Download - Ac500eco getting started v2.1.0
ABB Automation products | 2
ABB Automation products | 3
Status LED DisplayCPU Operation and onboard I/O status
Run / Stop SwitchControl CPU operation
Ethernet CPU (In selected models)With RJ45 Port
COM1Online access, Modbus RTU master/slave, CS31-Bus master, ACSII
Integrated onboard I/OConvenient cost effective solution
ABB Automation products | 4
ABB Automation products | 5
Click on “Documentation”
Opens new window
Choose “AC500 +CoDeSys”
ABB Automation products | 6
Select “Index” Type “PM564-T-ETH”and press ENTER
Select “open”
ABB Automation products | 7
WorkspaceTool Bar
MessageWindow
Menu Bar
ObjectOrganizer
ABB Automation products | 8
ABB Automation products | 9
ABB Automation products | 10
ABB Automation products | 11
ABB Automation products | 12
By default
ABB Automation products | 13
If Internet access is existing CBP shows by default ABB homepage
ABB Automation products | 14
3
2
1 Choose the type of CPU
Select “OK” to start.
1To create IO variable for the CPU, go to expand OBIO and then double click on the IO (Onboard IOs) selection
The IO tab will be open on your right window with 2 child tabs. The 1st tab is IO configuration, Click on the 2nd tab for IO Mapping
2Select where do you want to store the project
ABB Automation products | 15
Double click on the cell and give the name of the IOs as shown.
Double click on the cell and give the name of the IOs as shown.
Click on I/O mapping tab
Click to expand.
Click to expand.
ABB Automation products | 16
ABB Automation products | 17
ABB Automation products | 18
2. Click on the BOX icon
1. Click this field
ABB Automation products | 19
Select “???”, and press F2, the Input assistant window below will appear
ABB Automation products | 20
Right click here and select “Assign”
ABB Automation products | 21
ABB Automation products | 22
ABB Automation products | 23
ABB Automation products | 24
ABB Automation products | 25
-
-
ABB Automation products | 26
Select Local Area Connection
Choose “Properties”Select “Internet Protocol Version 4 (TCP/IPv4)”
Key in your desired IP address and subnet mask then click “OK”
1
2 3
4
ABB Automation products | 27
Enter now the new IP address, subnet mask and standard gateway here
Activate “Force IP settings”
1
2
3
ABB Automation products | 28
Choose “Online”
Select “Communication Parameters”
Select “Gateway”
Choose “Local”
ABB Automation products | 29
Select “New”
Define a name for the connection
Select driver “TCP/IP” then click
“OK”
Enter the new parameters:
IP address: xx.xx.xx.xxPort: 1201Motorola byte order: Yes
Then press “ENTER” and “OK”
ABB Automation products | 30
Click on Windows Start Button
Click on “Control Panel”
1
2
ABB Automation products | 31
Select “Online”
ABB Automation products | 32
Define a name for the connection
Select driver “Serial” then click “OK”
Select “Gateway”
Click “New”
Choose “Local”
Choose “Communication Parameters”
ABB Automation products | 33
Select “Online”
Enter the new parameters:
Port: COM number in PCBaudrate: 19200Parity: NoStop bits: 1Motorola byte order: YesFlow Control: Off
Then press “ENTER” and “OK”
ABB Automation products | 34
ABB Automation products | 35
Double click on the FALSE state, you will see a blue indication of “TRUE” on the right. This information indicates that you want to set the value to TRUE.
ABB Automation products | 36
ABB Automation products | 37
ABB Automation products | 38
ABB Automation products | 39
Click “Visualization”
ABB Automation products | 40
Click icon
ABB Automation products | 41
To put the variable, put your cursor in the blank and press F2
ABB Automation products | 42
Similarly, press F2 to bring up the Input Assistant
ABB Automation products | 43
Click icon
To bring up the Input Assistant, put your cursor in the blank and press F2, then choose the desired variables from the list.
ABB Automation products | 44
ABB Automation products | 45
ABB Automation products | 46
Type here
ABB Automation products | 47
Click on “Project”
Click on “Options”
Click on “Desktop”
Select the preferred language
Click “OK”
1
2
3
4
5
ABB Automation products | 48
ABB Automation products | 49
ABB Automation products | 50
Right click on AC500 and select “Create Config”
ABB Automation products | 51
Click icon
Click icon
ABB Automation products | 52
Uncheck this box to view the different function blocks in alphabetical order.
ABB Automation products | 53
Click icon
ABB Automation products | 54
Click icon
ABB Automation products | 55
Set Coil
Reset Coil
Parallel Contact
ABB Automation products | 56
ABB Automation products | 57
Click on “Diagshow all”
Click on “PLC Browser”
Click on “Resource Tab”1
2
3
ABB Automation products | 58
ABB Automation products | 59
ABB Automation products | 60
Note: