MAKE THE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE
BASIC COMPETENCY
Seni Kerajinan dan Pariwisata
FOR CLASS XI SEMESTER.1
STUDENTS UNDERSTAND THE PROCESS OF MAKING THE MOLD FOR ONE-SIDE IMPRESS
TECHNIQUE
STUDENTS ARE ABLE TO MAKE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE
Seni Kerajinan dan Pariwisata
Seni Kerajinan dan Pariwisata
Making the gypsum mold
COMPETENCY STANDARD
BASIC COMPETENCY BASIC COMPETENCYBASIC COMPETENCY
Preparing thegypsum massto makethe mold
Make the gypsum moldfor one-side impress technique
Make the gypsum mold for two-or-moreside slip technique
COMPETENCY MAPPING
LEARNING MATERIALSLEARNING MATERIALS
One side mold is a mold that has only one surface.
It can be done using either concave or convex mold.
Seni Kerajinan dan Pariwisata
Model
Mould
Product Mould
LEARNING MATERIALSLEARNING MATERIALS
Picture of concave mold and its product
Seni Kerajinan dan Pariwisata
Picture of convex mold and its product.
Picture of unhooked concave mold.
Picture of hooked mold.
Gambar penampang cetakan tekan yang ada sangkutannya
THE PROCESS OF MOLD MAKING THE PROCESS OF MOLD MAKING
Tools
Seni Kerajinan dan Pariwisata
Wooden casting box
brush
Ribbon Tool
Bowl
Panel base
THE PROCESS OF MOLD MAKING THE PROCESS OF MOLD MAKING
Seni Kerajinan dan Pariwisata
Materials
• Gypsum/plaster • Water
Separator
made from the mixture of water, vegetable oil and
detergent, then heat it.
WORKING STEPSWORKING STEPS
1. Put the model on the panel base, then nub with separator so that it will be easily released.
Seni Kerajinan dan Pariwisata
2. Install the panel base on the four side of the model with 4 cm distance from the model. Then put the flexible clay on the connected part to avoid the flowing gypsum slip.
WORKING STEPSWORKING STEPS
3. Make gypsum slip to make mold.
4. Pour the slip on the model carefully so that all the model surface covered thoroughly and let it harden.
Seni Kerajinan dan Pariwisata
THE WORKING STEPSTHE WORKING STEPS
5. Open the panel base after the gypsum harden then trim the surface.
6. Release the model from the mold then clean and dry it.
Seni Kerajinan dan Pariwisata
7. A ready to use gypsum mold
COMPETENCY LINKCOMPETENCY LINK
Seni Kerajinan dan Pariwisata
PLEASE LEARN THE NEXT COMPETENCY
Make the gypsum for two-or-more impress technique
Hall. Morgen. 1997. The Potter’s Primer. A step by Step. Apple Press. London
Mattison, Steve .1998, . Ceramics, Step BY Step Instructions for 18 delightful projects, Apple Press. London.
Tim Studio Keramik. 2007. Modul Pendidikan Dan Pelatihan, P4TK Seni Dan Budaya Yogyakarta.
Seni Kerajinan dan Pariwisata
Wahyu Gatot Budiyanto, 2008. Kriya Keramik Untuk Sekolah Menengah Kejuruan , BSE , Jilid. 1,2,3 .Direktorat Pembinaan Sekolah Menengah Kejuruan, Jakarta .
Seni Kerajinan dan Pariwisata
Written by
Nana Turmono, S.Pd.
Translated by
Florentina Sri Wartini, S.Pd
SEE YOU AT THE NEXT COMPETENCY