Full file at http://testbankshop.eu/Accounting-for-Decision-Making-and-Control-8th-
Edition-Zimmerman-Solution-Manual
Link full download: https://getbooksolutions.com/download/accounting-for-decision-
making-and-control-8th-edition
Instructor’s Manual to accompany
ACCOUNTING FOR DECISION MAKING
& CONTROL
EIGHTH EDITION
JEROLD L. ZIMMERMAN
WILLIAM E. SIMON GRADUATE SCHOOL
OF BUSINESS ADMINISTRATION
UNIVERSITY OF ROCHESTER
© 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized
For sale or distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Front Matter
ii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
CONTENTS
PREFACE ii
PART I: USING THE TEXT
Suggested Course Outlines iii
Chapter Teaching Suggestions vii
Suggested Assignment Problems & Cases xxv
Alphabetical Listing of Problems and Cases xxxiii
PART II: SOLUTIONS TO PROBLEMS AND CASES
1. Introduction 1-1
2. The Nature of Costs 2-1
3. Opportunity Cost of Capital and Capital Budgeting 3-1
4. Organizational Architecture 4-1
5. Responsibility Accounting and Transfer Pricing 5-1
6. Budgeting 6-1
7. Cost Allocation: Theory 7-1
8. Cost Allocation: Practices 8-1
9. Absorption Cost Systems 9-1
10. Criticisms of Absorption Cost Systems: Incentive to Over-produce 10-1
11. Criticisms of Absorption Cost Systems: Inaccurate Product Costs 11-1
12. Standard Costs: Direct Labor and Materials 12-1
13. Overhead and Marketing Variances 13-1
14. Management Accounting in a Changing Environment 14-1
Front Matter
iii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
PREFACE
This Instructor’s Manual for Accounting for Decision Making & Control contains
three parts. The first part describes how the text can be used in a variety of courses: a
seven week executive MBA, a quarter-length course, and a semester-length course.
Sample class outlines are provided for each type of course. The first part also contains
detailed chapter-by-chapter teaching summaries (including suggested problems and
cases) of how I teach each chapter, what topics to emphasize, and the strategy for
presenting the subject matter. Also included is a classification of the end-of-chapter
problems and cases by level of difficulty and degree of classroom discussion generated,
and an alphabetical index to all problems and cases.
The second part of this Instructor’s Manual contains detailed solutions to the end-
of-chapter problems and cases. Many of these problems developed out of discussions
with students in actual situations at their companies, or are based on my consulting
experience. All of the problems have been used on exams and have been taught in class
several times. However, no amount of prior usage can guarantee that a bright student
will not see a new interpretation or solution. Thought-provoking problems have this
characteristic. I am very interested in receiving feedback on the problems and cases, as
well as the text. Please e-mail me at [email protected].
The third part of this Manual is a test bank, including solutions. Producing good
exam problems and solutions is difficult. Textbook authors are always welcome
recipients and grateful acknowledgers of such material.
Front Matter
iv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
PART I: USING THE TEXT
Suggested Course Outlines
Quarter, Semester, and Executive Courses
Accounting for Decision Making & Control can be used in quarter- and semester-
length introductory MBA managerial accounting courses and 7-8 week executive MBA
courses. The following three tables suggest course outlines for quarter, semester, and
executive MBA courses. None of the outlines cover capital budgeting (Chapter 3).
Quarter-length courses. Table 1 presents a ten-week quarter course. The text
contains too much material to cover it all comfortably in a ten week quarter course.
Chapter 3 on capital budgeting, and all the appendices must be omitted. This allows time
for covering the crucial problems and a few supplemental cases, but limited opportunity
for outside readings.
Semester-length courses. Table 2 presents a thirteen-week semester course. A
semester format gives the instructor added flexibility for covering Chapter 3 on capital
budgeting, appendices, outside readings, additional topics, or cases. Depending on the
instructor’s interest and program demands, the book complements additional topics on
ethics, international examples, new manufacturing advances, quality management, 6
sigma, ABC and ABM, balanced score card, lean manufacturing, etc. These topics fit
naturally toward the end of the course after developing the underlying framework and an
understanding of the evolution of costing systems.
Executive MBA courses. Table 3 presents the outline for a seven-week executive
course. The book works well with executive MBA students. In a seven week, one-day-a-
week setting with three hours of lectures per week, the course is fast paced. Executive
students, having encountered similar situations, find the problems very realistic, and are
especially receptive to integrating the accounting, economics, and organizational aspects
of the material. However, much of the material must be pared back. Delete all of the
appendices, Chapter 3 on capital budgeting, and Chapters 12 and 13 on standard costs
and variances.
Front Matter
v © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
TABLE 1: Ten-Week Quarter Course (Two 90 minute lectures per week)
(No coverage of Material in Appendices)
Class No. Chapter Topic
1 1 Introduction
2 2 Nature of Costs
3 2 Nature of Costs
4 4 Organizational Architecture
5 5 Responsibility Accounting and Transfer Pricing
6 5 Responsibility Accounting and Transfer Pricing
7 6 Budgets and Budgeting
8 6 Budgets and Budgeting
9 7 Cost Allocation: Theory
10 8 Cost Allocation: Practices
11 MIDTERM
12 9 Absorption Cost Systems
13 9 Absorption Cost Systems
14 10 Criticisms of Absorption Cost Systems: Incentive to
Overproduce
15 11 Criticisms of Absorption Cost Systems: Inaccurate Product
Costs
16 12 Standard Costs: Direct Labor and Materials
17 12 Standard Costs: Direct Labor and Materials
18 13 Overhead and Marketing Variances
19 14 Management Accounting in a Changing Environment
20 14 Management Accounting in a Changing Environment
Notes:
Each class can present some of the material in the chapter and cover 2-3 homework problems.
Assigning a longer case every 2-3 weeks also breaks up the pace of the course and allows the students
to apply the concepts to longer, more difficult problems.
This format does not allow much time for outside readings. To read and understand the chapter and
work 2-3 problems requires about 5-6 hours of preparation time per class.
Front Matter
vi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
TABLE 2: Thirteen-Week Semester Course (Two 90 minute lectures per week)
Week Chapter Topic
1 1
2
Introduction
Nature of Costs
2 2
2
Nature of Costs
Appendix: Estimating Fixed and Variable Costs
3 3 Opportunity Cost of Capital and Capital Budgeting
4 4
5
Organizational Architecture
Responsibility Accounting and Transfer Pricing
5 5
6
Responsibility Accounting and Transfer Pricing
Budgets and Budgeting
6 6
7
Budgets and Budgeting
Cost Allocation: Theory
7 7
8
Cost Allocation: Theory
Cost Allocation: Practices
Appendix — Reciprocal Method for Allocating Service
Department Costs
8
9
MIDTERM
Absorption Cost Systems
9 9 Absorption Cost Systems
Appendix — Process Costing
10 10
11
Criticisms of Absorption Cost Systems: Incentive to Overproduce
Criticisms of Absorption Cost Systems: Inaccurate Product Costs
11 12 Standard Costs: Direct Labor and Materials
12 13 Overhead and Marketing Variances
Outside readings & cases (new manufacturing systems, ABC,
Target costing, etc.)
13 14 Management Accounting in a Changing Environment
Outside readings & cases (new manufacturing systems, TQM, JIT,
ABM, etc.)
Notes:
Each class can present some of the material in the chapter and cover 2-3 homework problems.
Assigning a longer case to be handed in every 2-3 weeks also breaks up the pace of the course and allows the
students to apply the concepts to longer, more difficult problems.
The semester format allows time for outside readings to supplement the text. Chapter 3 on capital budgeting
is not covered, Chapter 14 can be increased to two weeks and a capstone case added..
Front Matter
vii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
TABLE 3: Seven-Week Executive MBA Course (3 hours of lecture per week)
(No coverage of Material in Appendices)
Week Chapter Topic
1 1
2
Introduction
Nature of Costs
2 4
5
Organizational Architecture
Responsibility Accounting and Transfer Pricing
3 6 Budgets and Budgeting
4 7
8
Cost Allocation: Theory
Cost Allocation: Practices
5 9 Absorption Cost Systems
6 10
11
Criticisms of Absorption Cost Systems: Incentive to
Overproduce
Criticisms of Absorption Cost Systems: Inaccurate Product
Costs
7 14 Management Accounting in a Changing Environment
Notes:
The fast paced coverage of the material works especially well with executives, most of whom have
confronted work situations similar to the assignments. They relate quite well to the end-of-chapter
material and there are usually lively class discussions. In fact, many of the problems in the text
resulted from discussions with executive students outside of class describing a job experience. This
course works best if the students have had a microeconomics course.
There is no midterm exam.
This format requires that the appendices be omitted. If it is necessary to cover standard costs and
variances, assign Chapter 12 on direct labor and material standards. Standard costs can be added to
the first half of lecture number 7.
Very little outside reading should be used unless it is optional. Reading the chapters and working a
few homework problems each week will quickly consume the student’s available study time.
Front Matter
viii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Chapter Teaching Suggestions
My teaching approach is to require the students not only to read the assigned
chapter, but also to prepare and submit a few problems at the beginning of class. This not
only provides a foundation for constructive class discussion, but also ensures that
students do not fall behind.
Throughout the course I emphasize that students of managerial accounting will
develop the very valuable skill of knowing how to take a diverse set of facts and figures
and reduce them to a cogent financial analysis. They will become more skilled in
constructing spreadsheets and doing financial analysis. I remind them of the oft-heard
analogy, ―Accounting is the language of business.‖ Developing the understanding of
accounting and how to communicate via financial analysis is akin to learning a foreign
language, and similarly requires constant practice. The daily assignments provide this
discipline.
Chapter 1. Introduction
Chapter 1 summarizes the course and contains a number of important concepts,
including: internal versus external accounting; the trade-off between using the accounting
system for decision making versus using it for control; single versus multiple accounting
systems; the role of the controller; and economic Darwinism.
A good way to begin the first lecture is to hand out a copy of the Vortec problem
statement (Chapter 1, section F) and give the students five minutes to sketch out the
solution. Then ask them, how many would accept the special order? This is a good way
to generate class discussion the first day. By following the text’s analysis of Vortec in
Chapter 1, several questions naturally arise, including:
• What additional information is required?
• What is the difference between variable and average costs?
• How do the incentives of various managers to accept the order differ?
Vortec is a good ice breaker which allows the students to see that the accounting costs are
being used for a variety of purposes; in particular, they are being used for both decision
making and control. Since the trade-off between decision making and control is an
important organizing feature of the text, it is useful to introduce this key pedagogy early
in the course. (Point out that Chapter 2 elaborates on decision making and Chapters 4
and 5 describe the general issues involving control.)
I also like to reinforce the multiple roles of accounting using Figure 1-1. Finally,
it is important to spend a few minutes discussing the importance of Economic
Darwinism. Many of the topics we discuss (cost allocations, budgeting, product costing)
have survived in competitive industries for long periods of time. For the average firm,
these accounting procedures must be yielding benefits at least as large as their costs. This
does not mean that these procedures are cost beneficial for every firm. Nor does it mean
Front Matter
ix © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
that these accounting systems operate at zero costs (including the costs of dysfunctional
decision making).
Chapter 2. The Nature of Costs
I begin this lecture by defining opportunity costs, ―The sacrifice forgone from a
specific decision.‖ Students find this definition too abstract to have much meaning. Plan
on spending 20 - 30 minutes giving examples and working through text problems. A
good example to use to illustrate opportunity costs is: ―How do you decide what to do
this Saturday night?‖ First you think about the opportunities (movie, concert, watching
TV, studying managerial accounting). (The last gets a good laugh.) Then you think
about what you give up if you do a particular activity. You forgo cash in some cases as
well as the opportunity to do something else. If your managerial accounting final exam is
on Monday, going to a concert precludes studying for the final. If you fail the final and
have to repeat the course in the summer, this can impose large costs, especially if you are
unable to get a good summer internship. This simple example illustrates all the key
points of opportunity costs:
• opportunity costs involve both pecuniary and non-pecuniary considerations,
• opportunity costs are forward looking,
• opportunity costs vary with the opportunity set (e.g., which movies are
playing and when assignments are due).
Two problems in the text are very good at driving home the concept of
opportunity costs:
P2-9 Emrich Processing
P2-26 Eastern University Parking
Emrich (P2-9) always generates a 15 minute discussion. Ask the students what
cost of the remaining acid should be considered in setting the price for the new contract.
Possible answers will be $700, $500, $0, and -$400. The correct answer is -$400. In this
case opportunity costs are negative because the firm can avoid the disposal costs. This
then leads into a question of what price to charge. Since we don’t know the customer’s
demand curve, we can’t set a price, but the discussion helps illustrate the relation between
costs and pricing (a point that arises throughout the course). Appendix A discusses the
relation between costs and pricing.
Eastern University Parking (P2-26) can generate as much as 20 to 30 minutes of
discussion. Parking is a universal problem on all campuses, and hence, this problem hits
a strong emotional nerve. Most students initially overlook the opportunity cost of land in
setting the parking fees and will discuss other problems with the parking system for five
minutes or so before someone hits on the problem of how land is being valued. It isn’t.
And this creates the bias towards surface lots. Once everyone understands this, then ask,
―Why has the University systematically priced its land at zero?‖ ―Are the administrators
dumb?‖ Most students are willing to stop here and say yes. But prompt them by asking,
Front Matter
x © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
―What are the organizational consequences of including land costs in parking fees?‖ The
solution describes the organizational issues. This problem illustrates dramatically how
accounting costs have both decision making and organizational implications.
Mastich Counters (P2-28) is a great problem for student discussion, especially for
executive students because it involves primarily a human resources question that they
have all encountered – should firms adopt a take-it or lose-it policy for vacation accruals?
At this point I usually compare opportunity and accounting costs. The key point
is that most accounting costs are historical in nature and hence backward-, not forward-
looking.
The final point to emphasize is that estimating opportunity costs is itself a costly
process. Much analysis is usually required to define the opportunity set and to estimate
the benefits forgone from each alternative. Because opportunity costs are costly to
estimate, proxies are often used, such as accounting costs.
After introducing opportunity costs, I spend the rest of the time on cost variability
and review total, average, fixed, variable, and marginal costs. Students will remember
these terms from their economics course, and are reassured when told that we simplify
the economics treatment by assuming cost curves are straight lines, thus eliminating
derivatives from this course. This discussion is very important because it is one of the
first times in the curriculum that two courses are integrated with and build on each other.
A good break-even problem is Amy’s Boards (P2-44), which illustrates that the
snow boards are a variable cost before they are purchased, but become a fixed cost once
purchased. In later chapters, students have difficulty knowing how to handle fixed costs.
Amy’s Boards provides a simple, intuitive example of how fixed costs arise from making
the capacity decision.
Another good problem, especially if the students have had a finance course is
Candice (P2-34). It is a simple breakeven problem whether the question asks to find the
breakeven of two alternative technologies, one has high fixed costs and low variable costs
and the other technology is the opposite. To select the optimum technology depends on
expected volume, which is not given. So the first punch line is the optimum technology
is based on profit maximization, not breakeven. The second punch line is that the firm’s
operating leverage arises from prior firm-value-maximizing decisions.
Front Matter
xi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Recommended Problem Assignment 2-8 Taylor Chemicals
2-9 Emrich Processing
2-14 Home Auto Parts
2-17 Easton Diagnostics
2-22 iGen3
2-25 Oppenheimer Visuals
2-26 Eastern University Parking
2-28 Mastich Counters
2-31 News.com
2-34 Candice
2-41 Happy Feet
2-42 Digital Convert
2-43 APC Electronics
2-44 Amy’s Boards
Case 2-1 Old Turkey Mash
Chapter 3. Opportunity Cost of Capital and Capital Budgeting
This chapter is a fairly traditional treatment of capital budgeting. It can be
omitted without interrupting the flow of the material, or it can be postponed until later in
the course. The later chapters and problems do not rely on this material. Like other
managerial accounting texts, to simplify the analysis, topics in Chapters 4–14 are treated
as single-period decision problems.
As our students have already taken a basic corporate finance and capital
budgeting course, I do not cover this chapter in my managerial accounting course.
Teaching this chapter depends on the students’ prior exposure to discounting, and the
instructor’s objectives.
Chapter 4. Organizational Architecture
Since Rochester students have had two managerial economics courses that cover
the basic topics in Chapter 4, this chapter largely constitutes a review and is presented in
conjunction with Chapter 5, with Chapter 5 being used to reinforce and illustrate the
general theoretical issues raised in Chapter 4. The key points to emphasize include: the
importance of agency problems: how the organizational architecture can reduce these
problems, and the accounting system as an integral part of the performance evaluation
system in most organizations. I spend a few minutes reviewing the major concepts and
terminology used later in the course:
• Organizational architecture (three-legged stool)
Performance evaluation
Rewards and punishments
Partitioning decision rights
Front Matter
xii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
• Importance of linking decision rights and knowledge
• Administrative devices for the three-legged stool
Separation of decision management and decision control
Initiation - decision management
Ratification - decision control
Implementation - decision management
Monitoring - decision control
Hierarchies
An important question to ask students is ―Where do you get the information for
the initiation, ratification, implementation, and monitoring decisions?‖ They should
understand that initiation and implementation require forward looking information about
opportunity costs, where decision control decisions rely more on historical performance.
In other words, accounting data tends to be more useful for managers who are exercising
decision control rights than for managers exercising decision management rights.
Emphasize that ―one size doesn’t fit all.‖ Accounting data is very useful, but it is more
useful in some situations than in others.
Recommended Problem Assignment 4-5 Voluntary Financial Disclosure
4-11 Formula 409
4-15 Tipping
4-21 Repro Corporation
Case 4-2 Woodhaven Service
Chapter 5. Responsibility Accounting and Transfer Pricing
Chapter 5 illustrates the role of the accounting system in the firm’s organizational
architecture. Two examples are used: performance evaluation of responsibility centers,
and accounting-based transfer pricing.
The first part of the chapter on responsibility accounting is a good example of the
linkage between the assignment of decision rights and performance evaluation. I review
Table 5-1 and point out that evaluating cost centers based on minimizing average cost
does not necessarily maximize firm profits. I also like to spend a few minutes discussing
EVA and asking the question, ―How does EVA differ from residual income?‖ Except for
some measurement refinements in the cost of capital and accounting income, the two are
the same. They differ in that some EVA consultants emphasize linking EVA to
compensation.
The second topic of the chapter is transfer pricing. Traditional managerial
accounting courses cover transfer pricing towards the end of the course. I believe it is
best covered at the beginning as part of the topic of organizational architecture. Cost
allocations and cost recharges pervade all organizations. To understand the incentive
Front Matter
xiii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
issues of cost allocations, the general topic of transfer pricing provides an underlying
theoretical foundation for cost allocations in general.
I do not lecture extensively on transfer pricing. Our students have had the
economics of transfer pricing in their managerial economics course. Instead, I emphasize
several key points:
• Accounting-based transfer prices are prevalent, even when market prices are
available.
• The ideal transfer price is opportunity cost.
• Transfer pricing is not a zero-sum game, and all transfer pricing methods have
both advantages and disadvantages (no method is best in all situations).
• With variable cost transfer pricing, someone must have the decision rights to
determine which costs are fixed and which costs are variable. Since lower-
level managers usually have more specialized knowledge of the cost behavior
patterns, they can use this knowledge opportunistically to reclassify ―fixed‖
costs as ―variable‖ for calculating the variable cost transfer price. This same
argument also arises again in Chapter 10 when discussing variable costing.
I usually start class with Royal Resort and Casino (Case 5-3) to illustrate the
interdependencies among divisions and how difficult it is for accounting systems to
capture these interdependencies. It is important for students to understand the
conundrum of divisional performance measurement. Firms decentralize to take
advantage of local knowledge. But to provide incentives (and overcome free rider
problems) they create a fiction that the firm can be separated into distinct silos (divisions)
to measure performance. But these silos (and the accounting systems) are unable to
capture and assign the synergies that gave rise to the multiproduct firm.
Next, I spend about 15 minutes reviewing Executive Inns (C5-2). The punch line
here is: ―The devil is in the details.‖ It’s not where you pay for performance, but
precisely how you measure performance. Small changes in the details of the performance
metric can create very different incentives. The remainder of class time is used
discussing assigned problem material. A number of our students are marketing majors,
so Stale-Mart (P5-17) always goes over well in class. XBT Keyboards (P5-24) provides
a good example for demonstrating the incentives of managers operating under a variable
costing transfer pricing rule to outsource those production methods with high fixed costs,
thereby converting them into variable costs. I always assign Celtex (Case 5-1), which is
a shortened and simplified version of the old Birch Paper case. The students never
suggest my solution, which always produces a lively and interesting class discussion.
Front Matter
xiv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Recommended Problem Assignment 5-11 Cogen
5-12 University Lab Testing
5-14 WBG
5-15 CJ Equity Partners
5-17 Stale-Mart
5-19 Flat Images
5-20 Premier Brands
5-23 Transfer Price Company
5-24 XBT Keyboards
5-25 Infantino Toyota
5-27 Serviflow
Case 5-1 Celtex
Case 5-2 Executive Inn
Case 5-3 Royal Resort and Casino
Chapter 6. Budgeting
I begin the topic of budgeting by having the students prepare solutions to Potter-
Bowen (P6-10) and Madden International (P6-24). These problems, drawn from actual
company histories, use their budgeting systems in two very different ways. Potter-
Bowen’s is a top-down decision control system, whereas Madden International’s is a
bottom-up decision management scheme, designed to stimulate the assembly of
specialized knowledge within the firm. These two polar extremes illustrate some key
points:
• Firms make trade-offs involving decision management versus decision control
in designing their budgeting system.
• Budgeting systems, like other parts of the firm’s organizational architecture,
must be matched and coordinated to the other parts of the architecture. There
are complementarities among the various components.
These two problems also highlight the multiple roles served by budgeting systems. I
emphasize that virtually all firms use budgets and that budgeting has survived for
centuries. Thus, budgets are important financial mechanisms used by managers. To help
illustrate what budgets do, use the simple dichotomy of decision management and
decision control. Decision management versus control also helps explain a number of
budgeting phenomena, such as long-term budgets, budget lapsing, line-item budgets, and
zero-based budgets.
A useful feature of this topic is that budgeting may be used to illustrate the ability
of organizational architecture to explain observed institutional practices, such as why
some firms use line item budgets and others do not.
I like to teach the budgeting material right after introducing organizational
architecture because, although not a technically demanding topic, it directly reinforces
Front Matter
xv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
the organizational architecture material and allows some good examples of how to use
the theoretical material in Chapter 4 to analyze actual company practice.
Recommended Problem Assignment 6-5 DMP Consultants
6-7 Golf World
6-8 Coating Department
6-10 Potter-Bowen
6-15 International Telecon
6-17 Panarude Airfreight
6-20 Webb & Drye
6-21 Spa Ariana
6-22 Picture Maker
6-24 Madden International
6-25 Brehm Vineyards
Chapter 7. Cost Allocation: Theory
I begin this chapter by having the students discuss their solutions to the Corporate
Jet problem (P7-4). This is an example from an actual company that quickly piques the
students’ interests in cost allocations. This problem also illustrates quite nicely that cost
allocations are really just questions of transfer pricing. After about 15 minutes of student
discussion, I review the major points from the first part of the chapter: the pervasiveness
of cost allocations and some reasons for allocating costs. Since corporate income taxes
and third-party reimbursements cannot explain the pervasiveness of allocations, issues of
motivation and control must also be important considerations in those cases where taxes
and reimbursement do not apply (e.g., non-profits).
The analysis in this chapter is used to demonstrate how cost allocations can be
used to affect behavior. Reviewing this material requires about 30 minutes of class time.
The isoquants and budget lines in the Appendix are standard topics covered in every
economics text. Using these microeconomic tools in the managerial accounting course
helps to integrate the curriculum for the students. Applying the concepts they learned in
economics reinforces the earlier material and shows them the benefits of how
microeconomic tools can be applied to understand other management practices such as
cost allocations. World Imports (P7-19) is a simple problem that nicely illustrates how
cost allocations can change managers’ operating decisions.
The topic of insulating versus noninsulating allocations again illustrates the inter-
relations between performance measurement and other parts of the firm’s organizational
architecture. For example, a firm might sometimes choose a noninsulating allocation
scheme to foster cooperation. I like to assign Symmetric (P7-29), Avid Pharmaceuticals
(P7-7), Encryption Inc. (P7-12), or Scanners Plus (P7-21) to illustrate how noninsulating
cost allocations induce risk sharing. This discussion works to integrate the finance course
with managerial accounting.
Numerous problems highlight how cost allocation schemes affect behavior. My
favorite problems are listed below. Students find this material very engaging. Plan to
Front Matter
xvi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
spend at least two hours of class time on this chapter, and make sure you assign enough
class time to cover at least four or five problems. I always assign BFR ship Building (P7-
30) because it illustrates that cost-plus pricing in government contracting induces a bias
against outsourcing and Durango Plastics (C7-2) because it nicely illustrates how cost
allocations can distort relative profitability. Finally, continue to stress that cost
allocations represent nothing more than transfer pricing problems.
Recommended Problem Assignment 7-4 Corporate Jet
7-6 Avid Pharmaceuticals
7-7 Wasley
7-8 Hallsite Imaging
7-12 Encryption, Inc.
7-17 Vorma
7-18 Bio Labs
7-19 World Imports
7-20 Painting Department
7-21 Scanners Plus
7-25 Allied Adhesives
7-26 Plastic Chairs
7-27 Woodley Furniture
7-30 BFR Ship Building
Case 7-2 Durango Plastics
Chapter 8. Cost Allocation: Practices
Chapter 8 continues the discussion in Chapter 7, describing some of the practical
problems encountered in cost allocations, including allocating service department costs
and joint costs. In particular, with reciprocal service flows, the actual mechanics of cost
allocation become fairly complicated. I use the allocation of service department costs
(e.g., direct vs. step-down) to illustrate that, no matter how complex the calculations
appear, in the end a transfer price results which can create incentives for managers to
outsource the product or service. In some cases, this can lead to a death spiral. It is
important that students understand the mechanical details of the various service
department cost allocation methods because it builds their confidence that they can
successfully analyze complex algorithms. Ultimately, they must address the joint
questions of: do the resulting cost allocations approximate opportunity costs, and what
incentives are likely created by the allocations?
Next, I discuss joint cost allocations and make the key point that managers can
make profit-maximizing decisions (which joint products to process further and whether to
produce the joint products) without making any joint cost allocations, and hence
allocating joint costs do not add any further information for optimum decision making.
Hence, allocating joint costs are only useful for financial reporting, taxes, and control.
Enzymes (P8-9) illustrates how allocating joint costs can lead to sub-optimum decisions.
Front Matter
xvii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
I spend about 10 minutes of class time having the students discuss and critique
their’ answers to Karsten Mills (P8-20). This is a real company death-spiral example
which demonstrates that there are no simple solutions to many cost allocation/transfer
pricing problems. I end this topic with Carlos Sanguine Winery (Case 8-1). This is
another actual company. Several interesting aspects of this case include:
• This is a joint cost problem that the company did not recognize;
• Allocating grape costs based on gallons was distorting the relative profitability
of the product lines;
• They were about to close a product line because it appeared unprofitable;
• Before they could change accounting systems, they were acquired in an
unfriendly takeover (and my involvement with the firm ended).
Recommended Problem Assignment 8-4 Mystic Herbals
8-9 Enzymes
8-10 Sunder Toys
8-11 WWWeb Marketing
8-14 Vigdor Wood Products
8-15 Advanced Micro Processors
8-19 RBB Brands
8-20 Karsten Mills
8-21 Beckett Manufacturing
8-22 Littleton Medical Center
8-24 Grove City Broadcasting
8-30 IVAX
Case 8-1 Carlos Sanguine Winery
Chapter 9. Absorption Cost Systems
This chapter is a straightforward presentation of a traditional absorption costing
system, focusing on the mechanics of absorption costing and leaving most of the analysis
to the next two chapters. This chapter is kept simple and descriptive to insure that the
students have a thorough grounding and understanding of the mechanics before a detailed
analysis is presented in Chapters 10 and 11.
I like to give the students the ―big picture‖ of the accounting system by presenting
the usual cost flows through the accounts (Figure 9-1). This helps tie the managerial
accounting course back to their financial accounting course. It also demonstrates that all
manufacturing costs eventually flow through to the income statement.
Tables 9-3 and 9-4 on costs and pricing in an oil change outlet is a unique way to
introduce the idea of normal volume and tie it into the pricing decision. This material
again allows the integration of the managerial economics and managerial accounting
Front Matter
xviii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
courses. This example provides a nice vehicle to illustrate how shifts in the demand
curve cause volume and price changes, but as long as marginal cost is constant, prices
should not be raised when demand falls (and average costs rise). Appendix B presents
this material in more rigorous fashion.
I begin the class by reviewing the mechanics for 15 minutes: the job order cost
sheet and cost flows through the accounts (Figure 9-1). I then have the class discuss
Hurst Mats (9-26), which illustrates how focusing on decision management versus
decision control affects the choice of the allocation base to make sure everyone
understands the technical details. The balance of class time is spent having the students
discuss their answers to Pool Scrubbers (P9-5), MacGiver Brass (P9-4), or Welding
Robots (P9-18). MacGiver Brass involves a bank loan decision, which provides the
finance majors with an illustration of the importance of understanding cost accounting.
Welding Robots integrates and reviews a number of key concepts: opportunity costs,
fixed and variable costs, and job order costing.
I do not cover the mechanics of process costing (Appendix A). Most of the
students in the course are non-accounting majors and find the technical aspects of process
costing dull. Instead, I make a few brief remarks that parallel the material in the last
section of the chapter and refer them to Appendix A if they are interested.
Recommended Problem Assignment 9-4 MacGiver Brass
9-5 Pool Scrubbers
9-6 Thermalloy
9-12 Simple Plant
9-18 Welding Robots
9-21 Pebble Beach Sandals
9-26 Hurst Mats
9-28 Amalfi Texts
9-29 Pyramid Products
Chapter 10. Criticisms of Absorption Cost Systems: Incentive to Over-produce
Having introduced the mechanics of absorption costing in Chapter 9, Chapters 10
and 11 analyze these systems. Chapter 10 discusses the incentives to overproduce, which
leads to variable costing. Chapter 11 discusses the assertion that an absorption costing
system inaccurate product costs, which leads to a discussion of activity-based costing.
Both of these chapters increase the students’ understanding of how traditional, absorption
cost systems work.
I begin the class with either Zipp Cards (P10-6) or Medford Mug Company (P10-
10). These problems illustrate the incentive to overproduce under an absorption costing
system. Having made sure everyone understands how overproduction lowers average
cost (as long as marginal cost is not increasing), I then return to the text and review the
numerical example in Tables 10-4 through 10-6. This illustration reintroduces the often
overlooked, important question of who has the decision rights to determine fixed and
variable cost. Managers still have the incentive to overproduce under a variable costing
Front Matter
xix © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
system if, at the end of the year, they can classify cost overruns as variable and thereby
inventory them by overproducing.
The incentive to reclassify fixed costs as variable is also present if a variable cost
transfer pricing method is chosen. This again is another good opportunity to link
absorption costing to transfer pricing. Absorption-based product costs are in fact transfer
prices. Hence, the general theoretical issues discussed under transfer pricing also apply
to absorption costing. Linking the discussion in Chapter 10 back to that in Chapter 5
helps to unify the course and to demonstrate that managerial accounting is not a set of
unrelated computational methods. Kothari Inc. (P 10–11) provides a good example of
how variable cost transfer pricing can create incentives to outsource thereby converting
fixed costs into variable costs.
Transpacific Bank (P10-5) is another good problem for finance majors.
Recommended Problem Assignment 10-4 Zipp Cards
10-5 Transpacific Bank
10-6 Zeflax Bottles
10-8 Aspen View
10-9 CLIC Lighters
10-10 Medford Mug Company
10-11 Kothari Inc.
10-12 Mystic Mugs
10-14 Taylor Chains
10-18 Dim
10-20 Weststar Appliances
10-23 Sants Brake Co.
Case 10-1 Joon
Chapter 11. Criticisms of Absorption Cost Systems: Inaccurate Product Costs
Chapter 11 discusses another criticism of absorption costing systems – inaccurate
product costs. The proposed solution, activity-based costing, is also described. I
introduce this topic by having the students discuss their solutions to several problems
which demonstrate that traditional unit-level allocation bases can produce misleading
product costs. Milan Pasta (P11-4) and Toby Manufacturing (P10-15) are good examples
of miscosting. Having introduced the topic with this example, I spend about 20 minutes
on ABC, describing how it differs from traditional unit-based absorption costing, and its
advantages.
I then ask the students, why haven’t more firms fully implemented ABC? Why
are product costs for performance evaluation still based on unit-level allocations? These
firms have already incurred the cost of calculating ABC product costs. Why don’t more
firms change their performance measures to an ABC system?
The ensuing discussion inevitably raises organizational issues. When you change
the product costing system, some managers are made better off and some are made worse
off, which leads to high influence costs. Some key points that should be made are:
Front Matter
xx © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
• Adopting ABC constitutes a change in performance measures, requiring
compensating changes in the performance reward system in order to keep the
three-legged stool from becoming unbalanced. Tie this point back to Chapter
4.
• Lower-level managers with specialized knowledge of cost drivers must be
given the decision rights over choice of the cost drivers. These decision rights
can be exercised opportunistically.
• Exercising this discretion over choice of cost drivers imposes control costs on
the firm. Usually decision control is harder under ABC than under a more
centrally-managed absorption costing system.
• Again, we see that the decision to use ABC versus absorption costing involves
a trade-off between decision management and decision control. ABC is likely
better for decision management, but worse for decision control. As with
budgeting, a trade-off must be made between decision management and
decision control. Figure 11-4 illustrates there is an optimum number of cost
drivers.
Finally, I end the lecture by discussing Friendly Grocer (P11-9), Sanchez Gadgets
(P11-11), Goodstone Tires (P11-17), or Familia Insurance Company (P11-20). The
marketing majors like these problems. The key point of these problems is that while
ABC may give you a better understanding of your costs, it does not help in understanding
revenues and the interdependencies among demand for various products offered by the
firm. In Friendly Grocer (P11-9), even with ABC, shelf space costs are based on the
historical cost of occupancy. Yet, the opportunity cost of shelf space is not the historical
cost, it is the contribution margin of not stocking some other item and the effect of that
item on the sales of other items stocked. If the grocery store did not stock milk, the sales
of other products would fall. Neither an absorption costing nor an ABC system can
capture these demand-side interdependencies.
SnapOn Fasteners (Case 11-2) is based on the Mueller-Lehmkuhl case, but is
shorter. It contains the essential features of Mueller-Lehmkuhl, but with a very different
solution.
Recommended Problem Assignment 11-4 Milan Pasta
11-6 Astin Car Stereos
11-8 True Cost Manufacturing, Inc.
11-9 Friendly Grocer
11-11 Sanchez Gadgets
11-15 Toby Manufacturing
11-16 Kay Enterprises
11-17 Goodstone Tires
11-20 Familia Insurance Company
Front Matter
xxi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Case 11-2 SnapOn Fasteners
Chapter 12 Standard Costs: Direct Labor and Materials
This chapter describes the mechanics and incentives of standard costs and
variances. To prevent the lecture from becoming overly mechanical and dry, I
continually emphasize the organizational issues and incentive effects of standard cost
variances. I remind the class that agency problems require control mechanisms and that
standard costs provide that control. By splitting the total direct material variance into a
price variance and a quantity variance, the purchasing department is controlled by the
price variance, and the production department is controlled by the quantity variance. But
these are noisy measures of performance. Moreover, there are substantial interaction
effects (externalities) among the various departments. And so while it is important that
students understand the computation of the variances, they should also be able to analyze
the incentive effects of standard costs.
I like to begin the lecture by discussing Great Southern Furniture (P12-15). The
production setting being very intuitive and simple illustrates quite nicely how standards
can be used for decision making (in this case how much to bid on the job) and decision
control (a benchmark to evaluate actual performance). This problem also illustrates how
a time study is used to set standards – a few sets of furniture are assembled and the time
to assemble them is used as the standard.
One of the more interesting issues in standard costing involves determining who
has the decision rights to set and revise the standards and how frequently standards are
revised. This involves the usual trade-off between decision management and decision
control described in Chapter 6 (Budgets and Budgeting). The frequency of standard
revisions also involves trading off decision management and decision control.
One company has the policy, ―We never, never revise the standards, except when
we have to‖ (Changing Standards, P12-6). While this statement sounds silly on the
surface, it really does have content. I use the 1970s example of the Hunt brothers, who
tried to corner the silver market. In less than a year, silver prices roughly tripled. Silver
is a major input to making photographic materials because silver compounds are light
sensitive. If Kodak did not change its standard costs when silver prices tripled, poor
decisions would result. For example, higher silver prices dictate that more resources
should be expended in reclaiming spent silver from manufacturing and film processing.
But managers will only expend more resources in silver reclamation if the standard price
of silver is raised. Thus, the rule, ―We never change our standards, except when we have
to‖ makes sense in the following way. Changing standards involves a trade-off between
decision management and decision control. Frequent standard changes reduce the ability
of a standard cost system to hold managers accountable and reduce the control value of
standard costs. However, if standards are not revised after very large changes,
dysfunctional decision making occurs. Starling Coatings (P12-20) illustrates these
concepts.
Students should understand that standard costs and budgeting are closely related.
To help reinforce this understanding, I use Oaks Auto Supply (P12-4) to introduce the
topic of target costing. After working this problem and discussing target costing in
Front Matter
xxii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
general, I ask the students a couple of questions: With target costing, is the knowledge at
the top or at the bottom of the organization? Is target costing a bottom-up or top-down
system? What about standard costing? How do incentives change with target costing as
opposed to standard costing?
I then refer back to Chapter 6 on budgeting and remind them that some budgeting
processes are top-down and others are bottom-up (participative budgeting). The best
system for the firm is determined by the firm’s goals and other parts of the organizational
architecture. Emphasize that ―one size doesn’t fit all.‖
Covering the mechanics of calculating material and labor variances takes about an
hour of class time. While the students generally understand the formulas after reading
the chapter, a little class review reduces their anxiety level. I like to emphasize that all
material and labor variances are unfavorable, in the sense that they indicate a deviation
from plan. ―Favorable‖ labor and material variances could indicate lower quality
products are being produced.
I usually discuss either AN7-X1 (P12-5) or Zinc Faucets (P12-11) to justify why
price variances are calculated when materials are purchased. This allows timely
reporting of price variances instead of waiting until raw materials enter the manufacturing
process. Hence, price (and wage rate) variances are computed based on actual quantities,
not standard quantities. Since price changes of raw materials are useful data for pricing
and production decisions, the timely reporting of price variances is useful for decision
making, as well as control.
I end the lecture by having the students discuss Domingo Cigars (Case 12-1).
This problem provides a good combination of calculations and analysis of the incentive
effects of the manufacturing process.
Recommended Problem Assignment 12-1 Medical Instruments
12-4 Oaks Auto Supply
12-5 AN7-X1
12-6 Changing Standards
12-8 Smythe and Yves
12-9 Healing Touch
12-11 Zinc Faucets
12-15 Great Southern Furniture
12-16 Cibo Leathers
12-20 Starling Coatings
Case 12-1 Domingo Cigars
Chapter 13. Overhead and Marketing Variances
Chapter 13 illustrates how standard costs and variances can be defined in a variety
of different contexts. The first part of the chapter concludes the calculation of
manufacturing by computing overhead variances introduced in Chapter 12. A simple
three overhead variance structure illustrates most of the substantive issues. I have found
that more complicated four and five fixed and variable overhead variance systems add
Front Matter
xxiii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
few insights to justify the additional computational complexity. The second half of the
chapter describes marketing variances.
I devote some time to discussing standard volume and how it differs from
budgeted and actual volumes, an issue, which requires clarification for most students. I
then spend 15 minutes discussing marketing variances, which marketing majors find
more interesting than the manufacturing variances. I try to cover Chapter 13 in about an
hour of class time.
Recommended Problem Assignment 3-5 Oneida Metal
13-9 Western Sugar
13-10 Soldering Department
13-11 Commando Force
13-14 Turow Trailers
13-18 Ultrasonic
13-20 MRI Department
Chapter 14. Management Accounting in a Changing Environment
Chapter 14 is the most important chapter in the book, providing not only a
conclusion (in contrast to other managerial accounting texts), but also a framework for
understanding how managerial accounting changes in a dynamic world. The chapter also
contains some end-of-chapter problems that review major topics discussed in the book.
I spend at least two hours of class time on Chapter 14. I begin the lecture by
discussing Figure 14-1, a simplified version first introduced in Chapter 1. This important
figure provides a framework that describes:
• How the internal accounting system is part of the firm’s organizational
architecture;
• How the architecture is related to the firm’s business strategy;
• How the firm’s business strategy depends on aspects of the external
environment, such as technology, market competition, and government
regulation.
Figure 14-1 illustrates that the internal accounting system is not isolated from other
policies of the firm. Based on Figure 14-1, several important insights are emphasized:
• Changes in the accounting system rarely occur in a vacuum. Accounting
system changes generally occur at the same time as changes in the firm's
business strategy and other organizational changes, particularly with regard to
the partitioning of decision rights and the performance evaluation and reward
systems.
Front Matter
xxiv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
• Alterations in the firm's organizational architecture, including changes in the
accounting system, are likely a response to changes in the firm's business
strategy caused by external shocks from technology and shifting market
conditions.
• Before implementing an accounting or other organizational change, it is
important to understand what is driving the change.
• An accounting system should not be adopted merely because other firms are
doing so; they may have different external shocks causing their previous
systems to become obsolete.
• An accounting system should not be changed without concurrent, consistent
changes in the way decision rights are partitioned as well as in the
performance reward systems. All three parts of the organization's architecture
must be internally consistent and coordinated.
After describing Figure 14-1, I demonstrate how it applies to various
organizational innovations: total quality management, JIT, 6 sigma and lean
manufacturing, and the balanced score card. An assigned problem for each innovation is
worked in class to ensure the students understand the basics. Then each innovation is
analyzed, including the accounting system changes. For example, Fiedler International
(P14-3) illustrates how balanced scorecards can be gamed as does
Recommended Problem Assignment 14-2 Chateau Napa
14-3 Fiedler International
14-4 Guest Watches
14-8 Software Development, Inc.
14-9 Stirling Acquisition
14-11 Warren City Parts Manufacturing
14-12 Secure Servers Inc.
Case 14-1 Global Oil
Front Matter
xxv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or
distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems & Cases
This table contains a listing of the best problems in each chapter. Problems and
cases are classified as ―basic problems,‖ ―more challenging problems,‖ and ―extensions
to text.‖ Basic problems review the essential material in the text in a straightforward
fashion. More challenging problems go beyond the basic material and require the student
to exercise some judgment and conduct some analysis. These problems are either more
unstructured or require some further application of topics covered in the text. Extensions
to the text are problems that introduce new topics not discussed in the text.
Front Matter
xxvi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems
Chapter Basic Problems More Challenging Problems Extensions to Text
1 Introduction P1-1 MBA Students
P1-2 One Cost System Isn't Enough
P1-4 Using Accounting for Planning
P1-6 Golf Specialties
P1-8 Montana Pen
P1-3 U.S. and Japanese Tax Laws
P1-5 Budgeting
P1-4 Managers Need Accounting
Information
P1-7 Parkview Hospital
Suggested Assignment Problems
Chapter Basic Problems More Challenging Problems Extensions to Text
2 Nature of Costs P2-1 Darien Industries
P2-2 Negative Opportunity Costs
P2-4 Silky Smooth Lotions
P2-5 J. P. Max Dept. Stores
P2-6 Vintage Cellars
P2-7 ETB
P2-8 Taylor Chemicals
P2-15 Measer
P2-16 Affording a Hybrid
P2-19 MedView
P2-20 Manufacturing Cost
Classification
P2-24 Exotic Roses
P2-33 Littleton Imaging
P2-3 NPR
P2-9 Emrich*
P2-10 Gas Prices*
P2-12 Volume and Profits
P2-13 American Cinema
P2-17 Easton Diagnostics
P2-21 Australian Shipping*
P2-22 iGen3
P2-25 Oppenheimer Visuals
P2-26 Eastern University Parking*
P2-29 Optometry Practice
P2-31 News.com
P2-34 Candice Company
P2-35 Mat Machinery
P2-36 Cost Behavior Patterns
P2-37 Royal Holland Line
P2-38 Roberts Machining
P2-39 Doral Rentals
P2-41 Happy Feet
P2-42 Digital Convert
P2-43 APC Electronics
P2-11 Penury Company
P2-14 Home Auto Parts*
P2-18 Spa Salon
P2-23 Adapt, Inc.
P2-27 GRC
P2-28 Mastich Counters*
P2-30 JLE Electronics
P2-32 Kinsley & Sons
P2-40 Fuller Aerosols
P2-44 Amy’s Boards*
P2-45 Blue Sage Mountain
C2-1 Old Turkey Mash*
C2-2 Mowerson Division
C2-3 Puttmaster
*Problem generates much classroom discussion.
Front Matter
xxvii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions to Text
3 Opportunity Cost of
Capital and Capital
Budgeting
P3-1 IRR
P3-2 Accelerated Depreciation
P3-3 Jasper, Inc.
P3-4 Just One, Inc.
P3-7 Northern Sun, Inc.
P3-9 Lottery
P3-10 Mr. Jones’ Retirement
P3-11 NPV vs. Payback
P3-13 New Car
P3-16 South American Mining
P3-17 House Mortgage
P3-19 Toledo Stadium
P3-24 Housing Markets
P3-5 Equity Corp
P3-8 Ab Landlord
P3-12 Clean Tooth
P3-14 National Taxpayers Union
P3-15 Federal Dam Project
P3-18 Flower City Grocery
P3-20 PQR Coal
P3-21 Student Loan Program
P3-22 Geico
P3-25 Mortgage Department
P3-27 Dakota Mining
P3-6 Declining Market, Inc
P3-23 Depreciation Tax Shield
P3-26 Electric Generator
P3-28 Overland Steel
4 Organizational
Architecture
P4-1 Empowerment
P4-2 Pay for Performance
P4-3 Course Packets
P4-4 Allied Van Lines
P4-6 University Physician
Compensation
P4-7 American InterConnect I
P4-9 Vanderschmidt’s
P4-10 Sales Commisions
P4-11 Formula 409
P4-13 Theory X – Theory Y
P4-5 Voluntary Financial Disclosure
P4-12 Pratt & Whitney
P4-14 American InterConnect II
P4-15 Tipping*
P4-16 White’s Department Store
P4-17 Coase Farm
P4-18 Rothwell Inc.
P4-19 Gong-Fen*
P4-8 Raises
P4-20 International Computer Co.
P4-21 Repro Corporation*
C4-1 Christian Children’s Fund
C4-2 Woodhaven Service*
*Problem generates much classroom discussion
Front Matter
xxviii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions to Text
5 Responsibility
Accounting and
Transfer Pricing
P5-1 Canadian Subsidiary
P5-2 Phipps Electronics
P5-3 Sunder Properties
P5-4 Economic Earnings
P5-7 ICB, Intl
P5-9 Microelectronics
P5-15 CJ Equity Partners*
P5-16 Sunstar Appliances
P5-22 Evergreen Nursery and
Landscape
P5-6 Metal Press
P5-11 Cogen
P5-13 Beckett Automotive Group
P5-17 Stale-Mart*
P5-18 R&D Inc.
P5-19 Flat Images
P5-20 Premier Brands
P5-23 Transfer Price Company
P5-25 Infantino Toyota*
P5-27 Serviflow
C5-2 Executive Inn*
P5-5 Performance Technologies
P5-8 Shop and Save*
P5-10 US Copiers*
P5-12 University Lab Testing
P5-14 WBG*
P5-21 Easton Electronics*
P5-24 XBT Keyboards
P5-26 Wujo
C5-1 Celtex*
C5-3 Royal Resort & Casino*
6 Budgeting P6-1 G. Bennett Stewart*
P6-4 Budget Lapsing
P6-5 DMP Consultants
P6-6 Federal Insurance
P6-8 Coating Department
P6-9 Marketing Plan
P6-11 Feder Purchasing Department
P6-12 Access.Com
P6-13 Videx
P6-14 New York Fashions
P6-16 Adrian Power
P6-19 Madigan Modems
P6-28 Troika Toys
P6-2 Investment Banks
P6-7 Golf World*
P6-10 Potter-Bowen*
P6-15 International Telecon*
P6-17 Panrude Airfreight
P6-20 Webb & Drye*
P6-21 Spa Ariana
P6-22 Picture Maker
P6-23 City Hospital Nursing*
P6-25 Brehm Vineyards
P6-27 M&S Mortgage
P6-29 Cellular First
C6-1 Artisans Shirtcraft
P6-3 Ice Storm*
P6-18 Veriplex*
P6-24 Madden International*
P6-26 Republic Insurance*
C6-2 Scion*
*Problem generates much classroom discussion
Front Matter
xxix © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions to Text
7 Cost Allocations:
Theory
P7-1 MRI
P7-2 Fair allocations
P7-7 Wasley
P7-8 Hallsite Imaging
P7-9 Jolsen International
P7-10 Winterton Group
P7-11 National Training Institute
P7-12 Encryption, Inc.*
P7-13 Ball Brothers Purchasing Dept.
P7-14 Telstar Electronics
P7-17 Vorma
P7-19 World Imports
P7-20 Painting Department
P7-26 Plastic Chairs
P7-3 Slawson
P7-4 Corporate Jet*
P7-5 Massey Electronics
P7-6 Avid Pharmaceuticals
P7-16 Fuentes Systems
P7-22 Taylor Connect
P7-23 Economic Experts*
P7-27 Woodley Furniture*
P7-28 Tramsmation
C7-1 Phonetex*
P7-15 Diagnostic Imaging Software
P7-18 Bio Labs*
P7-21 Scanners Plus*
P7-24 Finsys
P7-25 Allied Adhesives
P7-29 Symmertic Inc*
P7-30 BFR Ship Building*
C7-2 Durango Plastics*
8 Cost Allocations:
Practices
P8-2 Outback Opals
P8-3 Rose Hospital
P8-5 Fidelity Bank
P8-6 Joint Products, Inc.
P8-7 Donovan Steel
P8-8 Murray Hill’s Untimely Demise
P8-14 Vigdor Wood Products
P8-22 Littleton Medical Center
P8-23 Aurora Medical Center
P8-25 Barry’s Fashions
P8-28 Columbine Granite
P8-1 Step Down
P8-4 Mystic Herbals
P8-11 WWWeb Marketing*
P8-12 ITI Technology
P8-13 Metro Blood Bank
P8-15 Advanced Micro Processors
P8-16 Jason Rocks
P8-18 Doe Company
P8-19 RBB Brands*
P8-21 Beckett Manufacturing
P8-24 Grove City Broadcasting*
P8-27 Thompson Instruments*
P8-30 IVAX
C8-1 Carlos Sanguine Winery*
P8-9 Enzymes
P8-10 Sunder Toys
P8-17 Ferguson Metals
P8-20 Karsten Mills*
P8-26 Tariffs Inc
P8-29 Jones Consortium*
C8-2 Wyatt Oil*
*Problem generates much classroom discussion
Front Matter
xxx © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions toText
9 Absorption Cost
Systems
P9-1 Equivalent Units (appendix)
P9-2 IPX Packaging
P9-3 Densain Water
P9-5 Pool Scrubbers
P9-6 Thermalloy
P9-7 Lys Wheels
P9-8 Ware Paper Box
P9-9 DeJure Scents
P9-10 Chemtrex (appendix)
P9-11 Media Designs
P9-13 Rick’s Bags
P9-14 Unknown Company
P9-15 Wellington
P9-23 Bartolotta Company
P9-25 Frames, Inc.
P9-4 MacGiver Brass*
P9-12 Simple Plant
P9-16 Advanced Medical
P9-17 Dead Eye Putters
P9-19 DigiEar
P9-20 Specialized Surgical Instrument
P9-22 Jacklin Stampings
P9-24 Kitchen Rite*
P9-27 Mutual Fund Company*
P9-28 Amalfi Texts
P9-30 Magic Floor
P9-18 Welding Robots*
P9-21 Pebble Beach Sandals
P9-26 Hurst Mats*
P9-29 Pyramid Products*
C9-1 Heath Metal Products*
C9-2 Portable Phones, Inc.*
10 Criticisms of
Absorption Cost
Systems: Incentive to
Over-produce
P10-1 Federal Mixing
P10-2 Xerox
P10-3 Varilux
P10-4 Zipp Cards
P10-6 Zeflax Bottles
P10-7 Alliance Tooling
P10-9 CLIC Lighters
P10-10 Medford Mug Company
P10-12 Mystic Mugs
P10-13 Avant Designs
P10-5 TransPacific Bank*
P10-8 Aspen View
P10-11 Kothari Inc.*
P10-14 Taylor Chains
P10-15 Conner Coffees*
P10-16 Kathy’s Mats
P10-18 DIM
P10-21 Blauvelt Products
P10-22 UniCom
P10-23 Sants Brake Co.
P10-17 Navisky
P10-19 Easton Plant
P10-20 Weststar Applicances
C10-1 Joon*
*Problem generates much classroom discussion
Front Matter
xxxi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions to Text
11 Criticisms of
Absorption Cost
Systems: Inaccurate
Product Costs
P11-1 Maui Seminar
P11-2 GAMMA
P11-3 ABC & Volume Changes
P11-4 Milan Pasta
P11-5 Implementing ABC
P11-15 Toby Manufacturing
P11-18 Hospital Admission Office
P11-6 Astin Car Stereos*
P11-7 DVDS
P11-8 True Cost Manufacturing, Inc.*
P11-12 Rextera*
P11-13 CB Medical Technologies
P11-14 Wedig Diagnostics
P11-16 Kay Enterprises
P11-21 Brickley Chains
C11-1 Tilist Golf
C11-3 DynaGolf*
P11-9 Friendly Grocer*
P11-10 Houston Milling
P11-11 Sanchez Gadgets*
P11-17 Goodstone Tires*
P11-19 ABC and Taxes
P11-20 Familia Insurance Company*
C11-2 SnapOn Fasteners*
12 Standard Costs: Direct
Labor and Materials
P12-1 Medical Instruments
P12-2 Mickles Ltd.
P12-5 AN7-X1
P12-6 Changing Standards*
P12-7 Standard Cost Systems
P12-8 Smythe and Yves
P12-9 Healing Touch
P12-10 Marian Health Care System
P12-11 Zinc Faucets
P12-12 Howard Binding
P12-14 Flower City Cartridges
P12-15 Great Southern Furniture
P12-17 Jillian Soups
P12-3 Alexander Products
P12-4 Oaks Auto Supply
P12-13 Fast Fax
P12-16 Cibo Leathers
P12-18 JLT Chemicals
P12-20 Starling Coatings
C12-2 Rust Belt Mufflers*
P12-19 Julene Inc
C12-1 Domingo Cigars*
*Problem generates much classroom discussion
Front Matter
xxxii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
Suggested Assignment Problems (cont.)
Chapter Basic Problems More Challenging Problems Extensions to Text
13 Overhead and
Marketing Variances
P13-1 On-Call
P13-2 Purchasing Department*
P13-4 Logical Solutions
P13-5 Oneida Metal
P13-7 Printers, Inc.
P13-11 Commando Force
P13-12 Wine Distributors
P13-14 Turow Trailers*
P13-16 Artco Planters
P13-17 Shady Tree Manufacturing
P13-18 Ultrasonic
P13-20 MRI Department
P13-3 Spectra Inc.*
P13-6 Beanie Babies
P13-8 Galt Electric Motors
P13-9 Western Sugar*
P13-10 Soldering Department
P13-15 Betterton Corporation
P13-19 Megan Corp.
P13-21 Anpax, Inc.
P13-13 Auden Manufacturing
P13-22 Mopart Division*
C13-1 Lancaster Chamber Orchestra*
14 Management
Accounting in a
Changing Environment
P14-1 British Airways
P14-3 Fiedler International
P14-4 Guest Watches*
P14-6 Old Town Roasters
P14-7 The Pottery Store
P14-10 TQM at Stowbrdidge Div.
P14-2 Chateau Napa
P14-5 Applying TQM in
Manufacturing versus
Administration*
P14-9 Stirling Acquisition*
P14-11 Warren City Parts*
P14-14 Tagway 4000*
P14-8 Software Development, Inc.*
P14-12 Secure Servers Inc.
P14-13 Kollel Hospital*
C14-1 Global Oil*
C14-2 Productivity Measures
*Problem generates much classroom discussion
Front Matter
xxxiii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated,
forwarded, distributed, or posted on a website, in whole or part.
ALPHABETICAL LISTING OF PROBLEMS AND CASES
(H DENOTES HEALTH CARE RELATED PROBLEM; S DENOTES SERVICE INDUSTRY RELATED PROBLEM)
Problem/Case
Title
Chapter/Problem/
Case Number
A
Ab Landlord (S) Ch. 3, P3-8
ABC & Volume Changes Ch. 11, P11-17
ABC and Taxes Ch. 11, P11-3
Accelerated Depreciation Ch. 3, P3-2
Access.Com (S) Ch. 6, P6-12
Adapt, Inc. (S) Ch. 2, P2-23
Adrian Power Ch. 6, P6-16
Advanced Medical (H) Ch. 8, P8-16
Advanced Micro Processors Ch. 2, P2-17
Affording a Hybrid Ch. 12, P12-3
Alexander Products Ch. 10, P10-8
Alliance Tooling C. 7, P7-22
Allied Adhesives Ch. 4, P4-4
Allied Van Lines Ch. 9, P9-27
Amalfi Texts Ch. 2, P2-14
American Cinema (S) Ch. 4, P4-8
American InterConnect I (S) Ch. 4, P4-16
American InterConnect II (S) Ch. 2, P2-44
Amy’s Boards (S) Ch. 12, P12-5
AN7-X1 Ch. 13, P13-22
Anpax, Inc. Ch. 2, P2-43
APC Electronics Ch. 14, P14-5
Applying TQM in Ch. 13, P13-17
Artco Planters Ch. 6, Case 6-1
Artisans Shirtcraft Ch. 10, P10-9
Problem/Case
Case Number
Title Aspen View P10-8
Astin Car Stereos P11-6
Auden Manufacturing P13-13
Aurora Medical Center (H) P8-23
Australian Shipping (S) P2-21
Avant Designs (S) P10-13
Avid Pharmaceuticals (H) P7-6
B
Ball Brothers Purchasing Dept. P7-13
Barry’s Fashions (S) P8-25
Bartolotta Company P9-23
Beanie Babies (S) P13-6
Beckett Automotive Group (S) P5-13
Beckett Manufacturing P8-21
Betterton Corporation P13-15
BFR Ship Building P7-27
Bio Labs (H) P7-18
Blauvelt Products P10-21
Blue Sage Mountain (S) P2-45
Brehm Vineyards P6-25
Brickley Chains P11-21
British Airways (S) P14-1
Budget Lapsing P6-4
Budgeting P1-5
Canadian Subsidiary P5-1
Front Matter
xxxiv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Candice Company P2-34
Carlos Sanguine Winery C8-1
CB Medical Technologies P11-13
Cellular First P6-29
Celtex C5-1
Changing Standards P12-6
Chateau Napa P14-2
Chemtrex (appendix) P9-10
Christian Children’s Fund (S) C4-1
Cibo Leathers P12-16
City Hospital Nursing (H) P6-23
CJ Equity Partners (S) P5-15
Clean Tooth P3-12
CLIC Lighters P10-9
Coase Farm (S) P4-17
Coating Department P6-8
Cogen P5-11
Columbine Granite P8-28
Commando Force (S) P13-11
Conner Coffees P10-15
Corporate Jet (S) P7-4
Cost Behavior Patterns P2-36
Course Packets P4-3
D
Dakota Mining P3-27
Darien Industries P2-1
Dead Eye Putters P9-17
Declining Market, Inc P3-6
DeJure Scents P9-9
Densain Water (S) P9-3
Depreciation Tax Shield P3-23
Diagnostic Imaging Software P7-15
DigiEar (H) P9-19
Digital Convert P2-42
DIM P10-18
DMP Consultants (S) P6-5
Doe Company P8-18
Domingo Cigars C12-1
Donovan Steel P8-7
Doral Rentals (S) P2-39
Durango Plastics C7-2
DVDS P11-7
DynaGolf C11-3
E
Eastern University Parking (S) P2-26
Easton Diagnostics P2-17
Easton Electronics P5-21
Easton Plant P10-19
Economic Earnings P5-4
Electric Generator P3-26
Empowerment P4-1
Emrich (S) P2-9
Encryption, Inc. P7-12
Enzymes P8-9
Equity Corp P3-5
Equivalent Units (appendix) P9-1
ETB P2-7
Evergreen Nursery and Landscape (S) P5-22
Executive Inn (S) C5-2
Exotic Roses P2-24
F
Fair allocations P7-2
Familia Insurance Company (S) P11-20
Fast Fax P12-13
Feder Purchasing Department (S) P6-11
Federal Dam Project P3-15
Federal Insurance (S) P6-6
Federal Mixing P10-1
Ferguson Metals P8-17
Front Matter
xxxv © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Fidelity Bank (S) P8-5
Fiedler International (S) P14-3
FinSys (S) P7-24
Flat Images P5-19
Flower City Cartridges P12-14
Flower City Grocery P3-18
Formula 409 P4-11
Frames, Inc. P9-25
Friendly Grocer (S) P11-9
Fuentes Systems P7-16
Fuller Aerosols P2-40
G
G. Bennett Stewart P6-1
Galt Electric Motors P13-8
GAMMA P11-2
Gas Prices P2-10
Geico P3-22
Global Oil C14-1
Golf Specialties P1-6
Golf World P6-7
Gong-Fen (S) P4-19
Goodstone Tires P11-17
GRC P2-27
Great Southern Furniture (S) P12-15
Grove City Broadcasting (S) P8-24
Guest Watches P14-4
H
Hallsite Imaging P7-8
Happy Feet P2-41
Healing Touch P12-9
Heath Metal Products C9-1
Home Auto Parts P2-14
Hospital Admission Office (H) P11-18
House Mortgage (S) P3-17
Housing Markets P3-24
Houston Milling P11-10
Howard Binding P12-12
Hurst Mats P9-26
I
ICB, Intl (S) P5-7
Ice Storm P6-3
iGen3 P2-22
Implementing ABC P11-5
Infantino Toyota (S) P5-25
International Computer Co. P4-20
International Telecon P6-15
Investment Banks (S) P6-2
IPX Packaging P9-2
IRR P3-1
ITI Technology P8-12
IVAX P8-30
J
J. P. Max Dept. Stores (S) P2-5
Jacklin Stampings P9-22
Jason Rocks P8-16
Jasper, Inc. P3-3
Jillian Soups P12-17
JLE Electronics P2-30
JLT Chemicals P12-18
Joint Products, Inc. P8-6
Jolsen International P7-9
Jones Consortium (S) P8-29
Joon C10-1
Julene Inc P12-19
K
Karsten Mills P8-20
Front Matter
xxxvi © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Kathy’s Mats P10-16
Kay Enterprises P11-16
Kinsley & Sons (S) P2-32
Kitchen Rite P9-24
Kollel Hospital P14-13
Kothari Inc. P10-11
L
Lancaster Chamber Orchestra (S) C13-1
Littleton Imaging P2-33
Littleton Medical Center P8-22
Logical Solutions (S) P13-4
Lottery P3-9
Lys Wheels P9-7
M
M&S Mortgage (S) P6-27
MacGiver Brass P9-4
Madden International P6-24
Madigan Modems P6-19
Magic Floor P9-30
Managers Need Accounting Information P1-4
Manufacturing Cost Classification P2-20
Marian Health Care System (H) P12-10
Marketing Plan P6-9
Massey Electronics P7-5
Mastich Counters P2-28
Mat Machinery P2-35
Maui Seminar P11-1
MBA Students P1-1
Measer P2-15
Medford Mug Company P10-10
Media Designs (S) P9-11
Medical Instruments P12-1
MedView (H) P2-19
Megan Corp. P13-19
Metal Press P5-6
Metro Blood Bank (H) P8-13
Mickles Ltd. P12-2
Microelectronics P5-9
Milan Pasta P11-4
Montana Pen P1-8
Mopart Division P13-22
Mortgage Department (S) P3-25
Mowerson Division C2-2
Mr. Jones’ Retirement P3-10
MRI P7-1
MRI Department P13-20
Murray Hill’s Untimely Demise P8-8
Mutual Fund Company (S) P9-27
Mystic Herbals P8-4
Mystic Mugs P10-12
N
National Taxpayers Union P3-14
National Training Institute (S) P7-11
Navisky P10-17
Negative Opportunity Costs P2-2
New Car P3-13
New York Fashions (S) P6-14
News.com (S) P2-31
Northern Sun, Inc. P3-7
NPR P2-3
NPV vs. Payback P3-11
O
Oaks Auto Supply (S) P12-4
Old Town Roasters (S) P14-6
Old Turkey Mash C2-1
On-Call (S) P13-1
One Cost System Isn't Enough P1-2
Oneida Metal P13-5
Front Matter
xxxvii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Oppenheimer Visuals P2-25
Optometry Practice (H) P2-29
Outback Opals P8-2
Overland Steel P3-28
P
Painting Department P7-20
Panrude Airfreight (S) P6-17
Parkview Hospital P1-7
Pay for Performance P4-2
Pebble Beach Sandals P9-21
Penury Company P2-11
Performance Technologies P5-5
Phipps Electronics P5-2
Phonetex C7-1
Picture Maker P6-22
Plastic Chairs P7-24
Pool Scrubbers P9-5
Portable Phones, Inc. C9-2
Potter-Bowen (S) P6-10
PQR Coal P3-20
Pratt & Whitney P4-12
Premier Brands P5-20
Printers, Inc. P13-7
Productivity Measures C14-2
Purchasing Department P13-2
Puttmaster C2-3
Pyramid Products P9-29
Q
R
R&D Inc. P5-18
Raises P4-8
RBB Brands P8-19
Repro Corporation P4-21
Republic Insurance (S) P6-26
Rextera P11-12
Rick’s Bags P9-13
Roberts Machining P2-38
Rose Hospital P8-3
Rothwell Inc. P4-18
Royal Holland Line (S) P2-37
Royal Resort & Casino (S) C5-3
Rust Belt Mufflers C12-2
S
Sales Commisions P4-10
Sanchez Gadgets (S) P11-11
Sants Brake Co. P10-23
Scanners Plus P7-21
Scion C6-2
Secure Servers Inc. P14-12
Serviflow P5-27
Shady Tree Manufacturing P13-17
Shop and Save (S) P5-8
Silky Smooth Lotions P2-4
Simple Plant P9-12
Slawson P7-3
Smythe and Yves P12-8
SnapOn Fasteners C11-2
Software Development, Inc. (S) P14-8
Soldering Department P13-10
South American Mining P3-16
Spa Ariana (S) P6-21
Spa Salon (S) P2-18
Specialized Surgical Instrument P9-20
Spectra Inc. P13-3
Stale-Mart (S) P5-17
Standard Cost Systems P12-7
Front Matter
xxxviii © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Starling Coatings P12-20
Step Down P8-1
Stirling Acquisition P14-9
Student Loan Program (S) P3-21
Sunder Properties (S) P5-3
Sunder Toys P8-10
Sunstar Appliances P5-16
Symmetric Inc P7-29
T
Tagway 4000 P14-14
Tariffs Inc P8-26
Taylor Chains P10-14
Taylor Chemicals P2-8
Taylor Connect (S) P7-22
Telstar Electronics P7-14
The Pottery Store (S) P14-7
Theory X – Theory Y P4-13
Thermalloy P9-6
Thompson Instruments P8-27
Tilist Golf C11-1
Tipping P4-15
Toby Manufacturing P11-15
Toledo Stadium P3-19
TQM at Stowbrdidge Div. P14-10
Tramsmation P7-26
Transfer Price Company P5-23
TransPacific Bank (S) P10-5
Troika Toys P6-28
True Cost Manufacturing, Inc. P11-8
Turow Trailers P13-14
U
U.S. and Japanese Tax Laws P1-3
Ultrasonic P13-18
UniCom (S) P10-22
University Lab Testing (H) P5-12
University Physician Compensation (H) P4-6
Unknown Company P9-14
US Copiers P5-10
Using Accounting for Planning P1-4
V
Vanderschmidt’s P4-9
Varilux P10-3
Veriplex P6-18
Videx P6-13
Vigdor Wood Products P8-14
Vintage Cellars P2-6
Volume and Profits P2-12
Voluntary Financial Disclosure P4-5
Vorma P7-17
W
Ware Paper Box P9-8
Warren City Parts P14-11
Wasley P7-7
WBG P5-14
Webb & Drye (S) P6-20
Wedig Diagnostics (H) P11-14
Welding Robots P9-18
Wellington P9-15
Western Sugar P13-9
Weststar Applicances P10-20
White’s Department Store (S) P4-16
Wine Distributors (S) P13-12
Winterton Group (S) P7-10
Woodhaven Service (S) C4-2
Woodley Furniture P7-25
World Imports (S) P7-19
Wujo P5-26
WWWeb Marketing (S) P8-11
Front Matter
xxxix © 2014 by McGraw-Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner. This document may not be copied, scanned,
duplicated, forwarded, distributed, or posted on a website, in whole or part.
Wyatt Oil C8-2
X, Y, Z
XBT Keyboards P5-24
Xerox P10-2
Zeflax Bottles P10-6
Zinc Faucets P12-11
Zipp Cards P10-4