'��!!�;;: 1�-t��:
A2-5
RechargeableBattery w/ Meter
Up to 15 HoursPlay Time
BatterySwitch
SlideSwitch
FrequencyResponse
55Hz-22kHz(+/-3dB)
Front Ports
Optimized For ExtendedLow-Frequency Response
Magnetic Shielding
Eliminates Interference WithOther Electronic Equipment
Accessories
AC Cord, AC Adaptor,DC Cord For The Car, Owner's Manual
Bluetooth
Yes
USB
ChargingOnly
One XLR, Two 1/4" TRS Two 1/4" TRS
Other Features
Channel 2
Level, Mute, EFX/AUXSend Level & PAD Select
Channel 1
Gain, Mute, Phase, EFX/AUX Send LevelEFX/AUX & Mic/Instr Select, Notch Filter, EQ
Channel 3/4
Level Knob &EFX Send Level
Master
Volume Knob & Equalizer (Low Freq Knob, Mid Freq Knob, High Freq Knob), Effect Mix, Decay/Rate, Effects Program Select
Controls
PowerSwitch
Yes
MasterIndicators
Signal Clipand Power
Auxiliary In
Level Knob
Woofer
51/4”
Power Supply
DC 12V
Current Draw Power
2000 mA
Built-InPole-Mount
35mm ReceptacleOn Bottom Of Unit
Dimension WeightTweeter
1” 30W
Amplifier
Class DBi-AMP
SpecificationsControls
Channel 1 & 2*Stereo Inputs Nominal OutputLevel (1kHz) Channel 3/4
Right ChannelLink Out : -10 dBu
Input & Output Connectors
AuxiliaryIn Jack Power
DC Jack In
Main & Direct Outputs
Footswitch &AUX Send & Return
One 1/4” TRSTwo XLR(Left/Right)
One 1/4” TRS Two 1/4” TRS
Live-Performance Studio Monitor with4 Channels, Mixer, Effects, and Bluetooth®
www.EliteAcoustics.com | Los Angeles, CA | [email protected]
9”L x 9”W x 14.5”H 22 lbs.
Elite Acoustics' A2-5 Live-Performance Studio Monitor with Mixer, Effects, and Bluetooth features:4 input channels and integrated Digital Effects with an efficient Class D bi-amp driving a 5 1/4" woofer and 1 inch silk-dome tweeter to deliver maximum clarity. The Mastering section contains a 3-band EQ, Master Volume and stereo AUX input with level control. Switchable Direct Out or line-level monitoring outputs are provided for daisy chaining to additional powered speakers. A2-5 preserves the stereo outputs thereby allowing true stereo playback when integrated with additional speakers. The cabinet is constructed from solid MDF to ensure durability and high fidelity sound, and contains an integrated pole-cup. A2-5 utilizes a metal chassis with panel-mounted POTs/Jacks. The included charger doubles as a power supply for non-battery powered operation. A2-5 can also be powered and charged from a car (charger included) and once fully charged, the speaker can provide 15 hours of playing time.
Built-in overcharge/over-drain circuits protect the battery to maximize battery life.Designed and assembled in USA.
Main/DirectOutput : +4 dBu
*Channel 2 contains only one 1/4” trs phone type**Due to continous development & improvements of our products, features specifications are
subject to change without notice. All weights & measures are approximate.
1/4” Left/Right Input
1/8”
Output LevelMonitorRight Output
Main OutputsCHAN 1/2Direct Output
+48V
Left Right
CHAN 1 CHAN 2 CHAN 3/4
Connect DisconnectBattery Switch
On
Off
PowerDC INPUT
12VDC 2A
FootswitchTIP - EFX Bypass
Serial NumberDesigned, Assembled, & Tested
in California, USA
Charge Only
Mute
EFX/AUXSend Level
EFX/AUXSend Level
EFX AUX Phase EFX AUX
PAD
Mute
EFX Level
Left (Mono)
Right
AUX Send
AUX Return
Level
PAD
Line
InstrMic/Line
Instrument Line Mic 1 Mic 2
Gain60501020
INSTR
Gain305010-10
3 2 1 Low ChargeBattery Level
High-10 +10
Mid-10 +10
Mid Frequency250 5k
Low-10 +10
Notch Filter-10 +10
Frequency100 450
For Maximum Battery Life- Recharge after every use- Use & recharge battery at least once a month- Do not leave power switch in the “ON” position when it is not in use- Keep unit in a cool, dry place away from extreme temperatures- Do not service, modify, or replace the battery- If the battery fails to charge, contact Elite Acoustics
WARNINGOnly exchange the original speaker system battery with a genuine Elite Acoustics Engineering replacement. Elite Acoustics Engineering cannot guarantee the safety and compatibility of batteries from other manufactures for the use in operating the speaker system. Use of an uncertified battery may void all warranties.
www.eliteacoustics.com
Battery Switch- Connect - to enable battery power- Disconnect - to disable battery power