Download - 0007189-Justifiable Precision and Accuracy
-
8/3/2019 0007189-Justifiable Precision and Accuracy
1/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
2/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
3/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
4/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
5/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
6/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
7/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
8/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
9/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
10/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
11/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
12/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
13/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
14/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
15/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
16/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
17/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
18/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
19/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
20/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
21/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
22/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
23/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
24/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
25/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
26/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
27/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
28/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
29/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
30/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
31/33
-
8/3/2019 0007189-Justifiable Precision and Accuracy
32/33
QUIZ
Justifiable Precision and Accuracy in Structural and Civil
Engineering Calculations1. Until the mid-1970 s, an engineer using a slide rule could report an answer to
___________________ significant figures.
a. One or twob. Two or threec. Three or fourd. Five or six
2. The quality of being exactly or sharply defined or stated is:
a. Accuracyb. Precisionc. Errord. None of the above
3. The quality of freedom from mistake or error:
a. Accuracyb. Precisionc. Error
d. None of the above
4. Per ASTM E29, the rule when multiplying or dividing is that the result shall contain ____________ significant digits than the value with the smaller number of significantdigits.
a. Moreb. Less thanc. Two timesd. No more
5. In structural design calculations, the Load Effect should be ___________ than theStructural Resistance.
a. Greater thanb. Greater than or equal toc. Less thand. Less than or equal to
-
8/3/2019 0007189-Justifiable Precision and Accuracy
33/33
6. The dead load on a structure can be predicted with ______________ certainty thanthe transient live load.
a. Greaterb. Lessc. Equald. Indeterminate
7. Design live loads determined using ASCE 7 can be determined to how manysignificant figures?
a. One or twob. Two or three
c. Three or fourd. Five or six
8. Load combinations can be determined to how many significant figures?
a. One or twob. Two or threec. Three or fourd. Five or six
9. For practical structural calculation applications, the maximum number of significantfigures that should be reported is:
a. 1b. 3c. 5d. 7
10. The design strength of reinforced concrete should not be reported to a level ofprecision greater than _______ significant figures
a. 1b. 2c. 3d. 4