\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx
Page 1 of 5
2 West 1st Street, Suite 201, Duluth, Minnesota 55802
tel (218) 727-2626 fax (218) 722-7467
ADDENDUM TWO (2) project Bay Mills Health Center
Brimley, Michigan
project # 018131.00
date August 20, 2020
from Rebecca Lewis DSGW Architects, Inc.
to All planholders for above project
= The following addendum shall become part of the construction documents for the construction of the above referenced project.
This addendum supersedes and supplements all previous reference to similar items.
I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am duly a Licensed
Architect under the laws of the State of Minnesota.
Signature
=
Registration # 1301056849 Date August 30, 2020
general clarifications 1. Prevailing Wage Rates or Davis Bacon rates are NOT required for this project.
2. This project is Tax Exempt for construction materials purchased for the medical center’s construction.
3. Unrestricted Solicitations. If the solicitation is not restricted to Indian-owned (including Indian management of a company) economic enterprises and organizations, award shall be made to the qualified Indian-owned (including Indian management of a company) economic enterprise or organization with the lowest responsive bid, whose bid is not 5% more than the lowest responsive bid and within the maximum total contract price established for the specific project or activity being solicited. If equal low bids are received from qualified Indian-owned (including Indian management of a company) economic enterprise or organizations, award shall be made by drawing lots or similar random method, unless otherwise provided in Tribal or local law. If no responsive bid by a qualified Indian-owned (including Indian management of a company) economic enterprise or organization is within this range, award shall be made to the lowest responsible, responsive bidder.
4. There are no permits required for this project. No City, State or Tribal permitting.
5. Contract terms: Negotiations will be up to the Owner and the Architect, as long as the USDA RD Guidelines are followed.
7. Sovereign Immunity: There will be a partial waiver of sovereign immunity.
8. Items listed as “By Owner” for appliances, and specialty items will be furnished & installed by Owner.
9. General Contractor is responsible for onsite coordination and equipment vendor is responsible for installation of all medical and dental equipment.
10. Composite Wall Panel: Fiber cement siding.
11. Typical Wall Panel: Engineered wood siding.
12. Curved Roof:
a. Radius is indicated on structural sheets.
b. Nailbase on radius can be bent to conform. Alternate means and methods can be reviewed and approved by Architect at time of constructability review.
c. Vapor barrier is direct to deck.
\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx
Page 2 of 5
d. The 3” XPS on the vertical surface can be switched to a standard Poly ISO.
e. The membranes needs to be returned under the ice and water on vertical surface.
13. Office 1027 is being REVISED to a Laundry Room with a washer and dryer. There will be 2 washer hook-ups and 2 power locations for washer & dryer. Washers on the east wall, dryers on the west wall.
14. Pan 1025 door is to be WD-D5.
specifications SECTION DESCRIPTION
00 01 10 TABLE OF CONTENTS 1. ADD the following document to Division 00, following section 00 31 00, above 00
41 00: ------------ Radiation Shielding E
------------ Procurement Policy 2. ADD the following section to Division 00, after Bid Bond:
------------ AIA Document A305 – Contractor’s Qualification Statement 3. ADD the following sections to Division 08, in numerical order:
08 33 26 – Overhead Coiling Grilles 08 36 13 – Sectional Doors
4. OMIT the following section from Division 09: 09 72 00 – Wall Coverings
5. ADD the following Division 13: DIVISION 13 – SPECIAL CONSTRUCTION 13 09 00 – Lead Lined Materials
00 11 13 ADVERTISEMENT FOR BIDS
1. CLARIFICATION: Hard copy bids are to be postmarked August 25, 2020 to the address listed in this specification section, with electronics bids being sent to: Email address TBD (will be issued in Addendum 3, Friday, August 21, 2020) By 1:00 p.m. CST on August 25, 2020.
2. CLARIFICATION: Bids are due at 1:00 p.m. CST and will be publicly opened via a zoom conference call, as per Addendum #1, at 1:00 p.m. CST. It may be a few minutes later.
00 31 00 AVAILABLE PROJECT INFORMATION
1. 1.01: CLARIFICATION: General Contractor is to bid the project as though they will be doing all of the work themselves. If the Owner has the time and laborers to do some of the work themselves, the Owner reserves the right to negotiate that out of the project at that time.
2. 1.04.G: CLARIFICATION: REVISE to read: Bids due printed copies only. 3. 1.05: ADD the following after:
1.06 RADIATION SHIELDING EVALUATION A. Radiation shielding evaluation for the Bay Mills Health Center by Radiation
Physics Consultants, Inc., dated November 27, 2019; appended to this section.
1.07 PROCUREMENT POLICY A. Procurement Policy of Bay Mills Indian Community, Government Grants
and Contracts, adopted August 13, 2018; appended to this section.
---------- RADIATION SHIELDING EVALUATION 1. ADD this document as noted above and included with this addendum.
--------- PROCUREMENT POLICY 1. ADD this document as noted above and included with this addendum.
\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx
Page 3 of 5
--------- CONTRACTOR’S QUALIFICATION STATEMENT
1. ADD AIA Document A305 – 1986, Contractor’s Qualification Statement as included with this addendum.
2. CLARIFICATION: The Owner has requested that the General Contractor’s submitting a bid also complete and submit this AIA Document A305 document.
01 10 00 SUMMARY
1. 1.06.F.6: OMIT all sub-items. No permits are required for this project.
01 40 00 QUALITY REQUIREMENTS 1. CLARIFICATION: Owner is responsible for structural testing per structural sheet
notes only. General Contractor is responsible for all other 3rd party testing:
07 46 46 FIBER CEMENT SIDING 1. 2.02.E: OMIT and REPLACE with “Four custom colors from selected by
Architect.”
08 33 26 OVERHEAD COILING GRILLES 1. ADD this section in its entirety as included with this addendum. 2. CLARIFICATION: Contractor to provide pricing to furnish & install two coiling
counter doors to be power operated switching, location to be determined in the field.
08 36 13 SECTIONAL DOORS
1. ADD this section in its entirety as included with this addendum. 2. CLARIFICATION: Contractor to provide pricing to furnish & install two overhead
coiling doors to be power operated switching, location to be determined in the field.
08 42 29 AUTOMATIC ENTRANCE DOORS
1. 2.01: OMIT in its entirety and replace with the following: 2.01 Manufacturers
A. Sliding Automatic Entrance Door Assemblies: Basis of Design is the AD System: 1. ASSA ABLOY Entrance Solutions; Besam SL500: www.besam-
usa.com 2. Horton Automatics: www.hortondoors.com 3. NABCO Entrances Inc; GT 1175 Whisper Slider:
www.nabcoentrances.com 4. Portable USA; Diva Series: www.portalpusa.com 5. record-usa; 5100 series: www.record-usa.com 6. Substitutions: See Section 01 60 00 – Product Requirements.
08 43 13 ALUMINUM-FRAMED STOREFRONTS 1. 2.01.A.1: OMIT and REPLACE with Kawneer North America Insulclad 500T
thermal entrance. 2. 2.03.A.3: ADD the following after:
4. For systems that are applicable to 2”x6” manufacturers to provide acceptable full thermal framing 2”x6” systems.
3. 2.03.C: OMIT entirely. There are no sunshades on this project.
08 83 00 MIRRORS 1. 1.01.A: ADD the following after:
B. Mirrored eye-glass display.
\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx
Page 4 of 5
2. 2.01.B: ADD the following after: C. Mirrored Eye Glass Display: Standard wall mount swivel mirror to
accommodate open wall mount optical acrylic display to make up a system as shown on drawings. 1. Manufacturers:
a. www.framedisplays.com: DW31-90F Open Wall Mount Acrylic Optical Display with Hardware 47.5” (H) or approved equal.
b. www.framedisplays.com: 15-88-12-20 Standard Wall Mount Swivel Mirrors 55” long, or approved equal.
3. 2.02.A: OMIT “Plastic rosettes” and REPLACE with “Metal Stand-Offs”.
09 72 00 WALL COVERINGS 1. OMIT this section in its entirety.
10 56 26 MOBILE STORAGE SHELVING 1. 2.01.A: ADD the following sentence: Basis of Design Spacesaver single fixed
with 3 back to back carrels, single side operation, manual crank with slab set tracks. Total unit height is 7’, there should be 3 banks to a row, full cap.
13 09 00 LEAD LINED MATERIALS
1. ADD this section in its entirety as included with this addendum.
32 31 16 CHAIN LINK FENCES AND GATES 1. CLARIFICATION: Anchored posts into concrete slab, enclosure to be vinyl
coated with privacy slats. 2. 1.01.C: ADD the following after:
D. Decorative Fence as shown on landscape drawing. 3. 2.01.A: ADD the following after:
B. Decorative Fences: Basis of Design TREX Seclusions. 4. 2.02.B: ADD the following after:
C. Composite board on board privacy fence 6’x8’.
drawings SHEET DESCRIPTION
A2.1 FLOOR PLAN – SOUTH 1. 1/A2.1:
a. OMIT HM-W2 tags at wood windows. CLARIFICATION: See provided Elevations 2 & 3/A7.6, and Detail 21/A7.1 for details.
b. ADD plan note 2 at Rooms 1102 & 1104, as noted in Room Finish Schedule.
A2.2 FLOOR PLAN – NORTH 1. 1/A2.2: OMIT HM-W2 tags at wood windows. CLARIFICATION: See provided
Elevations 2 & 3/A7.6, and Detail 21/A7.1 for details.
A4.1 ROOM FINISH SCHEDULES 1. Room Finish Schedule: REVISE finishes for toilet 1103 to correspond with
finishes shown on Interior Elevations.
A7.3 ENLARGED PLANS & INTERIOR ELEVATIONS - CLINICAL 1. 10, 21 & 22/A7.3: CLARIFICATION: The modular casework system noted in the
exam rooms is not part of this project. It will be done by the Owner outside of this project.
A7.4 ENLARGED PLANS & INTERIOR ELEVATIONS – LAB/OPTICAL
1. 25, 26 & 27/A7.4: OMIT note “Acrylic wall panel mirror 19.5”x55”, and REPLACE with “Standard Wall Mount Swivel Mirror”.
\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx
Page 5 of 5
A7.6 ENLARGED PLANS & INTERIOR ELEVATIONS - REGISTRATION 1. 1/A7.6: ADD elevation marker. 2. 22/A7.6: ADD interior elevation.
Approvals The following manufacturers of materials and equipment are approved for the incorporation into this project based on the information submitted to the Architect/Engineer. The cost of any modifications required to make the materials comply with the Specifications shall be borne by the Contractor/Supplier. Any extra cost of other trades as a result of any of the substituted material shall be borne by the Trade Contractor of material suppliers making these substitutions. The approved substitute materials are subject to final specific submittal review by the Owner or Architect/Engineer
Section Description Approved
08 11 13 HM Doors & Frames Curries
08 42 29 Automatic Entrance Doors Stanley DuraGlide 3000 Series Stanley Magic Force Stanley Dura-Care 7200 Series
10 11 00 Visual Display Boards ASI Visual Display Products
10 21 13.19 Solid Plastic Toilet Compartments ASI Accurate Partitions
10 26 13 Corner Guards Korogard Rub Strips & Corner Guards
10 51 00 Lockers ASI Storage Solutions
10 56 26 Mobile Storage Shelving Spacefile International Corp.
=
ãÉÅÜ~åáÅ~ä==
Åçåëìäí~åí=
EDI-Dolejs, Inc.’s Addendum Two, dated August 20, 2020 is to be included with this addendum as attached (22 page)
=
enclosures J Radiation Shielding Evaluation (18 pages) J Procurement Policy (19 pages) J AIA Document A305 – Contractor’s Qualification Statement (4 pages) J Spec. Section 08 33 26 – Overhead Coiling Grilles (3 pages) J Spec. Section 08 36 13 – Sectional Doors (4 pages) J Spec. Section 13 09 00 – Lead Lined Materials (2 pages) J Architectural Drawing Sheet A2.1, A2.2, A4.1, A7.3, A7.4 and A7.6 (30x42)(6 pages) J EDI-Dolejs Addendum 2 (14 – 8.5x11; 8 – 30x42) (14 pages)
= This addendum shall become part of this bid. The bidder shall insert the addendum number in the space where indicated on the proposal form. Failure to comply may result in the bid being rejected.
= END OF ADDENDUM TWO (2)
Audrey Breakie
Health and Human Service Director
Bay Mills Health Center
Dear Audrey,
We have completed the radiation shielding evaluation for the following facility and equipment.
Facility: Bay Mills Health Center12455 W. Lakeshore Drive
Brimley, MI 49715
This evaluation includes the following equipment:
Radiographic - Room #1039
Mammography Tomosynthesis - Room #1038
Important: This Shielding Evaluation Report MUST remain permanently onsite with the exam room(s)
listed. If the facility is sold, a copy of the report MUST remain with the facility.
Note: On page 4 begins the Shielding Calculations and Information portion of this report that includes a list
(Table of Contents) of each exam room / x-ray unit and the order that they appear in the report. This section
includes a Summary Page for each room followed by at least 1 page of Shielding Calculations and
Information/Reference data. Please refer to each Summary Page for specific shielding Required materials
for each wall/barrier and our (RPC) Recommendations (as we may recommend more shielding materials than
technically required).
This evaluation was conducted using the guidelines in the National Council on Radiation Protection and
Measurement's (NCRP) report 147 entitled "Structural Shielding Design for Medical X‑Ray Imaging Facilities"
and Michigan State X-Ray Regulations. We used room drawings provided to us for the room layout and
equipment location in the room (when available and/or necessary). Any attached room drawings must
accompany all copies of this report.
Refer to the Shielding Calculations and Information section of this report for specific shielding
Requirements and Recommendations for each exam room / radiology unit.
Each exam room has a Summary Page indicating what is Minimally Required and our Recommendations.
Each room also has Shielding Calculations & Information page(s) with details specific to that evaluation.
November 27, 2019
RADIATION PROTECTION
SHIELDING SPECIFICATION
EQUIPMENT SPECIFICATION
ACCEPTANCE TESTING
QUALITY CONTROL
RPC502 East 2nd Street • Radiation Physics • Duluth, MN 55805
RADIATIONPHYSICSCONSULTANTS, INC.
AMOS TARFA, B.S.
Quality Control Specialist
MNSP2134612-616-9899
STEVEN T. NICHOLAS, M.S.
Medical Physicist
ABMP CertifiedMNSP0091
218-786-1025
JEREMY A. HULTEEN, B.A.
Quality Control Specialist
MNSP0089218-786-1028
DAVID J. EASTMAN, M.E.H.S.
Medical Health Physicist
MNSP0088218-786-1026
SHANE MCCOTTER, B.S.
Quality Control Specialist
MNSP2416218-786-1027
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 1
GENERAL NOTES
Shielding of the room shall be constructed so that the protection is not impaired by joints, openings for
ducts, and pipes passing through barriers, conduits, services boxes, etc. embedded in the barriers. The
joints between lead sheets should be constructed so that their surfaces are in contact with an overlap of
not less than ½ inch. Openings in protective barriers from doors, windows, ventilation ducts, and
conduits may require radiation baffles to ensure the required degree of overall protection is maintained.
Windows or doors in any barrier shall meet the shielding requirements for that barrier. Shielding
above 7 feet from the finished floor is not necessary because the height of the x ray sources and of most
individuals is less than 7 feet. Openings in the walls above 7 feet generally will not require radiation
baffles. However, extending shielding to at least 8 feet around any film darkrooms (if the facility has
darkrooms) is recommended because film is regularly stored on shelves above 7 feet.
The shielding specifications presented in this report are based on the equipment assumptions stated
above and the attached copies floor plans (if necessary) showing the location of the equipment in the
room. Any modifications in the equipment, patient workload, occupancy/use of surrounding areas
or room layout (including the location of the equipment in the room) may invalidate this report.
Operator's Booth Requirements (MN Rules 4732.0355 Subpart 4.A-C.):
- It must be allotted no less than 7.5 square feet of unobstructed floor space (the console and generator
may not occupy this space).
- It may be in any geometric configuration provided no dimension is less than 2 feet.
- The booth walls must be permanently fixed barriers at least 7 feet high.
- The booth walls must not be used as a primary radiation barrier. The x-ray beam cannot be directed
at the control booth.
o The control booth operator may not be in the direct path of any scatter radiation from the patient,
x-ray tube, table or wall bucky.
Exposure Button Requirements (MN Rules 4732.0355 Subpart 4.D.):
- The button must be at least 39 inches from any open edge of the control booth wall that leads into the
exam room.
- The button must be fixed (attached so it cannot be moved) within the control booth.
- The button must be placed to allow the operator to use the viewing window or other viewing device
from within the booth.
Viewing Window Requirements (MN Rules 4732.0355 Subpart 4.E.):
- The operator must be able to view the patient during any exposure.
- The operator must have full view of any occupant in the room.
- The operator must be able to view any entry into the room.
- The window must have the same lead equivalence as the surrounding barrier.
- The minimum viewing area must be at least 350 square inches and must be constructed to
assure x-ray operators an unobstructed view of the patient and all room entrances.
- The operator must be able to use the full viewing window (no obstructions).
- The window must be oriented so that the operator's viewing position is at least 18 inches
from the edge of the booth.
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 2
Sincerely,
Radiation Quality Control Specialist
(218) 786-1027
Occupancy Rates:
The following guidelines were used to assign a percentage factor of how often a person occupies the
rooms/areas beyond each barrier (assumes a standard 8 hour shift):
- 1.0 (Full Occupancy or continuously occupied) = control booth, offices, laboratories, adjacent x-ray
rooms, reading/viewing rooms, darkroom, receptionist areas, attended waiting rooms, nurse stations
- 1/2 (0.5) = exam rooms, treatment rooms
- 1/5 (0.2) = corridors, patient rooms, employee lounges, staff restrooms
- 1/20 (0.05) = public restrooms, changing rooms, unattended waiting rooms, unattended vending areas,
storage rooms, outdoor areas with seating, patient holding areas
- 1/40 (0.025) = outdoor areas with only transient pedestrian or vehicular traffic, unattended parking,
attics, stairways, unattended elevators, janitor’s closets, mechanical/boiler rooms
Thank you for allowing us to assist your organization with your radiation shielding needs. Please contact us
if you have any questions on the shielding results. If RPC can help you with any physics services in the
future, such as acceptance testing of your new radiology equipment, please do not hesitate to contact us.
Shane McCotter, B.S.
Weekly Dose Limits:
The areas beyond all barriers, except as described below, are considered "uncontrolled areas" (allowing
public occupants) where the weekly dose limit is 0.02 mSv (2 mrem/wk). The control booth/console and
similar areas where public access is prevented/limited are considered "controlled areas" where the Radiology
Workers are allowed a weekly dose limit of 0.1 mSv (10 mrem/wk).
All occupancy rates and weekly dose limits were assigned using these guidelines and adhere to all Federal
Regulations (10 CFR Part 20.1201 and 1301) and Michigan State Rules - LARA Rules 325.5203.
Post-Construction Shielding Inspection:
The facility must document an inspection of all shielding materials (such as Lead) installed to assure the
room was properly built/shielded. Have the facility manager, architect, contractor or construction crew
perform an inspection using the Post-Construction Shielding Inspection Form included in the Appendix. We
recommend the Contractor perform and sign off on the Inspection form verifying they built the room
properly. Physics (RPC) staff may do an inspection at additional cost (which may require multiple trips).
Shielding Placard:
Included in the Appendix is a blank Shielding Placard (sign) to be filled out and POSTED in the exam
room. The placard must indicate the ACTUAL amount/type of shielding materials physically built
into all barriers of the exam room (walls, windows, doors ceiling and floor). As contractors often install
more/thicker shielding materials than necessary (indicated as Required or Recommended in this report),
verify the placard material information with the contractor and/or architect (such as from Post-Construction
Inspection).
- Minnesota regulations REQUIRE a Shielding Placard to be posted in the room (physically and
permanently attached to the wall) for all new radiology room construction, modification or
installations (MN Rules 4732.0360 Subpart 7).
- Though other states do NOT require a shielding placard be posted, we strongly recommend posting a
placard to help assure that the actual building materials/thicknesses information is not lost (and
helps with any future room changes requiring a new shielding evaluation).
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 3
Shielding Calculations & Information Section
Radiology Room Shielding Evaluation Report
Bay Mills Health Center
Brimley, MI 49715
November 27, 2019
Within this Shielding Calculations & Information Section are specific pages
for each exam room/radiology unit in this report. Each room independently
has a Required/Recommended page followed by a Calculations/Information
page. State regulations require these pages to be included with any copy of
this report (whether printed or digital) AND a copy of this report MUST
remain physically with the building (even if the building is sold).
Exam Rooms/Equipment Included in this Report
Radiographic - Room #1039
Mammography Tomosynthesis - Room #1038
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 4
Summary Page: Radiographic - Room #1039
Table: 95 mA*min/week = (50 patients/week) X (1.9 mA*min/patient)
Wall: 30 mA*min/week = (50 patients/week) X (0.6 mA*min/patient)
Barrier Required Shielding *Recommended
Direction & (Description) Materials / Thickness Shielding Materials Remarks
See Note
A
See Note
A
See Note
A & B
See Note
A
See Note
A & B
See Note
A & C
See Note
A & C
*Though some barriers would suffice with installing thinner amounts of Lead shielding, we
recommend shielding all barriers with a standard 1/16 Inch of Lead to simplify ordering and
assure correct installation/placement. We also recommend installing the same 1/16 Inch of Lead
equivalency in the Control Booth (including the Window) to assure keeping all staff exposures as
low as possible. To adhere to Michigan laws, we also recommend placing a second sheet of 1/16
Inch Lead around wall bucky, 1 foot out in each direction for a total of 1/8 Inch.
North/West-Wall/Window
Floor
Ceiling NA - Distance Alone
Pharmacy
(Control Booth)
(a) This is the total equivalent thickness of shielding required (inherent structural building materials plus
any additional shielding) for the barrier. Lead thicknesses have been rounded up to the nearest
commercially available thickness. Concrete thicknesses are based on a density of 147 lbs/ft3. Less dense
concrete will require thicker barriers to meet the shielding requirements.
(b) The door or window in this barrier shall meet the same shielding requirements as this barrier.
(c) The current / planned building materials consist of 4 inches of Concrete for the Floor and 0.06 inches
of Steel Decking for the Ceiling. The existing/planned materials will adequately shield all spaces above
and below this exam room.
South - Wall
Locker Room
West - Wall/Door
Workload: We used 50 patients per week as a conservative estimate based on patient volumes for this
department. This number was increased from the facility's estimated maximum of 10 patients per week
(considering 5 to 10 years of growth).
North - Wall
Potential Future Office
1/128" Lead
Staff Area
1/16 Inch Lead
1/16 Inch Lead
1/16 Inch Lead
1/16 Inch Lead
East - Wall
Planned Building Materials
(Steel Decking)Shields
(NA - Slab on Grade)
(Roof - Rare Maintenance)
0.774" Plate Glass
NA - Slab on Grade
1/32" Lead
1/128" LEAD -OR-
1/128" Lead - OR -
5/128" Lead
(Equivalent for Window)
NA - Slab on Grade
Wall & Door11.2" Solid Wood
(1/8" Around Wall Bucky)
1/16 Inch Lead
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 5
Radiographic Shielding Calculations & Information
Room: Radiographic - Room #1039 Scale Factors for Include Floor Plans:
Facility: Bay Mills Health Center Exam Room: 1/4" = 1 foot -- (Interior of Exam Room)
Address: 12455 W. Lakeshore Drive Brimley, MI 49715 Department: 1/8" = 1 foot -- (Wider area of building)
Equipment: Radiographic Unit
Reviewer(s): Shane McCotter, B.S.
Date: Workload Used:
Facility Stated:
Table Bucky/Tabletop:Workload for Table Bucky: mA min/week = (1.9 [from Table 4.3] x 50 [patients per week])
= 95.0 mA min/week
Direction - Barrier: North - Wall South - Wall South - Wall South - Wall West - Wall/Door West - Wall/Door East - Wall East - Wall North/West-Wall/Window
Area Beyond Barrier:
Mother's Room (Pot.
Office) Housekeeping Corridor
Locker Room (Potential
Office) Corridor Staff Area Corridor Pharmacy Control Booth
Occupancy Factor: 1 0.05 0.2 1 0.2 1 0.2 1 1
Primary Beam Use Factor: 0.02 0.02 0.02 0.02 0.02 0.02 0.09 0.09 0.00
Weekly Dose Limit: 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week
*Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet)
Dprime 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93
Dscatter 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93
Dleak 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93
(Cross Table Exams)
(No Grid Attenuation)
(Cross Table Exams)
(No Grid Attenuation)
Wall Bucky:Workload for Wall Bucky: mA min/week = (0.6 [from Table 4.3] x 50 [patients per week])
= 30.0 mA min/week
Direction - Barrier: North - Wall South - Wall South - Wall South - Wall West - Wall/Door West - Wall/Door East - Wall East - Wall North/West-Wall/Window
Area Beyond Barrier:
Mother's Room (Pot.
Office) Housekeeping Corridor
Locker Room (Potential
Office) Corridor Staff Area Corridor Pharmacy Control Booth
Occupancy Factor: 1 0.05 0.2 1 0.2 1 0.2 1 1
Primary Beam Use Factor: 0.00 1.00 1.00 1.00 0.00 0.00 0.00 0.00 0.00
Weekly Dose Limit: 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week
*Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet)
Dprime 18.21 8.69 16.81 22.30 7.37 15.04 9.64 15.34 7.94
Dscatter 24.21 2.69 10.81 16.30 7.37 15.04 9.64 15.34 13.94
Dleak 18.21 8.69 16.81 22.30 7.37 15.04 9.64 15.34 7.94
(No Grid Attenuation) (No Grid Attenuation) (No Grid Attenuation)
Required Shielding Thickness per Material:Lead (mm): 0.192 mm 0.566 mm 0.584 mm 0.886 mm 0.127 mm 0.189 mm 0.522 mm 0.583 mm 0.16 mm
Lead (Inches): 1/128 in. 1/32 in. 1/32 in. 5/128 in. 1/128 in. 1/128 in. 1/32 in. 1/32 in. 1/128 in.
Gypsum (Inches): 2.31 in. 6.35 in. 6.52 in. 9.44 in. 1.55 in. 2.26 in. 5.68 in. 6.24 in. 1.89 in.
Concrete (Inches): 0.749 in. 1.98 in. 2.04 in. 2.96 in. 0.524 in. 0.737 in. 1.76 in. 1.94 in. 0.628 in.
Other: Wood (door): 8.62 in Wood (door): 11.2 in Plate Glass: 0.774 in.
**Recommended Shielding Type & Thickness:
Recommended: 1/16" Lead 1/16" Lead1/16" Lead (Wall &
Door)1/16" Lead
1/16" Lead (Wall &
Window)(1/8" Around Wall Bucky
(extended 1 foot on each
side)
Control Booth Window
must meet the same
shielding specification as
the corresponding wall.
Floor / Ceiling:
Direction - Barrier: Floor Ceiling
Area Beyond Barrier: NA - Slab on Grade Roof - Rare Maintenance
Occupancy Factor: 0.025
Primary Beam Use Factor: NA - Slab on Grade 0.00
Weekly Dose Limit: 2 mrem/week
Floor to Floor Distance: 14.5 feet
Known Building Materials: Concrete Steel Decking
Known Material Thickness: 4.00 0.06
*Distance (feet) *Distance (feet)
Dprime NA 11.17 Primary Beam
Use Factors
Dscatter NA 13.50 1.00 (Chest Bucky)
0.89 (Floor)
Dleak NA 11.17 0.09 (Cross-Table Wall)
0.02 (Wall #3)
Required Shielding Amounts per Material: 0.00 (No Primary Use)Lead (mm): 0. mm
Lead (Inches): 0/1 in.
Gypsum (Inches):
Concrete (Inches): . in.
Other: 0.00
Recommended Shielding Type & Thickness:Recommended: Planned 4" Concrete Planned Materials
50 patients/week (conservative estimate)
10 patients/week (max over 10 year growth)
November 27, 2019
Notes:*All measurements are in feet and have had 1 foot added to reach 1 foot beyond barrier.**We recommend shielding all walls with the thickest amount of shielding material required by any one wall to simplify order and assure accurate installation.
This form is used to collect and organize workloads, distance measurements, occupancy factors and weekly dose limits. The ac tual shielding calculations are performed using software XRAYBARR X-ray Shielding Calculation v1.5 by Douglas J. Simpkin.
Floor Below - 10ft Distance Calculation Example:10ft (floor to ceiling height) - 5.58ft (avg. height of human) = 4.42ft (floor surface to person's head below)Rad Tube: 3.28ft (table height) + 3.33ft (overhead tube height) = 6.61ft (used to calculate Rad Dp & Dl)Patient Scatter: 3.28ft (table height) = 3.28ft (used for Rad Dscatter calculation)Rad Tube: Dp & Dl = 4.42ft + 6.61ft = 11.03ft AND Ds = 4.42ft + 3.28ft = 7.7ft
Roof/Ceiling - 10ft Distance Calculation Example:10ft (floor to ceiling height) + 3.28ft (waist height) = 13.28ftRad Tube: 13.28ft - 3.28ft (table height) - 3.33 ft (overhead tube height to table) = 6.67 ft Total Distance for Dp & DlPatient Scatter: 13.28ft - 3.28 ft (table height) - 1 ft (average patient thickness) = 9.0ft for DscatterRad Tube: Dp & Dl = 6.67ft AND Ds = 9.0ft
Note: The same distances are used for both the Table Bucky and Wall Bucky calculations(shorter distance always used for Wall Bucky)
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 6
Summary Page: Mammography Tomosynthesis - Room #1038
Barrier Required Shielding *Recommended
Direction & (Description) Materials / Thickness Materials / Thickness
1Note: Maximum Allowed Patients/Week
North - Control Booth 1/128" Lead Window 1/32" Lead Window Over 1,000
Tech Control
**No Shielding Needed Planned Building Materials Over 1,000
Roof - Rare Maintenance (Distance Alone Suffices) (Steel Decking)
*We recommend installing a standard solid-core wooden door (eg, American Woodwork Institute Type PC5, 43 mm thick).
Floor NA - Slab on Grade NA - Slab on Grade NA
NA - Slab on Grade
*We recommend normal building materials of 1 & ¼” Gypsum (2 X 5/8” Gypsum wallboard – one on each side
of the wall) for all barriers. The West Wall requires the most shielding with a minimum of 0.52 Inches of
Gypsum wall board. However, the exam room Door must be at least 1.45 mm of solid wood to adequately shield
areas beyond (due to another wood door and gypsum wall beyond the exam room door). We recommend
installing a Standard Solid Core Wood Door (43 mm thick) to assure properly shielding, otherwise a steel door
of 1mm would also suffice.
Ceiling
East - Wall 0.36'" Gypsum 1.25" Gypsum 672
Radiographic Room
West - Wall 0.52" Gypsum 1.25" Gypsum 349
Staff Room
Corridor
South - Wall 0.25" Gypsum 1.25" Gypsum Over 1,000
We used 40 pateints per week as a concervative estimate (facility stated max of 16).
Patients/Week
Room Door 1.45 mm Solid Wood (Door) Solid Core Wood Door 103
1Maximum Allowed
Workload: 280 mA*min/week = (40 patients/week) X (7 mA*min/patient)
Based on the attached room drawing, the limiting point of concern is the Solid Core Wood Door at the North of the
room leading to the Corridor (occupancy = 0.2) which is an uncontrolled area 8.67 feet from the mammography
machine. This would limit the maximum number of patients per week to 103 with the indicated/recommended building
materials and machine position.
(a) This is the total equivalent thickness of shielding required (inherent structural building materials plus any additional shielding)
for the barrier. Lead thicknesses have been rounded up to the nearest commercially available thickness. Concrete thicknesses are
based on a density of 147 lbs/ft3. Less dense concrete will require thicker barriers to meet the shielding requirements.
(b) The door or window in this barrier shall meet the same shielding requirements as this barrier.
(c) The current / planned building materials consist of AT LEAST 4 inches of Concrete for the Floor and 0.0598 inches of Steel
Decking for the Ceiling. The existing/planned materials will adequately shield all spaces above and below this exam room.
Corridor
North - Wall 0.11" Gypsum 1.25" Gypsum Over 1,000
Staff Area
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 7
Mammography Shielding Calculations & Information
Room: Mammography Tomosynthesis - Room #1038 Broad Beam Secondary Transmission Function vs Thickness Variables Equations for Max Patients/Week Allowed:
Facility: Bay Mills Health Center α (mm^-1) β (mm^-1) γ beta / alpha Transmission B(x) = ((1+beta/alpha)*e^(alpha*gamma*x)-beta/alpha)^-1/gamma
Address: 12455 W. Lakeshore Drive Brimley, MI 49715 Gypsum 0.0643 0.3709 0.4628 5.7710 (NCRP 147 - Equation A.2 p. 117)
Equipment: Digital Tomographic Mammographic Unit Wood 0.0107 0.0137 0.2387 1.2820 N = number of patients/week
Reviewer(s): Shane McCotter, B.S. Concrete 0.1292 0.6718 0.4475 5.1997 K'= unshielded air kerma per patient at 1m = 0.036 mGy mammography
Date: Lead 15.44 67.38 0.2861 4.3640 P = weekly dose limit in mGy (0.02 mGy/week for uncontrolled area)
Steel 2.956 14.31 0.3706 4.8410
Plate Galss 0.1443 0.7505 0.4603 5.2010
(from table VI, Medical Physics, Vol. 40, No. 6. June 2013 - pg 063901-8)
(used conservative variables for 39 kVp for broad tungsten-anode with silver filter) T = occupancy (1, 1/2, 1/5, 1/8 etc)
Room Plan Scale: 1/4" = 1 foot -- (Interior of Exam Room) d = distance to the point of interest
Department Plan Scale: 1/8" = 1 foot -- (Wider area of building) Unshielded Air Kerma/patient (K'): 0.036 mGy at 1 meter (3.28') - NCRP 147 p. 92 d = d' + a (d'= distance to barrier, a is generally 1 foot for walls)
Unshielded Air Kerma/patient (K'): 0.388 mGy at 1 foot K = K'N/d^2 where d is the distance to the point of interest
Workload: and B = (P/T)/K
mA min/week Solving we get N(d) = ((d^2)*(P/T))/(B*K')
Workload Used: Equation for Shielding Material Thickness:
Facility Stated: Lead Thickness = (1/(α*γ))*Ln[((T^-γ+(β/α))/(1+(β/α))]
(T = Measured Transmission thru UnShielded)
Direction - Barrier:
Barrier Material:
Material Thickness (mm):
Area Beyond Barrier:
Occupancy Factor:
Weekly Dose Limit:
*Known Distance to Barrier:
Weekly Unshielded:
Transmission Required:
Required Gypsum
Required Wood:
Required Plate Glass:
Required Steel:
Required Concrete:
Required Lead:
Required Lead (as Fraction):
Required Shielding:
*Note: All 'Known Distance to Barrier' measurements are made from the KNOWN POSITION x-ray tube/II/patient inside the exam room to the far surface of the barrier/wall. All calculations automatically add 1 foot to achieve assumed position of occupants.
*Note: 'Known Distance to Barrier' may also be a distance outside of the exam room. Example: A 6 foot wide Corridor prevents the distance to an Office beyond the Corridor from being any closer than 6 feet (as measured from exterior surface of exam room wall to interior surface of Office wall).
Maximum Patients per Week Allowed for Known Distances (for indicated workload, distance & shielding materials):
Maximum Patients:
Note: Maximum patients indicates how many patients result in reaching noted Weekly Dose Limit for barrier specifically for the indicated 'Barrier Material / Thickness' AND 'Known Distance to Barrier' (as specified per barrier).
(Without a 'Known Distance to Barrier' entered, the 'Max Patients per Week Allowed' will not be calculated.)
Material Material B(x) Standard Building Materials - Shielding Properties
Thickness Transmission Material Material B(x)
31.75 mm 0.004976 (2 X 5/8") Thickness Transmission
43 mm 0.373313 (Min. tolerance) Steel (20 Ga) 0.0359 inches 0.9119 mm 0.001541 (20 Gauge)
Floor / Ceiling: Concrete (Wall) 1.00 inches 25.40 mm 0.001029 Steel (18 Ga) 0.0478 inches 1.2141 mm 0.000460 (18 Gauge)
Concrete (Floor / Ceiling) Steel (16 Ga) 0.0598 inches 1.5189 mm 0.000152 (16 Gauge)
Direction - Barrier: Floor 4.00 inches 101.6 mm 0.00000003 Plate Glass 0.25 inches 6.35 mm 0.043059
Area Beyond Barrier: Ceiling 0.06 inches 1.5 mm 0.00015202
Occupancy Factor:
Weekly Dose Limit:
Floor to Floor Distance: Max Allowable Patients/week vs. Distance (Reference Charts)Known Building Materials: (Specific for Uncontrolled Areas - 2 mrem Dose Limit)
Known Material Thickness: *All Distances are to the wall surface inside exam room.
**Distance to Barrier:
Weekly Unshielded: Occupancy= 1 0.5 0.2 0.125 1 0.5 0.2 0.125
Transmission Required: Distance (ft)
1 41 83 207 332 1 1 3 4
Required Shielding: 2 93 187 467 747 1 2 6 10
3 166 332 830 1328 2 4 11 18
Maximum Patients per Week Allowed N(d,T): 4 259 519 1297 2075 3 7 17 28
Maximum Patients: 5 373 747 1867 2987 5 10 25 40
6 508 1017 2541 4066 7 14 34 54
Roof/Ceiling - 10ft Distance Calculation Example: 7 664 1328 3319 5311 9 18 44 71
10ft (floor to ceiling height) + 3.28 ft (waist height) = 13.28ft 8 840 1680 4201 6722 11 22 56 90
13.28ft - 6ft (tube height) = 7.28ft Total Distance 9 1037 2075 5187 8299 14 28 69 111
10 1255 2510 6276 10041 17 33 84 134
Floor Below - 10ft Distance Calculation Example: 11 1494 2987 7469 11950 20 40 100 159
10ft (floor to ceiling height) - 5.58ft (avg. height of human) = 4.42ft (height below difference) 12 1753 3506 8765 14025 23 47 117 187
4ft (bucky height) + 2ft (tube to bucky height) = 6ft (used to calculate Dp & Dl) 13 2033 4066 10166 16265 27 54 135 217
4ft (bucky height) (used for Dscatter calculation) 14 2334 4668 11670 18672 31 62 156 249
Dp & Dl = 4.42ft + 6ft = 10.42ft and Ds = 4.42ft + 4ft = 8.42ft 15 2656 5311 13278 21244 35 71 177 283
(P/T)/(B*K')= 111.66 223.31 558.28 893.25 1.49 2.98 7.44 11.91
0.00 inches Steel
NA - Slab on Grade Over 1,000 Patients
0.0028 mGy
7.1622 Max Patients Max Patients
4.00 inches 0.06 inches
11.78 1.25" Gypsum Standard Solid Wood Door (43 mm Wood))
*Example: American Woodwork Institute Type PC5, 43 mm thick
0.02 mGy/week
NA 14.5 feet
Concrete Steel Decking
Floor Ceiling
NA - Slab on Grade Roof - Rare Maintenance
NA - Slab on Grade 0.025
Standard Building
Materials Standard Building
Standard 1.25" Gypsum: Materials
*Standard Solid Wood Door:
103 patients Over 1,000 Patients Over 1,000 Patients Over 1,000 Patients Over 1,000 Patients 349 patients 672 patients Over 1,000 Patients
1/128 in Lead 1/128 in Lead
1.45 mm Wood 0.05 inches Gypsum 0.11 inches Gypsum 0.23 inches Gypsum 0.25 inches Gypsum 0.52 inches Gypsum 0.36 inches Gypsum
1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead
0.0613 mm Lead
0.000 mm Lead 0.006 mm Lead 0.014 mm Lead 0.027 mm Lead 0.029 mm Lead 0.054 mm Lead 0.040 mm Lead 0.061 mm Lead
0.06 inches Concrete 0.84 inches Concrete 1.77 inches Concrete 3.23 inches Concrete 3.53 inches Concrete 6.12 inches Concrete 4.67 inches Concrete 6.81 inches Concrete
0.18 inches Plate Glass 0.29 inches Plate Glass
0.0021 mm Steel 0.0316 mm Steel 0.0696 mm Steel 0.1363 mm Steel 0.1507 mm Steel 0.2916 mm Steel 0.2097 mm Steel
0.00 inches Plate Glass 0.02 inches Plate Glass 0.06 inches Plate Glass 0.11 inches Plate Glass 0.12 inches Plate Glass 0.25 inches Plate Glass
0.3329 mm Steel
1.45 mm Wood 21.38 mm Wood 44.87 mm Wood 82.06 mm Wood 89.55 mm Wood 155.57 mm Wood 118.60 mm Wood 173.05 mm Wood
0.00 inches Gypsum 0.05 inches Gypsum 0.11 inches Gypsum 0.23 inches Gypsum 0.26 inches Gypsum 0.52 inches Gypsum 0.37 inches Gypsum 0.60 inches Gypsum
0.0836 0.03230.9653 0.6033 0.3586 0.1671 0.1444 0.0434
0.021 mGy 0.033 mGy 0.056 mGy 0.120 mGy 0.138 mGy 0.461 mGy 0.239 mGy 0.620 mGy
8.67 feet 8.67 feet 15.67 feet 4.09 feet 9.58 feet 4.80 feet 7.05 feet 4.00 feet
1.000 1.000
0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week
0.125 0.200 1.000 0.200 1.000 1.000
0.02 mGy/week
Corridor Corridor Staff Work Area Corridor Locker Room (Potential Office) Staff Room Radiology Room Control Area
November 27, 2019
= ( 7.0 [from Table 4.3] X 40 [patients per week])
= 280.0 mA min/week
40 patients/week (conservative estimate)
16 patients/week (max over 10 year growth)
Lead - 1/32"
43.00 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 25.40 mm
Solid Wood Door (43 mm) 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum
East - Wall Tech ShieldNorth - Room Door North - Wall North - Wall South - Wall South - Wall West - Wall
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 8
Documents Included in Appendix
Architectural Floor Plans: Exam Room(s) Interior (Equipment Layout)
Post-Construction Shielding Inspection Form
Brimley, MI 49715
November 27, 2019
Within this Appendix are various supporting and reference documents that
MUST be included with any copy of this report (whether printed or digital).
State regulations also require these documents to be included AND a copy of
this report MUST remain physically with the building (even if the building is
sold). Without these documents, future changes in equipment, room
construction/layout or number of exams CANNOT be accurately calculated
and/or compared to the finding in this report.
Shielding Placard: Example & Blank Placard
APPENDIX
Radiology Room Shielding Evaluation Report
Bay Mills Health Center
Architectural Floor Plans: Department / Building
Thickness Conversion Chart: Inches to mm
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Appendix Summary
48"
GFI
48"
GFI
AC
GFI
AC
GFI
GFI
GFI AC
GFI48"GFI
GFI
GFIG
FI
GFI
GFI
GFI AC
GFI
(2)
(2)
ACGFI
(2)
(2)
(2)(2)
(2)
48"GFI
ACGFI
ACGFI
ACGFI
ACGFI
ACGFI
ACGFI
ACGFI
ACGFI
AC
GFI
AC
GFI
AC
GFI
(2)
(2)
(2)(2)
AC AC AC AC(2) (2)(2)AC
(2)AC
(2)AC
(2)AC
GFI
AC
GFI
(2)
(2)
AC
OS
D
SES
SCR
S CRS ES
S
ESS
CR
S
S
W (2)
S
ES S
CR
OS
D
D
ACGFI
ACGFI
D
DD
D
OS
D
D
(2)
(2)
(2)
D D D
4 3
3
PHARMACYWORK1023
DATA1026
LOCKERROOM (44Lockers)
1027
LOCKERROOM (44Lockers)
1028
STAFFBREAKROOM1029
TOILET1033B
TOILET1033A
STAFFMOTHERS
ROOM1031
MAMMO1038
HOUSEKEEPING1030
HALLWAY1025
HALLWAY1024
PHARMACYCONSULT
1021
PHARMACYRETAIL1020A
HALLWAY1004
OUTREACH(CHELSEY)
1019
INSURANCE(SHELLEY)
1018
CHANGE1039A
MOTHERSROOM1009HALLWAY
1007A
TOILET1040
HALL1037
STAFF WORK1037A
WAIT1036
WOMENSTOILET1008
WAITING1007
Hall1006
HALLWAY1034A
RADIOLOGY1039
ÉåêáÅÜ
áåÖ
ÅçããìåáíáÉë
íÜêç
ìÖÜ
~êÅÜ
áíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íï
áå=ÅáíáÉë
ïïïKÇëÖ
ïKÅçã
éêç
àÉÅí=@
Ç~íÉ
êÉîáëáçå=L=áëëìÉ
ëÜÉÉí=åìãÄÉê
çÑ1
0/2
4/2
01
9 9
:46
:40
AM
Ba
y M
ills
Hea
lth
Cen
ter
12
45
5 W
. La
kes
ho
re D
riv
e
Br
imle
y, M
ich
iga
n 4
97
15
01
81
31
.00
1/8
" p
lan
12
1/8" = 1'-0"1
Phy Plan 1/8"
printed on 11" x 17" paper
N
Corridor Occ: 0.2
Staff Area Occ: 1.0
Radiology Occ: 1.0
Corridor Occ: 0.2
Locker Room (Potential Office) Occ: 1.0
Staff Room Occ: 1.0
Corridor Occ: 0.2
Mammo Occ: 1.0
Mother's Room (Potential Office) Occ: 1.0
Waiting Room Occ: 0.05
Pharmacy Occ: 1.0Restroom
Occ: 0.2
Housekeeping Occ: 0.05
Locker Room (Potential Office) Occ: 1.0
7.09 ft
5.49 ft
5.70 ft
ACGFI
GFI
GFI
AC
GFI
(2)
ACGFI
GFI
AC
GFI
(2)
OS
D
D
AC
DD
D
OS
HOUSEKEEPING1030
MAMMO1038
HALL1037
STAFF WORK1037A
HALLWAY1007A
MOTHERSROOM1009
CHANGE1039A
STAFFMOTHERS
ROOM1031
HALLWAY1025
HALLWAY1024
Hall1006
RADIOLOGY1039
13
'-0
"5
'-9
"7
'-1
"2
'-9
"5
'-3
"
11'-5" 14'-6"
8'-
1"
20
'-6
"
7'-8"
5'-5" 9'-1"
shield wall stop at 7'-0" above floor
ÉåêáÅÜ
áåÖ
ÅçããìåáíáÉë
íÜêç
ìÖÜ
~êÅÜ
áíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íï
áå=ÅáíáÉë
ïïïKÇëÖ
ïKÅçã
éêç
àÉÅí=@
Ç~íÉ
êÉîáëáçå=L=áëëìÉ
ëÜÉÉí=åìãÄÉê
çÑ1
0/2
4/2
01
9 9
:46
:41
AM
Ba
y M
ills
Hea
lth
Cen
ter
12
45
5 W
. La
kes
ho
re D
riv
e
Br
imle
y, M
ich
iga
n 4
97
15
01
81
31
.00
1/4
" P
lan
22
1/4" = 1'-0"1
Physicist Plan 1/4"
N
Walls:Green walls: 3 5/8" mtl studs with 5/8" gyp on each side, walls to deck (exception sheild wall in radiology room, see plan)Blue walls: 6" mtl studs with 5/8" gyp on each side, walls to deck
Floor: 4" concrete slab on grade
CeilingAccoustic ceiling tile 9'-6" above finished floorRoof deck is at 14'-6" above finisehd floor, constructed of metal decking with 6" of rigid insulation. no occupied spaces above radiology or on the roof
General Notes: 1) project is all new construction2) Estimated workload:
X-Ray: 2 patients per day, 5 days a week*Mammo: 2-4 patient per day, 4 days a week*
*the clinic hopes to increase workload within a year of opening, double the number to accomodate projected future use.
PROJECT INFORMATIONBay Mills Health Center12455 W. Lakeshore DriveBrimley, Michigan 49715
Clinic Contact:Audrey [email protected]
Design Team Contact:Jessica [email protected]
printed on 11" x 17" paper
4.95 ft10.10 ft
7.90 ft16.88 ft
1.69 ft
6.94 ft
7.67 ft
6.00
ft
8.12
ft
6.37 ft
0.33
ft
8.64 ft
8.93 ft
NO
RT
H0.42 ft
0.42 ft
0.42 ft
4.80 ft 7.05 ft
3.96 ft
NORTH
Thickness Conversion Chart (mm to Inches)
mm Inches Fraction (In) mm Inches Fraction (In)
0.1984 0.0078 1/128
0.3969 0.0156 1/64
0.7938 0.0313 1/32 13.0969 0.5156 33/64
0.9922 0.0391 5/128 13.4938 0.5313 17/32
1.1906 0.0469 3/64 13.8906 0.5469 35/64
1.5875 0.0625 1/16 14.2875 0.5625 9/16
1.9844 0.0781 5/64 14.6844 0.5781 37/64
2.3813 0.0938 3/32 15.0813 0.5938 19/32
2.7781 0.1094 7/64 15.4781 0.6094 39/64
3.1750 0.1250 1/8 15.8750 0.6250 5/8
3.5719 0.1406 9/64 16.2719 0.6406 41/64
3.9688 0.1563 5/32 16.6688 0.6563 21/32
4.3656 0.1719 11/64 17.0656 0.6719 43/64
4.7625 0.1875 3/16 17.4625 0.6875 11/16
5.1594 0.2031 13/64 17.8594 0.7031 45/64
5.5563 0.2188 7/32 18.2563 0.7188 23/32
5.9531 0.2344 15/64 18.6531 0.7344 47/64
6.3500 0.2500 1/4 19.0500 0.7500 3/4
6.7469 0.2656 17/64 19.4469 0.7656 49/64
7.1438 0.2813 9/32 19.8438 0.7813 25/32
7.5406 0.2969 19/64 20.2406 0.7969 51/64
7.9375 0.3125 5/16 20.6375 0.8125 13/16
8.3344 0.3281 21/64 21.0344 0.8281 53/64
8.7313 0.3438 11/32 21.4313 0.8438 27/32
9.1281 0.3594 23/64 21.8281 0.8594 55/64
9.5250 0.3750 3/8 22.2250 0.8750 7/8
9.9219 0.3906 25/64 22.6219 0.8906 57/64
10.3188 0.4063 13/32 23.0188 0.9063 29/32
10.7156 0.4219 27/64 23.4156 0.9219 59/64
11.1125 0.4375 7/16 23.8125 0.9375 15/16
11.5094 0.4531 29/64 24.2094 0.9531 61/64
11.9063 0.4688 15/32 24.6063 0.9688 31/32
12.3031 0.4844 31/64 25.0031 0.9844 63/64
12.7000 0.5000 1/2 25.4000 1.0000 1
(NCRP report #147, Figure 2.3)
Inches Equivalent Weight
(fractions) in mm lbs/ft^2
1/32 0.79 1.85
5/128 1 2.31
3/64 1.19 2.76
1/16 1.58 3.69
5/64 1.98 4.6
3/32 2.38 5.53
1/8 3.17 8
Commercially available Lead sheet
thicknesses and associated weight
USE: This chart converts mm thickness values into the next thickest Inch
equivalent in 1/64 inch increments.
Note: The 1/128" & 5/128" thicknesses are included since these are commercially available Lead thicknesses.
Thickness Thickness
Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report
Post-Construction Shielding Inspection Form
Site Location:
Sites Address:
Room / Location:
Type of X-Ray Equipment Used:
Barrier Minimum Required Recommended
North Wall 1/128" Lead 1/16" Lead
South Wall 5/128" Lead 1/16" Lead
South Wall (1 foot beyond Bucky) 1/8" Lead
West Wall 1/128" Lead 1/16" Lead
East Wall 1/32" Lead 1/16" Lead
Door (West) 11.2" Solid Wood 1/16" Lead
Control Booth Wall (North/West) 1/128" Lead 1/16" Lead
Control Booth Window (North/West) 0.774" Plate Glass 1/16" Lead Equivalent
Ceiling None Planned Steel Sheeting
Floor NA - Slab on Grade Planned 4" Concrete
Note: If this room requires no lead shielding (i.e. only gypsum/sheetrock), please indicate "NA" for items 1 to 3.
1. Was the lead installed up to at least 7' on all required barriers?
Yes No NA
Yes No NA
3. Are all door jams, window edges and wall corners adequately wrapped/covered?
Yes No NA
Who conducted the inspection:
Company & Title of Inspector:
Date of the inspection:
Note: If any of the following questions above is answered "No", than construction should be stopped and no radiographic exposures
*Use this document to help create your permanent placard which states what is actually present.*
Printed Name Signature
2. Are all objects/holes that are cut through the lead in the wall adequately wrapped with an equivalent lead thickness (i.e.
electrical boxes with pliable lead sheets on the back of the electrical box inside the wall, light switches, plumbing)? *This assures no
radiation can leak through any holes cut into the wall.
*In the following list, please indicate what was actually installed into each barrier (circle one of the options below or fill in a
different amount under the Other Thickness & Type section).
Other Thickness & Type
Bay Mills Health Center
12455 W. Lakeshore Drive Brimley, MI 49715
(Street, City, State, Zip Code)
Radiographic - Room #1039
Radiographic Unit
Reason for Post-Construction Inspection: This inspection is to help a site document what was actually installed within all
room barriers.
Copyright (c) 2016 Radiation Physics Consultants, Inc., All rights reserved.
Post-Construction Shielding Inspection Form
Site Location:
Sites Address:
Room / Location:
Type of X-Ray Equipment Used:
Barrier Minimum Required Recommended
North Wall 0.11" Gypsum 1.25" Gypsum
South Wall 0.25" Gypsum 1.25" Gypsum
West Wall 0.52" Gypsum 1.25" Gypsum
East Wall 0.36" Gypsum 1.25" Gypsum
Door (North) 1.45mm Solid Wood 43mm Solid Core Wood Door
Control Booth Wall 1/128" Lead 1/32" Lead
Control Booth Window 1/128" Lead 1/32" Lead
Ceiling None Planned Steel Sheeting
Floor NA - Slab on Grade Planned 4" Concrete
Note: If this room requires no lead shielding (i.e. only gypsum/sheetrock), please indicate "NA" for items 1 to 3.
1. Was the lead installed up to at least 7' on all required barriers?
Yes No NA
Yes No NA
3. Are all door jams, window edges and wall corners adequately wrapped/covered?
Yes No NA
Who conducted the inspection:
Company & Title of Inspector:
Date of the inspection:
Note: If any of the following questions above is answered "No", than construction should be stopped and no radiographic exposures
*Use this document to help create your permanent placard which states what is actually present.*
Printed Name Signature
2. Are all objects/holes that are cut through the lead in the wall adequately wrapped with an equivalent lead thickness (i.e. electrical
boxes with pliable lead sheets on the back of the electrical box inside the wall, light switches, plumbing)? *This assures no radiation can leak
through any holes cut into the wall.
Other Thickness & Type
Bay Mills Health Center
12455 W. Lakeshore Drive Brimley, MI 49715
(Street, City, State, Zip Code)
Mammography Tomosynthesis - Room #1038
Digital Tomographic Mammographic Unit
*In the following list, please indicate what was actually installed into each barrier (circle one of the options below or fill in a different
amount under the Other Thickness & Type section).
Reason for Post-Construction Inspection: This inspection is to help a site document what was actually installed within all room
barriers.
Copyright (c) 2016 Radiation Physics Consultants, Inc., All rights reserved.
Facility:
Address:
Exam Room:
North Wall
East Wall
South Wall
West Wall
Control Booth
Room Door
Floor
Ceiling 3.5 Inches of Solid Concrete
Bay Mills Health Center
12455 W. Lakeshore Drive, Brimley, MI 49715
Radiographic - Room #1039
Shielding Type & Thickness
DO NOT REMOVE - Must Be Post Per State Law
1/16 inch Lead - Wall & Door
5/8" Gypsum (Sheetrock) - Exterior Brick - Window Glass
1.25 Inches Gypsum (5/8" Sheetrock each side of wall)
1/16 inch Lead
1/16 inch Lead - (Wall & Equivalent for Window)
Concrete Slab on Ground
Solid Core Wood Door (43 mm Wood)
*Post this in the exam room as required by MN Rules 4732.0360 Subpart 7.
The type and thickness of radiation shielding materials listed above are the specific amounts permanently and physically cons tructed within the walls and barriers of this exam room.(This may be more than what was recommended by the shielding report).
ALL DOORS, WINDOWS & OTHER BARRIERS MEET THE SAME SHIELDING EQUIVALENCE.
**Must Determine/Verify the Actual Materials/Thickness Physically Installed
in Each Barrier (Use Blank Placard Included). This is an Example ONLY!
Facility:
Address:
Exam Room:
North Wall
East Wall
South Wall
West Wall
Control Booth
Room Door
Floor
Ceiling
Shielding Type & Thickness
DO NOT REMOVE - Keep Posted in Exam Room
The type and thickness of radiation shielding materials listed above are the specific amounts permanently and physically constructed within the walls and barriers of this exam room.(This may be more than what was recommended by the shielding report).
ALL DOORS, WINDOWS & OTHER BARRIERS MEET THE SAME SHIELDING EQUIVALENCE.
AIA®
Document A305 ™ – 1986
Contractor's Qualification Statement
AIA Document A305 ™ – 1986. Copyright © 1964, 1969, 1979 and 1986 byThe Americ an Institute of Architects. All rights reserved. The “American Institute of Architects,” “AIA,” the AIA Logo, and “AIA Contr act Documents” are registered trademarks and may no t be used without permission. This draft was produced by AIA software at 17:24:33 ET on 08/2 0/2020 under Order No.9533880565 which expires on 0 1/09/2021, is not for resale, is licensed for one-time use only, and may only be used in acco rdance with the AIA Contract Documents ® Terms of Service. To report copyright violations, e-mail [email protected]. User Notes: (1834300230)
1
ADDITIONS AND DELETIONS: The author of this document has added information needed for its completion. The author may also have revised the text of the original AIA standard form. An Additions and Deletions Report that notes added information as well as revisions to the standard form text is available from the author and should be reviewed.
This document has important legal consequences. Consultation with an attorney is encouraged with respect to its completion or modification.
This form is approved and recommended by the American Institute of Architects (AIA) and The Associated General Contractors of America (AGC) for use in evaluating the qualifications of contractors. No endorsement of the submitting party or verification of the information is made by AIA or AGC.
ELECTRONIC COPYING of any portion of this AIA ® Document to another electronic file is prohibited and constitutes a violation of copyright laws as set forth in the footer of this document.
The Undersigned certifies under oath that the information provided herein is true and sufficiently complete so as not to
be misleading.
SUBMITTED TO:
ADDRESS:
SUBMITTED BY:
NAME:
ADDRESS:
PRINCIPAL OFFICE:
[ ] Corporation
[ ] Partnership
[ ] Individual
[ ] Joint Venture
[ ] Other
NAME OF PROJECT: (if applicable) Bay Mills Health Center, Brimley, MI
TYPE OF WORK: (file separate form for each Classification of Work)
[ ] General Construction
[ ] HVAC
[ ] Electrical
[ ] Plumbing
[ ] Other: (Specify)
§ 1 ORGANIZATION
§ 1.1 How many years has your organization been in business as a Contractor?
§ 1.2 How many years has your organization been in business under its present business
name?
§ 1.2.1 Under what other or former names has your organization operated?
§ 1.3 If your organization is a corporation, answer the following:
§ 1.3.1 Date of incorporation:
§ 1.3.2 State of incorporation:
§ 1.3.3 President's name:
§ 1.3.4 Vice-president's name(s)
AIA Document A305 ™ – 1986. Copyright © 1964, 1969, 1979 and 1986 byThe Americ an Institute of Architects. All rights reserved. The “American Institute of Architects,” “AIA,” the AIA Logo, and “AIA Contr act Documents” are registered trademarks and may no t be used without permission. This draft was produced by AIA software at 17:24:33 ET on 08/2 0/2020 under Order No.9533880565 which expires on 0 1/09/2021, is not for resale, is licensed for one-time use only, and may only be used in acco rdance with the AIA Contract Documents ® Terms of Service. To report copyright violations, e-mail [email protected]. User Notes: (1834300230)
2
§ 1.3.5 Secretary's name:
§ 1.3.6 Treasurer's name:
§ 1.4 If your organization is a partnership, answer the following:
§ 1.4.1 Date of organization:
§ 1.4.2 Type of partnership (if applicable):
§ 1.4.3 Name(s) of general partner(s)
§ 1.5 If your organization is individually owned, answer the following:
§ 1.5.1 Date of organization:
§ 1.5.2 Name of owner:
§ 1.6 If the form of your organization is other than those listed above, describe it and name the principals:
§ 2 LICENSING § 2.1 List jurisdictions and trade categories in which your organization is legally qualified to do business, and indicate
registration or license numbers, if applicable.
§ 2.2 List jurisdictions in which your organization's partnership or trade name is filed.
§ 3 EXPERIENCE
§ 3.1 List the categories of work that your organization normally performs with its own forces.
§ 3.2 Claims and Suits. (If the answer to any of the questions below is yes, please attach details.)
§ 3.2.1 Has your organization ever failed to complete any work awarded to it?
§ 3.2.2 Are there any judgments, claims, arbitration proceedings or suits pending or outstanding against your
organization or its officers?
§ 3.2.3 Has your organization filed any law suits or requested arbitration with regard to construction contracts
within the last five years?
§ 3.3 Within the last five years, has any officer or principal of your organization ever been an officer or principal of
another organization when it failed to complete a construction contract? (If the answer is yes, please attach details.)
AIA Document A305 ™ – 1986. Copyright © 1964, 1969, 1979 and 1986 byThe Americ an Institute of Architects. All rights reserved. The “American Institute of Architects,” “AIA,” the AIA Logo, and “AIA Contr act Documents” are registered trademarks and may no t be used without permission. This draft was produced by AIA software at 17:24:33 ET on 08/2 0/2020 under Order No.9533880565 which expires on 0 1/09/2021, is not for resale, is licensed for one-time use only, and may only be used in acco rdance with the AIA Contract Documents ® Terms of Service. To report copyright violations, e-mail [email protected]. User Notes: (1834300230)
3
§ 3.4 On a separate sheet, list major construction projects your organization has in progress, giving the name of
project, owner, architect, contract amount, percent complete and scheduled completion date.
§ 3.4.1 State total worth of work in progress and under contract:
§ 3.5 On a separate sheet, list the major projects your organization has completed in the past five years, giving the
name of project, owner, architect, contract amount, date of completion and percentage of the cost of the work
performed with your own forces.
§ 3.5.1 State average annual amount of construction work performed during the past five years:
§ 3.6 On a separate sheet, list the construction experience and present commitments of the key individuals of your
organization.
§ 4 REFERENCES
§ 4.1 Trade References:
§ 4.2 Bank References:
§ 4.3 Surety:
§ 4.3.1 Name of bonding company:
§ 4.3.2 Name and address of agent:
§ 5 FINANCING
§ 5.1 Financial Statement.
§ 5.1.1 Attach a financial statement, preferably audited, including your organization's latest balance sheet and
income statement showing the following items:
AIA Document A305 ™ – 1986. Copyright © 1964, 1969, 1979 and 1986 byThe Americ an Institute of Architects. All rights reserved. The “American Institute of Architects,” “AIA,” the AIA Logo, and “AIA Contr act Documents” are registered trademarks and may no t be used without permission. This draft was produced by AIA software at 17:24:33 ET on 08/2 0/2020 under Order No.9533880565 which expires on 0 1/09/2021, is not for resale, is licensed for one-time use only, and may only be used in acco rdance with the AIA Contract Documents ® Terms of Service. To report copyright violations, e-mail [email protected]. User Notes: (1834300230)
4
Current Assets (e.g., cash, joint venture accounts, accounts receivable, notes receivable, accrued
income, deposits, materials inventory and prepaid expenses);
Net Fixed Assets;
Other Assets;
Current Liabilities (e.g., accounts payable, notes payable, accrued expenses, provision for income
taxes, advances, accrued salaries and accrued payroll taxes);
Other Liabilities (e.g., capital, capital stock, authorized and outstanding shares par values, earned
surplus and retained earnings).
§ 5.1.2 Name and address of firm preparing attached financial statement, and date thereof:
§ 5.1.3 Is the attached financial statement for the identical organization named on page one?
§ 5.1.4 If not, explain the relationship and financial responsibility of the organization whose financial
statement is provided (e.g., parent-subsidiary).
§ 5.2 Will the organization whose financial statement is attached act as guarantor of the contract for construction?
§ 6 SIGNATURE
§ 6.1 Dated at this day of
Name of Organization:
By:
Title:
§ 6.2
M being duly sworn deposes and says that the information provided herein
is true and sufficiently complete so as not to be misleading.
Subscribed and sworn before me this day of
Notary Public:
My Commission Expires:
18131 / Bay Mills Health Center 08 33 26 - 1 OVERHEAD COILING GRILLES
SECTION 08 33 26
OVERHEAD COILING GRILLES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Overhead coiling metal grilles and operating hardware, electric operation.
B. Wiring from electric circuit disconnect to operator to control station.
1.02 RELATED SECTIONS
A. Section 26 27 17 - Equipment Wiring: Power to disconnect.
B. Section 26 05 34 - Conduit: Conduit from electric circuit to operator and from operator to control station.
1.03 REFERENCE STANDARDS
A. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 2013.
B. ASTM B169/B169M - Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar; 2010.
C. ASTM B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes; 2013.
D. ASTM B221M - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]; 2013.
E. NEMA 250 - Enclosures for Electrical Equipment (1000 Volts Maximum); National Electrical Manufacturers Association; 2014.
F. NEMA ICS 2 - Industrial Control and Systems: Controllers, Contactors, and Overload Relays, Rated 600 V; National Electrical Manufacturers Association; 2000 (R2008).
G. NEMA MG 1 - Motors and Generators; National Electrical Manufacturers Association; 2011.
H. UL (EAUED) - Electrical Appliance and Utilization Equipment Directory; Underwriters Laboratories Inc.; current edition.
1.04 SUBMITTALS
A. See Section 01 30 00 - Administrative Requirements, for submittal procedures.
B. Product Data: Provide general construction, component connections and details, color selection charts.
C. Shop Drawings: Indicate pertinent dimensioning, anchorage methods, hardware locations, and installation details.
D. Manufacturer's Installation Instructions: Indicate installation sequence and procedures, adjustment and alignment procedures.
E. Maintenance Data: Indicate lubrication requirements and frequency.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Overhead Coiling Grilles:
1. Overhead Door Corporation; Product 670 Series: www.OverheadDoor.com.
2. Substitutions: See Section 01 60 00 - Product Requirements.
2.02 GRILLE AND COMPONENTS
A. Grille: Aluminum; horizontal bar curtain, coiling on overhead counterbalanced shaft.
1. Finish: Anodized, Clear color.
2. Lock: Outside cylinder lock.
3. Electric operation.
4. Mounting: As indicated.
18131 / Bay Mills Health Center 08 33 26 - 2 OVERHEAD COILING GRILLES
B. Curtain: Round horizontal bars connected with vertical links.
1. Horizontal bars: 5/16 inch diameter.
2. Bar spacing: 1 1/2 inch on center.
3. Tube spacers: 1/2 inch diameter.
4. Spacer spacing: 3 1/4 inch on center.
5. Link spacing: 9 inch on center.
6. Bar Ends: Provide with nylon runners for quiet operation.
7. Bottom Bar: Back-to-back angles with tubular resilient cushion.
C. Guides: Extruded aluminum angles, of profile to retain grille in place with snap-on trim, mounting brackets of same metal.
D. Hood Enclosure: 24 gage galvanized steel sheet; internally reinforced to maintain rigidity and shape.
1. Finish: Factory painted, color as selected.
E. Hardware:
1. Lock Cylinders: Manufacturer's standard type; keyed master keyed.
2. Latching: Inside mounted, adjustable keeper, spring activated latch bar with feature to keep in locked or retracted position.
3. Latch Handle: Interior and exterior handle.
F. Roller Shaft Counterbalance: Steel pipe and helical steel spring system, capable of producing torque sufficient to ensure smooth operation of curtain from any position and capable of holding position at mid-travel; with adjustable spring tension; requiring 25 lb nominal force to operate.
2.03 MATERIALS
A. Aluminum: ASTM B221 (ASTM B221M).
B. Galvanized Steel Sheet: ASTM A653/A653M, galvanized to minimum G90/Z275 coating.
2.04 ELECTRIC OPERATION
A. Electric Operators:
1. Mounting: Side mounted.
2. Motor Enclosure:
3. Motor Rating: 1/3 hp; continuous duty.
4. Motor Voltage: 120 volt, single phase, 60 Hz.
5. Motor Controller: NEMA ICS 2, full voltage, reversing magnetic motor starter.
6. Controller Enclosure: NEMA 250 Type 1.
7. Opening Speed: 12 inches per second.
8. Brake: Adjustable friction clutch type, activated by motor controller.
9. Manual override in case of power failure.
B. Control Station: Standard keyed switch (OPEN-STOP-CLOSE) momentary control for each operator.
1. 24 volt circuit.
2. Surface mounted.
C. Safety Edge: Located at bottom of curtain, full width, electro-mechanical sensitized type, wired to stop operator upon striking object, hollow neoprene covered.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that opening sizes, tolerances and conditions are acceptable.
3.02 INSTALLATION
A. Install grille unit assembly in accordance with manufacturer's instructions.
B. Use anchorage devices to securely fasten assembly to wall construction and building framing without distortion or stress.
18131 / Bay Mills Health Center 08 33 26 - 3 OVERHEAD COILING GRILLES
C. Securely and rigidly brace components suspended from structure. Secure guides to structural members only.
D. Fit and align assembly including hardware; level and plumb, to provide smooth operation.
E. Coordinate installation of electrical service with Section 26 27 17.
F. Complete wiring from disconnect to unit components.
G. Install perimeter trim.
3.03 TOLERANCES
A. Maintain dimensional tolerances and alignment with adjacent work.
B. Maximum Variation From Plumb: 1/16 inch.
C. Maximum Variation From Level: 1/16 inch.
D. Longitudinal or Diagonal Warp: Plus or minus 1/8 inch per 10 ft straight edge.
3.04 ADJUSTING
A. Adjust grille, hardware and operating assemblies for smooth and noiseless operation.
3.05 CLEANING
A. Clean grille and components.
B. Remove labels and visible markings.
END OF SECTION
18131 / Bay Mills Health Center 08 36 13 - 1 SECTIONAL DOORS
SECTION 08 36 13
SECTIONAL DOORS
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Overhead sectional doors, manually and electrically operated.
B. Operating hardware and supports.
C. Electrical controls.
1.02 RELATED REQUIREMENTS
A. Section 06 10 00 - Rough Carpentry: Rough wood framing for door opening.
B. Section 07 92 00 - Joint Sealants: Sealing joints between frames and adjacent construction.
C. Section 26 27 17 - Equipment Wiring.
1.03 REFERENCE STANDARDS
A. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 2013.
B. DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors; Door & Access Systems Manufacturers' Association, International; 2011.
C. NFPA 70 - National Electrical Code; National Fire Protection Association; Most Recent Edition Adopted by Authority Having Jurisdiction, Including All Applicable Amendments and Supplements.
1.04 SUBMITTALS
A. See Section 01 30 00 - Administrative Requirements, for submittal procedures.
B. Shop Drawings: Indicate opening dimensions and required tolerances, connection details, anchorage spacing, hardware locations, installation details.
C. Samples: Submit two panel finish samples,illustrating color and finish.
D. Operation Data: Include electrical control adjustments.
E. Maintenance Data: Include data for motor and transmission, shaft and gearing, lubrication frequency, spare part sources.
F. Warranty: Submit manufacturer warranty and ensure forms have been completed in Owner's name and registered with manufacturer.
1.05 QUALITY ASSURANCE
A. Manufacturer Qualifications: Company specializing in manufacturing the products specified in this section with minimum three years of documented experience.
B. Installer Qualifications: Company specializing in performing the work of this section with minimum 3 years of experience.
C. Conform to applicable code for motor and motor control requirements.
D. Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories Inc., as suitable for the purpose specified.
1.06 WARRANTY
A. See Section 01 78 00 - Closeout Submittals for warranty requirements.
B. Correct defective Work within a two year period after Date of Substantial Completion.
C. Warranty: Include coverage for electric motor and transmission.
D. Provide five year manufacturer warranty for electric operating equipment.
18131 / Bay Mills Health Center 08 36 13 - 2 SECTIONAL DOORS
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Sectional Doors:
1. Clopay Corporation; Product 3300: www.clopaydoor.com.
2. Wayne-Dalton, a Division of Overhead Door Corporation: www.wayne-dalton.com.
3. Raynor - Tri-Core II
4. Windsor Door - Model 2400
5. Midland Door - 3" ES
6. Substitutions: See Section 01 60 00 - Product Requirements.
2.02 STEEL DOOR COMPONENTS
A. Steel Doors: Flush steel, insulated; standard lift operating style with track and hardware; complying with DASMA 102, Commercial application. Metal/foam/metal sandwich panel construction, with EPDM thermal break and ship-lap design with rounded water channels. Units shall have the following characteristics:
1. Door Nominal Thickness: 2 inches thick.
2. Exterior Surface: Ribbed, textured.
3. Exterior Steel: 0.016 inch, hot dipped galvanized.
4. End Stiles: 16 gauge with thermal break.
5. Springs: High cycle, 75,000.
6. Insulation: CFC-free and HCFC-free polyurethane, fully encapsulated.
7. Exterior Finish: Factory finished with acrylic baked enamel; color as selected by Architect.
8. Interior Finish: Factory finished with acrylic baked enamel; color as selected from manufacturers standard line.
9. High Usage package required.
10. Full glazing requiring Aluminum Sash Panels: Insulated double strength glass.
11. Windload Design: ANSI/NAGDM 102 standards and as required by code.
12. Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.
13. Weatherstripping: EPDM rubber tube seals fitted inside joints between sections. EPDM rubber bulb-type strip at bottom. Header seal and jamb weatherstripping.
14. Track: 3 inch galvanized track.
2.03 DOOR COMPONENTS
A. Track: Rolled galvanized steel, 0.090 inch minimum thickness; 2 inch wide, continuous one piece per side; galvanized steel mounting brackets 1/4 inch thick.
B. Hinge and Roller Assemblies: Heavy duty hinges and adjustable roller holders of galvanized steel; floating hardened steel bearing rollers, located at top and bottom of each panel, each side.
C. Lift Mechanism: Torsion spring on cross head shaft, with braided galvanized steel lifting cables.
1. For Manual Operation: Requiring maximum exertion of 25 lbs force to open.
D. Sill Weatherstripping: Resilient hollow rubber strip, one piece; fitted to bottom of door panel, full length contact.
E. Jamb Weatherstripping: Roll formed steel section full height of jamb, fitted with resilient weatherstripping, placed in moderate contact with door panels.
F. Head Weatherstripping: EPDM rubber seal, one piece full length.
G. Panel Joint Weatherstripping: Neoprene foam seal, one piece full length.
2.04 MATERIALS
A. Sheet Steel: Hot-dipped galvanized steel sheet, ASTM A653/A653M, with G60/Z180 coating, plain surface.
B. Insulation: Foamed-in-place polyurethane, bonded to facing.
18131 / Bay Mills Health Center 08 36 13 - 3 SECTIONAL DOORS
2.05 ELECTRICAL OPERATION
A. Provide UL listed electric operator type as recommended by manufacturer for door conditions.
B. Electrical Characteristics:
1. 1/2 hp; manually operable in case of power failure, transit speed of not less than 8 inches per second.
2. 208 volts, three phase, 60 Hz.
3. Refer to Section 26 27 17 for electrical connections.
C. Wiring Terminations: Provide terminal lugs to match branch circuit conductor quantities, sizes, and materials indicated. Enclose terminal lugs in terminal box sized to NFPA 70.
D. Disconnect Switch: Factory mount disconnect switch in control panel.
E. Safety Edge: At bottom of door panel, full width; electro-mechanical sensitized type, wired to stop door upon striking object; hollow neoprene covered to provide weatherstrip seal.
F. Safety Sensors: Electronic eye type sensors mounted near the floor at each side of door, such that if the electric beam is interupted the door will not close.
G. Control Station: Standard three button (open-close-stop) momentary type control for each electric operator.
1. 24 volt circuit.
2. Surface mounted.
3. Locate at inside door jamb.
H. Hand Held Transmitter: Digital control, resettable.
1. Provide hand held transmitters for operating doors.
2. Transmitters shall be custom built with controls to operate each door independently.
3. Furnish 4 hand held transmitters.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that wall openings are ready to receive work and opening dimensions and tolerances are within specified limits.
B. Verify that electric power is available and of the correct characteristics.
3.02 PREPARATION
A. Prepare opening to permit correct installation of door unit to perimeter air and vapor barrier seal.
3.03 INSTALLATION
A. Install door unit assembly in accordance with manufacturer's instructions.
B. Anchor assembly to wall construction and building framing without distortion or stress.
C. Securely brace door tracks suspended from structure. Secure tracks to structural members only.
D. Fit and align door assembly including hardware.
E. Coordinate installation of electrical service. Complete power and control wiring from disconnect to unit components.
F. Coordinate installation of sealants and backing materials at frame perimeter as specified in Section 07 90 05.
3.04 TOLERANCES
A. Maximum Variation from Plumb: 1/16 inch.
B. Maximum Variation from Level: 1/16 inch.
C. Longitudinal or Diagonal Warp: Plus or minus 1/8 inch from 10 ft straight edge.
D. Maintain dimensional tolerances and alignment with adjacent work.
18131 / Bay Mills Health Center 08 36 13 - 4 SECTIONAL DOORS
3.05 ADJUSTING
A. Test sectional doors for proper operation without binding or distortion.
B. Adjust door assembly for smooth operation and full contact with weatherstripping.
C. Touch-up damaged coatings and finishes and repair minor damage. Clean exposed surfaces using non-abrasive materials and methods recommended by manufacturer of material or product being cleaned.
3.06 CLEANING
A. Clean doors and frames and glazing.
B. Remove temporary labels and visible markings.
3.07 PROTECTION
A. Protect installed products from damage until Date of Substantial Completion.
B. Clean doors, frames and glazing.
C. Remove temporary labels and visible markings.
D. Do not permit construction traffic through overhead door openings after adjustment and cleaning.
END OF SECTION
18131 / Bay Mills Health Center 13 09 00 - 1 LEAD LINED MATERIALS
SECTION 13 09 00
LEAD LINED MATERIALS
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Construction of lead enclosure around x-ray treatment rooms and control rooms.
1.02 RELATED REQUIREMENTS
A. Section 08 11 13 - Hollow Metal Doors and Frames.
B. Section 08 71 00 - Door Hardware.
C. Section 09 21 16 - Gypsum Board Assemblies: Joint taping over lead lined gypsum board.
1.03 REFERENCE STANDARDS
A. ASTM C1396/C1396M - Standard Specification for Gypsum Board; 2013.
1.04 SYSTEM DESCRIPTION
A. Radiation Protection: Contain, without leakage, emitted radiation, measured at wall surface with device simulating the emitting equipment.
1.05 ADMINISTRATIVE REQUIREMENTS
A. Coordinate this work with the construction of the building elements that x-ray protection is applied to or installed in.
B. Preinstallation Meeting: Convene one week prior to commencing work of this section.
1.06 SUBMITTALS
A. See Section 01 30 00 - Administrative Requirements, for submittal procedures.
B. Shop Drawings: Indicate layout, details, dimensions, interface with adjoining work, and any relative information.
C. Product Data: Provide data on leaded glass and Leaded Gypsum Wallboard.
1.07 QUALITY ASSURANCE
A. Manufacturer Qualifications: Company specializing in manufacturing the Products specified in this section with minimum 5 years documented experience.
B. Installer Qualifications: Company specializing in performing the work of this section with minimum 5 years’ experience.
1.08 REGULATORY REQUIREMENTS
A. Conform to applicable health and occupation code for integrity of radiation protection and continuity of protected construction.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. X-Ray Radiation Protection:1. A & L Shielding Inc: www.alshielding.com.2. Mayco Industries, Inc: www.maycoindustries.com.3. Radiation Protection Products: www.radiationproducts.com.4. Ray-Bar Engineering Corp: www.raybareng.net.5. Substitutions: See Section 01 60 00 - Product Requirements.
2.02 SHEET LEAD AND ASSOCIATED MATERIALS
A. Gypsum Board: ASTM C1396/C1396M, paper/paper faced, square edges and square ends; 48 x 96 inch size, 1/2 inch thick or as indicated on drawings.
B. Lead-Laminated Gypsum Board: Single unpierced layer of sheet lead laminated to back of gypsum board, ÅSTM C 1396/1396M; gypsum core wall panel with additives to enhance fire resistance of core and surfaced with paper on front, back, and long edges; Type X, UL rated.
18131 / Bay Mills Health Center 13 09 00 - 2 LEAD LINED MATERIALS
C. Lead Equivalence: Thickness of lead that provides same attenuation (reduction of radiation passing through) as material in question under specified conditions. Lead equivalence specified for materials used in diagnostic X-Ray rooms is measured at 150 kV unless indicated otherwise
2.03 OTHER RELATED MATERIALS
A. *Lead line thickness to be verified with physicist report.1. Hollow Metal2. Door Hardware
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that existing surfaces are ready to receive work and opening dimensions are as indicated on shop drawings.
3.02 INSTALLATION - SHEET LEAD
A. Install lead sheets to wall substrate by mechanical attachments; lead headed fasteners spaced at 4 inches to framing members. Install lead laminated products with lead face against supports.
B. Install new frames in accordance with manufacturers instructions.
3.03 INSTALLATION - COMPONENTS AND ACCESSORIES
A. Install components and accessories in accordance with manufacturer's instructions.
END OF SECTION
A5.1
A5.1 4
3
N
9'-7" 9'-6" 11'-2"
9'-6" 9'-5" 9'-5" 11'-4" 12'-0"
5'-8"
9'-4" 10'-4" 12'-11 9/16"
COMMUNITYHEALTH
1063
COMMUNITYHEALTH
1064
PROVIDEROFFICE1094A
PROVIDEROFFICE1094B
NURSE1094
PROVIDEROFFICE1094C
PROVIDEROFFICE1094D
TRADITITIONALHEALING
1106
PLAYTHERAPY
1114
GROUPTHERAPY
1113
PROCEDUREHALWAY
1100
CONSULT1101
PROCEDUREROOM (POSPRESSURE)
1102
TOILET1103
PROCEDUREROOM (POSPRESSURE)
1104
CLEAN1091
EXAM1088
EXAM1087
EXAM1086
SCALE1085
SOILED1092
EXAM1084
EXAM1083
EXAM (NEGPRESSURE)
1082
TRIAGE(NEG
PRESSURE)1081
MED1093
STAFFTOILET1070A
EXAM1079
EXAM1078
EXAM1077
TOILET1035
SCALE1076
EXAMHALLWAY
1070
FLEX OFFICE1075
EXAM1074
EXAM1073
EXAM1072
CONSULT1071
COMMUNITYHEALTH
(BRENDA)1060
COMMUNITYHEALTH
(THERESA)1059
COMMUNITYHEALTH
(GINA HE)1058
COMMUNITYHEALTH
(STEPHANIE)1057
C.H. WorkRoom1056
COMMUNITYHEALTH
(TRANSPORT)1055
COMMUNITYHEALTH
(CONNIE)1054
COMMUNITYHEALTH
(SHELBY)1053
COMMUNITYHEALTH
(JOANNT)1052
AMBULANCEHOLD (negpressure)
1051
MECH1042
C.H.HALLWAY
1050
PROCEDUREHALLWAY
1105
STAFFHALLWAY
1090
C.H.HALLWAY
1061
VEST.1038A
STAFFBREAKROOM1029
OFFICE1028
LAUNDRY1027
DATA1026
HALLWAY1024
HALLWAY1025
TOILET1033B
TOILET1033A
STAFFMOTHERS
ROOM1031
MAMMO1038
HOUSEKEEPING1030
RADIOLOGY1039
WAIT1036
STAFF WORK1037A
TOILET1040
CHANGE1039A
MOTHERSROOM1009
WOMENSTOILET1008
WAITING1007
MEN'STOILET1010
OPTICALSALES1153
WAITING1130 STAFF WORK
1132
HALLWAY1034A
EXAMHALLWAY
1080
HALLWAY1034B
DENTALWAIT1200
PRC(ASHLEY)
1014
PRC(MIKALA)
1015
PATIENTREG/
CONSULT1016
OUTREACH(CHELSEY)
1019
INSURANCE(SHELLEY)
1018SWITCHBOARD
1017
WORK1012
RE-APPOINT/PAYMENT
1011
CENTRALREGISTRATION
1013
JAN.1107
1A6.2
2A6.2
3A6.2
COMMUNITYHEALTH
1062
A7.1
1
A7.2
1
A7.3
1
A7.3
2
A7.3
4
A7.3
3
A7.3
5
A7.3 24
25
6'-0" 18'-8" 12'-8" 12'-8" 10'-0" 7'-10" 22'-3" 11'-11"
A7.5
8
NURSESUPERVISOR
(BETTY)1065
A7.6
1
A5.1
5
A7.3
6
6
MEETINGROOM1002
PHARMACYWORK1023
PHARMACYOFFICE1023A
PHARMACYCONSULT
1021
PHARMACYCONSULT
1022
PHARMACYWAITING1020B
PHARMACYRETAIL1020A
PHARMACYTOILET1023B
4'-6" 21'-4" 25'-10"
cr
AL-W1
8A6.2
6A6.2
tv wall
seating for 40
tv
tv
A7.74
NN NN
MM MM
1
1
2
2
3
3
4
4
5
5
6 7 10
10
15 16 21
21
22
22
24
24 26 27 28
29 30
31
LL
KK
JJ
II
HH
EE
DD
AA
Y
W
V
N
L
25
25
Q
P
M
A7.7 9
32
T
O
19181413
29
'-0
"1
6'-
0"
1'-
8"
REGISTRATIONHALL1003
VESTIBULE1001
HALLWAY1004
HALLWAY1005
HALL1037
1200B
1016A
11
10
A
1010
1101
11
02
1103A1103B
11
04
10
94
D
1106
11
17
11
07
1062
1063
1064
1055
10
54
10
53
10
52 1051
1041
10
41
A
10
38
A
10
56
10
57
10
60
10
59
10
58
1065
10
94
A
1075
10
94
10
74
10
73
10
72 1071
10
77
10
78
10
79
10
70
A
1093
1092
10
84
10
83
10
82
1081
1035
10
94
E
1094C
1091
10
88
10
87
10
86
1007B
1007A
1008
1037
1033B 1033A
10
31
10
38
1039
10
40
10
30
10
26
10
27
10
28
1033 1023
10
23
B
10
23
A1
02
2B
10
21
B1
02
1A
10
22
A
1002A
1020
10
17
10
18
10
19
1011
10
14
10
15
10
16
1200
1094B
10
38
B
10
02
1009
10
14
A
10
15
A
10
24
9'-6" 9'-6" 9'-6" 11'-2" 12'-0"
13
'-6
"8
'-6
"8
'-6
"9
'-3
"9
'-3
"
7B
5A
7A
5A
5B
5A
5'-
6"
15
'-3
"7
'-8
"5
'-6
"7
'-8
1/2
"7
'-9
1/1
6"
7'-
8 1
/2"
5'-
6"
14
'-0
"9
'-2
"5
'-6
"1
1'-
7"
5'-
11
"1
1'-
1"
F.E.C.
7A
5A 5A
5A
5A 5A 5B 7B
5B
5A
5A 5A 5A
7A
7A
5A 5A 5A 5A 7A
5A
CL
1'-6"
CL
1'-6"
CL
1'-6"
F.E.C.
CL
1'-6"CL
1'-6"
CL
1'-6"
5A
7A
7A
5A 5A
5A 5ACL
1'-6"
CL
1'-6"
CL
1'-6"
CLR4 7/8"
11'-1" 5'-7" 9'-6" 9'-6" 9'-6" 9'-6" 13'-8"
5'-8"
A7.3
34
STORAGE1002A
Hall1006
HALLWAY1007A
HALLWAY1007B
Bio Hazard1043
10
42
A1
04
2
1043
11'-1" 5'-7" 36'-7" 14'-6" 6'-7"
5'-
0"
STORAGE1041
10
19
A
10
18
A
10
21
C
GG
FF
BB
S
8
8
12
4'-0" 56'-0" 21'-8" 18'-4" 77'-8" 24'-8"
13'-4" 3'-4" 14'-6" 20'-10" 4'-0" 4'-10" 6'-4" 3'-2" 3'-10" 3'-6"
1'-8" 26'-2" 26'-6" 1'-8"4"
19'-8" 1'-8" 16'-8" 1'-8" 34'-0" 19'-8" 22'-4" 1'-8" 23'-8"1'-0"
3'-4" 12'-0" 3'-0" 5'-4" 4'-0" 4'-0" 4'-0" 14'-4" 24'-0" 4'-0" 8'-0" 4'-0" 6'-0"
21
'-0
"1
8'-
0"
27
'-0
"3
8'-
0"
2'-
0"
24
'-8
"
6'-
0"
4'-
0"
4'-
8"
7B
A5.12
3'-
0"
13
'-0
"1
'-8
"1
'-4
"4
'-0
"3
'-8
"4
'-0
"3
'-8
"7
'-0
"2
'-0
"7
'-0
"4
'-0
"7
'-0
"2
'-0
"7
'-0
"3
'-1
0"
4'-
0"
4'-
0"
4'-
0"
7'-
0"
4'-
0"
6'-
0"
4'-
0"
4'-
6"
4'-
0"
5'-
0"
4'-
0"
12
'-0
"1
'-8
"
14
'-8
"6
'-0
"2
8'-
8"
28
'-8
"2
8'-
8"
28
'-8
"
14
'-8
"1
20
'-8
"
1106A
N
/1 A2.2 /1 A2.2
1'-
8"
1A6.1
4A6.1
2A6.1
1039A
cr
cr
7B
5B
5B
7B
5A
11
'-7
"1
1'-
7"
5'-
6"
11
'-7
"1
1'-
7"
5'-
6"
11
'-7
"1
7'-
8 7
/8"
9'-
8"
CL
1'-6"
CL
1'-6"
CL
1'-6"
7A
7A
5A
5A 5A
7A
5A
5A
CL4'-0"
5A5A
5A
8'-
0"
8'-
0"
19
'-4
"1
9'-
4"
8'-
0"
8'-
4 1
1/1
6"
12
'-6
5/8
"
CLR
1'-
9"
CLR1'-0"
CLR
1'-
0"
CLR
1'-
0" 3
'-2
"
5A
5B 5A
5A
5A
7A
5A
7B 5B
A7.7
1
20
'-6
"8
'-1
"5
'-7
"
24'-8"
CLR
1'-
0" CLR
1'-0"
AL-W3 AL-W7 AL-W6
AL-
W3
AL-
W3
AL-
W3
AL-
W3
AL-W4 AL-W4
2'-
5"
CLR
2'-
0"
CLR
12
'-1
0"
CLR
2'-
0"
CLR
7'-
0"
CLR
7'-
0"
CLR
2'-
0"
CLR
12
'-1
0"
CLR
2'-
0"
EQ
EQ
7A4A
7E
4A
7A
7A 5A
7A
7A
5A
5A7A
7A
7A
5A
5A
7A
7A
42
'-0
"
135°135°
9'-0" 51'-0"
5'-6 3/4" 5'-0" 5'-6 3/4"
5A
7A
7A
5'-
4"
5A
7B
5B
5B
5A
1'-
8"
AL-
W1
0
AL-W
4A
L-W
8A
L-W
8A
L-W
4
AL-W
9
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-
W5
AL-
W5
AL-
W5
AL-
W5
AL-
W2
AL-
W2
AL-
W2
HM
-W5
6A6.1
A5.17
AL-W2 AL-W2
7A6.2
10A6.2
11A6.2
A7.712
A7.3
15
16
77'-8"
25'-4"
A7.7 8
A7.7 10
1
MATCHLINEMATCHLINE
5'-
7"
5'-
10
3/4
"
11'-6"CLR
6'-1" 6'-7 1/8"
14'-10" 6'-2" 13'-1"
8'-
2"
6'-0" 5'-1"
6'-0" 5'-1"
11'-1" 5'-7" 16'-0" 7'-8" 16'-0"
2'-
4"
9'-
0"
11
'-7
"5
'-6
"1
1'-
7"
11
'-7
"
7'-
1"
9'-
0"
7'-
1"
7'-5" 5A5A
5A
5A5A
7A
5A
7A
7A
2A
12'-0"
12'-4"
8'-
0"
4A4A
8'-4"
3'-6"
6'-7 5/16"
2'-2 1
3/16"
8'-6 1/16"
12'-4"
12'-0"
8'-
0"
7'-
1 1
/8"
5'-
8 7
/8"
CLR
4'-0" 10'-6" CLR 10'-1 1/8" CLR
7'-8" 6'-0" 8'-6"
8'-
0"
7'-
1"
5'-
9"
13
'-0
"
7'-3" 7'-2" 8'-0" 11'-5" 14'-6"
5'-1" 4'-5" 4'-11"
5'-
6"
5'-
4"
2'-
2"
12'-6 9/16" CLR
3'-3"
5'-
7"
14
'-3
7/8
"
9'-
0"
9'-
0"
17
'-2
"9
'-1
0"
8'-
5"
7'-
0"
11
'-7
"9
'-0
"9
'-0
"7
'-4
"1
2'-
0"
6'-
5 1
/4"
9'-
6 3
/4"
12
'-0
"7
'-4
"
10'-6 13/16" 7'-2 1/4" 4'-4 11/16" 7'-2 1/4" 9'-4 1/2" 3'-3 1/2"
cr cr
cr
cr
cr
cr
cr
cr cr
cr
cr cr
cr
cr
cr
cr cr
11
38
11
39
6'-0" CLR
5 13/16"8 1/2"
26
'-8
3/8
"
1'-0"
1153
cr
cr
A4.2
5
10
13
6'-7" 6'-7"
4
A4.2A4.2
7
A4.2
6
1020A 1020B
MH
-W7
MH
-W7
2'-4 15/16" 12'-11 1/4"
A7.7
11
A7.7
11
WCG
WCG
A7.118
A7.1
19
2
2
2AD
D
2 2
2AD
D
2AD
D
Wall Types
5A
3 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD. EA. SIDE
BATT INSULATION
METAL STUD WALL TO STRUCTURE
5BMETAL STUD WALL TO STRUCTURE-
SMOKE PARTITION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
5F
3 5/8" METAL STUD @ 16" O.C.BATT INSULATION
1-HR RATED METAL STUD WALL TO STRUCTURE
(UL# U465) (STC 50)
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
4A
3 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
METAL STUD WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
2A
1 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
FURRING OVER EXISTING WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
1 5/8" METAL STUD CHANNEL
1 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
7A
6" METAL STUD @ 16" O.C.
BATT INSULATION
METAL STUD WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" METAL STUD CHANNEL
6" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
7F
6" METAL STUD @ 16" O.C.
BATT INSULATION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" METAL STUD CHANNEL
6" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
METAL STUD WALL TO STRUCTURE
CLG; SEE SCHEDULE
6A
3 5/8" METAL STUD @ 16" O.C.
(2) LAYERS 5/8" GYP.BD. EA. SIDE
BATT INSULATION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
2-HR RATED METAL STUD WALL TO STRUCTURE (UL# U411) (STC 56)
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" CMU
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
6" CMU BOND BEAM -SEE STRUCT.
8A CONCRETE MASONRY UNIT w/FURRING
LADDER REINFORCEMENT EVERY OTHER COURSE; UNO
3A
2 1/2" METAL STUD @ 16" O.C.
5/8" GYP.BD.
FURRING OVER EXISTING WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
2 1/2" METAL STUD CHANNEL
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
1 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
1 5/8" METAL STUD CHANNEL
1 5/8" METAL STUD DEFLECTION TRACK
CLG; SEE SCHEDULECLG; SEE SCHEDULE
2 1/2" METAL STUD DEFLECTION TRACK
ACOUSTIC SEALANTACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANTACOUSTIC SEALANTACOUSTIC SEALANT
ACOUSTIC SEALANT
CLG; SEE SCHEDULE
NOTE: ALL WALLS SHALL BE BUILT TO STRUCTURE ABOVE UNLESS OTHERWISE NOTED
5A
2 1/2" METAL STUD @ 24" O.C.
(2) LAYERS 1/2" FIRE-RATED GYP.BD.
2-HOUR FIRE-RATED CHASE WALL UL# U415
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
2 1/2" METAL STUD CHANNEL
2 1/2" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
1" GLASS-MAT GYP. BD. LINER PANEL
SHAFT SIDE
2 1/4" 3 1/8" 4 1/4" 4 1/2"
ACOUSTIC SEALANT EA. SIDE
4 7/8" 4 7/8" 6 1/8" 7 1/4" 6 5/8"7 7/8"
5COMIT BATT INSULATION
7BMETAL STUD WALL TO STRUCTURE-
SMOKE PARTITION
5DMETAL STUD WALL TO
STRUCTURE-
SMOKE PARTITIONLEAD LINED
5EMETAL STUD WALL TO STRUCTURE-
LEAD LINED
7CMETAL STUD WALL TO STRUCTURE-
LEAD LINED
7DOMIT BATT INSULATION
7E
1-HR RATED METAL STUD WALL TO STRUCTURE
(UL# U465) (STC 50)
7F
1 HR RATED METAL STUD
WALL TO STRUCTURE-RC
CHANNELS SYMBOL SIDE
(UL# U465)
Floor Plan Key
south
north
N
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
Rebecca J Lewis, FAIA, FACHA, CID
1301056849
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
8/20/2020 3:30:20 PM
018131.00
JMD
RJL
07/06/2020
Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715
A2.1
Floor Plan-South
Floor Plan Notes1 WALL-MOUNTED TV LOCATION (EQUIP. BY OWNER.)
2 Provide continuous FRP-1 panel to 4'-4" A.F.F.
Floor Plan General NotesA Interior dimensions are to finished face of stud wall, face of masonry
walls, to centerline of columns or to other grid points unless otherwisenoted. Dimensions labeled as CLEAR or CLR indicate minimum distance tofinished face of walls. Dimensions are to finished face of existing walls ifapplicable.
B All interior door frames to be 2" from adjacent wall or centered betweenwalls unless otherwise noted.
C Furniture & equipment shown is for reference only and is not included inthe contract.
D Coordinate size and location of all duct and shaft openings in walls andfloors with MEP consultant.
E Fire rated walls are indicated on the Life Safety Plan.
1/8" = 1'-0"1
Level 1 Floor Plan -South
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^aa O OMOMLMULOM
11'-1" 5'-7" 10'-4" 10'-4" 10'-4" 10'-4" 10'-4"
5'-8"
TRADITITIONALHEALING
1106
OFFICE1118
OFFICE1119
OFFICE1120
OFFICE1121
OFFICE1122
OFFICE1123
OFFICE1124
OFFICE1125
OFFICE1126
Storage1111OFFICE
1112OFFICE1115
OFFICE1116
PLAYTHERAPY
1114
STORAGE1114A
GROUPTHERAPY
1113
B.H.HALLWAY
1110
PROCEDUREHALWAY
1100
B.H.HALLWAY
1117
MEN'STOILET1010
OPTICALSALES1153
DRAW1133
WAITING1130 STAFF WORK
1132
LAB HALL1131
SPECIMENTOILET1131A
SPECIMENTOILET1131B
TOILET1137
LAB1134
LAB OFFICE1135
WORKROOM1151
CONTACTS1152
OPTICALHALLWAY
1150
OPTICALEXAM1154
OPTICALEXAM1155
HALLWAY1034C
HALLWAY1140
HALLWAY1142
MEETING1143
MEETING1144
H.I.M1160
REFERENCE1161
VISITATION1162
TOILET1145
ADMINOFFICE(ABBY)1172
ADMINOFFICE
(YVONNE)1173
ADMINOFFICE
(AUDREY)1174
ADMINOFFICE(TARA)1175
ADMINOFFICE(DAN)1176
BILLINGOFFICE
(ASHLEY)1177
HIM OFFICE(ANDREW)
1178
BILLING1171
BILLINGHALLWAY
1170
MECH.1223
DENTALOFFICE1217
DENTALOFFICE1218
DENTALEXAM1216
DENTALEXAM1215
LOCKERS1222
MECHROOM1221
TOILET1220
LAB OFFICE1210A
LAB1210
TOILET1209
STERILIZATION1208
DENTALHALLWAY
1207
PAN1205
PANOPERATOR
1202A
DENTALRECORDS
1203
DENTALCONSULT
1201
DENTALWAIT1200
DENTALRECEPTION
1204
DENTALEXAM1214
DENTALEXAM1212
DENTALEXAM1211
DENTALHALLWAY
1202
DENTALHALLWAY
1219
JAN.1107
5A6.2
A7.3 31
A7.3 3332
A7.4
1
A7.5
2
A7.5
1
A7.3
6
A5.1
1
4'-6" 21'-4" 25'-10"
42"42"
IT1136
1'-8"2'-4"1'-8" 3'-4" 3'-10" 4'-6" 4'-0" 4'-0" 4'-0" 6'-6" 4'-0" 6'-6" 4'-0" 6'-0" 4'-0" 5'-8" 4'-0" 4'-0"
5'-4"
3'-
6"
4'-
0"
5'-
6"
4'-
0"
9'-
6"
5'-
6"
4'-
0"
6'-
8"
4'-
0"
8'-
4"
1'-
8"
4A6.2
1
1
2
2
3
3
4
4
5
5 9
11
11
17
17 20
21
21
22 24 26
26
N
L
B B
A A
25
25
M
G
H
D
C
O
1'-
8"
27
'-8
"2
0'-
0"
20
'-0
"2
0'-
0"
19
'-8
"1
'-8
"
12
02
1217
1218
1216B
1216A
1215B
12
20
1215A
1209
1203
12
01
B1
20
1A
1200B
11
10
A
1207
11
70
12
22
12
21
12
23
11
78
11
77
11
75
11
76
1174
1173
1172
11
42
1145
1144
1160
1143
11
61
B1
16
1A
11
35
B
1135A
11
50
1155
1152
1154
1010
1106
11
17
11
07
11
14
11
13
1113A
1136
11
11
11
12
11
26
11
25
11
24
11
15
11
16
11
23
11
22
1121
1120
1119
1118
1131A1
13
1B
1133
11
34
sla
t w
all
11
62
B1
16
2A
1137
1114A
1110
1200
A7.3
34 HALLWAY1007B
HALLWAY1141
DENTALEXAM1213
1140
1219
12
04
10
34
K
F F
E E
8
8
23
23
I
5'-
4"
4'-
0"
5'-
0"
4'-
0"
6'-
6"
4'-
0"
5'-
6"
4'-
0"
3'-
0"
1106A
/1 A2.1
1'-
8"
29
'-8
"1
0'-
0"
1'-
8"
41
'-4
"
1'-
8"
9'-
8"
1'-
8"
16
'-4
"2
0'-
0"
15
'-4
"
11
'-4
"5
3'-
4"
/1 A2.1
5'-0" 4'-0" 8'-0" 4'-0" 6'-0" 4'-0" 6'-6" 4'-0" 6'-0" 4'-0"
1'-6"
19'-0" 4'-0" 3'-0" 3'-4" 17'-8"
5'-8" 73'-8" 53'-0" 47'-0"
1'-8"2'-4"1'-8" 26'-2" 28'-6" 19'-0" 1'-8" 25'-6" 25'-10" 1'-8" 23'-6" 20'-2" 1'-8"
9A6.2
CLR
1'-
0" 3
'-2
"
5A
5B 5A
5A
5A7A 5A 5A
7A
5A
7A
7A
9'-
10
"1
0'-
2"
10
'-3
"1
0'-
5 1
1/1
6"
11
'-9
"5
'-6
"1
2'-
5"
8'-
6"
5'-
4"
11'-1" 5'-7" 10'-4" 10'-4" 10'-4" 10'-4" 10'-4" 6'-0" 7'-8" 14'-2" 11'-0" 5'-6" 10'-0" 5'-8" 13'-9" 9'-9" 6'-3 5/8" 14'-3 1/4"
6'-
9 9
/16
"5
'-6
1/4
"1
3'-
10
"
7A
5A
5A
5A
7A5A 5A5A 5A
5A7A
5A
5A
7A5A 5A
5A
5B
5B
7B7A
5B 7B
7B5A
7A
7A
5A
7B
5B
5B
5A
7A
3'-4"
EQ
EQ
3'-
8"
6'-
0"
8'-
0"
6'-
0"
6'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
4'-
0"
6'-
0"
1'-
8"
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-W2 AL-W2 AL-W2 AL-W2 AL-W2 AL-W2 AL-W2
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-
W2
AL-W2 AL-W2 AL-W2 AL-W2 AL-W2
AL-W6
AL-
W1
0A
L-W
10
AL-
W1
0A
L-W
10
AL-
W1
0A
L-W
10
AL-
W1
0A
L-W
10
AL-
W1
0A
L-W
10
HM
-W5
1140A
10A6.2
MED GAS1221A
12
21
A
A7.7 8
179'-4"
11
0'-
8"
J
5'-
0"
MIN
.
5'-
0"
MIN
.
6'-0" 7'-0" 8'-10"
11'-11" 10'-1" 10'-1" 10'-1" 9'-2"
10
'-1
0"
5'-
6"
2'-
9"
13
'-3
"2
4'-
0"
8'-6" 6'-7" 6'-0 3/8" 4'-0" 4'-7 1/4"
11'-11" 6'-0" 7'-7" 21'-10" 5'-8" 23'-6" 6'-3 5/8" 13'-10 3/8"
16
'-4
"1
0'-
0"
10
'-0
"9
'-1
0"
10
'-2
"
3'-6"
12
'-1
1"
12
'-1
1"
12
'-8
"
5'-
7"
5'-
5"
9'-
6"
6'-
10
"9
'-6
"
7'-
3"
6'-
6"
10
'-3
"
7'-6" 14'-5" 7'-6" 5'-8" 8'-8" 14'-10"
1208B
12
08
A
1210
7'-0" 8'-8" 7'-10"
5'-
10
3/4
"9
'-3
"9
'-2
"5
'-4
7/8
"3
'-1
1/8
"8
'-5
"7
'-8
"7
'-1
"7
'-3
"8
'-4
"7
'-7
"
11
'-5
"
11'-6"
11'-0" 1'-0"
2'-
1"
CL
15'-4 7/16"
6'-6 1/16" 13'-7 15/16"
8A
8A
8A
CLR
6'-1" 6'-7 1/8"
14'-10" 6'-2" 13'-1" 4'-9"8
'-2
"6
'-0
"7
'-7
"1
5'-
1"
7'-
7"
7'-
6"
10
7'-
8"
MATCHLINEMATCHLINE
4A4A
cr
cr
cr
cr
cr
cr
cr
cr
cr
cr
9'-
11
5/8
"
13
'-8
"1
4'-
0"
20
'-0
"2
0'-
0"
20
'-0
"2
0'-
4 1
/2"
9'-
0"
9'-
4"
9'-
4"
7'-10"
6'-0" CLR
1153
cr
cr
cr
5'-
0"
A7.5
18
19
A7.520
1147
2
2
F.E.C.
2AD
D
Wall Types
5A
3 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD. EA. SIDE
BATT INSULATION
METAL STUD WALL TO STRUCTURE
5BMETAL STUD WALL TO STRUCTURE-
SMOKE PARTITION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
5F
3 5/8" METAL STUD @ 16" O.C.BATT INSULATION
1-HR RATED METAL STUD WALL TO STRUCTURE
(UL# U465) (STC 50)
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
4A
3 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
METAL STUD WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
2A
1 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
FURRING OVER EXISTING WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
1 5/8" METAL STUD CHANNEL
1 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
7A
6" METAL STUD @ 16" O.C.
BATT INSULATION
METAL STUD WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" METAL STUD CHANNEL
6" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
7F
6" METAL STUD @ 16" O.C.
BATT INSULATION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" METAL STUD CHANNEL
6" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
5/8" GYP.BD.
METAL STUD WALL TO STRUCTURE
CLG; SEE SCHEDULE
6A
3 5/8" METAL STUD @ 16" O.C.
(2) LAYERS 5/8" GYP.BD. EA. SIDE
BATT INSULATION
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
3 5/8" METAL STUD CHANNEL
3 5/8" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
2-HR RATED METAL STUD WALL TO STRUCTURE (UL# U411) (STC 56)
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
6" CMU
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
6" CMU BOND BEAM -SEE STRUCT.
8A CONCRETE MASONRY UNIT w/FURRING
LADDER REINFORCEMENT EVERY OTHER COURSE; UNO
3A
2 1/2" METAL STUD @ 16" O.C.
5/8" GYP.BD.
FURRING OVER EXISTING WALL TO STRUCTURE
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
2 1/2" METAL STUD CHANNEL
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
1 5/8" METAL STUD @ 16" O.C.
5/8" GYP.BD.
1 5/8" METAL STUD CHANNEL
1 5/8" METAL STUD DEFLECTION TRACK
CLG; SEE SCHEDULECLG; SEE SCHEDULE
2 1/2" METAL STUD DEFLECTION TRACK
ACOUSTIC SEALANTACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANT EA. SIDE
ACOUSTIC SEALANTACOUSTIC SEALANTACOUSTIC SEALANT
ACOUSTIC SEALANT
CLG; SEE SCHEDULE
NOTE: ALL WALLS SHALL BE BUILT TO STRUCTURE ABOVE UNLESS OTHERWISE NOTED
5A
2 1/2" METAL STUD @ 24" O.C.
(2) LAYERS 1/2" FIRE-RATED GYP.BD.
2-HOUR FIRE-RATED CHASE WALL UL# U415
SECTION @ FLOOR
PLAN VIEW
SECTION @ HEAD
2 1/2" METAL STUD CHANNEL
2 1/2" METAL STUD DEFLECTION TRACK
BASE - SEE SCHEDULE
ROOF OR FLOOR STRUCTURE
CLG; SEE SCHEDULE
1" GLASS-MAT GYP. BD. LINER PANEL
SHAFT SIDE
2 1/4" 3 1/8" 4 1/4" 4 1/2"
ACOUSTIC SEALANT EA. SIDE
4 7/8" 4 7/8" 6 1/8" 7 1/4" 6 5/8"7 7/8"
5COMIT BATT INSULATION
7BMETAL STUD WALL TO STRUCTURE-
SMOKE PARTITION
5DMETAL STUD WALL TO STRUCTURE-
SMOKE PARTITIONLEAD LINED
5EMETAL STUD WALL TO STRUCTURE-
LEAD LINED
7CMETAL STUD WALL TO STRUCTURE-
LEAD LINED
7DOMIT BATT INSULATION
7E
1-HR RATED METAL STUD WALL TO STRUCTURE
(UL# U465) (STC 50)
7F
1 HR RATED METAL STUD WALL TO STRUCTURE-RC CHANNELS SYMBOL SIDE(UL# U465)
Floor Plan Key
south
north
N
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
Rebecca J Lewis, FAIA, FACHA, CID
1301056849
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
8/20/2020 3:30:23 PM
018131.00
JMD
RJL
07/06/2020
Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715
A2.2
Floor Plan-North
1/8" = 1'-0"1
Level 1 Floor Plan - North
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^aa O OMOMLMULOM
Floor Plan Notes1 WALL-MOUNTED TV LOCATION (EQUIP. BY OWNER.)
2 Provide continuous FRP-1 panel to 4'-4" A.F.F.
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
Rebecca J Lewis, FAIA, FACHA, CID
1301056849
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
8/18/2020 9:27:42 AM
018131.00
Author
Checker
07/06/2020
Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715
A4.1
Room FinishSchedules
ROOM FINISH SCHEDULE
NO. NAME
FLOOR WALL FINISH CEILING
NOTESFINISH BASE NORTH EAST SOUTH WEST MAT'L FINISH1090 STAFF HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---
1091 CLEAN SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1092 SOILED SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1093 MED SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1094 NURSE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1094A PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1094B PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1094C PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1094D PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1100 PROCEDURE HALWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1
1101 CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1102 PROCEDURE ROOM (POSPRESSURE)
SV-1 SV-1 COVE PAINT/ FRP-1 PAINT/ FRP-1 PAINT/FRP-1 PAINT SACT-2 --- FRP to 4'-4" A.F.F.
1103 TOILET SV-1 SV-1 COVE CT-5/PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1104 PROCEDURE ROOM (POSPRESSURE)
SV-1 SV-1 COVE PAINT/FRP-1 PAINT PAINT/FRP-1 PAINT/ FRP-1 SACT-2 --- FRP to 4'-4" A.F.F.
1105 PROCEDURE HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---
1106 TRADITITIONAL HEALING CT-1 WOOD PAINT PAINT PAINT PAINT EXPOSED WOOD/GYP. BD.
---/ PAINT
1107 JAN. SV-1 SV-1 COVE FRP-2 FRP-2 FRP-2 FRP-2 SACT-2 ---
1110 B.H. HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1111 Storage LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1112 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1113 GROUP THERAPY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1114 PLAY THERAPY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1114A STORAGE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1115 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1116 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1117 B.H. HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1118 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1119 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1120 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1121 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1122 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1123 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1124 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1125 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1126 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1130 WAITING LVT-1/ LVT-2A RB PAINT PAINT PAINT PAINT SACT-3 SACT-3
1131 LAB HALL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1131A SPECIMEN TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1131B SPECIMEN TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1132 STAFF WORK SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1133 DRAW SV-1 SV-1 COVE PAINT/ FRP-1 PAINT/ FRP-1 PAINT/ FRP-1 PAINT SACT-2 ---
1134 LAB SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1135 LAB OFFICE SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1136 IT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1137 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1140 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1141 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1142 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1143 MEETING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1144 MEETING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1145 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1150 OPTICAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1151 WORKROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1152 CONTACTS LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1153 OPTICAL SALES LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1154 OPTICAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1155 OPTICAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1160 H.I.M CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1161 REFERENCE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1162 VISITATION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1170 BILLING HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1171 BILLING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1172 ADMIN OFFICE (ABBY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1173 ADMIN OFFICE (YVONNE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1174 ADMIN OFFICE (AUDREY) LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1175 ADMIN OFFICE (TARA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1176 ADMIN OFFICE (DAN) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1177 BILLING OFFICE (ASHLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1178 HIM OFFICE (ANDREW) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1200 DENTAL WAIT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1201 DENTAL CONSULT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1202 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1202A PAN OPERATOR LVT-1 RB PAINT --- PAINT PAINT SACT-1
1203 DENTAL RECORDS CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1204 DENTAL RECEPTION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1205 PAN LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1207 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1208 STERILIZATION SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1 ---
1209 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1210 LAB SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1 ---
1210A LAB OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1211 DENTAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1212 DENTAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1213 DENTAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1214 DENTAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1215 DENTAL EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1
1216 DENTAL EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1
1217 DENTAL OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1218 DENTAL OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1219 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1220 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1221 MECH ROOM SEAL. CONC. RB PAINT PAINT PAINT PAINT SACT-1 ---
1221A MED GAS SEAL. CONC. RB PAINT PAINT PAINT PAINT SACT-1
1222 LOCKERS LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1223 MECH. SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT
ROOM FINISH SCHEDULE
NO. NAME
FLOOR WALL FINISH CEILING
NOTESFINISH BASE NORTH EAST SOUTH WEST MAT'L FINISH1001 VESTIBULE CT-1 CT-1 PAINT PAINT PAINT PAINT SACT-3
1002 MEETING ROOM CPT-1 WOOD PAINT PAINT PAINT PAINT EXPOSED WOOD
1002A STORAGE CPT-1 RB PAINT PAINT PAINT PAINT SACT-1
1003 REGISTRATION HALL CT-1 WOOD PAINT PAINT PAINT PAINT SACT-4/ GYP. BD./EXPOSED WOOD
---/ PAINT
1004 HALLWAY CT-1/ CT-2 WOOD PAINT PAINT PAINT PAINT SACT-3/ GYP. BD. ---/ PAINT
1005 HALLWAY CT-1/ CT-2 WOOD PAINT PAINT PAINT PAINT SACT-3/ GYP. BD. ---/ PAINT
1006 Hall CT-1 WOOD PAINT PAINT PAINT PAINT SACT-4/ SACT-3/GYP. BD.
---/ PAINT
1007 WAITING CT-1/ CPT-1 WOOD PAINT PAINT PAINT WOOD/ CT-3 EXPOSED WOOD/GYP. DB.
---/ PAINT
1007A HALLWAY CT-1 WOOD PAINT PAINT --- PAINT SACT-1 ---
1007B HALLWAY CT-1 WOOD PAINT PAINT --- PAINT SACT-1 ---
1008 WOMENS TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1009 MOTHERS ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1010 MEN'S TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1011 RE-APPOINT/ PAYMENT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1012 WORK CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1013 CENTRAL REGISTRATION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1014 PRC (ASHLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1015 PRC (MIKALA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1016 PATIENT REG/ CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1017 SWITCHBOARD CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1018 INSURANCE (SHELLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1019 OUTREACH (CHELSEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1020A PHARMACY RETAIL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1020B PHARMACY WAITING LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1021 PHARMACY CONSULT SV-1 RB PAINT PAINT PAINT PAINT SACT-1
1022 PHARMACY CONSULT SV-1 RB PAINT PAINT PAINT PAINT SACT-1
1023 PHARMACY WORK LVT-1 RB PAINT PAINT PAINT PAINT SACT-1/ GYP. BD. ---/ PAINT
1023A PHARMACY OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1
1023B PHARMACY TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1024 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1025 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1026 DATA SV-1 RB PAINT PAINT PAINT PAINT EXPOSED PAINT
1027 LAUNDRY CPT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1028 OFFICE CPT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---
1029 STAFF BREAK ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1030 HOUSEKEEPING SV-1 RB PAINT PAINT PAINT PAINT SACT-2 ---
1031 STAFF MOTHERS ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1033A TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1033B TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1034A HALLWAY LVT-1/ LVT-2 RB PAINT PAINT PAINT PAINT SACT-3
1034B HALLWAY LVT-1/ LVT-2 RB PAINT PAINT/ WOOD PAINT PAINT SACT-3/ SACT-4/GYP. BD.
---/ PAINT
1034C HALLWAY LVT-1/ CT-1 RB PAINT PAINT PAINT PAINT SACT-3
1035 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1036 WAIT LVT-1/ LVT-2A RB PAINT PAINT PAINT PAINT SACT-3 SACT-3
1037 HALL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1037A STAFF WORK LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1038 MAMMO LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1038A VEST. CT-1 CT-1 PAINT PAINT PAINT PAINT SACT-1
1039 RADIOLOGY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1039A CHANGE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1040 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1041 STORAGE SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT
1042 MECH SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT
1043 Bio Hazard SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT
1050 C.H. HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---
1051 AMBULANCE HOLD (negpressure)
SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1052 COMMUNITY HEALTH (JOANNT) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1053 COMMUNITY HEALTH (SHELBY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1054 COMMUNITY HEALTH (CONNIE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1055 COMMUNITY HEALTH(TRANSPORT)
CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1056 C.H. Work Room LVT-1 RB PAINT PAINT PAINT PAINT SACT-1
1057 COMMUNITY HEALTH(STEPHANIE)
CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1058 COMMUNITY HEALTH (GINA HE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1059 COMMUNITY HEALTH (THERESA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1060 COMMUNITY HEALTH (BRENDA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1061 C.H. HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---
1062 COMMUNITY HEALTH CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1063 COMMUNITY HEALTH CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1064 COMMUNITY HEALTH CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1065 NURSE SUPERVISOR (BETTY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1070 EXAM HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---
1070A STAFF TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---
1071 CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---
1072 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1073 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1074 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1075 FLEX OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1
1076 SCALE LVT-2A RB PAINT PAINT PAINT PAINT SACT-1
1077 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1078 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1079 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1080 EXAM HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---
1081 TRIAGE (NEG PRESSURE) SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1082 EXAM (NEG PRESSURE) SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1083 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1084 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1085 SCALE LVT-2A RB PAINT PAINT PAINT PAINT SACT-1
1086 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1087 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
1088 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^aa O OMOMLMULNU
2AD
D
PROVIDEROFFICE1094A
PROVIDEROFFICE1094B
NURSE1094
8'-
0"
8'-
0"
CL
1'-
10
"
CL
1'-0"
CL
5'-4"
45°
5'-1"
1094B
10
94
A
7A
5A
5A
5A
5A
5A
2A
CL
1'-0"
CL
1'-
4"
HM
-W7
10
94
11'-5 7/8"
1'-
3 5
/16
"
1'-3 5/16"
SOILED1092
MED1093
STAFFTOILET1070A
A7.3
7
A7.3 8
A7.3 9
7'-5"
7'-
1"
9'-
0"
7'-
1"
9'-5"
7B
5B
7B
5A
5B
5A
5A
5A
10
70
A
4A
4A5A
5A 4A
5A
1093
2'-
4"
4'-
9"
1092
7B
F.E.C.
A7.3
14
11
12
13
CLR4"
2'-0"
4A
(OPEN)
2'-0"2'-0"3'-0"1'-9"
2'-6" 3'-3" 3'-0"
2'-
0"
2'-
0"
LOCKINGPLAM UPPERCABS
GARAGE CANS, BY OWNER
7
A7.8
9
A7.8
1
A7.8
PAPER TOWEL& SOAP DISP.
PLAM CTOP, B.SPLASH& S.SPLASH
FRIDGEBY OWNER
3'-
0"
1'-6" 2'-6"
(open)PLAMBASE CABS
3'-
0"
6
A7.8
7
A7.8
PLAM CTOP& B.SPLASH& S.SPLASH
PAPER TOWEL& SOAP DISP.
FILLER
2'-9" 1'-3"
FILLER
3'-
0"
2'-
0"
2'-
0"
FILLER 2'-9" 1'-3" FILLER
15" DP.PLAM UPPERS
1
A7.8
24" DP.PLAM BASECABS
PLAM CTOP, B.SPLASH& S.SPLASH
7
A7.8
6
A7.8
WATERCOOLER
SOAP &PAPER TOWELDISP.
A7.3
10
A7.314
A7.3 16
15
11
12
13
TRIAGE(NEG
PRESSURE)1081
TOILET1035
SCALE1076
coat hook
7'-
8 1
/2"
7'-
9 1
/16
"7
'-8
1/2
"
1081
1035
12'-0"
7'-2" 4'-10"
8'-0" CLR
5A
5A
7A
5A
5A
5A 5A
7A
5A
WALL MOUNTEDEQUIP.BY OWNER
MODULARCASEWORKSYSTEMUPPER, BY OWNER
PAPERTOWEL &SOAP DISP.
MODULARCASEWORKSYSTEM CTOPW/ SINK &BASE CAB, BY OWNER
5'-0"
6"
RUB RAIL- COORDINATEHEIGHT W/ CHAIR BACK HEIGHT
2AD
D
2AD
D
GRABBARS
LINE OFCT WAINSCOT, SEE TYPICALWALL FINISHDETAIL 18/A7.1
TOILET PAPERDISP.
COAT HOOK
LINE OFCT WAINSCOT, SEE TYPICALWALL FINISHDETAIL 20/A7.1
LINE OFCT WAINSCOT, SEE TYPICALWALL FINISHDETAIL 20/A7.1
SOAP & PAPERTOWEL DISP.
GRABBAR
MIRROR
LINE OFCT WAINSCOT, SEE TYPICALWALL FINISHDETAIL 20/A7.1
PIPE WRAP, TYP.
2'-8"3'-0"1"
PLAM CTOP& B.SPLASH
24" PLAM BASE CABS
SCALE,BY OWNER
FILLER
6
A7.8
3'-
0"
3'-0" 3'-0"
15" DP.PLAM UPPERCABS
PLAM CTOPW/ B.SPLASH
24" DP. PLAMBASECABS
7
A7.8
6
A7.8
1
A7.8
FILLER 2'-0" 3'-0" FILLER
3'-
0"
2'-
0"
2'-
0"
FILLER
SOAP & PAPER TOWELDISP.
A7.3
22
21
20
23
EXAM1083 9'-6"
11
'-7
"
10
83
CLR
1'-6"
A7.3
17
18
19
C.H. WorkRoom1056 13'-8"
9'-
2"
10
56
5B
5B
7B
5B
COPIER, B.O.
15" DP.PLAM UPPERCABS
PLAM CTOPW/ B.SPLASH
24" DP. PLAMBASECABS
FILLER3'-0"2'-6"2'-6"
2'-
0"
2'-
0"
3'-
0"
2'-6" 2'-6" 3'-0" FILLER
2
A7.8
6
A7.8
24" DEEP ADJ.
MEALAMINE
SHELVES ON
HEAVY DUTYBRACKETS &
STANDARDS
COATHOOK
WALL MOUNTEDEQUIP.BY OWNER
MODULARCASEWORKSYSTEM,BY OWNER
2'-0" 1'-0"1 1/2"
2'-0"
SOAP &PAPER TOWELDISP.
MODULARCASEWORKSYSTEM,BY OWNER
2AD
D
2AD
D
WALL MOUNTEDEQUIP.BY OWNER
RUB RAIL-COORDINATE HEIGHTW/ CHAIR BACK HEIGHT
6"
4'-6"
24" DEEP ADJ.
MEALAMINE
SHELVES ON
HEAVY DUTYBRACKETS &
STANDARDS
FILLER
3'-0" 1" 3'-0" 3'-0"
(open)
EYEWASH AT SINK, EXTRA DEEP SINK SINGLE POCKET
PLAM CABS W/LOCKS
1'-6 15/16"
7'-
0"
23
A7.81" 3'-0" 3'-0" 1'-3" FILLER
1
A7.8
3'-
0"
SOLID SURFACECTOP,B.SPLASH& S.SPLASH
24" DP.PLAM BASECABS W/ LOCKS
7
A7.8
6
A7.8
SOAP &PAPER TOWELDISP.
SV COVEBASE
5"
METAL TRIMTYPE C
METAL TRIMTYPE B
6 ROWS CT-5
24" X 36"MIRROR
PIPE WRAP, TYP.
PAINT
SV COVEBASE
METAL TRIMTYPE C
METAL TRIMTYPE B
6 ROWS CT-5
GRAB BARS
PAINT
5"
SOAP &PAPER TOWEL DISP.
TOILETPAPERDISP.
(fridge)
2'-
10
"
3'-
0"
1'-6" 2'-1"
3/4"
3'-0" 1 1/2"1'-6"
2'-
0"
2'-
2"
2'-
0"
2'-9" 2'-6" 3'-0" 1 1/2"
PLAM CTOPW/ WATERFALLEDGE, B.SPLASH& S.SPLASH
24" DP.PLAM BASE CABS/DRAWERS
6"4"
15" DP.PLAM UPPERCABS
2
A7.8
9
A7.8
7
A7.8
60" MIN. CLR
5'-2" 2'-0" 2'-6" 2'-6"1 13/16"
PLAM TALLCABS W/ADJUST. SHELVING,LOCKING
2'-
6"
4'-
2"
24
A7.8
2 13/16"
1"
2'-6" 1'-3" 3'-0"
1" 60" MIN. CLR
5'-2"
3'-
0"
PLAM
CTOP &
B.SPLASH
24" DP. PLAM BASE
CABS
7
A7.8
6
A7.8
9
A7.8
PAPER TOWEL
& SOAP DISP.
A7.326
A7.3 28
29
30
27
PROCEDUREROOM (POSPRESSURE)
1104
TOILET1103
PROCEDUREROOM (POSPRESSURE)
1102
16'-0" 7'-8" 16'-0"
9'-
0"
2'-
4"
11
04
11
02
1103A1103B
CLR
4'-0"A7.3
34 CLR
4'-0"
7A
5A
7A
5A
5A
5A
7A
5A
A7.3 26
F.E.C.
1 9/16"
2'-6"2'-0"2'-6"
1 9/16"
PLAM TALLCABS W/ADJUST. SHELVING,LOCKING
4'-
2"
2'-
6"
24
A7.8
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
Rebecca J Lewis, FAIA, FACHA, CID
1301056849
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
8/20/2020 3:30:29 PM
018131.00
JMD
RJL
07/06/2020
Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715
A7.3
Enlarged Plans& InteriorElevations-Clinical
1/4" = 1'-0"1
Enlarged Nurse Station1/4" = 1'-0"
2Enlarged Support Areas
1/4" = 1'-0"7
Med Room1/4" = 1'-0"
8Soiled East
1/4" = 1'-0"9
Nurse Sink
1/4" = 1'-0"4
Scale and Triage
1/4" = 1'-0"10
Triage
1/4" = 1'-0"11
Typ Toilet Elevation1/4" = 1'-0"
12Typ Toilet Elevation
1/4" = 1'-0"13
Typ Toilet Elevation1/4" = 1'-0"
14Typ Toilet Elevation
1/4" = 1'-0"15
Scale North1/4" = 1'-0"
16Scale East
1/4" = 1'-0"3
Typical Exam Room
1/4" = 1'-0"5
C.H. Work Room
1/4" = 1'-0"17
C.H. Work North1/4" = 1'-0"
18C.H. Work East
1/4" = 1'-0"19
C.H. Work South
1/4" = 1'-0"20
Typical Exam Room North1/4" = 1'-0"
21Typical Exam Room East
1/4" = 1'-0"22
Typical Exam Room South1/4" = 1'-0"
23Typical Exam Room West
1/4" = 1'-0"24
Clean East1/4" = 1'-0"
25Clean South
1/4" = 1'-0"26
Procedure Room1/4" = 1'-0"
27Proc. Tlt North
1/4" = 1'-0"29
Proc. Tlt South1/4" = 1'-0"
28Proc. Tlt East
1/4" = 1'-0"30
Proc. Tlt West
1/4" = 1'-0"31
Group Therapy1/4" = 1'-0"
32B.H. Hall West
1/4" = 1'-0"33
B.H. Hall East1/4" = 1'-0"
6Procedure Room
1/4" = 1'-0"34
Hall Storage
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^aa O OMOMLMULOM
GENERAL ELEVATION NOTES:1. PROVIDE FINISHED FACE ON ALL EXPOSED SIDES OF CASEWORK.2. SEE SHEET A7.9 FOR TYPICAL MOUNTING HEIGHTS FOR FIXTURES & TYPICAL TOILET ROOM ACCESSORIES.3. PROVIDE IN-WALL BLOCKING FOR ALL WALL MOUNTED ITEMS.
ADD 2 2020/08/20
STANDARD WALLMOUNT SWIVEL MIRROR
STANDARD WALLMOUNT SWIVEL MIRROR
T ectonic Cop yright 2007
A7.1
4
3
OUTREACH(CHELSEY)
1019
INSURANCE(SHELLEY)
1018
SWITCHBOARD1017
CENTRALREGISTRATION
1013
WORK1012
RE-APPOINT/PAYMENT
1011
PRC(ASHLEY)
1014
PRC(MIKALA)
1015PATIENT
REG/CONSULT
1016
REGISTRATIONHALL1003
HALLWAY1005
HALLWAY1004A7.6
3
A7.64
A7.6 5
A7.6 8
A7.6 10
A7.6
2
7
9
A7.6 11
6
10
19
A
10
18
A1
01
8
10
19
10
17
10
16
10
15
10
14
10
14
A
10
15
A
1016A
11" 4'-0" 1'-0" 4'-0" 1'-0" 4'-0" 1'-4 1/2" 9'-6 3/4" 6 3/4" 4'-3 1/2"
18
17
1'-6" 4'-0"
CL
6'-0" 4'-0" 1'-4 1/2" 9'-6 3/4" 14'-11 5/16" 1'-1"
1020
9'-4" 10'-4"
CLR
3'-7" 2'-5" 2'-7"
CLR
5'-4 15/16" 2'-5" 2'-6"
9'-4" 10'-4" 12'-11 9/16"
7A
7A
5A
7A
5A
5A
7A
5C
7A
5C
7A
5C
5C
5C7D
5C
7A
7A
5A
7A
5A
5A
5A
5A
5A
90°
90°
5A
7A
7A
10
02
7A
5A
5A7A
7A
5A
5A
7F
5C
5F
4A
5F
5A5A7A
90°
90°
1011
6'-9 3
/16"
1200 2'-
2"
1'-
9"
5F
6A6.1
A7.712
7'-
4"
12
'-0
"9
'-6
3/4
"6
'-5
1/4
"1
2'-
0"
7'-
4"
7'-
0"
4'-
6"
2'-
5 5
/8"
2'-5 5/8"
4'-
11
7/1
6"
6'-11 11/16"
6'-11 5
/8"
6'-10"
9'-5"
5'-
8 1
3/1
6"
8'-7 1
/4"
5'-
1 1
5/1
6"
7'-4 3/8" 2'-11 5/8"
2'-
1"
7'-
2 1
/4"
2'-1"
135°
135°
9'-
6 1
/4"
7'-0"6'-1
1 5/8
"
135°135° 1'-10 1/2"
6'-9 1
/8"
11
39
135°
4 7
/8"
4 3
/8"
A7.6
6
8 5/8"
1'-0 11/16"
17
A7.7
A7.6
13
3'-
4 1
3/1
6"
3'-
4 1
/4"
5A
5A A7.6
12
A7.6
12Sim
5A
A7.6
14
6'-
2"
4'-10 5/8"
4A
A7.6
17
A7.6
13Sim
WCG
WC
G
WCG
WCGWCG
WCGWCG
WCG
WCGWCG WCG WCG WCG
A4.2
5
A4.2
5
WCG
A7.6
18
17
A7.7
Sim
15
'-4
3/4
"
10'-1 11/16" 11 11/16"
21
A7.6
F.E.C.
A7.6
22
WOODFAUX
COLUMNS W/LIGHT
INSET AREAW/BASKETWEAVE
VENEER
WOODBASE
TOBACCOBOWL, BY OWNER
GLASS SHELVES
WOODTRIM
2- TIER GYP. BD. SOFFIT W/ LIGHTCOVE & RECESSED COILING DOOR
OPEN OPENSOLID SURFACECTOP
CURVED SOLID SURFACECTOP W/WATERFALLFACE
CT-3 MOSAIC
WOOD BASE
15
A7.6
16
A7.6
3
A4.2WOODTRIM
1'-6"
BASKETWEAVEVENEER
SOLIDWOOD
17
A7.7
6"
17
A7.7
Sim4'-5 3/8" 4'-5 3/8"3'-0" 3'-0"6"
15
A7.6
16
A7.6
1'-6"1'-6"
TYP
.
3'-
8"
3'-
4"
1110A
WOOD FRAMED DECORATIVE RESIN PANEL (RP-1) WINDOWSW/ 1X4 WOOD CASING
TYP.
3'-8"
21
A7.1
Sim
1020 1024
5'-
4"
typ.
1'-
8"
typ.
3'-8" WOOD FRAMED DECORATIVE RESIN PANEL (RP-1) WINDOWSW/ 1X4 WOOD CASING
21
A7.1
15
A7.6
16
A7.6
3
A4.2
24" dp.PLAM DRAWERS
SOLIDSURFACECTOP, PROVIDE FIELDINSTALLED GROMMETSIN WORKSURFACE TOP
PLAM PANEL
1'-6"
FILLER
FILEFILE
FILLER
1'-6"
SOLID WOODTRIM
5'-9 15/16"5'-9 15/16" 6"
BASKETWEAVEVENEER
GLASS PANEL
10
A7.810
A7.8
15
A7.616
A7.6
BASKET WEAVEVENEER, WRAPS WALLON (4) SIDES
WOOD VENEERPANEL W/ SOLIDWOOD TRIM
WOOD VENEERPANEL W/ SOLID WOODTRIM
WOOD BASE
3/8" CLEARTEMPEREDGLASSPANEL
RECESSEDCOILING DOOR
3'-2" 1'-3 1/2"
20
A7.6
21
A7.6
BASKETWEAVEWOODVENEER
3'-
0"
2'-6" 1'-3" 2'-6"
SOLID SURFACECTOP, B.SPLASH& S.SPLASH
24" DP. PLAM CASEWORK
1X3 WOODPERIMETERTRIM
9
A7.8
file
6
A7.8
PLAMCTOP, B.SPLASH& S.SPLASH
24" DP. PLAM CASEWORK
15" DP. PLAM UPPERCABS
FILLER 2'-6" 1'-3" 2'-6" FILLER
3'-
0"
1'-
6"
2'-
6"
FILLER 3'-3" 3'-3" FILLER
2
A7.8
6
A7.8
9
A7.8
6"
2'-
6"
1'-
0"
1'-6" 1'-6"
FILLER
24" dp.PLAM DRAWERS
SOLIDSURFACECTOP, PROVIDE FIELDINSTALLED GROMMETSIN WORKSURFACE TOP
PLAM PANEL
15
A7.6
16
A7.6
10
A7.8
1011
3'-
0"
1'-3" 3'-0" 1'-3"
BASKETWEAVEWOODVENEER
SOLID SURFACECTOP, B.SPLASH& S.SPLASH
24" DP. PLAM CASEWORK
1X3 WOODPERIMETERTRIM
9
A7.8
file
6
A7.8
file
SOLID SURFACECTOP
CURVED SOLID SURFACECTOP W/WATERFALLFACE
CT-3 MOSAIC
WOOD BASE
RECESSEDCOILING
DOOR IN GYP. BD.SOFFIT
1011
15
A7.6
16
A7.6
WOODCOLUMN WRAP,SEE PLAN DETAIL
WOODCOLUMN WRAP,SEE PLAN DETAIL
WOOD CORNERGUARD, SEE DETAIL
WOOD CORNERGUARD,
SEE DETAIL
4'-0" 4'-4 3/8"
1'-8"
3/8" FIBERGLASS
BULLET RESISTANT PANEL
5/8" TILE
BACKER BOARD
CT-3 MOSAIC OVER
THIN MORTAR BED
1/4" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
3/4" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
2'-0"
PLAM OVER 3/4" PLYWOOD
PANEL
(PROVIDE REMOVEABLE BACK
PANEL
SECTION FOR ELEC. ACCESS)
RESILIENT
BASE
CTOP
SUPPORT
BRACKETS
AS REQ'D
SOLID SURFACE
CTOP W/
EASED EDGES
& FIELD INSTALLED GROMMETS
VARIES-SEE PLAN
1'-
7 1
/4"
1X WOOD BASE
W/ EASED EDGE, TYP.
2X4 FR WOOD
STUDS @ 16" O.C.
2X FR WOOD
FRAMING
1 1
/2"
1/2" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
2'-
6"
STRAIGHT
CTOP (WHERE OCCURS, SEE
ELEV & PLAN)
(3/4" SOLID SURFACE
MATERIAL OVER SUBSTRATE)
3"
VARIES
5 1
/2"
3'-
0"
3'-
6"
2'-1 5/8"
2'-0" 1'-0"
6"
2'-
6 1
/16
"
3'-
0 1
/16
"
3"
3/8" FIBERGLASS
BULLET RESISTANT PANEL
5/8" TILE
BACKER BOARD
CT-3 MOSAIC OVER
THIN MORTAR BED
3/4" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
PLAM OVER 3/4" PLYWOOD
PANEL
(PROVIDE REMOVEABLE BACK
PANEL
SECTION FOR ELEC. ACCESS)
RESILIENT
BASE
SOLID SURFACE
CTOP W/
EASED EDGES
& FIELD INSTALLED GROMMETS
1X WOOD BASE
W/ EASED EDGE, TYP.
2X4 FR WOOD
STUDS @ 16" O.C.
1/2" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
PLAM CAB BEYOND
1/4" SOLID SURFACE
PANEL OVER 3/4" PLYWOOD
SUBSTRATE
4 7/8"
2'-1 5/8"
1'-
0"
1'-0"
2-1/2" METALSTUD FRAMING
STRUCTURALCOLUMN
3/4" WOOD VENEERPLYWOOD
WALL- SEE PLAN FOR TYPE
WALL- SEE PLAN FOR TYPE
5/8" GYP. BD. (OFFICE SIDE)
3/4" WOODVENEER PLYWOOD
3/4" WOODVENEER PLYWOOD
STRUCTURALCOLUMN
2-1/2"METAL STUDFRAMING
RECESSEDROLLING DOORFRAME - VERIFY INSTALLATIONREQUIREMENTS W/MANUFACTURER'S INSTRUCTIONS
WALL- SEE PLAN FOR TYPE
1'-
3"
1'-5 1/4"
1'-5 1/4"
7 1/4"
1'-
3"
3/4"WOODVENEERPLYWOOD
RECESSEDROLLING DOORFRAME- VERIFYINSTALLATIONREQUIREMENTSW/ MANUFACTURER'SINSTRUCTIONS
WALL, SEE PLAN FOR TYPE
2-1/2"METAL STUD FRAMING
3-5/8"METAL STUD FRAMING
1-5/8"METAL STUD FRAMING
1'-
4"
3 3/4"
1'-2"
3/4"WOODVENEERPLYWOOD
WALL- SEE PLANFOR TYPE
1-5/8" METALSTUD FRAMING
2 1/2"
2 1
/2"
1X SOLID WOODTRIM, MITEREDCORNER W/EASED EDGES @OUTSIDE CORNEROF WALL
VERIFY WALLANGLE
NOTE: LOCATIONS NOTED ON FLOOR PLAN W/ " " SYMBOL & "WCG" NOTATION
1'-
3"
WALL- SEEPLAN FOR TYPE
WALL- SEEPLAN FOR TYPE
1-5/8" METALSTUD FRAMING
5/8" GYP. BD.(OFFICE SIDE)
5/8" GYP. BD.(OFFICE SIDE)
STRUCTURALCOLUMN
3/4" WOODVENEERPLYWOOD
1'-
10
1/2
"2
'-6
"3
'-7
1/2
"
DESK TRANSACTION TOP,SEE DESK DETAILS
DESK CTOP,SEE DESK DETAILS
1x SOLID WOOD
3/4" WOOD VENEERPLYWOOD
1x SOLIDWOOD
2X WOODSTUD FRAMING
2X WOODSTUD FRAMING
GYP. BD.SOFFIT
3/8" TEMPEREDCLEAR GLASS
RECESSED METALGLASS CHANNEL
RECESSED METALGLASS CHANNEL
1X SOLID WOODBASE
3/4" WOOD VENEERPLYWOOD
6"
6"
DESK TRANSACTION TOP,SEE DESK DETAILS
DESK CTOP,SEE DESK DETAILS
2'-
6 3
/4"
3'-
6 3
/4"
1'-
10
1/2
"
1x1 SOLID WOOD
3/4" WOOD VENEERPLYWOOD
1x1 SOLIDWOOD
2X WOODSTUD FRAMING
2X WOODSTUD FRAMING
GYP. BD.SOFFIT
1X SOLID WOODBASE
3/4" WOOD VENEERPLYWOOD
3/4"PLYWOOD W/BASKETWEAVEVENEER
2'-
6"
25" DP. PLAM CTOPON SUPPORTBRACKETS ASREQ'D. PROVIDEUP TO 4 FIELD INSTALLEDGROMMETS
8
A7.8
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
Rebecca J Lewis, FAIA, FACHA, CID
1301056849
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
8/20/2020 3:30:31 PM
018131.00
JMD
RJL
07/06/2020
Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715
A7.6
Enlarged Plans& InteriorElevations-Registration
1/4" = 1'-0"1
Reception
1/4" = 1'-0"4
Registration Hall- West
1/4" = 1'-0"2
North Hallway-North1/4" = 1'-0"
3South Hallway-South
1/4" = 1'-0"5
Registration East
1/4" = 1'-0"6
Registration-North (South Mirr.)1/4" = 1'-0"
7Registration-West
1/4" = 1'-0"8
Work East1/4" = 1'-0"
9Reappoint-West
1/4" = 1'-0"10
Reappoint-East1/4" = 1'-0"
11Reappointment
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^aa O OMOMLMULOM
1 1/2" = 1'-0"15
Desk Section 11 1/2" = 1'-0"
16Desk Section 2
GENERAL ELEVATION NOTES:1. PROVIDE FINISHED FACE ON ALL EXPOSED SIDES OF CASEWORK.2. SEE SHEET A7.9 FOR TYPICAL MOUNTING HEIGHTS FOR FIXTURES & TYPICAL TOILET ROOM ACCESSORIES.3. PROVIDE IN-WALL BLOCKING FOR ALL WALL MOUNTED ITEMS.
1 1/2" = 1'-0"12
Wood Column Wrap Detail1 1/2" = 1'-0"
13Column Wrap Detail @ Desk
1 1/2" = 1'-0"14
Faux Column Detail @ Desk
1 1/2" = 1'-0"17
Faux Column Detail 21" = 1'-0"
19Wood corner guard detail
1 1/2" = 1'-0"18
Wood Column Wrap Detail 21" = 1'-0"
20Section Thru Privacy Divider
1" = 1'-0"21
Section Thru Privacy Divider 2
1/4" = 1'-0"22
Switchboard
2AD
D
08-20-20 EDI-Dolejs, Inc. # 19-002
Bay Mills Health Center ADDENDUM TWO- 1
MECHANICAL/ELECTRICAL ADDENDUM TWO
DIVISION 23 – HEATING, VENTILATION, AND AIR CONDITIONING
CHANGES TO THE PROJECT MANUAL: Section 23 09 93 – SEQUENCE OF OPERATIONS FOR HVAC CONTROLS
1. Add the following:
3.19 DENTAL HOOD
A. The system consists of a hood with integral blower motor controls.
B. The transfer/make-up air duct shall include a motorized damper in the duct. The damper shall open when the hood is ON and closed when the hood is OFF.
1. The BAS shall provide an output open the motorized damper when the hood blower is ON.
2. The BAS shall monitor hood status. 3. Points list.
Item Monitor Control Function Type Indication
1 X Hood blower Status DI ON/OFF
2 X Hood Transfer Duct Damper DO OPEN/CLOSED
CHANGES TO THE MECHANICAL DRAWINGS: Drawing M4.2 – FIRST FLOOR PLAN NORTH – HVAC: (Reissued)
1. Add existing relocated Lab Hood. 2. Relocate 28/16 & 18/14 Transfer ducts. 3. 14/12 Transfer ducts have been added between Hallway 1034C and Hallway 1140, and
between Hallway 1141 and Hall 1006. Drawing M6.1 – MECHANICAL SCHEDULES: (Reissued)
1. Air Handling Unit schedule has been revised. 2. VAV / Reheat Coil Terminal Unit Schedule has been revised.
BIDDER QUESTIONS:
1. Question: Spencer Dohms – IMMEL Construction: What pressure classification does the ductwork downstream of the VAV’s need to be built to? 2” W.G.?
Answer: Ductwork downstream of the VAV shall be low pressure classification and positive 2” inch wg. Refer to specification 23 31 13, 3.9, Duct Schedule.
DIVISION 26, 27, 28 – ELECTRICAL CHANGES TO THE PROJECT MANUAL: Section 26 7111 – DIGITAL ADDRESSABLE FIRE ALARM SYSTEM
08-20-20 EDI-Dolejs, Inc. # 19-002
Bay Mills Health Center ADDENDUM TWO- 2
1. Delete 2.1.B in its entirety.
2. Revise 2.5.C.3 to read as follows: “Duct Housing Enclosure: NEMA 250, Type 1;
NRTL listed for use with supplied detector for smoke detection in HVAC system
ducts.”
Section 28 1500 – ACCESS CONTROL HARDWARE DEVICES
1. Revise 1.2.A.4 to read as follows: “System shall be Lenel On-Guard Enterprise Series.” 2. Delete 1.2.B in its entirety.
Section 28 2313 – VIDEO SURVEILLANCE CONTROL AND MANAGEMENT SYSTEMS
1. Delete 1.1.B.1 in its entirety. 2. Delete 1.1.B.2 in its entirety. 3. Delete 1.3. in its entirety. 4. Revise 2.1.B.2.f to read as follows: “Operating System: Windows 10 Professional, A 64-
bit operating system.” 5. Revise 2.2.C.7 to read as follows: “Operating System: Windows 10 Professional, A 64-bit
operating system.” 6. Add 2.2.C.8 as follows: “Provide one(1) Video Management System station. Coordinate
location of computer with Owner prior to installation.” 7. Revise 2.4.D to read as follows “The NVMS basis of design is the Avigilon Control Center
(ACC) version 7. The design and performance requirements for the NVMS software are as follows:”
8. Revise 2.4.D.2.a to read as follows: ACC 7 “Enterprise” Edition Supporting:
CHANGES TO THE ELECTRICAL DRAWINGS: Drawing E0.1 – TITLE SHEET - ELECTRICAL: (Reissued)
1. Add nurse call symbols to Symbol Legend. Drawing E2.1 – FLOOR PLAN – SOUTH - LIGHTING: (Reissued)
2. Revise plan note #2. 3. Revise plan note #3. 4. Revise plan note #5.
Drawing E2.2 – FLOOR PLAN – NORTH - LIGHTING: (Reissued)
1. Revise plan note #2. 2. Revise plan note #3. 3. Revise plan note #5.
Drawing E4.1 – FLOOR PLAN – SOUTH – SYSTEMS: (Reissued)
1. Add Nurse call system locations. Drawing E4.2 – FLOOR PLAN – NORTH – SYSTEMS: (Reissued)
1. Add Nurse call system locations.
Drawing E6.3 – SCHEDULES – ELECTRICAL
1. Refer to panel H1 – Revise circuit breaker for AHU1-RF from 20/3 to 25/3.
08-20-20 EDI-Dolejs, Inc. # 19-002
Bay Mills Health Center ADDENDUM TWO- 3
Drawing E7.3 – DETAILS - ELECTRICAL: (Reissued)
1. Delete detail 4/E7.3 in its entirety. 2. Delete detail 5/E7.3 in its entirety. 3. Delete detail 8/E7.3 in its entirety. 4. Add detail 12/E7.3 – “Communications Riser Diagram”.
BIDDER QUESTIONS:
1. Question: Ryan Sharp – Wolverine Power: This is from the spec:
i. Noise Emission: Comply with applicable state and local government requirements with 60dB at 50 feet for maximum noise level, due to sound emitted by generator set including engine, engine exhaust, engine cooling-air intake and discharge, and other components of installation.
ii. This will have all of the generator manufacturers quoting to get a custom enclosure priced which will add a large cost to the project for the owners – on average all of the manufacturers L2 enclosures will be in the 68.4 dBA @ 50 Ft.
iii. Will the manufacturer L2 dBA average listed be acceptable or will we need to quote a custom enclosure for the system?
Answer: The specification requires Level 3 enclosure due to the proximity and sensitivity of the neighbors nearby. Please provide as specified.
2. Question: Spencer Dohms – Immel Construction: Heat trace is indicated on the underground storm, is this required?
Answer: Per the Contract Documents, Yes. APPROVED MANUFACTURER SUBSTITUTIONS: Naming below does not guarantee approval, substitutions must meet requirements of the specifications and plans. Section: Item: Manufacturer:__________________ 26 0924 Local Low Voltage Lighting Control Hubbell Control Solutions 26 0926 Relay Based Lighting Controls Hubbell Control Solutions 26 3213 Engine Generators Generac Industrial 26 3602 Transfer Switchgear Generac Industrial 26 5100 LED Interior Lighting A- Columbia AE - Columbia B - Columbia BE - Columbia C4 - Columbia C4E - Columbia C8 - Columbia C8E - Columbia D1 – Prescolite D1E - Prescolite E1 – Dual-lite E2 - Dual-lite G – Columbia
08-20-20 EDI-Dolejs, Inc. # 19-002
Bay Mills Health Center ADDENDUM TWO- 4
H – Columbia HE - Columbia J2 – Litecontrol J4 – Litecontrol J4E – Litecontrol J4F – Litecontrol J15F - Litecontrol K - Columbia KE – Columbia L4 – Insight L5 – Insight L12 – Insight L24 – Insight M5 – Litecontrol N7 - Litecontrol RE – Newstar W2 – Litecontrol W4 – Litecontrol W6 – Litecontrol W11 – Litecontrol 26 5619 LED Exterior Lighting AA – Beacon BB - Beacon CC – Newstar DD - Hubbell EE - Hubbell
FF – Hubbell GG - Insight
HH – Insight JJ – Forum JJE – Forum LL - Insight 26 7111 Digital Addressable Fire Alarm System Notifier 28 1500 Access Control Honeywell, Vicon 28 2313 Video Surveillance EqacqVision, Digital Watchdog, Vicon END OF MECHANICAL/ELECTRICAL ADDENDUM TWO
19-002 / Bay Mills Health Center 28 70 00 - 1 DOOR ENTRY COMMUNICATION SYSTEM
SECTION 28 70 00 - DOOR ENTRY COMMUNICATION SYSTEM
PART 1 - GENERAL
1.1 SECTION INCLUDES
A. Integrated door entry security and communication system.
1.2 REFERENCES
A. ISO 9001:2000 – Quality Management Systems – Requirements. B. TIA/EIA 568 – Commercial Building Telecommunications Cabling Standard.
1.3 SYSTEM DESCRIPTION
A. Components:
1. Door stations. Model AX-DVF with surface back box Model SBX-AXDVF. 2. Master Stations: Connect a maximum of seven 16-call add-on selectors Model AX-8MV. 3. Central Exchange Units (CEU): Connect a maximum of 3 add-on exchange units Model AX-
248C. 4. Power supply. Model PS-2420UL 5. Other External Connections:
a. Access control system. b. Video output.
B. Calling Master Station from Door Station and Communicating:
1. Priority Levels for Calls from Door Stations:
a. Normal. b. Priority.
2. Press door station CALL button. 3. Calling tone rings on master station (for normal call, intermittent tremolo sound; for priority call,
rapid intermittent tremolo sound) and selector button LED for individual door station flashes (double-flash for priority call). If door station has camera, video from door station shall be displayed on master station monitor. Call tone continues to ring until answered or is timed out (based on setting). You can stop calling tone by pressing OFF button.
4. If you press individual door station selector button, LED stops flashing and stays lit and you can talk hands-free to that station. If only TALK button is pressed to answer call, hands-free communication initiates with door station at highest priority call. Talk LED lights when you talk and goes off as you listen to caller.
5. Press OFF button again to end communication. Call also ends automatically when set talk limit is reached.
6. If you hold down TALK button for a minimum of 1 second, communication switches to press-to-talk mode. Hold down TALK button to talk and release to listen to caller. You cannot switch back from press-to-talk communication to hands-free communication.
19-002 / Bay Mills Health Center 28 70 00 - 2 DOOR ENTRY COMMUNICATION SYSTEM
7. If other master station presses selector button of in-use door station or in-use master station, busy signal is heard at master station.
8. Microphone is muted while you hold down privacy button on master station while in communication.
9. You can connect footswitch and use it the same manner as TALK button. 10. Master station can display calls up to 8 stations at the same time. If there are more than 8
incoming calls, they will be displayed in order of priority and time of call. 11. You can adjust calling tone, transmit volume, and receive volume with volume controls at bottom
of master station. 12. You can use a headset (not included in system) instead of built-in master station’s speaker and
microphone.
D. Calling Master Station from Another Master Station and Communicating:
1. Press individual selector button of master station. 2. Pre-tone sounds both master stations and starts hands-free communication. Talk LED lights
when you talk and goes off as you listen to caller. 3. Press OFF button to end communication. You can end call from either master station. Call also
ends automatically when set communication end time is reached. 4. If called master station has privacy mode set (privacy settings button is lit), communication is only
1-way, from calling master station to called master station, and nothing can be heard from called master side. Press TALK button on called master station for a minimum of 1 second. Press-to-talk communication starts. Hold down TALK button to talk and release to listen to caller.
5. You cannot call master station while it is communicating. You will hear a busy signal.
E. Privacy (PRIV) Function:
1. To make master into privacy mode (prevent monitoring from other stations), press privacy button (LED lights up).
2. To cancel privacy mode, press privacy button again (LED goes out). 3. Privacy setting cannot be changed while in communication.
F. CO Line Call from Door Station and Communication:
1. If CALL button is pressed at door station while CO Transfer feature is set (with CO Transfer button lit), call tone rings on master station (for normal call, intermittent tremolo sound; for priority call, rapid intermittent tremolo sound) and selector button LED for individual door station flashes (double-flash for priority call). At same time, telephone call is placed to programmed CO line number.
2. You can communicate with door station from telephone. 3. You can end communication at telephone. Communication also ends automatically when set talk
time limit is reached. About 10 seconds before end of call, you will hear alarm sound on telephone.
4. Maximum duration for CO line call is 300 seconds, even if call timer is set to “Infinite”. 5. Using this function requires Viking Electronics, Inc. “K-1900-5 Hot-Line Pulse Dialer”. 6. If there are multiple calls, call from door station with highest call priority is transferred. 7. Answering at any master station during CO transfer feature will stop CO transfer. 8. There are no functions, such as for door release and dial-in, from telephone.
G. All Call (Normal Master Station Paging):
1. When you press ALL CALL button on master station, all individual master station selector button LEDs flash slowly. You can clear undesired master station from All Call by pressing individual master station selector button with flashing LED, which will turn off LED. Pressing that button again makes that master station part of All Call again and makes LED flash.
19-002 / Bay Mills Health Center 28 70 00 - 3 DOOR ENTRY COMMUNICATION SYSTEM
2. If you press TALK button, send LED lights up and all individual master station selector buttons stop flashing and stay lit. Pre-tone sounds on target master stations and they can be talked to. At this time, you cannot hear audio from other master stations.
3. Press OFF button to end. You can end call for individual master station by pressing its OFF button.
4. All Call announcements do not go to master stations that are in use. 5. During All Call, if you press individual master station selector button on calling master station or
press individual master station selector button or TALK button on 1 of the other master stations, communications switch to hands-free between master stations.
6. There is no function for hands-free reply from called master station during All Call mode. 7. If you press down ALL CALL button but do not start talking within 30 seconds, system goes back
to standby mode. You can also return to standby by pressing OFF button.
H. All Call (Priority Master Station Paging):
1. When you press ALL CALL button on master station, all individual master station selector button LEDs flash slowly.
2. If you press ALL CALL button again, flash rate increases. You can clear undesired master station from All Call by pressing individual master station selector button with flashing LED, which will turn off LED. Pressing that button again makes that master station part of All Call again and makes LED flash.
3. If you press TALK button, TALK LED lights up and all individual master station selector buttons stop flashing and stay lit. Pre-tone sounds on all master stations and all can be called. At this time, you cannot hear audio from other master stations.
4. Press OFF button to end. You can end call for individual master station by pressing its OFF button.
5. Communication of master station being used is cancelled and All Call takes priority. Before communication of master station being used is cancelled, you hear cancel warning sound.
6. During All Call, if you press an individual master station selector button on calling master station or press individual master station selector button or TALK button on one of the other master stations, communications switch to hands-free between those two master stations.
7. There is no function for talk back from master station receiving an All Call announcement. 8. If you press down ALL CALL button but do not start talking within 30 seconds, system goes back
to standby mode. You can also return to standby by pressing OFF button.
I. Monitor:
1. If you press individual door station selector button, you can hear audio and if that door station has a camera, you can see image.
2. Press OFF button to end. Call also ends automatically when set communication end time is reached.
3. While door station is communicating with or monitored by a master station, you cannot monitor that door station from another master station.
4. If you press TALK button while monitoring, hands-free communication mode starts with that door station.
J. Scan Monitor:
1. When scan monitor button is pressed, door stations that have been enabled for “Scan Monitor” in programming can be monitored sequentially for a specified time interval (configured in programming).
2. Monitoring always initiates from target door station with lowest number. 3. If you press scan monitor button while individually monitoring target door station, monitoring starts
with the next door station in line. 4. If you press scan monitor button while monitoring non-target door station, monitoring starts with
the first door station enabled for scan monitoring. 5. Press OFF button to end.
19-002 / Bay Mills Health Center 28 70 00 - 4 DOOR ENTRY COMMUNICATION SYSTEM
6. Communication/video channel 2 is always used for scan monitoring. During scan monitoring, video signal is always outputted from video output port 2 (V2). Scan monitoring is not possible when communication/video channel 2 is being used, even if busy LED is not illuminated.
7. Only one master station at a time can perform scan monitoring. 8. If you press TALK button during scan monitoring, hands-free communication mode starts with
that door station. 9. If you press individual door station selector button or scan monitor button during scan monitoring,
monitoring switches to monitoring individual door station. 10. If master station receives call from door station during scan monitoring, scan monitor function
ends automatically and shall be restarted manually. 11. Scan monitoring continues without limit until it is cancelled, but master station LCD monitor goes
out after 10 minutes. Outside video output continues even with LCD off. If you press scan monitor button with LCD off, LCD lights up again.
12. If you press TALK button during scan monitoring, communication mode starts with door station being monitored.
K. Activating Door Release:
1. Press door release button during communication or monitoring with door station. 2. Door release function will be activated, releasing door lock. 3. You cannot operate door from outside telephone. 4. LED stays lit while door release function is activated. 5. Door release contacts can be set to Normally Open or Normally Closed via program
configuration.
L. Priority:
1. Calls have priority based on the time the call was initiated. (Earlier call has priority over later call).
2. Communication Priority, from Highest to Lowest:
a. Door station, telephone line communication. b. Priority All Call. c. Door station to master station communication. d. Master station to master station communication. e. Normal All Call. f. Monitor. g. Scan monitor.
1.4 SUBMITTALS
A. Comply with Section 01330 (01 33 00) – Submittal Procedures. B. Product Data: Submit manufacturer’s product data, including installation instructions. C. Shop Drawings: Submit the following:
1. Wiring Diagrams: Indicate wiring for each item of equipment and interconnections between items of equipment.
2. Include manufacturer’s names, model numbers, ratings, power requirements, equipment layout, device arrangement, complete wiring point-to-point diagrams, and conduit layouts.
D. Installation and Operation Manuals:
1. Submit manufacturer’s installation and operation manual, including operation instructions and component wiring diagrams.
19-002 / Bay Mills Health Center 28 70 00 - 5 DOOR ENTRY COMMUNICATION SYSTEM
2. Provide detailed information required for Owner to properly operate equipment.
E. Warranty: Submit manufacturer’s standard warranty.
1.5 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: ISO 9001:2000 certified company.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Delivery: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
B. Storage: Store materials in clean, dry area indoors in accordance with manufacturer’s instructions. C. Handling: Protect materials during handling and installation to prevent damage.
1.7 WARRANTY
A. Warranty Period: Two years from date of Substantial Completion. PART 2 - PRODUCTS
2.1 MANUFACTURER
A. Aiphone Corporation, 1700 130th Avenue NE, Bellevue, Washington 98005. Toll Free (800) 692-0200. Phone (425) 455-0510. Fax (425) 455-0071. Website www.aiphone.com. E-mail [email protected].
2.2 DOOR ENTRY SECURITY AND COMMUNICATION SYSTEM
A. Integrated Security and Communication System: Aiphone “AX Series”.
1. Power Source:
a. 24 V DC, 2 A. b. Two PS-2420UL (110 V AC) per video system. One PS-2420UL (110 V AC) per audio
system.
2. Door Station Calling:
a. Tremolo call tone programmable from 10 to 600 seconds or infinite. b. LCD monitor remains on for duration of call-in and communication up to a maximum of 10
minutes.
3. Master Station Calling: Select station to call, pre-tone sounds, then speak hands-free or push-to-talk.
19-002 / Bay Mills Health Center 28 70 00 - 6 DOOR ENTRY COMMUNICATION SYSTEM
4. Communication:
a. Auto: VOX. b. Manual: Press-to-talk, release-to-listen.
5. Camera: CCD 250,000 pixels. 6. Video Monitor:
a. 3.5-inch direct view TFT color LCD. b. Scanning Lines: 525.
7. Door Release: N/O or N/C, programmable per station. 8. Door Release Contact: 24 V AC/DC, 0.5 A. 9. Wiring: CAT-5e UTP-4 homerun from each station to CEU. 10. Distance:
a. Door Station to CEU: 980 feet maximum. b. Master Station to CEU: 980 feet maximum.
11. CO Line Transfer Adaptor: Viking Electronics, Inc. “K-1900-5 Hot-Line Pulse Dialer”.
B. Central Exchange Unit:
1. Expanded Central Exchange Unit: Model AX-248C.
a. Connect: Maximum of 8 master stations and 24 door stations. b. Current Consumption:
1) Video: 1100 mA maximum. 2) Audio: 1250 mA maximum.
c. Video Output:
1) NTSC standard 1 Vpp (0.7 to 1.4 Vpp). 2) Two BNC.
d. Video Output Trigger:
1) Open collector output. 2) 24 V DC, 30 mA. 3) Two RJ-45.
e. Master and door stations homerun to CEU for connection and programming. f. RJ-45 Input Jacks: Station connection, add-on CEU connection, and CO line output. g. Quick Release: Dry contact terminals for door release functions and power supply
connection. h. RS-232 Connection:
1) Input: Programming. 2) Output: Event logging and CCTV/access control interface.
i. Composite video output (BNC). j. Selective door release programmable to N/O or N/C. k. CCTV and access integration. l. Programmable by PC. m. Rack mountable (2U).
19-002 / Bay Mills Health Center 28 70 00 - 7 DOOR ENTRY COMMUNICATION SYSTEM
n. Operating Temperature: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C). o. Power switch. p. Power/Communications Error Display LED:
1) Off: Power off. 2) Lit: Power on. 3) Flashing: Error in device or wiring.
q. Ports:
1) Door station ports. 2) Master station ports. 3) Add-on exchange unit ports. 4) CO line port. 5) Setting/log port. 6) Video output ports. 7) Video output trigger ports. 8) Door release relay ports. 9) Power supply ports.
C. Master Stations:
1. Master Stations: [Audio/Color Video Model AX-8MV] [and] [Audio Model AX-8M].
a. CAT-6 homerun wired to CEU. b. Buttons:
1) 8 individual door station selector buttons with LED. 2) 8 individual master station selector buttons with LED. 3) Door release button with LED. 4) Scan monitor button with LED. 5) CO line transfer button with LED. 6) Privacy button with LED. 7) Oversized TALK button with LED to activate VOX or PTT style communication. 8) ALL CALL button. 9) OFF button.
c. Occupied LED. d. Speaker. e. Microphone. f. Volume Controls:
1) Receive Switch: Low, medium, high. 2) Transmit Switch: Low, medium, high. 3) Call tone.
g. LCD brightness control. h. Jacks:
1) Headset receiver. 2) Headset microphone.
i. Headset Volume Controls:
1) Receiver. 2) Microphone.
19-002 / Bay Mills Health Center 28 70 00 - 8 DOOR ENTRY COMMUNICATION SYSTEM
j. Directory Cards and Covers:
1) Master station. 2) Door station.
k. Reset switch. l. RJ-45 jack for connection to CEU. m. Connector for add-on selector on master station. n. Door call-in indicator. o. Hands-free or push-to-talk communication. p. All Call to master stations. q. Scan monitoring. r. Selective door release. s. Privacy and mute functions. t. Wall or desk mount. Metal bracket included for wall mounting. u. Multi-Pin Connector:
1) Video output from master station. 2) External signaling of call tones (through IER-2 or activation of TAR-3). 3) Footswitch activation for TALK function.
v. Operating Temperature: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C). w. Monitor: 3.5-inch color LCD, master station Model AX-8MV. x. Outside Video Output: NTSC standard 1 Vpp (0.7 to 1.4 Vpp), master station Model AX-
8MV.
D. Door Stations:
1. Fixed Color Video Door Station: Model AX-DVF.
a. Faceplate: Stainless steel. b. Surface mount with use of SBX-AXDVF stainless steel back box. c. Call Button: Metal. d. Camera. e. Camera Protection: Clear Lexan lens cover. f. RJ-45 jack. g. Speaker. h. Microphone. i. Directory card. j. White Illumination LEDs: Automatically turn on in low-light conditions. k. CAT-5e homerun wired to CEU. l. Operating Temperature: 14 degrees F to 140 degrees F (minus 10 degrees C to 60
degrees C). m. Vandal resistant.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine areas to receive integrated security and communication system. B. Notify Architect of conditions that would adversely affect installation or subsequent use. C. Do not begin installation until unacceptable conditions are corrected.
19-002 / Bay Mills Health Center 28 70 00 - 9 DOOR ENTRY COMMUNICATION SYSTEM
3.2 INSTALLATION
A. Install integrated security and communication system in accordance with manufacturer’s instructions at locations indicated on the Drawings.
B. Mount equipment plumb, level, square, and secure. C. CAT-6 Cables:
1. Run cables from and homerun to one central location where CEU will be installed. 2. Maximum Cable Runs: Keep each cable run to a maximum of 980 feet from communication
device to CEU. 3. Maintain twists of cable pairs to point of termination or no more than 0.5-inch untwisted. 4. Do not remove more than 1 inch of jacket when terminating cables. 5. Cable Bends:
a. Make gradual bends of cable, where necessary. b. Do not make bends of cable sharper than 1-inch radius. c. Do not allow cable to be sharply bent or kinked at any time.
6. Cable Ties: Dress cables neatly with cable ties using low to moderate pressure. 7. Cross-connect cables, where necessary, using CAT-5e rated punch blocks and components. 8. Do not splice or bridge cables. 9. Cable Pulling:
a. Pull cable with low to moderate force. b. Do not use oil or other lubricants not specifically designed for cable pulling.
10. Keep cables as far away from potential sources of EMI as possible. 11. Do not tie cables to electrical conduits or lay cables on electrical fixtures. 12. Cable Supports:
a. Install proper cable supports a maximum of 5 feet apart. b. Do not support cables by ceiling tiles.
13. Label Cable Termination Points: Use unique number for each cable segment. 14. Testing Cables: Test installed cable segments with cable tester. 15. Jacks: Install jacks to prevent dust and other contaminants from settling on contacts. 16. Cable Slack:
a. Leave extra slack on cables, neatly coiled-up in ceiling or nearest concealed place. b. Leave a minimum of 1 foot of cable slack at door station side and a minimum of 10 feet of
cable slack at CEU side.
17. Do not install cables taught. 18. Grommets: Protect cables with grommets where passing through metal studs or other items that
could damage cables. 19. Do not mix TIA/EIA 568A and 568B wiring on same installation. Use TIA/EIA 568B wiring
throughout installation. 20. Staples:
a. Do not use staples that crimp cables tightly. b. Do not use T-18 and T-25 cable staples.
21. Use firestop cables that penetrate firewalls. 22. Use plenum-rated cables where mandated.
19-002 / Bay Mills Health Center 28 70 00 - 10 DOOR ENTRY COMMUNICATION SYSTEM
3.3 ADJUSTING
A. Adjust integrated security and communication system for proper operation in accordance with manufacturer’s instructions.
3.4 DEMONSTRATION AND TRAINING
A. Demonstration:
1. Demonstrate that integrated security and communication system functions properly. 2. Perform demonstration at final system inspection by qualified representative of manufacturer.
B. Instruction and Training:
1. Provide instruction and training of Owner’s personnel as required for operation of integrated security and communication system.
2. Provide hands-on demonstration of operation of system components and complete system, including user-level program changes and functions.
3. Provide instruction and training by qualified representative of manufacturer.
3.5 PROTECTION
A. Protect installed integrated security and communication system from damage during construction.
END OF SECTION
TS
PLAN NOTES
GENERAL NOTES
OFFICE
1122
OFFICE
1123
OFFICE
1124
OFFICE
1125
PROCEDUREROOM (POSPRESSURE)
1102
BILLING OFFICE(ASHLEY)
1177
ADMIN OFFICE(DAN)
1176
ADMIN OFFICE(TARA)
1175
OFFICE
1126
PRC (ASHLEY)
1014
CONTACTS
1152
TOILET
1137
SPECIMEN TOILET
1131B
SPECIMEN TOILET
1131A
LAB OFFICE
1135
LAB
1134
WORKROOM
1151
OPTICAL EXAM
1155
OPTICAL EXAM
1154
VISITATION
1162
REFERENCE
1161
TOILET
1145
H.I.M
1160
MEETING
1143
MECH ROOM
1221
HIM OFFICE(ANDREW)
1178
LOCKERS
1222
PAN
1205
PATIENT REG/CONSULT
1016
PRC (MIKALA)
1015
DENTAL CONSULT
1201
DENTALRECORDS
1203
TOILET
1220
LAB OFFICE
1210A
LAB
1210
TOILET
1209
STERILIZATION
1208
TOILET
1103
PROCEDUREROOM (POSPRESSURE)
1104
CONSULT
1101
OFFICE
1116
PLAY THERAPY
1114
GROUP THERAPY
1113
OFFICE
1115OFFICE
1112
WAITING
1130DRAW
1133
STAFF WORK
1132
MEN'S TOILET
1010
B.H. HALLWAY
1117B.H. HALLWAY
1110
PROCEDUREHALLWAY
1105
OPTICALHALLWAY
1150
OPTICAL SALES
1153
HALLWAY
1142
HALLWAY
1140 DENTAL HALLWAY
1207
PAN OPERATOR
1202A
DENTAL HALLWAY
1219
STORAGE
1114A
JAN.
1107
BILLING HALLWAY
1170
ADMIN OFFICE(ABBY)
1172
MEETING
1144
ADMIN OFFICE(YVONNE)
1173
ADMIN OFFICE(AUDREY)
1174 DENTAL EXAM
1215
DENTAL HALLWAY
1202
DENTAL EXAM
1211
DENTAL EXAM
1212
DENTAL EXAM
1213
DENTAL EXAM
1214
DENTAL EXAM
1216
HALLWAY
1005
DENTALRECEPTION
1204
DENTAL WAIT
1200
TRADITITIONALHEALING
1106
PROCEDUREHALWAY
1100
IT
1136
PROVIDEROFFICE
1094D
OFFICE
1118
OFFICE
1119
OFFICE
1120
OFFICE
1121
CD-125
CD-125
8/8
VAV 2-17
VAV 2-18 12/10
CD-200
CG-130
CG-375
VAV 2-19
VAV 2-20
8/10
CD-100
CD-170
CD-130
12/10
CD-200VAV 2-21
CD-95
CD-75
VAV 2-22
12/10
CD-200
VAV 2-23VAV 2-24
CD-150 CD-150
8/10 8/10
12/10
VAV 2-26CD-160 CD-16010/10
10/10
VAV 2-25
10/10
CD-75
CD2-75
VAV 2-27
LSD-250 48" x (3) 3/4" SLOTS
LSD-250 48" x (3) 3/4" SLOTS
VAV 2-28
VAV 2-29
VAV 2-30
VAV 2-31
CD-100CG-100
8/8
8/8
CG-980
CG-975
LSD-11048" x (2) 3/4" SLOTS
(2) LSD-150 48" x (2) 3/4" SLOTS
VAV 2-1
(2) LSD-150 48" x (2) 3/4" SLOTS
8/10
VAV 2-2
VAV 2-3
8/8
8/10
CG-150CG-150CG-150CG-150
CG-300
10/12VAV 2-4
(2) LSD-150 48" x (2) 3/4" SLOTS
(2) LSD-240 48" x (3) 3/4" SLOTS
10/12
CG-240
CG-240
CD-150
CD-175 CD-175
VAV 2-512/12
(2) LSD-270 48" x (3) 3/4" SLOTS
CG-270
CG-270
VAV 2-7
CD-75
CD-110 CD-110
CD-110CD-90
VAV 2-8
8/8
CG-330
CG-90
VAV 2-9
CD-90
VAV 2-10
CG-90
8/8
CD-75
CD-80
VAV 2-11
14/12
VAV 2-12
CG-80
8/8
CD-75
CG-485
12
/10
12/10
VAV 2-14
CD-140
CD-140
8/10
8/10
VAV 1-32
VAV 1-30
SR-54018x10
SR-54018x10
18/12
CD-200
LSD-125
24/12
CG-2000
CD-150
VAV 2-13
CD-120
CD-120
CD-110
CG-120
CG-120
VAV 2-15
CD-130
CG-130
14/1212/12
VAV 2-16
CD-125
CD-75 CD-175
CD-100 CD-100
CD-100 CD-110
M9
17
ER-1008x8
ER-1008x8
ER-1008x8
ER-1008x8
ER-1008x8
ER-30012x12
12/10
12
/8
3
ER-41012x12
M
12/10
8/8
8/8
ER-1008x8
ER-508x8
CG-350
VAV 1-1 VAV 1-2
VAV 1-3
VAV 1-6
VAV 1-5
8/10
12/12
14
/12
32
/12
CG-275
CG-250
CG-150
CG-150 CG-150
CG-150 CG-150
CG-50
CG-130CG-130CG-130
CG-250
CG-250
LSD-150 48" x (2) 3/4" SLOTS
LSD-125 48" x (2) 3/4" SLOTS
M
12/101
2
(3) LSD-150 48" x (2) 3/4" SLOTS
(2) LSD-150 48" x (2) 3/4" SLOTS
LSD-130 48" x (2) 3/4" SLOTS
LSD-250 48" x (3) 3/4" SLOTS
12/10 8/10
8/1
0
4
4 4 4 4 4
444 4
CD-130 CD-130
CD-175
CD-130
CD-50
10/10 8/10
8/812/10
CD-125
8/8
12/108/10
10/10VAV 1-8
VAV 1-7
CD-175 CD-175
M
CG-360
(2) CD-155
12/10
4
4
4 CD2-50
CG-305
VAV 1-4
30
/18
30
/20
CG-210
12
/12
12
/10
8/1
0
8/10
55
8/8
CD-170 CD-170
VAV 1-11 VAV 1-12
CD-180
VAV 1-10
CD-170 CD-170
10
/10
10
/10
4
18/1012/10 8/10
8/8
8/10VAV 1-31
8/10
8/8
10/10
CD-125
(2) LSD-150 48" x (2) 3/4" SLOTS
(2) LSD-150 48" x (2) 3/4" SLOTS
(2) LSD-150 48" x (2) 3/4" SLOTS
8/8
10/8
(2) ER-275 12x6
8/8
8/8
8/8
20
/14
28
/14
30
/16
36/1630/2018/1416/14
12/8
8/10
8/10
10/10
34
/12
24
/12
14
/12
CG-110
52/22
54
/20
2
M4.2
8/8
13
S
20
4
4
5
4
4
VAV 2-6
5
4 4 4
4
411
8/8
4
10/10
20
12
5
4
5
1 2 3 4 5 6 7 8 9 11 12 17 20 21 22 23 25 26
A
B
E
F
I
J
LL
N
O
32282724 30 31
S
K
14 18 19
Q
P
13
8/1
0
ER-1008x8
18/14
8/8
CG-500
12/12
4
4
4
4
CG-230
CG-270
20/10
CG-110
SR-53518x10
AFMS
14
10
ER-33012x12
12/8
12/10
15
MER-60018x10
ER-30012x6
ER-30012x6
12/6 12/10
12/10
M12/8
ER-30012x12
6
M
7
8M
BD
M
19
12
/10
CD2-95CG-95
4
ER-508x8
8/8
8/8
18
8/8
5
F
F
F
(2) LSD-150 48" x (2) 3/4" SLOTS
8/1
08/1
08/1
08/1
0
CD-200
STORAGE
1111
F
F
F
21
FS
SPS 22
SPS 23
S
FS
MECH.
1223
TG-1008x8
SR-27512x6
ER-44012x12
12/8
TG-135020x20
24/10
M
1
24
16
16
1
1
Hall
1006
1. 12/10 EXH DUCT UP THRU ROOF TO EF-1.
2. 12/10 EXH DUCT UP THRU ROOF TO EF-2.
3. 12/12 EXH DUCT UP THRU ROOF TO EF-9.
4. 8/8 TRANSFER DUCT.
5. 10/10 TRANSFER DUCT.
6. 10/10 EXH DUCT UP THRU ROOF TO EF-10.
7. 12/12 EXH DUCT UP THRU ROOF TO EF-11.
8. 8/8 EXH DUCT UP THRU ROOF TO EF-12.
9. 12/10 EXH DUCT UP THRU ROOF TO EF-13.
10. DUCT MOUNTED SMOKE DETECTOR FURNISHED BY DIV. 26 CONTRACTOR. INSTALLED IN DUCTWORK BY DIV. 26 CONTRACTOR.
11. 48/36 INTAKE DUCT UP THRU ROOF TO GRV-3.
12. 28/16 TRANSFER DUCT.
13. 14/14 TRANSFER DUCT.
14. 66/36 RELIEF DUCT UP THRU ROOF TO GRV-2.
15. 12/6 DUCT DN TO ER 12X6. BOTTOM OF REGISTER SHALL BE 6' AFF.
16. 14/12 TRANSFER DUCT.
17. 8/8 EXH DUCT UP THRU ROOF TO EF-14.
18. 38/12 TRANSFER DUCT.
19. BALANCE TO 7330 CFM.
20. 18/14 TRANFER DUCT.
21. 8/8 EXH DUCT DN TO 12" AFF. TERMINATE WITH OPEN DUCT.
22. STATIC PRESSURE SENSOR FOR AHU-1 FAN CONTROL.
23. STATIC PRESSURE SENSOR FOR AHU-2 FAN CONTROL.
24. DISCONNECT AND RELOCATE EXISTING DENTAL HOOD AND 36" x 3-1/2" TO 10" DIAMETER TRANSITION DUCT FROM OWNERS EXISTING FACILITY. VERIFY EXACT LOCATION AND CONDITIONS. CAP EXISTING ROOF PENTRATION AIR AND WATER TIGHT. INSTALL EXISTING RELOCATED 48" x 24" HOOD AND 36" x 3-1/2" TO 10" DIAMETER TRANSITION DUCT WITH NEW 10" DIAMETER EXHAUST DUCT UP THRU ROOF TO RAIN CAP. RAIN CAP SHALL BE 8'-0" ABOVE ROOF LEVEL, PROVED GUY WIRES AS REQUIRED. VERIFY EXACT MOUNTING HEIGHT WITH OWNER.
A. DUCT SIZES SHOWN ON PLANS ARE CLEAR INSIDE DIMENSIONS WHERE DUCTWORK IS INTERNALLY LINED. INCREASE DIMENSIONS OF SHEET METAL ACCORDINGLY.
B. ALL TRANSFER DUCTS SHALL BE INTERNALLY LINED WITH 1" ACOUSTIC LINER.
C. MAINTAIN UNOBSTRUCTED CLEARANCE TO THE ENTIRE BOTTOM PANEL OF ALL VAV BOX/REHEAT COILS.
D. DIFFUSER BRANCH DUCT SIZE SHALL BE THE SAME AS THE DIFFUSER NECK SIZE UNLESS OTHERWISE NOTED.
E. PROVIDE BALANCING DAMPER FOR EACH SUPPLY OUTLET AND EXHAUST INLET, UNLESS THERE IS ONLY ONE DIFFUSER FOR A VAV BOX.
F. REFER TO VAV/REHEAT COIL TERMINAL UNIT SIZING SCHEDULE FOR VAV BOX INLET DUCT SIZES.
G. REFER TO CEILING DIFFUSERS SIZE SCHEDULE FOR DIFFUSERS NECK SIZES.
H. ALL CEILING GRILLES (RETURN AIR) SHALL BE 24"x12" UNLESS NOTED OTHERWISE.
I. PROVIDE PRICE MODEL RAC RETURN AIR CANOPY UNLESS NOTED OTHERWISE.
J. TEMPERATURE CONTROL CONTRACTOR SHALL FURNISH ALL MOTORIZED DAMPERS FOR INSTALLATION BY MECHANICAL CONTRACTOR.
K. COODINATE DUCTWORK INSTALLATION WITH OTHER TRADES. WHERE IT IS POSSIBLE UTILIZE JOIST SPACE.
Level 10' - 0"
22
/78
16/78
18
/78
AHU-2
4" CONCRETE PAD
GRV-2
36
/66
18
/78
22/52
48/2420/54
52/22 24/48
SA-2BSA-2A
48/60 RELIEF DUCT THRU ROOF
10
S
ABD C
AFMS
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
SSS
07/06/2020
Bay Mills
Health
Center12455 W. Lakeshore Drive
Brimley, Michigan 49715
M4.2
First Floor
Plan - North -
HVAC
EDI#19-002
6201068139
Steve S. Schreurs
AE, LS
8' 16'4'01/8" = 1'-0"M4.2
1 First Floor Plan - North - HVAC
0 4' 8'2'1/4" = 1'-0"M4.2
2 Mechanical 1223 - Section 2
NORTH
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
SSS
07/06/2020
Bay Mills
Health
Center12455 W. Lakeshore Drive
Brimley, Michigan 49715
M6.1
Mechanical
Schedules
EDI#19-002
6201068139
Steve S. Schreurs
AE, LS
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
1
LIGHT FIXTURE WITH EMERGENCY BALLAST
SYMBOL
*** DISTANCE TO HIGHEST OPERABLE PART OF EQUIPMENT
VERIFYAS NOTED SURFACE BRANCH CIRCUIT PANEL (250-V OR LESS)
2 POLE SINGLE THROW SW.
SINGLE POLE SW.
LIGHT ON CORD REEL (TYPE DENOTED)
LIGHTING CHANNEL WIRE (TYPE DENOTED)
SEPARATE PILOT LIGHT
DIMMER SWITCH
MOMENTARY CONTACT SWITCH
OCCUPANCY SENSOR SWITCH
PUSH BUTTON
SINGLE RECEPT.
FAN SPEED CONTROL
TIME DELAY SWITCH
SPLIT DUPLEX RECEPT.
FOURPLEX RECEPT.
DUPLEX RECEPT.
RECEPT ON EMERGENCY CKT (DUPLEX SHOWN)
ISOLATED GROUND RECEPT (DUPLEX SHOWN)
240 VOLT RECEPT.
EQUIPMENT PLUG
RECEPT ON DROP CORD (DUPLEX SHOWN)
RECEPT ON CORD REEL (DUPLEX SHOWN)
ALL DISTANCES ARE TO CENTER OF DEVICE OR EQUIPMENT UNLESS OTHERWISE NOTED. DEVICES INDICATED AT 48" MAY NOT BE INSTALLED WITH ANY OPERABLE PART HIGHER THAN 48". DEVICES MAY BE INSTALLED IN CONCRETE MASONRY UNITS WITH THE TOP OF THE DEVICE AT 48".
AS NOTED
* DISTANCE ABOVE TOP OF DOOR FRAME
J
TIMER SWITCH
AS NOTED
AS NOTED
48"
48"2
3
KEYED SW.
SW. W/PILOT
3-WAY SW.
4-WAY SW.
L
** DISTANCE TO TOP OF EQUIPMENT OR DEVICE
EXISTING TO REMAIN
DASHED SYMBOL INDICATES REMOVED
SOLENOID VALVE
48"
48"
48"
AS NOTED
H
T
TC
AS NOTED
72"**
72"**
PS
OS
FS
R
72"**
72"**
72"**
48"
72"**
72"**
VERIFY
VERIFY
SF-1
T1
BUS DUCT WITH PLUG UN DISCONNECT (FUSED)
LIGHT LEVEL SENSOR - TYPE DENOTED
TIME CONTROL SWITCH (TIME SWITCH)
HUMIDISTAT
THERMOSTAT
PHOTOCELL
ENCLOSED CIRCUIT BREAKER
PRESSURE SWITCH
RELAY
48"
84"
AS NOTED
84"
COMB. MOTOR STARTER (NON-FUSED)
MAG. MOTOR STARTER OR CONTACTOR
SAFETY DISC. SW. (FUSED)
SAFETY DISC. SW. (NON-FUSED)
COMB. MOTOR STARTER (FUSED)
MANUAL MTR. STR. (W/OVERLOADS)
POWER OR DISTRIBUTION PANEL
MOTOR (SEE SCHEDULE)
TRANSFORMER (TYPE DENOTED)
MOTOR HORSEPOWER RATED SWITCH
DAMPER MOTOR
SPECIAL CABINET (TYPE DENOTED)
48"***
20"
48"
20"
J
DESCRIPTION
WALL MOUNTED LIGHT (TYPE DENOTED)
POLE MOUNTED LIGHT (TYPE DENOTED)
RECESSED LIGHT (TYPE DENOTED)
SURFACE MOUNTED DOWNLIGHT (TYPE DENOTED)
EXIT SIGN (TYPE DENOTED)
SUSPENDED OR PENDANT LIGHT (TYPE DENOTED)
TRACK AND TRACK LIGHT (TYPES DENOTED)
SURFACE LIGHT (TYPE DENOTED)
STRIP LIGHT (TYPE DENOTED)
EMERGENCY BATTERY LIGHT (TYPE DENOTED)
RECESSED LIGHT (TYPE DENOTED)
POLE MOUNTED FLOODLIGHT (TYPE DENOTED)PER SCHED
PER SCHED
AS NOTED
12"*
96"
HT AFF
AS NOTED
SYMBOL
AS NOTED
AS NOTED
J J
2
1
84" A
P
HT AFF
20"
20"
SYMBOL
A
GROUND CONNECTION - EXOTHERMIC WELD
GROUND CONNECTION TO STEEL OR STRUCTURE
SPECIAL CONNECTION (SEE SCHEDULE)
SPECIAL RECEPT. OR CONN. (SEE SCHEDULE)
JUNCTION BOX
PULL BOX
GROUND ROD (PLAN VIEW)
CLOCK (TYPE DENOTED)
POWER POLE (OPEN OFFICE STYLE)
MULTIOUTLET ASSEMBLY (TYPE DENOTED)
MULTIOUTLET ASSEMBLY (TYPE DENOTED)
DESCRIPTION HT AFF
GAS DETECTOR (TYPE DENOTED)
PROJECTOR CONTROL OUTLET
**** DISTANCE BELOW CEILING
WEATHERHEAD
ANTENNA
***** DISTANCE TO BOTTOM OF DEVICE
EQUIPMENT GROUND OUTLET
X-RAY FILM VIEWER (SEE SPECIFICATIONS)
DOOR SIGNAL - APT. UNIT
SPEAKER (WALL OR CEILING MT.)
SURFACE MT SPEAKER SUSPENDED FROM CEILING
S
MICROPHONE OUTLET
HORN TYPE SPEAKER
VOLUME CONTROLV
BUZZER
D
NFV-4x2
BELL
LADDER RACK (TYPE DENOTED)
CABLE TRAY (TYPE DENOTED)
INFORMATION OUTLET (TYPE DENOTED)
WALL TELEPHONE OUTLET (TYPE DENOTED)
INTERCOM OUTLET LOCATION
TELEPHONE OUTLET (TYPE DENOTED)
WALL DICTATION OUTLET LOCATION
MULTIPLE SERVICE OUTLET (TYPE DENOTED)
DICTATION OUTLET LOCATION
TELEVISION OUTLET
D
W
W
F.A. PULLSTATION
F.A. DOOR CLOSER
F.A. DOOR HOLDER
F.A. INDIVIDUAL ADDRESSABLE MODULE
FIRE ALARM SHUT DOWN RELAY
SPRINKLER VALVE TAMPER SWITCH
SPRINKLER FLOW SWITCH
F.A. ZONE ADDRESSABLE MODULE
END OF LINE RESISTOR
SPRINKLER TEMPERATURE SWITCH
SPRINKLER LEVEL SWITCH
SPRINKLER PRESSURE SWITCHT
ELR
FR
CO
F
CO
HEAT DETECTOR (TYPE & TEMP DENOTED)
HT AFF
CONDUIT TRANSITION DOWN
CONDUIT TRANSITION UP
BRANCH CIRCUIT HOME RUN
CONDUIT EXPOSED
CONDUIT STUBBED OUT
CONDUIT CONCEALED BELOW FLOOR
CONDUIT CONCEALED IN WALL OR OVERHEAD
DESCRIPTION
FIRE ALARM CHIME
FIRE ALARM BELL
FIRE ALARM BELL W/STROBE (CANDELAS)
SMOKE DETECTOR (TYPE DENOTED)
FIRE ALARM STROBE (CANDELAS)
FIRE ALARM SPEAKER W/STROBE (CANDELAS)
FLAME DETECTOR (TYPE DENOTED)
DUCT SMOKE DETECTOR (TYPE DENOTED)
REMOTE TEST/STATUS STATION
LINEAR HEAT DETECTOR
FIRE ALARM CHIME W/STROBE (CANDELAS)
R/F135
UV/IR
R/F135
DESCRIPTION
FIRE ALARM HORN
FIRE ALARM HORN W/STROBE (CANDELAS)
SYMBOL
F
110cd
UTILITY SERVICE POWER POLE (SITE)
GENERATOR (KVA DENOTED)25 KVA
ELECTRICAL SYMBOL LEGEND
48"
48"
48"
48"
48"
48"
48"
48"
48"
48"
48"
48"
48"
20"
20"
20"
20"
20"
20"
20"
FOURPLEX RECEPTACLE ON EMERGENCY CIRCUIT20"
4
K
D
OS
MC
T
TD
SP
M
B
P
PB
VARIABLE FREQUENCY DRIVE
MUSHROOM SWITCH
LS
CP
OCCUPANCY SENSOR - TYPE DENOTED
FLOAT SWITCH
IC
20"
20"
20"
48"***
20"
48"***
84"
84"
20"
20"
D
G
J
CHIME
S
S S
S
M
P
90"**
48"***
48"
8"****
90"**
90"**
90"**
90"**
90"**
90"**
90"**
110cd
110cd
110cd
F
F
F
F
F
F
110cd
START/STOP PUSH BUTTON STATION48"
P
60"** FIRE ALARM REMOTE ANNUNCIATOR FA ANNUN
UV/IR
Z
I
F S
DURESS PUSHBUTTON - SURFACE MOUNTED
DURESS PUSHBUTTON - WALL MOUNTED
1 KEYED NOTE (SEE SCHEDULE)
ELECTRICAL ABBREVIATIONS LIST
ELECTRICAL DRAWINGS
ELECTRICAL SYMBOL NOTES
SF-1
T1
L1
1
EXIT LIGHTS. STEM INDICATES WALL MOUNTING. NO STEM INDICATES CEILING MOUNTING. SHADED AREA INDICATES ILLUMINATED FACE(S). ARROW INDICATES DIRECTIONAL ARROW ON ILLUMINATED FACE(S).
THE CONTROL DEVICE DESIGNATION IS INDICATED BY A LOWER CASE LETTER. EXAMPLE: SWITCH, OCCUPANCY SENSOR AND DAYLIGHT SENSOR WITH "a" TO CONTROL LIGHTING FIXTURES WITH SWITCH DESIGNATION INDICATED BY "a" INSIDE A ROOM/AREA.
THE CONTROL DEVICE WITH A NUMBER WITH CIRCLE AROUND IT REPRESENTING THAT IT IS CONTROLLING A RELAY. EXAMPLE: SWITCH, OCCUPANCY SENSOR AND DAYLIGHT SENSOR WITH "5" TO CONTROL LIGHTING FIXTURES WITH RELAY NUMBER INDICATED BY "5"
MOTOR CONNECTIONS. THE MOTOR IS INDICATED BY A NUMBER WITHIN ORCHARACTERS ADJACENT TO THE MOTOR SYMBOL. SEE THE MOTOR AND EQUIPMENTSCHEDULE FOR THE MOTOR DESCRIPTION AND ELECTRICAL REQUIREMENTS.
TRANSFORMERS. THE TRANSFORMER TYPE IS INDICATED BY A NUMBER FOLLOWINGTHE UPPER CASE LETTER "T". SEE THE TRANSFORMER SCHEDULE OR THE SINGLE LINEDIAGRAM FOR THE TRANSFORMER DESCRIPTION AND REQUIREMENTS. EXAMPLE:TRANSFORMER TYPE "T1".
PANELBOARDS. PANELBOARD DOORS MAY BE SHOWN TO INDICATE OPENING SIDE OFRECESSED PANELBOARDS. SEE PANELBOARD IDENTIFICATION FOR DESIGNATIONCODES.
PLAN NOTE. SEE THE PLAN NOTES ON THAT SHEET FOR THE NOTE NUMBERINDICATED IN THE HEXAGON.
HOME RUN TO BRANCH CIRCUIT PANELBOARD. THE PANELBOARD DESIGNATION ISSHOWN ADJACENT TO THE HOME RUN ARROW AS A NUMERATOR AND THE CIRCUITDESIGNATION IS SHOWN AS THE DENOMINATOR. CIRCUIT BREAKER SIZES(AMPS/NUMBER OF POLES) ARE SHOWN IN THE PANELBOARD SCHEDULE WITH THECORRESPONDING PANELBOARD AND CIRCUIT DESIGNATION. EXAMPLE: HOME RUN TOPANELBOARD LPN-102; CIRCUITS 1, 3, 5.
A2H1/1
bLIGHT FIXTURE TYPE
CIRCUIT NUMBER
PANEL NAME
SWITCH DESIGNATION
1 RELAY NUMBER (IF APPLICABLE)
E1H1/14
H3/1,3,5
A. PENETRATIONS IN WALLS REQUIRING PROTECTED OPENINGS MUST BE FIRESTOPPED WITH AN APPROVED MATERIAL.
1. CONDUITS MAY PENETRATE WALLS OR PARTITIONS, PROVIDED THEY ARE FIRE-STOPPED.
2. OPENINGS FOR STEEL ELECTRICAL BOXES NOT EXCEEDING 16 SQUARE INCHES ARE PERMITTED PROVIDED OPENINGS DO NOT AGGREGATE MORE THAN 100 SQUARE INCHES FOR ANY 100 SQUARE FEET OF WALL OR PARTITION.
3. OUTLET BOXES ON OPPOSITE SIDES OF WALLS OR PARTITIONS MUST BE SEPARATED BY A HORIZONTAL DISTANCE OF 24 INCHES.
B. LIGHT FIXTURES AND OTHER APPARATUS SUPPORTED BY THE ACOUSTICAL CEILING GRID MUST MEET THE REQUIREMENTS OF NEC SECTION 410.16, MEANS OF SUPPORT.
C. RECESSED LIGHTING FIXTURES INSTALLED IN FIRE RATED CEILING ASSEMBLIES SHALL BE FIRE RATED FIXTURES BEARING THE UL FIRE RATED LABEL. FIXTURES SHALL BE INSTALLED IN ACCORDANCE WITH THE UL FIRE RESISTANCE DIRECTORY, AND SHALL INCLUDE A FIRE RATED ENCLOSURE INSTALLED OVER THE FIXTURE THAT MEETS THE REQUIREMENTS OF THE UL FIRE RESISTANCE DIRECTORY.
SPECIFIC CODE NOTES
EMEM
NIGHT LIGHT FIXTURE WITH EMERGENCY BALLAST
ADA DOOR OPENER
HD
O
KITCHEN EQUIPMENT TAG (SEE SCHEDULE)##
CEILING MOUNT WIRELESS ACCESS POINT
48"*** INMATE WALL PHONE (TYPE DENOTED)I
48"*** VIDEO VISITATION (TYPE DENOTED)VV
EMERGENCY POWER OFF BUTTON
RELAY NUMBER##
F F
F
1P 1 POLE (2P, 3P, 4P, ETC.)
A AMPEREAC ABOVE COUNTER OR AIR
CONDITIONERACLG ABOVE CEILINGADO AUTOMATIC DOOR OPENERAF AMP FRAMEAFF ABOVE FINISHED FLOORAFG ABOVE FINISHED GRADEAFI ARC FAULT CIRCUIT
INTERRUPTERAHU AIR HANDLING UNITAL ALUMINUMALT ALTERNATEAMP AMPEREAMPL AMPLIFIERANNUN ANNUNCIATORAPPROX APPROXIMATELYAQ-STAT AQUASTATARCH ARCHITECT, ARCHITECTURALAS AMP SWITCHAT AMP TRIPATS AUTOMATIC TRANSFER SWITCHAUTO AUTOMATICAUX AUXILIARYAV AUDIO VISUALAWG AMERICAN WIRE GAUGE
BATT BATTERYBD BOARD BLDG BUILDINGBMS BUILDING MANAGEMENT
SYSTEM
C CONDUITCAB CABINETCAT CATALOGCATV CABLE TELEVISIONCB CIRCUIT BREAKER CCTV CLOSED CIRCUIT TELEVISIONCKT CIRCUITCLG CEILINGCOMB COMBINATIONCMPR COMPRESSORCONN CONNECTIONCONST CONSTRUCTIONCONT CONTINUATION OR CONTINUOUSCONTR CONTRACTORCONV CONVECTORCP CIRCULATING PUMPCRT CATHODE-RAY TUBECT CURRENT TRANSFORMERCTR CENTERCU COPPER
DCP DOMESTIC WATERCIRCULATING PUMP
DEPT DEPARTMENTDET DETAILDIA DIAMETERDISC DISCONNECTDIST DISTRIBUTIONDN DOWNDPR DAMPERDS SAFETY DISCONNECT SWITCHDT DOUBLE THROWDWG DRAWING
EC ELECTRICAL CONTRACTORELEC ELECTRIC, ELECTRICALELEV ELEVATOREM EMERGENCYEMS ENERGY MANAGEMENT SYSTEMEMT ELECTRICAL METALLIC TUBINGEP ELECTRIC PNEUMATICEQUIP EQUIPMENTEWC ELECTRIC WATER COOLEREXIST EXISTINGEXH EXHAUSTEXP EXPLOSION PROOF
FA FIRE ALARMFABP FIRE ALARM BOOSTER POWER
SUPPLY PANELFACP FIRE ALARM CONTROL PANELFCU FAN COIL UNITFIXT FIXTUREFLR FLOORFLUOR FLUORESCENT
FU FUSEFUDS FUSED SAFETY DISCONNECT
SWITCH
GA GAUGEGAL GALLONGALV GALVANIZEDGC GENERAL CONTRACTORGEN GENERATORGFI GROUND FAULT CIRCUIT INTERRUPTERGFP GROUND FAULT PROTECTORGND GROUNDGRS GALVANIZED RIGID STEEL (CONDUIT)GYP BD GYPSUM BOARD
HOA HANDS-OFF-AUTOMATIC SWITCHHORIZ HORIZONTALHP HORSEPOWERHPF HIGH POWER FACTORHT HEIGHTHTG HEATINGHTR HEATERHV HIGH VOLTAGEHVAC HEATING, VENTILATING AND
AIR CONDITIONINGHWP HYDRONIC WATER PUMP
IC INTERRUPTING CAPACITYIG ISOLATED GROUNDIMC INTERMEDIATE METAL CONDUITINCAND INCANDESCENTIR INFRAREDI/W INTERLOCK WITH
J-BOX JUNCTION BOX
KV KILOVOLTKVA KILOVOLT-AMPEREKVAR KILOVOLT-AMPERE REACTIVEKW KILOWATTKWH KILOWATT HOUR
LOC LOCATE OR LOCATIONLT LIGHTLTG LIGHTINGLTNG LIGHTNINGLV LOW VOLTAGE
MAX MAXIMUMMAG.S MAGNETIC STARTERM/C MOMENTARY CONTACTMC MECHANICAL CONTRACTORMCB MAIN CIRCUIT BREAKERMCC MOTOR CONTROL CENTERMDC MAIN DISTRIBUTION CENTERMDP MAIN DISTRIBUTION PANELMFR MANUFACTURERMFS MAIN FUSED DISCONNECT SWITCHMH MANHOLEMIC MICROPHONEMIN MINIMUMMISC MISCELLANEOUSMLO MAIN LUGS ONLYMMS MANUAL MOTOR STARTERMOA MULTIOUTLET ASSEMBLYMSP MOTOR STARTER PANELBOARDMSBD MAIN SWITCHBOARDMT MOUNTMT.C EMPTY CONDUITMTS MANUAL TRANSFER SWITCHMTR MOTOR, MOTORIZED
N.C. NORMALLY CLOSEDNEC NATIONAL ELECTRICAL CODENEMA NATIONAL ELECTRICAL
MANUFACTURER'S ASSOCIATION
NFDS NON-FUSED SAFETY DISCONNECT SWITCH
NIC NOT IN CONTRACTNL NIGHT LIGHTN.O. NORMALLY OPENNPF NORMAL POWER FACTORNTS NOT TO SCALE
OH OVERHEADOL OVERLOADS
PA PUBLIC ADDRESSPB PULL BOX OR PUSHBUTTON
PA PUBLIC ADDRESSPB PULL BOX OR PUSHBUTTONPE PNEUMATIC ELECTRICPED PEDESTAL PF POWER FACTORPH PHASEPIV POST INDICATING VALVEPNL PANELPP POWER POLEPR PAIRPRI PRIMARYPROJ PROJECTIONPRV POWER ROOF VENTILATORPT POTENTIAL TRANSFORMERPVC POLYVINYL CHLORIDE (CONDUIT)PWR POWER
QUAN QUANTITY
RCPT RECEPTACLEREQD REQUIREDRM ROOMRSC RIGID STEEL CONDUITRTU ROOF TOP UNIT
SC SURFACE CONDUITSEC SECONDARYSHT SHEETSIM SIMILARS/N SOLID NEUTRALSPEC SPECIFICATIONSPKR SPEAKERSP SPARESR SURFACE RACEWAYSS STAINLESS STEELSSW SELECTOR SWITCHS/S STOP/START PUSHBUTTONSSTA STATIONSTD STANDARDSURF SURFACE MOUNTEDSW SWITCHSWBD SWITCHBOARDSYM SYMMETRICALSYS SYSTEMTEL TELEPHONETEL/DATA TELEPHONE/DATATERM TERMINALTL TWIST LOCKTR TAMPER RESISTANTT-STAT THERMOSTATTTC TELEPHONE TERMINAL
CABINETTV TELEVISIONTVTC TELEVISION TERMINAL CABINETTYP TYPICAL
UC UNDER COUNTERUE UNDERGROUND ELECTRICALUG UNDERGROUNDUH UNIT HEATERUT UNDERGROUND TELEPHONEUTIL UTILITYUV UNIT VENTILATOR OR ULTRAVIOLET
V VOLTVA VOLT-AMPERESVDT VIDEO DISPLAY TERMINALVERT VERTICALVFD VARIABLE FREQUENCY DRIVEVOL VOLUME
W WATTW/ WITHWG WIRE GUARDWH WATER HEATERW/O WITHOUTWP WEATHERPROOF
XFMR TRANSFORMERXFR TRANSFER
ANGLE@ AT
DELTA' FEET" INCHES# NUMBERØ PHASEC CENTER LINEP PLATELL
CONDUIT SLEEVE (SIZE DENOTED)
UNDERFLOOR RACEWAY SYSTEM
FLOOR BOX FURNITURE FEED (TYPE AS NOTED)
POKE THROUGH FURNITURE FEED (TYPE AS NOTED)
FLOOR BOX W/RECEPTACLE & DATA (QUANTITIES AS NOTED)
POKE THROUGH WITH DATA (QUANTITIES AS NOTED)
FLOOR BOX WITH RECEPTACLE (QUANTITIES AS NOTED)
FLOOR BOX WITH DATA (QUANTITIES AS NOTED)
POKE THROUGH WITH RECEPTACLE (QUANTITIES AS NOTED)
POKE THROUGH W/RECEPT & DATA (QUANTITIES AS NOTED)
DUPLEX RECEPT. (RELAY CONTROLLED)20"
R
20" R FOURPLEX RECEPT. (RELAY CONTROLLED)
S DA
S DA
EPO
L1
VERIFY RECESSED BRANCH CIRCUIT PANEL (250-V OR LESS)L1
SURFACE BRANCH CIRCUIT PANEL (277/480 VOLT)
RECESSED BRANCH PANEL (277/480 VOLT)
VERIFYH1
VERIFYH1
VERIFY SWITCHBOARD MAIN
GROUND BAR
L1/1 CIRCUIT NUMBER
PANEL NAME
1 RELAY NUMBER (IF APPLICABLE)
b
5
OSb
LSb
OS LS
5 5
TYPICAL LIGHTFIXTURE LABELING TYPICAL RECEPTACLE LABELING
TYPICAL FLOORBOX & POKE THROUGH LABELING
2
4
2
4
QUANTITY OF DUPLEX RECEPTACLES
QUANTITY OF DATA CABLE CONNECTIONS
TYPICAL INFORMATION OUTLET LABELING
4QUANTITY OF DATA CABLE CONNECTIONS
RL2/3
PANEL NAME / CIRCUIT NUMBER
RELAY CONTROLED RECEPTACLE LABELING
SEE RELAY PANEL SCHEDULED AND/OR SHEET NOTES FOR ADDITIONAL INFORMATION.
L3/2,4 CIRCUIT NUMBER(S)
PANEL NAME
12"*
NURSE CALL MASTER STATION
NURSE CALL DOME LIGHT (2 LAMP OR # AS NOTED)
NURSE CALL ANNUNCIATOR PANEL
NURSE CALL EQUIPMENT CABINET
NCM
NURSE CALL EMERG. STATION
NURSE CALL DUTY STATION
NURSE CALL STAFF STATION
NURSE CALL CODE BLUE EMERG. STATION
NURSE CALL SINGLE PATIENT STATION
NURSE CALL DUAL PATIENT STATION2
E
48"***
48"
48"
48"***
48"***
48"
48"
B
D
S
P
P
N2
N2
48"*** NCC
NC ANNUN72"**
1
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
ELECTRICAL DRAWINGS
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E0.1
ELECTRICAL
TITLE SHEET
EDI#19-002
Bay Mills Health CenterProject Address
Brimley, Michigan
6201061485
JAY S. HRUBY P.E.
EG-1 GENERATOR COVERAGE
E0.1 ELECTRICAL TITLE SHEET
E1.1 SITE PLAN - ELECTRICAL
E2.1 FLOOR PLAN - SOUTH - LIGHTING
E2.2 FLOOR PLAN - NORTH - LIGHTING
E3.1 FLOOR PLAN - SOUTH - POWER
E3.2 FLOOR PLAN - NORTH - POWER
E3.3 ROOF PLAN - ELECTRICAL
E4.1 FLOOR PLAN - SOUTH - SYSTEMS
E4.2 FLOOR PLAN - NORTH - SYSTEMS
E5.1 POWER RISER DIAGRAM
E5.2 LARGE SCALE PLANS - ELECTRICAL
E5.3 LARGE SCALE PLANS - ELECTRICAL
E5.4 LARGE SCALE PLANS - ELECTRICAL
E5.5 LARGE SCALE PLANS - ELECTRICAL
E6.1 SCHEDULES - ELECTRICAL
E6.2 SCHEDULES - ELECTRICAL
E6.3 SCHEDULES - ELECTRICAL
E6.4 SCHEDULES - ELECTRICAL
E6.5 SCHEDULES - ELECTRICAL
E7.1 DETAILS - ELECTRICAL
E7.2 DETAILS - ELECTRICAL
E7.3 DETAILS - ELECTRICAL
E7.4 DETAILS - ELECTRICAL
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
GENERAL NOTES
PLAN NOTES
OS OS OS OS
OSOSOSOS
OS
OS OS OS
OSOSOS
OS OS OS
OSD D D
DDD
D D D
DDD
D
D D DD
DDD
DDD
D
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
D
D
OS
OS
D
D
OS
OS
OS
DOS
OS
3
4
DD D
OS
D
D
OS
OS
OS
D
OS
D
D
OS
OS OS
OS OS
OS
OS
OS
OS OS
OS
OS
OS
OS
OS
OS
OS OS
OS OS
OS OS
OS
OS
OS
OS
OS
OS
DOS
OS
OSOS
3
DD
DD
LS
OS
OS
OS D
DD
D
OS
OS
OS
OS
OS
OS OS OS
OS
D D
OSOS
OS
D
D
D D
D D
OSOS
OS
OS
OSOS
4 3
3
OS
OS
OS
OS
OS
OS
OS
OS
OSOS
D D
OS
D
OS
D
33
4
D
OS
OS
OS
OS
OS
OS
OS
D D
OS
OS
D
OS
A. PROVIDE AN ADDITIONAL ELECTRICAL CONNECTION TO ALL EMERGENCY LIGHT FIXTURES. ELECTRICAL CONNECTION TO BE FEED FROM UNSWITCHED LEG OF THE CIRCUIT FEEDING THE LIGHT FIXTURES IN THE ROOM/AREA THEY ARE LOCATED IN.
B. PROVIDE PROPER NUMBER OF CONDUCTORS AND CONTROL WIRES TO ACHIEVE CIRCUITING AND LIGHTING CONTROL AS SHOWN.
C. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THIS DRAWING.
D. ALL RECESSED LIGHTING FIXTURES IN LAY-IN CEILINGS SHALL BE INSTALLED WITH 6' LONG FLEXIBLE METAL CONDUIT.
E. ALL MOUNTING HEIGHTS FOR LIGHTING FIXTURES ARE TO THE BOTTOM OF THE FIXTURES UNLESS INDICATED OTHERWISE.
F. SEE ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS OF EXTERIOR LIGHTING FIXTURES.
G. CONDUIT AND WIRE SHALL NOT BE INSTALLED WITHIN THE COMPOSITE FLOOR SYSTEM.
H. CIRCUIT NUMBERS AT DEVICES CORRESPOND TO PANELBOARD BREAKERS (SEE PANELBOARD SCHEDULE). BRANCH CIRCUITS SHALL BE SIZED ACCORDING TO THE CIRCUIT BREAKER RATING, UNLESS INDICATED OTHERWISE ON THE ELECTRICAL EQUIPMENT SCHEDULE.
I. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 120 VOLT BRANCH CIRCUITS LONGER THAN 75 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.
J. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 277 VOLT BRANCH CIRCUITS LONGER THAN 175 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.
1. PROVIDE WALL MOUNTED DUAL TECHNOLOGY OCCUPANCY SENSOR FOR MANUAL ON/AUTOMATIC OFF CONTROL OF LIGHTING IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.
2. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S WITH REMOTE POWER PACK/S FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.
3. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF/RAISE/LOWER STATION FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.
4. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR, CEILING MOUNTED DAYLIGHT AND LOW VOLTAGE SWITCH/ES. PROVIDE 0-10 VOLT DIMMING CONTROLS SWITCH UNLESS NOTED OTHERWISE. (SIMILAR TO WATTSTOPPER DLM SERIES DAYLIGHT AND MOTION SENSOR) FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM.
5. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF SWITCH FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.
6. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S CONNECTED TO LIGHTING CONTROL RELAY PANEL FOR CONTROL OF LIGHTING AS SHOWN IN THIS SPACE.
7. SEE DETAIL 2/E2.1 FOR LIGHT FIXTURE TYPES AND MOUNTING LOCATIONS IN THIS SPACE.
1
1
Level 10' - 0"
T.O. Parapet-Low16' - 0"
Level 324' - 0"
12 12
1212
H2/37L5
H2/37M5
H2/37M5
H2/37L5
12 12
1212
H2/37L5
H2/37M5
H2/37M5
H2/37L5
TVWY
H2/13H
a
H2/15H
h
H2/13H
a
H2/13H
a
H2/13HE
a
H2/13H
a
H2/13H
a
H2/15HE
eH2/15H
e H2/15H
e H2/15H
e H2/15HE
e
H2/15H
f H2/15HE
f H2/15H
f H2/15H
f H2/15HE
f
H2/15H
g H2/15HE
g H2/15H
g H2/15H
g H2/15HE
gg
2 2
g
2 2
2 2
C.H.HALLWAY
1050
EXAMHALLWAY
1070f f
e e
EXAMHALLWAY
1080
a2
a2
a2
a2
a
2
H2/13HE
a
H2/13E1
H2/13HE
H2/15HE
h
H2/15H
h
H2/15H
h
H2/15HE
h
H2/15H
h
H2/15H
h
H2/15HE
h
H2/15H
h
H2/15H
h
H2/15HE
h
h
2
2h
h
2
2h
1PROCEDUREROOM (POSPRESSURE)
1104
PROCEDUREROOM (POSPRESSURE)
1102
TOILET1103
CONSULT1101
H2/11B
H2/11B
3
H2/15H
e
H2/15H
e
H2/11B
H2/11B
H2/11B
H2/11B
H2/11B
H2/11B
H2/11A
H2/11A
EXAM1086 3
EXAM1087 3
EXAM1088 3
CLEAN1091
1
EXAM10843
EXAM10833
EXAM (NEGPRESSURE)
10823
EXAM10723
EXAM10733
EXAM10743
FLEX OFFICE10753
EXAM1077 3
EXAM1078 3
EXAM1079 3
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/9B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/15H
f
H2/15H
f
TRIAGE (NEGPRESSURE)
1081H2/9B
H2/9B
3
1
H2/9W2 TOILET
1035
SCALE1076
MED1093
SOILED1092
1
1
H2/9A
H2/9A
H2/9W2
1
STAFFTOILET1070A
STAFFHALLWAY
1090
C.H.HALLWAY
1061
SCALE1085
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
H2/7B
COMMUNITYHEALTH
(BRENDA)
10603
COMMUNITYHEALTH
(THERESA)
10593
COMMUNITYHEALTH
(GINA HE)
10583
COMMUNITYHEALTH
(STEPHANIE)
10573
COMMUNITYHEALTH
(TRANSPORT)
10553
COMMUNITYHEALTH(CONNIE)
10543
COMMUNITYHEALTH
(SHELBY)
10533
COMMUNITYHEALTH
(JOANNT)
10523AMBULANCE
HOLD (negpressure)
10513
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
H2/5B
C.H. WorkRoom1056
1
CONSULT10713
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/3B
H2/1C8E
H2/1C8
H2/1C8E
H2/1C8
H2/1C8
H2/1C8E
H2/1C4E
COMMUNITYHEALTH
10623
COMMUNITYHEALTH
10633
COMMUNITYHEALTH
10643
NURSESUPERVISOR
(BETTY)
10653
PROVIDEROFFICE1094A3
PROVIDEROFFICE
1094B3
H2/3B
H2/3B
H2/3B
H2/3HE
H2/3H
H2/3H
H2/3H
H2/3H
H2/3H
H2/3HE
H2/3H
H2/3H
H2/3H
H2/3H
H2/3HE
a
b
ba
NURSE1094 4
b a
b a
b a
b a
b a
a
a
ab
b
ab
PROVIDEROFFICE1094C3
PROVIDEROFFICE1094D3
H2/3B
H2/3B
H2/3B
H2/17G
H2/17G
H2/17G
H2/17G
H2/17B
MAMMO1038
STAFFMOTHERS
ROOM
1031
3
3
2
2
1
H2/17W2
H2/17HE
H2/17H
H2/17HE
H2/17H
H2/17H
HALL1037
STAFF WORK1037A3
TOILET1040
H2/13HE
H2/13H
2
WAIT1036
HALLWAY1034A
HALLWAY1034B
VEST.1038A
H2/17A
H2/17A
H2/17H
H2/17A
H2/17A
H2/17A
H2/17A
H2/17A
H2/17G
1
CHANGE1039A
RADIOLOGY1039
H2/21B
H2/21BE
H2/21B
H2/21BE
H2/21B
H2/21B
H2/21BE
H2/21B
H2/19C4E
H2/19C4
H2/19C4
H2/19C4
HOUSEKEEPING1030 5
ba
a
ab
3
b a
aa
a a
H2/17E1
2
2H2/17
W2H2/17W2
H2/19D1
H2/17D1
H2/17D1
H2/17D1
H2/17D1
TOILET1033B
TOILET1033A
H2/19HE
i H2/19H
i H2/19H
i H2/19HE
i ii2
i
2
i
2
H2/19HE
i
H2/19HE
i
i2
HALLWAY1024
HALLWAY1025
3PHARMACY
COSULT1022
PHARMACYCONSULT
1021
3
H2/21K
H2/21KE
H2/21K
H2/21K
H2/21KE
H2/21K
H2/21K
H2/21K
H2/21K
H2/21K
H2/21KE
H2/21D1
H2/21D1E
H2/21D1
H2/21D2
H2/21D2
H2/21K
H2/21K
H2/21K
H2/21KE
H2/21K
H2/21K
H2/21K
H2/21K
H2/21W2
1
PHARMACYTOILET
1023B
PHARMACYOFFICE1023A
3
H2/21B
H2/21B
H2/21KE
H2/21K
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25B
H2/25HE
H2/25H
H2/25HE
H2/25B
H2/25HE
H2/25H
H2/25B
H2/25B
H2/25HE
H2/25D2
H2/25D2
H2/25D2
OUTREACH(CHELSEY)
1019
INSURANCE(SHELLEY)
1018
SWITCHBOARD1017
WORK1012RE-APPOINT/
PAYMENT1011
CENTRALREGISTRATION
1013
PRC(MIKALA)
1015
PRC(ASHLEY)
1014
33
3 3
3
PATIENTREG/
CONSULT
1016
3
j2
j2
j2
2 2
2 2
H2/23D1
j
H2/23D1E
j
H2/23D1E
j
H2/17W11
H2/17W6
H2/17W4
H2/17W4
H2/17W6
H2/17W11
2
2
2
2
Bio Hazard1043
MECH1042
STORAGE1041
STAFFBREAKROOM
1029OFFICE
1028OFFICE
1027
DATA1026
MEETINGROOM1002
VESTIBULE1001
MOTHERSROOM1009
WOMENSTOILET
1008
DRAW1133
MEN'STOILET
1010
PROCEDUREHALWAY
1100PROCEDURE
HALLWAY1105
HALLWAY1004
WAITING1007
HALLWAY1007A
STORAGE1002A
TRADITITIONALHEALING
1106
DENTALWAIT
1200
HALLWAY1005
REGISTRATIONHALL
1003
Hall1006
PHARMACYWORK1023
PHARMACYRETAIL1020A
OPTICALSALES
1153HALLWAY
1007B
PHARMACYWAITING
1020B
H2/1C8
H2/19H
H2/19H
H2/19H
H2/19H
H1H2 L1
L2
L3
L7
L8
L9
L10
H2/19B
H2/19B
H2/19B
H2/19B
H2/19E1
H2/17B
H2/17B
H2/19E1
3
k
k
k k
kk
3
3 3
H2/19H
H2/19E1
a a2 2
a a a a
a a
b
b b
b b b
b
b
b
b
b
b
b b
b
b
b
b
b
b
b
b
b
b b
b
b
H2/13HE
a
H2/13HE
a
i
H2/27CC
H2/27CC
4 4
H2/27DD
4
H2/27CC
4
MS2MS2-DS1MS2-DS2MS2-DS3RCP-H2
H2/21J4F H2/21
J4F
H2/21J4F H2/21
J4F
H2/21J4F H2/21
J4F
H2/13D1
H2/13D1
H2/13J4
H2/13J4E
H2/13J4
H2/13J4
a
a
a
a
a
H2/23J4E
H2/23J4
H2/23J4
H2/23J4
j
j
j
j
H2/23D1E
j
H2/23D1E
j
H2/23D1
j
?
H2/23D1
j
H2/39L24
H2/39L24
H2/37D2
H2/37D2
2
E2.1
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35L4
H2/35D1
H2/35D1
H2/35D1
H2/35D1E
H2/35D1
H2/35D1E
H2/35D1
H2/35D1
H2/35D1
H2/35D1
H2/35D2
H2/35D2
H2/35D2
H2/35D2
H2/37D1
H2/37D1E H2/37
J4E
H2/37J4
H2/37J4E
H2/37J4
H2/37J4
H2/37J4
H2/37J4
H2/37D1
H2/37D1
H2/37D1E
H2/37D1
H2/37D1E
H2/37D1E
H2/37D1E
H2/37D1
H2/37D1
H2/37D1
H2/37D1E
H2/37J4E H2/37
J4
H2/37J4
H2/37J4
H2/37J4E
H2/37J2
H2/37J2
H2/37J2
H2/37J2
H2/37J2
H2/37J2
H2/37J2
7
7
7
7
8 8 8 8
8
8
8
8
8
8
8
8
8 8 8 8
9 9
9
9 9
9
9 9
9 9
9 9
8,9
H2/35D1E
8,9
8,9
8,9
H2/35D1E
6
6
6
6
H2/37J2
H2/37J4
10 10
10 1010
10
10
10
1010
10
10
10
11
10 10
10
10
10
1010
1110
10
10
10
10
10
10
10
10
10 10
H2/37D1
H2/37D1
10,12
6
6
10,12
10
10
10
10,126
H2/39P2
H2/39P2
H2/39P2
a b
c
c
c
H2/39P1
H2/39P1
a
a
a
b b
a,b,c
a,b,c3
2
b
b
b
b
b
b
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
11
11
12
12
17
17
21
21
22
22
23
23
25
25
26
26
N
O
32
32
28
28
27
27
31
31
T
V
29
29
30
30
W
Y
AA
DD
EE
HH
II
JJ
KK
LL
MM MM
NN NN
24
24
16
16
15
15
10
10
GG
FF
BB
S
Q
P
H2/37J15F
10
H2/25D2
H2/25D2
H2/25D2
H2/25D2
7
7
7H2/35
P3H2/35
P3
H2/35P3
H2/35P3
7
H2/35P3
7
H2/35N7
7
H2/35D1E
9
H2/35D1E
9
H2/2RE
H2/2RE
H2/2RE
H2/2RE
H2/2RE
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E2.1
FLOOR PLAN -
SOUTH -
LIGHTING
EDI#19-002
6201061485
JAY S. HRUBY P.E.
NORTH
1/4" = 1'-0"E2.1
2 Section at High Vestibule - Room #1003
1/8" = 1'-0"E2.1
1 Floor Plan - South - Lighting
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
D
D
DD
OS OS OS OS OS
OSOSOS D D D
DDDDD
DD
DD
OS
OS
OS
OS
OS
OS
OS
OS
OS
D
OS
D
D
DDDD
D
D
D
DD
OS
OS
OSOS
OS
OS
OS
OS
OS OSOS OS
3
OS
OS
DD
D
OSOS
OS
OS
OS
OS
OS D
D
DD D
OS
OS
OS
OS
OS
OS
DD
D
D
D
D
D
D
D
D
OS
OS
OS
OS
OS
OS OS
OS
OS
OS
OSD
D
OS
OS
OS
OS OS
DD
OS OS
OS
OS
OS
OS
OS
D
D
D
D
OSOS
OS
OS
OSOS OS
OS
OS
OS
OS
OS
OS
OS
OS
D
D
DD
D
OSOS OS
OS
OS OS
OS
OS
OS OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
D
D
OS
D
DOS
D
OS
OS
OS
OS
D
OS
DD
GENERAL NOTES
PLAN NOTES
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/3B
H3/3B
H3/3B
H3/3BE
H3/3B
H3/3B
H3/3B
H3/3B
H3/3B
H3/3B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/1B
H3/3BE
H3/3B
H3/3BE
H3/3B
H3/3B
H3/3B
H3/3B
H3/3B
H3/3B
H3/3B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/7B
H3/9B
H3/9B
H3/9K
H3/9K
H3/9K
H3/9K
H3/9K
H3/9K
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/23B
H3/15B
H3/15B
H3/17B
H3/17B
H3/17BE
H3/17B
H3/17B
H3/19B
H3/19B
H3/5B
H3/5B
H3/5B
H3/5B
H3/5BE
H3/5B
H3/5B
H3/5B
H3/5B
H3/5B
H3/5BE
H3/5B
H3/5B
H3/5BE
H3/5B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9BE
H3/9B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9B
H3/9H
H3/17C4
H3/15C4
H3/15C4E
H3/19BE
H3/19B
H3/19B
H3/19B
H3/19B
H3/19B
H3/19B
H3/19BE
H3/17B
H3/17B
H3/17B
H3/17B
H3/17BE
H3/5W2
H3/5W2
H3/5W2
H3/9W2
H3/17W2
H3/17W2
H3/3B
H3/3BE
H3/21H
H3/21HE
H3/21E1
H3/21E2
H3/11E1
H3/19D2
H3/19D2
H3/19B
H3/19B
H3/19BE
H3/5HE
H3/5B
H3/5BE
H3/5B
H3/5G
H3/5G
H3/5AE
H3/5A
H3/5AE
H3/21HE
H3/21H
H3/21H
H3/21HE
H3/21H
H3/21H
H3/21HE
H3/21H
H3/21H
H3/21HE
H3/21H
H3/13H
H3/13HE
H3/13HE
H3/13H
H3/13H
H3/13HE
H3/13H
H3/13H
H3/13HE
H3/13H
H3/13HE
H3/13HE
H3/13H
H3/13H
H3/13HE
H3/21E1
H3/5HE
H3/5H
H3/5H
H3/11E1
H3/21HE
H3/21H
3
2
2
2
2
2
2 2
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
2
2 DENTALWAIT
1200
DENTALCONSULT
1201DENTALRECEPTION
1204
3
3
DENTALRECORDS
1203
PAN1205
DENTALHALLWAY
1207
STERILIZATION1208
2
bbb
1
3
TOILET1209
c c
cc
d
e
e
d
de
fg
f
f
g
g
h
h
i
i
j
k
k
j
jk
hi
MECH.1223
DENTALOFFICE
1217 3
DENTALOFFICE
1218
3
1
TOILET1220
LAB OFFICE243
3
DENTALEXAM1211
3DENTALEXAM1212
3DENTALEXAM1213
3DENTALEXAM1214
3
DENTALEXAM1215
3
DENTALEXAM1216
LAB1210
3
MECH ROOM1221
LOCKERS1222
1
2
k
j
i
h
g
f
e
d
HIM OFFICE(ANDREW)
1178 3
BILLINGOFFICE
(ASHLEY)
1177 3
ADMINOFFICE(DAN)
1176 3
ADMINOFFICE(TARA)
1175 3
ADMINOFFICE
(AUDREY)
1174 3
ADMINOFFICE
(YVONNE)
1173 3
ADMINOFFICE(ABBY)
1172 3
MEETING1144 3
MEETING1143 3
BILLING1171 3
BILLINGHALLWAY
1170
2
22
2
2
2
2
TOILET1145
1
ab
b
bbb
b b
a a a a
aaa
ab
ab
ab
a
REFERENCE1161
VISITATION1162
H.I.M1160 3
1
1
c c c c
c
c
c
cc
H2/13H
a
HALLWAY1140
HALLWAY1142
H2/13HE
a
H2/13H
a
H2/13HE
a
bH3/11H
bH3/11HE
bH3/11H
b
H2/15HE
hH3/11
H
d H3/11HE
d H3/11H
d H3/11H
d H3/11HE
d
a
b
222
2
2
b
b
b H3/11H
H3/11HE
b
H3/11H
b
H3/11HE
b
H3/11H
b
H3/11HE
b
h
d
2
2 2
d
a
2
OFFICE11263
OFFICE11253
OFFICE11243
OFFICE11233
OFFICE11223
OFFICE11213
OFFICE11203
OFFICE11193
OFFICE11183
OFFICE11163
OFFICE11153
OFFICE11123
Storage1111
IT1136
1
1
b2
b
b
GROUPTHERAPY
11133
PLAYTHERAPY
11143
H3/3G
H3/3G
1
1
STORAGE1114A
JAN.1107
B.H.HALLWAY
1110
B.H.HALLWAY
1117
PROCEDUREHALWAY
1100
PROCEDUREROOM (POSPRESSURE)
1102
TOILET1103
PROCEDUREROOM (POSPRESSURE)
1104
PROCEDUREHALLWAY
1105
PROVIDEROFFICE
1094D
CONSULT1101
HALLWAY1034B
MEN'STOILET
1010
HALLWAY1007B
WAITING
1007
Hall1006 HALLWAY
1005
PRC(ASHLEY)
1014
PRC(MIKALA)
1015
PATIENTREG/
CONSULT
1016
HALLWAY1034C
TOILET1137
SPECIMENTOILET1131B
SPECIMENTOILET
1131A
1
1
1
2
2
STAFF WORK1132 DRAW
11333
2
2
LAB1134
CONTACTS1152 3
WORKROOM1151
3
LAB OFFICE1135
3
3
OPTICALSALES
1153
H3/5HE
H3/5H
H3/5H
H3/5H
H3/5HE
H3/5H
H3/5H
H3/5D1
H3/5D1
H3/5D1
H3/5D1
H3/5D1
b b b
b
b
ab
a a a
a
a
aa
b
a
ab
a
a
a
a
OPTICALHALLWAY
1150
OPTICALEXAM
11543
OPTICALEXAM
11553
2
2
2H3/13
H
H3/13H
H3/13H
H3/13H
H3/13H
H3/13H
LAB HALL1131
WAITING1130
DENTALHALLWAY
1219
TRADITITIONALHEALING
1106
DENTALHALLWAY
1202
HALLWAY1141
L4
L6
L5
H3
L11
H2/27DD
4
H2/27CC
4
4
4
H2/27EE
H2/27EE
H2/27DD
4
H3/17D1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8 9
11
11
12
12
17
17 20
21
21
22
22
23
23
25
25
26
26
A A
B B
E E
F F
I
N
O
2410
S
Q
P
M
L
K
H
G
3
3
H3/1L12
H3/1L12 H3/1
D2
H3/1D2
H2/13D1
a
H2/13D1 a
H3/17B
H3/17B
A. PROVIDE AN ADDITIONAL ELECTRICAL CONNECTION TO ALL EMERGENCY LIGHT FIXTURES. ELECTRICAL CONNECTION TO BE FEED FROM UNSWITCHED LEG OF THE CIRCUIT FEEDING THE LIGHT FIXTURES IN THE ROOM/AREA THEY ARE LOCATED IN.
B. PROVIDE PROPER NUMBER OF CONDUCTORS AND CONTROL WIRES TO ACHIEVE CIRCUITING AND LIGHTING CONTROL AS SHOWN.
C. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THIS DRAWING.
D. ALL RECESSED LIGHTING FIXTURES IN LAY-IN CEILINGS SHALL BE INSTALLED WITH 6' LONG FLEXIBLE METAL CONDUIT.
E. ALL MOUNTING HEIGHTS FOR LIGHTING FIXTURES ARE TO THE BOTTOM OF THE FIXTURES UNLESS INDICATED OTHERWISE.
F. SEE ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS OF EXTERIOR LIGHTING FIXTURES.
G. CONDUIT AND WIRE SHALL NOT BE INSTALLED WITHIN THE COMPOSITE FLOOR SYSTEM.
H. CIRCUIT NUMBERS AT DEVICES CORRESPOND TO PANELBOARD BREAKERS (SEE PANELBOARD SCHEDULE). BRANCH CIRCUITS SHALL BE SIZED ACCORDING TO THE CIRCUIT BREAKER RATING, UNLESS INDICATED OTHERWISE ON THE ELECTRICAL EQUIPMENT SCHEDULE.
I. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 120 VOLT BRANCH CIRCUITS LONGER THAN 75 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.
J. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 277 VOLT BRANCH CIRCUITS LONGER THAN 175 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.
1. PROVIDE WALL MOUNTED DUAL TECHNOLOGY OCCUPANCY SENSOR FOR MANUAL ON/AUTOMATIC OFF CONTROL OF LIGHTING IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.
2. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S WITH REMOTE POWER PACK/S FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.
3. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF/RAISE/LOWER STATION FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.
4. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR, CEILING MOUNTED DAYLIGHT AND LOW VOLTAGE SWITCH/ES. PROVIDE 0-10 VOLT DIMMING CONTROLS SWITCH UNLESS NOTED OTHERWISE. (SIMILAR TO WATTSTOPPER DLM SERIES DAYLIGHT AND MOTION SENSOR) FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM.
5. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF SWITCH FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.
6. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S CONNECTED TO LIGHTING CONTROL RELAY PANEL FOR CONTROL OF LIGHTING AS SHOWN IN THIS SPACE.
7. SEE DETAIL 2/E2.1 FOR LIGHT FIXTURE TYPES AND MOUNTING LOCATIONS IN THIS SPACE.
1
1
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E2.2
FLOOR PLAN -
NORTH -
LIGHTING
EDI#19-002
6201061485
JAY S. HRUBY P.E.
NORTH
1/8" = 1'-0"E2.2
1 Floor Plan - North - Lighting
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
GENERAL NOTES
PLAN NOTES
48"
GFI
48"
GFI
AC
GFI
AC
GFI
GFI
GFI AC
GFI48"GFI
(2)
(2)
(2)
(2)
(2)
(2)
(2)
GFI
GFI
GFI
(2)
(2)
(2)
(2) (2)
AC
ACGFI
AC
GFI
AC
GFI
AC
GFI
GFI
GFI
GFI
GFI
GFI
GFI
ACGFI
AC
GFI
AC
GFI
48"GFI
48"GFI
ACGFI
ACGFI
ACGFI
GFIWP
GFIWP
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
AC
GFI
AC
GFI
(2)
(2)
(2) (2
)
(2)
(2)
(2)(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
AC
GFI
AC
GFIAC
GFI
AC
GFI
(4)
(4)
(4)
(4)
(2)
(2)
(2)
ACGFI
(2) (2
)
(2)
(2)
(2)
AC
AC
AC
AC
(2)
(2)
(2)A
CA
C
(2)
EWCGFI
96"
(2)
(2)96"
(4)
(4)
(4)
(4)
(4)
(4)
(4)
(4)
GFI
ACGFI
AC
GFI
(2)
(2)
AC
GFI
(2)
AC
SCR
SCR
SCR
S ES
S ES
SES
SES
SES
SCR
SCR
SCR
S ES
S
ES S
CR
S
SS
S
48"J
48"J
72"
72"
(2)72"
(2)72
"
S
ES S
CR
ACGFI
ACGFI
(2)
(2)
(2)
GFI
F
F
F
F
F
F
F
F
F
FF
F
F F
F
F
F
F
FF
F
F
FP
F
P
F
P
F P
F
P
F
F
F F
F F
FF
F F
F
F
F
F
F
F
F
F
F
F F
F
F
F
F
FF
F
F
F
FF
F F
F
F
F
F F
F
F
F
F
F
F
F
FF
F
FF
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
EW
CG
FI
AC
GFI
AC AC
EW
CG
FI
(2)
(2)
(2)
(2)
GFI
60"
GFI
GFI
(2)
(2)
(2)
(2)
F
GFIWP
(2)
(2)
EPO
EPO
EPO
F
S
ES
S
CR
S
CR
S
CR
S
ESS
ES
S ES
S
ES
SCR
S CR
S
CR
S
CR
S
CR
S
CR
S
CR
SCR
S ES
S
ES
S
ES
S
ES
S
ES
S
ES
SES
S
ES
S
ES
SCR
S
CR
S CR
SCR
SES
F
F
F
F
S
SCR
SES
W
J
AC
GFI
GFI
(2)
N3
N3
N1
N1
P
S S
S S S
N3
N3
N3
N3
N3
N3
SSS
S S S
SSS
N3
N3
N3
N3
N3
N3
N1
P
P
N1
N3
S
S N3
A. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THE DRAWINGS, EXCEPT ITEMS LISTED ON SHEET E0.01 GENERAL ELECTRICAL NOTES.
B. SEE FIRE ALARM ZONE SCHEDULE FOR INITIATING ZONES AND SIGNAL CIRCUITS.
C. MAXIMUM NUMBER OF 4 INFORMATION OUTLET LOCATIONS PER CONDUIT HOME RUN TO MDF OR IDF IS PERMITTED. CONDUIT SHALL BE SIZED AS FOLLOWS:
a. 1 INFORMATION OUTLET LOCATION: 1"b. 2 INFORMATION OUTLET LOCATIONS: 1 1/4"c. 3 INFORMATION OUTLET LOCATIONS: 1 "
D. 1/2"INSTALL CONDUIT WITH NO MORE THAN (2) 90° BENDS BETWEEN PULL BOXES, AND NO MORE THAN 100'-0" BETWEEN PULL BOXES. PULL BOXES SHALL BE INSTALLED FOR STRAIGHT THRU PULLS ONLY.
E. ALL COMMUNICATIONS CABLES SHALL BE INSTALLED IN CONDUIT, CABLE TRAY, OR SUPPORTED BY CABLE HOOKS. PROVIDE BUSHINGS AT THE ENDS OF ALL CONDUIT WHERE STUBBED ABOVE ACCESSIBLE CEILINGS OR WHERE DROPPED INTO CABLE TRAY. PROVIDE CABLE HOOKS ABOVE ACCESSIBLE CEILINGS FOR CABLE INSTALLATION WHERE NOT INSTALLED IN CONDUIT OR CABLE TRAY.
1. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
2. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE TWO (2) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
3. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE FOUR (4) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
4. FURNISH AND INSTALL ONE CATEGORY 6 CABLE FROM THIS LOCATION (PROVIDE 15 FOOT SERVICE COIL OF CABLE ABOVE THE CEILING) TO DATA ROOM #1026, FOR WIRELESS ACCESS POINT FURNISHED AND INSTALLED BY OTHERS. MAKE ALL TERMINATIONS.
5. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE AND ONE (1) RG6 COAXIAL FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
6. PROVIDE ROUGH-IN FOR DOOR SECURITY. SEE DETAIL 5/E7.2 AND DOOR HARDWARE SCHEDULE FOR ADDITIONAL INFORMATION.
7. CCTV CAMERA. PROVIDE ONE CAT 6 CABLE WITH 15'-0" SERVICE LOOP AT THIS LOCATION ROUTED TO AND TERMINATED AT A DEDICATED POE CCTV PATCH PANEL IN IT ROOM #1026.
8. FURNISH AND INSTALL TWO (2) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
9. FURNISH AND INSTALL FOUR (4) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.
10. PROVIDE DISCREET DOOR LOCK DOWN BUTTON AND ALL CONTROL WIRING FOR REMOTE LOCKDOWN FOR POWERED DOOR OPERATOR PD0-1000B.
11. REFER TO DRAWING E5.4 FOR ADDITIONAL ELECTRICAL ROUGH-IN AND INSTALLATION INFORMATION.
12. REFER TO DRAWING E5.5 FOR ADDITIONAL ELECTRICAL ROUGH-IN AND INSTALLATION INFORMATION.
E5.2
1Sim
COMMUNITYHEALTH(CONNIE)
1054
COMMUNITYHEALTH
(SHELBY)1053
COMMUNITYHEALTH
(JOANNT)1052
AMBULANCEHOLD (negpressure)
1051
COMMUNITYHEALTH
(THERESA)
1059
COMMUNITYHEALTH
(GINA HE)
1058
COMMUNITYHEALTH
(STEPHANIE)
1057
EXAM1084
EXAM1079
EXAM1083
EXAM1078
EXAM (NEGPRESSURE)
1082
EXAM1077
EXAM1074
EXAM1073
EXAM1072
COMMUNITYHEALTH
(BRENDA)
1060
FLEX OFFICE1075
NURSESUPERVISOR
(BETTY)
1065
COMMUNITYHEALTH
1064
PROCEDUREROOM (POSPRESSURE)
1102
MEETINGROOM
1002
PROVIDEROFFICE
1094D
PROVIDEROFFICE1094A
DATA1026
OFFICE1028
OFFICE1027
PHARMACYTOILET
1023B
PHARMACYCONSULT
1021
PHARMACYCOSULT
1022
OUTREACH(CHELSEY)
1019
PRC(ASHLEY)
1014PATIENT
REG/CONSULT
1016
PRC(MIKALA)
1015
SWITCHBOARD1017
INSURANCE(SHELLEY)
1018
VESTIBULE1001
C.H. WorkRoom
1056
CONSULT1071
TOILET1103
PROCEDUREROOM (POSPRESSURE)
1104
TRIAGE (NEGPRESSURE)
1081
TOILET1035
CONSULT1101
TOILET1033B
TOILET1033A
HOUSEKEEPING1030
RADIOLOGY1039
CHANGE1039A
MOTHERSROOM
1009
TOILET1040
WOMENSTOILET
1008
WAIT1036
STAFF WORK1037A
STAFFMOTHERS
ROOM
1031
HALL1037
MAMMO1038
MECH1042
COMMUNITYHEALTH
(TRANSPORT)
1055
EXAM1086
EXAM1087
EXAM1088
CLEAN
1091
SCALE1085
SCALE1076
MEN'STOILET
1010
NURSE1094
PROVIDEROFFICE1094C
PROVIDEROFFICE1094B
PROCEDUREHALWAY
1100
C.H.HALLWAY
1050
EXAMHALLWAY
1070
C.H.HALLWAY
1061
PROCEDUREHALLWAY
1105
STAFFBREAKROOM
1029
HALLWAY1034A
HALLWAY1034B
EXAMHALLWAY
1080
CENTRALREGISTRATION
1013
WORK1012
RE-APPOINT/PAYMENT
1011
HALLWAY1004
WAITING1007
HALLWAY1007A
STORAGE1002A
VEST.1038A
TRADITITIONALHEALING
1106
DENTALWAIT1200
HALLWAY1005
REGISTRATIONHALL1003
HALLWAY1024
Hall1006
COMMUNITYHEALTH
1062
COMMUNITYHEALTH
1063
STAFFTOILET
1070A
STAFFHALLWAY
1090
MED1093
SOILED1092
PHARMACYOFFICE1023A
PHARMACYWORK1023
PHARMACYRETAIL1020A
E5.2
2Sim
INTERCOM MASTERSTATION.
INTERCOM ENTRYSTATION.
INTERCOM ENTRYSTATION
2
2
2
2
22
22
2 2
22
2
2
2
2
2
2
222
2
2
2
2
2
2
2
2
2
2 2
2
2
2
2
2
2
2222
22 2 2
2
222
2222
2
222
5
5
2
STORAGE1041
Bio Hazard1043
OPTICALSALES1153
HALLWAY1007B
PHARMACYWAITING
1020B
HALLWAY1025
FACP
2
6
6
6
6
6
6 6
6
6
6
66
6
6 6
6
66
6
6
FSD-1
FSD-2
FSD-3
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
11
11
12
12
17
17
21
21
22
22
23
23
25
25
26
26
N
O
32
32
28
28
27
27
31
31
T
V
29
29
30
30
W
Y
AA
DD
EE
HH
II
JJ
KK
LL
MM MM
NN NN
24
24
161510
10
GG
FF
BB
S
Q
P
FSD-7
9 9
99
2
2
7
7
7
7
7
7
7
7 7
7
7
7
6
PDO-1000B PDO-1000A
10
10
7
7
7
7
2
21
11
12
L7
L10
T-L1
L1H1H2RCP-H2
L2
L3
1 1
1
1 1 1
1 1 1
NURSE CALLMASTERPANEL
1
1 1 1
1 1 1
1
1
1
1
NC
M
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E4.1
FLOOR PLAN -
SOUTH -
SYSTEMS
EDI#19-002
6201061485
JAY S. HRUBY P.E.
NORTH
1/8" = 1'-0"E4.1
1 Floor Plan - South - Systems
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
GENERAL NOTES
PLAN NOTES
GFI
GFI
GFI
GFI
GFI
GFI
GFIWP
GFIWP
(2) AC
GFI
AC
GFIAC
GFI
AC
GFI
(4)
(4)
(4)
(4)
(2)
(2)
EWCGFI
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
AC
GFI
AC
GFI
(2)
(2)
(2)
(2)
GFI
(2)
(2)
(2)
(2)
(2) (2
)
(2)
(2) (2
)
(2) (2) (2) (2)
AC
GFI
AC
(2)
AC
(2)(2)
(2)
(2)
(2)
GFI
AC
GFI
ACGFI
AC
GFI
AC
GFI
AC
GFI
ACGFI
48"GFI
48"GFI
ACGFI
ACGFI
ACGFI
AC
GFI
AC
GFI
GFI
GFI
GFI
GFI
(2)
(2)
AC
GFI
AC
GFI
(2)
AC
GFI
(2)
(2)
AC
GFI
AC
GFI
TR
TR
TR
TR
(2)
AC
GFI
AC
GFI
ACGFI
AC
GFI
AC
GFI
AC
GFI
AC
GFI
AC
GFI
GFI
AC
GFI
GFI
AC
GFI
48"
48"
(2)
AC
(2)
AC
(4)
(4)
AC
SCR
S CR
48"72"
(2)72"
L5-20R
L5-30R
AC
GFI
(2)
AC ACAC AC
F
F
F
F
FF
F
F
F
F
F
F
FFF
F
F
P
F
P
F
P
F F
F F
F
F
F
F
F
F
F
F
F F
F
F
F
F
F FF
F
F
F
F
F
F
F
F
FF
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
FF
F
F
F
F
F
F
F
F
FF
F
F
F
F
J
54"
S ES
76"
(2)
(2)
72"
(2)
GFI
GFI(2)
(2)
F
GFIWP
S
CR
S
ES
S
CR
S
ES
S ES
SCR
S
CR
S
CR
S
ES
S
ES
S
ES
S
CR
S
CR
S
ES
P P
(4)
(4)
F
F
F
S
ES
SCR
SCR S
CR
S CR
SES
S
ES
SES
SES
S
CR
76"
76"
(2)72"
(2)72"
(2)AC
(2)AC
44"GFI
J44"GFI
44"GFI
44"GFI
44"GFI
J44
"G
FI44
"G
FI
JJ
44"GFI
44"GFI
GFI
44"GFI
N3
N3
N1
N1
P
S S
A. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THE DRAWINGS, EXCEPT ITEMS LISTED ON SHEET E0.01 GENERAL ELECTRICAL NOTES.
B. SEE FIRE ALARM ZONE SCHEDULE FOR INITIATING ZONES AND SIGNAL CIRCUITS.
C. MAXIMUM NUMBER OF 4 INFORMATION OUTLET LOCATIONS PER CONDUIT HOME RUN TO MDF OR IDF IS PERMITTED. CONDUIT SHALL BE SIZED AS FOLLOWS:
a. 1 INFORMATION OUTLET LOCATION: 1"b. 2 INFORMATION OUTLET LOCATIONS: 1 1/4"c. 3 INFORMATION OUTLET LOCATIONS: 1 "
D. 1/2"INSTALL CONDUIT WITH NO MORE THAN (2) 90° BENDS BETWEEN PULL BOXES, AND NO MORE THAN 100'-0" BETWEEN PULL BOXES. PULL BOXES SHALL BE INSTALLED FOR STRAIGHT THRU PULLS ONLY.
E. ALL COMMUNICATIONS CABLES SHALL BE INSTALLED IN CONDUIT, CABLE TRAY, OR SUPPORTED BY CABLE HOOKS. PROVIDE BUSHINGS AT THE ENDS OF ALL CONDUIT WHERE STUBBED ABOVE ACCESSIBLE CEILINGS OR WHERE DROPPED INTO CABLE TRAY. PROVIDE CABLE HOOKS ABOVE ACCESSIBLE CEILINGS FOR CABLE INSTALLATION WHERE NOT INSTALLED IN CONDUIT OR CABLE TRAY.
1. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
2. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE TWO (2) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
3. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE FOUR (4) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
4. FURNISH AND INSTALL ONE CATEGORY 6 CABLE FROM THIS LOCATION (PROVIDE 15 FOOT SERVICE COIL OF CABLE ABOVE THE CEILING) TO DATA ROOM #1136, FOR WIRELESS ACCESS POINT FURNISHED AND INSTALLED BY OTHERS. MAKE ALL TERMINATIONS.
5. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE AND ONE (1) RG6 COAXIAL FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
6. PROVIDE ROUGH-IN FOR DOOR SECURITY. SEE DETAIL 5/E7.2 AND DOOR HARDWARE SCHEDULE FOR ADDITIONAL INFORMATION.
7. CCTV CAMERA. PROVIDE ONE CAT 6 CABLE WITH 15'-0" SERVICE LOOP AT THIS LOCATION ROUTED TO AND TERMINATED AT A DEDICATED POE CCTV PATCH PANEL IN IT ROOM #1136.
8. FURNISH AND INSTALL TWO (2) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
9. FURNISH AND INSTALL FOUR (4) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.
Storage1111
OFFICE1122
OFFICE1123
OFFICE1124
OFFICE1125
PROCEDUREROOM (POSPRESSURE)
1102
OFFICE1118
OFFICE1119
OFFICE1120
BILLINGOFFICE
(ASHLEY)
1177
ADMINOFFICE(DAN)
1176
ADMINOFFICE(TARA)
1175
DENTALOFFICE
1218
OFFICE1126
PROVIDEROFFICE
1094D
PRC(ASHLEY)
1014
CONTACTS1152
TOILET1137
SPECIMENTOILET1131B
LAB1134
LAB HALL1131
SPECIMENTOILET1131A
LAB OFFICE1135
WORKROOM1151
OPTICALEXAM1155
OPTICALEXAM
1154
VISITATION1162
REFERENCE1161
TOILET1145
H.I.M1160
MEETING1143
MECH ROOM1221
HIM OFFICE(ANDREW)
1178
LOCKERS1222
PAN1205
PATIENTREG/
CONSULT
1016
PRC(MIKALA)
1015
DENTALCONSULT
1201
TOILET1220
LAB OFFICE243
LAB1210
TOILET1103
PROCEDUREROOM (POSPRESSURE)
1104CONSULT
1101
OFFICE1116
PLAYTHERAPY
1114
GROUPTHERAPY
1113
OFFICE1115
OFFICE1112
WAITING1130
DRAW1133
STAFF WORK1132
MEN'STOILET
1010
B.H.HALLWAY
1117
B.H.HALLWAY
1110
PROCEDUREHALWAY
1100PROCEDURE
HALLWAY
1105
HALLWAY1142
HALLWAY1140
BILLING1171
DENTALHALLWAY
1207
DENTALRECORDS
1203
DENTALRECEPTION
1204
DENTALHALLWAY
1219
STORAGE1114A
JAN.1107
BILLINGHALLWAY
1170
TRADITITIONALHEALING
1106
OFFICE1121
ADMINOFFICE(ABBY)
1172
MEETING1144
ADMINOFFICE
(YVONNE)
1173
ADMINOFFICE
(AUDREY)
1174
DENTALEXAM1215
DENTALOFFICE
1217
DENTALHALLWAY
1202
DENTALEXAM1211
DENTALEXAM
1212
DENTALEXAM
1213
DENTALEXAM
1214
DENTALWAIT
1200
DENTALEXAM
1216
MECH.1223
HALLWAY1005
Hall1006
IT1136
2
2 2 2 2 2
222
2
2
29
2
2
2
2
2
2
2
2
22 2 2 2
2 2 2 22
222
2
2
2
2
2
2
2
OPTICALSALES1153
HALLWAY1007B
HALLWAY1141
HALLWAY1034C
OPTICALHALLWAY
1150
2
2
6
6
6
6
6
6
FSD-4
FSD-5 FSD-6
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8 9
11
11
12
12
17
17 20
21
21
22
22
23
23
25
25
26
26
A A
B B
E E
F F
I
N
O
24
24
10
S
Q
P
M
L
K
H
G
22
9E5.3
2Sim
7
7
7
7
7
666
6
2
2
2 2
L4
L6
L5
L12
L11
H3
11
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E4.2
FLOOR PLAN -
NORTH -
SYSTEMS
EDI#19-002
6201061485
JAY S. HRUBY P.E.
NORTH
1/8" = 1'-0"E4.2
1 Floor Plan - North - Systems
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
RJ45
(Typical)
RJ45 Port(Typical)
RJ45
(Typical)
RJ45
(Typical)
3RU-FIBER
3RU-FIBER
3RU-FIBER
3RU-FIBER
3RU-FIBER
IT ROOM #1136MAIN SERVERROOM #1026.
12-STRAND, ARMORED, OM4CLASSIFICATION, MULTI-MODEPLENUM RATED, PLUS 12-STRAND,ARMORED SINGLE MODE OPTICALFIBER CABLE
MAIN TELECOMMUNICATIONSGROUND BUS, REFER TO 3/E7.2FOR ADDITIONAL INFORMATION.
TELECOMMUNICATIONS GROUNDBUS, REFER TO 3/E7.2 FORADDITIONAL INFORMATION.
TELECOMMUNICATIONS GROUNDCONDUCTOR, REFER TO 1/E7.2FOR ADDITIONAL INFORMATION.
50-PAIR, COPPER VOICEBACKBONE CABLE,PLENUM RATED.
P
L
N
120VAC
VIO
GR
Y
LMLS-400Photosensor
*DLM OccupancySensor
*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.
LMRJ-C8Coupler
LMDM-101Dimming Switch
0-10VDC DimmingBallast required.
Class 1 0-10 VoltControl Wiring
LMRJ Series Pre-TerminatedCables or CAT5e. Free Topology& Splitter Acceptable
120/230/277
Red
Hot Blk
Neutral Wht
LightingLoad
LMRC-211Dimming Room
Controller
Vio
Gry
Red
Neutral Wht
LightingLoad
(a)
LightingLoad
(b)
Yel
UnswitchedHot Blk120/277
*DLM OccupancySensor
*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.
LMRC-212Dual Relay
On/Off/0-10V Dimming
Room Controller
LMRJ-C8Coupler
EarthGround
Grn
Red
Neutral Wht
LightingLoad
(a)
LightingLoad
(b)
Yel
LightingLoad
(c)
Blu
UnswitchedHot Blk120/277
*DLM OccupancySensor
*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.
LMRC-213Triple Relay
On/Off/0-10V Dimming
Room Controller
LMRJ-C8Coupler
EarthGround
Grn
LMLS-400Photosensor
LMLS-400Photosensor
Vio
Gry
Vio
Gry
Vio
Gry
Vio
Gry
Vio
Gry
VIO
GR
Y
VIO
GR
Y
VIO
GR
Y
VIO
GR
Y
VIO
GR
Y
Class 1 0-10 VoltControl Wiring
Class 1 0-10 VoltControl Wiring
LMDM-101Dimming Switch
LMDM-101Dimming Switch
LMDM-101Dimming Switch
LMDM-101Dimming Switch
LMRJ Series Pre-TerminatedCables or CAT5e. Free Topology& Splitter Acceptable
LMRJ Series Pre-TerminatedCables or CAT5e. Free Topology& Splitter Acceptable
*DLM OccupancySensor
*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.
*DLM OccupancySensor
*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.
Control Output
Common
+24VDC
Neutral
Hot
Wht
Blk
Re
d
Blk
Power Pack
Blu
SensorCeiling/Wall24VDCAny
Red
Red
Lighting Load
BZ-200
**Ground
*ToAdditionalSensor(s)
Off
Switch
Local
Optional
and Sensor(s)One BZ-200 Power Pack
Red
Red
Common
+24VDC
Control Output
Hot
Neutral
Blk
Wht
MANUAL ON
BZ-250(A)
Bro
wn
Bla
ck
Gre
y
Ora
ng
e
Re
d
Blu
e
Cap
Cap COM
SW1
LVSW-101Low VoltageSwitch Input
**Ground
Lighting Load
(A)
BZ-250 Power Pack Bi-LevelControl with MANUAL ON
SensorCeiling/Wall24VDCAny
*ToAdditionalSensor(s)
METAL CLADE CABLE CONCEALED ANDFASTENED TO TOP OF STRUCTURAL BEAM.
SELECT GRADE DIMENSIONAL DOUGLASFIR BLOCKING. FINISHED TO MATCHSTRUCTURAL BEAM.
REMODELER STYLEOCTOGON BOX.
LAMINATED DOUGLAS FIRSTRUCTURAL TRUSS
FIXTYURE TYPE 'S'. TYPICAL.
RUSSELLSTOLL RECEPTACLE#DF2504FRAB WITH SPRING COVER
600-VOLT, 3-PHASE, 200/3 NEMA 3RDISCONNECT FUSED AT 150 AMP.
GROUND ROD
#1/0 AWG COPPER MINIMUM
STEEL COLUMN MOUNTED IN CONCRETEFOOTING.
3'-0
"
HAND HOLE
C C
wsv wsv
NOTE:WATER SOLENOID VALVES SHALLCLOSE WHEN POWER IS APPLIED.
120 VOLT COIL20 AMP CONTACTSRIB RELAY
SWITCH W/PILOT LIGHT
10Fixture Type 'S' Mounting DetailSCALE: NO SCALE
9Mobile MRI Connection DetailSCALE: NO SCALE
2Two-Relay - Room Level Lighting ControlSCALE: NO SCALE 1
One-Relay - Room Level Lighting ControlSCALE: NO SCALE3
Three-Relay - Room Level Lighting ControlSCALE: NO SCALE
6Typical Single-Level Lighting Control DetailSCALE: NO SCALE
7Typical Single-Level Lighting Control DetailSCALE: NO SCALE
11Water Solenoid Valve Control DiagramSCALE: NO SCALE12
Communications Riser DiagramNOT TO SCALE
1
1
1
ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ
ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë
ïïïKÇëÖïKÅçã
Çê~ïå=ÄóW
ÅÜÉÅâÉÇ=ÄóW
íóéÉÇLéêáåíÉÇ=å~ãÉW
êÉÖK=@W
ëáÖå=Ç~íÉW
Ç~íÉW
éêçàÉÅí=@W
ëáÖå~íìêÉW
f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK
ëÜÉÉí=íáíäÉW
ëÜÉÉí=åìãÄÉêW
1112 North 5th StreetMinneapolis, MN 55411
(612) 343-5965
1624 North Riverfront DriveMankato, MN 56001
(507) 625-7869
018131.00
07/06/2020
GTN
JSH
07/06/2020
Bay Mills
Health
CenterProject Address
Brimley, Michigan
E7.3
DETAILS -
ELECTRICAL
EDI#19-002
6201061485
JAY S. HRUBY P.E.
êÉîáëáçå=LáëëìÉ åçK Ç~íÉ
^ÇÇÉåÇìã=@O MULOMLOMOM
1