DOUBLE MOUNT FOR THE XRGL40® 40mm EXTENDED RANGE GRENADE LAUNCHER

www.rippeleffect.com

The Double Mountis a recoil buffered

soft mount systemspecifically developed

and qualified for the XRGL40® 40mm Extended Range Grenade Launcher.

®

unmatched innovation

DOUBLE MOUNT FOR THE XRGL40® 40mm EXTENDED RANGE GRENADE LAUNCHER

The system can be used as a primary or secondary weapon system for vehicles and boats.

The system allows for very effective firepower in an ambush or fast attack situations.

The Double Mount is a clip-in-clip-out system which allows for the launchers to be mounted and dismounted without any modifications to the launchers or the mount.

Contact details:Fritz VisserEmail: fritz@rippeleffect.co.zaTel: +27-12-803-4347 or mobile: +27-82-881-6181

www.rippeleffect.com

Issue 3: March 2016

®

unmatched innovation

Mass of weapon mount alone 13.7kg

Surface finish Gunkote

Calibre of Launchers 40 x 46mm (low velocity) and 40 x 51mm (medium velocity)

Capacity 12 Rounds

Rate of fire 12 Rounds within 4 seconds

TECHNICAL DATA

CHARACTERISTICS

1. Arc of fire• Gunner’s position 1: up to 180º when mounted on a pintle mount, facing forward on the

vehicle centre line.• Gunner’s position 2: up to 270º when mounted on a swing arm and depending on the

gunners position in the vehicle.

2. ElevationDepending on the gunners postions, from -10º to +75º from horizontal.

3. Elevation and traverse stop Safety feature to limit weapon to a safe arc of fire.

4. Traverse and elevation lock The traverse and elevation lock secures the launchers and mount in a fixed position during

travelling. Three safety position locks, -10º, 0º, +45º.

5. Sighting system The double mount utilizes the same type of reflex sighting system fitted to the XRGL40®. 6. Universal pin interface The mount uses a universal quick release pin that allows for fast installation and removal from

vehicle or boat platform.