OWNER MANUALSS-150
Attach Proof of Purchase to This Page
Adjunte prueba de compra a esta página
1
CONTENTS
PRODUCT INSTALLATION
Before Installation . . . . . . . . . . . . . . . . . . . Page 5
Installing the Bidet Attachment . . . . . . . . Page 5
PRODUCT OPERATION
Using the SimpleSpa . . . . . . . . . . . . . . . . . Page 9
MAINTENANCE
Cleaning the SimpleSpa . . . . . . . . . . . . . . Page 9
Short Term Non-Use . . . . . . . . . . . . . . . . . Page 9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
CONTACT . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
SPANISH VERSION . . . . . . . . . . . . . . . . . . Page 12
PRODUCT INFORMATION
Product Features . . . . . . . . . . . . . . . . . . . . Page 2
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Product Dimensions. . . . . . . . . . . . . . . . . . Page 4
2
PRODUCT INFORMATION
PRODUCT FEATURES
• High-quality ABS material with full body panel
• Hygienic retractable nozzle
• Self-cleaning nozzle feature
• Ambient temperature bidet wash
• Adjustable water pressure
• Ceramic-core internal valve
• High-quality metal 7/8” T-valve
• Durable braided metal cold water hose
• No electricity or batteries required
• Easy installation and adjustable toilet fit
• All accessories included for standard installation
• One-year warranty
3
PARTS LIST
Bidet attachment with ergonomic control
T-Valve connector with included rubber cone
washer(7/8" x 7/8" x 3/8")
Teflon Tape
Adjustablemounting brackets (2)
27.5” braided metal bidet hose
4
PRODUCT DIMENSIONS
PRODUCT INFORMATION (cont.)
9.3"
2.95"
1.6" at deepest pointon control
0.2" deep
15.4"
7.4"
4.7"
2.0"
5
BEFORE INSTALLATION
PRODUCT INSTALLATION
IMPORTANTPlease be advised that the provided T-Valve should be installed at the Fill Valve under the toilet tank, and NOT at the cold water supply coming from the wall.
If you do not have access to the Fill Valve under the toilet tank, contact Brondell Customer Service at 888.542.3355. We may be able to provide alternative options.
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water shut-off valve at the wall. If it is a rigid pipe, you will need to purchase a flexible water supply hose to replace it before installing the SimpleSpa. The length of the hose you purchase may vary, but the top connection size should be 7/8” Ballcock (to connect to the T-valve that you will install under the toilet tank), and the bottom connection will be 3/8” or ½” female compression (to connect at the shut-off valve at the wall).
1. Remove the existing toilet seat.a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting bolts. Alternatively, you may need to loosen mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat, mounting bolts, and hardware aside.
INSTALLING THE BIDET ATTACHMENT
Step 1b
6
PRODUCT INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT (cont.)
Step 2c
2. Turn off water supply valve and flush toilet.a. Turn off water supply at the wall to stop flow of
water.b. Flush toilet and hold down handle to completely
empty toilet tank.c. Disconnect water supply hose from the fill valve
under the toilet tank.
3. Connect 7/8” T-Valve to Water Supply Line and Fill Valve Under Toilet Tank.a. Install the 7/8” T-valve with included rubber
washer to the incoming water connection on the bottom of your toilet tank. Ensure the rubber washer is properly seated, tapered side up.
b. Connect the cold water supply line coming from the wall to the bottom of the T-valve.
4. Connect the Bidet Hose to the T-Valve.a. The ends of the bidet hose are two different
sizes. Determine which is the smaller of the two ends.
b. Connect the smaller end of the braided metal bidet hose to the remaining open side of the installed T-valve.
Step 3a
Step 3b
Step 4b
5. Install Adjustable Mounting Brackets into the bidet attachmenta. Line up the dots of one of the adjustable
mounting brackets with the dots around one of the open mounting bracket holders.
b. Push the bracket into the bracket holder until it snaps into place.
c. Repeat Steps 1 and 2 to install the other adjustable mounting bracket.
7
INSTALLING THE BIDET ATTACHMENT (cont.)
6. Install Bidet Attachment on Toilet.a. Place bidet attachment on the toilet so the nozzle
is as close to the back of the toilet bowl as it will go. This will vary by toilet.
b. Make sure the adjustable brackets line up with the holes in the toilet fixture. You may need to rotate the adjustable brackets accordingly to line up properly.
c. Replace the toilet seat on top of bidet attachment and secure using original toilet seat hardware. Make sure to tighten so that the bidet attachment and seat do not move.
d. Ensure the control knob is lying flat and isn’t turned to one of the operating positions to prevent water from accidently spraying out of the toilet bowl.
Step 5a
Step 5b
Step 5c
8
PRODUCT INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT (cont.)
7. Turn on the Water Supply and check for leaks.a. Open the main water supply valve slowly and
check for leaks.b. Wait 5-10 minutes, check again and if there are
no leaks continue.
6. Connect the Bidet Hose to the Bidet Attachmenta. Connect open end of bidet hose to the
connection underneath the bidet attachment.
Step 6a
NOTE:
• If there is any leaking, check all rubber washers and make sure all water connections are tight and secure. If necessary, you can use the provided Teflon Tape (Plumber’s Tape) for any leaking connections.
9
PRODUCT OPERATION
USING THE SIMPLESPA
To clean the bidet nozzle, turn the control arm to the left towards the “Nozzle Cleaning” position and water will wash over the nozzle.
For the general bidet wash function, turn the control arm to the right towards the “Wash” position.• The further the arm is turned, the higher the water pressure will be.• To lower the water pressure, turn the arm back towards the center.• To stop the flow of water, rotate the arm to center so it sits flat.
To clean the nozzle, open the Nozzle Guard door by pulling it gently open on the right side. With the nozzle revealed, pull down on the nozzle cap, and clean the spray holes and nozzle using a toothbrush or soft cloth and mild detergent (such as dish soap). When cleaning, be careful not to drop or flush the nozzle cap. Periodically tighten the cap so it doesn’t become loose with use and cleaning.
To clean the SimpleSpa, use a mild cleaner such as Simple Green or Windex spray. Do not scrub or use harsh, abrasive products to clean the SimpleSpa, which may scratch the product.
MAINTENANCE
SHORT TERM NON-USE
CLEANING THE SIMPLESPA
If the product will not be used for more than a few weeks, you may consider shutting the water supply off at the wall for extra precaution.
10
WARRANTY
Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell warrants that all products (excluding consumable items) shall be free from defects in material and workmanship under normal use and service.
SimpleSpa SS-150 Residential One-Year Limited Warranty
100% Coverage of all parts and labor for the entire product for the first year from original date of purchase.
SimpleSpa SS-150 Commercial Warranty
Warranty period 1 year from original purchase date for all Brondell products. Warranties may not apply to products that are used for heavy commercial, hospital, or other high use non-residential applications.
Exclusions and Limitations
1. BRONDELL warrants its products to be free from manufacturing defects under normal use and service. This warranty is extended only to the ORIGINAL PURCHASER.
2. BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. BRONDELL reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts in connection with warranty repairs for the first three years from date of purchase on all products except those that may be subject to commercial use limitations.
3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or re-installation of products. This warranty does NOT apply to:
• Damage or loss which occurs during shipment.• Damage or loss sustained through any natural or man-made causes beyond the control of
BRONDELL, including but not limited to fire, earthquake, floods, etc.• Damage or loss resulting from sediments or foreign matter contained in a water system.• Damage or loss resulting from negligent or improper installation including installation of a unit in a
harsh or hazardous environment.• Damage or loss resulting from removal, improper repair, modification of the product, or improper
maintenance including damage caused by chlorine or chlorine related products • Damage or loss resulting from electrical surges, electrical outages, lightning strikes, or other acts
which are not the fault of Brondell or which the Product is not specified to tolerate.
4. This warranty gives you specific legal rights. You may have other rights which vary from state to state.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-paid to the closest Brondell authorized service center along with the RMA number and proof of purchase.
To obtain the RMA number and locate the BRONDELL Service Center location nearest you, please call1-888-542-3355.
11
CONTACT: Brondell, Inc.PO Box 470085San Francisco, CA 94147-0085Phone: 1-888-542-3355Email: [email protected]: www.brondell.comFor questions, contact Brondell Customer Service: 1-888-542-3355
MANUFACTURED BY:
Brondell, Inc.PO Box 470085San Francisco, CA 94147-0085
Please retain receipt records for any warranty claims.
MANUAL DEL PROPIETARIOSS-150
13
CONTENIDO
INSTALACIÓN DEL PRODUCTO
Antes de la instalación . . . . . . . . . . . . . . . Página 5
Instalación del Accesorio para bidé . . . . Página 5
FUNCIONAMIENTO DEL PRODUCTO
Uso del SimpleSpa . . . . . . . . . . . . . . . . . . . Página 9
MANTENIMIENTO
Limpieza del SimpleSpa . . . . . . . . . . . . . . Página 9
Si no se usará a corto plazo . . . . . . . . . . . Página 9
Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 10
CONTACTO . . . . . . . . . . . . . . . . . . . . . . . . . Página 11
VERSIÓN EN ESPAÑOL . . . . . . . . . . . . . . Página 12
INFORMACIÓN DEL PRODUCTO
Características del producto . . . . . . . . . . Página 2
Lista de piezas . . . . . . . . . . . . . . . . . . . . . . Página 3
Dimensiones del producto . . . . . . . . . . . . Página 4
14
INFORMACIÓN DEL PRODUCTO
CARACTERÍSTICAS DEL PRODUCTO
• Material ABS de alta calidad con panel completo
• Higiénica boquilla retráctil
• Función de autolimpieza de la boquilla
• Lavado de bidé a temperatura ambiente
• Presión de agua ajustable
• Válvula interna de núcleo de cerámica
• Válvula T de 7/8” de metal de alta calidad
• Manguera durable de metal trenzado de bidé
• No requiere electricidad ni baterías
• Fácil instalación y ajustable al inodoro
• Se incluyen todos los accesorios para una instalación estándar
• Garantía de un año
15
LISTA DE PIEZAS
Accesorio para bidé con control ergonómico
Conector de válvula T con junta cónica de goma
incluida(7/8" x 7/8" x 3/8")
Cinta selladora
Ajustablesoportes de montaje (2)
Manguera de metal trenzado de bidé de 27.5”
16
DIMENSIONES DEL PRODUCTO
INFORMACIÓN DEL PRODUCTO (cont.)
X.X"
X.X"
1.6" en el punto más bajoen el panel de control
0.2" bajo
15.4"
X.X"
4.7"
2.0"
17
ANTES DE LA INSTALACIÓN
INSTALACIÓN DEL PRODUCTO
IMPORTANTEPor favor, tenga en cuenta que la válvula T proporcionada se debe instalar en la válvula de llenado debajo del tanque del inodoro y NO en el suministro de agua fría que sale de la pared.
Si usted no tiene acceso a la válvula de llenado debajo del tanque del inodoro, póngase en contacto con el Servicio al cliente de Brondell por el 888.542.3355. Quizás podamos ofrecerle opciones alternativas.
Revisar la línea de suministro de agua
Revise la línea de suministro de agua que conecta la válvula de llenado del tanque del inodoro con la válvula de corte de agua en la pared. Si es una tubería rígida, deberá comprar una manguera flexible de suministro de agua antes de instalar el SimpleSpa. La extensión de la manguera que compre puede variar, pero el tamaño de la conexión superior debe ser una válvula de flotador de 7/8" (para conectarse a la válvula T que usted instalará debajo del tanque del inodoro) y la conexión inferior debe ser hembra de 3/8” o ½” (para conectar en la válvula de cierre en la pared).
1. Retirar el asiento del inodoro existente.a. Levante las cubiertas de las bisagras y use un
destornillador plano o de estrella para retirar los pernos de montaje. Alternativamente, es posible que deba aflojar los pernos de montaje debajo del asiento.
b. Retire el asiento del inodoro y coloque el asiento, los pernos de montaje y los accesorios de montaje a un lado.
INSTALACIÓN DEL ACCESORIO PARA BIDÉ
Paso 1b
18
INSTALACIÓN DEL PRODUCTO (cont.)
INSTALACIÓN DEL ACCESORIO PARA BIDÉ (cont.)
Paso 2c
2. Cerrar la válvula de suministro de agua y descargar el inodoro.a. Cierre el suministro de agua en la pared para
detener el flujo de agua.b. Descargue el inodoro y mantenga presionada la
palanca para vaciar completamente el tanque del inodoro.
c. Desconecte la manguera de suministro de agua de la válvula de llenado.
3. Conectar la válvula T de 7/8" a la línea de sumi-nistro de agua y la válvula de llenado debajo del tanque del inodoro.a. Instale la válvula T de 7/8" con la junta de
goma incluida en la conexión de agua entrante en la parte inferior del tanque del inodoro. Asegúrese de que la junta de goma esté fijada adecuadamente, con la parte cónica hacia arriba.
b. Conecte la línea de suministro de agua fría de la pared a la parte inferior de la válvula T.
4. Conectar la manguera del bidé a la válvula T.a. Conecte el extremo más grande de la manguera
de metal trenzado de bidé al extremo que queda abierto de la válvula T instalada.
Paso 3a
Paso 3b
Paso 4a
5. Instalar los soportes de montaje ajustables en el accesorio para bidéa. Alinee los puntos de uno de los soportes de
montaje ajustable con los puntos alrededor de una de las bases abiertas de los soportes de montaje.
b. Empuje el soporte en la base del soporte hasta que calce en su lugar.
c. Repita los pasos 1 y 2 para instalar el otro soporte de montaje ajustable.
19
INSTALACIÓN DEL ACCESORIO PARA BIDÉ (cont.)
6. Instalar el accesorio para bide sobre el inodoroa. Coloque el accesorio para bidé sobre el
inodoro de forma que la boquilla quede tan cerca como sea posible de la parte trasera de la taza del inodoro. Esto varía según el modelo del inodoro.
b. Asegúrese de que los soportes ajustables estén alienados con los orificios de la estructura del inodoro. Quizás necesite rotar los soportes ajustables según convenga para que se alineen adecuadamente.
c. Vuelva a colocar el asiento del inodoro sobre el accesorio para bidé y asegúrelo con las piezas originales del asiento del inodoro. Asegúrese de apretar, de forma que el accesorio para bidé y el asiento no se muevan.
d. Asegúrese de que la perilla de control se encuentre en una posición neutral y no esté girada hacia una de las posiciones de funcionamiento para evitar que el agua salga de la taza del inodoro.
Paso 5a
Paso 5b
Paso5c
20
INSTALACIÓN DEL PRODUCTO (cont.)
7. Abrir el suministro de agua y verificar si hay fugasa. Abra la válvula de suministro de agua principal
lentamente y verifique que no haya fugas.b. Espere de 5 a 10 minutos, verifique nuevamente
y, si no encuentra fugas, continúe.
6. Conectar la manguera del bidé con el accesorio para bidéa. Conecte el extremo abierto de la manguera del
bidé con la conexión debajo del accesorio para bidé.
Paso 6a
NOTA:
• Si hay alguna fuga, verifique todas las juntas de goma y asegúrese de que todas las conexiones de agua estén apretadas y seguras. Si es necesario, puede utilizar la cinta selladora (cinta de plomero) para cualquier conexión con fuga.
INSTALACIÓN DEL ACCESORIO PARA BIDÉ (cont.)
21
FUNCIONAMIENTO DEL PRODUCTO
USO DEL SIMPLESPA
Para limpiar la boquilla del bidé, gire la perilla de control a la izquierda hasta la posición "Nozzle Cleaning" (limpieza de la boquilla) y el agua lavará la boquilla.
Para la función de lavado general del bidé, gire la perilla a la derecha hacia la posición"Wash" (lavar).• Mientras más se gire la perilla, mayor será la presión del agua.• Para disminuir la presión del agua, gire la boquilla de regreso al
centro.• Para detener el flujo del agua, rote la perilla al centro, de forma que
ocupe una posición neutral.
Para limpiar la boquilla, abra la puerta del protector de la boquilla halándola suavemente hacia el lado derecho. Con la boquilla expuesta, hale hacia abajo la tapa de la boquilla y limpie los orificios del rociador y la boquilla usando un cepillo de dientes o un trapo y un detergente suave (como jabón para platos). Al limpiar, tenga cuidado de no soltar ni descargar la tapa de la boquilla. Apriete la tapa de la boquilla periódicamente, de forma que no se afloje con el uso y la limpieza.
Para limpiar el bidé, utilice un limpiador suave como un aerosol Simple Green o Windex para limpiar el SimpleSpa. No restriegue ni use productos abrasivos para limpiar el SimpleSpa, los cuales pueden rayar el producto.
MANTENIMIENTO
SI NO SE USARÁ A CORTO PLAZO
LIMPIEZA DEL SIMPLESPA
Si el producto no se utilizará durante más de unas pocas semanas, usted puede considerar cerrar el suministro de agua en la pared como precaución adicional.
22
WARRANTYLos productos Brondell están respaldados por algunas de las garantías más completas en la industria. Brondell garantiza que todos los productos (con excepción de los consumibles) estarán libres de defectos en materiales y mano de obra bajo uso y servicio normales.
SimpleSpa SS-150 Garantía residencial limitada por 3 años
100% de cobertura en todas las partes y mano de obra para todo el producto durante el primer año a partir de la fecha original de compra.
SimpleSpa SS-150 Garantía comercial
Garantía de 1 año a partir de la fecha original de compra para todos los productos Brondell. Las garantías pueden no aplicar en productos que se usan en comercios, hospitales u otros sitios no residenciales de alta frecuencia de uso.
Exclusiones y limitaciones
1. BRONDELL garantiza que sus productos están libres de cualquier tipo de defectos de fabricación, en condiciones de uso y servicio normales. Esta garantía se extiende solo al COMPRADOR ORIGINAL.2. Las obligaciones de BRONDELL, según esta garantía, se limitan a reparaciones o reemplazos, a criterio de BRONDELL, de productos o partes que se encuentren defectuosas, en tanto tales productos hayan sido instalados adecuadamente y utilizados de acuerdo con las instrucciones. BRONDELL se reserva el derecho de realizar tales inspecciones según lo considere necesario, para determinar la causa del defecto. BRONDELL no cobrará por la reparación o reemplazo de partes en relación con reparaciones de garantía durante el primer año, a partir de la fecha de compra de todos los productos, a excepción de aquellos que puedan estar sujetos a limitaciones de uso comercial.3. BRONDELL no se responsabiliza por los costos de renovación, devolución (envío) o reinstalación de productos. Esta garantía NO se aplica en los siguientes casos:
• Daño o extravío durante el envío.• Daño o extravío producido por causas naturales o humanas, que exceden a los controles de
BRONDELL, incluidos incendios, sismos, inundaciones, etc.• Daño o extravío como resultado de sedimentos o material extraño contenido en el sistema de agua.• Daño o extravío como resultado de negligencia o instalación inadecuada, incluida la instalación de
una unidad en un medioambiente hostil o peligroso.• Daño o extravío como resultado de la renovación, reparación inadecuada o modificación del
producto, o el mantenimiento inadecuado, incluido el daño causado por el cloro o productos derivados del cloro
• Daño o extravío como resultado de actos que no son responsabilidad de Brondell para los cuales el producto no está específicamente preparado.
4. Esta garantía le otorga derechos legales específicos. Usted puede ejercer otros derechos, según el estado donde se encuentre.
ESTA GARANTÍA ESCRITA ES LA ÚNICA EMITIDA POR BRONDELL. LA REPARACIÓN O EL REEMPLAZO, SEGÚN LOS TÉRMINOS ESTABLECIDOS POR ESTA GARANTÍA, CONSTITUYEN LA ÚNICA SOLUCIÓN DISPONIBLE PARA EL COMPRADOR. BRONDELL NO SE RESPONSABILIZA POR EL EXTRAVÍO DE USO DEL PRODUCTO U OTROS DAÑOS INCIDENTALES, ESPECIALES, RESULTANTES O POR LOS GASTOS INCURRIDOS POR EL COMPRADOR, GASTOS DE TRABAJO, OTROS COSTOS DERIVADOS DE LA INSTALACIÓN O EXTRACCIÓN DEL PRODUCTO, COSTOS DE REPARACIÓN POR PARTE DE TERCEROS O CUALQUIER OTRO TIPO DE GASTOS NO ESPECIFICADOS ANTERIORMENTE. A EXCEPCIÓN DEL ALCANCE APLICABLE DE LA LEY, CUALQUIER TIPO DE GARANTÍA IMPLÍCITA, INCLUSO LA DE COMERCIABILIDAD, QUEDA EXPRESAMENTE LIMITADA A LA DURACIÓN DE ESTA GARANTÍA. ALGUNOS ESTADOS NO PERMITEN LIMITACIONES, POR LO QUE ES POSIBLE QUE LAS LIMITACIONES Y EXCLUSIONES ANTERIORES NO SE APLIQUEN A SU CASO.
Cómo Obtener Servicio
Para obtener servicio de reparación bajo esta garantía, debe comunicarse con un Centro de Servicios BRONDELL autorizado para obtener un número de RMA (Autorización de devolución de mercadería). La unidad devuelta debe estar acompañada de una copia del comprobante de compra original para que la garantía sea válida. Lleve o envíe la unidad prepaga al Centro de Servicios BRONDELL autorizado más cercano, junto con su número de RMA y el comprobante de compra.
Para obtener su número de RMA y para localizar el Centro de Servicios BRONDELL más cercano, llame al 1-888-542-3355.
23
CONTACT: Brondell, Inc.PO Box 470085San Francisco, CA 94147-0085Phone: 1-888-542-3355Email: [email protected]: www.brondell.comFor questions, contact Brondell Customer Service: 1-888-542-3355
MANUFACTURED BY:
Brondell, Inc.PO Box 470085San Francisco, CA 94147-0085
Please retain receipt records for any warranty claims.
brondell.com • 1-888-542-3355 • PO Box 470085 San Francisco, CA 94147
SS-150 SimpleSpa Thinline Bidet Attachment
OTHER FEATURES
• All-metal 7/8” cold water T-valve (the competition uses plastic)
• High quality braided metal hose for cold water connection• Anti-bacterial ABS material with full body panel• No electricity or batteries required• All accessories included for standard installation• One (1) year limited warranty• Dimensions: 15.4” (W) x 7.4” (D)
1. SafeCore ceramic internal valve2. Easy-to-use, ergonomic controls3. Adjustable water pressure4. Self-cleaning nozzle function5. Slim form factor6. Full adjustability for easy toliet fit7. Nozzle guard and retractable nozzle