Transcript
Installation for Three Sided Enclosure #JG16E
For the enclosure to fit properly allow enclosure to come to room temperature before installing.
Fig.1
Place enclosure on top with pocket to the front. Hook pocket and pull enclosure to the rear, hooking rear corners tightly.
(Fig.1) Fold down three panels to allow sides to hang freely.
Fig.2
Unzip windshield frame sleeve from panel. (Fig.2)
Fig.3
Zip sleeve to windshield frame as shown. (Fig.3)
Fig.4
Zip four corners down and adjust enclosure to fit evenly. (Fig.4
Fig.5
Attach elastic anchors to the front and rear of running board.
Fig.6
Then mount windshield as shown.