American Metric® Corporation 65
INDUSTRIAL MOTORS
5.0 METRIC IEC STANDARD MOTORS
Three-Phase Aluminum Frame
Single Phase Motors
Brake Motors
Slip Ring Motors Squirrel Cage with Air/Air Exchanger
Flame Proof Motors
Increased Safety Motors
Drip Proof Motors
Ametric® Page 1 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
66 American Metric® Corporation
INDUSTRIAL MOTORS
5.1 OUTPUT RANGEThe present catalog deals with TEFC, three-phase, squirrelcage induction motors (Series BF) with shaft heights from 71up to 400 mm, in the following ranges:
0.37 up to 500 kW - 3000 rpm0.185 up to 500 kW - 1500 rpm0.12 up to 400 kW - 1000 rpm0.09 up to 315 kW - 750 rpm
For either higher output and larger size motors and/or otherspeeds or voltages, please contact our Special ProductsDepartment.
5.2 STANDARDS•DIMENSIONAL STANDARDSThe main dimensions of our BF series TEFC motors areaccording to IEC 72-1 (1991) that refers:
- the dimensions of foot-mounted motors,- the dimensions of mounting flanges,- the shaft extension dimensions,- the preferred output values.
•INTERCHANGEABILITY STANDARDSBF series TEFC motors are in accordance with CENELECharmonization document HD 231 and also with most nationalinterchangeability standards.
•QUALITY STANDARDSThe rating and performance of BF series TEFC motors meetthe standards laid down in IEC 34-1 (1983). Their perfor-mances are also in accordance with most national standardsspecifically VDE 0530, NBN C 51-101, NF C 51-111. Ifrequired, the performances of BF motors may be changed andthereby adapted to special requirements or other nationalstandards.
5.3 GENERAL CHARACTERISTICSThe characteristics listed below are the standard ones. Ifrequested, others may be available.
•MECHANICAL PROTECTIONThe standard degree of mechanical protection for motors,series BF4, is IP 54 and for motors, series BF5 and BF6, isIP 55 according to IEC 34-5 (1991).
•VOLTAGE AND FREQUENCYMOTORS WITH FRAME SIZE UP TO 160
These motors are wound to work at either 50 Hz or 60 Hz, in thefollowing voltage ranges:
For any voltage value in these ranges, a variation of -5% to+6% is allowed according to the majority of the standards.The electrical characteristics detailed in this catalog apply tothe standard voltages/frequencies shown above. Strictlyspeaking, these values will vary slightly with actual voltageand frequency, but the variations will generally remain withinthe tolerances given in IEC 34-1 (1983).
MOTORS WITH FRAME SIZES 180 AND ABOVEThese motors are wound for operation only at one of theabove-mentioned voltages and frequencies.
•INSULATIONAll the models referred to in this catalog are class F insulated.
•TEMPERATURE RISEAlthough the maximum temperature rise allowed for class Finsulation will be 105 K, in general, the temperature rise of BFmotors is below 80 K measured by resistance variationaccording to IEC 34-1 (1983).
•NOISE LEVELBF series TEFC motors meet IEC 34-9 (1990) concerningnoise limits.
•DYNAMIC BALANCINGBF series TEFC motors are dynamically balanced with a halfkey according to IEC 34-14 (1982).
5.4 CONSTRUCTION•CASINGIn sizes up to 160 the stator frame, the IM 1001 drive-endendshield, the non-drive and endshield, and the terminal boxare high-pressure die-cast in aluminum alloy. However, theendshields have integral cast iron liners forming the bearinghousings. Flange endshields are in cast iron. In sizes 180 upto 225, the stator frame and the terminal box are low pressuredie-cast also in aluminum alloy, the endshields being in castiron. In sizes 250 and above, all of these parts are in cast iron.
TOTALLY ENCLOSED FAN-COOLEDTHREE-PHASE, SQUIRREL-CAGE MOTORSLOW VOLTAGE
} For outputs up to3 kW/3.6 kW
For the remaining outputs
..... 220-240/250-280 V 50/60 HzY 380-415/440-480 V 50/60 Hz
..... 380-415/440-480 V 50/60 Hz
Ametric® Page 2 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 67
INDUSTRIAL MOTORS
•EARTH CONNECTIONAll motors are equipped with an earth screw or an earth barinside the terminal box. Earth bars are used on size 250 andabove. All motors size 112 and above have a second earthscrew or earth bar on one foot or on the flange as the case maybe.
•BEARINGS AND LUBRICATIONThe motors of series BF5 are equipped on both sides withdeep groove ball bearings greased for life and pre-loaded byan axial spring washer. The motors of series BF4 are equip-ped with a roller bearing on one side and a deep groove ballbearing on the other side. Grease nipples and grease valvesare provided on both sides. The motors of series BF6 areequipped on both sides with deep groove ball bearings andpre-loaded by an axial spring washer. Grease nipples andgrease valves are provided on both sides.
The standard drive end bearing will be replaced by a rollerone when belt transmission is used or by an angular contactbearing when the mounting form is vertical. The bearingtypes for the motors referred to in this catalog are as follows:
In IP55 motors the following V-Ring joints are used:
•FAN AND FAN COVERUp to shaft height 160, the motors are equipped with a poly-propylene fan, radially protected by a cover in aluminum alloythat is an integral part of the endshield, and axially protectedby a polypropylene grid.
Motors of shaft height 180 and above are equipped with fansthat can be made from polypropylene, aluminum alloy orwelded construction. The fan covers are in stamped steel orwelded constructed.
•SQUIRREL CAGEThe squirrel cages are in die-cast aluminum, the casting beingby high-pressure or by centrifugation. However, the cages ofthe motors BF6 400, or 1000 and 750 rpm, are formed bycopper bars brazed to copper end-rings using mediumfrequency technology.
•TERMINAL BOXOn motors up to size 225 the terminal box is an integral partof the frame. Motors, sizes 250 and above, have a conven-tional terminal box that can rotate 180°. As standard in thisrange the terminal box entries are on the right side of themotor viewed from shaft end. By rotating the terminal box,these entries can be transferred to the left side. Below are thestandard terminal arrangements and terminal box entries.
BF5 71BF5 80BF5 90BF5 100BF5 112BF5 132BF5 160BF5 180BF5 200BF5 225BF4 250BF4 280BF4 280BF4 315BF4 315BF6 315BF6 315BF6 355BF6 355BF6 400BF6 400
AllAllAllAllAllAllAllAllAllAllAll
3000Other3000Other3000Other3000Other3000Other
6202 2Z C36204 2Z C36205 2Z C36206 2Z C36206 2Z C36208 2Z C36209 2Z C36210 2Z C36212 2Z C36213 2Z C3
NU 3146314 C3NU 3166314 C3NU 3176219 C36220 C36219 C36222 C36219 C36224 C3
6202 2Z C36202 2Z C36204 2Z C36205 2Z C36205 2Z C36208 2Z C36209 2Z C36210 2Z C36212 2Z C36212 2Z C3
6314 C3NU 3146314 C3NU 3166314 C36219 C36219 C36219 C36219 C36219 C36219 C3
MotorType
Speed(rpm) Drive End Non-Drive End
Bearing Reference
BF5 71BF5 80BF5 90BF5 100BF5 112BF5 132BF5 160BF5 180BF5 200BF5 225BF6 315BF6 315BF6 355BF6 355BF6 400BF6 400
AllAllAllAllAllAllAllAllAllAll
3000Other3000Other3000Other
V-14 AV-18 AV-25 AV-30 AV-30 AV-40 AV-45 AV-50 AV-60 AV-65 AV-95 AV-100 AV-95 AV-110 AV-95 AV-120 A
MotorType
Speed(rpm) Drive End Non-Drive End
V-Ring Reference
V-14 AV-14 AV-18 AV-25 AV-25 AV-40 AV-45 AV-50 AV-60 AV-60 AV-95 AV-95 AV-95 AV-95 AV-95 AV-95 A
Quantities and Sizes
Terminals Terminal Box EntriesMotor Types
BF5 71 up to BF5 90BF5 100 and BF5 112BF5 132BF5 160BF5 180BF5 200 and BF5 225BF4 250 and BF4 280BF4 315BF6 315 up to BF6 400
6 x M46 x M46 x M66 x M66 x M86 x M86 x M106 x M106 x M12
2 x ø 22.5 (1)4 x ø 28.5 (2)4 x ø 28.5 (2)4 x ø 37 (2)4 x ø 37 (2)4 x ø 47 (2)2 x Pg 42 (3)2 x Pg 48 (3)2 x Pg 48 (3)
(1) One entry on each side(2) Two entries on each side(3) Two entries on the right side that can be transferred to the left side
Ametric® Page 3 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
68 American Metric® Corporation
INDUSTRIAL MOTORS5.5 TECHNICAL DATA
• NOMENCLATURE KEY
•OUTPUT DERATING CONDITIONSThe outputs presented in the tables concern normal workingconditions according to IEC 34-1 (1983). Environmental andelectrical site conditions (altitude, atmosphere temperature,form and symmetry of voltage, and voltage variation duringthe operation) must be maintained within certain limits inorder to get the nominal output from the motor. If these limitsare not respected, then a reduction of output will occur asstated below:
VoltageThese motors can supply this nominal output only if thevoltage variation is less than 5%. If a greater deviationoccurs, then the output must be reduced to avoid dangerousoverheating. The figures below should be observed:
Ambient TemperatureThese motors can supply their nominal output if the atmo-sphere temperature is no more than 40°C. If a higher atmo-sphere temperature is expected, then the output must bereduced to avoid dangerous overheating. The figures belowshould be observed:
AltitudeThese motors were designed to operate at an altitude notexceeding 1000 m above sea level. If site conditions exceedthis altitude, the following output reduction must be made:
•DIRECTION OF ROTATIONThe motors up to a shaft height of 355 are equipped with a bi-directional fan so that they can turn in both directions. Motorsof shaft height 400 are equipped with directional fans. Therequired direction of rotation of these motors must be speci-fied in the order.
•DRAIN HOLESThe motors up to shaft height 160 are not provided with drainholes. All the remaining motors have drain holes whoselocation depends on the mounting form of the motor.
•NORMAL MOUNTINGSThe normal mounting positions are the following, identified inIEC 34-7 code II:
BF 5 160 M 4 2
Number of Poles
Code for Length of Core
IEC Code for Length of Frame
IEC Shaft Height (mm)
Design Number
Code for TEFC Motors
Altitude AboveSea Level
(m)
Output Reduction forAtmosphere Temperature of
1000200030004000
40°C0%6%
12%18%
25°C0%0%0%6%
Voltage Deviation Output Reduction
± 5%± 7.5%± 10%
0%5%
10%
Ambient Temperature Output Reduction
40°C45°C50°C55°C60°C
0%5%
10%15%20%
IM 1001 IM 3001
IM 3601 IM 2001
IM 2101 IM 3011
IM 3611 IM 1011
Motor with feet down. One shaftend.
Motor without feet. One shaftend. Drive end flange mountingwith free fixing holes. Horizon-tally mounted (available up totype BF4 315).
Motor without feet. One shaftend. Drive end flange mountingwith threaded fixing holes. Hori-zontally mounted (available up totype 112).
Motor with feet down. One shaftend. Drive end flange mountingwith free fixing holes. Horizon-tally mounted.
Motor with feet down. One shaftend. Drive end flange mountingwith threaded fixing holes. Hori-zontally mounted.
As IM 3001, but vertically moun-ted with shaft end down.
As IM 3601, but verticallymounted with shaft end down.
Motor with feet. Vertically moun-ted with shaft end down.
Ametric® Page 4 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 69
INDUSTRIAL MOTORS
Ametric® Motor Part Number Breakdown
Ametric® Motors are generally:1. AC2. Three Phase3. IEC Standard4. Class F5. Totally Enclosed Fan Cooled6. 50Hz/60Hz7. NOT Premium Effeciency Rated
2 Pole = 3600rpm@60Hz with nominal load (3000rpm@50Hz)4 Pole = 1800rpm@60Hz with nominal load (1500rpm@50Hz)6 Pole = 1200rpm@60Hz with nominal load (1000rpm@50Hz)8 Pole = 900rpm@60Hz with nominal load (750 rpm@50Hz)
Please see the catalog for further details!
B F 5 7 1 M 4 4 G . 3 7
Three Phase Frame Length KW RatingAC Motor Size Thru Core @ 50Hz
Small, Mediumand Large
50Hz = “European”60Hz = “American”
BFF5 = Brake Motor
7200 / # of Poles = RPM
NotUsed
Numberof Poles
Type ofMount
B14 = Small FlangeG = B5 = Large Flange
P = Foot Mount
Ametric® Page 5 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 83
60Hz* 3600RPM 2 Pole250-280 or 440-480V
50Hz* 3000RPM 2 Pole220-240V or 380-415V
footfoot
footfoot
footfootfoot
footfoot
footfoot
foot
foot
footfootfoot
footfootfoot
foot
footfoot
foot
foot
footfoot
footfoot
footfoot
footfootfootfoot
footfootfoot
0.090.13
0.180.25
0.250.370.55
0.751.1
1.52.2
3
4
5.57.59
1115
18.5
22
3037
45
55
7590
110132
160200
250280315355
400450500
0.120.17
0.250.34
0.340.500.74
1.011.47
2.012.95
4.02
5.36
7.3710.0512.06
14.7520.1124.80
29.49
40.2149.60
60.32
73.73
100.54120.64
147.45176.94
214.48268.10
335.12375.34422.25475.87
536.19603.22670.24
––
3.94.3
5.85.85.8
9.09.0
1214
20
24
394554
657083
120
149185
195
445
455500
735805
1,0151,160
1,3251,4501,6501,820
2,3002,5002,700
BF7 56M22 P 0.09BF7 56M42 P 0.13
BF7 63M22 P 0.18BF7 63M42 P 0.25
BF5 71M42 P 0.25BF5 71M42 P 0.37BF5 71M42 P 0.55
BF5 80M42 P 0.75BF5 80M42 P 1.1
BF5 90S22 P 1.5BF5 90L42 P 2.2
BF5 100L42 P 3
BF5 112M22 P 4
BF5 132S42 P 5.5BF5 132S62 P 7.5BF5 132S62FS P 9
BF5 160M22 P 11BF5 160M42 P 15BF5 160L62 P 18.5
BF5 180M42 P 22
BF5 200L62 P 30BF5 200L82 P 37
BF5 225M42 P 45
BF4 250M42 P 55
BF4 280SA42 P 75BF4 280MA62 P 90
BF4 315SA42 P 110BF4 315MA62 P 132
BF6 315L22 P 160BF6 315L42 P 200
BF6 355M02 P 250BF6 355M22 P 280BF6 355M42 P 315BF6 355L62 P 355
BF6 400L02 P 400BF6 400L22 P 450BF6 400L42 P 500
BF7 56M22 G 0.09BF7 56M42 G 0.09
BF7 63M22 P 0.18BF7 63M42 P 0.25
BF5 71M42 G 0.25BF5 71M42 G 0.37BF5 71M42 G 0.55
BF5 80M42 G 0.75BF5 80M42 G 1.1
BF5 90S22 G 1.5BF5 90L42 G 2.2
BF5 100L42 G 3
BF5 112M22 G 4
BF5 132S42 G 5.5BF5 132S62 G 7.5BF5 132S62FS G 9
BF5 160M22 G 11BF5 160M42 G 15BF5 160L62 G 18.5
BF5 180M42 G 22
BF5 200L62 G 30BF5 200L82 G 37
BF5 225M42 G 45
BF4 250M42 G 55
BF4 280SA42 G 75BF4 280MA62 G 90
BF4 315SA42 G 110BF4 315MA62 G 132
BF6 315L22 G 160BF6 315L42 G 200
BF6 355M02 G 250BF6 355M22 G 280BF6 355M42 G 315BF6 355L62 G 355
BF6 400L02 G 400BF6 400L22 G 450BF6 400L42 G 500
flangeflange
flangeflange
flangeflangeflange
flangeflange
flangeflange
flange
flange
flangeflangeflange
flangeflangeflange
flange
flangeflange
flange
flange
flangeflange
flangeflange
flangeflange
flangeflangeflangeflange
flangeflangeflange
0.090.13
0.180.25
0.250.370.55
0.751.1
1.52.2
3
4
5.57.59
1115
18.5
22
3037
45
55
7590
110132
160200
250280315355
400450500
0.120.17
0.250.34
0.340.500.74
1.011.47
2.012.95
4.02
5.36
7.3710.0512.06
14.7520.1124.80
29.49
40.2149.60
60.32
73.73
100.54120.64
147.45176.94
214.48268.10
335.12375.34422.25475.87
536.19603.22670.24
––
3.94.3
5.85.85.8
9.09.0
1214
20
24
394554
657083
120
149185
195
445
455500
735805
1,0151,160
1,3251,4501,6501,820
2,3002,5002,700
STANDARD MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 6 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
84 American Metric® Corporation
60Hz* 1800RPM 4 Pole250-280 or 440-480V
50Hz*
BF7 56M44 P 0.09
BF7 63M24 P 0.12BF7 63M44 P 0.18
BF5 71M44 P 0.18BF5 71M44 P 0.25BF5 71M44 P 0.37
BF5 80M44 P 0.55BF5 80M44 P 0.75
BF5 90S24 P 1.1BF5 90L44 P 1.5
BF5 100L24 P 2.2BF5 100L44 P 3
BF5 112M44 P 4
BF5 132S44 P 5.5BF5 132M84 P 7.5BF5 132M84FS P 9
BF5 160M44 P 11BF5 160L64 P 15
BF5 180M44 P 18.5BF5 180L64 P 22
BF5 200L64 P 30
BF5 225S24 P 37BF5 225M44 P 45
BF4 250M44 P 55
BF4 280SA44 P 75BF4 280MA84 P 90
BF4 315SA44 P 110BF4 315MA64 P 132
BF6 315L24 P 160BF6 315L44 P 200
BF6 355M04 P 250BF6 355M24 P 280BF6 355M44 P 315BF6 355L64 P 355
BF6 400L24 P 400BF6 400L44 P 450BF6 400L64 P 500
foot
footfoot
footfootfoot
footfoot
footfoot
footfoot
foot
footfootfoot
footfoot
footfoot
foot
footfoot
foot
footfoot
footfoot
footfoot
footfootfootfoot
footfootfoot
BF7 56M44 G 0.09
BF7 63M24 P 0.12BF7 63M44 P 0.18
BF5 71M44 G 0.18BF5 71M44 G 0.25BF5 71M44 G 0.37
BF5 80M44 G 0.55BF5 80M44 G 0.75
BF5 90S24 G 1.1BF5 90L44 G 1.5
BF5 100L24 G 2.2BF5 100L44 G 3
BF5 112M44 G 4
BF5 132S44 G 5.5BF5 132M84 G 7.5BF5 132M84FS G 9
BF5 160M44 G 11BF5 160L64 G 15
BF5 180M44 G 18.5BF5 180L64 G 22
BF5 200L64 G 30
BF5 225S24 G 37BF5 225M44 G 45
BF4 250M44 G 55
BF4 280SA44 G 75BF4 280MA84 G 90
BF4 315SA44 G 110BF4 315MA64 G 132
BF6 315L24 G 160BF6 315L44 G 200
BF6 355M04 G 250BF6 355M24 G 280BF6 355M44 G 315BF6 355L64 G 355
BF6 400L24 G 400BF6 400L44 G 450BF6 400L64 G 500
0.09
0.120.18
0.180.250.37
0.550.75
1.11.5
2.23
4
5.57.59
1115
18.522
30
3745
55
7590
110132
160200
250280315355
400450500
0.12
0.160.25
0.240.340.50
0.741.01
1.472.01
2.954.02
5.36
7.3710.0512.06
14.7520.11
24.8029.49
40.21
49.6060.32
73.73
100.54120.64
147.45176.94
214.48268.10
335.12375.34422.25475.87
536.19603.22670.24
–
3.94.3
5.85.85.8
8.58.5
11.513.5
1821
25
384554
6981
113125
160
183195
390
470550
750820
1,1501,275
1,4101,5201,6301,800
2,4002,6502,880
flange
flangeflange
flangeflangeflange
flangeflange
flangeflange
flangeflange
flange
flangeflangeflange
flangeflange
flangeflange
flange
flangeflange
flange
flangeflange
flangeflange
flangeflange
flangeflangeflangeflange
flangeflangeflange
0.09
0.120.18
0.180.250.37
0.550.75
1.11.5
2.23
4
5.57.59
1115
18.522
30
3745
55
7590
110132
160200
250280315355
400450500
0.12
0.160.25
0.240.340.50
0.741.01
1.472.01
2.954.02
5.36
7.3710.0512.06
14.7520.11
24.8029.49
40.21
49.6060.32
73.73
100.54120.64
147.45176.94
214.48268.10
335.12375.34422.25475.87
536.19603.22670.24
–
3.94.3
5.85.85.8
8.58.5
11.513.5
1821
25
384554
6981
113125
160
183195
390
470550
750820
1,1501,275
1,4101,5201,6301,800
2,4002,6502,880
1500RPM 4 Pole220-240V or 380-415V
STANDARD MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 7 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 85
60Hz* 1200RPM 6 Pole250-280 or 440-480V
50Hz* 1000RPM 6 Pole220-240V or 380-415V
BF7 56M46 P 0.06
BF5 71M46 P 0.12BF5 71M46 P 0.185BF5 71M46 P 0.25
BF5 80M46 P 0.37BF5 80M66 P 0.55
BF5 90S26 P 0.75BF5 90L66 P 1.1
BF5 100L46 P 1.5
BF5 112M46 P 2.2
BF5 132S86 P 3BF5 132M86 P 4BF5 132M86 P 5.5
BF5 160M66 P 7.5BF5 160L66 P 11
BF5 180L46 P 15
BF5 200L26 P 18.5BF5 200L46 P 22
BF5 225M46 P 30
BF4 250M26 P 37
BF4 280SA26 P 45BF4 280MA46 P 55
BF4 315SA46 P 75BF4 315MA66 P 90
BF6 315L26 P 110BF6 315L46 P 132BF6 315L66 P 160
BF6 355M06 P 200BF6 355M26 P 250BF6 355L46 P 280
BF6 400L26 P 315BF6 400L46 P 355BF6 400L66 P 400
–
5.85.85.8
8.59.0
11.515
21
25
444449
7577
123
125140
180
370
450490
680770
1,0501,1001,200
1,5251,7501,940
2,0202,2302,500
BF5 71M46 G 0.12BF5 71M46 G 0.185BF5 71M46 G 0.25
BF5 80M46 G 0.37BF5 80M66 G 0.55
BF5 90S26 G 0.75BF5 90L66 G 1.1
BF5 100L46 G 1.5
BF5 112M46 G 2.2
BF5 132S86 G 3BF5 132M86 G 4BF5 132M86 G 5.5
BF5 160M66 G 7.5BF5 160L66 G 11
BF5 180L46 G 15
BF5 200L26 G 18.5BF5 200L46 G 22
BF5 225M46 G 30
BF4 250M26 G 37
BF4 280SA26 G 45BF4 280MA46 G 55
BF4 315SA46 G 75BF4 315MA66 G 90
BF6 315L26 G 110BF6 315L46 G 132BF6 315L66 G 160
BF6 355M06 G 200BF6 355M26 G 250BF6 355L46 G 280
BF6 400L26 G 315BF6 400L46 G 355BF6 400L66 G 400
0.06
0.120.1850.25
0.370.55
0.751.1
1.5
2.2
34
5.5
7.511
15
18.522
30
37
4555
7590
110132160
200250280
315355400
0.08
0.160.250.34
0.500.74
1.011.47
2.01
2.95
4.025.367.37
10.0514.75
20.11
24.8029.49
40.21
49.60
60.3273.73
100.54120.64
147.45176.94214.48
268.10335.12375.34
422.25475.87536.19
foot
footfootfoot
footfoot
footfoot
foot
foot
footfootfoot
footfoot
foot
footfoot
foot
foot
footfoot
footfoot
footfootfoot
footfootfoot
footfootfoot
5.85.85.8
8.59.0
11.515
21
25
444449
7577
123
125140
180
370
450490
680770
1,0501,1001,200
1,5251,7501,940
2,0202,2302,500
0.120.1850.25
0.370.55
0.751.1
1.5
2.2
34
5.5
7.511
15
18.522
30
37
4555
7590
110132160
200250280
315355400
0.160.250.34
0.500.74
1.011.47
2.01
2.95
4.025.367.37
10.0514.75
20.11
24.8029.49
40.21
49.60
60.3273.73
100.54120.64
147.45176.94214.48
268.10335.12375.34
422.25475.87536.19
flangeflangeflange
flangeflange
flangeflange
flange
flange
flangeflangeflange
flangeflange
flange
flangeflange
flange
flange
flangeflange
flangeflange
flangeflangeflange
flangeflangeflange
flangeflangeflange
STANDARD MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 8 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
86 American Metric® Corporation
STANDARD MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
BF5 71M48 P 0.09BF5 71M48 P 0.12
BF5 80M48 P 0.185BF5 80M68 P 0.25
BF5 90S28 P 0.37BF5 90L68 P 0.55
BF5 100L48 P 0.75BF5 100L48 P 1.1
BF5 112M48 P 1.5
BF5 132S88 P 2.2BF5 132M88 P 3
BF5 160M68 P 4BF5 160M68 P 5.5BF5 160L68 P 7.5
BF5 180L48 P 11
BF5 200L48 P 15
BF5 225S28 P 18.5BF5 225M48 P 22
BF4 250M48 P 30
BF4 280SA48 P 37BF4 280MA68 P 45
BF4 315SA48 P 55BF4 315MA68 P 75
BF6 315L28 P 90BF6 315L48 P 110BF6 315L68 P 132
BF6 355M08 P 160BF6 355M28 P 200BF6 355L48 P 250
BF6 400L68 P 280BF6 400L88 P 315
0.090.12
0.1850.25
0.370.55
0.751.1
1.5
2.23
45.57.5
11
15
18.522
30
3745
5575
90110132
160200250
280315
0.120.16
0.250.34
0.500.74
1.011.47
2.01
2.954.02
5.367.37
10.05
14.75
20.11
24.8029.49
40.21
49.6060.32
73.73100.54
120.64147.45176.94
214.48268.10335.12
375.34422.25
5.85.8
8.59.0
11.515
2121
25
4444
808081
115
140
170180
395
500555
700790
9601,0751,225
1,3601,6001,950
2,4502,650
60Hz* 900RPM 8 Pole250-280 or 440-480V
50Hz* 750RPM 8 Pole220-240V or 380-415V
footfoot
footfoot
footfoot
footfoot
foot
footfoot
footfootfoot
foot
foot
footfoot
foot
footfoot
footfoot
footfootfoot
footfootfoot
footfoot
BF5 71M48 G 0.09BF5 71M48 G 0.12
BF5 80M48 G 0.185BF5 80M68 G 0.25
BF5 90S28 G 0.37BF5 90L68 G 0.55
BF5 100L48 G 0.75BF5 100L48 G 1.1
BF5 112M48 G 1.5
BF5 132S88 G 2.2BF5 132M88 G 3
BF5 160M68 G 4BF5 160M68 G 5.5BF5 160L68 G 7.5
BF5 180L48 G 11
BF5 200L48 G 15
BF5 225S28 G 18.5BF5 225M48 G 22
BF4 250M48 G 30
BF4 280SA48 G 37BF4 280MA68 G 45
BF4 315SA48 G 55BF4 315MA68 G 75
BF6 315L28 G 90BF6 315L48 G 110BF6 315L68 G 132
BF6 355M08 G 160BF6 355M28 G 200BF6 355L48 G 250
BF6 400L68 G 280BF6 400L88 G 315
0.090.12
0.1850.25
0.370.55
0.751.1
1.5
2.23
45.57.5
11
15
18.522
30
3745
5575
90110132
160200250
280315
0.120.16
0.250.34
0.500.74
1.011.47
2.01
2.954.02
5.367.37
10.05
14.75
20.11
24.8029.49
40.21
49.6060.32
73.73100.54
120.64147.45176.94
214.48268.10335.12
375.34422.25
5.85.8
8.59.0
11.515
2121
25
4444
808081
115
140
170180
395
500555
700790
9601,0751,225
1,3601,6001,950
2,4502,650
flangeflange
flangeflange
flangeflange
flangeflange
flange
flangeflange
flangeflangeflange
flange
flange
flangeflange
flange
flangeflange
flangeflange
flangeflangeflange
flangeflangeflange
flangeflange
Ametric® Page 9 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 87
FOOT MOUNTED MOTORSIM FORM 1001; 1002; 1051; 1052; 1061; 1062; 1071; 1072; 1011; 1012; 1031; 1032
MOTORTYPE
BF7 63M
BF7 71M
BF5 80M
BF5 90SBF5 90L
BF5 100L
BF5 112M
BF5 132SBF5 132M
BF5 160MBF5 160L
100
112
125
140140
160
190
216216
254254
—
25
27.5
3030
35
40
5252
6060
—
132
150
171171
195
220
260260
300300
122
140
157
180180
200
211
257257
292292
80
90
100
100125
140
140
140178
210251
—
110
120
127152
175
175
218218
300300
40
45
50
5656
63
70
8989
106108
63
71
80
9090
100
112
132132
160160
8
8
9.5
1010
12
12
1616
1818
164.5
177
192.5
210210
235.5
257.5
295295
356356
52
63
68.5
78.578.5
90.5
88
103103
120120
11
7
10
1010
12
12
1212
14.514.5
203
227
265
283308
350
382.5
478478
606606
—
1 x 22.5
1 x 22.5
1 x 22.51 x 22.5
1 x 28.5
2 x 28.5
2 x 28.52 x 28.5
2 x 372 x 37
—
Pg 16
Pg 16
Pg 16Pg 16
Pg 21
Pg 21
Pg 21Pg 21
Pg 29Pg 29
11
14
19
2424
28
28
3838
4242
23
30
40
5050
60
60
8080
110110
4
5
6
88
8
8
1010
1212
9
11
15.5
2020
24
24
3333
3737
12.5
16
21.5
2727
31
31
4141
4545
M5 x 10
M5 x 10
M6 x 16
M8 x 19M8 x 19
M10 x 22
M10 x 22
M12 x 28M12 x 28
M16 x 36M16 x 36
CableGland
Holeø
a51 SHAFT EXTENSIONS
D E F G GA XA AA AB AC B BB C H HA HD h11 K L
BF7 63 UP TO 160 MOTORS
DIMENSIONS (MM)
B3
THREE-PHASE, SQUIRREL-CAGE MOTORS
Ametric® Page 10 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
88 American Metric® Corporation
THREE-PHASE, SQUIRREL-CAGE MOTORS
FLANGE MOUNTED MOTORSFREE-GOING FIXING HOLES
IM FORM 3001; 3002; 3011; 3012; 3031; 3032THREADED FIXING HOLES
IM FORM 3601; 3602; 3611; 3612; 3631; 3632
MOTORTYPE
BF7 63M
BF7 71M
BF5 80M
BF5 90S
BF5 90L
BF5 100L
BF5 112M
BF5 132S - M
BF5 160M - L
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -36 - -
30 - -
F115F75
F130F 85
F165F100
F165F115
F165F115
F215F130
F215F130
F265F165
F300
11575
13085
165100
165115
165115
215130
215130
265165
300
9560
11070
13080
13095
13095
180110
180110
230130
250
14090
160105
200120
200140
200140
250160
250160
300195
350
8—
8—
8—
10—
10—
12—
12—
12—
13
2.5—
3.52.5
3.53
3.53
3.53
43.5
43.5
43.5
5
90°90°
45°45°
45°45°
45°45°
45°45°
45°45°
45°45°
45°45°
45°
9.5M5
10M6
12M6
12M8
12M8
14.5M8
14.5M8
14.5M10
18.5
122122
140140
157157
180180
180180
200200
211211
257257
292
5252
6363
68.568.5
78.578.5
78.578.5
90.590.5
8888
103103
120
9292
106106
112.5112.5
120120
120120
135.5135.5
145.5145.5
163163
196
203203
227227
265265
283283
308308
350350
382.5382.5
478478
606
——
22.522.5
22.522.5
22.522.5
22.522.5
28.528.5
28.528.5
28.528.5
37
——
Pg 16Pg 16
Pg 16Pg 16
Pg 16Pg 16
Pg 16Pg 16
Pg 21Pg 21
Pg 21Pg 21
Pg 21Pg 21
Pg 29
1111
1414
1919
2424
2424
2828
2828
3838
42
2323
3030
4040
5050
5050
6060
6060
8080
110
44
55
66
88
88
88
88
1010
12
99
1111
15.515.5
2020
2020
2424
2424
3333
37
12.512.5
1616
21.521.5
2727
2727
3131
3131
4141
45
M5 x 10M5 x 10
M5 x 10M5 x 10
M6 x 16M6 x 16
M8 x 19M8 x 19
M8 x 19M8 x 19
M10 x 22M10 x 22
M10 x 22M10 x 22
M12 x 28M12 x 28
M16 x 36
CableGland
Holeø
a51SHAFT EXTENSIONS
D E F G GA XIM
Form IEC M N P LA T S AC h11 h12 L
FLANGE DIMENSIONS MAIN DIMENSIONS
α
* ISO tolerances: 14 i 6 (+0,008); 19, 24, 28 j 6 (+0.009); 38, 42 k 6 (+0.018)–0.003 +0.002–0.004
BF7 63 UP TO 160 MOTORS
B5 B14
Ametric® Page 11 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 89
BF5 180M (1)BF5 180M (2)BF5 180L (2)BF5 200L (1)BF5 200L (2)BF5 225S (2)BF5 225M (1)BF5 225M (2)
BF5 180M (1)BF5 180M e L (2)BF5 200L (1)BF5 200L (2)BF5 225S e M (2)BF5 225M (1)
TOTALLY ENCLOSED FAN-COOLED THREE-PHASE MOTORS
Ametric® Page 12 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
90 American Metric® Corporation
BF4 250M (1)BF4 250M (2)BF4 280SA (1)BF4 280SA (2)BF4 280MA (1)BF4 280MA (2)BF4 315SA (1)BF4 315SA (2)BF4 315MA (1)BF4 315MA (2)
(1) 2 poles(2) 4 poles and more
(1) 2 poles(2) 4 poles and more
BF4 250M (1)BF4 250M (2)BF4 280SA (1)BF4 280SA (2)BF4 280MA (1)BF4 280MA (2)BF4 315SA (1)BF4 315SA (2)BF4 315MA (1)BF4 315MA (2)
TOTALLY ENCLOSED FAN-COOLED THREE-PHASE MOTORS
Ametric® Page 13 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 91
BF3 315MA (1)BF3 315M (2) (3)BF3 355MA (1)BF3 280SA (2)BF3 400LA (1)BF3 400LA (2)
(1) 2 poles: direct coupling(2) 4 poles and more: direct coupling(2) 4 poles and more: belt drive
BF3 315MA (1)BF3 315MA (2) (3)BF3 355MA (1)BF3 355MA (2)BF3 400LA (1)BF3 400LA (2)
TOTALLY ENCLOSED FAN-COOLED THREE-PHASE MOTORS
Ametric® Page 14 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
92 American Metric® Corporation
1500RPM 4 Pole220-240V or 380-415V
50Hz* 3000RPM 2 Pole220-240V or 380-415V
3600RPM 2 Pole250-280 or 440-480V
60Hz*
50Hz*
1800RPM 4 Pole250-280 or 440-480V
60Hz*
BFF5 71M42BFF5 71M42BFF5 71M42BFF5 71M42
BFF5 80M42BFF5 80M42BFF5 80M42BFF5 80M42
BFF5 90S22BFF5 90L42BFF5 90S22BFF5 90L42
BFF5 100L42BFF5 100L42
BFF5 112M22BFF5 112M22
BFF5 132S42BFF5 132S62BFF5 132S42BFF5 132S62
BFF5 160M22BFF5 160M42BFF5 160L62BFF5 160M22BFF5 160M42BFF5 160L62
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
0.370.550.370.55
0.751.1
0.751.1
1.52.21.52.2
33
44
5.57.55.57.5
1115
18.51115
18.5
0.500.740.500.74
1.011.471.011.47
2.012.952.012.95
4.024.02
5.365.36
7.3710.057.37
10.05
14.7520.1124.8014.7520.1124.80
BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44BFF5 71M44
BFF5 80M44BFF5 80M44BFF5 80M44BFF5 80M44
BFF5 90S24BFF5 90L44BFF5 90S24BFF5 90L44
BFF5 100L24BFF5 100L44BFF5 100L24BFF5 100L44
BFF5 112M44BFF5 112M44
BFF5 132S44BFF5 132M84BFF5 132S44BFF5 132M84
BFF5 160M44BFF5 160L64BFF5 160M44BFF5 160L64
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.180.250.370.180.250.37
0.550.750.550.75
1.11.51.11.5
2.23
2.23
44
5.57.55.57.5
11151115
0.240.340.500.240.340.50
0.741.010.741.01
1.472.011.472.01
2.954.022.954.02
5.365.36
7.3710.057.37
10.05
14.7520.1114.7520.11
DISC BRAKE MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber HPkW
TypeMount
PartNumber HPkW
TypeMount
Ametric® Page 15 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 93
DISC BRAKE MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber HPkW
TypeMount
PartNumber HPkW
TypeMount
50Hz* 1000RPM 6 Pole220-240V or 380-415V
1200RPM 6 Pole250-280 or 440-480V
60Hz*
50Hz* 750RPM 8 Pole220-240V or 380-415V
900RPM 8 Pole250-280 or 440-480V
60Hz*
BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46BFF5 71M46
BFF5 80M46BFF5 80M66BFF5 80M46BFF5 80M66
BFF5 90S26BFF5 90L66BFF5 90S26BFF5 90L66
BFF5 100L46BFF5 100L46
BFF5 112M46BFF5 112M46
BFF5 132S86BFF5 132M86BFF5 132M86BFF5 132S86BFF5 132M86BFF5 132M86
BFF5 160M66BFF5 160L66BFF5 160M66BFF5 160L66
BFF5 71M48BFF5 71M48BFF5 71M48BFF5 71M48
BFF5 80M48BFF5 80M68BFF5 80M48BFF5 80M68
BFF5 90S28BFF5 90L68BFF5 90S28BFF5 90L68
BFF5 100L48BFF5 100L48BFF5 100L48BFF5 100L48
BFF5 112M48BFF5 112M48
BFF5 132S88BFF5 132M88BFF5 132S88BFF5 132M88
BFF5 160M68BFF5 160M68BFF5 160L68BFF5 160M68BFF5 160M68BFF5 160L68
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
0.120.1850.250.12
0.1850.25
0.370.550.370.55
0.751.1
0.751.1
1.51.5
2.22.2
34
5.534
5.5
7.5117.511
0.090.120.090.12
0.1850.25
0.1850.25
0.370.550.370.55
0.751.10.751.1
1.51.5
2.23
2.23
45.57.54
5.57.5
0.160.250.340.160.250.34
0.500.740.500.74
1.011.471.011.47
2.012.01
2.952.95
4.025.367.374.025.367.37
10.0514.7510.0514.75
0.120.160.120.16
0.250.340.250.34
0.500.740.500.74
1.011.471.011.47
2.012.01
2.954.022.954.02
5.367.37
10.055.367.37
10.05
Ametric® Page 16 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
94 American Metric® Corporation
DISC BRAKE MOTOR
FOOT-MOUNTED MOTORSIM1001; 1051; 1061; 1071; 1011; 1031
Dimensions (mm)
Bore Air-GapA AA AB AC B BB C H HA HD h11 K L D E F G GA XShaft End a51Type
BFF5 71MBFF5 80MBFF5 90SBFF5 90LBFF5 100L
112125140140160
2527.5303035
132150171171195
140157180180204
90100100125140
110120127152175
4550565663
71809090100
89.5101012
177192.5210210
235.5
6368.578.578.590.5
710101012
271304330355403
1419242428
3040505060
56888
1115.5202024
1621.5272731
M4x10M6x16M8x19M8x19
M10x22
22.522.522.522.528.5
0.20.20.20.20.2
FLANGE-MOUNTED MOTORSDimensions (mm)
Bore Air-GapIM IEC M N P LA T S AC h11 h12 L D E F G GA XShaft End a51Type
BFF5 71M
BFF5 80M
BFF5 90S
BFF5 90L
BFF5 100L
30363036303630363036
F130F85F165F100F165F115F165F115F215F130
13085165100165115165115215130
11070130801309513095180110
160105200120200140200140250160
8--8--10--10--12--
3.52.53.53
3.53
3.534
3.5
45o
45o
45o
45o
45o
45o
45o
45o
45o
45o
10M612M612M812M814.5M8
140140157157180180180180204204
6363
68.568.578.578.578.578.590.590.5
106106
112.5112.5120120120120
135.5135.5
271271304304330330355355403403
14141919242424242828
30304040505050506060
5566888888
1111
15.515.5202020202424
1616
21.521.5272727273131
M14x0M4x10M6x16M6x16M8x19M8x19M8x19Mx19
M10x22M10x22
22.522.522.522.522.522.522.522.528.528.5
0.20.20.20.20.20.20.20.20.20.2
FREE HOLESIM 3001; 2011; 3031
THREADED HOLESIM 3601; 3611; 3631
Ametric® Page 17 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 95
DISC BRAKE MOTOR
FOOT-MOUNTED MOTORSIM1001; 1051; 1061; 1071; 1011; 1031
Dimensions (mm)
Bore Air-GapA AA AB AC B BB C H HA HD h11 K L D E F G GA XShaft End a51Type
BFF5 112MBFF5 132SBFF5 132MBFF5 160MBFF5 160L
190216216254254
4052526060
220260260300300
218254254303303
140140178210254
175218218300300
708989108108
112132132160160
1216161818
257.5295295356356
88103103120120
1212121515
493569569711711
2838384242
608080110110
810101212
2433333737
3141414545
M10x22M12x28M12x28M16x36M16x36
2x28.52x28.52x28.52x372x37
0.40.50.50.50.5
FLANGE-MOUNTED MOTORSDimensions (mm)
Bore Air-GapIM IEC M N P LA T S AC h11 h12 L D E F G GA X
Shaft End a51Type
BFF5 112M
BFF5 132S/M
BFF5 160M/L
3036303630
F215F130F265F165F300
215130265165300
180110230130250
250160300195350
12--12--13
43.54
3.55
45o
45o
45o
45o
45o
14.5M814.5M1018.5
218218254254303
8888103103120
145.5145.5163163196
493493569569711
2828383842
60608080110
88
101012
2424333337
3131414145
M10x22M10x22M12x28M12x28M16x36
2x28.52x28.52x28.52x28.52x37
0.20.20.20.20.2
FREE HOLESIM 3001; 2011; 3031
THREADED HOLESIM 3601; 3611; 3631
Ametric® Page 18 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
96 American Metric® Corporation
60Hz* 3600RPM 2 Pole250-280 or 440-480V
50Hz* 3000RPM 2 Pole220-240V or 380-415V
footfootfootfootfoot
foot
foot
footfoot
footfootfoot
foot
footfoot
foot
foot
footfoot
footfoot
footfoot
footfootfootfoot
footfootfoot
0.550.751.101.502.20
3.00
4.00
5.507.50
11.0015.0018.50
22.00
30.0037.00
45.00
55.00
75.0090.00
110.00132.00
160.00200.00
220.00260.00290.00330.00
370.00400.00440.00
0.741.011.472.012.95
4.02
5.36
7.3710.05
14.7520.1124.80
29.49
40.2149.60
60.32
73.73
100.54120.64
147.45176.94
214.48268.10
294.91348.53388.74442.36
495.98536.19589.81
3030303040
50
65
8590
120135160
205
275290
350
450
575620
810890
11501250
1550180018751950
265028002900
BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 L52
BFGC3 100 L22A
BFGC3 112 M22
BFGC3 132 S22BFGC3 132 S42
BFGC3 160 M22BFGC3 160 M42BFGC3 160 L62
BFGC3 180 M42
BFGC3 200 L22BFGC3 200 L42
BFGC4 225 M42
BFGC4 250 M42
BFGC4 280 SA42BFGC4 280 MA62
BFGC4 315 SA42BFGC4 315 MA62
BFGC3 315 MA62BFGC3 315 MA82
BFGC3 355 MA22BFGC3 355 MA42BFGC3 355 MA62BFGC3 355 MA82
BFGC3 400 LA42BFGC3 400 LA62BFGC3 400 LA82
flangeflangeflangeflangeflange
flange
flange
flangeflange
flangeflangeflange
flange
flangeflange
flange
flange
flangeflange
flangeflange
flangeflange
flangeflangeflangeflange
flangeflangeflange
0.550.751.101.502.20
3.00
4.00
5.507.50
11.0015.0018.50
22.00
30.0037.00
45.00
55.00
75.0090.00
110.00132.00
160.00200.00
220.00260.00290.00330.00
370.00400.00440.00
0.741.011.472.012.95
4.02
5.36
7.3710.05
14.7520.1124.80
29.49
40.2149.60
60.32
73.73
100.54120.64
147.45176.94
214.48268.10
294.91348.53388.74442.36
495.98536.19589.81
3030303040
50
65
8590
120135160
205
275290
350
450
575620
810890
11501250
1550180018751950
265028002900
BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 S32BFGC3 90 L52
BFGC3 100 L22A
BFGC3 112 M22
BFGC3 132 S22BFGC3 132 S42
BFGC3 160 M22BFGC3 160 M42BFGC3 160 L62
BFGC3 180 M42
BFGC3 200 L22BFGC3 200 L42
BFGC4 225 M42
BFGC4 250 M42
BFGC4 280 SA42BFGC4 280 MA62
BFGC4 315 SA42BFGC4 315 MA62
BFGC3 315 MA62BFGC3 315 MA82
BFGC3 355 MA22BFGC3 355 MA42BFGC3 355 MA62BFGC3 355 MA82
BFGC3 400 LA42BFGC3 400 LA62BFGC3 400 LA82
EXPLOSION PROOF MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
Flame-Proof StandardsAll Ametric® BFGC Motors satisfy EN 50014, 50018 European standards for the IIC group of gases in the T4 temperature range. They arefitted with EEx d IIC flameproof terminal boxes.
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 19 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 97
EXPLOSION PROOF MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
Flame-Proof StandardsAll Ametric® BFGC Motors satisfy EN 50014, 50018 European standards for the IIC group of gases in the T4 temperature range. They arefitted with EEx d IIC flameproof terminal boxes.
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
60Hz* 1800RPM 4 Pole250-280 or 440-480V
50Hz* 1500RPM 4 Pole220-240V or 380-415V
BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 L44A
BFGC3 100 L34ABFGC3 100 L54A
BFGC3 112 M44
BFGC3 132 S44BFGC3 132 M44
BFGC3 160 M44BFGC3 160 L64
BFGC3 180 M44BFGC3 180 L64
BFGC3 200 L44
BFGC3 225 S24BFGC3 225 M44
BFGC4 250 M44
BFGC4 280 SA44BFGC4 280 MA84
BFGC4 315 SA44BFGC4 315 MA64
BFGC3 315 MA64BFGC3 315 MA84
BFGC3 355 MA24BFGC3 355 MA44BFGC3 355 MA64BFGC3 355 MA84
BFGC3 400 LA24BFGC3 400 LA44BFGC3 400 LA64BFGC3 400 LA84
footfootfootfootfoot
footfoot
foot
footfoot
footfoot
footfoot
foot
footfoot
foot
footfoot
footfoot
footfoot
footfootfootfoot
footfootfootfoot
0.370.550.751.101.50
2.203.00
4.00
5.507.50
11.0015.00
18.5022.00
30.00
37.0045.00
55.00
75.0090.00
110.00132.00
160.00200.00
220.00260.00290.00315.00
330.00370.00400.00440.00
3030303035
4550
60
8585
140160
210230
290
315340
465
600650
815895
12501350
1950207522002250
2770250030253200
0.500.741.011.472.01
2.954.02
5.36
7.3710.05
14.7520.11
24.8029.49
40.21
49.6060.32
73.73
100.54120.64
147.45176.94
214.48268.10
294.91348.53388.74422.25
442.36495.98536.19589.81
BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 S34BFGC3 90 L44A
BFGC3 100 L34ABFGC3 100 L54A
BFGC3 112 M44
BFGC3 132 S44BFGC3 132 M44
BFGC3 160 M44BFGC3 160 L64
BFGC3 180 M44BFGC3 180 L64
BFGC3 200 L44
BFGC3 225 S24BFGC3 225 M44
BFGC4 250 M44
BFGC4 280 SA44BFGC4 280 MA84
BFGC4 315 SA44BFGC4 315 MA64
BFGC3 315 MA64BFGC3 315 MA84
BFGC3 355 MA24BFGC3 355 MA44BFGC3 355 MA64BFGC3 355 MA84
BFGC3 400 LA24BFGC3 400 LA44BFGC3 400 LA64BFGC3 400 LA84
flangeflangeflangeflangeflange
flangeflange
flange
flangeflange
flangeflange
flangeflange
flange
flangeflange
flange
flangeflange
flangeflange
flangeflange
flangeflangeflangeflange
flangeflangeflangeflange
0.370.550.751.101.50
2.203.00
4.00
5.507.50
11.0015.00
18.5022.00
30.00
37.0045.00
55.00
75.0090.00
110.00132.00
160.00200.00
220.00260.00290.00315.00
330.00370.00400.00440.00
3030303035
4550
60
8585
140160
210230
290
315340
465
600650
815895
12501350
1950207522002250
2770250030253200
0.500.741.011.472.01
2.954.02
5.36
7.3710.05
14.7520.11
24.8029.49
40.21
49.6060.32
73.73
100.54120.64
147.45176.94
214.48268.10
294.91348.53388.74422.25
442.36495.98536.19589.81
Ametric® Page 20 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
98 American Metric® Corporation
EXPLOSION PROOF MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
Flame-Proof StandardsAll Ametric® BFGC Motors satisfy EN 50014, 50018 European standards for the IIC group of gases in the T4 temperature range. They arefitted with EEx d IIC flameproof terminal boxes.
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
60Hz* 1200RPM 6 Pole250-280 or 440-480V
50Hz* 1000RPM 6 Pole220-240V or 380-415V
BFGC3 90 S36ABFGC3 90 S36ABFGC3 90 S36ABFGC3 90 L66
BFGC3 100 L16A
BFGC3 112 M46
BFGC3 132 S26BFGC3 132 M46BFGC3 132 M86
BFGC3 160 M40BFGC3 160 L86
BFGC3 180 L46
BFGC3 200 L26BFGC3 200 L46
BFGC4 225 M46
BFGC4 250 M26
BFGC4 280 SA26BFGC4 280 MA46
BFGC4 315 SA46BFGC4 315 MA66
BFGC3 315 MA66BFGC3 315 MA86BFGC3 315 MA106
BFGC3 355 MA66BFGC3 355 MA86
BFGC3 400 LA66BFGC3 400 LA86
30303045
50
60
8090110
140165
200
260310
390
450
610650
740836
112512251350
20252150
30253175
0.370.550.751.10
1.50
2.20
3.004.005.50
7.5011.00
15.00
18.5022.00
30.00
37.00
45.0055.00
75.0090.00
110.00132.00160.00
200.00250.00
290.00330.00
0.500.741.011.47
2.01
2.95
4.025.367.37
10.0514.75
20.11
24.8029.49
40.21
49.60
60.3273.73
100.54120.64
147.45176.94214.48
268.10335.12
388.74442.36
footfootfootfoot
foot
foot
footfootfoot
footfoot
foot
footfoot
foot
foot
footfoot
footfoot
footfootfoot
footfoot
footfoot
BFGC3 90 S36ABFGC3 90 S36ABFGC3 90 S36ABFGC3 90 L66
BFGC3 100 L16A
BFGC3 112 M46
BFGC3 132 S26BFGC3 132 M46BFGC3 132 M86
BFGC3 160 M40BFGC3 160 L86
BFGC3 180 L46
BFGC3 200 L26BFGC3 200 L46
BFGC4 225 M46
BFGC4 250 M26
BFGC4 280 SA26BFGC4 280 MA46
BFGC4 315 SA46BFGC4 315 MA66
BFGC3 315 MA66BFGC3 315 MA86BFGC3 315 MA106
BFGC3 355 MA66BFGC3 355 MA86
BFGC3 400 LA66BFGC3 400 LA86
30303045
50
60
8090110
140165
200
260310
390
450
610650
740836
112512251350
20252150
30253175
0.370.550.751.10
1.50
2.20
3.004.005.50
7.5011.00
15.00
18.5022.00
30.00
37.00
45.0055.00
75.0090.00
110.00132.00160.00
200.00250.00
290.00330.00
0.500.741.011.47
2.01
2.95
4.025.367.37
10.0514.75
20.11
24.8029.49
40.21
49.60
60.3273.73
100.54120.64
147.45176.94214.48
268.10335.12
388.74442.36
flangeflangeflangeflange
flange
flange
flangeflangeflange
flangeflange
flange
flangeflange
flange
flange
flangeflange
flangeflange
flangeflangeflange
flangeflange
flangeflange
Ametric® Page 21 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 99
EXPLOSION PROOF MOTOR METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
Flame-Proof StandardsAll Ametric® BFGC Motors satisfy EN 50014, 50018 European standards for the IIC group of gases in the T4 temperature range. They arefitted with EEx d IIC flameproof terminal boxes.
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
BFGC3 90 S48BFGC3 90 L68
BFGC3 100 L38ABFGC3 100 L58A
BFGC3 112 M48
BFGC3 132 S28BFGC3 132 M42
BFGC3 160 M28BFGC3 160 M48BFGC3 160 L68
BFGC3 180 L48
BFGC3 200 L28
BFGC3 225 S28BFGC3 225 M48
BFGC4 250 M48
BFGC4 280 SA48BFGC4 280 MA68
BFGC4 315 SA48BFGC4 315 MA68
BFGC3 315 MA68BFGC3 315 MA88BFGC3 315 MA108
BFGC3 355 MA48BFGC3 355 MA68BFGC3 355 MA88
BFGC3 400 LA68BFGC3 400 LA88
0.370.55
0.751.10
1.50
2.203.00
4.005.507.50
11.00
15.00
18.5022.00
30.00
37.0045.00
55.0075.00
100.00110.00132.00
150.00185.00220.00
260.00290.00
0.500.74
1.011.47
2.01
2.954.02
5.367.37
10.05
14.75
20.11
24.8029.49
40.21
49.6060.32
73.73100.54
134.05147.45176.94
201.07247.99294.91
348.53388.74
4045
5055
60
8092
135140165
200
260
350400
450
610630
740830
117512501300
200022002400
30003200
60Hz* 900RPM 8 Pole250-280 or 440-480V
50Hz* 750RPM 8 Pole220-240V or 380-415V
footfoot
footfoot
foot
footfoot
footfootfoot
foot
foot
footfoot
foot
footfoot
footfoot
footfootfoot
footfootfoot
footfoot
BFGC3 90 S48BFGC3 90 L68
BFGC3 100 L38ABFGC3 100 L58A
BFGC3 112 M48
BFGC3 132 S28BFGC3 132 M42
BFGC3 160 M28BFGC3 160 M48BFGC3 160 L68
BFGC3 180 L48
BFGC3 200 L28
BFGC3 225 S28BFGC3 225 M48
BFGC4 250 M48
BFGC4 280 SA48BFGC4 280 MA68
BFGC4 315 SA48BFGC4 315 MA68
BFGC3 315 MA68BFGC3 315 MA88BFGC3 315 MA108
BFGC3 355 MA48BFGC3 355 MA68BFGC3 355 MA88
BFGC3 400 LA68BFGC3 400 LA88
0.370.55
0.751.10
1.50
2.203.00
4.005.507.50
11.00
15.00
18.5022.00
30.00
37.0045.00
55.0075.00
100.00110.00132.00
150.00185.00220.00
260.00290.00
0.500.74
1.011.47
2.01
2.954.02
5.367.37
10.05
14.75
20.11
24.8029.49
40.21
49.6060.32
73.73100.54
134.05147.45176.94
201.07247.99294.91
348.53388.74
4045
5055
60
8092
135140165
200
260
350400
450
610630
740830
117512501300
200022002400
30003200
flangeflange
flangeflange
flange
flangeflange
flangeflangeflange
flange
flange
flangeflange
flange
flangeflange
flangeflange
flangeflangeflange
flangeflangeflange
flangeflange
Ametric® Page 22 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
100 American Metric® Corporation
FOOT-MOUNTED MOTORS - IM 1001 Layout
FLAME-PROOF TYPE THREE-PHASE MOTORS
SHORT-CIRCUIT ROTORLOW VOLTAGEBFGC3 90 to 225 and BFGC4 250 to 315A Motors
Ametric® Page 23 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 101
FLAME-PROOF TYPE (BFGC3 315A to 400A Motors)
FOOT-MOUNTED MOTORS - IM 1001 Layout
FLANGE-MOUNTED MOTORS - IM 3001 Layout
Ametric® Page 24 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
102 American Metric® Corporation
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.37/0.250.45/0.30.37/0.250.45/0.3
0.6/0.450.85/0.650.6/0.450.85/0.65
1.3/12/1.61.3/12/1.6
2.7/2.23.4/2.72.7/2.23.4/2.7
4.5/3.34.5/3.3
5.7/4.67.6/6.35.7/4.67.6/6.3
12.5/8.515/11
12.5/8.515/11
0.5/0.340.6/0.40.5/0.340.6/0.4
0.8/0.61.1/0.90.8/0.61.1/0.9
1.7/1.42.7/2.11.7/1.42.7/2.1
3.6/34.5/3.63.6/3
4.5/3.6
6/4.56/4.5
7.6/6.110.1/8.47.6/6.110.1/8.4
17/11.520/15
17/11.520/15
50Hz* 3000/1500 RPM 2/4 Pole220-240V or 380-415V
3600/1800 RPM 2/4 Pole250-280 or 440-480V
60Hz*
BF5 180M424BF5 180L624BF5 180M424BF5 180L624
BF5 200L824BF5 200L824
BF5 225M424BF5 225M424
BF4 250M424BF4 250M424
BF4 280SA424BF4 280MA624BF4 280SA424BF4 280MA624
BF4 315SA424BF4 315MA624BF4 315SA424BF4 315MA624
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
18.5/12.522/15
18.5/12.522/15
30/2030/20
33/2233/22
45/3045/30
55/3775/4555/3775/45
92/55110/6692/55110/66
25/1730/2025/1730/20
40/2740/27
45/3045/30
60/4060/40
75/50100/6075/50100/60
125/75150/90125/75150/90
BF5 71M424BF5 71M424BF5 71M424BF5 71M424
BF5 80M424BF5 80M624BF5 80M424BF5 80M624
BF5 90S224BF5 90L624BF5 90S224BF5 90L624
BF5 100L224BF5 100L424BF5 100L224BF5 100L424
BF5 112M424BF5 112M424
BF5 132S424BF5 132M824BF5 132S424BF5 132M824
BF5 160M424BF5 160L624BF5 160M424BF5 160L624
5.85.85.85.8
7.69
7.69
11.513.411.513.4
1820.518
20.5
2525
35453545
69816981
113125113125
175175
210210
445445
525580525580
734814734814
TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARDSTANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 25 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 103
TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
BF5 71M448BF5 71M448
BF5 80M448BF5 80M448BF5 80M448BF5 80M448
BF5 90S248BF5 90L248BF5 90S248BF5 90L248
BF5 100L248BF5 100L448BF5 100L248BF5 100L448
BF5 112M448BF5 112M448BF5 112M448BF5 112M448
BF5 132M848BF5 132M848BF5 132M848BF5 132M848BF5 132M848BF5 132M848
BF5 160M648BF5 160L648BF5 160M648BF5 160L648
BF5 180M448BF5 180M448
BF5 200L448BF5 200L448
BF5 225S248BF5 225M448BF5 225S248BF5 225M448
BF4 250M448BF4 250M448
BF4 280SA448BF4 280MA648BF4 280MA848BF4 280SA448BF4 280SA648BF4 280MA848
BF4 315SA648BF4 315MA648BF4 315MA848BF4 315SA648BF4 315MA648BF4 315MA848
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
15/9.515/9.5
20/1120/11
24/1830/2224/1830/22
37/2637/26
45/3055/3766/4545/3055/3766/45
81/5593/66110/8181/5593/66110/81
0.3/0.160.3/0.16
0.5/0.260.8/0.370.5/0.260.8/0.37
0.9/0.51.5/1
0.9/0.51.5/1
2/13/1.42/1
3/1.4
3.6/24.5/2.33.6/2
4.5/2.3
5.5/2.76.9/3.77.6/4.55.5/2.76.9/3.77.6/4.5
11/616/9.511/6
16/9.5
20/1320/13
27/1527/15
33/2440/3033/2440/30
50/3550/35
60/4075/5090/6060/4075/5090/60
110/75126/90150/110110/75126/90150/110
50Hz* 1500/750 RPM 4/8 Pole220-240V or 380-415V
1800/900 RPM 4/8 Pole250-280 or 440-480V
60Hz*
0.22/0.120.22/0.12
0.4/0.20.6/0.280.4/0.20.6/0.28
0.7/0.371.1/0.750.7/0.371.1/0.75
1.5/0.752.2/1
1.5/0.752.2/1
2.7/1.53.3/1.72.7/1.53.3/1.7
4/25.2/2.85.7/3.4
4/25.2/2.85.7/3.4
8/4.512/78/4.512/7
5.85.8
9999
11.515
11.515
1820.518
20.5
25252525
474747474747
68816881
115115
140140
170180170180
445445
480555594480555594
705780820705780820
Ametric® Page 26 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
104 American Metric® Corporation
TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
50Hz* 1500/1000 RPM 4/6 Pole220-240V or 380-415V
1800/1200 RPM 4/6 Pole250-280 or 440-480V
60Hz*
BF5 71M446BF5 71M446
BF5 80M646BF5 80M646BF5 80M646BF5 80M646
BF5 90S446BF5 90L646BF5 90S446BF5 90L646
BF5 100L246BF5 100L446BF5 100L246BF5 100L446
BF5 112M446BF5 112M446BF5 112M446BF5 112M446
BF5 132M846BF5 132M846BF5 132M846BF5 132M846
BF5 160M446BF5 160L646BF5 160M446BF5 160L646
BF5 180M446BF5 180L646BF5 180M446BF5 180L646
BF5 200L446BF5 200L646BF5 200L446BF5 200L646
BF5 225M446BF5 225M446
BF4 250M446BF4 250M446
BF4 280SA446BF4 280MA446BF4 280MA846BF4 280SA446BF4 280MA446BF4 280MA846
BF4 315SA446BF4 315MA646BF4 315SA446BF4 315MA646
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.25/0.150.25/0.15
0.35/0.30.5/0.370.35/0.30.5/0.37
0.8/0.451.2/0.650.8/0.451.2/0.65
1.5/0.91.8/1.11.5/0.91.8/1.1
2.4/1.852.8/2.052.4/1.852.8/2.05
3.9/2.655.4/3.53.9/2.655.4/3.5
7.5/5.511.5/8.57.5/5.511.5/8.5
13/815/1013/815/10
17/1223/1517/1223/15
30/2030/20
37/2237/22
45/2655/3066/4445/2655/3066/44
81/5595/6681/5595/66
0.34/0.20.34/0.2
0.5/0.40.7/0.50.5/0.40.7/0.5
1.1/0.61.6/0.91.1/0.61.6/0.9
2/1.22.5/1.52/1.2
2.5/1.5
3.2/2.53.7/2.73.2/2.53.7/2.7
5.2/3.57.2/4.65.2/3.57.2/4.6
10/7.515.3/11.5
10/7.515.3/11.5
18/1120/1418/1120/14
23/1631/2023/1631/20
40/2740/27
50/3050/30
60/3575/4090/6060/3575/4090/60
110/75130/90110/75130/90
5.85.8
9999
11.515
11.515
1820.518
20.5
23232323
47474747
69816981
113125113125
149149149149
200200
437437
480500594480500594
750820750820
Ametric® Page 27 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 105
50Hz* 1000/750 RPM 6/8 Pole220-240V or 380-415V
1200/900 RPM 6/8 Pole250-280 or 440-480V
60Hz*
BF5 71M468BF5 71M468
BF5 80M668BF5 80M668
BF5 90L668BF5 90L668
BF5 100L268BF5 100L468BF5 100L268BF5 100L468
BF5 112M468BF5 112M468BF5 112M468BF5 112M468
BF5 132S868BF5 132M868BF5 132S868BF5 132M868
BF5 160M468BF5 160L468BF5 160L668BF5 160M468BF5 160L468BF5 160L668
BF5 180L868BF5 180L868
BF5 200L668BF5 200L868BF5 200L668BF5 200L868
BF5 225M468BF5 225M468
BF4 250M468BF4 250M468
BF4 280M668BF4 280M868BF4 280M668BF4 280M868
BF4 315MA668BF4 315MA668
FOOTFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
0.12/0.050.12/0.05
0.25/0.120.25/0.12
0.37/0.250.37/0.25
0.55/0.370.75/0.550.55/0.370.75/0.55
1.1/0.751.5/0.881.1/0.751.5/0.88
2.65/1.953/2.2
2.65/1.953/2.2
4/36.2/4.48.4/5.7
4/36.2/4.48.4/5.7
13/9.513/9.5
16/1222/1616/1222/16
25/18.525/18.5
30/2230/22
42/3155/4542/3155/45
70/5570/55
0.16/0.070.16/0.07
0.34/0.160.34/0.16
0.5/0.340.5/0.34
0.75/0.51/0.75
0.75/0.51/0.75
1.5/12/1.21.5/12/1.2
3.5/2.64/3
3.5/2.64/3
5.5/48.3/611/7.65.5/48.3/611/7.6
18/1318/13
21/1630/2121/1630/21
34/2534/25
40/3040/30
56/4175/6056/4175/60
93/7593/75
5.85.8
99
1515
1820.518
20.5
25252525
35473547
69
8169
81
115115
125140125140
210210
405405
475490475490
790790
TWO SPEED MOTOR (FOR GENERAL APPLICATION) METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 28 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
106 American Metric® Corporation
TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.55/0.110.55/0.11
0.9/0.181.2/0.250.9/0.181.2/0.25
1.6/0.352.2/0.451.6/0.352.2/0.45
3.5/0.73.5/0.7
4.5/1.15.5/1.354.5/1.15.5/1.35
6.9/1.78.3/2.19/2.5
6.9/1.78.3/2.19/2.5
15/318/415/318/4
50Hz* 3000/1500 RPM 2/4 Pole220-240V or 380-415V
3600/1800 RPM 2/4 Pole250-280 or 440-480V
60Hz*
BF5 180M424BF5 180L424BF5 180M424BF5 180L424
BF5 200L624BF5 200L824BF5 200L624BF5 200L824
BF5 225M424BF5 225M424
BF4 250M424BF4 250M424
BF4 280SA424BF4 280MA624BF4 280SA424BF4 280MA624
BF4 315SA424BF4 315MA624BF4 315SA424BF4 315MA624
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
20/424/4.820/4
24/4.8
27/5.532/6.527/5.532/6.5
37/737/7
45/8.845/8.8
55/1175/1555/1175/15
90/18.5110/2290/18.5110/22
27/5.533/6.527/5.533/6.5
37/7.543/8.837/7.543/8.8
50/9.550/9.5
60/1260/12
75/15100/2075/15100/20
122/25150/30122/25150/30
BF5 71M424BF5 71M424
BF5 80M424BF5 80M624BF5 80M424BF5 80M624
BF5 90S224BF5 90L424BF5 90S224BF5 90L424
BF5 100L424BF5 100L424
BF5 112M224BF5 112M424BF5 112M224BF5 112M424
BF5 132S624BF5 132S624BF5 132M824BF5 132S624BF5 132S624BF5 132M824
BF5 160M424BF5 160L624BF5 160M424BF5 160L624
5.85.8
9999
12141214
20.520.5
23
23
4242
4242
70827082
120
120
175
175
220220
445445
525580525580
734814734814
0.75/0.150.75/0.15
1.2/0.251.6/0.341.2/0.251.6/0.34
2.1/0.53/0.6
2.1/0.53/0.6
4.6/0.94.6/0.9
6/1.57.5/1.86/1.5
7.5/1.8
9.2/2.311/2.812/3.49.2/2.311/2.812/3.4
20/424/5.520/4
24/5.5
Ametric® Page 29 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 107
TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARDSTANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
BF5 71M448BF5 71M448
BF5 80M448BF5 80M648BF5 80M448BF5 80M648
BF5 90S448BF5 90L648BF5 90S448BF5 90L648
BF5 100L248BF5 100L448BF5 100L248BF5 100L448
BF5 112M448BF5 112M448
BF5 132S848BF5 132M848BF5 132M848BF5 132S848BF5 132M848BF5 132M848
BF5 160M448BF5 160L648BF5 160M448BF5 160L648
BF5 180M448BF5 180L648BF5 180M448BF5 180L648
BF5 200L448BF5 200L448
BF5 225S248BF5 225M448BF5 225S248BF5 225M448
BF4 250M448BF4 250M448
BF4 280SA448BF4 280MA648BF4 280MA848BF4 280SA448BF4 280SA648BF4 280MA848
BF4 315SA448BF4 315MA648BF4 315MA848BF4 315SA448BF4 315MA648BF4 315MA848
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
17/3.420/4
17/3.420/4
26/526/5
36/742/8.536/7
42/8.5
40/8.840/8.8
47/1158/15
68/18.547/1158/15
68/18.5
85/2297/25115/3085/2297/25115/30
0.5/0.130.5/0.13
0.9/0.171.1/0.250.9/0.171.1/0.25
1.6/0.372.3/0.51.6/0.372.3/0.5
3/0.73.7/0.83/0.7
3.7/0.8
5/1.25/1.2
6.9/1.88.4/2.311/2.76.9/1.88.4/2.311/2.7
14/320/3.614/3
20/3.6
23/4.527/5.523/4.527/5.5
35/6.835/6.8
48/9.556/11.548/9.556/11.5
55/1255/12
64/1579/2092/2564/1579/2092/25
116/30132/34156/40116/30132/34156/40
50Hz* 1500/750 RPM 4/8 Pole220-240V or 380-415V
1800/900 RPM 4/8 Pole250-280 or 440-480V
60Hz*
0.4/0.10.4/0.1
0.65/0.130.85/0.180.65/0.130.85/0.18
1.2/0.281.7/0.351.2/0.281.7/0.35
2.3/0.52.8/0.62.3/0.52.8/0.6
3.7/0.923.7/0.92
5.2/1.356.3/1.78.4/2.055.2/1.356.3/1.78.4/2.05
10.5/2.215.5/2.710.5/2.215.5/2.7
5.85.8
9
9
15
15
18211821
2525
4545
4545
69816981
113125113125
200210200210
440440
480545595480545595
680775820680775820
Ametric® Page 30 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
108 American Metric® Corporation
TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARDSTANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
50Hz* 1500/1000 RPM 4/6 Pole220-240V or 380-415V
1800/1200 RPM 4/6 Pole250-280 or 440-480V
60Hz*
BF5 71M446BF5 71M446
BF5 80M646BF5 80M646BF5 80M646BF5 80M646
BF5 90S446BF5 90L646BF5 90S446BF5 90L646
BF5 100L246BF5 100L446BF5 100L246BF5 100L446
BF5 112M446BF5 112M446
BF5 132S846BF5 132M846BF5 132M846BF5 132S846BF5 132M846BF5 132M846
BF5 160M646BF5 160L646BF5 160M646BF5 160L646
BF5 180M446BF5 180L446BF5 180M446BF5 180L446
BF5 200L446BF5 200L646BF5 200L446BF5 200L646
BF5 225M246BF5 225M246
BF4 250M446BF4 250M446
BF4 280SA446BF4 280MA846BF4 280SA446BF4 280MA846
BF4 315SA446BF4 315MA646BF4 315SA446BF4 315MA646
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.3/0.10.3/0.1
0.5/0.150.65/0.220.5/0.150.65/0.22
1.1/0.321.6/0.51.1/0.321.6/0.5
2/0.62.4/0.75
2/0.62.4/0.75
3.45/1.13.45/1.1
4.6/1.356.2/1.87.2/2.14.6/1.356.2/1.87.2/2.1
10/3.314.5/4.510/3.3
14.5/4.5
16/520/6.516/5
20/6.5
22.7/7.527/9
22.7/7.527/9
34/1234/12
42/1542/15
50/18.566/22
50/18.566/22
80/3095/3780/3095/37
0.4/0.130.4/0.13
0.7/0.20.9/0.30.7/0.20.9/0.3
1.5/0.42.1/0.71.5/0.42.1/0.7
2.7/0.83.2/1
2.7/0.83.2/1
4.6/1.54.6/1.5
6.1/1.88.3/2.59.6/2.86.1/1.88.3/2.59.6/2.8
14/4.519/6
14/4.519/6
21/6.827/8.821/6.827/8.8
30/1037/1230/1037/12
45/1645/16
56/2056/20
67/2590/3067/2590/30
110/40130/50110/40130/50
5.85.8
9999
15
15
1820.518
20.5
2525
4545
4545
81
81
113
113
149
149
445445
510595510595
750820750820
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 31 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
American Metric® Corporation 109
TWO SPEED MOTOR (FOR FAN APPLICATION) METRIC IEC STANDARD
* All Ametric® Motors are designed to operate domestically at 60Hz and for export at 50Hz (with a corresponding change in voltage andRPMs) and are available with either foot or flange mountings. For outputs lower than 3 kw . terminals = 220-240V/250-280V 50/60Hz & Yterminals = 380-415V/440-480V 50/60Hz. For outputs greater than 3 kw only . terminals available at 380-415V/440-480V 50/60Hz . (voltagevariation -5% +6%)
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
50Hz* 1000/750 RPM 6/8 Pole220-240V or 380-415V
1200/900 RPM 6/8 Pole250-280 or 440-480V
60Hz*
BF5 71M468BF5 71M468
BF5 80M668BF5 80M668BF5 80M668BF5 80M668
BF5 90S468BF5 90L668BF5 90S468BF5 90L668
BF5 100L268BF5 100L468BF5 100L268BF5 100L468
BF5 112M468BF5 112M468
BF5 132S868BF5 132M868BF5 132S868BF5 132M868
BF5 160M468BF5 160M468BF5 160L668BF5 160M468BF5 160M468BF5 160L668
BF5 180L468BF5 180L668BF5 180L468BF5 180L668
BF5 200L668BF5 200L868BF5 200L668BF5 200L868
BF5 225M468BF5 225M468
BF4 250M468BF4 250M468
BF4 280SA468BF4 280MA668BF4 280MA868BF4 280SA468BF4 280MA668BF4 280MA868
BF4 315SA668BF4 315MA668BF4 315SA668BF4 315MA668
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.12/0.050.12/0.05
0.25/0.080.3/0.1
0.25/0.080.3/0.1
0.45/0.180.6/0.240.45/0.180.6/0.24
1.1/0.51.4/0.61.1/0.51.4/0.6
1.8/0.751.8/0.75
2.5/1.13.3/1.42.5/1.13.3/1.4
4/25/2.57.1/34/2
5/2.57.1/3
10/514/6.210/5
14/6.2
17/824/11.5
17/824/11.5
28/1328/13
33/1733/17
37/18.545/2258/27
37/18.545/2258/27
75/3382/3675/3382/36
0.16/0.070.16/0.07
0.34/0.10.4/0.130.34/0.10.4/0.13
0.6/0.250.8/0.330.6/0.250.8/0.33
1.5/0.71.9/0.81.5/0.71.9/0.8
2.5/12.5/1
3.4/1.54.5/1.93.4/1.54.5/1.9
5.5/2.76.8/3.49.5/4
5.5/2.76.8/3.49.5/4
14/6.819/8.314/6.819/8.3
23/1133/15.323/11
33/15.3
37/1837/18
45/2345/23
50/2560/3079/3750/2560/3079/37
100/45109/48100/45109/48
5.85.8
9999
15
15
1820.518
20.5
2525
47
47
696981696981
115
115
205205
405405
470
470
790
790
Ametric® Page 32 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
110 American Metric® Corporation
SINGLE PHASE TEFC CAPACITOR RUN METRIC IEC STANDARD
50Hz 3000RPM 2 Pole110V or 220V
3600RPM 2 Pole115V or 230V
60Hz
50Hz 1500RPM 4 Pole110V or 220V
1800RPM 4 Pole115V or 230V
60Hz
50Hz 1000RPM 6 Pole110V or 220V
1200RPM 6 Pole115V or 230V
60Hz
BF5C 71M42BF5C 71M42BF5C 71M42BF5C 71M62BF5C 71M42BF5C 71M42BF5C 71M42BF5C 71M62
BF5C 80M42BF5C 80M42
BF5C 90S22BF5C 90L42BF5C 90S22BF5C 90L42
BF5C 100L42BF5C 100L42
BF5C 112M42BF5C 112M42
FOOTFOOTFOOTFOOT
FLANGEFLANGEFLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
0.180.250.370.550.180.250.370.55
0.750.75
1.11.51.11.5
2.22.2
33
0.240.340.500.740.240.340.500.74
1.011.01
1.472.011.472.01
2.952.95
4.024.02
BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44BF5C 71M44
BF5C 80M44BF5C 80M64BF5C 80M44BF5C 80M64
BF5C 90L44BF5C 90L64BF5C 90L44BF5C 90L64
BF5C 100L44BF5C 100L44
BF5C 112M44BF5C 112M44
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
0.180.250.370.180.250.37
0.550.750.550.75
1.11.51.11.5
2.22.2
33
0.240.340.500.240.340.50
0.741.010.741.01
1.472.011.472.01
2.952.95
4.024.02
5.95.95.96.35.95.95.96.3
9.29.2
12.314.012.314.0
20.520.5
17.517.5
6.06.06.06.06.06.0
8.69.48.69.4
13.615.313.615.3
21.521.5
25.525.5
BF5C 71M46BF5C 71M46
BF5C 80M46BF5C 80M66BF5C 80M66BF5C 80M46BF5C 80M66BF5C 80M66
BF5C 90L66BF5C 90L66
BF5C 100L46BF5C 100L46
BF5C 112M46BF5C 112M46
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFLANGE
FOOTFLANGE
FOOTFLANGE
0.120.12
0.180.250.370.180.250.37
0.550.55
0.750.75
1.11.1
0.160.16
0.240.340.500.240.340.50
0.740.74
1.011.01
1.471.47
6.06.0
8.59.29.28.59.29.2
15.015.0
20.520.5
25.525.5
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 33 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
MT Type Single Phase Motors with a run capacitor permanetly turned on and connected to the axillary winding for starting
American Metric® Corporation 111
SINGLE PHASE TEFC CAPACITOR START/RUN METRIC IEC STANDARD
50Hz 3000RPM 2 Pole110V or 220V
3600RPM 2 Pole115V or 230V
60Hz
50Hz
60Hz
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
1500RPM 4 Pole110V or 220V
1800RPM 4 Pole115V or 230V
BF5D 71M42BF5D 71M62BF5D 71M42BF5D 71M62
BF5D 80M42BF5D 80M42BF5D 80M42BF5D 80M42
BF5D 90L42BF5D 90L62BF5D 90L42BF5D 90L62
BF5D 100L42BF5D 100L42
PPGG
PPGG
PPGG
PG
0.500.740.500.74
1.011.471.011.47
2.012.952.012.95
4.024.02
5.96.35.96.3
9.89.89.89.8
15.515.515.515.5
22.022.0
0.370.550.370.55
0.751.1
0.751.1
1.52.21.52.2
33
BF5D 71M44BF5D 71M44BF5D 71M44BF5D 71M44
BF5D 80M44BF5D 80M64BF5D 80M44BF5D 80M64
BF5D 90L44BF5D 90L64BF5D 90L44BF5D 90L64
BF5D 100L44BF5D 100L44
PPGG
PPGG
PPGG
PG
0.340.500.340.50
0.741.010.741.01
1.472.011.472.01
2.952.95
5.95.95.95.9
10.010.010.010.0
16.516.516.516.5
23.023.0
0.250.370.250.37
0.550.750.550.75
1.11.51.11.5
2.22.2
Ametric® Page 34 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
XN-XF Type Single Phase Motors where a high starting torque is required. Can be equipped with an auxiliary capacitor which is connected only in the starting phase.
112 American Metric® Corporation
1500RPM 4 Pole110V or 220V
1800RPM 4 Pole115V or 230V
SINGLE PHASE TEFC CAPACITOR START METRIC IEC STANDARD
BF5M 71M42BF5M 71M42BF5M 71M62BF5M 71M42BF5M 71M42BF5M 71M62
BF5M 80M42BF5M 80M42
BF5M 90S22BF5M 90L42BF5M 90L62BF5M 90S22BF5M 90L42BF5M 90L62
BF5M 100L42BF5M 100L42
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFLANGE
FOOTFOOTFOOT
FLANGEFLANGEFLANGE
FOOTFLANGE
0.240.340.500.240.340.50
0.740.74
1.011.472.011.011.472.01
2.952.95
50Hz 3000RPM 2 Pole110V or 220V
3600RPM 2 Pole115V or 230V
60Hz
50Hz
60Hz
BF5M 71M44BF5M 71M44BF5M 71M44BF5M 71M44
BF5M 80M44BF5M 80M44
BF5M 90S24BF5M 90L64BF5M 90S24BF5M 90L64
BF5M 100L44BF5M 100L44BF5M 100L44BF5M 100L44
FOOTFOOT
FLANGEFLANGE
FOOTFLANGE
FOOTFOOT
FLANGEFLANGE
FOOTFOOT
FLANGEFLANGE
0.180.250.180.25
0.370.37
0.550.750.550.75
1.11.51.11.5
5.95.96.35.95.96.3
9.89.8
12.514.515.512.514.515.5
21.021.0
6.06.06.06.0
9.09.0
12.215.512.215.5
22.022.022.022.0
0.180.250.370.180.250.37
0.550.55
0.751.11.50.751.11.5
2.22.2
0.240.340.240.34
0.500.50
0.741.010.741.01
1.472.011.472.01
PartNumber
WeightkgHPkW
TypeMount
PartNumber
WeightkgHPkW
TypeMount
Ametric® Page 35 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
XN-XF Type Single Phase Motors where a high starting torque is required. Can be equipped with an auxiliary capacitor which is connected only in the starting phase.
American Metric® Corporation 113
TEFC SINGLE-PHASE MOTORS
Ametric® Page 36 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.
114 American Metric® Corporation
TEFC SINGLE-PHASE MOTORS
Ametric® Page 37 Motors IEC Techinical Data.pdf Date 09/26/16G = B5 Flange unless otherwise specified.