doc.dtr2000 version n/b · congratulations on choosing the philips dtr 320 digital terrestrial...

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glish

Welcome to digital television

Congratulations on choosing the PHILIPS DTR 320 digital terrestrial receiver, which will allow you toaccess Freeview digital terrestrial television, radio and interactive channels.

With this product, you can enjoy advanced functions and features including:- Award-winning noise-free reception- Automatic programme installation- Wide screen format- TV SCART and VCR/DVD SCART connectors- Personal channel list and favourite lists- Electronic Programme Guide

PHILIPS have made every effort to ensure this product meets your every day needs for years tocome.This User Manual covers the installation of your receiver, together with explanations of the standardand unique features of the product.

Lucas CoversParis, March 2005

Meaning of symbols

2 WELCOME TO DIGITAL TELEVISION

Important information:Must be read and understood.

The “crossed-out wheeled bin” means separate disposal is required for thereceiver, accessories and used batteries.They mustn’t be disposed of withyour household waste.Please, inquire about the local regulations.For information: the PHILIPS batteries supplied with your receiver remotedo not contain hazardous substances such as Mercury, Cadmium, or Lead.

The “Material recyclability symbol” printed on the cardboard packagingand user manual means these parts are recyclable.

The “Material recyclability symbol” affixed to the plastic packaging partsmeans these parts are recyclable.

The “Green Dot” affixed on cardboard means PHILIPS pays a financialduty to the “Avoidance and Recovery of Packaging Waste” organization.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

Unpacking

Unpack your receiver and check that the following cables and accessories are also included in thepackage:- 1 remote control- 2 batteries (2 x LR6 AA 1.5 V)- 1 SCART lead- 1 RF coaxial lead- 1 mains cord- 1 user manual- 1 Worldwide Warranty booklet

Plastic bags can be dangerous.To avoid suffocation keep the bags away from babies andchildren.

Quick installationPlease read the safety section before connecting your receiver.

Requirements for a fast and successful first installation are as follows:• You already have an aerial.• Your aerial is correctly pointed at the terrestrial transmitter corresponding to your area.• Your TV set is switched on.• Your digital receiver connection is according to the diagram below.

QUICK INSTALLATION 3

to AC outlet

TV set

VCR/DVD

ANT IN

ANT OUT

EXT 1

EXT 2EXT 1EXT 2

For optimum configuration

RF Cable

Terrestrial Receiver

6

Batteries can easily beremoved using common

household tools(screwdriver, etc.).

NOTICE DTR 320_290405.qxd 29/04/05 14:07

4 TABLE OF CONTENTS

En

glish

Welcome to digital television 2

Meaning of symbols 2

Unpacking 3

Quick installation 3

Table of contents 4

Important safety instructions 5

1 Product description 7

1.1 Front view 7

1.2 Rear view 8

1.3 Using the remote control 9

2 Connecting your digital receiver 10

2.1 Connecting to a TV and a VCR bothfitted with one SCART socket 10

2.2 Connecting to your HiFi/Audio receiver equipment (Analogue/Digital) 12

3 First installation 13

3.1 Channel scan 13

3.2 Scanning failure 13

3.3 Repeated scanning failure 13

4 Day to day operation 14

4.1 Switching your receiver ON/OFF(standby) 14

4.2 Selecting TV/Radio mode 14

4.3 Changing channels when watchingdigital TV or listening to digital radio 14

4.4 Channel banner 15

4.5 Volume control - / + / 15

4.6 Changing the Subtitle selection 15

4.7 Changing the Audio language selection 15

4.8 Electronic Programme Guide 16

4.9 Timers 16

4.10 DIGITAL TEXT - MHEG interactive television 16

4.11 Using the TV / STB button 16

4.12 Watching locked channels 16

5 Changing the settings of your receiver 16

5.1 General information 16

5.2 Preferences 16

5.3 Installation 20

5.4 Information 22

5.5 Timers 23

5.6 Favourites 24

5.7 Access Restrictions 25

6 Menu tree 26

7 Advanced settings 27

7.1 Changing the remote control setting 27

7.2 More about recording 27

8 Troubleshooting guide 29

9 Technical specifications 31

TABLE OF CONTENTS

NOTICE DTR 320_290405.qxd 29/04/05 14:07

Important safety instructions

For safe operation and optimal lifetime

Your receiver has been manufactured to meet the appropriate safety standards, but theinstructions below must be followed to operate it safely.These instructions must be keptfor future reference.

- Before connecting the receiver to the mains, check that the mains supply voltage corresponds tothe voltage printed on the rear of the receiver. If the mains voltage is different, consult your dealer.

- The receiver does not contain any user-serviceable parts.All maintenance work must be carriedout by qualified personnel.

- If you disconnect the receiver from the mains, make sure you unplug it from the wall socket andnot just from the AC socket at the back of the unit. Children could seriously injure themselves, asthe free end of the cable is still alive.

- Unplug the receiver during lightning storms.- To prevent fire or shock hazard, do not expose this equipment to rain or moisture.- The receiver should be placed on a firm surface, and the ventilation openings must not be covered

with items, such as newspapers, table cloths, curtains, etc.- Do not install the receiver near any heat sources such as radiators, stoves or other apparatus that

produce heat. Protect it from direct sunlight.- When installing the receiver, ensure there is a gap of approximately 2.5 cm around the receiver to

enable air to circulate freely and prevent overheating.- Ensure accessibility is maintained to the mains connector at the back of the unit in case

emergency shutdown is required.- Do not place any combustible objects on the receiver (candles, etc.).- No objects filled with liquids, such as vases, shall be placed on the unit.The receiver shall not be

exposed to dripping or splashing. Should this happen, disconnect your receiver from the mains andconsult your dealer.

- Make sure that children do not place any foreign objects in any of the openings.- For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth or aerosol cleaners.

En

glis

h

IMPORTANT SAFETY INSTRUCTIONS 5

NOTICE DTR 320_290405.qxd 29/04/05 14:07

6 IMPORTANT SAFETY INSTRUCTIONS

En

glish

Mains connection

Important note

This apparatus is fitted with an approved moulded BS1363 plug.To change a fuse in this type of plug proceed as follows:- Remove fuse cover and fuse.- Fit a new fuse that should be a BS1362 ASTA approved type.- Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plugfitted in its place. If the mains plug contains a fuse, this should have a value of 3A.If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.

Note: the severed plug must be destroyed to avoid a possible shock hazard, should it be inserted into anappropriate socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the following code:• BLUE - “NEUTRAL” (“N”)• BROWN - “LIVE” (“L”)

- The BLUE wire must be connected to the terminal, which is marked with the letter “N” orcoloured BLACK.

- The BROWN wire must be connected to the terminal, which is marked with the letter “L” orcoloured RED.

- Do not connect either wires to the earth terminal in the plug that is marked by the letter “E” orby the safety earth symbol or coloured green or green-and-yellow. Before replacing the plug cover,make certain that the cord grip is clamped over the sheath of the lead - not simply over the twowires.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

PRODUCT DESCRIPTION 7

1 Product description

1.1 Front view

1 STANDBY button: . . . . . . . . . . . . . . . . . . . . . . . . Switch the receiver ON or to standby.

2 LED1 (Red): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display receiver status (see status indicator table).

3 LED2 (Red/Green/Orange): . . . . . . . . . . . . . . Display receiver status (see status indicator table).

4 Remote control receiver window

Status indicator table

Note: if the red LED is blinking while your receiver is in “Standby”, it indicates that an upgrade of your receiversoftware is taking place. Do not interrupt this operation.

LED LED1 LED2Mode (Red) (Red/Green/Orange)

Receiver in Standby OFF red

Watching TV OFF green

Listening to the radio OFF green, blinkingorange every 20 s

Pressing a remote control button OFF blinking, colour dependingon current mode

Timer active ON green

Timer active in Standby ON red

Software download blinking Depending on current mode

Q W E R

NOTICE DTR 320_290405.qxd 29/04/05 14:07

8 PRODUCT DESCRIPTION

En

glish

1.2 Rear view

1 AERIAL IN (*): . . . . . . . . . . . . . . . . . . . . . . . . . . Input to connect your UHF aerial.

2 RF OUT (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF output to be connected to the aerial input of yourvideo recorder or TV set, refer to chapter 2 forrecommended connection diagrams.

3 TV(*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCART (1) socket to connect your TV set or a videoprojector.

4 SERIAL (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232 socket for serial data transfer during servicing.

5 VCR (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCART (1) socket to connect your video recorder.

6 LAN: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Currently idle. For future use.

7 L/R AUDIO OUT (*): . . . . . . . . . . . . . . . . . . . Left/Right analogue audio-cinch outputs to connect yourHiFi/audio receiver system.

8 DIGITAL (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digital audio-cinch output to connect your HiFi/audioreceiver system.

9 230V~50Hz 6W max (**): . . . . . . . . . . . . Socket to connect the mains cord.

The label showing the type and serial number is underneath the receiver.

(1) SCART is also called Euroconnector or Peritel.

* Safety Extra Low Voltage** Hazardous Voltage

W OTQ E R U IY

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

PRODUCT DESCRIPTION 9

1.3 Using the remote control

Standby Switches your receiver into thestandby mode.

VOLUME +/-Increases/Decreases the volumelevel

RED, GREEN,YELLOW, BLUEAction depending on contextBlue button used to exit mostsub-menus

TV/STBToggles between digital TV fromyour receiver and standardanalogue TV from your TV set

1-11Displays available audio languages

P+ / P-- Next/Previous channel in

digital TV/Radio mode- Page up/down in service lists

TEXTLaunches digital text whenavailableSUBTITLE Displays available subtitlelanguages

FAVDisplays available favourite lists

RADIOToggles between TV and Radiomode

0-9 number keys- In viewing mode: selects

channels- In menu: directly selects a

menu item or sets a setting- In standby: wakes up the

receiver

INFO- Opens the info banner- Then shows extended

program information- Then closes the banner

EXITCurrently inactive. For future use.

MUTE Audio mute

EPGOpens/Closes the ElectronicProgramme Guide

BACK- In viewing mode: returns to

the previously tuned channel- In menu mode: returns to the

previous screen.

CURSOR t/y- Previous/Next channel- Scrolls up/down in menu/lists

CURSOR i- Scrolls right- Opens one menu level down

in menu mode

CURSOR u- Scrolls left- Opens the previous menu

level, or store values

OK- Displays channel list- Selects service from channel

list or EPG- Confirms and activates a

menu selection

MENUOpens/Closes the Menu

RECOpens Timer list/Creates timersNote: the sequence “TIMER, 0”deletes the current active timer

NOTICE DTR 320_290405.qxd 29/04/05 14:07

10 CONNECTING YOUR DIGITAL RECEIVER

En

glish

2 Connecting your digital receiver

There are several ways you can connect and incorporate your digital receiver into your existingaudio/video equipment set up.

Warning!

Before starting to connect:- Unplug all equipment (TV set,VCR and/or DVD, etc.) from the mains.- Do not connect your digital receiver to the mains supply now.- Check your current wiring: you may not need to modify your existing Audio / Video set up

connections if they already match the connection diagrams below.- Depending on your exiting set up, choose the best suited connection method for incorporating

your digital receiver into your existing Audio / Video set up. Please read chapters 2.1 and 2.2.

Note: when adding new equipment, be sure to refer to the related installation instructions of the relevantmanual.

2.1 Connecting to a TV and a VCR both fitted with one SCARTsocket

Incorporate your receiver in your existing installation as shown on the diagrams or follow theinstructions below.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

CONNECTING YOUR DIGITAL RECEIVER 11

- Plug your aerial lead plug into the “AERIAL IN” socket of your digital receiver.- Connect the “RF OUT” socket of your digital receiver to the “ANT IN” socket of your VCR by

means of the RF coaxial lead supplied with your digital receiver.- Connect the “ANT OUT” socket of your VCR to the aerial input socket of your TV by means of a

RF coaxial lead.- Connect the “TV” SCART socket of your digital receiver to the “EXT1” SCART socket of your TV

by means of the SCART lead supplied with your digital receiver.- Connect the “VCR” SCART socket of your digital receiver to the “EXT1” SCART socket of your

VCR by means of a SCART lead.Alternatively, if your VCR supports the Easy Record feature,connect the “VCR” SCART socket of your digital receiver to the “EXT2” SCART socket of yourVCR as shown on the second diagram.

- Plug all your equipment, excluding your digital receiver, into the mains.- Switch on your TV and select a channel.- Plug your digital receiver into the mains.Your digital receiver will display the SETUP screen (the

green LED will be illuminated).- Proceed to chapter 3 to continue with the channel scan of your digital receiver.

Note:

1. With either connection set up you can:- Watch digital TV while you record analogue TV.- Watch analogue TV while you record digital TV.- Record the digital TV channel you are watching.- Watch Play Back from your VCR.

2. With the second connection set up, you can use the Record Link feature provided your VCR supports it.

to AC outlet

TV set

VCR/DVD

ANT IN

ANT OUT

EXT 1

EXT 2EXT 1EXT 2

For optimum configuration

RF Cable


6

NOTICE DTR 320_290405.qxd 29/04/05 14:07

12 CONNECTING YOUR DIGITAL RECEIVER

En

glish

2.2 Connecting to your HiFi/Audio receiver equipment(Analogue/Digital)

Depending on your HiFi / Audio receiver equipment, you might have several options to connect yourdigital receiver.

Analogue connection (a)Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audioequipment by means of a double CINCH cable (not supplied). Consult the user manual of yourHiFi/Audio receiver equipment to choose the proper analogue audio inputs.

Note:With this connection set up you can control the audio volume up/down and mute with the remotecontrol of your digital receiver or with your HiFi's remote control.

Digital connection (B)Connect the audio “DIGITAL” output socket to the relevant digital audio input socket of your audioequipment by means of a single CINCH cable (not supplied). Consult the user manual of yourHiFi/Audio receiver equipment to choose the proper digital audio input.

Note:With this connection set up you can only control the audio volume up/down and mute with your HiFi / Audio Receiver remote control, refer to the relevant user manual.

A B

L R

AUDIO

Digitalinput

Analogueinput

Audio equipment

to AC outlet


6

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

FIRST INSTALLATION 13

Requirements for a fast and successful firstinstallation are as follows:

• You already have an aerial.• Your aerial is correctly pointed at the

terrestrial transmitter corresponding toyour area (1).

• Your digital receiver connection isaccording to the diagrams depicted inchapter 2.1 or 2.2.

• Your TV set is switched on.

3.1 Channel scan

- Connect your receiver to the mains.TheSetup screen appears.The selection is onService scan.

- Press <OK> to start scanning for channels.The following information is reported onscreen:

• scanning progress,• number of channels found.

When scanning has been successfullycompleted, a completion message is displayed.- Press <OK>. A warning message is displayed.- Press <OK> again to start watching TV.To know more about using your digital receiverconsult chapter 4.

If scanning has failed, proceed to chapter 3.2.

3.2 Scanning failure

No channels could be found. A scan failuremessage is displayed.

Before starting a new scanIt is recommended you perform the followingchecks:- connections to your receiver (see chapter 2),- signal quality (see paragraph 5.3.3),- antenna installation,- channel(s) available in the region

corresponding to your area (1).The scan failure message is displayed.- Press <OK> to exit this screen and access

the main menu.- Proceed with installation as described in

paragraph 5.3.2.

Note: if the same failure message appears after awhile, refer to chapter 8.

(1) To check whether you can receive digitaltelevision in your region, consult the website WWW.FREEVIEW.CO.UK: type in yourpostcode and click on <GO> to see thecoverage for your area.

3.3 Repeated scanning failure

No channels could be found, even afterchecking the signal quality delivered by youraerial.Either your aerial is not pointing properly atthe digital TV transmitter, or your aerialinstallation needs to be upgraded, or you arenot in the coverage area to correctly receivedigital television. Please refer to theTroubleshooting guide at the end of this usermanual.For a proper diagnosis, call your electricalretailer.

3 First installation

NOTICE DTR 320_290405.qxd 29/04/05 14:07

14 DAY TO DAY OPERATION

En

glish

4.1 Switching your receiverON/OFF (standby)

To wake up your receiver from standby mode,press <P+>, <P->, <BACK>, or any numberbutton of the remote control. Alternatively,press the <Standby> button on the front panelof the receiver.To put your receiver in standby, press theremote control standby button. Alternatively,press the <Standby> button on the front panelof the receiver.

Note: pressing and holding the <Standby> buttonon the front panel of the receiver for morethan 4 seconds will reset your receiver.

Your receiver, as any electronicequipment, consumes power. In orderto reduce power consumption, pleaseswitch your receiver to standbywhenever you are not using it. If youare not using your receiver for a longperiod of time we recommend youswitch it off by unplugging it from themains.This will maximize energy savingand help protect the environment.

4.2 Selecting TV/Radio mode

To switch your receiver from TV to RADIO modeand vice versa, press the <TV/RADIO> button.

4.3 Changing channels whenwatching digital TV orlistening to digital radio

4.3.1 Using number buttons

- Press the number button(s) to select thedesired channel number.

4.3.2 Using <P+>/<P->

- Press <P+>/<P-> to select the next/previouschannel in the list.

4.3.3 Using <BACK> (last channel recall)

- Press the <BACK> button to return to thepreviously selected channel.

4.3.4 Using the channel list

- Press the <OK>button to open thechannel list.

- Press the t or ybutton to move to the desired channel.

- Press <OK> to exitthe list and view theselected channel.

4.3.5 Using your favourite lists

- Press the <FAV>button to open the listof all available channellists.

- Press the t or y tomove to the desiredlist.

- Press the <OK>button to make the listactive and tune yourreceiver to the channelthat was tuned whenthe list was last activated.

Note: empty favourite lists are not displayed.

4 Day to day operation

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

4.4 Channel banner

Each time you select a new channel, a bannerappears at the top of the screen.This banner indicates:

• the current channel number and name,• the start and end time of the current

programme,• the current programme name,• the icons for the current programme

properties,• the current time,• the time left before the next programme

starts.

- Press the u or ibutton to change from the“NOW” programme to the “NEXT”programme view.

- Press the y or t button to displayinformation on the current programme ofthe next or previous channel.

- Press <INFO> to display extendedinformation on the current selection.

Alternatively:Press <INFO> once to display the channelbanner at any time.

Then press <INFO> again to display extendedinformation.Then press <INFO> again to close the channelbanner.

4.5 Volume control- / + /

You are watching digital TV or listening to adigital radio programme:- Press < -> to decrease volume.- Press < +> to increase volume.- Press < > to mute the sound, and press

< > again to de-mute the sound.

Note: change of volume is signalled with a bargraph, while audio mute is signalled with anicon on the top right corner of the screen.The mute icon is displayed for 5 minutes only.

4.6 Changing the Subtitleselection

- Press the < > button.- Press the y or t to

move to the desiredsubtitle language.

- Press <OK> to confirmyour selection.Alternatively, select Noneto disable subtitling.

4.7 Changing the Audio languageselection

- Press the <I/II> button.- Press the y or t to

move to the desired audiolanguage.

- Press <OK> to confirmyour selection.

icon description

MHEG application available

Information available

Subtitles available

Alternate audio languages available

Low battery

Favourite list

AC3 audio available

Maturity rating

DAY TO DAY OPERATION 15

NOTICE DTR 320_290405.qxd 29/04/05 14:07

16 DAY TO DAY OPERATION

En

glish

4.8 Electronic Programme Guide

You are watching digital TV or listening to adigital radio programme:- Press the <GUIDE> button to open the

programme guide.The current programmelist (called “Now/Next”) appears.

- Press the ibutton to consult the currentday programme list.

- Press the t or y to move to the wantedchannel.

- Press the <OK> button to select thechannel.

4.9 Timers

4.9.1 Setting a timer when watchingdigital TV

- Press the <TIMER> button to access thetimer list.

- Then proceed as described in paragraph5.5.1.

4.9.2 Set a timer from the Guide

- Scroll to the programme for which you wantto set a timer.

- Press the red colour button or the<TIMER> button to set a timer.The timerscreen is displayed.

- Modify the timer settings as appropriate. Forinstance, to set a reminder, select Remind asType of timer (default is Record).

- Press the red colour button again to storethe timer and return to the Guide.

4.9.3 Deleting an active timer

A timer is active and you are watching whatyou are recording. Recording is signaled byLED1 lit in red and LED2 lit in green.- Press key sequence “TIMER, 0” to delete the

active timer.A timer is active and your receiver is instandby. Recording is signaled by LED1 lit inred and LED2 lit in red.- Press key sequence “TIMER, 0” to delete the

active timer.

4.10 DIGITAL TEXT - MHEG interactive television

- Depending on the application, press eitherthe <TEXT> button (White colour button)or the red colour button to enable digitalteletext. Note that not all channels transmitinteractive television applications at all times.

Note: programmes carrying interactive television are

signalled by the “ ” icon in the banner.Thisicon may be displayed although there is noMHEG available at the time.

4.11 Using the TV / STB button

To switch your receiver from digital TV orRADIO to standard analogue channels on yourTV and vice versa, press the <TV/STB> button.

4.12 Watching locked channels

If you have selected a locked channel, you mustunlock this channel to watch it.When prompted to enter your PIN code:- Enter your 4-digit PIN code (default is 1234).

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

CHANGING THE SETTINGS OF YOUR RECEIVER 17

You can change the receiver settings to adaptthe receiver to your aerial conditions,Audio/Video set up or other preferences.

5.1 General information

5.1.1 Basic menu navigation

- When watching digital or listening to digitalradio, press <MENU> to display the MainMenu, including the Puck.

The Puck is always present when the menu isdisplayed.The Puck includes 5 elements:

• the yellow ball indicating the currentposition;

• the t, y, u and igreen cursors,indicating possible navigation directions.

Note: the Puck cursors are transferred to the right-hand side of the menu window for theadjustment of the settings.The up, down, rightand left cursors appear only if it is possible tomove in that direction.

- Press <MENU> to exit any menu screen.

5.1.2 Changing a setting

The selection is on the first item of the menu.- Press the t or y button to scroll up/down

to select on the wanted menu item.- Press the ibutton to display the sub-items

corresponding to the highlighted item.Repeat this step as many times as necessaryto access the desired option.

Note: press <BACK> to go back one level in themenu.

- Then use the t or y button to move tothe desired setting, or enter a value using thenumber buttons.

- Press <OK> to confirm if necessary.Theselection is brought back one level in themenu.

Notes:

1. To open a menu item signalled by a lock, youmust enter your PIN code.

2. To avoid burning your TV screen on-screenmessages/menus are automatically turned offafter 20 min.

5.2 Preferences

- Press the <MENU> button to open the mainmenu.

- Press the y button to move the selectiononto Preferences.

- Press the ibutton to access the Preferencessub-menu.

5.2.1 Language

Language is selected in the Preferences sub-menu.This item is used to select your receiverlanguage settings, including the menu and audiolanguages.- Press the ibutton to access the language

settings.

5 Changing the settings of your receiver

NOTICE DTR 320_290405.qxd 29/04/05 14:07

18 CHANGING THE SETTINGS OF YOUR RECEIVER

En

glish

- Scroll to the setting you want to change.The corresponding values are displayed onthe right-hand side of the screen.

- Press the ibutton to access the settings.

5.2.2 Location

Location is selected in the Preferences sub-menu.This item is used to select the countrywhere you operate your receiver andcorresponding time zone.- Press the ibutton to access the location

settings.- Scroll to the setting you want to change.The

corresponding values are displayed on theright-hand side of the screen.

- Press the ibutton to access the settings.

5.2.3 System settings

System settings is selected in the Preferencessub-menu.- Press the ibutton to access the system

settings.

Note: if the parental control is active, you mustenter your PIN code to access the relevantsub-items of this menu.

5.2.3.1 TVThis item is used to select the format of theoutput signal for the TV and VCR SCARTsockets.- Scroll to the setting you want to change.

The corresponding values are displayed onthe right-hand side of the screen.

- Press the ibutton to access the availablevalues:

• Video Output: RGB, CVBS-PAL, or Y/C.RGB is the default and recommendedsetting.

• Audio Output: Stereo or Mono• Screen format: select the aspect ratio of

the video output that best suits your TV.

Note: it is recommended to use the RGB setting toget the best video quality on the TV screen.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h


5.2.3.2 VCRThis item is used to select the format of theoutput signal for the VCR SCART socket.- Scroll to the setting you want to change.

The corresponding values are displayed on theright-hand side of the screen.- Press the ibutton to access the available

values:• Video Output: CVBS-PAL, or Y/C. CVBS-

PAL is the default and recommendedsetting.

• Easy Record: select the control methodthat suits your VCR. Refer to your VCRuser manual.

5.2.3.3 Digital audio outputSelect AC3 (digital audio 5.1) only if yourreceiver is connected to a Dolby Digital homeentertainment system. For recordings,AC3 willbe switched off automatically.

5.2.3.4 Channel BannerThis item is used to select the channel bannerdisplay duration and transparency.- Scroll to the setting you want to change.

The corresponding values are displayed onthe right-hand side of the screen.

- Press the ibutton to access the availablevalues.

5.2.3.5 VolumeThis item is used to select the volume level atstart-up.- Press the ibutton to change the level

setting.- Press t or y to modify the volume level.- Press <OK> to confirm.

5.2.3.6 Remote ControlThis item is used to set the remote controladdress.- Press the ibutton to access the available

values.- Move to the address you want to select.

Default address is 039.- Press <OK> to confirm your selection.- Proceed as described in paragraph 7.1.

If you do not complete the procedureas described in paragraph 7.1, you willnot be able to control your receiverusing your remote control.

NOTICE DTR 320_290405.qxd 29/04/05 14:07


En

glish

5.3 Installation

- Press the <MENU> button to open the mainmenu.

- Press the y button to select Installation.- Press the ibutton to access the Installation

sub-menu.

5.3.1 Service listsThis item is used to manage your service lists.- Press the ibutton to access the service list

features.

5.3.1.1 Rearrange servicesThis feature is used to install/uninstall servicesand move services within the installed serviceslist.- First scroll to the service you want to

uninstall/install/move.- Press <OK> to select the service.

The service name appears in the Selectedservice zone.

To uninstall a service you have selectedfrom the installed services list:- Press the red colour button.The service is

removed from the installed service list andappears in the uninstalled services list.

To install a service you have selectedfrom the uninstalled services list:- Scroll to the position where you want to

install the service.- Press the green colour button.The service is

removed from the uninstalled service list andappears in the installed services list.

To move the service you have selectedwithin the list:- Scroll to the position you want to move the

service to.- Press <OK> to confirm.

5.3.1.2 View new TV channels- This feature is used to view the new

channels found while your receiver is instandby.

- Press ito view new channels found in theright-hand side of the screen.

- Scroll to the channel you want to view.Theselected channels current programme isdisplayed.

Note: press <OK> to uninstall the selectedchannel. Press <OK> again to canceluninstallation.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h


- Press u to exit the screen and return to theService lists sub-menu, or press the bluecolour button to exit the menu.

5.3.1.3 Listen to new Radio stations- This feature is used to listen to the new

radio stations found while your receiver is instandby.

- Press ito listen to new channels found.- Scroll to the station you want to listen to.

Note: press <OK> to uninstall the selectedstation. Press <OK> again to canceluninstallation.

- Press u to exit the screen and return to theService lists sub-menu, or press the bluecolour button to exit the menu.

5.3.2 Service setup

This item is used to install services.

5.3.2.1 Add new servicesThis feature is used to install new availableservices.- Press ito enable the installation feature.- Press <OK> to start searching for new

services.

Note: to interrupt the search, press <OK>. Noservices are stored.

Once the search has been completed, the totalnumber of services found is displayed on theright hand side of the screen.The Puck movesto the Store button.- Press <OK> to store the new services.- Alternatively, scroll down to the Discard button

and press <OK> to discard the new services.

Note: before storing/discarding the services found,you may view the search results forTV/radio channels and other services byscrolling up to the respective item.

- Press u to exit the screen and return to theService setup sub-menu, or press the bluecolour button to exit the menu.

5.3.2.2 Reinstall all servicesThis feature is used to reinstall all services,overwriting the previous service settings.- Press ito enable the reinstallation feature.

You are then prompted to confirm you wantto reinstall all services.

- Press <OK>, and then proceed as describedabove.

NOTICE DTR 320_290405.qxd 29/04/05 14:07


En

glish

5.3.3 Test reception

This feature is used to help you position yourantenna and check the availability of signals onspecific RF channels.The selection is on RF channel.- Press ito access the list of RF channels.

Default selection corresponds to the currentchannel.

- Scroll up or down the list to the RF channelyou want to select.

- Press <OK> to view the signal quality andstrength for the selected channel.

- If need be, move your antenna to obtain anadequate signal.When the signal is goodenough, the name of the correspondingnetwork is displayed.

- Press iagain to return to the list of availableRF channels and proceed as described aboveto check the signal quality and strength foranother RF channel.

Note: if you cannot obtain an adequate signal,refer to the troubleshooting guide.

To add specific channels:- Select a specific RF channel as described

above.- Scroll down to Add new services from RF

channel.- Press i, and then press <OK> to launch a

scan for the RF channel you selected.- Press <OK> to store the channels found.- Press u to exit the screen and return to the

Service lists sub-menu, or press the bluecolour button to exit the menu.

5.3.4 Restore factory settings

To restore the receiver factory settings:- Press <OK>.You are then prompted to

enter your master PIN code.- Enter the master PIN code. For more

information on the master PIN code, referto the troubleshooting guide.

Note: when restoring the factory settings, you loseall your personal settings.

5.4 Information

- Press the ibutton to access the Systemsoftware sub-menu.

System softwareThis item is used to manage software updates,which are necessary to keep your receiver up-to-date with the developments in digitaltelevision and make new features available.Updates are part of normal transmissions.Your receiver is originally set up toautomatically accept software updates(recommended). If you want to be promptedeach time new software is available, follow theinstructions below.- Press the ibutton to access the System

software settings.The current hardware/software version isdisplayed, and the selection is on Always acceptnew software.- Move the Puck to No if you want to be

prompted when new software is available.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h


- Press <OK> to confirm.- Press u to exit the screen and return to the

System software item, or press the bluecolour button to exit the menu.

Note: to carry out the update when new softwareis available, simply follow the on-screeninstructions.

5.5 Timers

- Press the ibutton to access the Timers sub-menu.

5.5.1 Record/Remind

This item is used to set and edit recordingtimers and reminders.- Press <OK> to access the timer list.

To set a new timer:Press the green colour button to access thetimer settings.- Scroll to the setting you want to change.

- Press the ibutton to access the settingvalues:

• Type of timer• Service• Enter your pin code if locked: a PIN code

is required when channels to be recordedare locked (move Parental Control fromOn to Off to enable recording of theselected channel).

• Day & Month, Start time, End time• Audio language, Subtitle language,

Subtitles for hearing impaired• Occurrence: Once, Daily,Weekly

- Press the red colour button to store thetimer.The timer list is displayed, including thenew timer.

- Press the yellow colour button to exit thescreen and return to the Timers sub-menu,or press the blue colour button to exit themenu.

To edit an existing timer:- Scroll within the timer list to the timer you

want to modify.- Press the ibutton to access the setting values.- Modify the setting values as appropriate (see

above for details).- Press the red colour button to store the timer.A message appears, prompting you toprogramme your VCR.- Press <OK> to proceed.The timer list is

displayed, including the modified timer.- Press the yellow colour button to exit the

screen and return to the Timers sub-menu,or press the blue colour button to exit themenu.

To delete an existing timer:- Scroll to the timer you want to delete.- Press the red colour button to delete the

timer.The timer is removed from the list.

Note: deletion is immediate!

- Press the yellow colour button to exit thescreen and return to the Timers sub-menu,or press the blue colour button to exit themenu.

NOTICE DTR 320_290405.qxd 29/04/05 14:07


En

glish

Note: when a recording timer is active, you cannotzap through digital channels, but you canswitch to analogue TV using the <TV/STB>button and zap through analogue channels.

To cancel an active timer:Refer to paragraph 4.9.3.

5.5.2 Sleep

This item is used to set sleep timers.- Press the i button to access the sleep

timer values.- Scroll to the value you want to select: from

0 to 4 hours in steps of 30 minutes.- Press <OK> to confirm the sleep timer

value.- Press u to exit the screen and return to the

main menu, or press the blue colour buttonto exit the menu.

5.6 Favourites

- Press the ibutton to access the Favouritessub-menu.

5.6.1 TV Channels

This item is used to create and edit favouriteTV lists.- Press the ibutton to access the favourite

list settings- Scroll to the list you want to create or edit.- Press the ibutton to access the settings:

• Name: you may change the list nameusing u or ito select the character tobe edited, and t or y to scroll throughthe available characters

• Active: select Yes to enable the selectedfavourite list

• Select TV channels: scroll to the channels,and press <OK> to add them to theselected list

• Add all services: press <OK> to add allservices

• Remove all services: press <OK> toremove all services

- Press u to exit the screen and return to themain menu, or press the blue colour buttonto exit the menu.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h


5.6.2 Radio Stations

This item is used to create and edit favouriteradio lists.- If need be, press the <TV/RADIO> button

to switch to radio mode.- Proceed as indicated above.

5.7 Access Restrictions

This item is used to enable and edit accessrestrictions.- Press the ibutton to open the Access

restrictions setting menu:• Set Pin code protection: select On to

enable access restrictions.

Note: if Set Pin code protection is set to No,you cannot set the other accessrestriction settings.

• Maturity rating: select a maturity rating toenable Pin code protection forprogrammes which have a maturity ratinghigher than the setting. Alternatively,select None to disable this option.

• TV channels: scroll through the list andpress <OK> to lock a TV channel.

• Radio stations: scroll through the list andpress <OK> to lock a radio station.

• Parental Timers: press <OK> to viewexisting timers.Then proceed asdescribed for other timer types to set oredit parental timers (see paragraph 5.5.1).

• Change Pin code: press ito enable thePin code change features, then enter yourcurrent and new Pin code whenprompted, and then press <OK> toconfirm.

- Press the blue colour button to exit.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

26 MENU TREE

En

glish

6 Menu tree

Record / Remind

Sleep

TV Channels

Radio Stations

Language

Location

System settings

System Software

Set PIN codeprotection

Maturity Rating

TV channels

Radio stations

Parental Timers

Change PIN code

Service Lists

Service setup

Test reception

Restore factorysettings

Timers

Favourites

Preferences

Information

Access restrictions

Installation

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

ADVANCED SETTINGS 27

7.1 Changing the remotecontrol setting

If you have other items of equipment in yourhome and the remote control of the PHILIPSreceiver interferes with them, you can changethe setting of the remote control. For this youmust change the setting of both your receiverand remote control.

To change the setting of your receiver:Refer to paragraph 5.2.3.6.

To change the setting of your remote control:- Press number buttons 1 and 3

simultaneously and hold them for at least 3seconds

- Release the two buttons simultaneously.- Enter the setting for the remote control

which corresponds with the setting for yourreceiver within the next 60 seconds:

• 2 or 3 for alternative settings (038 or 040respectively)

• 1 for the default factory setting (039)

Note: if the batteries are removed while a button isbeing pressed, the default setting (039) isrestored.

7.2 More about recording

7.2.1 Connecting for PrepareRecord or Record Link

This connection allows automatic recordingwithout the necessity for programming yourVCR. Prior to deciding on this connectionmethod:- Consult the user manual of your VCR to

check if and how the Easy record feature issupported. Most PHILIPS VCR and DVD+RWrecorders support one of the two Easyrecord options.

- Verify that both your TV and VCR have twoSCART sockets.

Incorporate your receiver in your existinginstallation:- Plug your aerial lead plug into the “AERIAL

IN” socket of your digital receiver.- Connect the “RF OUT” socket of your

digital receiver to the “ANT IN” socket ofyour VCR by means of the RF coaxial leadsupplied with your digital receiver.

- Connect the “ANT OUT” socket of yourVCR to the aerial input socket of your TV bymeans of a RF coaxial lead.

- Connect the “TV” SCART socket of yourdigital receiver to the “EXT1” SCART socketof your TV by means of the SCART leadsupplied with your digital receiver.

- Connect the “VCR” SCART socket of yourdigital receiver to the “EXT2” SCART socketof your VCR (sometimes called “IN”) bymeans of a SCART lead.

- Connect the “EXT1” SCART socket of yourVCR (sometimes called “OUT”) to the“EXT2” SCART socket of your TV by meansof a SCART lead.

- Plug all your equipment, except your digitalreceiver, into the mains.

- Switch on your TV and select a channel.- Plug your digital receiver into the mains.Your

digital receiver will display the SETUP screen.- Proceed to chapter 3 to continue with the

channel scan if this has not already beendone.

Note:With this connection set up:- You can watch digital TV while you record

analogue TV.- You can watch analogue TV while you record

digital TV.- You can record the digital TV channel you are

watching without programming your VCR.- You can watch Play Back from your VCR

7 Advanced settings

NOTICE DTR 320_290405.qxd 29/04/05 14:07

28 ADVANCED SETTINGS

En

glish

7.2.2 Digital receiver and VCR settings

Refer to paragraph 5.2.3.2 on how to enablethe “Easy Record” function of your digitalreceiver.- Depending on your VCR brand and type, you

have to set the “VCR control” option to“Prepare Record” or “Record Link”. Refer tothe user manual of your VCR alternativelytry the two options to find out which isapplicable.

- Set your VCR to the mode allowing controlby your digital receiver.

7.2.3 Recording using the VCRcontrol feature

- Your digital receiver,TV and VCR areconnected and set according to 7.2.1.

- You have programmed a timer on yourdigital receiver.

- At timer start, your VCR starts recordingand at timer end your VCR stop recordingunder the control of your digital receiver.You no longer need to program your VCR torecord digital TV channels.

Note: some VCRs need to be in standby for therecording to start. Please refer to your VCRuser manual.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

TROUBLESHOOTING GUIDE 29

8 Troubleshooting guide

Experiencing difficulty operating your digital receiver? Check the following points first!

No picture, no sound and no front panelindication.

No picture, no sound, but the frontpanel red LED is on.

No picture, no sound but the frontpanel the left hand LED is on.

No picture, no sound, the left LED is offand the right LED is green on the frontpanel of the receiver.

The remote does not operate.

You cannot find all the channels youthink should be available.

You sometimes see a squared patternon the screen, your picture is “freezing”or a picture showing a TV with a noisypattern.

Receiver is not plugged into the mains.

Your receiver is in Standby mode.

You are watching a channel with noaudio and video available.

You are viewing standard analogue.The SCART connection to the TV isfaulty or loose.

Your TV has not selected the correctAV/EXT channel.

A timer is active, the receiver is locked,the front LEDs are either Green / Redor Orange / Red

The remote control batteries have beeninserted incorrectly or are dead.

You are not aiming your remotecontrol at the receiver.

Your remote control setting does notmatch your receiver setting.

The signal to your aerial may be weak.

Your aerial may need adjusting or yourlocal transmitter may not be working.

There could be a transmission problem.

Your aerial may have been moved, forexample by severe weather.

Your aerial connection has becomeloose or disconnected.

Check mains connection and press theStandby button on the front of thereceiver.

Press either P+ or P- button or anynumber button to bring the receiver outof standby.

Press either P+ or P- button or anynumber button to change channel.

Press the TV/STB button on your remote.Check SCART TV connection, making surecables are firmly pushed into the sockets.

Try manually selecting the AV/EXTchannel on your TV.

Press the “TIMER” and the “0” buttonssuccessively to cancel the TIMER andunlock the receiver.

Check the condition of the batteriesand replace if necessary, according toinstructions earlier in this manual.

Make sure you aim the remote at thereceiver and not at the TV.

Refer to paragraph 7.1 to modify yourremote control setting.

Try retuning your receiver, following therelevant steps in paragraph 5.3.2. If youare still missing channels, your aerial mayneed adjusting.

Call your local dealer.

This normally is only a temporarysituation and should correct itself.

Check signal quality and if necessary re-align your aerial.

Check all aerial connections and makesure they are all firmly pushed intosockets.

Problem Possible cause Action

NOTICE DTR 320_290405.qxd 29/04/05 14:07

30 TROUBLESHOOTING GUIDE

En

glish

Problem Possible cause Action

You cannot select all of the channels andthe P+/- or Arrow up/down buttons donot always work.

You cannot access a particular channel,even using the number buttons.

You have forgotten your PIN code.

You set a timer but it did not recordwhat you wanted.

You set a timer, but recording failed.

The order of the channels has changed.

The on-screen displays are not as sharpas expected.

The picture on some channels seems tohave been stretched or squashed.

The picture (programme or menu) isfrozen and/or you cannot operate yourreceiver.

Some channels have been selected asfavourites and the favourites mode ison.

The parental lock has been activated onthis channel and an OSD messageprompts you for your PIN code.

The recorder was not set correctly.

Loss of input signal

Loss of power

Locked channel

They have been re-arranged asdescribed in paragraph 5.3.1.1.

If you have connected using SCART andyou have an RGB-capable TV, one of thereceiver settings could be wrong.

You have connected the receiver TVSCART to a SCART socket of your TVset which is not RGB capable.

The broadcast is probably in widescreenand the receiver settings may not becorrect.

Use the <FAV> button to select anotherFavourite list. Use the All TV Channel listto see all available TV channels.

Enter your parental code to access thechannel or unlock the channel.See paragraph 5.7 for more details.

When prompted for your PIN code,enter the Master PIN code.This willallow you to proceed as well as resetthe PIN code to the default PIN code ofthe receiver (default is 1234).The Master PIN Code is 0112.Note: Keep this code secret to preventyour children from using it.

Make sure that your recorder is set forthe same time as your digital receiver.Alternatively use one of the EasyRecord options to control automaticallyyour recorder (see paragraph 7.2)

Tune your receiver to the desiredchannel, and then select Installation/Testreception to display the signal qualityand strength for this channel.

Check power connections.

Enter you PIN code when setting the timer.

Refer to this section to change theorder again.

Refer to paragraph 5.2.3.1 and modifythe “Video Output” setting to RGB.

Check if the TV SCART socket of theTV is RGB capable. If not refer to theuser manual of your TV to change theSCART connection to your TV.

Check the receiver “Screen format”option setting, following the informationin paragraph 5.2.3.1. If you have awidescreen TV, you may also need tocheck your TV settings.

Reset your receiver by pressing theStandby button on the front of the receiverfor more than 4 seconds.

NOTICE DTR 320_290405.qxd 29/04/05 14:07

En

glis

h

TECHNICAL SPECIFICATIONS 31

9 Technical specifications

This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.

Due to continued product improvement, the information contained in this manual is subject tochange without notice.

AC3®, Dolby Digital® and the double D symbol ® are registered trademarks of Dolby LaboratoriesLicensing Corporation.

Video Decoding

- Reception-DemodulationCOFDM 2K/8K

QPSKNetwork: MFN/SFN

- Frequency rangeVHF III & UHF IV/V

Audio Decoding

- Compression formatMPEG layer I/II

Convenience

- Ease of Installation- Favourite list radio programmes- Favourite list TV programmesParental controlLock with PIN codeParental timerProgrammable Events- RecordingRecord header message- User InterfaceAutomatic programme list updateMultiple subtitles supported7-day EPGOn Screen Display on TVSoftware upgrade over the airTV and Radio modes

System Specifications

- CPU speed 166 MHz- CPU/Video graphics 16 MB SDRAM- Flash memory size 4 MB- Video decoding

MPEG-2 DVB up to MP@MLVideo bit rate: up to 15 Mbit/sVideo format: 4:3 and 16:9Resolution: up to 720x576 pix

Tuner/Reception/Transmission

-Loop through frequency range47-862MHz

Connectivity

Audio Output - Analogue2x Stereo (Red/White cinch)

- Plug & Play yes- TV scart out

Controlled audio L/R, CVBS, RGB- VCR scart in

Audio L/R, CVBS, RGB

Accessories

Batteries- Included AccessoriesHigh quality SCART cableMains cordQuick install guideRemote ControlSafety & warranty bookletUser Manual

Dimensions (mm)

- Carton dimensions (WxDxH)365x225x65

- Product depth 260- Product height 45- Product width 165- Temperature (operation) 5 to 40º C- Temperature (storage) -10 to 70º C- Weight (kg) 1.45- Weight incl. Packaging (kg) 2.5- Power- Mains power 230V (+/-10%)

50Hz- Power Consumption (W) 6- Standby power consumption (W) < 6

The product complies withthe following Europeancouncil Directives:

- 73/23/EEC- 93/68/EEC- 89/336/EEC

NOTICE DTR 320_290405.qxd 29/04/05 14:07

NOTICE DTR 320_290405.qxd 29/04/05 14:07

doc.dtr2000 version n/b · congratulations on choosing the philips dtr 320 digital terrestrial...

Documents