7/23/2019 Downgrading the Version

http://slidepdf.com/reader/full/downgrading-the-version 1/4

In this example, the above model will be imported from Civil 2015 v2.2 to Civil 2015 v1.3.

1.  Generate the mct file from the higher version Civil 2015 v2.2.

7/23/2019 Downgrading the Version

http://slidepdf.com/reader/full/downgrading-the-version 2/4

2.  After getting the MCT text, open Civil 2015 v1.3 , go to Tools->MCT command shell and paste the MCT text into the command shell.

7/23/2019 Downgrading the Version

http://slidepdf.com/reader/full/downgrading-the-version 3/4

3.  Upon removing and clicking on run again, we get some further messages:

7/23/2019 Downgrading the Version

http://slidepdf.com/reader/full/downgrading-the-version 4/4

 

In this way, different lines will need to be modified by trial and error testing through removal of last entries of lines of text. These entries

are usually printed as “0” or “NO”. Removing them will therefore not affect the model.

Depending on the versions between which transfer is being done, some lines of text however may need to be removed completely. One

such example is that of point spring supports which are quite different between Civil 2014 and Civil 2015. For such cases, it is much easier

to simply copy the point spring table from 2015 and paste it into 2014.