1
2008 Engineering Technology Education Bibliography
Compiled by
Marilyn A. Dyrud Oregon Institute of Technology
Introduction
The 2008 bibliography lists books, articles, and
proceedings papers related to engineering
technology education under the following
headings: administration, aerospace/aviation,
architectural, assessment, biomedical/
biotechnology, civil, computers, curriculum,
distance education, diversity, electrical/
electronics, faculty development, industrial,
industry/government/employers, information
technology instructional technology,
international, laboratories, liberal studies,
manufacturing, mechanical, nuclear, teaching
methodology, tech prep, technical
communication, and technical graphics. Five
categories–instructional technology, liberal
studies, teaching methodology, technical
communication, and technical graphics–include
listings reflecting general technical education
concerns.
Entries are listed according to area of primary
emphasis, and items that apply to two or more
academic disciplines are entered under the area of
major interest. For example, ECET-related items
are included under ―Electrical/Electronic‖;
mechatronics papers are listed under
―Mechanical.‖ We apologize for any entries that
may have been missed or inadvertently placed in
the wrong category.
Contributors
Engineering technology educators interested in
being a contributor to the bibliography may
contact Marilyn A. Dyrud, Communication
Department, Oregon Institute of Technology,
3201 Campus Drive, Klamath Falls, OR 97601;
email: [email protected]; phone:
541.885.1504.
Abbreviations
ACP ASEE 2008 Annual Conference
Proceedings, June 22-25, 2008, Pittsburgh,
Pennsylvania. Proceedings are available on CD or
at http://www.asee.org/conferences.
ASME Proceedings of the 2008 ASME
International Mechanical Engineering Congress
& Exposition, October 31-November 6, 2008,
Boston, Massachusetts. Proceedings are available
at
http://www.asmeconferences.org/Congress08/Tec
hnicalProgramOverview.cfm.
CIEC Proceedings of the 2008 Conference for
Industry and Education Collaboration, February
13-15, 2008, New Orleans, Louisiana.
Proceedings are available on CD.
FIE Proceedings of the 2008 Frontiers in
Education Conference, October 22-25, 2008,
Saratoga Springs, New York. Proceedings are
available on CD or at http://www.fie-
conference.org/fie2008/index.htm. WIP denotes
a ―work in progress,‖ a short summary of ongoing
research.
GSW Proceedings of the ASEE 2008 Gulf-
Southwest Section Conference, March 26-28,
2008, Albuquerque, New Mexico. Proceedings
are available on CD.
ICEE Proceedings of the 2008 International
Conference on Engineering Education, July 27-
31, 2008, Budapest, Hungary. Proceedings are
available at
http://icee2008hungary.net/download/fullp/index.
html.
2
INTERTECH Proceedings of the
International Conference on Engineering and
Technology Education. March 2-5, 2008, Peruibe
and Santos, Brazil. Proceedings are available on
CD.
IJME Proceedings of the 2008 IAJC-IJME
International Conference, November 17-19,
2008, Nashville, Tennessee. Proceedings are
available at
http://www.ijme.us/IJME_Conference_2008/prog
ram.htm.
IL/IN Proceedings of the ASEE 2008 Illinois-
Indiana Section Conference, April 3-5, 2008,
Terre Haute, Indiana. Proceedings are available
at
http://ilin.asee.org/Conference2008/Author.html.
NC Proceedings of the ASEE 2008 North
Central Section Conference, March 28-29, 2008,
Dayton, Ohio. Proceedings are available at
http://www.engineering.wright.edu/~asee/Agenda
.htm.
NMW Proceedings of the ASEE 2008 North
Midwest Section Conference, October 16-18,
2008, Platteville, Wisconsin. Proceedings are
available at
http://www.ndsu.nodak.edu/asee/conferences/200
8/.
PSW Proceedings of the ASEE 2008 Pacific
Southwest Section Conference, March 27-28,
2008, Flagstaff, Arizona. Proceedings are
available at
http://www.asee.org/activities/organizations/secti
ons/proceedings/PacificSouthwest/2008.cfm.
SEE Proceedings of the ASEE 2008
Southeastern Section Conference, April 6-8,
2008, Memphis, Tennessee. Proceedings are
available on CD or at
http://www.icee.usm.edu/icee/conferences/Confer
ence%20Files/ASEE2008.
Zone Proceedings of the 2008 ASEE Zone I
Meeting, March 26-28, 2008, West Point, New
York. Proceedings are available at
http://www.asee.org/activities/organizations/zone
s/proceedings/zone1/2008Professional.cfm.
Administration
Barger, Marilyn et al. ―Florida Engineering
Technology Forum: A Vehicle for Change.‖
ACP.
Bernstein, Stuart. ―Developing an
Interdisciplinary Service Learning
Collaboration amongst University, Community
College and High School Programs.‖ CIEC.
Bloom, Joel, and Kathy Kelly. ―Increasing
Enrollment of First-Time-Full-Time Freshman
(FTFTF) in STEM Majors Year Two.‖ ICEE.
Buchanan, Walter W. et al. ―Administrative and
Educational Issues in Engineering Technology
with a Global Impact.‖ INTERTECH.
Buchanan, Walter W. et al. ―Administrative and
Educational Issues in Engineering Technology
with a Global Impact–Part 2.‖ INTERTECH.
Colwell, Joy. ―Developing Tomorrow‘s
Technology Leaders: Issues Related to Master‘s
Level Technology Curriculum.‖ ACP.
Dandu, Raju, and John DeLeon. ―Kansas State‘s
Elite Scholarship Program Enhancing Lives
through Technology and Engineering.‖ ACP.
Dudeck, Kenneth, and Wieslaw Grebski. ―A New
Vision for Engineering Technology Programs
to Strengthen Recruitment and Retention.‖
ACP.
Ferrara, Irene, and Andrew Vavreck. ―Meeting
Enrollment Challenges in Engineering
Technology at Penn State Altoona.‖ ACP.
Gehrig, Bruce et al. ―A Comprehensive and
Integrated Approach to Increase Enrollments in
Engineering Technology.‖ ACP.
Genis, Vladimir, and Gerry Marekova. ―Applied
Engineering Technology Program‘s
Curriculum.‖ ACP.
Hill, Warren. ―Accreditation of Engineering
Technology Associate Degree Programs.‖ ACP.
3
Hundley, Stephen et al. ―Enhancing Engagement
in Faculty Governance.‖ ACP.
Munukutla, Lakshmi et al. ―Arizona-Texas
Consortium for Alternative and Renewable
Energy Technologies.‖ ACP.
Oh, Jung, and Beverlee Kissick. ―The Journey to
Build a 21st Century Faculty-Librarian
Relationship: A Retrospective Case Study
Reflected with Criteria 2E and J.‖ ACP.
O‘Hair, Michael T. ―New Mission Language for
the Engaged University: Learning, Discovery
and Engagement.‖ CIEC.
Reid, Kenneth, and P. K. Imbrie. ―Noncognitive
Characteristics of Incoming Engineering
Students Compared to Incoming Engineering
Technology Students: A Preliminary
Examination.‖ ACP.
Robertson, John et al. ―The Technology World Is
Changing Rapidly: Can Higher Education
Match the Pace?‖ ACP.
Rose, Andrew, and Norman Voigt. ―The Role of
Adjunct Faculty in Future Engineering
Education.‖ ACP.
Samples, Jerry. ―Leadership 103: Leadership in
Teaching and Pedagogy.‖ ACP.
Sealy, Philip. ―Rubrics to Samples of Student
Work as a Direct Measure of Individual
Outcome Achievement and Overall Program
Quality.‖ NMW.
Setoodehnia, Ali et al. ―How to Improve Student
Retention Rates in Science and Technology.‖
Zone.
Tapper, Jerome, and Francis DiBella. ―The
Development and Deployment of an
Engineering Technology Curriculum to Combat
Engineering Globalization.‖ ACP.
Verma, Alok. ―Applying Six Sigma Methodology
to the Admissions Process in Higher
Education.‖ ACP.
Weinsier, Philip, and David J. Brown.
―Engineering Technology Education: A
National Picture.‖ IJME. Paper no. 148.
Wolf, Lawrence, and Michael O‘Hair.
―Engineering Technology and the 75th
Anniversary Retrospective of ABET.‖ ACP.
Zoghi, Ban, and Walter W. Buchanan.
―Engineering Leadership: An Experimental
Approach Using Emotional Intelligence.‖
INTERTECH.
Aerospace/Aviation
Aungst, Josanne et al. ―Planning of Non-Routine
Work for Aircraft Scheduled Maintenance.‖
IJME. Paper no. 044.
Baloun, Katie et al. ―No Hassle Check-in of
Aircraft Customers and Baggage.‖ IJME. Paper
no. 043.
Johnson, Mary E., and Sergey Dubikovsky.
―Introduction of Lean Six Sigma Principles into
Aeronautical Engineering Technology
Courses.‖ IJME. Paper no. 047.
Morrell, Anthony J. et al. ―Development of Safety
Event Metrics for an Aviation Organization.‖
IJME. Paper no. 131.
Ropp, Timothy D. ―Implementing Safety
Management Systems for Aviation into an
Aviation Technology Curriculum.‖ IJME.
Paper no. 164.
Ropp, Timothy D., and Brian G. Dillman.
―Standardized Measures of Safety: Finding
Global Common Ground for Safety Metrics.‖
IJME. Paper no. 029.
Vlasman, Brent et al. ―Learning Aerospace
Design and Manufacturing Processes to
Demonstrate ABET Program Objectives.‖
IJME. Paper no. 048.
4
Architectural
Baznik, Gouranga. ―Employer‘s Expectations of
the Performance of CM Graduates.‖ ACP.
Cowan, Daniel. ―A Client-Based Assessment
Tool for Service Learning Projects.‖ ACP.
Cowan, David. ―Ditching Digital: The Building
of Physical Miniatures.‖ ACP.
Davis, Daniel. ―Partnering with Industry via Your
Advisory Board.‖ FIE.
Ding, Suining. ―Cognitive Mapping in Service
Learning and Civic Engagement in a Studio
Course with an ADA Accessible Project.‖ ACP.
Haque, Mohammed, and Pallib Desgupta. ―An
Architectural Walkthrough Using 3D Game
Engine.” ACP.
Haque, Mohammed E., and Pallab Dasgupta.
―Architectural/Engineering Visualization Using
Game Engine.‖ GSW.
Hsu, Kun-jung et al. ―Exploring the Eco-
Pedagogy of an Urban Eco-Tourism Hill Path
Design.‖ ACP.
Martin, Elizabeth. ―Education of the Citizen
Architect through Designing Mobile Health
Clinic Concepts.‖ IJME. Paper no. 051.
Nichols, Anne. ―Using Calibrated Peer Review as
a Teaching Tool for Structural Technology in
Architecture.‖ ACP.
Nickolson, Darrell. ―Merging ADA & LEED to
Enhance Older Adult Living: A Capstone
Project.‖ ACP.
Assessment
Anitsal, Meral. ―An Exploratory Assessment of
Distance and On-Ground Delivery of Business,
Math and Engineering Technology Courses.‖
ACP.
Balascio, Carmine et al. ―Nationally Normed
Exams for Outcomes Assessment of
Engineering Technology Programs and
Certification of Engineering Technology
Graduates.‖ ACP.
Biney, Paul et al. ―Development of Performance
Criteria for Assessing Program Outcomes in
Engineering, Engineering Technology &
Computer Science Programs.‖ ACP.
Buhl, Jakob et al. ―Assessing Impact of New
Teaching Methods by Predicting Student
Performance.‖ Zone.
Carpinelli, John et al. ―A Rubric to Evaluate
Standards-Based Lesson Plans and Students‘
Achievement of the Standards.‖ ACP.
Carson, Jon. ―Evaluation of Individual
Performance on Group Projects.‖ ACP.
Chin, Robert. ―Characterizing the Engineering
Technologists: Implications for Program
Assessment.‖ ACP.
Cottrell. ―TC2K and Classroom Assessment: The
Case for Comprehensive Course Assessment in
Sustaining Continuous Program Improvement.‖
ACP.
Cowan, David. ―A Client-Based Assessment Tool
for Service Learning Projects.‖ ACP.
Das, Nirmal. ―Assessment and Evaluation of
Engineering Technology Program Outcomes
Using Direct Measures.‖ ACP.
DeRuntz, Bruce, and Ron Meier. ―Identification
of Significant Factors and Topics for
Establishing a Standard Evaluation Instrument
for Six Sigma Black Belt Projects.‖ IJME.
Paper no. 030.
Dues, Joseph et al. ―Assessment for Continuous
Improvement: Embedding in the Culture.‖
Journal of Engineering Technology 25, no. 2
(Fall 2008): 10-17.
5
Durfee, Jason, and William Loendorf. ―Using the
National Society of Professional Engineers‘
(NSPE) Ethics Examination as an Assessment
Tool in the Engineering Technology
Curriculum.‖ ACP.
Gómez, M. Martinez. ―A Methodology to
Analyse the Student Feedback Survey of the
Polytechnic University of Valencia (UPV).‖
ICEE.
Goodson, Carole et al. ―Student Perceptions of
Academic Honesty in an Electronic Age.‖ ACP.
Higgins, Bonnie. ―Program Evaluation: Graduate
and Employer Perceptions Regarding Job
Preparedness Skills of Design Technology
Graduates.‖ IJME. Paper no. 027.
Ketkar, Mohan A., and Nripendra N. Sarker.
―Development of Performance Criteria and
Measures for Assessing Program Outcomes in
Engineering Technology Programs.‖ GSW.
Lamb, Carol, and David G. Kurtanich.
―Assessment Process–A View from the
Trenches.‖ ACP.
Lipscomb, John W., Jr. ―A Comparison of Exam
Scores between Fully Online and Lecture
Supplement Sections.‖ SEE.
Nripendra, Sarker, and Cajetan M. Akujuobi.
―Establishing Multiple Assessment Methods for
Accreditation.‖ GSW.
Pankowski, Peg. ―Assessment for Accreditation
and Beyond.‖ PSW.
Pariser, Bertram, and Cyrus Meherji. ―Data
Management for Outcomes and Assessment.‖
ACP.
Reid, K. J., and E. M. Cooney. ―Implementing
Rubrics as Part of an Assessment Plan.‖ The
International Journal of Engineering Education
24, no. 5 (2008): 893-900.
Rodriguez-Marek, Esteban et al. ―Connecting the
Dots in Assessment: From Course Student
Learning Objectives to Educational Program
Outcomes to ABET Assessment.‖ ACP.
Skvarenina, Timothy. ―Incorporating and
Assessing ABET ‗Soft Skills‘ in the Technical
Curriculum.‖ ACP.
Varma, Virendra, and Tina Varma. ―Using E-
Portfolios for Program Assessment: Some
Observations.‖ ACP.
Vavreck, Andrew et al. ―Analysis of the Results
of a Pilot Engineering and Engineering
Technology Student Inventory Survey.‖ ACP.
Wang, Jywhen et al. ―Enhancing and Assessing
Life Long Learning Skills through Capstone
Projects.‖ ACP.
Biomedical/Biotechnology
Genis, V. et al. ―Environmental Control Plasma
Educational Laboratory.‖ In Plasma Assisted
Decontamination of Biological and Chemical
Agents. Ed. Katie Gibson et al. Rotterdam:
Springer, 2008, pp. 151-8.
Kennedy, Chad E. ―Role-Playing Creates a
Valuable Interactive Learning Environment for
Biomedical Engineers and Engineering
Technologists.‖ GSW.
Kornegay, Alton L. et al. ―Biotechnology:
Gearing up to Manufacture Biofuels including
Ethanol and Biodiesel. IJME. Paper no. 012.
Sprawls, Perry. ―Evolving Models for Global
Medical Technology Education.‖ FIE.
Civil
Abaza, Hussein et al. ―Multi-Media Interactive
Self-Directed CAD Applications Learning
Modules for the Construction Management
Students.‖ ACP.
Aghayere, Abi, and Jason Vigil. Structural Steel
Design–A Practice-Oriented Approach. Upper
Saddle River, NJ: Prentice Hall, 2008.
6
Ahn, Yong Han et al. ―Integrated Sustainable
Construction: A Course in Construction for
Students in the U.S.A.‖ ACP.
Ali, Tarig, and Ali Mehrabian. ―Towards
Dynamic Land-Use Planning Using Geospatial
Technology: Conceptual Design of a
Collaborative Web-Based GIS.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Aldridge, Kevin et al. ―Automated Clay
Conditioning for Foundation (ACCF).‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Apostoaia, Radu, and Jose Pena. ―Comparative
Study of the Abrasion Resistance.‖ IL/IN.
Bandyopadhayay, Amitabha, and Bala
Veeramchenei. ―The Regional Economic
Impact of the Proposed Capital Improvement of
the South West Sewer District in Suffolk
County–A Student-Assisted Project.‖ ACP.
Banik, Gouranga. ―Industry Expectations from
New Construction Engineers and Managers:
Curriculum Improvement.‖ ACP.
Benge, Justin et al. ―Influence of Recycled
Aggregates on Mechanical Properties of High
Performance Concrete.‖ IL/IN.
Cottrell, David. ―An Introductory Materials
Course: Making Concrete Stand Up to the
Task.‖ ACP.
Das, Nirmal. ―A Case Study of Student Learning
in Civil Engineering Technology.‖ ACP.
Das, Nirmal. ―Teaching Reinforced Concrete
Design with MathCad Application.‖ ACP.
Davis, Daniel. ―Understanding Construction
Project Relationships.‖ ACP.
LeBoeuf, Richard L. et al. ―Using Concrete
Proportioning to Teach Spreadsheet Modeling.‖
The Technology Interface 9, no. 2 (Spring
2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Lambrechts, James. ―When Civil Engineering
Technology Is Elevated to Engineering, What
Can Fill the Technology Void?‖ ACP.
Leffers, M. Regina et al. ―The Center for the Built
Environment at IPFW and the Northeast
Indiana Green Build Coalition and Habitat for
Humanity Collaborate to Create a Sustainable
Residential Construction Project.‖ ACP.
Mehrabian, Ali. ―The State of the Art Analysis
and Design of Structures: Application of RISA-
3D.‖ The Technology Interface 9, no. 2 (Spring
2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Mincic, Michael. ―Transfer Success of Civil
Engineering Technology Degree Community
College Graduates to a Bachelor Degree in
Civil Engineering Technology Program.‖ ACP.
Nguyen, Thuy et al. ―Technology Skill
Assessment of Construction Students and
Professional Workers.‖ ACP.
Sener, Erdogan. ―Zero-Energy and Carbon-
Neutral Construction: Where and How to Start
Integrating the Concepts into Construction
Education.‖ IL/IN.
Shaurette, Mark. ―Implementation of Wireless
Webcam Technology for Construction
Management Field Trips.‖ ACP.
Sidharta, Sahirman et al. ―FRP Bridge Deck Life
Cycle Cost Analyzer.‖ Proceedings of the First
International Symposium on Life Cycle Civil
Engineering, July 10-14, 2008, Varenna, Lake
Como, Italy.
Varma, Virendra. ―Advances in the Production of
Shop Drawings and Their Impact on
Constructability.‖ ACP.
Vidalis, Sofia, and Joseph Cecere. ―A Model
Partnership between Penn State Harrisburg‘s
Construction Engineering Technology Program
and the Construction Industry.‖ ACP.
7
Wood, William. ―Temporary Loads during
Construction: Undergraduate Research and
Course Development.‖ ACP.
Zaneldin, Essam, and Suleiman Ashur. ―Using
Spreadsheets as a Tool in Teaching
Construction Management Concepts and
Applications.‖ ACP.
Computers
Alagun, Titilope Z., and Shahryar Darayan.
―Automated Control of Chicken Environment
and Egg Production.‖ GSW.
Allen, Gale R. ―Communications Technology
Learning Opportunities Using LabVIEW-
Controlled RF Equipment.‖ NMW.
Allen, Gale R. ― Hands-On Component-Level
Automation Courses for Technology and
Engineering Students.‖ NMW.
Basta, Alfred and Wolf Halton. Computer
Security and Penetration Testing. Clifton Park,
NY: Delmar Cengage, 2008.
Attarzadeh, Farrokh. ―Innovations in Laboratory
Development for Computer Engineering
Technology Programs.‖ The Technology
Interface 9, no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Attarzadeh, Farrokh et al. ―Assessing the
Assessments in a Computer Engineering
Technology Capstone Course.” GSW.
Attarzadeh, Farrokh et al. ―The Evolution of a
Senior Capstone Course in the Context of a
Research-Based University Quality
Enhancement Plan.‖ GSW.
Attarzadeh, Farrokh et al. ―How the Capstone
Class Students Perceive Their Knowledge
Base?‖ GSW.
Attarzadeh, Farrokh et al. ―The Role of the
Teaching Assistants in a Senior Level
Computer Engineering Technology Capstone
Class.‖ GSW.
Beasley, Jeffrey S. Networking. 2nd ed. Upper
Saddle River, NJ: Prentice Hall, 2008.
Dahlmann, Nina et al. ―Attractive Sciences–
Recruiting and Retention Activities for Women
in Academic CSET Education.‖ ACP.
Dhariwal, K. et al. The Complete Guide to
Professional Computing. Chicago: ICCP, 2008.
Duvall, Charles, and Joshua Galloway. ―Reducing
the Trial and Error Design Method of Single
Board Computer Projects via Automation of
Timing Measurement.‖ CIEC.
Evans, Jeffrey et al. ―Wireless Sensor Network
Design for Flexible Environmental
Monitoring.‖ Journal of Engineering
Technology 25, no. 1 (Spring 2008): 46-52.
Farook, Omer et al. ―Embedded System Design
with Microchip‘s 16F88 Microcontroller.‖
ACP.
Forsman, David. ―Computer Applications for
Engineers: Teaching Organizational Problem
Solving and Checking Skills to Freshmen
Engineering Technology Students.‖ ACP.
Garrett, Jeremy et al. ―Student Attitudes towards
the Use of Graphical Programming
Languages.‖ ACP.
Hacker, Thomas J. ―Eastern Michigan
University–Developing a Curriculum for High
Performance Computing and
Cyberinfrastructure Education.‖ CIEC.
Hembroff, Guy C. et al. ―Filling the Void in
Computer Education: Establishing and
Developing a Responsive Computer Network
Engineering and Security Program.‖ IJME.
Paper no. 066.
Hernandez, Juan et al. ―Network Controlled Data
Acquisition Drone.‖ GSW.
Hislop, Gregory W. ―Moving Away from an
Introductory Programming Sequence.‖ WIP.
FIE.
8
Ibrahim, Ghassan et al. ―An Experimental Pilot
Wireless Wide Area Network: A Project Based
Learning Approach in Radio Frequency
Course.‖ The Technology Interface 9, no. 2
(Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/ .
Jonassen, David et al. ―Scaffolding Collaborative
Design Online.‖ ACP.
Koontz, Warren et al. ―Incorporation of
Broadband Access Technology in a
Telecommunications Engineering Technology
Program.‖ ACP.
Li, Chengcheng et al. ―Networking Lab
Simulation Using Virtual Technologies.‖ ACP.
Li, Xiaolong. ―Development and Application of a
New Curriculum for Computer Networking.‖
CIEC.
Loker, David. ―Wireless Sensor Networks
Utilizing the IEEE 802.15 Standard in an ECET
Curriculum.‖ ACP.
Lopez, Antonio M. et al. ―Gender and Race:
Stereotyping, Coping Self-Efficacy and
Collective Self-Esteem in the CSET
Undergraduate Pipeline.‖ FIE.
Martin, Cortney et al. ―The Earth Sustainability
Course Series.‖ ACP.
Moreno, Matthew et al. ―Active Vehicle Water
Level Monitoring System.‖ GSW.
Nelson, Bill et al. Guide to Computer Forensics
and Investigations. 3rd ed. Clifton Park, NY:
Delmar Cengage, 2008.
Rio-Gutierrez, Fernando. ―New Progressive
Embedded Design Course for Engineering
Technology.‖ ACP.
Schneider, Scott. ―Using Programming Projects
in an Operating Systems Course as a Capstone
Software Engineering Experience.‖ ACP.
Sinn, Richard. Software Security Technologies.
Clifton Park, NY: Delmar Cengage, 2008.
Swain, Nikunja K. et al. ―Role of Simulation
Software in Enhancing Student Learning in
Computer Organization and Microcontroller
Courses.‖ IJME. Paper no. 135.
Ulmer, Jeffrey M. ―Intellectual Property:
Perspectives from within Corporate America
and the Law.‖ The Technology Interface 9, no.
2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Wilcox, Daren et al. ―Embedded Design in a
Sophomore Course.‖ ACP.
Yaprak, Ece, and Karen Tonso. ―Real-Time,
Embedded Systems Networking: A Novel Way
to Develop an Interactive Undergraduate
Course.‖ ACP.
Curriculum
Anderson, Robert et al. ―Using Student
Engagement Projects in an Engineering
Technology Program to Stimulate Regional
Economic Development.‖ SEE.
Anwar, Sohail, and Eric Granlund. ―Teaching
Design to First Year Engineering and
Engineering Technology Students: A Case
Study.‖ The Technology Interface 9, no. 2
(Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Attarzadeh, Farrokh et al. ―Situating a Senior
Project Course in a University QEP Research-
Based Instructional Framework.‖ IJME. Paper
no. 055.
Anwar, Sohail. ―An Innovative Undergraduate
Nanoscience Technology Program for Adult
Learners.‖ CIEC.
Barnard, Ken et al. ―Earth Day Teach-In: A
Model for Industry, Community, and Education
Collaboration.‖ ACP.
Barbieri, E., and W. Fitzgibbon.
―Transformational Paradigm for Engineering
and Engineering Technology Education.‖
IJME.
9
Beasley, Ryan. ―A New Class Covering Health
Care Technologies.‖ ACP.
Bellaver, Richard F. ―Integrating Human Factors
Research into a Communications Technology
Program.‖
ICEE.
Birch, John III et al. ―Integrating Professional
Skills into the 21st Century Engineering and
Technical Curriculum.‖ ASME. Paper no.
IMECE 2008-68811.
Buchanan, Walter W. et al. ―The Importance of
Networking and Building Relationships to
Further Development Activities in an
Engineering Technology Department at a
Public University.‖ GSW.
Buck, Jessica L., and Elizabeth McInnis. ―Beyond
the Barriers: The Incorporation of Service
Learning in Technology Programs.‖ SEE.
Craft, Elaine, and Barbara Anderegg. ―Program
Mentoring a Grant Proposal Project
Development Process for Improvement in Two-
Year College Technician Education: Lessons
Learned and Outcomes from a Pilot Project.‖
ACP.
Craft, Elaine et al. ―Innovative/Exemplary
Programs–Transforming the Classroom,
Empowering the Teacher and Enriching the
Student.‖ CIEC.
Crossman, Gary et al. ―A New Bachelor‘s
Program in Motorsports Technology.‖ ACP.
Domermuth, David. ―Innovative Changes That
Allow Graduates to Compete in the Global
Market Place.‖ CIEC.
Eppes, Tom et al. ―An Integrative Approach to
Graduate and Undergraduate Change.‖ ACP.
Evensen, H. T. et al. ―The Minor in Microsystems
and Nanotechnology at UW-Platteville.‖ NMW.
Franz, Harry. ―Comparing the Use of Commercial
Fire Alarm Control Processors and
Programmable Logic Controllers in a Safety
and Fire Program Fire Alarm System
Engineering Course.‖ ACP.
Gary, Kevin, ands Harry Koehnemann. ―The
Software Enterprise at ASU‘s Polytechnic
Campus.‖ PSW.
Genis, Vladimir et al. ―Capstone Courses for
Engineering Technology Students.‖ ACP.
Gomez-Rivas, Alberto, and George Pincus.
―Development and Implementation of a General
Course on Analysis of Engineering Networks.‖
CIEC.
Gorbet, Rob et al. ―Impact of Learning
Transformation on Performance in a Cross-
Disciplinary Project-Based Course.‖ FIE.
Harding, Gene, and Christopher A. Long.
―Improving the Curriculum via Directed
Projects or Research Using Undergraduate
Students.‖ IL/IN.
Helps, C. Richard, and Mark Patterson. ―Keeping
Technology Courses Current While Minimizing
Disruption to the Instructional Design.‖ ACP.
Horton, Karen et al. ―Virtual Preservation: A
Unique Applied Research Project in the Virgin
Islands National Park.‖ ACP.
Jablokow, Kathryn, and Danielle DeCristoforo.
―Sorting Out Creativity in Design Assessment.‖
ACP.
Karunamoorthy, Swami. ―Seven Steps to
Successful Continuous Improvement of a
Program.‖ ACP.
Khan, Saeed, and Gregory Spaulding. ―Building
the Largest Cantenna in Kansas: An
Interdisciplinary Collaboration between
Engineering Technology Programs.‖ ACP.
Klein, Peter W. ―Curriculum Innovation:
Technical Sales.‖ IJME. Paper no. 147.
Krupczak, John. ―Using Insights from Non-
Engineers to Teach How Things Work in
Introduction to Engineering.‖ NC.
10
Krupczak, John, and David Ollis. ―Technology
Courses for Undergraduates: Developing
Standard Models.‖ ACP.
Krupczak, John et al. ―A Framework for
Developing Courses on Technology and
Engineering for All Students.‖ WIP. FIE.
Krupczak, John et al. ―A Framework for
Developing Courses in Engineering and
Technology for Non-Engineers.‖ ACP.
Kurtanich, David et al. ―Engineering
Technology‘s Design across the Disciplines.‖
ACP.
Loendorf, William, and Terence Geyer. ―Bridging
the Historical Technological Gap between the
Past and the Present in Engineering Technology
Curriculum.‖ ACP.
Lyons, Harvey I., and David B. Meredith.
―Building an Associate Degree in Mining
Technology.‖ CIEC.
McHale, Donal et al. ―DETECT: Developing
Sustainable Pathways toward Innovative,
Sustainable Collaboration between Four
Engineering, Design, and Technology
Education Institutions.‖ ACP.
McReynolds, Kevin. ―Pervasive Computing in
Higher Education: A Smart Classroom Model.‖
The Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Miller, Amy. ―‗Thinking Outside the Book‘ or
―Why My Students Want to Be Called Big
Drips.‘‖ ACP.
Manno, Anthony, and Kamal Shahrabi.
―Technology Courses to Attract Non
Technology Students.‖ Zone.
Moaveni, Saeed., and Karen C. Chou. ―An
Innovative Approach to a Cross-Disciplinary
Senior Design Project.‖ International Journal
of Modern Engineering 8, no. 2
(Spring/Summer 2008): 62-66.
Mynbaev, Djafar et al. ―Support of Study on
Engineering Technology from Physics and
Mathematics.‖ ACP.
Nagchaudhuri, Abhijit. ―Integration Image
Analysis Projects in an Introductory
Computational Methods Course Using
MATLAB Software Environment.‖ ACP.
Nagchaudhuri, Abhijit et al. ―Site Specific
Farming, Environmental Concerns, and
Associated Advanced Technologies, Provide a
Platform for Active Learning and Research at a
Land Grant University.‖ ACP.
Nepal, Birmal, and Jihad Albayyari. ―An
Advanced Quality Engineering Course for
Technology.‖ ACP.
Parmentier, Mary Jane C., and Raji Sundararajan.
―A Multidisciplinary Master‘s Program in
Global Technology and Development.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Pomalaza-Raez, Carlos. ―Dissemination of
Capstone Design Projects through
Interdisciplinary Collaboration.‖ IL/IN.
Ramakrishna, Anoop Hanchinamane, and Veda
Prakash Galigekere. ―Hands On Technology
Day.‖ NC.
Rosentrater, Kurt, and Elif Kongar. ―Not Just
Informative, but Necessary: Infusing Green and
Sustainable Topics into Engineering and
Technology Curricula.‖ ACP.
Rosentrater, Kurt, and Jerry Visser. ―The
Biomass Bandwagon: Three Ideas for
Engineering and Technology Programs to Get
Onboard.‖ ACP.
Sarwar, Abu, and John Blake. ―Teaching
Mathematics to Engineering Technology
Students: Moving Math Instruction into the
Department.‖ ACP.
11
Selig, Gad. ―Transforming a Technology
Management Master‘s Degree Curriculum into
a Successful Inter-Disciplinary Program for the
21st Century Needs of Global Organizations.”
Zone.
Sridhara, B., and Joseph Prince. ―Some
Interesting Engineering Problems with Objects
of Simple Geometry and Relatively Complex
Mathematical Formulations.‖ ACP.
Sticklen, Jon, and Mark Urban-Lurain. ―The
Relationship of Instructor Ratings with TA
Ratings in High Enrollment, Lecture/Lab
Courses: A Preliminary Study.‖ ACP.
Verma, Alok. ― Project Based Activity to Attract
Students to Marine Engineering and
Technology Careers.‖ ASME. Paper no. IMECE
2008-67741.
Wanless, Linda et al. ―To Build a Better Bottle
Opener: Interweaving a Project through the
Engineering Technology Curriculum.‖ ACP.
Wosczyna-Birch, K., and M. Barger. ―Flexible
Models for Two-Year as Degree Programs.‖
Proceedings of the Advanced Technological
Education Principal Investigators Conference,
Oct. 29-31, Washington, D.C.
Zhu, Jinwen et al. ―An Innovative Curriculum
Approach for Expanding Engineering
Technology Education.‖ The Technology
Interface 9, no. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Zieren, Gregory, and John Blake. ―Teaching
Aspects of Technological Literary from a
Historical Perspective.” ACP.
Distance Education
Anitsal, Meral et al. ―An Exploratory Assessment
of Distance and On-Ground Delivery of
Business, Math and Engineering Technology
Courses.‖ ACP.
Anwar, Sohail. ―Development of an On-Line
Introduction to Nanotechnology Course: Issues
and Challenges.‖ ACP.
Baptista, Christiane Meiler et al. ―MSys: An
Activities Tracking Tool for E-Learning
Systems.‖ FIE.
Azemi, Asad. ―Enhancement of Traditional and
Distance Learning through Hybrid E-Learning
Approach.‖ ACP.
Dolinina, O. et al. ―Development of Multi-
Platform System of Distant Learning at
Technical University.‖ ICEE.
Edmonson, Charlie. ―A Method of Pacing On-
Line Courses: Blending Asynchronous
Assessments and Recorded Lectures with
Synchronous Lectures.‖ ACP.
Grzejszczyk, E., and B. Galwas. ―Evaluation of
the Candidates‘ Skills for Distance Learning
Study.‖ ICEE.
Hossain, Akram, and Niaz Latif. ―Synchronous
Delivery of Engineering Technology Courses to
a Remote Location–Issues and Challenges
Related to Technology and Students‘
Learning.‖ ACP.
Hsuing, Steve et al. ―Design and Develop a Cost
Effective Microcontroller Training System for
Distance Learning Engineering Students.‖ ACP.
Lewis, Vernon. ―Effective Execution of
Surveying Laboratories in Distance Learning
Using Local Mentors.‖ ACP.
McDaniel, William L., and Aaron K. Ball.
―Distance Learning in Engineering Technology
at Western Carolina University: Celebrating
Success and Looking toward the Future.‖ SEE.
Mehrabian, Ali et al. ―Crafting Online Exams in
Engineering and Technology: Latest
Challenges, Methodologies, and Trends.‖ ACP.
12
Miertschin, Susan, and Cheryl Willis. ―Using
Course Maps to Enhance Navigation of E-
Learning Environments.‖ ACP.
Rajagopal, Chitra. ―Distance Learning Delivery
of a Web-Based Degree in Electrical/
Electronics Engineering Technology, Which
Incorporates Hands-On Laboratory
Experiments and Real Time Video.‖ ACP.
Zia, Omar. ―E-Learning and E-Teaching: One
Step Closer to Global University.‖ Proceedings
of the 5th International Conference on Mobile
and Computer Aided Learning. April 16-19,
2008, Amman, Jordan.
Diversity
Agajanian, Aram et al. ―Multiple Regression
Analysis of the Factors That Affect
Male/Female Enrollment/Retention in
Electronics and Computer Engineering
Technology Programs at a For-Profit
Institution.‖ ACP.
Bilen-Green, Canan et al. ―Mentoring Young
Girls into Engineering and Technology.‖ ACP.
Birmingham, Stacy, and Mara Wasburn. ―On or
Off the Tenure Track: The Work Lives of
Women Engineering and Technology Faculty.‖
ACP.
Bro ov , S. et al. ―The Increasing Integration of
Young Worker´s Rate, Especially Woman, into
Research of Complex Environment Protection.‖
ICEE.
Foster-Blackwell, Elinor. ―Successful Strategies
for Educating Students with Disabilities in
Technology Education.‖ IJME. Paper no. 041.
Harris, Kara. ―Recruitment in
Engineering/Technology Teacher Education:
Factors That Influence Females.‖ ACP.
Kongar, Elif et al. ―Increasing the Participation of
Women in the Engineering and Technical
Services Industry.‖ Zone.
Kowalski, Joan, and Tracie L. Brockhoff. ―The
‗FIRSTE‘ Fifteen Years.‖ ACP.
Leite, Pedro, and Jung Oh. ―An Analysis of
Successful Minority Students Enrolled in
Technology Degree Programs.‖ ACP.
Tolley, Patricia et al. ―Enhancing Diversity in
Engineering Technology: Phase 2 of North
Carolina Junior Engineering Technology
Society (NCJETS).‖ ACP.
Walser, Andy. ―Building Academic Paths in
Engineering and Technology for
Underrepresented Students.‖ ACP.
Zimmerman Lisa, and Gerhard Sprung.
―Technology Is Female: How Girls Can Be
Motivated to Learn Programming and Take up
Technical Studies through Adaptations of the
Curriculum, Changes in Didactics, and
Optimized Interface Design.‖ ICEE.
Electrical/Electronics
Ahmadian, Mohamad H. ―Promoting Critical
Thinking Skills through a Capstone Course.‖
GSW.
Alarje, Nasser et al. ―The Electrical Engineering
Technology Program Outcome Assessment
Process–Development and Implementation.‖
ACP.
Allen, Gale. ―Concept Learning Experiment in
Electronics.‖ IL/IN.
Allen, Gale. ―DSP Communications Experiment.‖
IL/IN.
Azad, Abul. ―Design and Development of an
Introductory Digital Electronic Course within
an Undergraduate Program.‖ Journal of
Engineering Technology 25, no. 1 (Spring
2008): 26-34.
Azemi, Asad. ―Teaching Electric Circuits Using
Tablet PC and Centra.‖ ACP.
13
Bartonek, Frank et al. ―Quantifying Quality: A
Measurement Attempt for Return on Investment
for a Small Electronics Engineering
Technology Program.‖ ACP.
Bernadin, Shonda L., and Youakim Al-Kalaani.
―An Effective Model for Course-Level
Continuous Improvement in an Electrical
Engineering Technology Communications
Course.‖ SEE.
Brey, Barry B. Applying PC18 Microcontrollers:
Architecture, Programming, and Interfacing
Using C and Assembly. Columbus, OH:
Prentice Hall, 2008.
Cartwright, Kenneth V. ―Non-Calculus
Derivation of the Maximum Power Transfer
Theorem.‖ The Technology Interface 9, no. 2
(Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Chacon, Sergio, and Mequaint Moges. ―Project-
Based Learning in Telecommunications:
An Approach To Teaching New Technologies.‖
GSW.
Chen, Xuemin et al. ―Introduction of Freescale
Microcontrollers into the Electronics and
Computer Technology Curriculum.‖ ACP.
Craig, Walter O., III. ―Improving Education in
Engineering Technology by Offering Hands-On
Processing in a Cleanroom Laboratory for
Nano-Sensor Fabrication.‖ GSW.
Dangelo, Daniel et al. ―Technical Knowledge
Transfer for Low-Cost Buck-Boost
Converters.” ACP.
Dutko, Michael et al. ―Computer-Controlled
Instrumentation Projects by Sophomore-Level
EET Students.‖ ACP.
Everly, James, and Brian Resnick. ―A PSK31
Audio Beacon Project Provides a Laboratory
Capstone Design Experience in Digital
Communications.‖ ACP.
Floyd, Thomas L. Electronic Devices,
Conventional Current Flow Version. 8th ed.
Columbus, OH: Prentice Hall, 2008.
Floyd, Thomas L. Electronic Devices, Electronic
Flow Version. 8th ed. Columbus, OH: Prentice
Hall, 2008.
Fong, Roger et al. ―The Shower Zone 350.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Franzl, Richard et al. ―E-Learning Laboratories
for Optical Circuits: Separation of
Imperfections in Technology and Teaching
Methodologies.‖ International Journal of
Modern Engineering 8, no. 2 (Spring/Summer
2008): 11-18.
Goetsch, David L. The Successful Electronics
Technician. Clifton Park, NY: Delmar
Cengage, 2008.
Guccione, Sm, and Uros Marjanovic. ―Automatic
Identification/RFID Course and Equipment for
Teaching and Research.‖ IJME. Paper no. 170.
Gui, Liping. ―PSCAD Simulation in a Power
Electronics Application Course.‖ The
Technology Interface 9, no. 2 (Spring 2008).
Available at
http://technologyinterface.nmsu.edu/Spring08/.
Hackworth, John. ―Development of an EET
Lecture Course in iPod Format.‖ ACP.
Haddad, Ghaith et al. ―Interactive Electrical
Circuit Tutoring Tool–eTutor.‖ SEE.
Hata, David M. Introduction to Vacuum
Technology. Columbus, OH: Prentice Hall,
2008.
Hill, Jonathan, and Akram Abu-aisheh.
―Educational Optical Fiber Data
Communications Toolkit.‖ ACP.
14
Ibrahim, Ghassan et al. ―Performance Analysis of
915 MHZ RFID System Operating in a
Fluorescent Lighting Environment.‖ ACP.
Kalaani, Youakim, a et al. ―Bridging the Gap
between Lab and Lecture Using Computer
Simulation.‖ ACP.
Kalatunga, Athula, and Mike Bastick. ―Power
Electronics for Energy Efficiency–Integrating
Commercial Drive Development Platforms and
Pumps for Real World Learning.‖ The
Technology Interface 9, no. 2 (Spring 2008).
Available at
http://technologyinterface.nmsu.edu/Spring08 /.
Kannan, Arunachala Nadar Mada et al. ―Novel
Technology for Electronics Instruction–An
Electronics Studio.‖ ACP.
Karunaratne, Muddumage, and Gregory Dick.
―Incorporating Basic Design Flow in EET
Curriculum.‖ ACP.
Kavianpour, Alireza et al. ―A Teaching Tool for
Understanding Different Audio Filter.‖ GSW.
Khan, Ahmed et al. ―Chess Honing Electronic
Switching System (C.H.E.S.S. Board): A Case
Study of Successful Design and Implementation
of a Senior Design Project.‖ ACP.
Khan, Saeed, and John DeLeon. ―Articulating
Need Sensitive Vertically Integrated Programs
for Electronic Technology.‖ ACP.
Kleitz, William. Digital Electronics: A Practical
Approach. 8th ed. Columbus, OH: Prentice
Hall, 2008.
Koh, Min-Sung et al. ―A Class Project on an
LDPC-Based Error Correcting System.‖ ACP.
Kronenberger, John, and John M. Sebeson.
Digital Signal Processing: A Computational
Approach. Clifton Park, NY: Delmar Cengage,
2008.
Lazarowitz, Matt, and Aldo Morales.
―Applications of Mathematical Morphology in
Edge Anti-Aliasing Algorithms.‖ International
Journal of Modern Engineering 8, no. 2
(Spring/Summer 2008): 5-10.
Lin, Cheng et al. ―An Integrated Simulation
Design with Three-Dimensional Motions and a
Hydraulic Stewart Simulator.‖ ACP.
Lozano, Albert. ―Writing Critical Reviews in
Technical Courses in a BSEET Program:
Student Perceptions.‖ ACP.
Lozano-Nieto, Albert. ―Incorporating Cost-
Efficient Radio Frequency Experiences in
Engineering Technology Programs.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
McNally, Helen. ―Technologies of
Nanotechnology.‖ ACP.
Mainoo, Joseph, and Sri Kolla. ―A Study to
Establish a Master‘s Degree Program in
Electronics and Computer Technology at
Bowling Green State University.‖ ACP.
Mazidi, Mohammed Ali et al. PC Microcontroller
and Embedded Systems: Using Assembly and C
for PIC18. Columbus, OH: Prentice Hall,
2008.
Menhart, Steve. ―Teaching a Modern Digital
Systems Design Course: How to Select the
Appropriate Programmable Devices and
Software?‖ GSW.
Miller, Ray et al. ―Power Engineering
Technology Program Development.‖ ACP.
Mohtar, Aaron et al. ―A Remote Laboratory for
Microelectronics Fabrication.‖ FIE.
Moussavi, Massoud. ―Bridging Health and Food
Science to Electronic Engineering.‖ ACP.
Moy, Kin. ―Integration of Electromagnetics (EM)
and Electromagnetic Compatibility (EMC) with
Electrical Engineering Technology Program.‖
ACP.
15
Musa, Sarhan M. et al. ―Blocking and Clipping
Estimations for TDM in Satellite
Communication Technology.‖ The Technology
Interface 9, no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/.
Ossman, Kathleen. ―MATLAB/Simulink Lab
Exercises Designed for Teaching Digital Signal
Processing Applications. ACP.
Porter, Jay et al. ―Embedding Business Students
into EET/TET E4 E-Teams.‖ ACP.
Rahrooh, Alireza et al. ―Hot Spot Minimization
of NOC Using Ant-Net Dynamic Routing
Algorithm.‖ ACP.
Raeisi, Reza, and Yi-Te Le. ―Applying
Embedded Systems Design for Distance
Learning.‖ PSW.
Ravasi, Behrad. Fundamentals of
Microelectronics. Indianapolis: Wiley & Sons,
2008.
Rawat, Kuldeep S. et al. ―Integrating Mobile
Tablet-PC Technology and Classroom
Management in Undergraduate Electronic
Engineering Technology Courses.‖ FIE.
Reid, Kenneth J., and Ronald Dueck. Introduction
to Digital Electronics. Clifton Park, NY:
Delmar Cengage, 2008.
Rubendall, Gary et al. ―Project-Based Learning of
Telecommunication Networking.‖ GSW.
Saneifard, Rasoul et al. ―Integrated Vehicle
Safety Alarm with Wireless Telephone
Network.‖ ACP.
Shireen, Wajiha, and Sara McNeil. ―A Modern
DSP-Based Laboratory for Power Electronics
Education.‖ ACP.
Skvarenina, Timothy. ―Using Inexpensive Motor
Drives in an Introductory Power and Controls
Course.‖ ACP.
Spezia, Carl. ―Instructional Development and
Assessment of a Task-Oriented Senior Level
Data Acquisition Project in a Simulated
Business Environment.‖ ACP.
Tan, Li, and Jean Jiang. ―A Simple DSP
Laboratory Project for Teaching Real-Time
Signal Sampling Rate Conversions.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Thomas, Graham, and Esther Thomas. ―Teaching
Electronics Engineering Technology Design
Using Cases: A Student Perspective.‖ ACP.
Villanucci, Robert S. ―Designing a Robot-Based
Electromechanical Force-Sensor System for
Direct Interface to the ADC of a Low-Cost
Microcontroller.‖ Journal of Engineering
Technology 25, no. 2 (Fall 2008): 32-40.
Villeneuve, Paul. ―Arc Flash Analysis at the
University of Maine.‖ ACP.
Zhou, Zhaoxian. ―Engineering Technology
Explained in Math and Science–A New
Course.‖ SEE.
Zhou, Zhaoxian. ―Seminar-Based
Electromagnetics Education.‖ SEE.
Zoghi, Ben, and Bob McKee. ―RFID-Based
Network for Personnel and Mission-Critical
Asset Tracking in a Disaster City.‖ FIE.
Faculty Development
Beasley, Ryan, et al. ―New Faculty Meetings:
Surviving the First Year of the Tenure Track
Together.‖ ACP.
Craft, Elaine et al. ―Addressing Faculty
Development as a Vital Step in
Transformational Change to Improve
Engineering Technology and Technician
Education.‖ ACP.
Fidan, Ismail et al. ―Broadening Rapid
Prototyping Awareness via P16 STEM Teacher
Workshops.‖ ACP.
16
Gallardo, Victor et al. ―Development and
Assessment of Online Modules for Hybrid
Orientation Program.‖ GSW.
Harding, Gene et al. ―An Oft-Overlooked
Resource: Undergraduate Students Can Be a
Valuable Asset to Help Improve Curriculum,
Facilities, and Pedagogy.‖ ACP.
Khan, Ahmed et al. ―Students‘ Perceptions of the
Importance of Faculty Technical Currency,
Teaching Techniques, and Their Commitment
to Student Success for Their Learning Success.‖
ACP.
Zhang, James et al. ―Scholarship Reconsidered
and Its Impact on Engineering and Technology
Graduate Education.‖ ACP.
Industrial
Bayraktar, Tuba, and Srikanth B. Pidugu.
―Industrial Energy Assessment Projects in a
Thermal-Fluid System Design Course.‖ NMW.
Creese, Robert, and Deepak Gupta. ―Multi-
Disciplinary Team Project with Software.‖
ACP.
Ernest, Andrew et al. ―An Integrated Systemic
Approach to Developing a Professional Water
and Wastewater Workforce: ETD IT/IET
Interest Group.‖ ACP.
Eslami, Akbar et al. ―A PLC Project in a Control
Course Laboratory.‖ ACP.
Kelley, David et al. ―The Utilization of a Product
Lifecycle Management System within a Team
Design Project.‖ ACP.
Lightner, Stanley L., and Richard A. Meznarich.
―Assessing Industrial Technology Programs: A
Comprehensive Approach Yielding Beneficial
Results. International Journal of Modern
Engineering 8, no. 2 (Spring/Summer 2008):
19-26.
Massiha, G. H. ―Home Energy Conservation
Audits, A Service Learning Experience for
Industrial Technology Students.‖ GSW.
Montgomery, Douglas C. Introduction to
Statistical Quality Control. 6th ed. Indianapolis:
Wiley & Sons, 2008.
Scachitti, Susan et al. ―Adding Lean and Six
Sigma to Industrial Engineering Technology
Programs: Does This Constitute a Change in
Curriculum?‖ ACP.
Stienbecker, Adam. ―Applied Industrial Robotics:
A Paradigm Shift.‖ ACP.
Summers, Donna. ―Increasing Awareness about
Service Industries Opportunities for IET and IE
Graduates.‖ ACP.
Industry/Government/Employers
Alberts, Jerry. ―The Importance of Engaging
Business and Industry.‖ CIEC.
Ball, Aaron K. et al. ―Development and Field
Testing of a Hybrid Water Heating and
Dehumidification Appliance.‖ IJME. Paper no.
001.
Barr, Ronald E., and Patricia Fox. ―The New
ASEE Student Division: Opportunities for
Industrial and Corporate Participation.‖ CIEC.
Buchanan, Walter W. ―Building Engineering
Technology Curriculum with Industry Partners–
Tricks of the Trade and Secrets Revealed.‖
CIEC.
Buchanan, Walter W. ―Partnerships in
Engineering Education.‖ CIEC.
Cowell, Joy et al. ―Improving Curriculum with
Third Party Standards and Industrial Advisory
Boards.‖ ACP.
17
Dombrowski, Thomas. ―Building Industry
Relationships.‖ ACP.
Fuehne, Joseph. ―Industry-University
Collaboration to Improve Test Data Quality.‖
ACP.
Gomez-Rivas, Alberto et al. ―Fire Protection and
Safety Management: Two Partnership
Programs.‖ ACP.
Gore, David W., and John Leonard. ―Industry and
University Collaboration.‖ The Technology
Interface 9, no. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Hadlock, Heather et al. ―From Practice to
Entrepreneurship: Rethinking the Learning
Factory Approach.‖ IJME. Paper no. 081.
Hartman, Nathan et al. ―Purdue University-
Boeing Product Lifecycle Management
Certificate Program.‖ CIEC.
Hembroff, Guy C., and Masser Alaraje.
―Integrating Industry with Senior Project
Research: Open-Source VoIP Design Project
for Medical Sector.‖ The Technology Interface
9, no. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Hundley, Stephen et al. ―Employability for
Engineering and Technology Graduates.‖ ACP.
Jin, Xiaomin et al. ―International Engineering
Research and Educational Collaboration on
Gallium-Nitride (GaN) Lasers and Light
Emitting Diodes (LEDs).‖ IJME. Paper no. 057.
Koch, Daphene Cyr. ―Using Industry Training as
Course Curriculum in Construction.‖ CIEC.
Koch, Daphene. ―Utilizing Industry Training as
Research, Enrichment and Reward in
Technology Programs.‖ ACP.
Kovács, G. L. ―Some Technology Transfer
Achievements of Hungarian SMEs and
Academic Institutions–EU Perspectives.‖ ICEE.
Lozano, Albert. ―Joining the Workforce: Student
Perceptions of Their Readiness in Non-
Technical Skills.‖ ACP.
Mohammed, Jaby et al. ―Departmental Survival
through Collaborative Industrial Partnership.‖
ACP.
Munukutla, Lakshmi, and Carol Popovich.
―Universities Collaborate with Industry to Fill
Need for Hands-On Workshops.‖ ACP.
Pecen, Recayi ―Reg‖ et al. ―Utilizing Advanced
Software Tools in Engineering Technology
Curriculum as a Bridge between Academia and
Industry.‖ ACP.
Peterson, William R. ―Academe and
Industry—Where Is the Disconnect?‖ PSW.
Stone, Wesley, and Larry Smith. ―Engaging
Engineering Technology Students Using a
Coordinate Measuring Machine.‖ ACP.
Sugg, Douglas, and John Fishell. ―Navy
Outreach: Science and Technology Education
Partnership.‖ ACP.
Tapper, Jerome et al. ―Suggested Methodologies
and Tips for Developing Successful Industry
Partnered Collaborations–Discoveries for New
Faculty.‖ CIEC.
Information Technology
Al-Rawi, Akram, and Azzedine Lansuri.
―Integrating the Security-Exam Objectives into
Information Technology Curricula.‖ ACP.
Lansuri, Azzedine et al. ―A Course Sequence for
Integrating Problem Solving and Critical
Thinking in a Hybrid Outcome-Based IS/IT
Curriculum.‖ ACP.
Lénárt, A., and Á. Gocsál. ―Internet-Related
Activities of Students of Information
Technology.” ICEE.
18
Willis, Cheryl L. ―Using the Labor Market
Information System to Inform Continuous
Program Improvement Efforts.‖ GSW.
Instructional Technology
Agrawal, J. ―Enhanced Learning by Using
Lecture on Demand Technology.‖
INTERTECH.
Avanzato, Robert. ―Second Life 3D Virtual
World in a Freshman Information Sciences and
Technology Course.‖ ACP.
Baer, William. ―Using Videos to Teach the
Ethical Use of Engineering Information.‖ ACP.
Berque, David. ―Using DyKnow Vision and
Tablet PCs in the Technical Classroom–Part
I.‖ IL/IN.
Cromack, Jamie. ―Technology and Learning-
Centered Education: Research-Based Support
for How the Tablet-PC Embodies the Seven
Principles of Good Practice in Undergraduate
Education.‖ FIE.
Fernandez, Eugenia et al. ―Assessment of the
Pedagogical Value of an Innovative E-Learning
Environment That Uses Virtual Reality.‖ IL/IN.
Guccione, Sam, and Tom McDonald.
―Introduction to Discrete Event Modeling and
Simulation: Arena and ProModel.‖ IL/IN.
Hyder, Andrew C. et al. ―Using Global
Positioning Systems (GPS) to Involve Students
in Science and Technology.‖ NC.
Markey, Mia, and Kathy Schmidt. ―Relationship
between Learning Style Preferences and
Instructional Technology Usage.‖ ACP.
Mehrabian, Ali et al. ―Course Transformation
from Live/Synchronous to
Remote/Asynchronous Using Technology.‖
INTERTECH.
Obadat, Mohammad, and Steve Holt.
―Instructional Technology Tools: Exploring
What‘s New.‖ SEE.
Pasek, Zbigniew. ―It‘s All There: Teaching
Complex Management Content Using Feature
Films.‖ ACP.
Pasek, Zbigniew. ―We Got Games: Informal
Technology Education in a Hands-On
Museum.‖ ACP.
Rajaravivarma, Veeramuthu. ―Classroom
Experience of Peer-to-Peer Network
Technology as Next Generation Television.‖
ACP.
Roux, David-Michael, and Adam Czekanski.
―The Use of Clicker Technology to Evaluate
Short- and Long-Term Concept Retention.‖
Zone.
Stanton, Ken. ―Enhancement of Problem Solving
Techniques with Tablet PC-Based Learning
Technologies. WIP. FIE.
Stickel, Micah, and Sean V. Hum. ―Lessons
Learned from the First-Time Use of Tablet PCs
in the Classroom.‖ FIE.
Sticklen, Jon et al. ―Effective Engagement of
Millennial Students Using Web-Based Voice-
Over Slides and Screen Demos to Augment
Traditional Class Delivery.‖ WIP. FIE.
Stone, Wes et al. ―Integrating LabVIEW into
Engineering Technology Curricula.‖ SEE.
Vidalis, Sofia, and Joseph Cecere. ―Incorporating
Tablet Portable Computers into the Classroom.‖
ACP.
International
Adegbuyi, P. A. O., and J. O. Uhomoibhi.
―Trends in the Development of Technology and
Engineering Education in Emerging
Economies.‖ ICEE.
19
Antonio, J., and S. Moaveni. ―International
Partnerships in Engineering Education:
American and African Perspectives.‖ IJME.
Paper no. 126.
Blust, Rebecca P., and Scott J. Schneider.
―Integrating Chinese Students into an American
Capstone Engineering Technology Design
Course.‖ IJME. Paper no. 171.
Choudhury, I. ―The Effect of Political Unrest on
Construction Time for Food Grain Warehouse
in Bangladesh.‖ ACP.
Craig, Walter O. ―Preparing the Engineering
Technology Graduate for the Global
Marketplace.‖ IJME. Paper no. 198.
Creese, Robert, and M. Adithan. ―Engineering
Excellence: Start-Up to Number One.‖ ACP.
Dolle, Marissa et al. ―Barombi Village Water
Project.‖ NC.
Ismail, K. M., and M. Puteh. ―Engineering
Technology: A Malaysian Case.‖ ICEE.
Khan, Saeed, and Beverlee Kissick. ―Beating the
Competition down with the Stick of Education:
A Winning Strategy for a Global World.‖ ACP.
Koch, Daphene C. et al. ―Comparing Swiss and
U.S. Homes in the Area of Energy Efficiency.‖
IJME. Paper no. 084.
Kornecki, Andrew et al. ―A Common US-Europe
Curriculum: An Approach for Real-Time
Software Intensive Systems.‖ ACP.
Mazumder, Quamrul H. ―A Comparative
Analysis and Evaluation of Different
Approaches of Globalization of Engineering
Curriculum in the USA.‖ IJME. Paper no. 115.
Mehalik, Michael. ―Evaluating and International
Course in Product Realization for Global
Opportunities.‖ ACP.
Mehrabian, Ali et al. ―Contributions of
International Students to Engineering Graduate
Schools in the United States.‖ ACP.
Minaie, Afsaneh, and Reza Sanati-Mehrizy. ―A
Comparison of Embedded Systems Education
in the United States, European, and Far Eastern
Countries.‖ ACP.
Ofosu, Willie. ―Enriching a Curriculum with
Local Content.‖ ACP.
Ofosu, Willie K., and Francois Sekyere.
―Relevance of Student Input in Globalization of
Engineering Education.‖ IJME. Paper no. 203.
Ofosu, Willie K., and Francois Sekyere. ―Using
Service Learning in an Engineering Program in
Ghana.‖ International Journal for Service
Learning in Engineering 3, no. 2 (Fall 2008):
42-9.
Rose, Andrew, and Katherine Stahl Kinsinger.
―Incorporating Diversity and International
Awareness into an Introduction to Engineering
Technology Seminar Course.‖ ACP.
Sheta, Sherief A., and Robert A. Chin.
―Emphasizing Sustainability Principles in
Developing Building Technology Courses:
Engineering Educational and Research
Collaboration between Egypt and USA.‖ SEE.
Sundararajan, Rajeswari et al. ―Electrical
Engineering Education in India: Another
Look.‖ ACP.
Zeng, Fanyu. ―A Collaborative Curriculum
Enhancement with Recognition of
Characteristics of Chinese College Students.‖
ACP.
Laboratories
Ashby, Joe E. ―The Effectiveness of
Collaborative Technologies in Remote Lab
Delivery Systems.‖ FIE.
Ball, Aaron K. et al. ―A Low Cost Environmental
Test Chamber for Teaching Engineering and
Technology Students.‖ SEE.
20
Libii, Josue. ―Using the Fourier Theorem to Test
the Solution of a Differential Equation in the
Lab.‖ ACP.
Marshall, John. ―The Ultimate Capstone Course:
A Laboratory-Based Problem Solving Design
Project.‖ ACP.
Singh, Gurinder. ―Enhancing Laboratory
Experience to Students by Introducing USB
Connectivity into Lab Environment Using
FTDI.‖ ACP.
Walk, Steven. ―Long on Students and Short on
Equipment: An Effective and Well Received
Method to Improve Laboratory Outcomes.‖
ACP.
Liberal Studies
Balachandran, Swaminathan et al. ―Guidelines for
Integrating Contemporary Issues into
Engineering & Engineering Technology
Curricula.‖ NMW.
Bhattacharya, Pradeep K., and Jiecai Luo.
―Ethical Challenges Affecting Engineers and
Engineering Education.‖ GSW.
Birmingham, William. ―Towards an
Understanding of Artificial Intelligence and Its
Application to Ethics.‖ ACP.
Blythe, Stephen et al. ― A Truly Interdisciplinary
Course Grounded in Computer Science.‖
IL/IN.
Catalano, George et al. ―Engineering, Peace,
Justice, and the Earth: Developing Course
Modules.‖ ACP.
Colby, Anne, and William M. Sullivan. ―Ethics
Teaching in Undergraduate Engineering
Education.‖ Journal of Engineering Education
97, no. 3 (July 2008): 327-38.
Cooney, Elaine et al. ―Critical Thinking in
Engineering and Technology Education: A
Review.‖ ACP.
Cottrell, David. ―Integrating Engineering Ethics
Education into a Multi-Disciplinary Seminar
Course: Making the ‗Soft‘ Outcomes
Relevant.‖ ACP.
Cruz, Jose et al. ―Developing Engineering Ethics
across the Curriculum Best Practices: The EAC
Toolkit.‖ ACP.
Cunningham, Patrick. ―Engaging Students in the
Social Context of the Engineering Profession
through a Mock Congressional Hearing
Exercise.‖ ASME. Paper no. IMECE 2008-
67302.
Ermer, Gayle. ―Understanding Technological
Failure Ethics, Evil, and Finitude in
Engineering Disasters.‖ ACP.
Frey, William, and Efrain O‘Neill-Carrillo.
―Teaching Engineering Ethics to Professional
Engineers in Puerto Rico.‖ WIP. FIE.
Fuehne, Joseph P. ―An Integrated Ethics
Component with Direct Assessment.‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at
http://technologyinterface.nmsu.edu/Fall08/.
Hjorth, Linda S. et al. Technology and Society:
Issues for the 21st Century and Beyond.
Columbus, OH: Prentice Hall, 2008.
Huyck, Margaret et al. ―Enhancing Ethical
Awareness within Undergraduate
Multidisciplinary Teams by Preparing Codes of
Ethics.‖ WIP. FIE.
Jordan, William. ―Ethical Issues Related to
Engineering Service Learning.‖ GSW.
Lenkei, P. ―Ethics for Engineering Students.‖
ICEE.
Mallikarjunan, Kumar et al. ―Improving Ethics
Studies through a Spiral Curriculum: Piloting
an Ethics Discussion at the Senior Level.‖ ACP.
Masters, Kristyn, and Sarah Pfatteicher.
―Lowering the Barriers to Achieve Ethics
across the Engineering Curriculum.‖ ACP.
21
Newberry, Byron et al. ―Design of Web-Based
Professional Ethics Modules to Alleviate
Acculturation Barriers for International
Graduate Students in Engineering.‖ ACP.
Nieusma, Dean. ―Integrating Technical, Social,
and Aesthetic Analysis in the Product Design
Studio: A Case Study and Model for a New
Liberal Education for Engineers.‖ ACP.
O‘Neill-Carrillo, Efrain et al. ―Development and
Assessment of an Introductory Research Ethics
Module.‖ WIP. FIE.
O‘Neill-Carrillo, Efrain et al. ―‖Social, Ethical,
and Global Issues in Engineering.‖ FIE.
Plemmons, Keith. ―Critical Thinking in Higher
Education: Strategy for Development.‖ SEE.
Riley, Donna. ―Ethics in Context, Ethics in
Action: Getting beyond the Individual
Professional in Engineering Ethics Education.‖
ACP.
Scrignoli, G. M., and G. S. Olguin. ―The
Contribution of Human Sciences to Engineering
Courses: Technical Knowledge Linked to the
Values and Principles.‖ ICEE.
Tucker, Jessica et al. ―Special Session–New
Engineering Stories: How Feminist Thinking
Can Impact Engineering Ethics and Practice.‖
FIE.
Valdes, Didier et al. ―Introducing Graduate
Students to Ethical Deliberation and Case
Analysis in Research Ethics.‖ WIP. FIE.
Zandvoort, H. What Scientists and Engineers
Should Know about the History of Legal
Liability and Why They Should Know It.‖
ICEE.
Manufacturing
Chattopadhyay, Somnath. ―Study of Accuracy of
CNC Machine Tools.‖ ACP.
Edinbarough, Immanuel, and Yazmin Muniz.
―Experiences with the Design and Development
of a Novel Rapid Product Manufacturing
Technique in the Batch Production of Miniature
Industrial Components.‖ ACP.
Edinbarough, Immanuel, and Posinasetti Rao.
―Future of Microsystems Technology
Education: Research and Outreach as Applied
to 21st Century Manufacturing.‖ ACP.
Elasmi, Akbar. ―Robot Palletizing Work Cell
Simulation.‖ ACP.
Falkowski, Sean. ―Analysis of the Curriculum of
Manufacturing Engineering Technology
Programs.‖ ACP.
Fidan, Ismail. ―Onground versus Distance Rapid
Prototyping Practices.‖ WIP. FIE.
Fidan, Ismail et al. ―Innovative Delivery of MUT
4450–Rapid Prototyping Course.‖ ACP.
Gadalla, Mohamed. ―Innovation in Curriculum
Development for Manufacturing Education.‖
ASME. Paper no. IMECE 2008-66372.
Godbey, Jess et al. ―Meeting the Needs of
Students and Employers: Development of an
Innovative Graduate Program in Manufacturing
Systems Technology.‖ ACP.
Gray, George D. ―The Integration of Hands-On
Manufacturing Processes and Applications
within Engineering Disciplines.‖ GSW.
Harringer, Bradley et al. ―Using Guitar
Manufacturing to Recruit Students into STEM
Disciplines.‖ ACP.
Johnson, Richard. ―Simulating Manufacturing
Processes in Education and Training: Enhanced
Color Sorting Example.‖ The Technology
Interface 9, no. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Jones, Martin P. et al. ―Enhancing Student
Understanding of Control Charts Using a Dice
Activity.‖ The Technology Interface 9, no. 2
(Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
22
Kanu, Rex. ―Introducing Polymer/Clay
Nanocomposites to a Manufacturing
Engineering Technology Program‖ ACP.
Klein, Peter W. ―Mold Making For Rotationally
Molded Plastics Products.‖ The Technology
Interface 9, no. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Mott, Robert L. Applied Strength of Materials.
5th ed. Upper Saddle River, NJ:
Pearson/Prentice Hall, 2008.
Narang, Ramesh. ―Teaching Applied Measuring
Methods Using GD & T.‖ ACP.
Otieno, Andrew et al. ―A Student Project to
Quantify Machinability of Plastics Using Corn
Ethanol Co-Products as Biofiller–An
Educational Perspective for Green
Manufacturing Applications.‖ IL/IN.
Pomeranz, Gilah et al. ―Consolidating Two NSF
Online Materials and Information Resource
Centers for Manufacturing and Engineering
Technology Education.‖ ACP.
Roe, Eric et al. ―A Process Map for State-Wide
Engineering Technology/Manufacturing
Technology Curriculum Reform.‖ ACP.
Rosentrater, Kurt A. et al. ―Determining
Machining Parameters of Corn Byproduct
Filled Plastics.‖ International Journal of
Modern Engineering 8, no. 1 (Fall 2008): 13-
18.
Shah, Hiral A., and Tracy S. Tillman. ―An
International Lean Certification Role
Delineation Delphi Study Applied to Develop
Graduate-Level Curriculum in Lean
Manufacturing.‖ The Technology Interface 9,
no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Smith, Rathel R.(Dick) et al. ―Manufacturing
Engineer-Manufacturing Technologist, Is There
a Difference.‖ The Technology Interface 9, no.
1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Ssemakula, Mukasa. ―Outcomes Assessment in a
Hands-On Manufacturing Processes Course.‖
ACP.
Teo, Adrian et al. ―High Performance Machining:
A Practical Approach to High-Speed
Machining.‖ ACP.
Ulmer, Jeffrey M. ―System Integration: A Plan of
Implementation.‖ The Technology Interface 9,
no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Ulmer, Jeffrey M., and Troy E. Ollison.
―Alternative Energy Choices, Conservation,
and Management: A Primer for Advanced
Manufacturing Managers.‖ IJME. Paper no.
085.
Waldrop, P. S. ―Manufacturing Enterprise
Simulation as the Foundation Course and
Synergistic Focus of Advanced Course Hands-
On Application.‖ ACP.
Wosczyna-Birch, K. et al. ―Impact of National
Science Foundation Next Generation
Manufacturing: Where Are We Now?‖
Proceedings of the ASME International
Conference on Manufacturing Science and
Engineering, October 7-10, 2008, Evanston, IL.
Paper no. MSEC_ICMP2008-72560.
Zhan, Wei, and Jay Porter. ―Teaching Six Sigma
in a Course Project.‖ ACP.
Mechanical
Alba-Flores, Rocio, and David Hunt.
―Incorporating LabVIEW to Enhance the
Learning Experience in the Electromechanical
Analysis Laboratory.‖ ACP.
Alvarado, Jorge et al. ―Design, Build and Test:
An Approach for a Capstone Design Course in
Engineering Technology.‖ ACP.
Avanzato, Robert. ―Suburban Outdoor Challenge
for Autonomous Mobile Robots.‖ ACP.
23
Arif, Razwaan et al. ―An Optimized Humidity
and Temperature Control System for Fuel
Cells.‖ ACP.
Arruda, David et al. ―Small-Scale Green-Powered
Hydrogen Generation System.‖ ASME. Paper
no. IMECE 2008-68760.
Atiqullah, Mir. ―Undergraduate Materials
Research: Tensile Impact Toughness of
Polymers.‖ ACP.
Chiou, Richard, and Yongjin Kwon. ―Inter-
Controllable Vortex Tube Experiments for
Thermodynamics Laboratory Class.‖
Computers in Education 18, no. 4 (October-
December 2008): 2-8.
Chiou, Richard et al. ―Java Programming for
Online Quality Control Laboratory Integrated
with Remote Robot.‖ Computers in Education
18, no. 3 (July-September 20080: 42-54.
Chiou, Richard et al. ―An Internet-Based Quality
Control Laboratory via Integration of the
Remote Robotic Operation and Ultrasound
Nondestructive Evaluation.‖ ASME. Paper no.
IMECE2008-67101.
Choudhury, Alamgir et al. ―Multi-Mode Fluid
Learning and Fluid Mechanics to Fluid Power:
An Undergraduate Curriculum Reform.‖ ACP.
Cochran, Robert S., et al. ―Using Rapid
Prototyping Tools for Automatic Control
System Laboratory.‖ International Journal of
Modern Engineering 8, no. 2 (Spring/Summer
2008): 33-40.
Cook, Kevin, and Robb Larson.‖ ―Mechanical
Engineering Technology Senior Year Course
Integration Model.‖ ACP.
Cuprak, Richard et al. ―Experimental Study of
Waste Egress from Collection Vehicle.‖ ACP.
Danielson, Scott. ―A Statics Skills Inventory.‖
ACP.
Dartnell, W. John et al. ―Demystifying
Thermodynamics by Connecting it with
Mechanics.‖ ASME. Paper no. IMECE2008-
67157.
Das, Digendra. ―New York Nano-Bio-Molecular
Information Technology (NYNBIT) Incubator.‖
ACP.
Das, Nirmal. ―Interactive Tutorial Modules for
Basic Mechanics Topics.‖ ACP.
Drigel, Gary S. ―The Integration of Cost into
Mechanical Engineering Design Curricula.‖
IJME. Paper no. 062.
Drigel, Gary S. ―Use of Decision Science in
Mechanical Engineering Design.‖ Journal of
Applied Science and Engineering Technology 2
(Fall 2008). Available at
http://library.rit.edu/oajournals/index.php/jaset/
article/viewFile/181/136.
Dues, Joseph F. et al. ―New Integrated Materials
and Manufacturing Course Sequence for
Mechanical Engineering Technology.‖ The
Technology Interface 9, no. 2 (Spring 2008).
Available at
http://technologyinterface.nmsu.edu/Spring08 /.
Dupen, Barry. ―Using Internet Sources to Solve
Materials Homework Assignments.‖ ACP.
Edwards, Robert. ―A Homemade 2-Dimensional
Thermal Conduction Apparatus Designed as a
Student Project.‖ ACP.
French, Richard Mark. Engineering the Guitar:
Theory and Practice. New York: Springer,
2008.
Fuehne, Joseph et al. ―First-Year Real World
Competition to Motivate Students.‖ ACP.
Gailani, Gaffar et al. ―Integration of 3D
Modeling, FEA and Rapid Prototyping in
Engineering Technology 2-Year Programs.‖
ASME. Paper no. IMECE 2008-67554.
Georgeou, Trian, and Scott Danielson. ―CNC
Machining: A Value-Added Component of
Engineering Technology Education.‖ ACP.
24
Genis, Vladimir. ―Physical Principles of
Ultrasound Nondestructive Evaluation.”
Journal of Materials Evaluation 66, no. 6
(2008): 548-53.
Genis, V., and M. Zagorski. ―Educational
Ultrasound Nondestructive Testing
Laboratory.‖ Journal of Acoustical Society of
America 124, no. 3 (2008): 1411-18.
Genis, V. et al. ―Nondestructive Testing Course
for Engineering Technology Students.‖ Journal
of Materials Evaluation 66, no. 4 (2008): 374-
9.
Genis, V. et al. ―Real-Time Remote Ultrasound
Nondestructive Evaluation Laboratory.‖
Proceedings of the ASNT Annual Conference,
November 10-14, 2008, Charleston, SC.
Illarionov, V. V. et al. ―Integrated Laboratory
Instruction in Robotics.‖ ICEE.
Irwin, John L. ―Three-Way Comparison Used to
Reinforce FEA Solutions.‖ NMW.
Jovanovic, Vukica et al. ―Collaborative Product
Design and Realization in Mechanical
Engineering Technology Curricula.‖ ACP.
Karimi, Amir. ―Challenges in Teaching Applied
Thermodynamics.‖ ASME. Paper no. IMECE
2008-68121.
Kitto, Kathleen. ―Teaching Basic Materials
Engineering Design to Engineering Technology
Students Using Stringed Instrument Top
Design.‖ ACP.
Kukulka, David J., and James Mayrose.
―Evaluation of the Professional Science
Master‘s (PSM) Degree for Mechanical
Engineering Technology Programs.‖ GSW.
Kukulka, David J., and James Mayrose. ―Issues
and Concerns Recruiting Women and
Minorities into Mechanical Engineering
Technology Programs.‖ GSW.
Kumar, Pramod et al. ―Measuring and Modeling
of a 3-D Road Surface.‖ ACP.
Landis, David et al. ―Steps along a Robotics
Technology Career Pathway.‖ ACP.
Larson, Robb. ―A Snapshot of Success–How
Student-Initiated Automotive Design Became
Integrated into the ME and MET Curricula.‖
ACP.
Liang, Wilson. ―Further Integration of 3D
Modeling into Tool and Fixture Design.‖ IL/IN.
Liu, Yanfei, and Jiaxin Zhao. ―A Kicking
Mechanism for an Autonomous Mobile
Robot.‖ IL/IN.
Marshall, John. ―Material Science Meets
Engineering Education While Building an
Induction Pulse Electric Motor.‖ ACP.
Martin, Delton, and Dale Litwiler. ―An
Investigation of Acceleration and Jerk Profiles
of Public Transportation Vehicles.‖ ACP.
Mayrose, James, and David J. Kukulka.
―Cooperative Learning: An Integral Part of
Mechanical Engineering Technology
Curriculum.‖ GSW.
Milanovic, Ivana, and Tom Eppes. ―Modular,
Adaptable and Reusable Approach to Thermal-
Fluids: Outwitting the Norms (Marathon).‖
ACP.
Myszka, David. ―Alternative Student
Performance Evaluations in Mechanical
Measurement Courses.‖ ACP.
Nagchaudhuri, Abhijit, and Emin Yilmaz.
―Design Experience Using Software Tools in
Undergraduate Engineering Mechanics
Courses.‖ ASME. Paper no. IMECE 2008-
69242.
Newcomer, Jeffrey, and Paul S. Steif. ―What
Students ‗Know‘ about Statics: Specific
Difficulties among Students Entering Statics.‖
FIE.
Pecen, Recayi ―Reg‖ et al. ―Design and
Implementation of a Hydrogen Fuel Cell Data
25
Acquisition and Monitoring Scheme for
Educational Institutions.‖ ACP.
Philpot, Timothy A. Mechanics of Materials: An
Integrated Learning System. Indianapolis:
Wiley & Sons, 2008.
Pippin, Joshua, and Julie Wang. ―Research and
Design on Wind Turbines.‖ ACP.
Redkar, Sangram et al. ―Automotive Engineering
Technology: A Counter-Intuitive Path to
Greater Engineering Technology Enrollment.‖
ACP.
Rodriguez, Jorge et al. ―Lab Activities to Validate
CAE-Based Results for Hose Deformations.‖
ACP.
Shih, HuiRu et al. ―Smart Materials and
Structures Experiments for Undergraduate
Students.‖ ACP.
Sirinterlikci, Arif. ―A Non-Traditional and Multi-
Disciplinary Approach to Teaching
Mechanisms and More.‖ ACP.
Sleiti, Ahmad. ―Bachelor of Science–Engineering
Technology Hydrogen And Fuel Cell Education
Program Concentration.‖ ASME. Paper no.
IMECE 2008-69090.
Smith, Rathel R. (Dick) et al. ―Evaluating Student
Capability to Inspect Welding Quality Using a
GRRS Technique.‖ The Technology Interface 9,
no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Tomasi, Christopher. ―Simulating an Industrial
Experience through Role-Play for Students
Enrolled in a Rural Mechanical Engineering
Technology Program.‖ ACP.
Walker, Keith M. Applied Mechanics for
Engineering Technology. 8th ed. Upper Saddle
River, NJ: Prentice Hall, 2008.
Winstead, Vincent. ―Teaching Optimal Energy
Expenditure Using Robotic Platforms and
Microcontrollers.‖ ACP.
Yilmaz, Emin, and Edward Pinder. ―Design,
Construction and Use of an ASTM Guarded-
Hot-Plate Apparatus as an Independent
Research Project.‖ ASME. Paper no. IMECE
2008-68293.
Zecher, John. ―Development of an Instructional
Tutorial for Teaching Finite Element Analysis
Using ANASYS Workbench.‖ ACP.
Zhang, Haiyan H. ―A Model-Based
Multidisciplinary Correspondent Methodology
for Design-by-Analogy.‖ NMW.
Nuclear
Jonassen, David et al. ―Technical College
Program in Radiation Protection.‖ ACP.
Plummer, Mitty et al. ―Preparing for Expanding
the Nuclear Work Force in Texas.‖ ACP.
Porter, Jay et al. ―Power Engineering
Technology: A New Program Targeted at the
Nuclear Power Industry.‖ ACP.
Teaching Methodology
Akins, Leah M., and Daniel C. Barbuto.
―Developing Team Skills Using a Program-
Embedded Team Assessment Process.‖ FIE.
Ashby, Joe. ―Facilitating Team Activities in a
Project Management Course.‖ IL/IN.
Barger, Marilyn et al. ―The Toothpick Factory:
A Simulation Game for the Soft Skills.‖ ACP.
Broberg, Hal et al. ―Learning Styles of
Engineering Technology and Engineering
Students: Pedagogical Implications.‖ Journal of
Engineering Technology 25, no. 1 (Spring
2008): 10-17
Crown, Stephen et al. ―Learner-Centered Games:
A Pathway to Student Motivation and
Engagement.‖ ACP.
26
Davis, Daniel. ―Understanding Project Team
Relationships.‖ CIEC.
Dupen, Barry. ―How to Design Homework
Assignments for Students Who Use Search
Engines Instead of Their Textbooks.‖ IL/IN.
Dyrud, Marilyn A. ―The Scavenger Hunt: A
Team Building Exercise.‖ ACP.
Dziedzic, Mauricio et al. ―Assessment by Peers–
An Effective Learning Technique.‖ FIE.
Edwards, Robert, and Gerald Recktenwald.
―Guided Inquiry in an Engineering Technology
Classroom.‖ ACP.
Farrell, Ronald et al. ―An Old Tool with a New
Twist: Innovating with Inductive Teaching
Methods.‖ IJME. Paper no. 028.
González, Julio. ―An Interactive Teaching
Approach Based on Student-Teams.‖ FIE.
Gorbet, R. B. et al. ‖Best Practices for Enabling
Effective Cross-Disciplinary Learning in
Interdisciplinary Project Groups.‖ The
International Journal of Engineering Education
24, no. 3 (2008): 495-508.
Kraemer, David R. B. ―Using a Plagiarism-
Catching Computer Program as a Teaching
Tool.‖ NMW.
Litzinger, Thomas et al. ―Identifying and
Remediating Deficiencies in Problem-Solving
in Statics.‖ ACP.
Luechtefeld, R. et al. ―Training for Self-Managed
Student Teams.‖ The International Journal of
Engineering Education 24, no. 6 (2008): 1139-
47.
Manuel, M. V. et al. ―Hierarchical Model for
Coaching Technical Design Teams.‖ The
International Journal of Engineering Education
24, no. 2 (2008): 260-5.
Marshall, John, and June Marshall. ―Pedagogy:
Review of Best Practices.‖ ACP.
McCormick, Jessica R. ―Crisis Leadership–
Preparing Students for Future Leadership
Roles.‖ CIEC.
McGrann, Roy T. R. ―Philosophy of Technology
in Engineering Education.‖ FIE.
Mott, John. ―A Method for Determining
Minimum Appropriate Lengths of Play for
Classroom Strategic Management
Simulations.‖ IL/IN.
Narang, Ramesh. ―An Innovative Approach of
Team-Teaching Measurement Uncertainty and
Metrology.‖ CIEC.
Ocon, Ralph. ―Teamwork and the Creative
Process: Promoting Creative Thinking through
Teams.‖ ACP.
Parker, Philip J. ―The Effect of Pedagogy on
Knowledge Transfer.‖ NMW.
Perez, Dorene et al. ―A Leadership Team for
Technical Students.‖ ACP.
Qi, Tom Ziming. ―Industry Oriented Teaching
and Learning Strategies Applied to the Course
within Traditional Engineering Technology
Undergraduate Program.‖ FIE.
Richerson, Samantha, and Deepti Suri.
―Strategies of Assessing Multi-Disciplinary
Collaborative Experiences.‖ ACP.
Samples, Jerry. ―Leadership 104: The Teacher-
Scholar Culture.‖ ACP.
Sgro, Sergio, and Steve Freeman. ―Teaching
Critical Thinking Using Understanding by
Design.‖ ACP.
Steffen, Gary. ―Learning through Error
Recognition Using the Three Strikes Method.‖
ACP.
Tawfik, Aly et al. ―Small Interventions, Big
Impacts: How Modification of Delivery Process
of In-Class Activities for Freshmen Can
Dramatically Improve Learning.‖ ACP.
27
Uhlig, Ronald et al. ―Achieving Compelling
Student Comprehension of Complex
Information Structures for Both On-Site and
On-Line Courses.‖ ACP.
Verma, Alok. ―Introducing Hands-On Simulation
Activities in Introduction to Engineering &
Engineering Technology Classes to Keep
Students Engaged.‖ ACP.
Wentz, Charles H. ―What Do I Want to Be When
I Grow Up? I Do Have CHOICES.‖ CIEC.
Whalen, Richard et al. ―Agile Education: What
We Thought We Knew about Our Classes,
What We Learned, and What We Did about It.‖
ACP.
Wosczyna-Birch, Karen et al. ―Problem Based
Learning Initiative in Collaboration with the CT
College of Technology‘s Center for Life
Support and Sustainable Living.‖ ASME. Paper
no. IMECE 2008-66229.
Yurtseven, Kudret, and Walter W. Buchanan.
―Systems Engineering Education: A Review of
Teaching the Subject Matter.‖ INTERTECH.
Zhan, Wei et al. ―Life Long Learning Starts in
Classrooms.‖ ACP.
Tech Prep
Allameh, Seyed et al. ―Assessing the Outcomes of Two Summer Camps at NKU.‖ ACP.
Burghardt, David, and Michael Hacker. ―Math
Infusion in a Middle School Engineering/Technology Class.‖ WIP. FIE.
Burghardt, M. David, and Michael Hacker.
―Development of a Math Infusion Model for
Middle School Engineering/Technology Education.‖ ACP.
Casey , A. J., and S. T. Goodfellow. ―Creation of
a Science, Engineering & Technology Road Show Utilising Thermal Imagery.‖ ICEE.
Devine, Kevin. ―Designing an Industrial Automation Lab for K-12 Outreach.‖ IL/IN.
Elmore, Bill B., and Emma Seiler. ―Using
LEGO Robotics for K-12 Engineering Outreach.‖ SEE.
Fuehne, Joseph. ―Evolution of an Engineering Technology Outreach Program.‖ ACP.
Grossfield, Andrew. ―Wonder, Discovery and
Intuition in Elementary Mathematics.‖ Zone.
Holverson, Clyde et al. ―UWP FIRST Robotics Team Experiences.‖ NMW.
Isaacs, Jacqueline et al. ―Geckoman–An
Interactive Game Based on the Principles of Nanoscale Forces.‖ ACP.
Johns, Debra S. ―Pre-College Preparation in
Math, Science, and Engineering for K-12 Children.‖ GSW.
Katsioloudis, Petros. ―Identification of Quality
Indicators of Visual-Based Learning Material in
Technology Education Programs for Grades 7-
12.‖ ACP, SEE.
Korpela, Karla et al. ―University & Community
Partnerships: Growing the Numbers of
Underrepresented Students in the STEM Pipeline.‖ ACP.
Krause, Steve et al. ―High School Teacher
Change, Strategies, and Actions in a
Professional Development Project Connecting Mathematics, Science, and Engineering.‖ FIE.
Lam, Paul et al. ―Fostering STEM Based
Education for Middle School Students n Learning Disability Related IEPs.‖ NC.
Landgraf, Lisa et al. ―Recruitment and Retention
of Women in STEM: Effectiveness of Current
Outreach Programs at University of Wisconsin-Platteville.‖ NMW.
28
Mähönen, Petri et al. ―A Novel Partnership of a
School and a University: Using the Work of
University Students to Enhance Science
Teaching and to Foster Interest to Technology
in K-12 Schools.‖ FIE.
Mano, Chad D., and Vickie Allen. ―Adopt a
School–The Foundation of a Long-Term
Outreach Effort.‖ WIP. FIE.
Marshall, John. ―Establishing a High
School/Engineering Partnership with a Simple
Industrial Process Control Module.‖ ACP.
Pelletier, Michael et al. ―Professional
Development Institutes on Alternative Energy.‖
ACP.
Plotkowski, Paul et al. ―Empowering Girls:
Measuring the Impact of Science Technology
and Engineering Preview Summer Camps (STEPS).‖ ACP.
Riley, Linda, and Charles Thomas. ―Keeping the
STEM Pipeline Flowing: An Innovative
Partnership between a K-12 School System and an Institution of Higher Learning.‖ Zone.
Rockland, Ronald et al. ―Engineering Technology
as a Vehicle for Putting Qualified Technology Teachers in High School Classrooms.‖ ACP.
Rutz, Eugene et al. ―Accessible STEM Education.‖ ACP.
Rutz, Eugene et al. ―From 0 to 60 in 1 Year.‖
ACP.
Sanders, Mark. ―The Nature of Technology Education in the U.S.‖ ACP.
Schaffer, Ralph et al. ―High School Recruiting That Works: The ‗Day in College.‘‖ ACP.
Spence, Anne. ―Importance of Engaging K-12.‖
CIEC.
Tate, Nathan E. et al. ―Introducing STEM
Concepts to Middle-School Students through Interactive Learning.‖ NC.
Vadiee, Nader. ―Information Technology
Experiences Using Simulated Tele-Science Exploration of Mars (ITESTEM).‖ GSW.
Wilkins, Leslie, and Isla Young. ―Service
Learning: Community and Cultural Values That
Engage Under- Represented Groups into the STEM Pipeline.‖ ACP.
Wright, Ann, and Kumar Yelamarthi. ―Outreach
Programs to Increase Awareness of STEM Disciplines in K-12 Students.‖ NC.
Yousuf, Asad et al. ―High School and University
Collaborative Engineering Technology Project.‖ IJME. Paper no. 017.
Yousuf, Asad et al. ―Upward-Bound/Junior
Engineering Technology Summer Program.‖ ACP.
Technical Communication
Anthony, Linda et al. ―Discourse-Based
Communities of Practice: Developing Graduate
Students‘ Abilities to Communicate Their
Research across Disparate Disciplines and Experience Levels.‖ ACP.
Aubertin, Donald. ―Writer-Centered Education:
Implementing Community-Based Learning in Upper Division Writing Courses.‖ ACP.
Bauer, Christine, and Kathrin Figi. ―‗Active
Learning‘ in Written Online Communication–A
Case Study in a Course on ‗Soft Skills for Computer Scientists.‘‖ FIE.
Bauer, Donna, and Gül Okudan. ―Group
Communication via Technology for
29
Engineering Work: Perceptions on Effectiveness.‖ ACP.
Cass, Aaron G., and Chris S. T. Fernandez.
―Simulated Conference Submissions: A
Technique to Improve Student Attitudes about Writing.‖ FIE.
Cox, Leroy R., and Katie A. Grantham Lough.
―The Importance of Writing Skill to the Engineering Student.‖ SEE.
Frampton, Beth. ―Use as Directed.‖ Intercom 55, no. 6 (June 2008): 6-9.
Hoffa, David, and Steven Freeman. ―Synopsis
Laboratory Reports: Effects on Student Learning and Curricular Benefits.‖ ACP.
Henry, Maren, and Eric Granlund. ―Rhetoric of
Grammar for Engineers: Developing a WAC
(Writing across the Curriculum) Workshop for Engineering Technology Students.‖ ACP.
Johnson, Carol Siri. ―The Evolution of Technical
Communication at Lukens Steel, 1810-1925.‖ Zone.
Magleby, Alyssa, and Cynthia Furse. ―Lab Report Writing (and Teaching) Made Easy.‖ ACP.
McMurray, David A., and Joanne Buckley. A
Writer’s Handbook for Engineers. Toronto: Cengage Learning, 2008.
Mirth, John A. ―‗Do It Again‘–A Study on the
Use of the Rewrite as a Mastery Learning Tool.‖ NMW.
Mohan, Terry et al. Communicating as
Professionals. Toronto: Cengage Learning, 2008.
Norback, Judith et al. ―Communication
Instruction in an Engineering Introductory Statistics Course.‖ ACP.
Paretti, Marie C. ―Teaching Communication in
Capstone Design: The Role of the Instructor in
Situated Learning.‖ Journal of Engineering
Education 97, no. 4 (October 2008): 491-503.
Parker, Philip J. ―Using Laboratory Reports to Improve Student Writing.‖ NMW.
Potter, Leslie et al. ―A New Engineering
Communications Course Based on a Professional Communication Process.‖ ACP.
Raju, Ritu. ―Schemas in Intercultural
Communication.‖ Intercom 55, no. 5 (May 2008): 18-20.
Ross, Paul. ―Maintaining an Engineering Portfolio.‖ ACP.
Schuurman, Mieke et al. ―Assessment of
Students‘ Oral Communication Skills: Do
Students and Workplace Supervisors Rely on General Response Patterns?‖ ACP.
Schuurman, Mieke et al. ―The Effect of a
Targeted Speech Communication Course on the
Public Speaking Self-Efficacy of Engineering
Undergraduates.‖ ACP.
Siefert, Andrew W. ―Communication Skills in English and Engineering: A Critical Need.‖ NC.
Wilson, Laura et al. ―Developing a Writing in the
Disciplines Program in an Engineering Technology College.‖ ACP.
Technical Graphics
Branoff, Theodore, and Eric Wiebe. ―Face-to-
Face, Hybrid, or Online? Issues Faculty Face
Redesigning an Introductory Engineering
Graphics Course.‖ ACP.
Branoff, Theodore J., and Eric N. Wiebe.
―Implementing as Hybrid Introductory Engineering Graphics Course.‖ SEE.
30
Clark, Aaron et al. ―The Attitudes and Opinions
of Students toward Technical Graphics: Preliminary Survey Results.‖ ACP.
Condoor, Sridhar et al. ―The Art of Design
Modeling–Teaching Freshmen Graphics Course.‖ ACP.
Duff, Jon. ―Models for Evaluating Visualization Center Effectiveness.‖ ACP.
Durfee, Jason, and Donald Richter. ―Using a
Two-Course Sequence in Technical Drawing in
the Engineering Technology Curriculum That
Establishes a Baseline of Knowledge, Promotes
Independent Work and Life-Long Learning,
and Introduces Students to Rapid Prototyping.‖ ACP.
Irwin, John. ―Graphics Course Formative
Feedback and Teaching Innovation Using
Screen Capture Technology.‖ IJME. Paper no. 089.
Gorska, Renata and Sheryl Sorby. ―Testing
Instruments for the Assessment of 3-D Spatial Skills.‖ ACP.
Grabowski, Ralph. Using AutoCAD 2008 Basics. Clifton Park, NY: Delmar, 2008.
Haidari, Farezin. ―Implementation of
CAD/CAM/CNC Curriculum Using Mastercam X Software in Technical Programs.‖ ACP.
Hamlin, Amy et al. ―Impact of Spatial
Visualization Topic Order on Student Performance and Attitudes.‖ ACP.
Kalameja, Alan J. AutoCAD 2008 Tutor for
Engineering Graphics. Clifton Park, NY: Delmar, 2008.
Lamit, Louis Gary. PRO/Engineer Wildfire 4.0. Toronto: Cengage Learning, 2008.
Melton, David W., and Gary A. Stewardson. ―The
American Drafter: Why Use 1st Angle
Projection in a 3rd Angle World?‖ The
Technology Interface 9, no. 1 (Fall 2008).
Available at http://technologyinterface.nmsu.edu/Fall08/ .
Richard, Fitzgerald. Introduction to AutoCAD
2008: A Modern Perspective. Upper Saddle River, NJ: Prentice Hall, 2008.
Shih, Randy. AutoCAD 2009 Tutorial–First
Level: 2D Fundamentals. Mission, KS: SDC Publications, 2008.
Shih, Randy. AutoCAD 2009 Tutorial–Second
Level: 3D Modeling. Mission, KS: SDC Publications, 2008.
Shih, Randy. AutoCAD LT 2009 Tutorial. Mission, KS: SDC Publications, 2008.
Shih, Randy. Parametric Modeling with Inventor
2009. Mission, KS: SDC Publications, 2008.
Shih, Randy. Principles and Practices–An
Integrated Approach to Engineering Graphics
and AutoCAD. Mission, KS: SDC Publications, 2008.
Study, Nancy. ―The Haptic Abilities of a Sample
of Minority Engineering and Technology Students.‖ ACP.
Tickoo, S. AutoCAD 2009: A Problem Solving
Approach. Florence, KY : Autodesk Press, Delmar Cengage, 2008.
Tickoo, S. AutoCAD LT 2009 for Designers.
Schererville, IN : CADCIM Technologies, 2008.
Tickoo, S. Autodesk Inventor 2009 for Designers.
Schererville, IN: CADCIM Technologies, 2008.
31
Tickoo, S. CATIA V5R18 for Designers.
Schererville, IN : CADCIM Technologies, 2008.
Tickoo, Sham. Customizing AutoCAD 2008. Clifton Park, NY: Delmar, 2008.
Tickoo, S. Pro/ENGINEER Wildfire 4.0 for
Designers Textbook. Schererville, IN : CADCIM Technologies, 2008.
Tito-Izquierdo, Jorge, and Alberto Gomez-Rivas.
―A Spreadsheet Template with Scaled Graph Options Useful for Engineering Classes.‖ ACP.
Whittington, Jana et al. ―Meeting Student and
Industry Needs through Experiential Learning
and Soft Skills Study in Computer Graphics.‖ ACP.
Acknowledgments
The annual bibliography is a special project of
ASEE‘s Engineering Technology Council. Our
thanks to the many engineering technology
professionals who took time from their busy schedules to contribute their publication listings.
Biography
Marilyn Dyrud is a full professor in the
Communication Department at Oregon Institute
of Technology and regularly teaches classes in
business and technical writing, public speaking,
rhetoric, and ethics; she is part of the faculty team
for the Civil Engineering Department‘s integrated
senior project.
She is active in ASEE as a regular presenter,
moderator, and paper reviewer; she has also
served as her campus‘ representative for 17 years,
as chair of the Pacific Northwest Section, and as
section newsletter editor. She was named an
ASEE Fellow in 2008 and has compiled the
bibliography for more than 20 years. Currently,
she serves on two division boards: Engineering Technology and Engineering Ethics.
In addition to ASEE, Marilyn is active in the
Association for Practical and Professional Ethics
and the Association for Business Communication,
serving on the editorial boards of two journals
and editing a teaching column for ABC‘s pedagogical journal