doughnut and corner bumpers bumpers …acornindprod.com/pdfs/bumpers.pdf · the bumper will...
TRANSCRIPT
144
A-813 DoughnutCommonly installed on theends of tubular handles to giveneeded protection in manipu-lation of equipment. Note steelinsert. Attached to wood withwood screws or to metal withrivets, bolts or metal screws.Weight: 6 oz. each.
BU
MP
ER
SB
UM
PE
RS DOUGHNUT AND CORNER BUMPERS
1"
3" 1.125"
1"
3"Holes for
1/4" Dia. Holes
1.25"
6.125"
A-833 CornerMade to give adequate protec-tion to all surfaces that may becontacted, such as doors, door-facings, walls, furniture andother equipment. Easilyattached by using self-tappingsheet metal screws.Weight: 6 oz. each.
A-1676 Corner
Made especially for use withA-567 Strip Bumper, giving auniform continuous effect allaround the equipment.Weight: 5 oz. each.
A-2680 Corner
Made especially for use withA-1541 Strip Bumper, giving auniform continuous effect allaround the equipment.Weight: 5 oz. each.
A-6926 Corner
Heavy duty corner bumper formaximum protection whenequipment is used in warehouseor industrial environment.Weight: 24 oz. each.
3-1/4"
1-3/8"HOLES FOR5/16" BOLTS
1-1/16"
1-1/4"1"
3"
3"
1"
HOLES FOR3/16" BOLTS
➛➛➛
➛
➛
➛
➛➛
➛
➛➛➛
➛
➛
➛HOLES FOR3/16" BOLTS
➛
➛
➛
➛
15/16"
1-1/16"
1-1/4"
3"
1"
3"
➛
➛➛
➛
➛
➛➛ ➛
➛
5/8"
2-1/2"
3/4" 1-1/8"
2-1/2"
3/4"
➛
➛➛
➛
➛
➛➛
➛ ➛
➛➛ ➛
HOLES FOR1/8" BOLTS
HOLES FOR1/4" BOLTS
75-80 Shore A
75-80 Shore A
75-80 Shore A
75-80 Shore A
75-80 Shore A
Acorn Industrial Products Co | 800-523-5474 | E-Mail [email protected]
145
STRIP BUMPERSModel A-2041Provides excellent protection fordesk and table edges, etc. Maximumlengths 16 ft. for easy installation.Metal insert optional. Weight: 14 oz./ft.
1"
18".75"
R.25(Typ)
.38"
.19"
1.50".38"
Model 4925Molded strip corner bumper 12" long,for application to any right angle shape.Easily installed with self-tapping metalscrews. Weight: 8 oz. each.
Model A-1541Popular small-sized strip bumper that isadaptable to many applications. Thismodel is easily applied to equipment.Metal insert optional. Weight: 4 oz./ft.
Model A-2084Flat based rubber strip bumperdesigned for same use as A-567.With split top for easier installation.Metal insert optional. Weight: 9 oz./ft.
Model A-567Flat based rubber strip designed for installationon either metal or wood surfaces. Easilyapplied and does not require a special channel.Metal insert optional. Weight: 9 oz./ft.
Model A-6930Designed for use with A-6929 corner bumper,this flat based rubber strip bumper gives addedprotection to outer perimeter of carts andequipment. Weight: 13 oz./ft.
Model A-4652Flat-based rubber strip bumper, withsplit top for easier installation. Metal insert optional. Weight: 4 oz./ft.
Model A-1019Made especially for 1-1/4” commercialchannel iron . Used for heavier type equip-ment where strength is necessary for opera-tion. Gives that extra needed protection.Metal insert optional. Weight: 12 oz./ft.
2-1/8" ➛
➛
➛
➛
1-5/8"
➛
➛
5/32"
➛
➛
1/2"
➛ ➛
3/4"
➛
➛21/32"
➛
➛
➛
➛
➛
3-3/16"
➛
➛3-3/16" ➛3-3/16"
➛
➛1-7/16"
12"
➛
➛3-3/16"
➛
➛3-3/16"
➛
➛3-3/16"
➛
➛1-7/16"13/32"
5/32"
13/32"
5/32"
90˚
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
16' 0"
➛
➛
16' 0"
➛
➛
16' 0"
21/32"
1/8"
3/4"
1-1/16"
9/64"
21/32"
3/8"➛
➛
➛
5/8"
11/16"29/32"
➛
➛
➛
➛➛
➛
➛
➛
➛ ➛➛
➛➛➛
3/64"
21/64"R.
5/32"
➛➛
4 R.
➛
➛
➛
➛
9/16"➛➛
➛ ➛
➛
➛
11/16"➛
➛
3/8"➛
➛
1/8"
➛
➛
5/32" 15/16"
➛
➛
1-1/16"➛
➛
1/2" R.19/32"
6°
➛
➛
➛
7-1/2"R.
➛
➛
➛
5/32" 15/16"
➛
➛
1-1/16"➛
➛
1/2" R.19/32"
6°
➛
➛
➛
Maximum Length 16'
Maximum Length 16'
Acorn Industrial Products Co | 800-523-5474 | E-Mail [email protected]
146
BU
MP
ER
SB
UM
PE
RS ROUND TUBING
SQUARE TUBING
REVOLVING
MOLD-ON HEAVY DUTY RUBBER
Threaded screw included
Threaded screw included
3" OUTSIDE DIA.5/8" Dia. I.D.3/4" Dia. I.D.7/8" Dia. I.D.1" Dia. I.D.
1-1/4" Dia. I.D.
5" OUTSIDE DIA.1" Dia. I.D.
1-1/4" Dia. I.D.1-1/2" Dia. I.D.1.9" Dia. I.D.
INSIDE THICKNESS15/16"15/16"15/16"15/16"15/16"
INSIDE THICKNESS1-1/8"1-1/8"1-1/8"1-1/8"
OUTSIDE THICKNESS15/16"15/16"15/16"15/16"15/16"
OUTSIDE THICKNESS5/8"5/8"5/8"5/8"
PART NUMBERA-8400A-8401A-8402A-8403A-8404
PART NUMBERA-2270A-2274A-2275A-2276
WEIGHT: 3 OZ. EACH
WEIGHT: 12 OZ. EACH
3" OUTSIDE DIA.7/8" Dia. I.D.1" Dia. I.D.
5" OUTSIDE DIA.1" Dia. I.D.
1-1/4" Dia. I.D.1-1/2" Dia. I.D.1-5/8" Dia. I.D.1-3/4" Dia. I.D.
2" Dia. I.D.
INSIDE THICKNESS15/16"15/16"
INSIDE THICKNESS1-13/16"1-13/16"1-13/16"1-13/16"1-13/16"1-13/16"
OUTSIDE THICKNESS15/16"15/16"
OUTSIDE THICKNESS5/8"5/8"5/8"5/8"5/8"5/8"
PART NUMBERA-8409A-8410
PART NUMBERA-7668A-4953A-2272A-5375A-6147A-2273
WEIGHT: 4 OZ. EACH
WEIGHT: 12 OZ. EACH
4" OUTSIDE DIA.3/8" Wide Face
5" OUTSIDE DIA.1/2" Wide Face
WEIGHT8 oz. each
WEIGHT11 oz. each
PART NUMBERA-6478
PART NUMBERA-7569
These revolving bumpers are designed to fit on a caster stem and prevent thebed or other article of furniture on which they are used from striking the wall.The bumper will strike the wall first and, if the bed is moved along the wall,the bumper will revolve, thus eliminating any chance of smearing the wall orcausing an erasure. Made from grey non-marking rubber. When orderingrevolving bumpers, specify bore size.
DIAMETER IN INCHES4"5"
7-1/2"8-1/2"
WEIGHT5 oz. each12 oz. each28 oz. each42 oz. each
PART NUMBERA-4940A-4941A-4820B-6487
Designed to fit almost every type of portable equipment requiring heavy dutybumpers. These solid rubber bumpers with a heavy steel insert are made ofgrey non-marking rubber, molded around the steel insert making the entireunit virtually indestructible and long lasting. The machine steel hubs are madein the following sizes: 7/16", 1/2", 9/16", 5/8”, 3/4", 13/16", 7/8" and 1". Othersizes available on request.
75-80 Shore A
75-80 Shore A
75-80 Shore A
75-80 Shore A
Acorn Industrial Products Co | 800-523-5474 | E-Mail [email protected]
94 94
5” diameter rolling bumper; tapered grey rubber bonded to zinc plated insert with removable center bushings to fit stem diameters from 3/8” to 1-1/8”. Specify bumper B-5.
BUMPERS / ADAPTERS
grey or black end bumper generally used on the ends of tubular handles on carts and platform trucks. Designed to help protect equipment as well as walls and door facings. Bumper Dimensions: 3-1/4” diameter with steel insert for 5/16” mounting bolt.
Bumpers
grey or black corner bumper for mounting on the corners of equipment, carts or any flat surfaces. Absorbs shock to protect equipment and walls, doors and furniture. Bumper Dimensions: 7/8” thick x 1” high x 2-5/8” long from inside corner on each side.
A heavy duty bumper with reinforced, rounded corner to protect equipment from shocks and bumps. Steel inserts inside bumper assures permanent mounting to equipment. Ends are tapered and rounded for added design appeal. Bumper Dimensions: 1” thick x 1-1/16” high x 3-1/16” long from inside corner on each side. Mounting holes are 13/64” diameter.
A common bumper used to protect a wide variety of mobile equipment and the surrounding environment from bumps and scrapes. This bumper is equipped with steel inserts and can be mounted on any flat surface. The ends of the bumper legs may be cut at notched area to make square ends. Bumper features steel inserts. Bumper Dimensions: 7/8” thick x 1” high x 3-1/8” long from inside corner on each side. Grey bumper with no steel insert, order model number 4724-30.
Designed to fit over 1” OD round or square tubing on carts and a variety of rolling equipment. Please specify round or square tubing when ordering. Specify B-3-1/2 R for round ID and B-3-1/2 S for square ID.
B-3-1/2 R(round Stem)
4714-00(grey)
4718-00(grey)
4719-00(Black) 4720-01
(grey)4721-01(Black)
4722-01(grey)
4724-01(Black)
B-3-1/2 S(Square Stem)
End Bumper B-1 Tubing Bumper B-3-1/2 Rolling Bumper B-5
Corner Bumper B-8 Corner Bumper B-10 Corner Bumper B-12
4714-01(Black)
Acorn Industrial Products Co | 520 Hertzog Blvd | King of Prussia, PA 19406 | P: 800-523-5474 | F: 800-782-6780 | E-Mail [email protected]