Oct 18, 2019
Page 1 of 29
Session 01 (Lecture Room No 1)
Monday, October 21, 2019 Time 11:00-12:40
Chairperson: Lin Liu and T.I. Khan
11:00 19-249 KN Recent Trends in Additive Manufacturing
Waseem Haider, USA 11:40 19-196 KN Recent Development of Materials for the New Generation of
Higher Efficiency Power and Process Plant Ahmed Shibli, United Kingdom
12:20 19-149 Microstructural Evolution upon Laser Surface Melting and Mo Addition on Plasma Transferred Arc Deposited M2 High Speed Steel Hard Facings
Shaikh Asad Ali Dilawary, Pakistan
12:40-14:00 Lunch Break
Session 02 (Lecture Room No 1)
Monday, October 21, 2019 Time 14:00-15:40
Chairperson: F. A. Khalid and Waseem Haider
14:00 19-91 KN Fabrication, Characterization, and Optimization of Cold-Crucible Based Rapidly Solidified Ti Powders for Additive Manufacturing
Taek Soo Kim, South Korea
14:40 19-65 KN Phase Study of Heat Treated CoCrFeNiTi0.5 High Entropy Alloy Powder
Bum Sung Kim, Muhammad Aneeq Haq, Noh Su, Eom Nu Si A, South Korea
15:20 19-N6 Enhanced Piezoelectricity in TA45 Modified (K0.5Na0.5)NbO3 Ceramics to Texture Engineering
Ali Hussain, Pakistan
15:40-16:00 Tea Break
Session 03 (Lecture Room No 2)
Monday, October 21, 2019 Time 14:00-15:40
Chairperson: Shahid Akhtar and Hadia Noor
14:00 19-56 Effect of Nano-Silica Volume Reinforcement on the Microstructure, Mechanical, Phase Distribution and Electrochemical Behavior of Pre-Alloyed Titanium-Nickel (TiNi) Powder
Oct 18, 2019
Page 2 of 29
Syed Abbas Raza, Muhammad Imran Khan, Mairaj Ahmad, Asim Iltaf, Danish Tahir, Pakistan
14:20 19-189 Development of Doped Graphene Oxide-Based Electrodes for Super Capacitor
Umar Latif, Mohsin Ali Raza, Zaeem Ur Rehman, Pakistan
14:40 19-48 Manganese Oxide-Based Hybrid Electrodes for Supercapacitor Applications
Zaeem Ur Rehman, Mohsin Ali Raza, Uzair Naveed, Aoun Hussnain, Farasat Ali, Pakistan
15:00 19-136 Graphene Based Nanocomposites for Photocatalysis and Biomedical Applications
Aqsa Arshad, Aqsa Arshad, Pakistan
15:20 19-85 Synthesis of Silver Impregnated Graphene Oxide and Reduced Graphene Oxide by Re-Modified Hummers Method & its Application for Water Treatment
Shahid Bhutto, Muhammad Yasir Khan, Nusrat Jalbani, Shehzad Khan Pakistan
15:40-16:00 Tea Break
Session 04 (Lecture Room No 3)
Monday, October 21, 2019 Time 14:00-15:40
Chairperson: Ahmed Shibli and Sara Qaiser
14:00 19-78 Effect of Rare Earth Elements on Structural, Dielectric, Electrical Polarization and Microwave Absorption Properties of R-Type Hexaferrites
Imran Sadiq, Pakistan
14:20 19-132 Failure Analysis of an Aerospace Grade GFRP Composite Shell Muhammad Haroon Qaiser, Imran Nazir, Amjad Ali, Hamid Zaigham,
Pakistan 14:40 19-115 Strip Size Optimization for Spiral Type Actuator Coil Used in
Electromagnetic Flat Sheet Forming Experiment Shakeel Akbar, F. Pirndad, M. A. Aleem, Pakistan
15:00 19-7 Effect of Precursor Graphite on the Thermal Contact Resistance of Thermally Reduced Graphene Oxide/Silicone Composites Developed for Thermal Interface Applications
Mohsin Ali Raza, Paksiatn
15:20 19-246 Eu Doped Alumina for Simultaneous PL Imaging and Drug Delivery
Numrah Sultan, Syed Mujtaba ul Hassan, Pakistan
Oct 18, 2019
Page 3 of 29
15:40-16:00 Tea Break
Session 05 Monday, October 21, 2019 Time 16:00-17:15
Exhibition (Open for All Participants during 21-25 October 2019)
17:15-17:25 Ice Cream
Session 06 (Lecture Room No 1)
Tuesday, October 22, 2019 Time 09:00-10:40
Chairperson: Zulfiqar Ahmed and Hamid Zaigham
09:00 19-53 KN Surface and Structural Characterization of High Voltage Overhead Electrical Conductors: Ageing and Environmental Effects
Amir Azam Khan, Lim Soh Fong, David Bong Boon Liang, Andrew Ragai Henry Rigit, Malaysia
09:40 19-125 KN A Unified Multiscale Elevated Temperature Damage and Crack Growth Prediction of Advanced Alloys
Kamran Nikbin, United Kingdom 10:20 19-58 Temperature Dependent Thermal and Impedance Response of
NiO/Fe2O3 Composite and Compound Nanoparticles Omer Farooq, M. Anis-ur-Rehman, Anwar ul Haq, Pakistan
10:40-11:00 Tea Break
Session 07 (Lecture Room No 1) Tuesday, October 22, 2019 Time 11:00-12:40
Chairperson: Taek Soo Kim and Javed Ahmad
11:00 19-47 KN Nanomaterial Enhanced Low Carbon Technology Solutions for Energy Capture, Generation and Storage
Zulfiqar A Khan, United Kingdom
11:40 19-31 KN Nanoparticle Enhanced Diffusion Bonding Process Tahir I. Khan, United Kingdom
12:20 19-288 3D Woven Composite Materials for Ballistic Applications Yasir Nawab, Pakistan
12:40-14:00 Lunch Break
Oct 18, 2019
Page 4 of 29
Session 08 (Lecture Room No 1)
Tuesday, October 22, 2019 Time 14:00-15:40
Chairperson: Amir Azan Khan and Kim Bum Sung
14:00 19-VL1 Video Lec.
Processing of Titanium Alloys
Bradly P Wynne, United Kingdom
14:40 19-37 KN Modified ZnO Nanoparticles Thin Films as Visible Light Photocatalysts for Wastewater Treatment
Mohamed Abou El-Fetouh Barakat, Jamshaid Rashaid, Saudi Arabia
15:20 19-287 In-Vitro Study of Commercially Pure Titanium After Ultrasonic Surface Mechanical Attrition Treatment (SMAT)
Kamran Yaseen, Pakistan
15:40-16:00 Tea Break
Session 09 (Lecture Room No 2)
Tuesday, October 22, 2019 Time 11:00-12:40
Chairperson: Ahmed Shibli and Anjum Tauqir
11:00 19-45 La0.7Sr0.3Mn1-XBxO3 (B=Mo, Ti) Nanoparticles for Self- Controlled Hyperthermia
Jihed Makni, Kalthoum Riahi, Firas Ayadi, Virginie Nachbaur, Wissem Cheikhrouhou-Koubaa, Muhammad Asif Hamayun, Mohamed Koubaa, Sadia Manzoor, El-Kbir Hlil, Abdelwaheb Cheikhrouhou, Tunisia
11:20 19-264 Biocompatibility and Toxicity of Gold Nanoparticles Biosynthesized using Monotheca Buxifolia Leaf Extract
Asma Shah, Ghosia Lutfullah, Kafeel Ahmad, Ali Talha Khalil, Khalid Khan, Ghazala Shah, Aftab Ahmad, Pakistan
11:40 19-245 Preparation of Al2O3 Whiskers from AACH Using Hydrothermal Method and Its Use for the Removal of Lead Ions by Adsorption
Asma Ameer, Syed Mujtaba-Ul-Hassan, Syed Muhammad Husnain, Mirza Jamil Ahmad, Fahad Ali, Pakistan
12:00 19-127 Synthesis and Characterization of Rare Earth Substituted M -Type (Sr-Ba) Hexaferrites
Hasan Mehmood, Hasan, Pakistan
12:20 19-110 Novel Yet Simple Nano-Fluid Treatment of Transformer Oil to Improve Dielectric Breakdown Strength
Saim Saher, Affaq Qamar, Kamran Alam, Pakistan
Oct 18, 2019
Page 5 of 29
12:40-14:00 Lunch Break
Session 10 (Lecture Room No 2)
Tuesday, October 22, 2019 Time 14:00-15:40
Chairperson: A. Cheikhrouhou and Ali Dad Chandio
14:00 19-236 Influence of Zinc Oxide Nanoparticales on Mechanical and Dielectric Properties of Nanocomposities
Hadia Noor, Safir Ullah Khan, Atia Zafar, Saira Riaz, Shahzad Naseem, Pakistan
14:20 19-96 Surface Modification of AZ31B Magnesium Alloy by Microarc Oxidation Method
Ahsan Saleem, Ameeq Farooq, Kaab Bin Tayyab, Abdus Salam, Pakistan
14:40 19-244 Magnetic, Magnetothermal and Magnetocaloric Effect of Ni100-XGex and Ni0.9Cu0.1-XGex Thermoseeds for Self-Controlled Hyperthermia
M Hisham Alnasir, Pakistan
15:00 19-168 Hydrothermal Synthesis of Metal Sulfides via Single Source Precursors for Supercapacitors
Sadia Khalid, Pakistan
15:20 19-204 Crack Repairing of Aluminum Alloy 6061 by Reinforcement of Al2O3 and B4C Particles Using Friction Stir Processing
Zunair Masroor, Ahsan Abdul Rauf, Faisal Mustafa, Syed Wilayat Husain, Pakistan
15:40-16:00 Tea Break
Session 11 (Lecture Room No 3)
Tuesday, October 22, 2019 Time 11:00-12:40
Chairperson: Waseem Haider and Muhammad Yasir Khan
11:00 19-289 Nanoparticle Enhanced Transient Liquid Phase Bonding Process Tahir I. Khan, M. A. Baloch Shar, K. O. Cooke, M. H. Khan, A. AlHazaa,
United Kingdom
11:20 19-105 Development of an Indigenous Hail Testing Machine to Analyze the Reliability of Photovoltaic Modules
Hafiz Basit Ali, Rizwan Mahmood Gul, Muhammad Ali Kamran, Syed Nouman Ali Shah, Pakistan
11:40 19-221 Improving the Corrosion Resistance of API X56 and API X70 Pipeline Steels by Hot Dip Aluminization
Oct 18, 2019
Page 6 of 29
Muhammad Ramzan Abdul Karim, Akhlaq Ahmad, Ehsan Ul Haq, Sanam Daniel, Khurram Imran Khan, Pakistan
12:00 19-25 Electrophoretic Deposition of Chitosan/Gelatin/Silver – Strontium Doped Mesoporous Bioactive Glass Nanoparticles on PEEK/Bioactive Glass Layers for Orthopedic Implants
Shaher Bano Zaidi, Abdul wadood1, Qaiser Nawaz, Aneeqa Nawaz, M. Atiq Ur Rehman, Aldo R.Boccaccini, Pakistan
12:20 19-69 Modified Zinc Oxide Nanoparticles for Corrosion Resistance Applications
Ali Dad Chandio, Muhammad Hamza Saleem, Iqra Naeem Hyder, Hasan Raza Khan, Maryam Ali, Pakistan
12:40-14:00 Lunch Break
Session 12 (Lecture Room No 3)
Tuesday, October 22, 2019 Time 14:00-15:40
Chairperson: Kamran Nikbin and M Ramzan A Karim
14:00 19-198 Development of Drones and Robots for Industrial Plant Inspection
Ahmed Shibli, United Kingdom
14:20 19-291 Multifunctional Organic-Inorganic Hybrid Thin Films Naureen Akhtar, Norway
14:40 19-27 Fabrication of Nanophotonic Structures as Broadband Super Absorbers
Abdul Ghafar Wattoo, Tauseef Shahid, Pakistan
15:00 19-81 Effect of Polymer Matrix in Polymer/TrGO Nano-Composite for EMI Shielding Application in Microwave and Infrared Region
Hafiz M Fayzan Shakir, Khadija Zubair, Pakistan
15:20 19-9 Thermal Characterization of Various Reduced Derived Fuel Materials for Energy Applications
Tayyab Qureshi, Muhammad Asif Hussain, Tanveer Iqbal, Ehsan Ul Haq, Asif Nadeem Tabish, Muhammad Hamid Siddiqi, Pakistan
15:40-16:00 Tea Break
Session 13 Tuesday, October 22, 2019 Time 16:00-17:15
Poster Session-I Chairperson: Poster Judges
19-1 Fabrication of Selective Calorimetric Sensor for Hg²+ Using
Oct 18, 2019
Page 7 of 29
Green Synthesized Silver Nanoparticles Shabana Bhagat, Sirajuddin, Huma Ishaque, Pakistan
19-7 Effect of Precursor Graphite on the Thermal Contact Resistance of Thermally Reduced Graphene Oxide/Silicone Composites Developed for Thermal Interface Applications
Muhammad Awais Ali Zubair, Mohsin Ali Raza, Abdur Rehman Shahid, Talha Abid, Pakistan
19-8 Effect of Silica Reinforcement on Properties of Bentonite Based Geoplymers for Construction Applications
Ehsan Ul Haq, Muhammad Nadeem, Furqan Ahmed, Muhammad usama Majeed, Gul Hameed Awan, Muhammad Ramzan Abdul Kareem, Muhammad Asif Hussain, Pakistan
19-12 Effect of Particles Size Variation on the Microstructure, Mechanical and Corrosion Properties of TiNi- Nano Silica Reinforced Composites
Syed Abbas Raza, Muhammad Imran Khan, Mairaj Ahmad, Rashid Ali Sindhu, Danish Tahir, Pakistan
19-14 Effect of Fiber Dimensional Attributes on Mechanical Properties of Natural Fiber Reinforced Composites (NFRC) using FEA
Muhammad Sohail Malik, Shoaib Ijaz, Ramzan Abdul Karim, Pakistan
19-15 Effect of PH and Chloride Concentration on the Corrosion and Pitting Behavior of Al-7075 T6 Tempered Alloy in Sodium Chloride (NaCl) Solution
Syed Abbas Raza, Muhammad Ramzan Abdul Karim, Rashid Ali Sindhu, Pakistan
19-16 Modeling of Reactive Melt Infiltration Used in the Fabrication of Ni-Si/C Composites
Khurram Iqbal, Pakistan
19-18 A Simplistic Approach to Develop CuS/PbS Nanocomposite for Electrocatalytic and Photocatalytic Applications
Mohsin Muhyuddin, Talha Farooq Khan, M. Abdul Basit, Pakistan
19-19 Design Optimization of Leaf Springs Made up of Laminated Composites in Comparison with Steel
Muhammad Sohail Malik, Rohan Ul Haq, Pakistan
19-22 Producing Fe-Based Bulk Metallic Glass Through Powder Metallurgy Route
Syed Zameer Abbas, Ashraf Ali, Fareed Arshad Nazeer, Imad ud Din, Muaz Chaudhry, Pakistan
19-24 Effect of Temperature on Magnetic Properties of NdFeB and SmCo Magnets
Nouman Bashir, Ali Haider, Kaleem Akram, Saleem Akhtar, Pakistan
Oct 18, 2019
Page 8 of 29
19-26 Physical and Mechanical Properties of Graphene Nanoplatelets Reinforced Al6061-T6 Composites Processed by Spark Plasma Sintering
Mahmood Khan, Anwar ul Hassan, Rafi Ud Din, Abdul Wadood, Syed Wilayat Husain, Shahid Akhtar, Ragnhild Elizabeth Aune, Pakistan
19-28 Development and Characterization of Manganese Bismuth Magnetic Alloy
Hifsa Mazhar, Syed Wilayat Husain, Pakistan
19-29 Sliding Wear Behavior of Tribaloy T-400 Sprayed Coatings by High Velocity Oxy-Fuel (HVOF) Process.
Irum Kulsoom, Pakistan
19-30 Synthesis of All Inorganic Stable Pervoskite Material for Solar Cell Application
Saqib, Muhammad Adnan, Sofia Javed, Aftab Akram, Muhammad Usman, Pakistan
19-32 Plant Extract Based Synthesis of Gold Nanoparticles and their Application in Sensor
Pirah Siyal, SirajUddin, Pakistan
19-35 Enhanced Properties of HSLA Steels by Electroless Ni-P-Al2O3 Nanocomposite Coatings
K. Shahzad, Malik Adee Umer, R.A. Shakoor, F. Rathore, A.Raza, Shoaib Butt, Pakistan
19-38 Corrosion Study of Epoxy Ester-Based Zinc Rich Paints for Cold Galvanizing of Mild Steel
Muhammad Faheem Maqsood, Mohsin Ali Raza, Zaeem Ur Rehman, Muhammad Abid, Muhammad Usman Bhatti, Muhammad Awais Ali Zubair, Pakistan
19-50 Magnetization of SmCo Permanent Magnet at Elevated Temperature
Kaleem Akram, Nouman Bashir, Ali Haider, Saleem Akhtar, Pakistan
19-52 Indigenous Development and Testing of Spin Coating Device for Professional Use
Afnan Haider Khan, Muhammad Naveed, Amir Mahmood, M. Kamran Ashraf, M. Younas, Pakistan
19-57 Effect of PVA Treatment of Bamboo Fibres on Mechanical Properties of Bamboo/Epoxy Composites
Danish Tahir, Muhammad Ramzan Abdul Karim, Azhar Hussain, Ehsan Ul Haq, Sohail Malik, Syed Abbas Raza, Mairaj Ahmad, Pakistan
19-59 Electron Beam Welding of Ti-6Al-4V and Weldment Characterization
Muhammad Omer Farooq, Massab Junaid, Fahd Nawaz Khan, Pakistan
Oct 18, 2019
Page 9 of 29
19-61 Personalized Cooling System Using Phase Change Material Kashif Ali, Rizwan Mahmood Gul, Muhammad Ali Kamran,
Salman Noshear Arsahd, Pakistan 19-62 Effect of Ni3Al Coating on Vibration Suppresion of Beams of
Different Thicknesses Shoaib Nadeem, Imran Aziz, Hasan Aftab Saeed, Khalid Mehmood, Pakistan
19-63 Development and Characterization of One-Dimensional TiO2 Nanostructure for Dye Sensitized Solar Cells
Muhammad Omer Farooq, Faheem Iqbal, Pakistan
19-64 Structural, Electrical and Spectroscopic Properties of Yb+3 Substituted β-Ferrites KFe11-XYbxO17
Imran Sadiq, Sajjad Hussain, Pakistan
19-66 Yttrium Doping in Bismuth Vanadate Nanoparticles to Enhance Hydrogen Production by Water Splitting in Photoelectrochemical Cell
Muhammad Imran Rameel, Muhammad Hassan, Pakistan
19-67 Failure/Root Cause Analysis of Boiler Super Heater Tubes Jehanzaib Anwar, Haris ikram, Abdul Qadeer, Hamza Butt, Muhammad Irfan, Pakistan
19-68 Failure Analysis of Agricultural Diesel Engine Crankshafts Hamza Butt, Abdul Qadeer, Haris Ikram, Jehanzaib Anwar,
Muhammad Irfan, Pakistan 19-70 Influence of Annealing Temperature on Mechanical and
Corrosion Behavior of 5083 Al Alloy Qanita Tayyaba, Adnan Qayyum Butt, Hassan Waqas, Muhammad Shahzad,
Ammad H. Qureshi, Pakistan 19-73 Fabrication of Graphene Oxide Assisted Polyamide
Nanocomposite Membranes for Water Disinfection: Probing the Effect of Silane Coupling Agent
Hira Kausar, Altaf Hussain, Saima Shabbir, Pakistan
19-74 Impedance Spectroscopy Study of Ag/CNT/Epoxy Nano-Composite
Fizah Dilshad, Pakistan
19-76 Synthesis and Dielectric Properties of Lanthanum Substituted Beta Ferrites
Imran Sadiq, Samreen Saeed, Pakistan
19-77 Industrial Process for Synthesis of ZnO Powder Using Wet Chemical Precipitation Method
Syed Muhammad Ishaq, Sahid Bhutto, Hassan Khattak, Muhammad Bilal, Sheikh Muhammad Umer, Bilal Hasan, Muhammad Yasir Khan, Muhammad Umar, Ahmed Hassan, Pakistan
Oct 18, 2019
Page 10 of 29
19-79 Influence of Ca Substitution on the Structural, Electrical and Electrical Polarization of Sr Based R-Type Hexagonal Ferrites
Imran Sadiq, Muhammad Junaid Amin, Pakistan
19-80 Study of Effects of Cooling Rate on Microstructural Evolution of FeCrCo Alloy
Salman Waqar, S. Akbar, Ali Haider, Iftikhar us Salam, Saleem Akhtar, Pakistan
19-82 Laser Surface Texturing on an Aerospace Alloy with Sub-Micron Size Ti/TiN Coating
Irfan Nadeem, Anjum Tauqir, Rehan Akhter, Pakistan
19-84 Investigation of Structural, Electric Polarization and FTIR Properties for Lanthanum Substituted β-Ferrites.
Imran Sadiq, Muhammad Shahbaz Qureshi, Pakistan
19-87 Sythesis of Al Doped ZnO Thinfilms and Modification of their Electrical Properties
Muhammad Adnan, Aftab Akram, Pakistan
19-89 Effect of Carbon on the Mechanical Properties of Rapidly Solidified Alloys
Sardar Farhat Abbas, Ju Young Cho, Bum Sung Kim, Taek Soo Kim, South Korea
19-92 Role of Rare Earth Elements in Magnetic Phase Transition of R-Type Hexagonal Ferrites
Imran Sadiq, Mishal Idrees, Pakistan
19-95 Three Dimensional Microstructural Investigation of Silicon Carbide Composite Materials
Fareeha Hameed, L. Mancini, H. Tatlisu, S. Tosti, A. Moriani, Pakistan
19-97 Synthesis of Transparent Heaters Using Silver Nano Wires. Arbaaz Ali, Muhammad Yousuf Hassan, Arsalan Siddique, Pakistan
19-98 Parametric and Failure Analysis of Silicon Cell on Photovoltaic Modules Under Hail Load
Hafiz Basit Ali, Arsalan Ahmad, Rizwan M.Gul, Pakistan
19-99 Effect of Nickel Addition on the Morphology and Electrochemical Behaviour of Zn-Ni Alloy Coating
Ameeq Farooq, Hamna Sajjad, Sohaib Ahmad, Kaab Bin Tayyab, Kashif Mairaj Deen, Pakistan
19-100 Influence of Cold Rolling on the Electrochemical Behavior of 316L (X2CrNiMo 17-13-2) Stainless Steel
Kaab Bin Tayyab, Ameeq Farooq, Abdul Basit Nadeem, Taqi Zahid Butt, Pakistan
Oct 18, 2019
Page 11 of 29
19-102 A Smart, High Performance Frequency Selective Metamaterial Absorber for S-Band
Hassaan Anasri, Muhammad Adeel Aleem, Danish Malik, Mustehsin Ali, Sidra Hussain, Sara Qaisar, Pakistan
19-103 Improved Drying Efficiency of an Indigenously Developed Solar Food Dehydrator with Advanced Features
Afnan Haider Khan, Muftooh Ur Rehman Siddiqi, Riaz Muhammad, Saqib Muhammad, Ihtisham ul Haq, Pakistan
19-104 Effect of Magnetomechanical Coating Thickness in Beam Structures
Shoaib Nadeem, Imran Aziz, Hasan Aftab Saeed, Pakistan
19-106 Characterization of NiCrMo Dental Restoration Alloy Ali Haider, Omar Farooq Azam, Muhammad Talha, Saleem Akhtar, Pakistan
19-111 Cancer Theranostics with Magnetic and Janus Nanoparticles M. Zubair Iqbal, China
19-113 Structural, Morphological, Mechanical and Optical Modifications in PMMA Thin Films Induced by Laser Produced X-Rays
Saman, Muhammad Shahid Rafique, pakistan
19-117 Temperature and Electric Field Dependent Phase Transformations in [001] PMN-PT Single Crystal
Ghulam Shabbir, Khurram Shahzad, Ammad Hussain Qureshi, Pakistan
19-118 NdFeB Magnets with Superior Magnetic Properties Asif Ali, Shahid Imran, Hamza Afzal, Aamir Nusair Khan, Saleem Akhtar,
Pakistan 19-120 Microstructure, Magnetic Properties and Thermal Stabilities of
Isotropic Alnico Ribbons Prepared by Melt Spinning Method Sajjad Ur Rehman, Zhenchen Zhong, Qingzheng Jiang, China
19-131 Solar Light Responsive Bismuth Doped Titania with Enhanced Ti3+for Efficient Photocatalytic Degradation of Flumequine: a Mechanistic Role of Peroxymonosulphate
Ikhtiar Gul, Murtaza Sayed, Pakistan
19-133 Grain Size Refinement of Ni Containing Age-Hardenable High Alloy Steel
Muhammad Haroon Qaiser, Imran Nazir, Ahnaf Usman, Amjad Ali, Hamid Zaigham, Pakistan
19-135 Nitrogen Doped Carbon Quantum Dots and GO Modified WO3 Nanosheets Combination as an Effective Visible Photo Catalyst
Shamaila Sajjad, Pakistan
Oct 18, 2019
Page 12 of 29
19-138 Tailoring the Electrical and Optical Characteristics of GaAs Thin Film by 2 MeV Ni Ions Irradiation
Waqar Adil Syed, Pakistan
19-141 Study of Modified Graphene Polyamide-6 Composites as Coating Material
Usman Ali, Pakistan
19-142 Comparative Study of Structural and Transport Properties in RE-Substituted Cobalt Ferrites Nanoparticles
Muhammad Kamran, Pakistan
19-143 Deposition and Characterizations of Germanium Thin Films on Silicon Based Substrate
Eisha Butt, Pakistan
19-144 Structural Analysis of Al-CNT Nanocomposite Using X-Ray Diffraction
Muhammad Mansoor, Liaqat Ali, Pakistan
19-145 Soldering to Gold Thin Films Using Indium Rich Silver Eutectic Alloys
Muhammad Mansoor, Liaqat Ali, Pakistan
19-146 Microstructural Evaluation of Cold Rolled Austenitic Steel using X-Ray Diffraction
Muhammad Mansoor, Pakistan
19-147 Impact Strength Amelioration of AISI 1020 Steel using Thermal Treatments
Muhammad Mansoor, Liaqat Ali, Pakistan
19-148 Effect of High Temperature Exposure on Microstructure of Inconel 718
Nouman Zubair, Pakistan
17:15-17:25 Ice Cream Break
Session 14 (Lecture Room No 1)
Wednesday, October 23, 2019 Time 09:00-10:40
Chairperson: Lin Liu and Ali Dad Chandio
09:00 19- N5 KN- Titanium and Titanium alloys: An Overview Abdul Wadood, Pakistan
09:40 19-123 Predicting the Multiaxial Response of Ti-Aluminide Alloy at Elevated Temperatures
Kamran Nikbin, United Kingdom
Oct 18, 2019
Page 13 of 29
10:00 19-109 Microstructure, Property and Processing Relationship of Ni Base Superalloy
Syed Shehzad Raza, Tahir Ahmad, Muhammad Kamran, Muhammad Umar Manzoor, Aqil Inam, Pakistan
10:20 19-6 Synthesis of Metal Oxide based Nano Formulations of Leukotriene and COX-2 Inhibitors and its Application for Inflammation Therapy
Syeda Sohaila Naz, Sulaiman, Shabir Ahmad, Sara Qaisar, Pakistan
10:40-11:00 Tea Break
Session 15 (Lecture Room No 1)
Wednesday, October 23, 2019 Time 11:00-12:40
Chairperson: Kamran Nikbin and Naureen Akhtar
11:00 19-101 KN Amorphous Alloys and Amorphous Coatings: Processing and Applications
Lin Liu, China
11:40 19-200 KN Electrophoretic Deposition of Gentamicin Loaded Chitosan/Gelatin/Bioactive Glass Composite Coatings on PEEK/Bioactive Glass Layers: A Comprehensive Study on in Vitro Bioactivity and Antibacterial Effect
Muhammad Attiq Ur Rehman, Aldo R. Boccaccini, Pakistan
12:20 19-140 A System of Alternation TiO2 and MgF2 Multilayer Antireflection Coatings for Optoelectronic Devices
Waqar Adil Syed, Pakistan
12:40-14:00 Lunch Break
Session 16 Wednesday, October 23, 2019 Time 14:00-15:40
Poster Competition: Surface Modification & Smart Coatings (For Judges & Presenters: Evaluation of Posters During 11:00-12:40)
Chairperson: Poster Judges
SMSC-01 (2019-72)
Development of Zinc Dust Pigmented Surface Tolerant Epoxy Coating on Salted Contaminated Steel Surfaces
Nouman Akram, Amir Nadeem, Muhammad Danial, Ameeq Farooq, Abdus Salam, Pakistan
SMSC-02 (2019-252)
Microsecond Laser Texturing of an Aerospace Grade Aluminum Alloy to Synthesize Hydrophobic coating
Aneeqa Naeem, Esham Butt, Hamza Khawaja, Irfan Nadeem, Rehan Akhter,
Oct 18, 2019
Page 14 of 29
Anjum Tauqir, Pakistan
SMSC-03 (2019-172)
Electrophoretic Deposition of HA on Mg-Zn-Zr Alloy and Its In-Vitro Degradation Behavior in Ringer's Solution
Qanita Tayyaba, Pakistan
SMSC-04 (2019-137)
Mo Alloying and Laser Surface Melting of St-12 Hardfacings Doubles the Sliding Wear Resistance
Shaikh Asad Ali Dilawary, Pakistan
SMSC-05 (2019-96)
Surface Modification of AZ31B Magnesium Alloy by Microarc Oxidation Method
Saleem , A. Farooq, K. B. Tayyab, A. Salam
SMSC-06 (2019-173)
Laser Cladding to Improve Behavior of Air-Plasma Sprayed Ni-20Cr Coating on Stainless Substrate
M. Rauf, S. Bano, R. Qayyume, M. Shahid, K. Mehmood SMSC-07 (2019-259)
Effect of Plasma Nitriding on Properties of Chromated AA2024 Alloy
Haziq Hanif, Aneela Wakeel, Riffat Asim Pasha, Pakistan
SMSC-08 (2019-166)
Rapid Solidification and Laser Surface Alloying to Generate Thin Metastable Surfaces
Shazeen Akhtar, Pakistan
SMSC-09 (2019-243)
Influence of Addition of Boron Carbide Nano-Particles Through Friction Stir Processing on Wear Properties of Aluminum Alloy AA-7075
Shaher Bano, Pakistan
SMSC-10 (2019-271)
Effect of Titanium Interlayers on Corrosion and Wear Behavior of TiN PVD Coated Stainless Steel
Awais Awan, Riffat Asim Pasha, Rizwan Ahmed Malik, Pakistan
SMSC-11 (2019-134)
Evaluation of Titanium Nitride Modified Bondcoat System Used in Thermal Barrier Coating in Corrosive Salts Environment at High Temperature
Muhammad Haroon Qaiser, Imran Nazir, M. Shahid, Amir Nusair Khan, Amjad Ali, Hamid Zaigham, Pakistan
SMSC-12 (2019-139)
Structural and Photocatalytic Properties of SnO2 Nanorods Decorated Graphene Nanocomposites
Tahira Qamar Nisar, Tahira, Pakistan
SMSC-13 (2019-150)
Effect of Deposition Time and Heat Treatment on Structural and Mechanical Properties of Ni3Al Coating Deposited by Air Plasma Spraying on Tool Steel
Sabah Zaman, Khalid Mehmood, Pakistan
Oct 18, 2019
Page 15 of 29
SMSC-14 (2019-156)
Effect of Cr2O3Coating on AC and DC Magnetic Properties of Maghamite Nanoparticles
Naman Ahmed, Naman, Aqib Javed, Faisal Zeb, Muhammad Kamran, Kashif Nadeem, Heinz Krenn, Pakistan
SMSC-15 (2019-151)
Structural and Optical Properties of Ni Doped La2O3 Nanosheets
Sadaf Siddique, Pakistan
SMSC-16 (2019-287)
In-Vitro Study of Commercially Pure Titanium After Ultrasonic Surface Mechanical Attrition Treatment (SMAT)
M. K. Yaseen, Pakistan
SMSC-17 (2019-292)
Development of Durable Superhydrophobic Composite Coating for Wood Materials
Syeda Maryam Shah, Tayyab Subhani, Usama Zulfiqar, Pakistan
SMSC-18 (2019-163)
Minimized Surface Energy of ZrO2Coated MnFe2O4 Nanoparticles
Faisal Zeb, Muhammad Ishaque, Kashif Nadeem, Muhammad Kamran, Heinz Krenn, Dorothée Vinga Szaboo, Ulrich Brossmann, I. Letofsky-Papst, Pakistan
SMSC-19 (2019-212)
Mitigating Sulfate Vanadate Hot Corrosion of Yttria Stabilized Zirconia (YSZ) Coatings
Noveed Ejaz, Muhammad Mansoor Malik, Liaqat Ali, Pakistan
SMSC-20 (2019-217)
Oxidation Resistant Aluminide Coating on a Columbium Alloy
Noveed Ejaz, Muhammad Mansoor Malik, Kamran Yasin, Hamid Zaigham, Muhammad Nouman malik, Muhammad Khalid, Muhammad Asad, Khalid Mehmod, Pakistan
SMSC-21 (2019-220)
Wear Behavior of Ni3Al Coatings at High Temperature Deposited by Air Plasma Spraying System
Khalid Mehmood, Pakistan
SMSC-22 (2019-224)
Failure Analysis of a Nitrided Steel Block
Khalid Mehmood, Pakistan
SMSC-23 (2019-225)
Comparison of Structural and Magnetic Properties of Uncoated and Crystalline TiO2 Coated CoFe2O4 Nanoparticles
Muhammad Zareef Khan, Kashif Nadeem, Pakistan
SMSC-24 (2019-228)
Prediction of Localized Fatigue Behavior of Functionally Graded Nanocrystalline Top Layer Produced by Ultrasonic Surface Mechanical Attrition on Pure Titanium
Muhammad Mansoor, Noveed Ejaz, Hamid Zaigham, Pakistan
SMSC-25 (2019-250)
Development of Hard Coating and Laser Surface Texturing on Light Aerospace Grade Alloy to Deposit Solid Lubricant for
Oct 18, 2019
Page 16 of 29
Application in Space
Irfan Nadeem, Rehan Akhter, Aamer Nusair Khan, Anjum Tauqir, Pakistan
SMSC-26 (2019-256)
Fabrication and Characterization of Flexible BNT Film by Electrophoretic Deposition Technique
Muhammad Asif Rafiq, Adnan Maqbool, Imran Hussain Khan, Gul Hameed Awan, Abbas Saeed Hakeem, Pakistan
SMSC-27 (2019-268)
Hot Corrosion of Yttria-Stabilized Zirconia Coating, in a Mixture of Sodium Sulfate and Vanadium Oxide at 950 oC
Qadeer Ahmed, Pakistan
SMSC-28 (2019-269)
Development of Surface Hybrid Composites by Friction Stir Processing to Improve the Tribological Properties of Aluminum Alloy 6061-T6
Talha Ahmed, Zaheer Mushtaq, Wali Muhammad, Hamid Zaigham, Pakistan
SMSC-29 (2019-211)
Facile Fabrication of Hydrophobic/Oleophilic Tri-Junctions of Silica with Activated Carbon and Graphene Oxide for Rapid Oil Spill Cleanup
Attika Malik, Shamaila Sajjad, Pakistan
SMSC-30 (2019-226)
Binary Hetero-Structure of Al2O3 with SnO2 A Potential Photo Catalyst
Maria Masood, Shamaila Sajjad, Pakistan
SMSC-31 (2019-157)
Unusual Magnetic Splitting in M-H Loops of SiO2 Coated NiO Nanoparticles
Hur Abbas, Kashif Nadeem, Heinz Krenn, Pakistan
SMSC-32 (2019-222)
Effect of Hard Chrome Layer on the Tribological Behaviour of the Pressurized Steel Tubes
Khalid Mehmood, Pakistan
SMSC-33 (2019-216)
Failure of a Thrust Augmenter Flap due to Coating Degradation
Noveed Ejaz, Muhammad Mansoor Malik, Muhammad Nouman malik, Kamran Yasin, Hamid Zaigham, Pakistan
15:40-16:00 Tea Break
Session 17 (Lecture Room No 2)
Wednesday, October 23, 2019 Time 11:00-12:40
Chairperson: Zulfiqar A Khan and Shahid Bhutto
11:00 19-43 KN Characterization of Drug-Delivery Related Materials by Transmission Electron Microscopy
Dalaver H. Anjum, Saudi Arabia
Oct 18, 2019
Page 17 of 29
11:40 19-42 Effect of Nano Dispersant Additions to the Electrodes for Aluminum Electrolysis
Shahid Akhtar, Norway
12:00 19-23 Rapid Solidification and Laser Surfaces Alloying to Generate Thin Metastable Surfaces
Shazeen Akhtar, Anjum Tauqir, Pakistan
12:20 19-2 Experimental Investigation of Fracture Toughness of Ti 6Al 2Sn 4Zr 6Mo using Micro Vickers and Nano Indentation Technique
Muhammad Irfan Khan, Pakistan
12:40-14:00 Lunch Break
Session 18 (Lecture Room No 3)
Wednesday, October 23, 2019 Time 11:00-12:40
Chairperson: Taek Soo Kim and Muneeb Asim
11:00 19-N1 KN
Basit Yameen, LUMS, Pakistan.
11:40 19-121 Temperature-Deformation Relations in Reversibility of Shape Memory Alloys
Osman Adiguzel, Turkey
12:00 19-242 Mechanical Properties of Aged-TiNiPdCu High Temperature Shape Memory Alloys
Saif ur Rehman, Mushtaq Khan, Aamer Nusair Khan, Syed Imran Husain Jaffery, Liaqat Ali, Mohammad Khurram, Pakistan
12:20 19- Flexible piezoelectric nano-generator based on ZnO structure for energy harvesting
Adnan Maqbool, Pakistan
12:40-14:00 Lunch Break
Session 19 (Lecture Room No 1)
Thursday, October 24, 2019 Time 09:00-10:40
Chairperson: D. H. Anjum and Yasir Nawab
09:00 19-3 KN Unsolved Issues in Various TiNi Based High Temperature Shape Memory Alloys
M. Imran Khan, Pakistan
09:40 19-108 KN Residual Stress Study of Nickel Aluminide Coatings Deposited Onto Super alloys
Oct 18, 2019
Page 18 of 29
Ali Dad Chandio, Pakistan
10:20 19-46 Impedance Spectroscopy Study of Ag/CNT/Epoxy Nanocomposite
Fizah Dilshad, Fizah Khan, Qaribullah, M. Adeel Aleem, M. Asjad, M. Saleem Mirza, Sara Qaiser, Pakistan
10:40-11:00 Tea Break
Session 20 (Lecture Room No 1) Thursday, October 24, 2019 Time 11:00-12:40
Popular Talks
Chairperson: Tahir I. Khan and Walayat Hussain
11:00 PT-01 Bio Materials, Tissue Engineering and Regenerative Medicines: The World and Us
Aqif Anwar Chaudry, Pakistan
11:50 PT-02 Prospective of Lithium Ion Batteries
Ghulam Murtiza, Pakistan
12:40-14:00 Lunch Break
Session 21 (Lecture Room No 1)
Thursday, October 24, 2019 Time 14:00-15:40
Chairperson: Ahmed Shibli and Shahid Akhtar
14:00 19-41 KN Characterization of Organic Solar-Cell Nano-Materials by Using Advanced Techniques of Transmission Electron Microscopy
Dalaver H. Anjum, Saudi Arabia
14:40 19-154 High Temperature Oxidation Studies of Low Carbon Alloy Steel Ijaz Ahmad, W.Q Khan, Syed Arslan Azhar, Ahmad Iqba, Pakistan
15:00 19- Development of 3D Titanium Structures Kamran Nikbin, United Kingdom
15:20 19-13 Characterization of the Aniline DBSA/ Thermoplastic Polyurethane Blends for the Thermo-Mechanical and Electro-Mechanical Properties
Iqra Abdul Rashid, Pakistan
15:40-16:00 Tea Break
Session 22 (Lecture Room No 2)
Oct 18, 2019
Page 19 of 29
Thursday, October 24, 2019 Time 14:00-15:40
Chairperson: Muhammad Shahid and Shaheed Khan
14:00 19-49 In-situ Condition Monitoring Techniques Applied in Surface Engineering
Zulfiqar A Khan, United Kingdom
14:20 19-90 Effect of Carbon on the Mechanical Properties of Rapidly Solidified Alloys
Taek Soo Kim, Sardar Farhat Abbas, South Korea
14:40 19-129 Design Development and Characterization of Super Hydrophobic Surface Coating on Wood Materials
Shahid Hussain Abro, Sameen Fatima, Sidra Abad, Iqra Ashraf, Tooba Rahim, Pakistan
15:00 19-203 Synthesis and Electrochemical Characterization of Non-Precious Metals Electro-Catalysts for Proton Exchange Membrane Fuel Cell (PEMFC) Application.
Afaf Ali, Shahbaz Ahmad, Saim Saher, Pakistan
15:20 19-181 A Smart, High Performance Frequency Selective Metamaterial Absorber for S-Band
Danish Malik, Pakistan
15:40-16:00 Tea Break
Session 23 (Lecture Room No 3)
Thursday, October 24, 2019 Time 14:00-15:40
Chairperson: Kim Bum Sung and Saif ur Rehman
14:00 19-152 Additively Manufactured 316L Stainless Steel as an Efficient Electrocatalyst
Waseem Haider, USA
14:20 19-10 Effect of Particles Size Variation on the Microstructure, Mechanical and Corrosion Properties of TiNi- Nano Silica Reinforced Composites
Mairaj Ahmad, Muhammad Imran Khan, Syed Abbas Raza, Rashid Ali Sindhu, Danish Tahir, Pakistan
14:40 19-83 Preparation and Characterization of Nano Crystalline Cellulose form Phragmites Karka
Syed Burhanuddin Abdali, Pakistan
15:00 19-158 Micro-Emulsion Based Templated Synthesis of Manganese Oxide Nano Rod Catalyst for Oxidation of Toluene: Experimental and Computational Approach
Oct 18, 2019
Page 20 of 29
Ataf Ali Altaf, Pakistan
15:20 19-199 Catalytic Degradation of Chloramphenicol by Bismuth Doped Nano Zerovalent Iron
Aamir Khan, Pakistan
15:40-16:00 Tea Break
Session 24 Thursday, October 24, 2019 Time 16:00-17:15
Poster Session-II Chairperson: Poster Judges
19-153 Spatial Investigation of Electronic Properties in Composite Electrolytes for Solid Oxide Fuel Cells Using Embedded Probes
Atif Khan Niaz, Hyung-Tae Lim, South Korea
19-155 Microstructure and Magnetic Properties of High Performance Dy Free NdFeB-Alnico Nano Crystalline Magnetic Alloys
Sajjad Ur Rehman, Qingzheng, Zhenchen Zhong, China
19-159 High Electro-catalytic Activity and Low Charge Transfer Resistance of Cobalt-Nickle/Polypyrole (Co0.1Ni0.1/Ppy) Nanocomposites Based Counter Electrodes Used for Dye Sensitized Solar Cells
Naeem Ahmad, Adnan Gulab, Abdul Wahab, Nasima Arshad, Pakistan
19-160 Synthesis of Naproxen Nano formulations and their Biomedical Applications
Sulaiman, Pakistan
19-161 Thermal Study of High Temperature Elastomer Blends Muhammad Sarfraz Nawaz, Pakistan
19-162 Synthesis and Characterization of Titania Nanotubes by Anodizing Titanium in Fluoride Containing Electrolytes as Effected by PH and Anodic Potential
Akhlaq Ahmad, Ehsan Ul Haq, Furqan Ahmed, Muhammad Arshad, Muhammad Nadeem, Muhammad Awais Altaf, Pakistan
19-165 Novel Graphene-Titania Interfaces as a Potential Catalytic Material Towards Clean Energy Production
Naila Jabeen, Naila, Pakistan
19-167 Development and Characterization of Sustainable Construction Material (Geopolymer Concrete)
Saira Niaz, Pakistan
Oct 18, 2019
Page 21 of 29
19-169 Electrical Analysis of Bismuth Based Cobaltites with Samarium Contents Under Influence of Temperature
Yasir Abbas, Muhammad Anis-ur-Rehman, Pakistan
19-170 Minimization of Energy Losses by Doping Cerium in Hexaferrites.
Rizwan Khalid, M. Anis-ur-Rehman, Pakistan
19-171 Structural and Electrical Response of Composite Li-Cobaltite Nanoparticles
Sammar Tayyab, Muhammad Anis-ur-Rehman, Pakistan
19-174 Bottom-Up Or Top-Down? an Approach to Gas Pipeline Integrity Management System.
Muhammad Hussain, Tieling Zhang, Richard Dwight, Australia
19-175 Microwave Absorption Properties of Barium-Strontium Hexaferrites Prepared by WOWS Sol-Gel Method
Uzma Afsar, Nahall Niazi, Faiza Arif, M. Anis-ur-Rehman, Pakistan
19-177 Conduction Properties in RE Doped Nano-Tellurides for Energy Applications
Faiza Arif, Nahall Niazi, Uzma Afsar, M. Anis-ur-Rehman, Pakistan
19-178 Strontium Hexaferrites Prepared by Co-Precipitation Method: the Role of Dopant on Structural and Electrical Properties
Nahall Niazi, Faiza Arif, Uzma Afsar, M. Anis-ur-Rehman, Pakistan
19-179 Non Precious Metal Catalysts: A Fuel Cell and ORR study of Thermally Synthesized Nickel and Platinum mixed Nickel nanotubes for PEMFC
Shahbaz Ahmad, Pakistan
19-180 Study of Electrical Properties of Bismuth Telluride Selenide Muhammad Tahir, Muhammad Anis-ur-Rehman, Pakistan
19-182 Correlation of Structural and Electrical Properties of Ceria Based Oxides Rohi Zahra, Muhammad Anis ur Rehman, Pakistan
19-184 Mechanical Properties of Friction Stir Welded AA 2014-T6 with Different Travel Speeds
Talha Ahmed, Hamid Zaigham, Mustasim Billah Bhatty, Ahnaf Usman, Pakistan
19-185 Enhanced Mechanical Properties of AA-6061 Joints Using B4C Nano-Reinforcement by Friction Stir Welding
Umama Javed, Faisal Mustafa, Muhammad Umar Farooq, Syed Wilayat Husain, Pakistan
19-186 Comparison of Mechanical Properties of Friction Stir Welded
Oct 18, 2019
Page 22 of 29
AA 6061 Thick Plates in Different Heat Treatment Conditions Talha Ahmed, Hamid Zaigham, Mustasim Billah Bhatty, Ahnaf Usman,
Pakistan 19-188 An Innovative Technique to Estimate Thickness of Hard
Submicron Size Coatings on Soft Substrate Irfan Nadeem, Aamer Nusair Khan, Anjum Tauqir, Pakistan
19-190 A New Electrode and Spectroelectrochemical Method to Study Highly Oxidized Iron Species in Metalloenzyme
Afsar Khan, Abdul Naeem, Denis A. Proshlyakov, Grant LeVasseur, Pakistan
19-192 Investigation of Effect of Heat Treatment and Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded Butt Joint of AA 6061
Shaher Bano, Hamza Afzal, Talha Ahmed, Muhammad Umar Farooq, Hamid Zaigham, Pakistan
19-193 Influence of Addition of Boron Carbide Nano-Particles Through Friction Stir Processing on Mechanical Properties of Aluminum Alloy AA-7075
Shaher Bano, Muhammad Umar Farooq, Rehan Qayyume, Mudassar Rauf, Talha Ahmed, Hamid Zaigham, Pakistan
19-194 Replacement of MgO Powder with Alumina Ceramic Beads for Development of Immersion Heater for Oil Refineries
Anjum Shahzad, Pakistan
19-195 Comparative Study of Frequency Dependent Transport Properties in Cobaltite Nanoparticles Synthesized by Wet Chemical Methods
Tanveer Akhtar, Muhammad Anis-ur-Rehman, Pakistan
19-197 Corrosion Protection of ASTM A516 Through Surface Passivation
Muhammad Ali Khan, Aqueel Shah, Syed Husain Imran, Mushtaq Khan, Pakistan
19-201 Effects of Coolant Media on Machining of Titanium Alloy Muhmaad Ali, Syed Husain Imran, Mushtaq Khan, Shahid Ikramullah Butt,
Aamir Jalil, Pakistan 19-205 Self-Assemble Synthesis of Silver Nanoparticles by Base
Hydrolyzed Extracts of Bioactive Phenolic Compounds from Wheat Flour
Aqsa, Ayaz Ali Memon, Shahabuddin Memon, Pakistan
19-206 Optimization of Super Plastic Forming Parameters of AA5083 for Aerospace and Automotive Applications
Tayyaba Zaman, Rehan Qayyume, Chaoli Maa, Pakistan
Oct 18, 2019
Page 23 of 29
19-207 Flexible Body Armor Utilizing Shear Thickening Fluids Based on Nanosized Silica Particles
Syed Khalid Mehmood Shah, Pakistan
19-209 Microwave Assisted Synthesis of Porous NiCo2O4 Microspheres: Application as High Performance Asymmetric and Symmetric Supercapacitors with Large Areal Capacitance
Syed Khalid Mehmood Shah, Pakistan
19-213 A Chimie Douce Route to Synthesize CPH-Neodymium Oxide Powder
Noveed Ejaz, Liaqat Ali, Gul Hameed, Furqan Ahmed, Muhammad Mansoor, Pakistan
19-214 Graphene Oxide Reinforced Natural/Synthetic Based Nanofluid for Enhanced Oil Recovery Application
Sadia Sagar Iqbal, Asad Mehmood, Pakistan
19-215 Quantitative Analysis of Modifications in Ultra High Molecular Weight Polyethylene Caused by e-Beam Irradiations Using Polarized Light Spectroscopy
Manzoor Ahmad, Malik Sajjad Mehmood, Pakistan
19-218 Influence of Temperature on Structural and Electrical Properties of Cr-Zn Substituted M-Type Strontium Hexaferrite Nanomaterials.
Sana, M. Anis-ur-Rehman, Pakistan
19-223 Metallurgical Investigation of Thick-Walled Cylinder Khalid Mehmood, Pakistan
19-227 Synthesis of Graphene-Tin Oxide Nanostructured Thin Films as Effective Electron Transport Layer
Amjid khan, Pakistan
19-229 Low Temperature Fused Slurry Silicide Coating of R512E Powders Over Nb Alloy C-103
Shaikh Asad Ali Dilawary, Pakistan
19-230 Effect of Flakes Morphology on Tribological Characteristics of Grey Cast Iron
Muhammad Kamran Yaseen, Muhammad Mansoor, Noveed Ejaz, Pakistan
19-231 Blended Polymer Composites: Ablation, Thermal and Mechanical Aspects
Sadia Sagar Iqbal, Arshad Bashir, Ali Bahadar, farzana siddique, Waheed Gull, Pakistan
19-232 Generation of Micro Porosity Within PVDF Laminate Membranes for the Study of Permeation Flux of Various
Oct 18, 2019
Page 24 of 29
Solvents Generation of Micro Porosity Within PVDF Laminate Membranes for the Study of Permeation
Sadia Sagar Iqbal, Arshad Bashir, Ali Bahadar, farzana siddique, Waheed Gull, Pakistan
19-233 Role of Heat Treatment in Synthesis of Nanostructured Multiferroic BiFeO3 Perovskite
Saboohi Aftab, Waqar Mehmood, M.S.Awan, Pakistan
19-234 Cobalt Doped Iron Sulfide Nanostructures Ayesha Jamal, Waqar Mahmood, Sadia Khalid, Pakistan
19-235 Mechanical and Magnetic Properties of Zinc Oxide Nanoparticales Induced in Polymer Reinforced Composites
Atia Zafar, Hadia Noor, Saira Riaz, Shahzad Naseem, Pakistan
19-237 Studies of Optical Properties of SiO2-Al2O3 Composites Hadia Noor, Sobia Latif, Saira Riaz, Shahzad Naseem, Sundas Mahmood,
Pakistan 19-238 Development of Highly Sensitive UV Sensor Using Morphology Tuned
ZnO Nanostructures Nazar Abbas Shah, Pakistan
19-241 EFfect of Deep Cryogenic Treatment on Corrosion Behavior of AISI 4340 Steel
Zubia Anwer, Pakistan
19-247 Electrical Properties of 0.36BiScO30.64PbTiO3 Ceramic Doped with Calcium Fluoride
Ghulam Shabbir, Khurram Shahzad, Pakistan
19-248 Effect of Sn Content on Structure and Piezoelectric Properties of Pb(Zr0.35Ti0.65)1-XSnxO3
Haseeb Haroon, Pakistan
19-251 Magnetic and Magnetothermal Properties of Gd5Si4 and Gd5(SixGe1-X)4 Nanoparticles
M Hisham Alnasir, Sadia Manzoor, Pakistan
19-253 Development of Highly Sensitive UV Sensor Using Morphology Tuned ZnO Nanostructures
Murrawat Abbas, Pakistan
19-254 Superior Shuttling of Lithium and Sodium Ions in Manganese Doped Titania at Functionalized Multiwall Carbon Nanotubes Anode
Asim Khan, Pakistan
19-257 Investigation of Structural and Optical Characterization of
Oct 18, 2019
Page 25 of 29
CZTS Thin Films Hadia Noor, Aftab Ahmad, Adnan Ali, Pakistan
19-258 Synthesis and Characterisation of Activated Carbon from Coconut Shell and Its Role in Adsorption of CO2
Syed Zain ul Abedin, Shayan Ahmed, Ali Shamroz Khan, Talha Yasin, Ali Dad Chandio, Pakistan
19-261 Frequency Analysis of Bi-Layered Thick Functionally Graded Cylindrical Shells by using First Order Shear Deformation Theory
Shahid Hussain Arshad, Zohib Akram, Pakistan
19-262 Lithium and Magnesium Co-Doped with Nickel Oxide Thin Film as Charge Transport Layer for Inorganic Perovskite Solar Cell
Abdul Rehman, Pakistan
19-263 Synthesis and Optical Characterization of ZnS Thin Film Deposited by Chemical Bath Deposition Technique
Hafiz Muhammad Shammas Mushtaq, Pakistan
19-265
Electrical and Magnetic Properties of Gd Doped Ba0.75Sr0.25Fe12-xGdxO19 Nanoparticles
Zain Nawazisch, Anis-ur-Rehman, A. ul Haq, Pakistan
19-266 Impact of Gd Doping on the Dielectric and Magnetic Properties of Sr0.5Ba0.5Fe12O19 Nanoparticles
Arsalan Liaquat, Anis-urrehman, A. ul Haq, Pakistan
19-267 Synthesis and Characterization of Graphene Sheets from Graphite Through Electrochemical Exfoliation and Microwave Reduction
Arshad Hussaun Wazir, Arshad Hussain, Arshad Hussain Wazir, Pakistan
19-272 Estimation of the Annealing Effect on Structural, Optical and Electrical Properties of NiO Thin Films Prepared Using Low Cost Sol-Gel Process
Muhammad Zain ul Abdin Khan, Muhammad Yasir Khan, Shaharyar Hashmi, Sarim Ahmed Khan, Salman Khan, Rahat Ali, Abdullah Bin Amir Sultani, Pakistan
19-273 Synthesis of Graphene Oxide Nanostructures and Its Application in Drinking Water Purification
Mohsin Ali Lashari, Muhammad Yasir Khan, Omer Saeed, Syed Muhammad Ovais, Nasir Hussain, Mirza Adeel Baig, Bilal Ajmal, Pakistan
19-274 Novel Hybrid Method to Modify the Surface Features of Cobalt Doped Zinc Oxide Nanostructures Used as Photo-Anode Material in 3rd Generation Solar Cells: Dye Sensitized Solar Cells
Oct 18, 2019
Page 26 of 29
Muhammad bin Ahmed, Pakistan
19-275 Parametric Study of Nd: YAG 500 W Pulsed Laser Cutting of 5 mm CFRP Sheet in Single Pass and Multipasses by Using Full Factorial Technique.
Shahid Mehmood, Pakistan
19-276 Mechanical and Microstructural Behavior of 42CRMO4 Low Alloy Steel After Different Hot Forging Reduction Ratios and Thermomechnical Treatment
Sultan Mehmood, Aneela wakeel, Pakistan
19-278 Gas Tungsten Arc Welding of High Strength Steel: Residual Stress Analysis and Hydrogen Embrittlement Investigations
Shahroz Sakhawat, Pakistan
19-279 Micro Plasma Arc Welding of Thin Austenitic Stainless Steel Sheets: Process Optimization, Weldments Characterization and Distortion Investigations
Shahroz Sakhawat, Sagheer Ahmed, Haris Naseem, Pakistan
19-280 Development of Welding Procedure for High Strength Quenched and Tempered Steel and Weldments Characterization
Umer Hayyat, Shahroz Sakhawat, Abul Rahman, Pakistan
19-281 Effect of Graphene on Mechanical Properties of Sandwich Panel for Aerospace Structures
Zainab Naseer, Zaffar M Khan, Pakistan
19-282 In-Situ Synthesis of 3D Ultra-Small Gold Augmented Graphene Hybrid for Highly Sensitive Electrochemical Binding Capability
Ayesha Taj, Ayesha Shaheen, Jie Xu, Pedro Estrela, Adnan Mujahid, Tayyaba Asim,M. Zubair Iqbal, Waheed S. Khan, Sadia Z. Bajwa, Pakistan
19-283 Programable Photo-Active Janus Dendrimersomes and Glycodendrimersomes as a Platform for the Encapsulation of Biologically Synthesized Silver Nanoparticles and Study of Protein-Glycan Interactions
Bilal Javed, Pakistan
19-284 Pd-Doped Zinc Oxide Nanostructures for Liquefied Petroleum Gas Detection at Low Temperature
Musarrat Jabeen, Azhar Iqbal, R Vasant Kumar, Mansoor Ahmed, Pakistan
19-285 Surface Modification of Sputtered Carbon Supercapacitor Electrode by Hydrogen Annealing
Muhammad Uzair Iqbal, Azhar Hussain, Ramzan Abdul Karim, Noor Zaman, Muhammad Shahid, Pakistan
19-290 Hard Anodization and Hybrid PEO Coatings on AZ-Series
Oct 18, 2019
Page 27 of 29
Magnesium Alloys Zeeshan Ur Rehman, Dongjin Choi, South Korea
19-293 Comparative Study of Fracture Toughness of Weld Zone and Heat Affected Zone of Friction Stir Welded AA 6061
M. Umar, Hamza Afzal, Talha Ahmed, Hamid Zaigham, Pakistan
17:15-17:35 Ice Cream Break
Session 25 (Lecture Room No 1)
Friday, October 25, 2019 Time 09:00-10:40
Chairperson: Naureen Akhtar and A. Cheikhrouhou
09:00 19-40 KN Aluminum (Al) Metal of Future Challenges and Applications: Light Weight is the Key
Shahid Akhtar, Norway
09:40 19-86 A Comparative Study of Microstructure, Mechanical Properties, Residual Stresses and Electrochemical Corrosion Behavior in TIG and Electron Beam Welding of Ti-5Al-2.5Sn Titanium Alloy
Asim Iltaf, Muhammad Tahir, Syed Abbas Raza, Massab Junaid, Fahd Nawaz Khan, Pakistan
10:00 19-60 Decipher Ultrasonic Signals from Defects in Thick Aluminum Extrusions to Identify Type and Origin of Defects
Lubaba Batool, Zukhruf Nawaz, Irsa Jahangir, Anjum Tauqir, Zeeshan Ahmad Abbasi, Pakistan
10:20 19-26 Physical and Mechanical Properties of Graphene Nanoplatelets Reinforced Al6061-T6 Composites Processed by Spark Plasma Sintering
Mahmood Khan, Pakistan
10:40-11:00 Tea Break
Oct 18, 2019
Page 28 of 29
Session 26 (Lecture Room No 1)
Friday, October 25, 2019 Time 11:00-12:40
Chairperson: Shahid Akhtar and F. A. Khalid
11:00 19-51 KN "Invisible" Nanostructuring Provides Self-Cleaning in Optical Windows
Naureen Akhtar, Bodil Holst, Norway
11:40 19- Development of portable atomic force microscope for in-situ damage detection
Ahmed Shibli, UK 12:00 19-93 Fabrication of SF/HAp/Ce-Doped ZnO Nanoparticles Composite
Scaffolds a Potential Candidate for Orbital Floor Reconstruction Sehrish Sarfaraz, Pakistan
12:20 19-260 Phase Evolution, Microstructural Analysis and High Temperature Sintering Study of Magnesium Titanate Nanocrystals Derived from Hydrothermal Process Using Suspension Titania Precursor
Sumaira Naz, Shahid Khan Durrani, Mazhar Mehmood, Hassan Waqas, Ammad Hussain Qureshi, Pakistan
12:40-14:00 Lunch Break
Session 27 (Lecture Room No 2)
Friday, October 25, 2019 Time 11:00-12:40
Chairperson: Taek Soo Kim and Muhammad Shoaib
11:00 19-17 KN Ammonium Ion Detection in Solution Using Vertically Grown ZnO Nanorod Based Field-Effect Transistor
Muhammad Yasir Khan, Pakistan
11:40 19-240 Evaluation of Potential of Uncoated Mesoporous Silica Capsules for Drug Delivery Applications
Tayyab Ali Khan, Syed Mujtaba ul Hassan, Jamil Ahmad, H. Waqas, Ahmad Khurshid, Mazhar Mehmood, Pakistan
12:00 19-39 EMI Shielding Properties of Polymer Blends with Inclusion of Graphene Nano-Platelets
Hafiz M Fayzan Shakir, Asra Tariq, Iqra Abdul Rashid, Ayesha Afzal, Pakistan
12:20 19-255 Effect of Heat Treatment on Microstructure and Mechanical Properties of Medium Carbon Low-Alloy Steel
Syed Bilal Hasan Rizvi, Ali Dad Chandio, Syed Muhammad Shabbir Madad, Muhammad Aftab Qureshi, Zulfiqar Ali, Pakistan
Oct 18, 2019
Page 29 of 29
12:40-14:00 Lunch Break
Session 28 (Lecture Room No 3)
Friday, October 25, 2019 Time 11:00-12:40
Chairperson: M A Barakat and S Burhanuddin
11:00 19-54 Sliding Friction Behavior of Sintered Ni-Cr Composites with Solid Lubricants
Amir Azam Khan, Wan Farhana Mohamad, Malaysia
11:20 19-44 Hybridization of Alumina and Graphene as an Effective Filler for Enhancement of Thermal Properties of Epoxy Composites
Muhammad Wasim Akhtar, Jong Seok Kim, Muddassir Ali Memon, M. Moazam Baloch, Pakistan
11:40 19-36 Multi-Functional Carbon Fiber Reinforced Composite Ayesha Afzal, Pakistan
12:00 19-94 Enhancement in Flexural Characteristics of Honeycomb Sandwich Structures for Diverse Core Configurations
Sohail Gohar, Muhammad Sohail Malik, Ghulam Hussain, Pakistan
12:20 19-21 Effect of Stearic Acid Modification on Mechanical and Physical Properties of Epoxy Composite Coating
Waseem Shehzad, Danish Tahir, Muhammad Ramzan Abdul Karim, Pakistan
12:40-14:00 Lunch Break
0