• About the lab
• Lab in charge short profile
• Lab equipments name
• Labs photo
Lab Details of Communication and Networking Division
Name of the
Lab
About the Lab Lab In- Charge and
his/her Profile
Lab
Equipments
Name
Labs Photo
Microwave
Engineering
Lab
Mr.S.Sugumaran
M.E.(Optical
Communication)
(Ph.D.) – (Optical
Networks)
1. GUNN based
Power supply
2. Reflex
klystron based
supply
3. Reflex
klystron based
supply
4. microwave
bench
5. VSWR Meter
Optical
Communication
and Networks
Lab
Mr.S.Sugumaran
M.E.(Optical
Communication)
(Ph.D.) – (Optical
Networks)
1.Numerical
Aperture setup
2.Folcon Kit
Link A
3. Folcon Kit
Link B
4. Folcon Kit
Link C
5. Folcon Kit
Link D
Analog
Communication
lab
Mr.K.Muruganandam
M.E.(Communication
Engineering)
(Ph.D) – Wireless
1. CRO-30MHz
2. Function
Genrator 5 MHz
Communication 3.Power Supply
(0-30)V
4. Multimeter
5.Breadboard
Digital
Communication
Lab
Mrs.Usha Chauhan
M.E.(Communication
Emgineering)
(Ph.D) –
(Communication
Engineering)
1.Experimental
Kit
(Scientec)
2.DSO
3.Small Power
Supply
Information
Theory and
Coding Lab
Mr.S.Sugumaran
M.E.(Optical
Communication)
(Ph.D.) – (Optical
Networks)
1.Experimental
Kit
(Scientec)
2.DSO
3.Small Power
Supply
VLSI Division Laboratory Details
VLSI design Lab
VLSI design laboratory was setup in 2012 to facilitate and encourage education, research and
development. The research activities in the VLSI design lab mainly focus on Digital and Analog
circuit design. The VLSI design lab is well-equipped with some of the most modern facilities of
recent times. Hardware equipment includes FPGA development kits from Xilinx along with
high-end software tools and packages for VLSI design and synthesis namely Mentor Tools
Bundle, Xilinx ISE Foundation Software and Spartan - 6 Starter Kits.
Faculty in-charge of lab:
Mr. Mayank Kumar
B.Tech, M.Tech (DTU), PhD Pursuing.
Area of interest: Analog signal processing, VLSI Design
ASIC design lab
The ASIC Design Laboratory is a research laboratory for integrated-circuit (IC) design
researches. The research activities in the VLSI design lab mainly focus on the process of
designing application specific hardware implementations of algorithms for ASICs and FPGAs.
The scholar works with computer aided design tools to synthesize designs described in HDL
(hardware description languages). It includes synthesis and simulation, behavioral synthesis,
gate-level design, register transfer level design, design methodologies, finite state machines,
design reuse and intellectual property cores, and optimization. Hardware equipment includes
FPGA development kits from Xilinx and Xilinx ISE Foundation Software and Spartan - 6 Starter
Kits.
Mr. Mayank Kumar
B.Tech, M.Tech (DTU), PhD Pursuing.
Area of interest: Analog signal processing, VLSI Design
Embedded system design lab
The Embedded Systems Design Laboratory is research laboratory for robotics and automated
system design. The research activities in the Embedded design lab mainly focus on the process of
designing robotic machines, UAV (unmanned aerial vehicle), battery cars solar cars etc. The
scholar works with different programming tools to program the controller both in C and in
assembly. Hardware equipment includes 8051, ARM 7, ARM9 controllers, universal boards etc.
FPGA development kits from Xilinx and Xilinx ISE Foundation Software and Spartan - 6 Starter
Kits.
Faculty in-charge of lab:
Dr. Gnana Jeba Das
B.Tech, M.Tech, PhD (ANNA University)
Area of interest: VLSI (Testing), Image processing
Microcontroller/microprocessor Lab
This laboratory is for undergraduate students. This lab course introduces the assembly language
programming of 8085 microprocessor and 8051 microcontroller. It gives a practical training of
interfacing the peripheral devices with the 8085 microprocessor. The course objective is to
introduce the basic concepts of microprocessor/Microcontroller and to develop in students the
assembly language programming skills and real time applications of Microprocessor as well as
microcontroller. Hardware equipment includes Microprocessor/ Microcontroller Trainer
with LCD Display, USB interface, EPROM Programmer, ADC, DAC & Power Supply.
Faculty inFaculty inFaculty inFaculty in----charge of lab:charge of lab:charge of lab:charge of lab:
Mr. Puneet PanchalMr. Puneet PanchalMr. Puneet PanchalMr. Puneet Panchal
B.Tech, M.Tech (IIT Roorkee)
Area of Interest: Instrument & Control
Digital Design lab
The Digital Design Lab (DD Lab) is for undergraduate students. It is the most important and well
equipped lab of the school of Electrical, Electronics & communication Engineering. This lab is
based on the logics (positive and negative). Here the students verify the performance of the
combinational as well as sequential circuits. Hardware equipments include the Digital Trainer
Kit with Bread Board which provides basic facilities essential for conducting simple
experiments in the laboratory. The system has an onboard facility of four crystal
generated clock output of 1MHz, 100Hz, 10Hz & 1Hz. It has a facility of Single Pulse
Generation by push button switch. Four Seven Segment Display with BCD inputs having
breadboard area facility of 1200 TIE points.
Faculty inFaculty inFaculty inFaculty in----charge of lab:charge of lab:charge of lab:charge of lab:
Dr. Ruqaiya KhanamDr. Ruqaiya KhanamDr. Ruqaiya KhanamDr. Ruqaiya Khanam
B.Tech, M.Tech, PhD(JMI)
Area of Interest: Bio Medical Engineering, VLSI Design
Analog Electronics Lab
This is the experimental laboratory that explores the design, construction, and verifying of
analog electronic circuits. Theory lectures and laboratory experiments investigate the
performance characteristics of diodes, transistors, JFETs, and op-amp. The course provides
opportunity to simulate real-world problems and solutions that involve tradeoffs and the use of
engineering judgment. Engineers from local analog engineering companies come to campus to
help students with their design projects. Hardware equipments include CRO, bread board, ICs,
connecting wires, power supply, function generators etc.
Faculty in-charge of lab:
Mr. Dinesh singh
B.Tech, M.Tech
Area of interest: Electronic devices, Microprocessor/Microcontroller
DSP/ DSP for VLSI
This DSP lab is for undergraduates and DSP for VLSI is for post graduates students introduces
students to DSP design and analysis techniques for post graduates students it will be related to
VLSI. This lab aims at supporting the teaching and research activities in the area of DSP, which
are either currently being. This lab includes the experiments of discrete time signal and systems
in time domain, and frequency domain, sampling and reconstruction of analog signals, signal and
systems representation in complex frequency domain, solution of differential equations using z
transform, computation of Fourier transform and its efficient implementation, Discrete Fourier
transform and Fast Fourier transform, Structure for the implementation of digital filters, FIR
Filter design and IIR Filter Design. This lab is performed on MATLAB tool.
Faculty in-charge of lab:
Mr. Abhilash Gaur
B.Tech, M.Tech (DTU)
Area of Interest: Digital signal Processing
Analog Integrated circuit Lab
This lab is for undergraduates. Analog integrated circuits laboratory is based on the designing of
IC (Op Amp) and passive component based circuit, verification of results on CRO and
calculations of various performance parameters. Experiments include summer, differentiator,
adder, inverting, non inverting amplifier etc. Hardware equipments include CRO, bread board,
ICs, connecting wires, power supply, function generators, passive components etc.
Faculty in-charge of lab:
Mr. Sanjiv Kumar Gupta
B.Tech, M.Tech(DTU)
Area of interest: Analog signal processing, VLSI design
ELECTRICAL MACHINE LAB
Sr.
No.
Lab Name Lab in charge short profile
Lab equipments name
1. Electrical Machine-1 Dr. Lokesh Varshney
Ph.D. (IIT-BHU), M.Tech. (IIT-
BHU),
B.E. (S.G.S.I.T.S, Indore),
Asso. P., SEECE,
Galgotias University, Greater
Noida
1. Open circuit and short circuit test
on single phase transformer.
2. Efficiency and regulation of
single phase transformer by
Sumpner’s back to back test.
3. Efficiency of DC shunt motor by
Swinburne’s test.
4. Speed control of DC motor by
Armature and Field Control.
5. 3-phase to 2-phase conversion
with two single phase
transformers by Scott connection.
6. Load characteristics of DC shunt
generator and plot load voltage
Vs load current.
7. Magnetization characteristics of
DC shunt generator.
8. Load characteristics of DC
compound generator and plot
load voltage Vs load current.
9. Losses and efficiency of DC
machine by Hopkinson’s test.
2 Electrical Machine-2 Dr. Lokesh Varshney
Ph.D. (IIT-BHU), M.Tech. (IIT-
BHU),
B.E. (S.G.S.I.T.S, Indore),
Asso. P., SEECE,
Galgotias University, Greater
Noida
1. Perform no load and blocked
rotor test on a single phase
induction motor.
2. Break test on three phase
induction motor.
3. Determine performance
characteristic of a three phase
squirrel cage induction motor.
4. Load test on three phase squirrel
cage induction motor.
5. No load and blocked rotor test
on three phase induction motor.
6. Separation of no load losses of
three phase induction motor.
7. Perform open and short circuit
test on a 3-phase alternator.
8. Regulation of a three phase
alternator by ZPF and ASA
method.
9. Determination of Xd and Xq of a
Salent pole synchronous
machine.
10. Determine the characteristic of
field current with armature
current of the synchronous
machine.
3 Network Lab
4 Power system Lab
Internet of Things (IoT) Project Lab IoT Project Lab is a research platform exploring the potential of sensors and Internet of Things for
multidisciplinary research with more end-user interactions. It gives the power to the students to be at the
core of the research and innovation process.
Lab In-charge: Mr. Sarvesh Kumar Sharma
Mr. Sarvesh Kumar Sharma
Education: Mr. Sarvesh Kumar Sharma received the Masters of Engineering in
CommunicationEngineering from Birla Institute of Technology and Science, Pilani, Rajasthan, India, in
2009. Heobtained his Bachelor of Engineering in Electronics and Communication Engineering from
SantLongowal Institute of Engineering and Technology, Longowal, Punjab, in 2006. He has
completedDiploma in Elecgtronics and Communication Engneering from Sant Longowal Institute
ofEngineering and Technology, Longowal, Punjab, in 2003.
Research Area’s: His research interests include technologies in Internet of Things (IoT), wireless adhoc
and sensors networks and Human to Machine (H2M) communications. He has developed
LargeVocabulary Hindi Automatic Speech Recognition for non-Native Hindi Speaker at Intel
IndiaTechnology Limited, Bangalore. He has completed the project on Implementation of
SoftwareDefined Radio using OFDM technology during his post-graduation at BITS-Pilani.
Lab Equipment’s
Standard Practical Kit Details
Raspberry Pi 3 Kit Rasbperry Pi 3
LCD 16*2
MCP 3208
Ultrasonic Module
PIR Motion Sensor
LDR
LM 35
Robotic Chassis
Buzzer & Seven Segment display
LED RGB
Resistors
Breadboard
Connecting w ire
T Cobbler + Cable
Arduino Kit Arduino Uno with Cable
LCD 16*2
LED RGB
Resistors
Breadboard
Connecting w ire
Buzzer & Seven Segment display
Beagle Bone Kit Beagle Bone black
Pow erAdap
Breadboard LED RGB
Connecting w ire
Laboratory Photographs:
Mr. Sarvesh Kumar Sharma
PC- ECE(IoT)
Dr. SibaramKhara
Dean-SEECE.