Download - 07 Power Voltage Feedthroughs
7
7-74 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Introduction
Power and high voltage feedthroughs are designed to carry high voltageand/or high current in many vacuum processes. Power feedthroughs areoffered in a wide design range to match the requirements of differentapplications.The atmosphere-side ceramic surface is mostly covered with high temperatureglass coating in order to reduce surface contamination and to increase thecreep resistance. We also offer a choice of liquid-cooled power and voltagefeedthroughs. Liquid-cooled feedthroughs are typically used with grounded,closed cooling systems and non-conductive coolants such as deionized wateror ethylene glycol.
Standard Specifications- Voltages to 100 kV- Current to 1000 A- Temperature range: -269 °C to 450 °C- Internal pressure 1.33 x 10-10 mbar to 200 bar
Standard connections- Weld (without flange)- KF flange- CF flange- Custom connections on request
7
7-75www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 1 - 2 kV
Voltage: 500 V DC, 1 pin, without flange, conductor diameter: 1.1 mm
Technical dataMagnetic yes
MaterialHousing Kovar®Conductor see tableInsulator alumina ceramics
Temperature range-80 °C to 450 °C
AccessoriesSingle crimp contacts 1.1 mmConductor diameter stainless steel
(gold plated)Material -269 °C to 450 °CCurrent 2 APacking unit 5 pieces
Without flange
Conductor material Current (A)Order codeKovar® tubeW-V500-NC-CE-KOVT11 -molybdenumW-V500-NC-CE-MO11 11.5
Single crimp contacts
DescriptionOrder codecrimp contactEK-C-CLG11
7
7-76 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 1 - 2 kV
Voltage: 1 kV, 3 - 41 pins, conductor diameter: 1.0 mm, crimp contacts on both sides
Technical dataMagnetic no
MaterialHousing stainless steel 304Conductor nickel-plated steelInsulator glass ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
CurrentPer conductor 5 A
Accessories
Single crimp contactsBore 1.0 mmType femaleVacuum compatible yesPacking unit 20 pieces
without flange
on KF flange
on CF flange
7
7-77www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 1 - 2 kV
Voltage: 1 kV, 3 - 41 pins, conductor diameter: 1.0 mm, crimp contacts on both sides
Without flange
Number of pins APressure, 20 °C (bar)Order code3W-MP-3-NC-CE-SSN 38 18.926W-MP-6-NC-CE-SSN 34 22.10
10W-MP-10-NC-CE-SSN 31 25.2719W-MP-19-NC-CE-SSN 28 28.4532W-MP-32-NC-CE-SSN 26 34.8041W-MP-41-NC-CE-SSN 24 37.97
On KF flange
Flange Pressure, 20 °C *(bar)
Number of pinsOrder code
* With trapped centering ring and clamp chain
DN25KFKF25-MP-3-NC-CE-SSN 3 7DN40KFKF40-MP-6-NC-CE-SSN 6 6DN40KFKF40-MP-10-NC-CE-SSN 10 6DN40KFKF40-MP-19-NC-CE-SSN 19 6DN40KFKF40-MP-32-NC-CE-SSN 32 6DN50KFKF50-MP-41-NC-CE-SSN 41 6
On CF flange
Flange Pressure, 20 °C (bar)Number of pinsOrder code
DN40CFCF -MP-3-NC-CE-SSN 3 38DN40CFCF40-MP-6-NC-CE-SSN 6 34DN40CFCF40-MP-10-NC-CE-SSN 10 31DN40CFCF40-MP-19-NC-CE-SSN 19 28DN40CFCF40-MP-32-NC-CE-SSN 32 26DN CFCF40-MP-41-NC-CE-SSN 41 24
Single crimp contacts
DescriptionOrder codecrimp contacts for multipin connectorCC10F
40
40
7
7-78 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 1 - 2 kV
Voltage: 1.5 kV, 8 pins, conductor diameter: 0.81 mm
Technical data
MagneticNickel yesStainless steel 1.4301 noMolybdenum noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
Single crimp contactsConductor diameter 0.81 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 16 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-79www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 1 - 2 kV
Voltage: 1.5 kV, 8 pins, conductor diameter: 0.81 mm
Without flange
Conductor material Pressure, 20 °C(bar)
Current (A)Order code
stainless steel 304W-HV1-8-CE-SS081 1.1 34nickelW-HV1-8-CE-NI081 5 34
molybdenumW-HV1-8-CE-MO081 8.5 34copperW-HV1-8-CE-CU081 16 34
On KF flange
Flange Pressure,20 °C * (bar)
Current (A)Conductor materialOrder code
* With trapped centering ring and clamp chain
DN16KFKF16-HV1-8-CE-SS081 stainless steel 304 1.1 7DN16KFKF16-HV1-8-CE-NI081 nickel 5 7DN16KFKF16-HV1-8-CE-MO081 molybdenum 8.5 7DN16KFKF16-HV1-8-CE-CU081 copper 16 7
On CF flange
Flange Pressure,20 °C (bar)
Current (A)Conductor materialOrder code
DN16CFCF16-HV1-8-CE-SS081 stainless steel 304 1.1 34DN16CFCF16-HV1-8-CE-NI081 nickel 5 34DN16CFCF16-HV1-8-CE-MO081 molybdenum 8.5 34DN16CFCF16-HV1-8-CE-CU081 copper 16 34
Single crimp contacts
DescriptionOrder codecrimp contactEK-C-CB081
7
7-80 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
Voltage: 5 kV, 1 pin, without flange, conductor diameter: 1.3 mm
Technical data
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature range-269 °C to 450 °C
Pressure (20 °C)241 bar
Accessories
Single crimp contactsConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 20 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 20 APacking unit 10 pieces
7
7-81www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
Voltage: 5 kV, 1 pin, without flange, conductor diameter: 1.3 mm
Without flange
Conductor material MagneticCurrent (A)Order codestainless steel 304W-HV5-CE-SS13 1.8 no
nickelW-HV5-CE-NI13 8.2 yesnickel tubeW-HV5-CE-NIT13 - yes
copperW-HV5-CE-CU13 27 no
Single contacts
DescriptionOrder codecrimp contactEK-C-CB13
clamp with slotted screwEK-LK-CB13
7
7-82 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
Voltage: 2 - 5 kV, 4 - 10 pins, conductor diameter: 1.6 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor Alumel®Insulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
CurrentPer pin 5 A
Accessories
Single crimp contactsConductor diameter 1.6 mmMaterial Alumel®Temperature range -269 °C to 350 °CCurrent -Packing unit 5 pieces
Single clamps with slotted screwConductor diameter 1.6 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 20 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-83www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
Voltage: 2 - 5 kV, 4 - 10 pins, conductor diameter: 1.6 mm
Without flange
Number of pins Pressure,20 °C (bar)
Voltage (kV)Order code
4W-HV5-4-CE-AM16 5 416W-HV5-6-CE-AM16 5 38
10W-HV2-10-CE-AM16 2 34
On KF flange
Number of pins Pressure,20 °C * (bar)
Voltage (kV)FlangeOrder code
* With trapped centering ring and clamp chain
4KF16-HV5-4-CE-AM16 DN16KF 5 76KF16-HV5-6-CE-AM16 DN16KF 5 7
10KF16-HV2-10-CE-AM16 DN16KF 2 7
On CF flange
Number of pins Pressure,20 °C (bar)
Voltage (kV)FlangeOrder code
4CF16-HV5-4-CE-AM16 DN16CF 5 416CF16-HV5-6-CE-AM16 DN16CF 5 38
10CF16-HV2-10-CE-AM16 DN16CF 2 344CF40-HV5-4-CE-AM16 DN40CF 5 416CF40-HV5-6-CE-AM16 DN40CF 5 38
10CF40-HV2-10-CE-AM16 DN CF 2 34
Single contacts
DescriptionOrder codecrimp contactEK-C-AM16
clamp with slotted screwEK-LK-CB16
40
7
7-84 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
Voltage: 6 kV, 2 - 4 pins, conductor diameter: 1.3 mm
Technical data
MagneticNickel yesStainless steel 304 noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Pressure (20 °C)Without flange 86 barOn KF flange 7 barOn CF flange 86 bar
Accessories
Single crimp contactsConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 20 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 20 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-85www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 2 - 6 kV
2 - 4 pins, conductor diameter: 1.3 mm
Without flange
Number of pins Current (A)Conductor materialOrder code
2W-HV6-2-CE-SS13 stainless steel 304 1.82W-HV6-2-CE-NI13 nickel 8.22W-HV6-2-CE-CU13 copper 274W-HV6-4-CE-SS13 stainless steel 304 1.84W-HV6-4-CE-NI13 nickel 5.24W-HV6-4-CE-CU13 copper 27
On KF flange
Number of pins Current (A)Conductor materialFlangeOrder code
With trapped centering ring and clamp chain
2KF16-HV6-2-CE-SS13 DN16KF stainless steel 304 1.82KF16-HV6-2-CE-NI13 DN16KF nickel 8.22KF16-HV6-2-CE-CU13 DN16KF copper 274KF16-HV6-4-CE-SS13 DN16KF stainless steel 304 1.84KF16-HV6-4-CE-NI13 DN16KF nickel 8.24KF16-HV6-4-CE-CU13 DN16KF copper 27
On CF flange
Number of pins Current (A)Conductor materialFlangeOrder code
2CF16-HV6-2-CE-SS13 DN16CF stainless steel 304 1.82CF16-HV6-2-CE-NI13 DN16CF nickel 8.22CF16-HV6-2-CE-CU13 DN16CF copper 274CF16-HV6-4-CE-SS13 DN16CF stainless steel 304 1.84CF16-HV6-4-CE-NI13 DN16CF nickel 8.24CF16-HV6-4-CE-CU13 DN16CF copper 27
Single contacts
DescriptionOrder codecrimp contactEK-C-CB13
clamp with slotted screwEK-LK-CB13
7
7-86 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
Micro HV feedthrough, 1 - 4 pins, conductor diameter: 0.76 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor molybdenum
(gold plated)Insulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Current3 A
Accessories
Micro HV PlugTemperature range -55 °C to 125 °CCurrent 3 ALength approx. 2 m
Single crimp contactsConductor diameter 0.81 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 16 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-87www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
Micro HV feedthrough, 1 - 4 pins, conductor diameter: 0.76 mm
Without flange
Number of pins Pressure, 20 °C (bar)Order code1W-HV10S-CE-MOP07 96
On KF flange
Flange Pressure, 20 °C *(bar)
Number of pinsOrder code
* With trapped centering ring and clamp chain
DN16KFKF16-HV10S-1-CE-MOP07 1 7DN40KFKF40-HV10S-2-CE-MOP07 2 6DN40KFKF40-HV10S-3-CE-MOP07 3 6DN40KFKF40-HV10S-4-CE-MOP07 4 6
On CF flange
Flange Pressure, 20 °C (bar)Number of pinsOrder code
DN16CFCF16-HV10S-1-CE-MOP07 1 96DN40CFCF40-HV10S-2-CE-MOP07 2 96DN40CFCF40-HV10S-3-CE-MOP07 3 96DN CFCF40-HV10S-4-CE-MOP07 4 96
Micro HV plug with cable
DescriptionOrder codemicro HV plug with cablePLUG-HV10S-MOP07
Single crimp contacts
DescriptionOrder codecrimp contactEK-C-CB081
40
7
7-88 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
1 - 2 pins, conductor diameter: 2.4 mm
Technical data
MagneticNickel yesStainless steel 304 noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 30 ALength approx. 2 m
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 25 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-89www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
1 - 2 pins, conductor diameter: 2.4 mm
Without flange
Number ofpins
Pressure, 20 °C(bar)
Current (A)Conductor materialOrder code
1W-HV10S-CE-SS24 stainless steel 304 3.6 1031W-HV10S-CE-NI24 nickel 16.5 1031W-HV10S-CE-CU24 copper 55 103
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductor materialNumberof pins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HV10S-1-CE-SS24 1 stainless steel 304 3.6 6DN16KFKF16-HV10S-1-CE-NI24 1 nickel 16.5 6DN16KFKF16-HV10S-1-CE-CU24 1 copper 55 6DN40KFKF40-HV10S-2-CE-SS24 2 stainless steel 304 3.6 7DN40KFKF40-HV10S-2-CE-NI24 2 nickel 16.5 7DN40KFKF40-HV10S-2-CE-CU24 2 copper 55 7
On CF flange
Flange Pressure,20 °C (bar)
Current(A)
Conductor materialNumberof pins
Order code
DN16CFCF16-HV10S-1-CE-SS24 1 stainless steel 304 3.6 103DN16CFCF16-HV10S-1-CE-NI24 1 nickel 16.5 103DN16CFCF16-HV10S-1-CE-CU24 1 copper 55 103DN40CFCF40-HV10S-2-CE-SS24 2 stainless steel 304 3.6 103DN40CFCF40-HV10S-2-CE-NI24 2 nickel 16.5 103DN CFCF40-HV10S-2-CE-CU24 2 copper 55 103
High voltage plug
DescriptionOrder codehigh voltage plugPLUG-HV10-24
Single contacts
DescriptionOrder codeclamp with flat headed screwBC23
contact with flat headed screwEK-S-CB24clamp with slotted screwEK-LK-CB24
40
7
7-90 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
3 - 4 pins, conductor diameter: 2.4 mm
Technical data
MagneticNickel yesStainless steel 304 noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 30 ALength approx. 2 m
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 25 APacking unit 10 pieces
on KF flange
on CF flange
7
7-91www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
3 - 4 pins, conductor diameter: 2.4 mm
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductor materialNumberof pins
Order code
* With trapped centering ring and clamp chain
DN40KFKF40-HV10S-3-CE-SS24 3 stainless steel 304 3.6 6DN40KFKF40-HV10S-3-CE-NI24 3 nickel 16.5 6DN40KFKF40-HV10S-3-CE-CU24 3 copper 55 6DN40KFKF40-HV10S-4-CE-SS24 4 stainless steel 304 3.6 6DN40KFKF40-HV10S-4-CE-NI24 4 nickel 16.5 6DN40KFKF40-HV10S-4-CE-CU24 4 copper 55 6
On CF flange
Flange Pressure,20 °C (bar)
Current(A)
Conductor materialNumberof pins
Order code
DN40CFCF40-HV10S-3-CE-SS24 3 stainless steel 304 3.6 103DN40CFCF40-HV10S-3-CE-NI24 3 nickel 16.5 103DN40CFCF40-HV10S-3-CE-CU24 3 copper 55 103DN40CFCF40-HV10S-4-CE-SS24 4 stainless steel 304 3.6 103DN40CFCF40-HV10S-4-CE-NI24 4 nickel 16.5 103DN CFCF40-HV10S-4-CE-CU24 4 copper 55 103
High voltage plug
DescriptionOrder codeHV plugPLUG-HV10-24
Single contacts
DescriptionOrder codeclamp with flat headed screwBC23
contact with flat headed screwEK-S-CB24clamp with slotted screwEK-LK-CB24
40
7
7-92 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
1 - 4 pins, conductor diameter: 3.9 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 75 ALength approx. 2 m
Single clamps with slotted screwConductor diameter 3.9 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 30 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-93www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 10 kV
1 - 4 pins, conductor diameter: 3.9 mm
Without flange
Number ofpins
Pressure, 20 °C(bar)
Current (A)Conductormaterial
Order code
1W-HV10S-CE-NI39 30 691W-HV10S-CE-CU39 100 69
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductormaterial
Numberof pins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HV10S-1-CE-NI39 1 nickel 30 7DN16KFKF16-HV10S-1-CE-CU39 1 copper 100 7DN40KFKF40-HV10S-2-CE-NI39 2 nickel 30 6DN40KFKF40-HV10S-2-CE-CU39 2 copper 100 6DN40KFKF40-HV10S-3-CE-NI39 3 nickel 30 6DN40KFKF40-HV10S-3-CE-CU39 3 copper 100 6DN40KFKF40-HV10S-4-CE-NI39 4 nickel 30 6DN40KFKF40-HV10S-4-CE-CU39 4 copper 100 6
On CF flange
Flange Pressure,20 °C (bar)
Current (A)Conductormaterial
Number ofpins
Order code
DN16CFCF16-HV10S-1-CE-NI39 1 nickel 30 69DN16CFCF16-HV10S-1-CE-CU39 1 copper 100 69DN40CFCF40-HV10S-2-CE-NI39 2 nickel 30 69DN40CFCF40-HV10S-2-CE-CU39 2 copper 100 69DN40CFCF40-HV10S-3-CE-NI39 3 nickel 30 69DN40CFCF40-HV10S-3-CE-CU39 3 copper 100 69DN40CFCF40-HV10S-4-CE-NI39 4 nickel 30 69DN CFCF40-HV10S-4-CE-CU39 4 copper 100 69
High voltage plug
DescriptionOrder codeHV plugPLUG-HV10S-39
Single clamps
DescriptionOrder codeclamp with slotted screwEK-LK-CB39
nickelcopper
40
7
7-94 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 15 kV
1 - 4 pins, conductor diameter: 0.97 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor molybdenum
(gold plated)Insulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Current7.5 A
Accessories
Mini HV plugTemperature range -55 °C to 125 °CCurrent 7.5 ALength approx. 2 m
Single crimp contactsConductor diameter 1.0 mmMaterial copper alloyTemperature range -200 °C to 200 °CCurrent 15 APacking unit 5 pieces
without flange
on KF flange
on CF flange
7
7-95www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 15 kV
1 - 4 pins, conductor diameter: 0.97 mm
Without flange
Number of pins Pressure, 20 °C (bar)Order code1W-HV15S-CE-MOP1 76
On KF flange
Flange Pressure, 20 °C *(bar)
Number of pinsOrder code
* With trapped centering ring and clamp chain
DN16KFKF16-HV15S-1-CE-MOP1 1 6DN40KFKF40-HV15S-2-CE-MOP1 2 7DN40KFKF40-HV15S-3-CE-MOP1 3 7DN40KFKF40-HV15S-4-CE-MOP1 4 7
On CF flange
Flange Pressure, 20 °C (bar)Number of pinsOrder code
DN16CFCF16-HV15S-1-CE-MOP1 1 76DN40CFCF40-HV15S-2-CE-MOP1 2 76DN40CFCF40-HV15S-3-CE-MOP1 3 76DN40CFCF40-HV15S-4-CE-MOP1 4 76
Mini high voltage plug
DescriptionOrder codemini plug, voltage: 15 kVPLUG-HV15-MOP1
Single contacts
DescriptionOrder codecrimp contactEK-C-CLG10
7
7-96 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 15 kV
1 - 4 pins, conductor diameter: 6.4 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
Power plugTemperature range -55 °C to 125 °CCurrent 100 ALength approx. 2 m
Single clamps with slotted screwConductor diameter 6.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 35 APacking unit 10 pieces
7
7-97www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 15 kV
1 - 4 pins, conductor diameter: 6.4 mm
Without flange
Number of pins Pressure, 20 °C(bar)
Current (A)Order code
1W-HV15S-CE-NI64 nickel 56 521W-HV15S-CE-CU64 copper 185 52
On KF flange
Flange Current (A)Number ofpins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HV15S-1-CE-NI64 1 nickel 56 7DN16KFKF16-HV15S-1-CE-CU64 1 copper 185 7DN40KFKF40-HV15S-2-CE-NI64 2 nickel 56 6DN40KFKF40-HV15S-2-CE-CU64 2 copper 185 6DN40KFKF40-HV15S-3-CE-NI64 3 nickel 56 6DN40KFKF40-HV15S-3-CE-CU64 3 copper 185 6DN40KFKF40-HV15S-4-CE-NI64 4 nickel 56 6DN40KFKF40-HV15S-4-CE-CU64 4 copper 185 6
On CF flange
Flange Pressure,20 °C (bar)
Current (A)Number ofpins
Order code
DN16CFCF16-HV15S-1-CE-NI64 1 nickel 56 52DN16CFCF16-HV15S-1-CE-CU64 1 copper 185 52DN40CFCF40-HV15S-2-CE-NI64 2 nickel 56 52DN40CFCF40-HV15S-2-CE-CU64 2 copper 185 52DN40CFCF40-HV15S-3-CE-NI64 3 nickel 56 52DN40CFCF40-HV15S-3-CE-CU64 3 copper 185 52DN40CFCF40-HV15S-4-CE-NI64 4 nickel 56 52DN CFCF40-HV15S-4-CE-CU64 4 copper 185 52
Power plug
DescriptionOrder codepower plugPLUG-HV15S-64 100 52
Single clamp
DescriptionOrder codeclamp with slotted screwEK-LK-CB64
Conductormaterial
Conductormaterial
Conductormaterial
Pressure, 20 °C(bar)
40
7
7-98 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 20 kV
1 - 2 pins, conductor diameter: 2.4 mm
Technical data
MagneticNickel yesStainless steel 304 noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 55 ALength approx. 2 m
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamp with slotted screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 25 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-99www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 20 kV
1 - 2 pins, conductor diameter: 2.4 mm
Without flange
Number ofpins
Pressure,20 °C (bar)
Current (A)Conductor materialOrder code
1W-HV20S-CE-SS24 stainless steel 304 3.6 1031W-HV20S-CE-NI24 nickel 16.5 1031W-HV20S-CE-CU24 copper 55 103
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductor materialNumberof pins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HV20S-1-CE-SS24 1 stainless steel 304 3.6 7DN16KFKF16-HV20S-1-CE-NI24 1 nickel 16.5 7DN16KFKF16-HV20S-1-CE-CU24 1 copper 55 7DN40KFKF40-HV20S-2-CE-SS24 2 stainless steel 304 3.6 6DN40KFKF40-HV20S-2-CE-NI24 2 nickel 16.5 6DN40KFKF40-HV20S-2-CE-CU24 2 copper 55 6
On CF flange
Flange Pressure,20 °C (bar)
Current(A)
Conductor materialNumberof pins
Order code
DN16CFCF16-HV20S-1-CE-SS24 1 stainless steel 304 3.6 103DN16CFCF16-HV20S-1-CE-NI24 1 nickel 16.5 103DN16CFCF16-HV20S-1-CE-CU24 1 copper 55 103DN40CFCF40-HV20S-2-CE-SS24 2 stainless steel 304 3.6 103DN40CFCF40-HV20S-2-CE-NI24 2 nickel 16.5 103DN CFCF40-HV20S-2-CE-CU24 2 copper 55 103
High voltage plug with silicone insulated cable
DescriptionOrder codehigh voltage plugPLUG-HV20-24
Single contacts
DescriptionOrder codecontact with flat headed screwEK-S-CB24
clamp with slotted screwEK-LK-CB24
40
7
7-100 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 20 kV
3 - 4 pins, conductor diameter: 2.4 mm
Technical data
MagneticNickel yesStainless steel 304 noCopper no
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeOn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Pressure (20 °C)On KF flange 6 barOn CF flange 103 bar
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 55 ALength approx. 2 m
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamp with slotted screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 25 APacking unit 10 pieces
on CF flange
7
7-101www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Voltage: 20 kV
3 - 4 pins, conductor diameter: 2.4 mm
On KF flange
Flange Current (A)Conductor materialNumber ofpins
Order code
With trapped centering ring and clamp chain
DN40KFKF40-HV20S-3-CE-SS24 3 stainless steel 304 3.6DN40KFKF40-HV20S-3-CE-NI24 3 nickel 16.5DN40KFKF40-HV20S-3-CE-CU24 3 copper 55DN40KFKF40-HV20S-4-CE-SS24 4 stainless steel 304 3.6DN40KFKF40-HV20S-4-CE-NI24 4 nickel 16.5DN40KFKF40-HV20S-4-CE-CU24 4 copper 55
On CF flange
Flange Current (A)Conductor materialNumber ofpins
Order code
DN40CFCF40-HV20S-3-CE-SS24 3 stainless steel 304 3.6DN40CFCF40-HV20S-3-CE-NI24 3 nickel 16.5DN40CFCF40-HV20S-3-CE-CU24 3 copper 55DN40CFCF40-HV20S-4-CE-SS24 4 stainless steel 304 3.6DN40CFCF40-HV20S-4-CE-NI24 4 nickel 16.5DN CFCF40-HV20S-4-CE-CU24 4 copper 55
High voltage plug with silicone insulated cable
DescriptionOrder codeHV plugPLUG-HV20-24
Single contacts
DescriptionOrder codecontact with flat headed screwEK-S-CB24
clamp with slotted screwEK-LK-CB24
40
7
7-102 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 - 2 pins, conductor diameter: 9.5 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Wall thicknessStainless steel 304 tube 0.89 mmCopper tube 0.81 mm
without flange
on KF flange
on CF flange
7
7-103www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 - 2 pins, conductor diameter: 9.5 mm
Without flange
Number ofpins
Pressure,20 °C (bar)
Current (A)Conductor materialOrder code
1W-HC8-CE-SST95 stainless steel 304 tube - 341W-HC8-CE-CUT95 copper tube - 341W-HC8-CE-SS95 stainless steel 304 21 341W-HC8-CE-CU95 copper 330 34
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductor materialNumberof pins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HC8-1-CE-SST9 1 stainless steel 304 tube - 7DN16KFKF16-HC8-1-CE-CUT9 1 copper tube - 7DN16KFKF16-HC8-1-CE-SS95 1 stainless steel 304 21 7DN16KFKF16-HC8-1-CE-CU95 1 copper 330 7DN50KFKF50-HC8-2-CE-SST9 2 stainless steel 304 tube - 6DN50KFKF50-HC8-2-CE-CUT9 2 copper tube - 6DN50KFKF50-HC8-2-CE-SS95 2 stainless steel 304 21 6DN50KFKF50-HC8-2-CE-CU95 2 copper 330 6
On CF flange
Flange Pressure,20 °C (bar)
Current(A)
Conductor materialNumberof pins
Order code
DN16CFCF16-HC8-1-CE-SST95 1 stainless steel 304 tube - 34DN16CFCF16-HC8-1-CE-CUT95 1 copper tube - 34DN16CFCF16-HC8-1-CE-SS95 1 stainless steel 304 21 34DN16CFCF16-HC8-1-CE-CU95 1 copper 330 34DN40CFCF40-HC8-2-CE-SST95 2 stainless steel 304 tube - 34DN40CFCF40-HC8-2-CE-CUT95 2 copper tube - 34DN40CFCF40-HC8-2-CE-SS95 2 stainless steel 304 21 34DN CFCF40-HC8-2-CE-CU95 2 copper 330 3440
7
7-104 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, conductor diameter: 12.7 - 19.0 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
without flange
on CF flange
without flange
on CF flange
7
7-105www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, conductor diameter: 12.7 mm
Without flange
Conductor material Pressure,20 °C (bar)
WCurrent (A)Order code
copper tubeW-HC8-1-CE-CUT127 - 0.81 24copperW-HC8-1-CE-CU127 470 - 24
On KF flange
Flange Pressure,20 °C * (bar)
WCurrent (A)Conductormaterial
Order code
* With trapped centering ring and clamp chain
DN25KFKF25-HC8-1-CE-CUT127 copper tube - 0.81 7DN25KFKF25-HC8-1-CE-CU127 copper 470 - 7
On CF flange
Flange Pressure,20 °C (bar)
WCurrent (A)Conductormaterial
Order code
DN40CFCF40-HC8-1-CE-CUT127 copper tube - 0.81 24DN CFCF40-HC8-1-CE-CU127 copper 470 - 24
Voltage: 8 kV, 1 pin, conductor diameter: 19.0 mm
Without flange
Conductor material Pressure,20 °C (bar)
WCurrent (A)Order code
copper tubeW-HC8-CE-CUT190 - 1.65 17copperW-HC8-CE-CU190 800 - 17
On KF flange
Flange Pressure,20 °C * (bar)
WCurrent (A)Conductormaterial
Order code
* With trapped centering ring and clamp chain
DN40KFKF40-HC8-1-CE-CUT190 copper tube - 1.65 6DN40KFKF40-HC8-1-CE-CU190 copper 800 - 6
On CF flange
Flange Pressure,20 °C (bar)
WCurrent (A)Conductormaterial
Order code
DN40CFCF40-HC8-1-CE-CUT190 copper tube - 1.65 17DN CFCF40-HC8-1-CE-CU190 copper 800 - 17
40
40
7
7-106 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, liquid cooled, conductor diameter: 19.0 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor tellurium-copperInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Current1000 A
without flange
on KF flange
on CF flange
7
7-107www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, liquid cooled, conductor diameter: 19.0 mm
Without flange
Pressure, 20 °C (bar)Order code17W-HC8K-CE-TECU190
On KF flange
Flange Pressure, 20 °C * (bar)Order code
* With trapped centering ring and clamp chainDN40KFKF40-HC8K-CE-TECU190 6
On CF flange
Flange Pressure, 20 °C (bar)Order codeDN CFCF40-HC8K-CE-TECU190 1740
7
7-108 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, conductor diameter: 6.4 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Wall thicknessStainless steel 304 tube 0.89 mmCopper 0.81 mm
Accessories
Single clamps with slotted screwConductor diameter 6.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 35 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-109www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 1 pin, conductor diameter: 6.4 mm
Without flange
Conductor material Pressure,20 °C (bar)
Current (A)Order code
stainless steel 304 tubeW-HC8-CE-SST64 - 52copper tubeW-HC8-CE-CUT64 - 52
stainless steel 304W-HC8-CE-SS64 12 52copperW-HC8-CE-CU64 185 52
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductor materialOrder code
* With trapped centering ring and clamp chain
DN16KFKF16-HC8-1-CE-SST64 stainless steel 304 tube - 7DN16KFKF16-HC8-1-CE-CUT64 copper tube - 7DN16KFKF16-HC8-1-CE-SS64 stainless steel 304 12 7DN16KFKF16-HC8-1-CE-CU64 copper 185 7
On CF flange
Flange Pressure,20 °C (bar)
Current(A)
Conductor materialOrder code
DN16CFCF16-HC8-1-CE-SST64 stainless steel 304 tube - 52DN16CFCF16-HC8-1-CE-CUT64 copper tube - 52DN16CFCF16-HC8-1-CE-SS64 stainless steel 304 12 52DN16CFCF16-HC8-1-CE-CU64 copper 185 52DN40CFCF40-HC8-1-CE-SST64 stainless steel 304 tube - 52DN40CFCF40-HC8-1-CE-CUT64 copper tube - 52DN40CFCF40-HC8-1-CE-SS64 stainless steel 304 12 52DN CFCF40-HC8-1-CE-CU64 copper 185 52
Single clamps
DescriptionOrder codeclamp with slotted screwEK-LK-CB64
40
7
7-110 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 2 - 4 pins, conductor diameter: 6.4 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeOn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Pressure (20 °C)On KF flange 6 barOn CF flange 52 bar
Wall thicknessStainless steel 304 tube 0.76 mmCopper 0.76 mm
Accessories
Single clamps with slotted screwConductor diameter 6.4 mmContact material beryllium-copperTemperature range -269 °C to 400 °CCurrent 35 APacking unit 10 pieces
on KF flange
on CF flange
7
7-111www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Power Feedthroughs
Voltage: 8 kV, 2 - 4 pins, conductor diameter: 6.4 mm
On KF flange
Flange Current (A)Conductor materialNumber ofpins
Order code
With trapped centering ring and clamp chain
DN40KFKF40-HC8-2-CE-SST64 2 stainless steel 304 tube -DN40KFKF40-HC8-2-CE-CUT64 2 copper tube -DN40KFKF40-HC8-2-CE-SS64 2 stainless steel 304 12DN40KFKF40-HC8-2-CE-CU64 2 copper 185DN50KFKF50-HC8-4-CE-SST64 4 stainless steel 304 tube -DN50KFKF50-HC8-4-CE-CUT64 4 copper tube -DN50KFKF50-HC8-4-CE-SS64 4 stainless steel 304 12DN50KFKF50-HC8-4-CE-CU64 4 copper 185
On CF flange
Flange Current (A)Conductor materialNumber ofpins
Order code
DN40CFCF40-HC8-2-CE-SST64 2 stainless steel 304 tube -DN40CFCF40-HC8-2-CE-CUT64 2 copper tube -DN40CFCF40-HC8-2-CE-SS64 2 stainless steel 304 12DN40CFCF40-HC8-2-CE-CU64 2 copper 185DN40CFCF40-HC8-4-CE-SST64 4 stainless steel 304 tube -DN40CFCF40-HC8-4-CE-CUT64 4 copper tube -DN40CFCF40-HC8-4-CE-SS64 4 stainless steel 304 12DN CFCF40-HC8-4-CE-CU64 4 copper 185
Single clamps
DescriptionOrder codeclamp with slotted screwEK-LK-CB64
40
7
7-112 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 25 kV DC, 1 - 4 pins, conductor diameter: 6.4 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor see tableInsulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
Power plugTemperature range -55 °C to 125 °CCurrent 100 ALength approx. 2 m
Single clamps with slotted screwConductor diameter 6.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 35 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-113www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 25 kV DC, 1 - 4 pins, conductor diameter: 6.4 mm
Without flange
Number ofpins
Pressure, 20 °C(bar)
Current (A)Conductormaterial
Order code
-W-HV25S-CE-CU64 copper 185 52-W-HV25S-CE-NI64 nickel 56 52
On KF flange
Flange Pressure,20 °C * (bar)
Current(A)
Conductormaterial
Numberof pins
Order code
* With trapped centering ring and clamp chain
DN16KFKF16-HV25S-1-CE-CU64 1 copper 185 7DN16KFKF16-HV25S-1-CE-NI64 1 nickel 56 7DN40KFKF40-HV25S-2-CE-CU64 2 copper 185 6DN40KFKF40-HV25S-2-CE-NI64 2 nickel 56 6DN50KFKF50-HV25S-3-CE-CU64 3 copper 185 6DN50KFKF50-HV25S-3-CE-NI64 3 nickel 56 6DN50KFKF50-HV25S-4-CE-CU64 4 copper 185 6DN50KFKF50-HV25S-4-CE-NI64 4 nickel 56 6
On CF flange
Flange Pressure,20 °C (bar)
Current (A)Conductormaterial
Number ofpins
Order code
DN16CFCF16-HV25S-1-CE-CU64 1 copper 185 52DN16CFCF16-HV25S-1-CE-NI64 1 nickel 56 52DN40CFCF40-HV25S-1-CE-CU64 1 copper 185 52DN40CFCF40-HV25S-1-CE-NI64 1 nickel 56 52DN40CFCF40-HV25S-2-CE-CU64 2 copper 185 52DN CFCF40-HV25S-2-CE-NI64 2 nickel 56 52DN63CFCF63-HV25S-3-CE-CU64 3 copper 185 52DN63CFCF63-HV25S-3-CE-NI64 3 nickel 56 52DN63CFCF63-HV25S-4-CE-CU64 4 copper 185 52DN63CFCF63-HV25S-4-CE-NI64 4 nickel 56 52
Power plug, 25 kV
DescriptionOrder codepower plugPLUG-HV25S-64
Single clamps
DescriptionOrder codeclamp with slotted screwEK-LK-CB64
40
7
7-114 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 30 - 100 kV DC, 1 pin, conductor diameter: 2.4 mm
Technical dataMagnetic yes
MaterialHousing stainless steel 304Conductor stainless steel 304Insulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 6.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 30 APacking unit 10 pieces
without flange
on KF flange
on CF flange
7
7-115www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 30 - 100 kV DC, 1 pin, conductor diameter: 2.4 mm
Without flange
On KF flange
Flange Pressure, 20 °C *(bar)
Current (A)Voltage (kV)Order code
* With trapped centering ring and clamp chain
DN40KFKF40-HV30R-1-CE-SS24 30 3.6 6DN100ISOISO100-HV70R-1-CE-SS40 70 6.5 0DN100ISOISO100-HV100R-1-CE-SS40 100 6.5 0
On CF flange
Flange Pressure, 20 °C(bar)
Current (A)Voltage (kV)Order code
DN CFCF40-HV30R-1-CE-SS24 30 3.6 17DN100CFCF100-HV70R-1-CE-SS40 70 6.5 8.6DN100CFCF100-HV100R-1-CE-SS40 100 6.5 8.6
Single contacts
DescriptionOrder codeclamp with slotted screwBC23
contact with flat headed screwEK-S-CB24clamp with slotted screwEK-LK-CB24
Pressure, 20 °C *(bar)
Current (A)Voltage (kV)Order code
30 3.670 6.5
100 6.5
178.68.6
W-HV30R-CE-SS24W-HV70R-CE-SS24W-HV100R-CE-SS24
40
7
7-116 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 40 - 50 kV DC, 1 pin, conductor diameter: 1.6 mm
Technical dataMagnetic yes
MaterialHousing Kovar®Conductor stainless steel 304Insulator alumina ceramics
Temperature rangeWithout flange -269 °C to 450 °COn KF flange -25 °C to 205 °COn CF flange -269 °C to 450 °C
Accessories
High voltage plugTemperature range -55 °C to 125 °CCurrent 10 ALength approx. 2 m
Single crimp contactsMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 20 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 1.6 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 20 APacking unit 10 pieces
without flange
on CF flange
7
7-117www.vacom-vacuum.com
Power and High Voltage Feedthroughs
High Voltage Feedthroughs
Voltage: 40 - 50 kV DC, 1 pin, conductor diameter: 1.6 mm
Without flange
Voltage (kV) Pressure, 20 °C (bar)Order code40W-HV40S-CE-CRS16 2850W-HV50S-CE-CRS16 28
On KF flange
Flange Pressure,20 °C * (bar)
Voltage (kV)Order code
* With trapped centering ring and clamp chain
DN40KFKF40-HV40S-CE-CRS16 40 6DN50KFKF40-HV50S-CE-CRS16 50 6
On CF flange
Flange Pressure,20 °C (bar)
Voltage (kV)Order code
DN40CFCF40-HV40S-CE-CRS16 40 28DN CFCF40-HV50S-CE-CRS16 50 28
High voltage plug, voltage: 40 - 50 kV
Voltage (kV)Order code40PLUG-HV40S-1650PLUG-HV50S-16
Single contacts
DescriptionOrder codecrimp contactEK-C-CB16
clamp with slotted screwEK-LK-CB16
40
7
7-118 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
RF Power Feedthroughs, Liquid Cooled
Up to 13.56 MHz, conductor diameter 6.4 mm, wall thickness 0.8 mm
Technical dataMagnetic no
MaterialHousing stainless steel 304Conductor copper tubeInsulator alumina ceramics
Temperature rangeWithout flange -55 °C to 350 °COn KF flange -25 °C to 205 °COn CF flange -55 °C to 350 °C
Frequency13.56 MHz
without flange
on CF flange
7
7-119www.vacom-vacuum.com
Power and High Voltage Feedthroughs
RF Power Feedthroughs, Liquid Cooled
Up to 13.56 MHz, conductor diameter 6.4 mm, wall thickness 0.8 mm
Without flange
Number of pins Pressure,20 °C (bar)
Voltage (kV)Order code
1W-HF-CE-CUT64 14 352W-HF8-CE-CUT64 8 8.6
On KF flange
Flange Pressure, 20 °C *(bar)
Voltage (kV)Number of pinsOrder code
* With trapped centering ring and clamp chain
DN25KFKF25-HF-CE-CUT64 1 14 6DN40KFKF40-HF8-CE-CUT64 2 8 7
On CF flange
Flange Pressure, 20 °C(bar)
Voltage (kV)Number of pinsOrder code
DN40CFCF40-HF-CE-CUT64 1 14 35DN CFCF40-HF8-CE-CUT64 2 8 8.640
7
7-120 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for power and high voltage feedthroughs, 2 kV, 4 pins
Technical data
MaterialConductor see tableBolt stainless steel 304Seal FKMInsulator alumina ceramics
Temperature range-25 °C to 205 °C
Pressure (20 °C)14 bar
Accessories
Single clamps with slotted screwConductor diameter 1.3 mmMaterial stainless steelPacking unit 10 pieces
Single crimp contactsConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 20 APacking unit 10 pieces
Single contacts with flat headed screwConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 1.3 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 30 APacking unit 10 pieces
7
7-121www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for power and high voltage feedthroughs, 2 kV, 4 pins
Conductor material MagneticCurrent (A)Order codenickelBP-HV2-4-CE-NI13 8.2 yescopperBP-HV2-4-CE-CU13 27 no
Single contacts
DescriptionOrder codeclamp with slotted screwBC15
crimp contactEK-C-CB13contact with flat headed screwEK-S-CB13
clamp with slotted screwEK-LK-CB13
7
7-122 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for power feedthroughs, voltage: 2 - 5 kV, 1 - 3 pins
Technical dataMagnetic no
MaterialBolt stainless steel 304Conductor copperInsulator alumina ceramicsSeal FKM
Temperature range-25 °C to 205 °C
Pressure (20 °C)14 bar
Accessories
Single clamps with slotted screwConductor diameter 2.4 mmMaterial stainless steelPacking unit 10 pieces
Single contacts with flat headed screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 200 °CCurrent 25 APacking unit 10 pieces
Single clamps with slotted screwConductor diameter 2.4 mmMaterial beryllium-copperTemperature range -269 °C to 400 °CCurrent 25 APacking unit 10 pieces
7
7-123www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for power feedthroughs, voltage: 2 - 5 kV, 1 - 3 pins
Number of pins Current (A)Voltage (kV)Order code1BP-HV5-1-CE-CU24 5 552BP-HV2-2-CE-CU24 2 273BP-HV2-3-CE-CU24 2 27
Single contacts
DescriptionOrder codeclamp with slotted screwBC23
contact with flat headed screwEK-S-CB24clamp with slotted screwEK-LK-CB24
7
7-124 www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for high power feedthroughs, voltage: 12 kV, 1 pin
Technical dataMagnetic yes
MaterialBolt stainless steel 304Conductor copperSeal FKMInsulator alumina ceramics
Temperature range-25 °C to 205 °C
Current185 A
Pressure (20 °C)14 bar
Bulkhead fitting for HV feedthroughs, voltage: 12 kV, 1 pin
DescriptionOrder codeBulkhead fitting for high voltage feedthroughsBP-HV12-CE-CU14TH
Accessories: PTFE shield for BP-HV12-CE-CU14TH
DescriptionOrder codePTFE shieldBP-HV12-SH-PTFE
7
7-125www.vacom-vacuum.com
Power and High Voltage Feedthroughs
Bulkhead Fittings
for high power feedthroughs, voltage: 15 kV, 2 pins
Technical dataBolt stainless steel 304Conductor copperInsulator alumina ceramicsSeal FKMMagnetic yes
Temperature range185 A
Current185 A
Pressure (20 °C)8.6 bar
Bulkhead fitting for HV feedthroughs, voltage: 15 kV, 2 pins
DescriptionOrder codeBulkhead fitting for high voltage feedthroughsBP-HV15-2-CE-14Z