Download - 42629 lecture 5 pt 1
Integrated Product Development
Customer Research, Market & ForecastingJakob A. Bejbro [email protected]
Unless otherwise stated, this material is under a Creative Commons 3.0 Attribution–Share-Alike licence and can be freely modified, used and redistributed but only under the same licence and if including the following statement:
“Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark”
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
2
Agenda for lecture 58:30 Customer research 9:00 Break9:15 Guest lecture by Tobias Toft
(Interaction designer at IDEO in Palo Alto)
9:45 Break10:00 Value Proposition and Market Description10:45 Break11:00 Forecasting
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
3
Your Objective: • Convince the investor that:
– There is a need for your product.– You are in unique position to address this need.– You know where to start and how to spend the money.– You will start making money soon.– You will return the investment tenfold very soon.
SOLD!
Customer ResearchLinking need and product / service – gaining an advantage
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
5
Who is the customer• Customers can be easily identifiable or elusive.• This tends to relate to the maturity of the market.
Market type Knowledge about customer
Pros Cons
Mature • Consensus reached.• Possibly ”locked in”.• Rarely updated
• Easy to get overview.• References underline differentiation.
• Need for disruptive innovations.• Competition from big, wealthy companies.• 2nd mover advantage
New / Reframed
• Unlikely to be readily available.• Potential for uncovering extensive, unadressed needs
• 1st mover advantage.• Customer knowledge hard to replicate.
• No track record in market.• A lot of work to do.• Complexity.
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
6
Customer types – who needs what?
• A product’s success lies in its ability to provide value to the key stakeholders.
You have to figure out…
• Who uses it? • Who approves it?• Who purchases it?• Who sees the vision? • Who …?
(normal focus)
The happy employees of Company X
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
7
Intermediate level
A ”who’s who” for Company X (B2B)
Worker 1
Worker 2
Worker 3
Operations
manager
External energy advisor
Chief Operatio-nal officer
Operations
manager
Head of procure-
ment
Board/
Chief Executive
Officer
Chief financial officer
Strategic level
Operational level
Managerial level
More ergonomic!
Less noise!
Easier to use
Has to interface
w. other technologies.
Has to be
environmentally
friendly.
Needs to create good
PR for our company
Numbers have to
add up. Only under certain
conditions!
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
8
Exercise 1
In each group map the key stakeholders for your product.
Think about:• Who uses it? • Who approves it?• Who purchases it?• Who sees the vision? • Who …?
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
9
Mapping needs (organisational levels)
• Different of organisations communicate and operate in different ways.
• Sources of knowledge vary between levels.
Approach 4
Approach 3
Approach 2
Approach 1
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
10
Mapping needs (Strategic level)
• Look for reports, press releases, media coverage.
• This level tends to communicate a lot.
From: www.maersk.com
www.ikea.com
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
11
Mapping needs (Managerial/Intermediate level)
• Generally not the most accessible part of organisations
• Look for references: What else are they buying?• Find persons with experience in the area.
– Use networks organisations (Connect DK, Væksthus Hovedstaden)
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
12
Mapping needs (Operational level)
• Interviews, observation.• Photo/Video documentation.• Surveys.• User specific fora – what is being discussed?
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
13
Mapping needs (over time)
• The needs of the customer change over time.
• The role of the product changes between different activities.
• Customer Activity Cycles* (CACs) can be used to map needs over time.
*(Vandermerwe, 2000)
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
14
Mapping needs (the CAC)
Figure courtesy of Krestine Mougaard and Shin Knudsen (master thesis 2009)
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
15
Exercise 2
In each group write down ways of investigating and describing the needs of your stakeholders.
Example 1:
Contact sales
manager and get
his input on the
needs of the end
user
Example 2:Look at the company website to find press releases.
Example 3:
Contact doctor to
hear what patients
tend to need…
and, if possible,
get contacts to
patients.
Example 4:Do a survey among friends who
use facebook to find out why they
are using social networking websites.Example 5:
Use a customer
activity cycle to map
the interactions
between sailors and
the product.
You have big groups:
Everyone should be investigating seperate leads!
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
16
Q?
2012Original material by Jakob A. Bejbro Andersen for course 42629 – Innovation and Product Development Department of Mechanical Engineering, The Technical University of Denmark
17
After the 15 minute break (at 9:15 sharp):
Guest lecture on User Centered Design
By Tobias Toft, Interaction designer at IDEO
Live from Palo Alto, California (00:15 AM local time):
www.ideo.com