Download - [1] Fundamental of Telecommunic
![Page 1: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/1.jpg)
23/4/1723/4/17 123/4/17 123/4/17 1
Fundamental of Telecommunication
![Page 2: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/2.jpg)
23/4/1723/4/17 223/4/17 223/4/17 2
Switch mode
Circuit switch
Packet switch
Telephone communication
Connection-oriented
Data communication
Computer net communication
Newfangled IP Phone
Message switch
Store-and-forward switch
Telegram, FAX, Mails
X.25
Frame Relay
ATM
![Page 3: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/3.jpg)
23/4/1723/4/17 323/4/17 323/4/17 3
SourceA C DB
Destination
Call Request Signal
Call Accept Signal
Talking
Acknowledgement Signal
Time
Circuit Switching
Time delay
Signaling process
![Page 4: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/4.jpg)
23/4/1723/4/17 423/4/17 423/4/17 4
Telephone communication is Connection-oriented network,
and it needed Signaling system used to control the
connection and release of calls.
Before the talk, needed connection voice path signaling
process, and after the talk, needed release circuit signaling
process.
The advantage of the circuit switching, is the real time, and
the short transmission time delay, which make it suitable for
real-time communications, like voice communications.
![Page 5: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/5.jpg)
23/4/1723/4/17 523/4/17 523/4/17 5
The disadvantages of the circuit switching is, the low
usage of circuit and long time in establishing circuit,
which make the mode unsuitable for data
communications with strong impulsiveness.
Duration of talk, because the dedicated path can not
share with other call, so that it is expensive.
p7
![Page 6: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/6.jpg)
23/4/1723/4/17 623/4/17 623/4/17 6
Circuit switching refers to the switching mode that the switching equipment sets up a specially used circuit between the caller and the called before their communications, and the caller and the called occupy the circuit during the communication process until the communication is finished.
The advantage of the circuit switching is the real time and the short transmission time delay, which make it suitable for real-time communications like voice communications.
The disadvantages of the circuit switching is the low usage of circuit and long time in establishing circuit, which make the mode unsuitable for data communications with strong impulsiveness.
![Page 7: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/7.jpg)
23/4/1723/4/17 723/4/17 723/4/17 7
SourceA C DB
Destination
Time
Message Switching
Time delayMSG
MSG
MSG
![Page 8: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/8.jpg)
23/4/1723/4/17 823/4/17 823/4/17 8
In message switching, the transmitting side, need not
establish the circuit beforehand,
The basis for this switching is SAF (Store-And-Forward).
The switch can first store the received messages, and mails
in the buffer queue, and then calculate according to the
address information, in the mail heads to get the route. Once
the output line is determined and the line is idle, the stored
messages can be forwarded.
![Page 9: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/9.jpg)
23/4/1723/4/17 923/4/17 923/4/17 9
The advantage: It can immediately send messages,
without waiting for the idleness of the receiving side.
Thus the circuits are very frequently used.
The disadvantage is the switch should be configured
with large-capacity memory, and the transmission time
delay is big and uncertain. Therefore, It is applicable only
for data transmission, but not for real-time
communications, for example voice communications.
![Page 10: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/10.jpg)
23/4/1723/4/17 1023/4/17 1023/4/17 10
Message switching, called also as information switching, is used to switch the message information such as fax, mails, and text files. The basis for this switching is SAF (Store-And-Forward). In message switching, the transmitting side need not establish the circuit beforehand, but can send messages directly to the switching office of the receiving side at any time, no matter whether the receiving side is in the idle state.
The switch can first store the received messages and texts in the buffer queue and then calculate according to the address information in the text heads to get the route. Once the output line is determined and the line is idle, the stored messages can be forwarded. Switching equipment of the middle nodes of the telecom networks all adopt this mode for the receiving, storing and forwarding of texts until texts reach the destinations.
![Page 11: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/11.jpg)
23/4/1723/4/17 1123/4/17 1123/4/17 11
It should be noted that in the text-switching network, a text is transmitted via only one path in the network, but different texts from the same source and to the same destination might be transmitted via different paths in the network.
The disadvantage of text switching is that the switch should be configured with large-capacity memory and the transmission time delay is big and uncertain. Therefore, this switching mode is applicable only for data transmission but not for real-time interactive communications, for example voice communications.
![Page 12: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/12.jpg)
23/4/1723/4/17 1223/4/17 1223/4/17 12
2
A 3
4
5
a a
1
6
a aBA
(a) Text switching
![Page 13: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/13.jpg)
23/4/1723/4/17 1323/4/17 1323/4/17 13
SourceA C DB
Destination
Time
Packetswitching
Time delayPKT1
PKT2
PKT3
PKT1
PKT2 PKT1
PKT3 PKT2
PKT3
Message
![Page 14: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/14.jpg)
23/4/1723/4/17 1423/4/17 1423/4/17 14
Packet switching is the same as message switching, except a message is divided into a series of packets of limited lengths.
The advantage of packet switching, is the high rate in transmitting data. It enables better real-time than message switching. Packet switching enables interactive communications, (including voice communication) and makes high use of circuits. The transmission time delay of packet switching, is much less, than message switching, and its requirement for memory capacity, is also much less than message switching.
The disadvantage of packet switching, is the complicated handling process of node switches.
![Page 15: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/15.jpg)
23/4/1723/4/17 1523/4/17 1523/4/17 15
In packet switching, a message will be divided into data packets of certain lengths, and each packet normally comprises hundreds or even thousands of bits. The packet data will be sent to packet switches together with addresses and suitable control information. As in text switching, the SAF technology is also adopted in the packets during packet switching.
The two switching modes differ in that the length of a packet is normally much less than the length of a text. In the switching network, packets of a text might reach the destination via different paths. And as the storage time delay of middle nodes is different from one another, the sequences of the arrivals of packets or the transmission of source nodes might be different.
![Page 16: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/16.jpg)
23/4/1723/4/17 1623/4/17 1623/4/17 16
Therefore, after the packets reach the destination, they should be sequenced and de-packed before the correct data can be sent to users. Both text switching and packet switching adopt the error control technology called ARQ (Automatic Error Request) to handle the disturbance or other errors of the data when transmitted in the network.
The advantage of packet switching is the high rate in transmitting data. It enables better real-time than text switching. Packet switching enables interactive communications (including voice communication) and makes high use of circuits. The transmission time delay of packet switching is much less than text switching, and its requirement for memory capacity is also much less than text switching. The disadvantage of packet switching is the complicated handling process of node switches.
![Page 17: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/17.jpg)
23/4/1723/4/17 1723/4/17 1723/4/17 17
2
1 3 X.25
4 3 2 1
6 4
5
22 2
2
1 1
B 4 3 2 1
a a
(b) Packet switching
443 4
3
![Page 18: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/18.jpg)
23/4/1723/4/17 1823/4/17 1823/4/17 18
Overview of Telecom Network
and Digital SPC SwitchTelecommunication network is composed by the telecom terminals and service provision points connected to switches via the transmission system. Switch is the core or hinge of the telecommunication network.
Telecommunication network
telecom terminals
transmission system
switches
![Page 19: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/19.jpg)
23/4/1723/4/17 1923/4/17 1923/4/17 19
Telecom Network Types and Topology Structure
According to service types
telephone networks
telegraph networks
fax networks
CATV networks
data networks
ISDN networks
![Page 20: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/20.jpg)
23/4/1723/4/17 2023/4/17 2023/4/17 20
According to signal forms
analog networks
data networks
mixed networks
![Page 21: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/21.jpg)
23/4/1723/4/17 2123/4/17 2123/4/17 21
telecom networks
bearer network
switching networks
supporting networks
According to the usage
![Page 22: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/22.jpg)
23/4/1723/4/17 2223/4/17 2223/4/17 22
Manage network
Synchronous networks
Signaling network
Switching networks
Bearer network
Supporting networks
Basic network
OMC
NMC OMC
OMC
![Page 23: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/23.jpg)
23/4/1723/4/17 2323/4/17 2323/4/17 23
According to network topology
meshed networks
star networks
compound networks
tree networks
chain networks
loop networks
bus networks
p3
![Page 24: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/24.jpg)
23/4/1723/4/17 2423/4/17 2423/4/17 24
non-hierarchical networks
According to network levels
hierarchical networks
![Page 25: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/25.jpg)
23/4/1723/4/17 2523/4/17 2523/4/17 25
(A big area)
((B big area)
Local network
Toll netwo
rk
International office
Level-1 switching center (C1)
Tandem office (TM))Terminal office
(C5)
Backbone route
Low call loss route
High-efficiency direct route
Fig. 1.1.5-1 Structure of the telephone network in China
Level-2 switching center (C2)Level-3 switching center (C3)Level-4 switching center (C4)
![Page 26: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/26.jpg)
23/4/1723/4/17 2623/4/17 2623/4/17 26
Numbering system Telephone switching is a process to implement link connection according to addressing signals (dialing tone, number, occupancy, ringing, etc.) so that signal channels will be set up between subscribers in the telephone-switching network.
To enable the switching system to correctly and effectively select routes and called terminals, a reasonable numbering system is necessary.
Basic requirements for the number system are: unified numbering globally, minimum digits, regular numbering and convenience for upgrading and expansion.
![Page 27: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/27.jpg)
23/4/1723/4/17 2723/4/17 2723/4/17 27
(1) Numbering according to national toll telephone subscribers
Toll prefix +toll area code + local telephone number (office number + subscriber number)
(2) Numbering of international toll call
International toll prefix + country code + national toll code + local telephone number
![Page 28: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/28.jpg)
23/4/1723/4/17 2823/4/17 2823/4/17 28
No. Area No. Area
1234
5
North AmericaAfrica Europe EuropeSouth America and Cuba
67890
South Pacific (Australia)
CISNorth Pacific (East
Asia)Far East and Middle East
Standby
![Page 29: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/29.jpg)
23/4/1723/4/17 2923/4/17 2923/4/17 29
(3) Local network subscriber and local network subscriber numbering
PQ (R)+ABCD, P=2~9, the range of Q, R, A, B and C is 0~9
Local network subscriber calling outer-network national subscriber
0+X1X2+PQ (R) ABCD
![Page 30: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/30.jpg)
23/4/1723/4/17 3023/4/17 3023/4/17 30
Local network subscriber calling international subscriber
00+I1I2+X1X2+PQ(R)ABCD
I1I2…indicates the country codes, and X1X2…indicates the national
area codes.
Special service numbering: 1XX. X=0~9. Ordinary special services are as listed in Table 1.1.5-2.
![Page 31: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/31.jpg)
23/4/1723/4/17 3123/4/17 3123/4/17 31
No. Special
service No. Special service
110112114117119
Police Local call fault Local call directory Timing Fire alarm
120121170174168
Instant securityWeather forecastInternational toll
automatic call charge queryIntra-network toll number
directory Information console
![Page 32: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/32.jpg)
23/4/1723/4/17 3223/4/17 3223/4/17 32
Transmission As the digital switching adopts the 4-wire switching mode, 4-wire loops will be adopted in local office connection, inter-office connection and toll connection.
In addition, the time delay of the digital switch in transmitting voice signals is longer than the analog switch, and the affects of echoes caused by 4-wire loops on the transmission quality should be taken into consideration.
![Page 33: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/33.jpg)
23/4/1723/4/17 3323/4/17 3323/4/17 33
Fixed attenuation value: local network connection and toll connection use the same tone attenuation value
Digital local end office
7dB
7dB
12dB 7dB 3dB
22dB
Fixed attenuation value mode
![Page 34: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/34.jpg)
23/4/1723/4/17 3423/4/17 3423/4/17 34
Variable attenuation value: local network connection and toll connection use respectively different attenuation values as shown in Figure (a) local network connection and (b) toll connection.
Local end
office
Toll office
7dB3.5dB
12dB 3dB
18.5dB
3.5dB
3.5dB 12dB 3dB
22dB
7dB
7dB
(a) Local (b) Toll connections
Variable attenuation value mode
Toll office
Local end
office
![Page 35: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/35.jpg)
23/4/1723/4/17 3523/4/17 3523/4/17 35
Time Division Multiplexing (TDM)
When many signals are arranged in different “positions” in the same range (time, frequency/wavelength, space, energy or other ranges) according to certain rules, the process of transmission along a single bearer is called multiplexing.
Signals multiplexed in the originating terminal are transmitted to the receiving terminal via channels and then separated into the original individual signals.
![Page 36: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/36.jpg)
23/4/1723/4/17 3623/4/17 3623/4/17 36
I=x2
x1
f1(x ·) f2(x)dx =0
The basis of multi-channel multiplexing is to use the orthogonality of signals. In mathematics, the orthogonality of signals can be expressed as:
0)2sin()2sin( 21 dttftf
![Page 37: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/37.jpg)
23/4/1723/4/17 3723/4/17 3723/4/17 37
Multiplexing
FDM
frequency Division Multiplexing
TDM
Time Division Multiplexing
WDM
Wave Division Multiplexing
SDM
Space Division Multiplexing
CDM
Code Division Multiplexing
![Page 38: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/38.jpg)
23/4/1723/4/17 3823/4/17 3823/4/17 38
f
code
f
code
f
codetime
time
time
![Page 39: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/39.jpg)
23/4/1723/4/17 3923/4/17 3923/4/17 39
FDMA TDMA CDMA
![Page 40: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/40.jpg)
23/4/1723/4/17 4023/4/17 4023/4/17 40
![Page 41: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/41.jpg)
23/4/1723/4/17 4123/4/17 4123/4/17 41
![Page 42: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/42.jpg)
23/4/1723/4/17 4223/4/17 4223/4/17 42
Digital SignalDigital Signal
DigitalDigitalsignalsignal
AnalogAnalogsignal
it is continuous or real numbers for time axes and amplitude axes
Digital signal is discrete for time axes and amplitude axes
![Page 43: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/43.jpg)
23/4/1723/4/17 4323/4/17 4323/4/17 43
P23
![Page 44: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/44.jpg)
23/4/1723/4/17 4423/4/17 4423/4/17 44
Multiplexing
Line coding
Digital transm
ission or sw
itch
Analog
Digital signals NRZHDB3
Line de-coding
De-m
ultiplexing
De-coding
Low
pass filtering
10
Digital signalsHDB3
NRZ
A/D
Low
pass filter
Sampling
Quantization
Coding
![Page 45: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/45.jpg)
23/4/1723/4/17 4523/4/17 4523/4/17 45
The conversion of analog signals to binary digital signals comprises three handling processes, sampling, quantization, and coding, which are the same as in pulse code modulation (PCM).
Differential pulse code modulation(DPCM)
Adaptive Differential pulse code modulation(ADPCM)
Delte modulation (DM)
Adaptive Delte modulation (ADM)
![Page 46: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/46.jpg)
23/4/1723/4/17 4623/4/17 4623/4/17 46
Sampling
Sampling—Discretion of Time
Sampling is to convert the analog signals with continuous time and amplitude into analog signals with discrete time and continuous amplitude.
These analog signals of the latter type are also called the pulse amplitude modulation (PAM) signals.
![Page 47: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/47.jpg)
23/4/1723/4/17 4723/4/17 4723/4/17 47
Sampling waveSampling wave
+0.3 +0.2 -0.4 +0.1 0 +0.1 -0.4 +0.2 -0.5
Nq(tNq(t)) on-offon-off
Sam
plingS
ampling
Quantizatio
Quantizatio nn
Sp(t)Sp(t)
&(t)&(t)
S(t)S(t) Sq(t)Sq(t)
Sq(t)Sq(t)
S(t)S(t)
Sp(t)Sp(t)5.3 10.2 7.6 2.1 5.0 8.1 13.6 14.2 7.5
5 10 8 2 5 8 14 14 8
&(t)&(t)
![Page 48: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/48.jpg)
23/4/1723/4/17 4823/4/17 4823/4/17 48
To ensure that PAM signals after sampling can be restored to the original signals without distortion in the receiving terminal, the sampling period should satisfy the Nyquist Theorem, which will be introduced hereafter.
Nyquist Theorem: Signal S(t) with the restricted frequency band of B Hz can be uniquely determined by sample value series with the TS= period if only fs≥2B.
![Page 49: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/49.jpg)
23/4/1723/4/17 4923/4/17 4923/4/17 49
on-offon-off
F(t)Fs(t)=f(t).s(t)
S(t)
n
tjnn
seSts )(
2
2 )sin()(
1 2
2
s
ssT
sT
s
n
ntjn
n Tdtets
TS
![Page 50: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/50.jpg)
23/4/1723/4/17 5023/4/17 5023/4/17 50
That is, to completely restore a signal from its sampling value without distortion, the sampling frequency must satisfy the following conditions:
fs≥2B(Hz), fs can also be called the Nyquist Frequency, or TS≤ a
nd Ts is called the Nyquist time interval.
In telephone communications, the voice frequency band is 300-3400Hz, and the actual sampling frequency fs is taken as 8000
Hz2B=23400Hz=6800Hz. This is to prevent the confusion of signals after sampling and enable protection zone in the spectrum.
![Page 51: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/51.jpg)
23/4/1723/4/17 5123/4/17 5123/4/17 51
125μSt
A
Cycle T= 125μS f=8kHz
![Page 52: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/52.jpg)
23/4/1723/4/17 5223/4/17 5223/4/17 52
AA
BB
CC
DD
AA
BB
CC
DD
第一帧第一帧第二帧第二帧
AABBCCDDAABBCCDD
同步同步时钟时钟
![Page 53: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/53.jpg)
23/4/1723/4/17 5323/4/17 5323/4/17 53
AA
BB
CC
DD
AA
BB
CC
DD
第一帧第一帧第二帧第二帧
AABBCCDDAABBCCDD
同步同步时钟时钟
![Page 54: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/54.jpg)
23/4/1723/4/17 5423/4/17 5423/4/17 54
AA
BB
CC
DD
AA
BB
CC
DD
第一帧第一帧第二帧第二帧
AABBCCDDAABBCCDD
同步同步时钟时钟
![Page 55: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/55.jpg)
23/4/1723/4/17 5523/4/17 5523/4/17 55
D1(t)D1(t)
D2(t)D2(t)
D3(t)D3(t)
D4(t)D4(t)
DM(t)DM(t)
TDM
![Page 56: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/56.jpg)
23/4/1723/4/17 5623/4/17 5623/4/17 56
Sampling is to convert the analog signals with continuous time and amplitude into analog signals with discrete time and continuous amplitude.
![Page 57: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/57.jpg)
23/4/1723/4/17 5723/4/17 5723/4/17 57
Quantization Quantization is to discrete (or quantify) the continuous amplitude of sample values and convert the analog PAM signals with continuous amplitude into multi-system digital signals.
As ordinary digital communication systems and computers all adopt binary signals, multi-system digital signals are processed with binary coding to be converted in to binary digital signals.
As is described above, the sample value series after sampling are still analog PAM signals. To transmit the signals in the digital mode, the amplitude of PAM signals must be discrete.
![Page 58: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/58.jpg)
23/4/1723/4/17 5823/4/17 5823/4/17 58
A 3.8 5.9 3.2 1.1 2.6 4.6 6.2 5.3 2.5
Q 3.5 5.5 3.5 1.5 2.5 4.5 6.5 5.5 2.5
0.3 0.4 -0.3 -0.4 0.1 0.1 -0.3 -0.2 0
S/N 12.6 14.8 3.6 2.8 26 2646 20.6 26.5
![Page 59: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/59.jpg)
23/4/1723/4/17 5923/4/17 5923/4/17 59
the process of quantization is to round up the amplitude values of analog sampling signals. Obviously, the round up processing might cause certain errors, which is the so-called “Quantization Error”. The quantization error will ause some noises in human ears, which are normally called the quantization noise.
Quantization is normally of two types, even and non-even quantization.
Even quantization divides the quantization range evenly, i.e., quantization is implemented by adopting the equal quantization hierarchy distance.
![Page 60: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/60.jpg)
23/4/1723/4/17 6023/4/17 6023/4/17 60
![Page 61: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/61.jpg)
23/4/1723/4/17 6123/4/17 6123/4/17 61
An important index affecting communication quality is the SNR (Signal-To-Noise Ratio).
For even quantization, SNR for small signals will be obviously more than that SNR for big signals.
This will cause the redundancy of SNR for big signals and shortage of SNR for small signals.
To overcome the problem with even quantization, non-even quantization is adopted in the quantization process of voice sampling in actual communications.
That is, different quantization distances are adopted for different signals to enable that small and big quantization distances can be adopted for small and big signals respectively. This will ensure similar SNR for big and small signals. The principle of realizing the non-even quantization is as shown in Fig.
![Page 62: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/62.jpg)
23/4/1723/4/17 6223/4/17 6223/4/17 62
even quantization
![Page 63: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/63.jpg)
23/4/1723/4/17 6323/4/17 6323/4/17 63
No-even quantization
![Page 64: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/64.jpg)
23/4/1723/4/17 6423/4/17 6423/4/17 64
A/D D/AInput signal
Compressed digital bit
flow^Y( t)Compres
s Even PCM coder
Even PCM decoder
Expand
Fig. 1.3.2-1 Compress and extend PCM transmission system
Output signalY
( t)
![Page 65: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/65.jpg)
23/4/1723/4/17 6523/4/17 6523/4/17 65
In this process, the realization of the non-even quantization in the transmitting side is to convert signal S(t) via a compressor with non-linear features.
This will expand small signals and compress big signals to get the compressed signals. These signals are then quantized via an even quantizer, which is equal to the non-even quantization for signals after sampling.
In the receiving side, signals after quantization are processed via an expander, which has the opposite features to the compressor. Small signals are compressed and big signals are expanded. The original PAM signals will be restored.
![Page 66: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/66.jpg)
23/4/1723/4/17 6623/4/17 6623/4/17 66
It should be noted that the quantization process is a non-reversible process. That is, the quantization process will unavoidably introduce the above-mentioned quantization error, and the error will not be deleted via non-reversal.
Ordinary compression features are A-law (A=87.6) (adopted in Europe and China) and -law (=255) (adopted in North America and Japan). Both are logarithm compression laws.
For the Law companding rule,
Y= ln(1+x)
ln(1+) SGNx -1≤ x≤ 1
![Page 67: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/67.jpg)
23/4/1723/4/17 6723/4/17 6723/4/17 67
SGNx =
1 X>0
0 X=0
-1 X<0
where SGN is the symbol value of x, i.e.,
![Page 68: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/68.jpg)
23/4/1723/4/17 6823/4/17 6823/4/17 68
40
0
5
15
40
100
=255
Output
1.0
1.0
Input
Figure 1.3.2-2 µ-law characteristics
![Page 69: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/69.jpg)
23/4/1723/4/17 6923/4/17 6923/4/17 69
For the companding law A, we have:
Y= 1+lnAx
1+lnA SGNx, 1A ≤ x≤ 1
Y=Ax
1+lnA SGNx, 0≤ x≤1A
![Page 70: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/70.jpg)
23/4/1723/4/17 7023/4/17 7023/4/17 70
Output
1.0
1.0 Input
A=87.6
A=65
A=1
Figure 1.3.2-3 A-law characteristics
![Page 71: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/71.jpg)
23/4/1723/4/17 7123/4/17 7123/4/17 71
Coding /decoding using Law A 13-broken-line method
The realization of the above continuous companding requires infinite quantizing levels, thus impossible.
Instead, usually the digital circuit segmenting is used to compand signals.
This is not only easier, but low in costs. Law A compressing uses the 13-broken-line method. Table 1.3.3-1 lists the slopes of each segment of the 13-broken-line method and the Law A compressing method.
![Page 72: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/72.jpg)
23/4/1723/4/17 7223/4/17 7223/4/17 72
Y
17/8
6/8
5/8
4/8
1X
1/21/41/81/16
Figure 1.3.3-1 13-broken-line segment diagram
-
-
-
-
11
12
- -
![Page 73: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/73.jpg)
23/4/1723/4/17 7323/4/17 7323/4/17 73
13-broken-line segment diagram
INput
OUTput
![Page 74: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/74.jpg)
23/4/1723/4/17 7423/4/17 7423/4/17 74
broken.doc
![Page 75: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/75.jpg)
23/4/1723/4/17 7523/4/17 7523/4/17 75
The 13- broken-line law A compressing coding rules:
1) A signal sample can be positive or negative, which shall be indicated by a bit. This bit is called the polarity bit. “1” indicates the positive polarity, and “0” indicates the negative.
2) The 13-line compressing law has 8 segments in phase I. All segments have different slopes, so 3 bits are needed to indicate 8 different segments, and they are called the segment bits. They also indicate the initial level of each segment.
![Page 76: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/76.jpg)
23/4/1723/4/17 7623/4/17 7623/4/17 76
3) In each segment there are evenly distributed 16 sub-segments. As the lengths of segments are different from each other, after even distribution, the length of sub-segment of different segments is also different. Assuming that a division of the first segment is the minimum even quantizing a quantum value . Then in segments 1—8, each sub-segment shall have △1△ ,…, 64△ , as shown in Table 1.3.3-2.
![Page 77: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/77.jpg)
23/4/1723/4/17 7723/4/17 7723/4/17 77
No. for each segment
1 2 3 4 5 6 7 8
Each segment length
16 16 32 64 128 256 512 1024
Uniform quantizing level in each segment
△ △ 2△ 4△ 8△ 16△ 32△ 64△
![Page 78: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/78.jpg)
23/4/1723/4/17 7823/4/17 7823/4/17 78
The code word format of each
voice signal sampling is as follows:
Polarity code Segment code Intra-segment code
D1 D2 D3 D4 D5 D6 D7 D8
![Page 79: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/79.jpg)
23/4/1723/4/17 7923/4/17 7923/4/17 79
If input signals have a dynamic range from -2048mv—+2048mv, then the detailed table of ranges in each segment can be obtained as shown in Table 1.3.3-1. For instance, if the encoder input quantizing signal values are +135mv and -1250mv, then according to the encoding rule and Table 1.3.3-3,
we have their coding respectively as 1 100 0000 and 0 111 0011. There are many kinds of PCM encoders, but usually the step by step feedback comparison encoder is used.
table1.doc
![Page 80: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/80.jpg)
23/4/1723/4/17 8023/4/17 8023/4/17 80
Decoding To restore digital signals into the original analog signals, digital signals should be decoded and filtered.
Decoding is the reverse process of coding.
It is to convert the received PCM coding signals into the quantization signals, which is as in the transmitting side.
This needs the calculation of the original quantization value (absolute value) according to the quantization distance value in correspondence to the field code in the code group as well as the section serial number value in correspondence to the 4-digit intra-field code.
![Page 81: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/81.jpg)
23/4/1723/4/17 8123/4/17 8123/4/17 81
For example1 received code is
1 100 0000
Polarity code 1 represents positivesignal.
Field code 100 indicates in 4th section, that is 128
![Page 82: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/82.jpg)
23/4/1723/4/17 8223/4/17 8223/4/17 82
![Page 83: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/83.jpg)
23/4/1723/4/17 8323/4/17 8323/4/17 83
The decoder outputs a staircase quantization signal, which can be converted smoothly into an analog signal by filtering the high-frequency weight.
The digitization of analog signals (or the analog/digital conversion (A/D)) and the reversed process (normally called the digital/analog (D/A) conversion) can be implemented according to the above procedures, and the A/D conversion is enabled by three processing modes simultaneously. With the development of large-scale integration technologies, the above processing (including A/D and D/A) are integrated on a special single-channel PCM transcoding chip, which can be Intel2914, TP3067 or MC145567.
![Page 84: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/84.jpg)
23/4/1723/4/17 8423/4/17 8423/4/17 84
PCM primary format The PCM primary system is the basic system for digital multiplexing.
It consists of 30 voice channels, and its primary frame structure contains 32 time slots. 30 channel TS plus two TS for synchronization and signaling respectively.
TS0 normally serves as the frame synchronization TS and TS16 serves as the signaling TS.
![Page 85: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/85.jpg)
23/4/1723/4/17 8523/4/17 8523/4/17 85
Signaling
timeslot
Frame length 125μs
Time slot
0 1-15 16 17-30 31
Time slot length 3.9μs
Frame synchronization word
Polarity code Segment code Intra-segment code
e 段内码
D1
D2
D3
D4
D5
D6
D7
D8
D1
D2
D3
D4
D5
D5
D7
D8
![Page 86: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/86.jpg)
23/4/1723/4/17 8623/4/17 8623/4/17 86
As there is only 8bit signaling information in 30 channels, the multi-frame structure is normally adopted.
Each multi-frame is composed by 16 single frames. Each channel can be allocated with 4 information bits in 2ms, and the signaling rate will be 2Kb/s, which is the information bit of channel associated signaling in the 30/32PCM multi-frame structure.
The basic formats of multi-frame and single-frame of PCM30/32 are as shown in Fig. 1.3.4-1.
![Page 87: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/87.jpg)
23/4/1723/4/17 8723/4/17 8723/4/17 87
16 frame,125 s 16=2ms
F0 F15
0 1 15 16 17 30 31
32TS,256bit,125s,1 frame
Reserved for the international
(now fixed as 1)
Synchronization TS
Channel TS TS1-TS15 Channel TS TS17-TS31
F0
Frame synchronizationcode
偶帧
D1 D2 D3 D4 D5 D6 D7 D8Even frame
Odd frame
Loss of frame opposite alarm
code
F1 a b c d a b c d
Channel 16 signaling code
Channel 1 signaling code
1 1 A1 1 1 1 1 1
Reserved for the international
(now fixed as 1)
F15 a b c d a b c d
Synchronization: A1=0; A2=0Out of frame: A1=1; A2=1
Fig.1.3.4-1 Frame structure of PCM30/32
1 0 0 1 1 0 1 1 0 0 0 0 1 A2 1 1
Multi-frame synchronization code
Multi-frame synchronization code
Channel 15 signaling code
Channel 30 signaling code
![Page 88: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/88.jpg)
23/4/1723/4/17 8823/4/17 8823/4/17 88
As is shown in the figure, in the 125s sampling period, each channel sends the 8bit voice code group for one time by turn, and each channel occupies one TS.
30 channels and the synchronization and signaling TSs form a single frame.
TS0 is used to transmit frame synchronization codes, and TS16 is used to transmit signaling codes of the channels (e.g. occupation, called subscriber pick-up, calling subscriber hang-up, forced disconnection, etc.).
In a single frame, featuring data of a PCM 30-channel system is as follows:
![Page 89: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/89.jpg)
23/4/1723/4/17 8923/4/17 8923/4/17 89
In a single frame, the characteristic data of the 30-channel PCM system is as follows:
Voice frequency band 300-3400Hz
Sampling frequency 8000Hz
Frame cycle 125s
Coded bits for each sample value 8bit
Rate per channel 64kb/s
Time slot No. in each frame 32
Bits in each frame 256
Channels in each frame 30
![Page 90: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/90.jpg)
23/4/1723/4/17 9023/4/17 9023/4/17 90
Duration of each time slot 3.9s
Bit duration 0.488s
Total data rate 2.048Mb/s
Compressing law Law A A=87.6
Signaling capacity
channel associated signaling 2Kb/s
common channel signaling 64Kb/s
![Page 91: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/91.jpg)
23/4/1723/4/17 9123/4/17 9123/4/17 91
In a multi-frame, the 30-channel PCM system shall have the following characteristic data :
Multi-frame frequency 500Hz
Multi-frame cycle 2ms (0.125mS x 16=2mS)
Time slots in each multi-frame 3216=512
Bits in each multi-frame 25616=4096
512*8=4096
![Page 92: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/92.jpg)
23/4/1723/4/17 9223/4/17 9223/4/17 92
Line coding
The main purposes of line coding are listed as follows:
To match sent signals well with the channel;
To easily extract the clock signal;
To eliminate DC, and both the high and low frequency components shall be as small as possible; and
To introduce error detection, and limit the error code increments.
![Page 93: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/93.jpg)
23/4/1723/4/17 9323/4/17 9323/4/17 93
In a digital switch, there are two commonly used line codes: AMI(alternate mark inversion) and HDB3(3-order high density bi-polarity code).
Previous “V” code polarity
Numbers of “1” in last substitution
Even Odd
V+ 000V- B-00V-
V- 000V+ B+00V+
![Page 94: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/94.jpg)
23/4/1723/4/17 9423/4/17 9423/4/17 94
AMI code waveform
Binary code
NRZ
AMI
t
t
1 0 0 0 1 0 1 1 0 0 0 0 1(a)
(b)
(c)
Average is 0 for AMI code
![Page 95: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/95.jpg)
23/4/1723/4/17 9523/4/17 9523/4/17 95
When there are less than or equal to 3 “0”, they shall be converted in the AMI rule. That is, use 0 to indicate “0” , and +1 or –1 to indicate “1” , with +1 and –1 coming alternatively.
When four continuous “0” come out, they shall be replaced with B00V or 000V.
![Page 96: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/96.jpg)
23/4/1723/4/17 9623/4/17 9623/4/17 96
图 1.3.5-3 AMI 码和 HDB 码的功率谱
1 0 0 0 0 1 0 1 0 0 0 0 0 0 1
原 二 进 数据 +1 0 0 0 0 -1 0 +1 0 0 0 0 0 0
-1
t
AMI
图 1.3.5-2 HDB3 码编码波形
1.0
0.5 1.0fT
HDB3
AMI
p
HDB3
t +1 0 0 0 +1 -1 0 +1 -1 0 0 -1 0 0 +1
V码
B码
![Page 97: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/97.jpg)
23/4/1723/4/17 9723/4/17 9723/4/17 97
码型示意图
0 1 0 0 1 0 0 0 0 0 1 0 0 1 0 0 0 0 1 1 1 0 0 0 0 0 1 0原 码
NRZ 码
AMI 码
HDB3 码
0 0 0 V- B4 0 0 V+ 0 0 0 V-
negative
positive
![Page 98: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/98.jpg)
23/4/1723/4/17 9823/4/17 9823/4/17 98
Primary groups consist of 30 PCM HWs of voice signals at the rate of 64Kb/s added by the digital multiplexer shown in Figure 1.2.3-1 with the synchronization and signaling information.
1CH64Kb/s
24CH1.554Mb/s
96CH6.321Mb/s
672CH44.736Mb/s
4032CH274.176
Mb/s
480CH32.064Mb/s
1440CH97.728Mb/s
5760CH397.2Mb/s
( North America )
( Japan )
30CH2.048Mb/s
120CH8.448Mb/s
480CH34.368Mb/s
1920CH139.264
Mb/s
7680CH565.992
Mb/s( Europe, China )
7 6
24
G.723 G.734
G.743G.746
30
5
4
3 4
4 4 4
G.752 G.752
G.732 G.742 G.751 G.751 ( order-5 group )G.735 G.744 G.753 G.754G.736 G.745 ( order-3 group ) ( order-4 group )G.737 ( order-2 group )(order-1 group )
Figure 1.2.3-3 CCITT PDH structure
G.752
Order-0 group
![Page 99: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/99.jpg)
23/4/1723/4/17 9923/4/17 9923/4/17 99
So the 30/32-PCM signals are often called the primary signals.
The primary multiplexer/demultiplexer consists of the voice frequency unit, the receiver/sender timing synchronization unit, the logical receiver/sender unit and the interface unit. The interface unit converts the 2.048Mb/s NRZ codes into the HDB3 codes for output. And the received HDB3 codes are converted into the NRZ codes and then sent to the receiving logic. The 2.048Mb/s(often called the E1 rate) primary frame format is shown in Figure 1.2.3-2.
![Page 100: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/100.jpg)
23/4/1723/4/17 10023/4/17 10023/4/17 100
Besides the above primary (first order) groups, there are even higher order digital multiplexing groups: second order, third order, and fourth order groups.
In these groups, each tributary signal comes from a different signal source controlled by a different crystal oscillator. In the transmission network, the clock at each node is independent from others.
In the transmission network, the clock at each node is independent from others. The accuracy of frequencies can have a small deviation within a given nominal value range. Though they have the same nominal bit rate, they are not accurately synchronized.
So they are called quasi-synchronization signals.
![Page 101: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/101.jpg)
23/4/1723/4/17 10123/4/17 10123/4/17 101
PDHThe digital multiplexing groups they have formed are called the plesiochronous digital hierarchy (PDH).
The PDH structure recommended by CCITT is as shown in Figure 1.2.3-3.
![Page 102: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/102.jpg)
23/4/1723/4/17 10223/4/17 10223/4/17 102
140Mb/sLine
terminating equipment
140
34
34
8
8 8
2 2
34Mb/s
8Mb/s
2Mb/s
Figure 1.2.3-4 CCITT PDH ADM
2Mb/s
140Mb/sLine
terminating equipment
140
34
34
8
E2/E1
E3/E2
E4/E3
![Page 103: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/103.jpg)
23/4/1723/4/17 10323/4/17 10323/4/17 103
Besides, the capacity of network management is very limited. Finally, as the European and American systems are not compatible, this brings a lot of inconvenience to international interconnection.
To solve the above problem, America has developed the synchronization fiber optic network (SONET). On basis of SONET, CCITT has laid down new standards for the synchronous digital hierarchy (SDH) in 1988, and published the recommendations G.707, G.708 and G.709. In 1990, a revision was made on the 1988 version.
![Page 104: [1] Fundamental of Telecommunic](https://reader030.vdocument.in/reader030/viewer/2022032623/55cf9a64550346d033a1825f/html5/thumbnails/104.jpg)
23/4/1723/4/17 10423/4/17 10423/4/17 104
SDH is based on the complete network clock synchronization. Its transmission capacity is divided into the two parts of bearer and overhead. The main purpose of overhead is for network management and bearer alignment.
The first level of SDH (corresponding to the synchronization transfer mode STM-1) has a bit rate of 155.520Mb/s. The two levels stipulated below are respectively STM-4(622.080Mb/s) and STM-16(2488.32Mb/s), which have reflected the achievements and future trends of the rapid development of the high bit rate and large capacity fiber optic communication.