Download - 1523 Needle-Sensor
1523 Needle-Sensor
Product description
The needle sensor is used to automatically measure thedosing needle in X, Y, and Z. via a laser sensors class 2.Needle diameters from 0.4 mm to 5 mm can be used.After the needle has been measured, the softwareDiSoft carries out an offset correction in the dispensing program.
axiss Achsen-und Dosiersysteme GmbHFelix-Wankel-Str. 3 75210 Keltern-Dietlingen
Telefon +49 (0)7236 981401Fax +49 (0)7236 981402www.axiss.de - [email protected]
Technical description
- Dimensions: 60 x 60 x 34 mm- Operating voltage 12…30V DC- Load current max. 200 mA per output, short-circuit proof- Output 2xPNP-NO- Optical feedback LED yellow- Voltage drop Max. 2.5 V per output at 200 mA- Current consumption max. 50 mA- Operating temperature -10 ...+ 50 ° C- IP degree of protection IP65- Laser transmission light red light, 650 nm, class 2- Switching frequency 1 kHz- Resolution 0.2 mm- Reproducibility 0.01 mm- Housing material aluminum (AL)
Wiring diagram:
