downlighting - home | signify

2
Downlighting Calculite, LyteProfile, & EasyLyte LED-EM Emergency Battery Pack Calculite LED compatibility Calculite LED gen 3 round & square New construction (N) frames only Nominal EM lumens (3500K) 1 Ceiling mount with EM test button Reflector trim mount with EM test button 3" 430-660lm Standard Available (round DL only) 4" 680-760lm Standard Available (DL and WW only) 6" & 7" 680-760lm Standard Available LyteProfile LED compatibility LyteProfile LED round New construction (N) frames only Nominal EM lumens (3500K) Ceiling mount with EM test button Reflector trim mount with EM test button 3" 430-660lm Standard Available (round DL only) 4" 690lm Standard Available (DL and WW only) 6" 700lm Standard Available (DL only) Features Battery pack: Bodine BSL06 battery pack featuring self-test and self-diagnostic functionality provides 90 minutes of lighting when AC power fails. Meets National Electrical and Life Saftey Codes. Accessible from below with attachment to the back side of the new construction frame junction box. Compatible with 120/277V. To estimate lumen output in emergency mode, multiply emergency pack wattage by luminaire configuration efficacy, then by 1.1. Test switch/charge light: Trim Mount: Can be installed integral to trim when ordered with IEM6 option code (e.g. 4RDLCCIEM6). Remote Mount: Order CAEM6TSCP mounting plate accessory. Mounting: Tool-less attachment to back side of new construction frame junction box. Options and Accessories CAEM6: Field install EM6 kit with Bodine BSL6 6W battery pack with self-test/self-diagnostic. Includes EM pack mounted on cover plate for attachment to back side of junction box on new construction (N) frames. Includes remote ceiling plate for test switch. To mount test switch to trim for new construction frame, order trim with IEM6 option code (e.g. C4RDLCCIEM6). CAEM6TSCP: Ceiling cover plate for remote mounted EM6 test switch. 1/2" (25mm) hole, 4 3/8" (109mm) x 2 3/4" (69mm) rectangular. Includes two mounting screws. White finish. Labels and Listings UL listed for damp locations only. Not approved for Chicago plenum applications. Warranty 5 year limited warranty Visit Signify.com/warranties for more information on Signify's standard 5- year limited warranty on complete luminaire systems. Ceiling mounted test switch provided standard, add EM6 suffix to new construction frame-in kit (example: 4RNEM6).Reflector mounted test switch available on some trim types, see below table for availability and restrictions, add IEM6 suffix to reflector trim where available (example: C4RDLCCIEM6). LED-EM 12/21 page 1 of 2 Project: Location: Cat.No: Type: Qty: Notes: IEM6 Option Codes Switch Orientation by Shape Family Aperture/Type Remote Integral Excluded Integral Styles Calculite 3" DL/LW/AA LW, AA 4" DL/WW Sq LW, AA 6" DL/WW Sq LW 7" DL/WW ––– IEM6 Option Codes Switch Orientation by Shape Family Aperture/Type Remote Integral Excluded Integral Styles LyteProfile 3" DL/LW/AA LW, AA 4" DL/LW LW 6" DL/LW LW EasyLyte 4" DL ––– ––– 6" DL ––– –––

Upload: others

Post on 30-Jan-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Downlighting

Calculite, LyteProfile, & EasyLyte

LED-EM Emergency Battery Pack

Calculite LED compatibilityCalculite LED gen 3 round & squareNew construction (N) frames only

Nominal EM lumens(3500K) 1

Ceiling mountwith EM test button

Reflector trim mountwith EM test button

3" 430-660lm Standard Available (round DL only)

4" 680-760lm Standard Available (DL and WW only)

6" & 7" 680-760lm Standard Available

LyteProfile LED compatibilityLyteProfile LED round New construction (N) frames only

Nominal EM lumens (3500K)

Ceiling mountwith EM test button

Reflector trim mountwith EM test button

3" 430-660lm Standard Available (round DL only)

4" 690lm Standard Available (DL and WW only)

6" 700lm Standard Available (DL only)

FeaturesBattery pack: Bodine BSL06 battery pack featuring self-test and self-diagnostic functionality provides 90 minutes of lighting when AC power fails. Meets National Electrical and Life Saftey Codes. Accessible from below with attachment to the back side of the new construction frame junction box. Compatible with 120/277V.

To estimate lumen output in emergency mode, multiply emergency pack wattage by luminaire configuration efficacy, then by 1.1.

Test switch/charge light: Trim Mount: Can be installed integral to trim when ordered with IEM6 option code (e.g. 4RDLCCIEM6).

Remote Mount: Order CAEM6TSCP mounting plate accessory.

Mounting: Tool-less attachment to back side of new construction frame junction box.

Options and AccessoriesCAEM6: Field install EM6 kit with Bodine BSL6 6W battery pack with self-test/self-diagnostic. Includes EM pack mounted on cover plate for attachment to back side of junction box on new construction (N) frames. Includes remote ceiling plate for test switch. To mount test switch to trim for new construction frame, order trim with IEM6 option code (e.g. C4RDLCCIEM6).

CAEM6TSCP: Ceiling cover plate for remote mounted EM6 test switch. 1/2" (25mm) hole, 4 3/8" (109mm) x 2 3/4" (69mm) rectangular. Includes two mounting screws. White finish.

Labels and ListingsUL listed for damp locations only.Not approved for Chicago plenum applications.

Warranty

5 year limited warranty Visit Signify.com/warranties for more information on Signify's standard 5- year limited warranty on complete luminaire systems.

Ceiling mounted test switch provided standard, add EM6 suffix to new construction frame-in kit (example: 4RNEM6).Reflector mounted test switch available on some trim types, see below table for availability and restrictions, add IEM6 suffix to reflector trim where available (example: C4RDLCCIEM6).

LED-EM 12/21 page 1 of 2

Project:

Location:

Cat.No:

Type:

Qty:

Notes:

IEM6 Option Codes Switch Orientation by ShapeFamily Aperture/Type Remote Integral Excluded Integral Styles

Calculite 3" DL/LW/AA LW, AA

4" DL/WW Sq LW, AA

6" DL/WW Sq LW

7" DL/WW –––

IEM6 Option Codes Switch Orientation by ShapeFamily Aperture/Type Remote Integral Excluded Integral StylesLyteProfile 3" DL/LW/AA LW, AA

4" DL/LW LW

6" DL/LW LWEasyLyte 4" DL ––– –––

6" DL ––– –––

3.35" 2.63"

2.37" 2.20"

1.83"

4.14"

C6RDL C6SDL

C4RDL C4SDL

C3RDL

C7RDL

47⁄8 in 123 mm

13 in 329 mm

Mounting bar

103⁄8 in 264 mm

Grounding spring

Mounting bar clamp

T-bar clip

16⅜ in 416 mm 13¼ in

337 mm

8¾ in 221 mm

10⅞ in 277 mm

7½ in 190 mm

13 in 330 mm

10⅜ in 264 mm

16⅜ in 416 mm

14⅜ in 365 mm

11½ in 293 mm

(max.)

11¼ in 286 mm

6⅛ in 156 mm

13¼ in 337 mm

7¾ in 197 mm

ø4½ in 114 mm

Ceiling Cutout ø3½ in 89 mm

ø4⅜ in 111 mm

9¼ in 235 mm

4⅞ in 123 mm

⅜ in 10 mm

Driver receptical

plug

6⅛ in 156 mm

Maxium Ceiling Thickness

Lensed Wall Wash (LW): 1 1⁄2 in 38mm

Wall Wash(WW, DW, CW): 1 in 25mm

Ceiling Cutout ø5⅛ in 130 mm

ø4½ in 114 mm ø5¾ in 146 mm

ø4 in 102 mm

ø3⅛ in 79 mm

13 in 330 mm

3½ in 87 mm

8 in 203 mm

18⅛ in 461 mm

min

ø3½ in 89 mm

7½ in 191 mm

2¾ in 70 mm

4⅞ in 124 mm

2 in 51 mm

Maximum ceiling

thickness

NEE

D R

EVIS

ED 3

-IN

CH

VER

SIO

NS

1 ⅞"(46 mm)

Center point location for integral emergency

test switch (IEM6)

LED-EM Calculite, LyteProfile, & EasyLyteEmergency Battery Pack

3RN/4RN frame dimensions

6SN/7RN frame dimensions

Emergency battery pack shown with EM6 option on new construction non-IC frame.

© 2021 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.

LED-EM 12/21 page 2 of 2

Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807 Telephone: 855-486-2216

Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone: 800-668-9008

All trademarks are owned by Signify Holding or their respective owners.

www.lightolier.com

3SN/4SN/6RN frame dimensions

9 ⅝"(244 mm)

installation clearance required

4" NEW CONSTRUCTION 6" NEW CONSTRUCTION 4" REMODELER 6" REMODELER

4X4 NEW CONSTRUCTION 6X6 NEW CONSTRUCTION 4X4 REMODELER 6X6 REMODELER

4" NEW CONSTRUCTION 6" NEW CONSTRUCTION 4" REMODELER 6" REMODELER

8 ¾"(221 mm)

10 ⅛"(257 mm)

12 ⅝"(321 mm)

10 ⅛"(257 mm)

9 ¼"(235 mm)

9 ½"(241 mm)

10 ½"(267 mm)

10 ⅞"(276 mm)

3 ¼"(83 mm)

4 ⅜"(111 mm)

4 ⅞"(124 mm)

4 ⅞"(124 mm)

10 ⅞"(276 mm)

7 ½"(190 mm)

10 ⅞"(276 mm)

7 ½"(190 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

14 ¾"(375 mm)

9 ½"(241 mm)

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

9 ¼"(235 mm)

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

10 ½"(267 mm)

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

10 ⅜"(264 mm)

10 ⅜"(264 mm)

12 ⅞"(327 mm)

10 ⅜"(263 mm)

24"(610 mm)

MAX.

8 ¾"(221 mm)

10 ⅜"(264 mm)

24"(610 mm)

MAX.

24"(610 mm)

MAX.

24"(610 mm)

MAX.

24"(610 mm)

MAX.

10 ⅛"(257 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

10 ⅜"(264 mm)

24"(610 mm)

MAX.

4 ½"(114 mm) ½"

(13 mm)½"

(13 mm)½"

(13 mm)½"

(13 mm)5 ¾"

(146 mm)

2 ¾"(70 mm)

4 ¼"(108 mm) ½"

(13 mm)5 ¾"

(146 mm)

3 ¼"(83 mm)

4 ½"(114 mm)

½"(13 mm)

5 ¾"(146 mm)

4 ½"(114 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

4 ¼"(108 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

4 ½"(114 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

6"(152 mm)

7 ¼"(184 mm)

3 ⅜"(86 mm)

½"(13 mm)

5 ¾"(146 mm)

7 ¼"(184 mm)

4 ⅛"(104 mm)

½"(13 mm)

6"(152 mm)

7 ¼"(184 mm)

6"(152 mm)

7 ¼"(184 mm)

6"(152 mm)

7 ¼"(184 mm)

4 ⅞"(124 mm)

½"(13 mm)

5 ¾"(146 mm)

7 ¼"(184 mm)

4 ⅜"(111 mm)

4 ⅜"(111 mm)

4 ½"(114 mm)

4 ½"(114 mm)

4 ⅜"(111 mm)

4 ⅜"(111 mm)

9 ⅝"(244 mm)

installation clearance required

4" NEW CONSTRUCTION 6" NEW CONSTRUCTION 4" REMODELER 6" REMODELER

4X4 NEW CONSTRUCTION 6X6 NEW CONSTRUCTION 4X4 REMODELER 6X6 REMODELER

4" NEW CONSTRUCTION 6" NEW CONSTRUCTION 4" REMODELER 6" REMODELER

8 ¾"(221 mm)

10 ⅛"(257 mm)

12 ⅝"(321 mm)

10 ⅛"(257 mm)

9 ¼"(235 mm)

9 ½"(241 mm)

10 ½"(267 mm)

10 ⅞"(276 mm)

3 ¼"(83 mm)

4 ⅜"(111 mm)

4 ⅞"(124 mm)

4 ⅞"(124 mm)

10 ⅞"(276 mm)

7 ½"(190 mm)

10 ⅞"(276 mm)

7 ½"(190 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

14 ¾"(375 mm)

9 ½"(241 mm)

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

9 ¼"(235 mm)

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

14 ⅜"(365 mm)

11 ½"(292 mm)

MAX.

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

10 ½"(267 mm)

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

17 ⅝"(448 mm)

12 ¼"(311 mm)

MAX.

10 ⅜"(264 mm)

10 ⅜"(264 mm)

12 ⅞"(327 mm)

10 ⅜"(263 mm)

24"(610 mm)

MAX.

8 ¾"(221 mm)

10 ⅜"(264 mm)

24"(610 mm)

MAX.

24"(610 mm)

MAX.

24"(610 mm)

MAX.

24"(610 mm)

MAX.

10 ⅛"(257 mm)

12 ⅜"(314 mm)

8 ¼"(209 mm)

10 ⅜"(264 mm)

24"(610 mm)

MAX.

4 ½"(114 mm) ½"

(13 mm)½"

(13 mm)½"

(13 mm)½"

(13 mm)5 ¾"

(146 mm)

2 ¾"(70 mm)

4 ¼"(108 mm) ½"

(13 mm)5 ¾"

(146 mm)

3 ¼"(83 mm)

4 ½"(114 mm)

½"(13 mm)

5 ¾"(146 mm)

4 ½"(114 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

9 ⅝"(244 mm)

installation clearance required

4 ¼"(108 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

4 ½"(114 mm)

5 ¾"(146 mm)

4 ⅞"(124 mm)

½"(13 mm)

6"(152 mm)

7 ¼"(184 mm)

3 ⅜"(86 mm)

½"(13 mm)

5 ¾"(146 mm)

7 ¼"(184 mm)

4 ⅛"(104 mm)

½"(13 mm)

6"(152 mm)

7 ¼"(184 mm)

6"(152 mm)

7 ¼"(184 mm)

6"(152 mm)

7 ¼"(184 mm)

4 ⅞"(124 mm)

½"(13 mm)

5 ¾"(146 mm)

7 ¼"(184 mm)

4 ⅜"(111 mm)

4 ⅜"(111 mm)

4 ½"(114 mm)

4 ½"(114 mm)

4 ⅜"(111 mm)

4 ⅜"(111 mm)

Round Apertures3" - 1 ⅞" (46mm)4" - 2 ⅜" (60mm)6" - 3 ⅜" (85mm)7" - 1 ⅛" (105mm)

Square Apertures4" - 2 ¼" (55mm)6" - 2 ⅝" (66mm)

14 ⅜" - 24" max365mm - 610mm

13" - 24" max330mm - 610mm

16 ⅞" - 24" max429mm - 610mm

CAEM6TSCP Cover Plate Accessory

Purchased separately for remote test switch

Included with CAEM6 field installed EM pack

4 ⅜" 111mm

2 ¾" 70mm

½" 13mm

X X

Emergency battery pack shown with EM6 option on new construction non-IC frame.

Emergency battery pack shown with EM6 option on new construction non-IC frame.