Screw Conveyor & Belt Conveyor Screw Conveyor, Flexible Screw Conveyor, Belt Conveyor, Dust Collector, Industrial Belt Conveyor, Fly

Ash Belt Conveyor

Screw conveyor Spiral conveyor adapt international standard products. It has advanced technical data, new designed

structure, better sealing, stronger abrasive resistance, lower resistance, lasts longer. Spiral conveyor is

used for deliver goods in powder, grainy and lumpy shapes. It is widely used in the industrial department.

Flexible Screw Conveyor PNEUCON flexible screw conveyor, also known as a spiral conveyor, screw conveyor, helix conveyor or

center less auger conveyor, consists of a spring steel or stainless steel, flexible screw that is enclosed in a

flexible or rigid plastic tube, or a rigid steel tube, and driven by an electric motor normally located at the

discharge end of the conveyor. This simple design delivers efficient performance and high reliability

while reducing maintenance and cost. When properly engineered according to the specific characteristics

of the material being conveyed and the process into which it will be integrated, a flexible screw conveyor

can outperform rigid screw conveyors, bucket elevators, drag chain conveyors, aero mechanical

conveyors and other equipment intended to transport powder and bulk solid materials.

The intake end of a flexible screw conveyor tube is typically equipped with a charging adapter a U-

shaped trough that connects to the outlet of a hopper or directly to the outlet of process equipment such as

a bulk bag discharger, bag dump station, and grinder, crusher, screener, blender, reactor or storage vessel

of any kind.

The flexible screw passes through the charging adapter trough, exposing a section of the screw to material

flowing into the trough from above. When rotating, the exposed section of screw feeds material into the

outer tube, where it is then propelled through the tube by the enclosed portion of the screw.

A phenomenon resulting from the loose fit of a rotating flexible screw within a tube filled with bulk

material is that the screw automatically self-centers within the tube, providing clearance between the

screw and tube wall. This affords sufficient space for particles to flow without damage, depending on the

fragility and size of particles being conveyed.

A removable clean-out cap covers the intake end of the conveyor tube, permitting rapid emptying and

flushing of the tube, as well as disassembly and wash-down of components. Because the intake end of the

screw requires no bearing, and since the discharge end is coupled to the motor drive above and/or beyond

the point at which material exits the discharge spout, material does not come in contact with seals or

bearings. The flexible screw is therefore the only moving part contacting material.

Industrial Belt Conveyor The Industrial Belt Conveyor is mainly of two kinds. One which is used for handling general material like

the moving boxes inside the factories, and the other which is used for transporting not just industrial but

agricultural materials as well, like grain, ores, coal, and others. This belt conveyor is useful for both

indoor and outdoor purposes. These belts seek to save lot of time, money and even physical labor. It is not

just economical but also low in maintenance.

Belt conveyor

The Belt Conveyor is designed and installed in such a way so as to meet the bulk material handling and

transferring needs. The Conveyor not just saves time and money but also saves a lot of physical labor

when it comes to transferring of and handling of bulk materials like food products, fertilizers, cement,

cement mixtures and so on. It generally consists of two or more pulleys and a continuous loop, which is

the conveyor belt to rotate above them. It seeks to use a wide belt and the pulleys supported by the rollers

or even a flat pan along its way.

We can design and install Belt Conveyor Systems to meet all of your material handling needs. Below are

some examples of the various types of Belt Conveyors we specialize in. We also Provide Stackers and

Portable Conveyors as well as accessories such as Belt Scales, Metal Detectors and Conveyor Switches.

Information is provided on portable and stacker conveyors below, however if you need information on a

custom systems please contact us via your preferred method or visit our website http://www.pneucon.net/