2007 0:00 KANSAS PLATING INC DO NOT USE, use CP01 - COATING, DRY FILM instead n/a Inactive

12/11/2007 0:00 Ulrich Metrology NA - CALIBRATION ISO17025 Approved

12/4/2007 0:00 Rex Heat Treat (3749) HT - HEAT TREAT AMS-2770 Approved

10/23/2007 0:00 AeroTek Manufacturing Limited - CAD (4434) CP10 - ELECTROLESS PLATING, NICKEL AMS-2404 Not Approved Spec Removed

10/23/2007 0:00 AeroTek Manufacturing Limited - CAD (4434) CP09 - PLATING, NICKEL AMS-2424 Not Approved Spec Added

10/23/2007 0:00 CHROMAL PLATING CO. CP09 - PLATING, CHROME CPC-8207 Not Approved Spec Removed

10/23/2007 0:00 CHROMAL PLATING CO. CP09 - PLATING, CHROME CPC-8221 Not Approved Spec Removed

10/23/2007 0:00 CHROMAL PLATING CO. CP09 - PLATING, CHROME MIL-STD-1501 Not Approved Spec Removed

10/23/2007 0:00 CHROMAL PLATING CO. CP09 - PLATING, CHROME AMS-QQ-C-320 Not Approved Spec Removed

10/23/2007 0:00 CHROMAL PLATING CO. CP09 - PLATING, CHROME MM4953 TYPE 1 QNLY Not Approved Spec Removed

10/5/2007 0:00 Embee Processing, LLC. (3337) CP09 - PLATING, TIN BP-104 Superceded Spec Removed

8/28/2007 0:00 DIRAT'S LABORATORIES - remove NA - LABORATORY / TESTING A2LA Pulled Spec Removed

4/16/2007 0:00 Praxair Surface Technologies Montreal LP, St-Laurent (3539) CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-C-13924 Superceded Spec Removed

2/20/2007 0:00 Wesco Aircraft - Toronto CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 Not Approved Spec Removed

8/21/2006 0:00 Quality Steel Treating LLC (4005) WLD - BRAZING RI-325 Inactive Spec Removed

5/1/2006 0:00 Alp Aviation (7440) CP01 - COATING, PAINT APPLICATION MIL-F-18264 Approved Spec Added

8/10/2005 0:00 Poly Metal Finishing, Inc. (3705) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) AMS-2470 Approved Spec Modification

1/1/2000 0:00 Mistras Services Inc (3242) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444 Approved Spec Added

1/1/2000 0:00 Mistras Services Inc (3242) NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742 Approved Spec Added

Page (123) of (128)

UTAS Landing GearDocument 200 Approved Processors - Notes

Printed: 12/14/2018

1 Stress relief: The processor is approved for pre-plate stress relief for all applicable specifications. Any processor that is approved to perform

stress relief as a special process is approved to perform stress relief per any applicable specification.

The approved temperature range is up to the temperature noted in the Limitations field.

Any restrictions noted in the Limitations field still apply.

2 Anodize: Any approval for anodize Type I covers both Type I and Type IB.

Any approval for anodize Type II covers both Type II and Type IIB.

3 Embrittlement Relief: For processes that are potentially embrittling (i.e. plating, nital etch, etc.) that require a post-process hydrogen

embrittlement bake, processors that are approved for these processes are, by inference, approved for the hydrogen embrittlement bake.

4 Calibration and test laboratories: Calibration and test laboratory services are not included in the scope of Document 200.

Control of calibration and test laboratory services shall be a part of the supplier’s QMS as per AS9100 section 7.4.1.

5Nadcap: Special Processes that require Nadcap certification are identified on the 'Processes' tab. Processors who are limited to performing a

special process in local areas only are generally exempt from the Nadcap requirement. Exceptions are noted on the Nadcap Exceptions tab.

6 All UTAS approved Processors located in the United States and Canada working on ITAR controlled military parts, sent either directly from a

UTAS facility or from a UTAS supplier, must be registered with the US Directorate of Defense Trade Controls. If the Processor is processing

ITAR controlled military hardware for UTC Aerospace Systems, it must obtain a registration which is outlined in the ITAR (International Traffic in

Arms Regulations) 22 CFR 122 (US Export Controls).

EAR controlled military parts do NOT require the DDTC license. See the Export Ctrl tab for a listing of ITAR and EAR programs.

Column B on the Doc 200 Listing tab shows the DDTC license expiration date for the Processor.

This column must have a date that is not expired in order for ITAR controlled military product to be processed by the US

or Canadian Processor. If there is no date, UTAS has not receive evidence that the Processor is licensed, and no ITAR

controlled military hardward should be sent to the Processor for processing.Processors located outside of US and Canada are not required to have the DDCT license.

Notes

Page (124) of (128)

UTAS Landing GearDocument 200 Approved Processors - Notes

Printed: 12/14/2018

7 Paint, Local touch-up: Entities that perform only local paint touch-up do not have to be approved on Document 200, nor Nadcap approved.

Local paint touch-up is defined as: manual application with brush (or equivalent) covering less than 5% of the part's painted area up to 12

square inches maximum total touch-up area.

Page (125) of (128)

F-35 CTOL

F-35 STOVL

F-35 CV

F-15

F-18

IDF

F-22

B1

C-17

AH-64

F-16

E-2 A/B/C/D

V-22

SH-60

C2A

EA-6B

E2 Haweye

DHC-7

C-5

Military Program Export Controls

The following programs are ITAR controled and require a DDTC license

The following programs are EAR controled and do NOT require a DDTC license

SPECIAL PROCESS Process Risk Rating Nadcap Required

AQS - QUALITY SYSTEM 3 Yes, if not AS9100

CMSP - GRINDING, CHROME 10 Yes

CMSP - GRINDING, HVOF 5 Yes

CP01 - COATING, CERAMIC METALLIC (SERMETEL®) 3 Yes

CP01 - COATING, DRY FILM 3 Yes

CP01 - COATING, PAINT APPLICATION 1 Yes

CP01 - COATING, RESIN 3 Yes

CP02 - TEMPER ETCH INSPECTION 9 Yes

CP05 - CHEMICAL MILLING 3 Yes

CP07 - IVD, ALUMINUM 3 Yes

CP07 - IVD, CADMIUM 3 Yes

CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) 5 Yes

CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) 5 Yes

CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IC) 5 Yes

CP08 - ANODIZE ALUMINUM - HARD (TYPE III) 5 Yes

CP08 - ANODIZE ALUMINUM - HARD with TEFLON 3 Yes

CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) 5 Yes

CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) 5 Yes

CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric Acid 5 Yes

CP08 - ANODIZE, TITANIUM 5 Yes

CP09 - PLATING, ALUMINUM (Alumiplate®) 3 Yes

CP09 - PLATING, CADMIUM (BRIGHT/LHE) 9 Yes

CP09 - PLATING, CADMIUM-TITANIUM 9 Yes

CP09 - PLATING, CHROME 9 Yes

CP09 - PLATING, COPPER 5 Yes

CP09 - PLATING, GOLD 9 Yes

CP09 - PLATING, HARD CHROME ON ALUMINUM 9 Yes

CP09 - PLATING, NICKEL 9 Yes

CP09 - PLATING, NICKEL - Cadmium Diffused 9 Yes

CP09 - PLATING, SILVER 3 Yes

CP09 - PLATING, THIN DENSE CHROME 9 Yes

CP09 - PLATING, TIN 3 Yes

CP09 - PLATING, ZINC 9 Yes

CP09 - PLATING, ZINC NICKEL 9 Yes

CP10 - ELECTROLESS PLATING, NICKEL 9 Yes

CP11 - CONVERSION COATING, ALUMINUM 3 Yes

CP11 - CONVERSION COATING, STEEL, BLACK OXIDE 1 Yes

CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN 9 Yes

CP12 - PASSIVATION 3 Yes

CP12 - TITANIUM CLEANING 3 Yes

CP13 - PLATING, BRUSH CADMIUM 9 Yes

CP13 - PLATING, BRUSH NICKEL 9 Yes

CP13 - PLATING, BRUSH ZINC NICKEL 9 Yes

CP13 - PLATING, BRUSH, OTHER 9 Yes

CP14 - STRIPPING, HVOF 9 Yes

CP14 - STRIPPING, OTHER THAN HVOF 3 Yes

CT - HVOF 5 Yes

CT - PLASMA ARC SPRAY 5 Yes

ETG - CONFORMAL COATING, PARYLENE 3 Yes

HT - HEAT TREAT 3 Yes

HT - HOT ISOSTATIC PRESSURE 5 Yes

HT - STRESS RELIEF 9 No

NA - COATING, VACUUM IMPREGNATED CHROME 3 No

NA - INSPECTION, ROLLSCAN 1 No

NA - ROLLER BURNISHING 3 No

NA - SWAGING (CONTROLLED DEFORMATION) 9 No

NDT - INSPECTION, LIQUID PENETRANT 5 Yes

NDT - INSPECTION, MAGNETIC PARTICLE 5 Yes

NDT - INSPECTION, RADIOGRAPHIC 5 Yes

NDT - INSPECTION, ULTRASONIC 5 Yes

NM - EDM (Electro Discharge Machining) 5 Yes

SE - ROTOPEEN 5 No

SE - SHOT PEEN 5 Yes

WLD - BRAZING 5 Yes

WLD - WELDING 5 Yes

Exceptions to UTAS LG Nadcap Accreditation MandateExceptions to UTAS LS Nadcap Accreditation Mandate

AQS AEROSPACE QUALITY SYSTEM:

Not required when supplier has AS9100 or AS9110 third-party registration.

Note: suppliers without third party recognition of their QMS will need to be audited by UTAS LS

as compliant to AS9003.

CP CHEMICAL PROCESS Technology for:

Brush cadmium and/or brush nickel plating when the supplier has no other chemical processes

that require Nadcap approval.

Local chemical conversion (alodine) when the supplier has no other chemical processes that

require Nadcap approval.

Local paint touch-up, defined as: manual application with brush (or equivalent) covering less

than 5% of the part's painted area up to 12 square inches maximum total touch-up area.

Etch inspection for hardening / re-tempering burns when the method is local swab only, and

the supplier has no other Chemical processes or NDT processes that require Nadcap approval.

Note:

Pre-penetrant Etch in conjunction with a NDT accreditation.

Pre-cleaning for weld preparation.

Clarification: a NDT or Weld audit shall include a review of the adequacy of the pre-penetrant

etch or cleaning in conjunction with that special process audit, if the facility has that capability.

CT COATING

Vacuum impregnation of chrome plate.

HT HEAT TREATMENT Technology for:

Stress Relief

Hydrogen Embrittlement Relief

(Clarification: a Chemical Process or Weld audit shall include a review of the adequacy of the

Embrittlement Relief or Stress Relief in conjunction with that special process audit, if the facility

has that capability)

SE SURFACE ENHANCEMENT for:

Self contained rotary (flapper) peen when the supplier has no other surface enhancement

processes that require Nadcap approval.

Manual and/or portable shot peening when used for repair/rework only.

Roller burnishing for beneficial compressive stress

CMSP CONVENTIONAL MACHINING as a SPECIAL PROCESS for:

Grinding of chrome plate on high strength steel is mandated to be Nadcap CMSP certified by

December 31, 2015.

Grinding of HVOF on high strength steel is mandated to be either Nadcap CMSP certified or

Nadcap CT AC7109/8 certified by December 31, 2015

MRO Where the Processor/Process/Specification is identified as limited to MRO only, no Nadcap

certification is required.

THESE EXCEPTIONS ARE SUBJECT TO CHANGE