Model: AC Top Drives
Serial #: N/AMar. 28, 2014
Product Bulletin # TDS-139
PanelView Unit Replacement(Standalone Top Drive System)
IssueAllen Bradley no longer manufactures the following Human Machine Interface (HMI) screen models:
• PanelView 1000
• PanelView Plus 1250 with Remote I/O Communication.
Damaged units used in a standalone top drive must be upgraded to the more recent PanelView Plus 6
1250 model. Follow the steps below to identify the existing unit and select the parts required to complete
the upgrade.
Refer to the diagram on Figure 5 on page 6 for additional information.
RequirementsThe new screen will be shipped already programmed, therefore the following information is required.
1. Send to RigLine Support 24/7™ the following:
• Top drive serial number
• PLC program running the top drive
Ordering the new PanelView Unit2. Order the required new PanelView Plus 6 1250 unit listed below.
Table 1: PanelView Plus 6 1250
Qty Part Number Description
1 AY18938 PanelView Plus 6 1250
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
1 of 6
Model: AC Top Drives
Serial #: N/AMar. 28, 2014
Identifying Existing PanelView Model3. What color is the bezel of the existing PanelView unit?
a. Black (labeled PanelView 1000). See Figure 1 below.
Figure 1: PanelView 1000
When replacing a PanelView 1000 order the following parts:
Continue to “Identifying Installed Processor” on page 4.
Table 2: Power Supply and Mounting Hardware
Qty Part Number Description
1 E11409 Power Supply 24 VDC
1 E11337 DIN Rail, 4”
2 RH-P-10-32-0050-SS 10-32 Screws
2 LW-10-ET-SS Lock Washers
2 E16-1102-010 End Brackets
2 LN-10-32 Lock Nuts
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
2 of 6
Model: AC Top Drives
Serial #: N/AMar. 28, 2014
b. Gray (labeled PanelView Plus 1250). See Figure 2 below.
Figure 2: PanelView Plus 1250
Figure 3: Back view of HMI Displays
If the existing unit is a PanelView Plus 1250 (display on the left on Figure 3) continue to “Identifying
Installed Processor” on page 4.
If the existing unit is a PanelView Plus 6 1250, part number AY18938 (display on the right on
Figure 3) the procedure is complete. No additional parts are required.
PanelView Plus 1250 PanelView Plus 6 1250Two modules in the back Only one module in the back
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
3 of 6
Model: AC Top Drives
Serial #: N/AMar. 28, 2014
Identifying Installed ProcessorThe processor SLC 5/03 will not work with the new PanelView Plus 6 1250, therefore a new processor
must be ordered. Follow the steps below to identify if a new processor is required:
4. What processor is installed?
a. SLC 5/03
Figure 4: SLC 5/03 Processor
When replacing a SLC 5/03 processor unit order the following parts:
Continue to “Selecting Required Cable Kit” on page 5.
b. SLC 5/05
No extra parts required. Continue to “Selecting Required Cable Kit” on page 5.
Table 3: SLC 5/05 Processor
Qty Part Number Description
1 N10150 SLC 5/05 Processor
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
4 of 6
Model: AC Top Drives
Serial #: N/AMar. 28, 2014
Selecting Required Cable KitThe location of the building that contains the processor determines the length of the required cable kit:
5. Where is the building (with the processor) installed?
a. On the ground
Order the following kit:
The procedure is complete.
b. On the rig’s deck
The procedure is complete.
Table 4: 265’ Cable Kit
Qty Part Number Description
1 AY20104-265Kit, Cable, PV1250 Plus 6
upgrade. w/265' Cable
Table 5: 160’ Cable Kit
Qty Part Number Description
1 AY20104-160Kit, Cable, PV1250 Plus 6
upgrade. w/160' Cable
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
5 of 6
Model: AC Top Drives
Serial #: N/AMar. 28, 2014
Figure 5: Procedure Flowchart
1. TOP DRIVE SERIAL NUMBER2. PLC PROGRAM
ORDER NEWPANELVIEW PLUS 6 1250AY18938
WHATCOLOR
IS THE BEZELOF EXISTING
UNIT?
SLC 5/03
ORDERE11409E11337RH-P-10-32-0050-SSLW-10-ET-SSE16-1102-010LN-10-32
SLC 5/05
WHAT MODELIS THE
PROCESSOR?
BLACK
GRAY
ORDER SLC 5/05N10150
WHERE ISTHE BUILDING
LOCATED?
ORDER 160-FT CABLE KITAY-20104-160
ORDER 265-FT CABLE KITAY-20104-265
PANELVIEW 1000
PANELVIEWPLUS 1250WITH RIO
RIG’S DECK
GROUND
SEND TO RIGLINE SUPPORT 24/7™:
RigLine 24/7™ Support Line: 866.433.4345 | International: +1 281.774.5649 | Fax: 281.774.1940 | E-mail: [email protected]
Document ID 14-033 v 1.0 | Copyright © 2014 Canrig Drilling Technology Ltd. All rights reserved.
6 of 6