1
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Security Level:
47pt
www.huawei.com
Configure IP BTS via
CME GUI
2
HUAWEI TECHNOLOGIES CO., LTD. Page 2Huawei Confidential
Right click the MBSC icon. Click ‘GSM BTS TOPOLOGY’.
3
HUAWEI TECHNOLOGIES CO., LTD. Page 3Huawei Confidential
Select the subrack no. and slot no. of the interface board to which the BTS will
connect. For example, it should be an FG2a working in IP mode.
Right click the interface board and then click ‘Add Site’.
4
HUAWEI TECHNOLOGIES CO., LTD. Page 4Huawei Confidential
Fill in the parameters according to the planned data.
BTS IP = BTS traffic IP; BSC IP = BSC IP that connect to this BTS
This project has some naming rules of BTS in the next page. Please obey them.
5
HUAWEI TECHNOLOGIES CO., LTD. Page 5Huawei Confidential
Rules for add BTS
6
HUAWEI TECHNOLOGIES CO., LTD. Page 6Huawei Confidential
Double click the new BTS icon
7
HUAWEI TECHNOLOGIES CO., LTD. Page 7Huawei Confidential
This step is just for the BTS that use APM30 cabinet.
Right click SRN 7, SN 0, and then click ‘Add PMU’.
8
HUAWEI TECHNOLOGIES CO., LTD. Page 8Huawei Confidential
Add boards according to the planned data.
This page is showing the APM30 cabinet. For Virtual cabinet, there is only Subrack
0.
9
HUAWEI TECHNOLOGIES CO., LTD. Page 9Huawei Confidential
Right click ‘TOPO’, click ‘Add RXUCHAIN’
10
HUAWEI TECHNOLOGIES CO., LTD. Page 10Huawei Confidential
Fill the parameters according to the planned data.
This project has some naming rules of RXUCHAIN in the next page. Please obey
them.
*For more than 1 RXUCHAIN, please repeat these two steps.
11
HUAWEI TECHNOLOGIES CO., LTD. Page 11Huawei Confidential
Configure all the BTSRXUCHAIN according to the BTS layout:
RXUCHAIN0: 0-0-6-0
RXUCHAIN0: 0-0-6-1
RXUCHAIN0: 0-0-6-2
Rules of RXUCHAIN
12
HUAWEI TECHNOLOGIES CO., LTD. Page 12Huawei Confidential
Right click RXUCHAIN on which the MRRU board will be.
Click ‘Add’ -> ‘Add MRRU’.
Add MRRU in RXUCHAIN
13
HUAWEI TECHNOLOGIES CO., LTD. Page 13Huawei Confidential
Fill the parameters according to the planned data.
Is Configure Check Threadhold = YES
Forward Bandwidth = 125Receive Bandwidth = 250
Power Bandwidth = CLASS0
This project has some naming rules of MRRU in the next 2 page. Please obey
them.
*For more than 1 MRRU board, please repeat these 2 steps.
14
HUAWEI TECHNOLOGIES CO., LTD. Page 14Huawei Confidential
Rules of MRRU (1)
Add RFU ADD BTSRXUBRD
Subrack No. = 60 + CPRIPort + (Position - 1)*6
Slot No. = 0
RXU Chain No. = CPRIPort
Position = 1 + cascadeNo.
15
HUAWEI TECHNOLOGIES CO., LTD. Page 15Huawei Confidential
Rules of MRRU (2)
16
HUAWEI TECHNOLOGIES CO., LTD. Page 16Huawei Confidential
MRRU/GRRU Second Receive Mode = DOUBLE_ANTENNA
Configure ‘Working Standard’ according to the planned area.
Adjust BTSRXUBP
17
HUAWEI TECHNOLOGIES CO., LTD. Page 17Huawei Confidential
Right click the BTS icon
Click ‘BTS Configuration Express’
Adjust BTS parameters
18
HUAWEI TECHNOLOGIES CO., LTD. Page 18Huawei Confidential
BTS Basic Attrbutes -> BTS -> BTS Description
BTS description = BTS name-siteLocation: 125GHI-Ghimpati
Configure BTS Description
19
HUAWEI TECHNOLOGIES CO., LTD. Page 19Huawei Confidential
Configure BTSESN according to the actual data.1. Click ‘+‘
2. Fill in the esn3. Click ‘√√√√‘
Configure BTSESN
20
HUAWEI TECHNOLOGIES CO., LTD. Page 20Huawei Confidential
Clock Protocol Type = ‘PTP’Clock Synchronizaton Mode = ‘INTERSYN’
Domain = ‘0’Configure IP address according to the planned area.
Configure BTSIPCLKPARA
21
HUAWEI TECHNOLOGIES CO., LTD. Page 21Huawei Confidential
‘BTS Transmission Link’ -> ‘IP BTS Route’Destination IP address is the ip segment of MBSC Port IP
Destination address mask is the mask of MBSC Port IP
Forward route address is the gateway of BTS traffic IP
Configure BTSIPRT
22
HUAWEI TECHNOLOGIES CO., LTD. Page 22Huawei Confidential
Single click the BTS iconRight click on the right panel, click ‘Add Cell’
Following shows the GCell configuration
23
HUAWEI TECHNOLOGIES CO., LTD. Page 23Huawei Confidential
Fill the parameters according to the planned data
24
HUAWEI TECHNOLOGIES CO., LTD. Page 24Huawei Confidential
Right click the cell
Click ‘Assign Frequency’
Following shows the Freq configuration
25
HUAWEI TECHNOLOGIES CO., LTD. Page 25Huawei Confidential
Select the frequency
Click ‘OK’
26
HUAWEI TECHNOLOGIES CO., LTD. Page 26Huawei Confidential
Right click the cell
Click ‘Add TRX’
Following shows the TRX configuration
27
HUAWEI TECHNOLOGIES CO., LTD. Page 27Huawei Confidential
Select the cell in the Cell List
Click ‘Add Binding(s)’
28
HUAWEI TECHNOLOGIES CO., LTD. Page 28Huawei Confidential
Fill the ‘Logical TRX No.’ according to the planned dataSelect TRX Board; select TRX Board Channel
For the BCCH Frq, please check the checkBox in front of the ‘Main BCCH’Click ‘Bind TRX’ to bind frequency to trx channel.
29
HUAWEI TECHNOLOGIES CO., LTD. Page 29Huawei Confidential
Set ‘Cell Hop Mode’ and ‘HSN’ according to the planned dataClick ‘Apply’
If you want to modify the maio, please double click on the little cell like the
blue circle.
30
HUAWEI TECHNOLOGIES CO., LTD. Page 30Huawei Confidential
Right click the cellClick ‘Cell Configuration Express’
Following shows the Cell configuration
31
HUAWEI TECHNOLOGIES CO., LTD. Page 31Huawei Confidential
Cell Attributes -> Basic GPRS Attributes of 2G CellConfigure ‘GPRS’, ‘NO’ and ‘Routing Area’ according to the planned data
32
HUAWEI TECHNOLOGIES CO., LTD. Page 32Huawei Confidential
Right click the trx
Click ‘TRX Configuration Express’
Following shows the TRX configuration
33
HUAWEI TECHNOLOGIES CO., LTD. Page 33Huawei Confidential
Power Type = 20W --Adjust this value according to the planned date
Shut Down Enabled = DISABLETCH Rate Adjust Allow = YES
Allow Dynamic Shutdown TRX = NO
Configure GTRXDEV
34
HUAWEI TECHNOLOGIES CO., LTD. Page 34Huawei Confidential
Set Channel Type to ‘PDTCH’ of Channel No. 6 of the Main BCCH TRX--According to the planned data
Configure GTRXCHAN
35
HUAWEI TECHNOLOGIES CO., LTD. Page 35Huawei Confidential
Transport -> MBSC -> GSM -> GB -> PTP BVC
Configure PTP BVC according to the planned data
Add PTP BVC
36
HUAWEI TECHNOLOGIES CO., LTD. Page 36Huawei Confidential
Transport -> MBSC -> GSM -> Abis -> Adjacent Node
Add adjnode according to the planned dataAdjacent Node Name = BTS Name
Add AdjNode
37
HUAWEI TECHNOLOGIES CO., LTD. Page 37Huawei Confidential
Transport -> MBSC -> GSM -> Abis -> Adjacent Node Mapping
Gold user TRMMAP index = 43Factor table index =20
Add AdjMap
38
HUAWEI TECHNOLOGIES CO., LTD. Page 38Huawei Confidential
Transport -> MBSC -> GSM -> Abis -> IP Path
Add IP path according to the planned data
Add IP Path
39
HUAWEI TECHNOLOGIES CO., LTD. Page 39Huawei Confidential
Transport -> MBSC -> GSM -> Abis -> IP Route
Fill the Subrack No. and Slot No. according to the planned data.Destination IP address is the ip segment of BTS traffic IP
Destination address mask is the mask of BTS traffic IP
Forward route address is the gateway of BSC port IP
Add IP Route
40
HUAWEI TECHNOLOGIES CO., LTD. Page 40Huawei Confidential
Export MML Script
41
HUAWEI TECHNOLOGIES CO., LTD. Page 41Huawei Confidential
The MML folder
Click the link. You can open the folder contains the MML script.
42
Thank youwww.huawei.com