-
AMEENJI RUBBER PVT LTD
COMPLETE COMPANY PROFILE
-
INTRODUCTION
� Ameenji Rubber Pvt. Ltd an ISO 9001-2008 certified company takes Pleasure in introducing as leading manufacturer / Authorized supplier of foreign manufacturer of Elastomeric Bearings Pads ,Slab seal joints ,strip seal joints ,Compression seal joints, Pot PTFE bearings and Building joints, Geo synthetics in India .
� The products are manufactured strictly in accordance with relevant IRC codes/ specifications .The Elastomeric Bearings
� The products are manufactured strictly in accordance with relevant IRC codes/ specifications .The Elastomeric Bearings and Pot-PTFE Bearings manufactured by us are approved by Ministry of Road Transport and Highways Govt. of India and have been empanelled by MORTH vide there letter No RW/NH-34057/1/2082 S&R(B)DT22.6.2010and Letter No RW/NH-34054/2/2011-S&R(B) DT21-6-2012 .We are also registered/approved with RDSO under Ministry of Railways for supply of Expansion joints, Bearings and other Products. Delhi Metro Rail corporation & Chennai metro rail limited has also approved our Expansion Joints and Elastomeric Bearings for use on Metro Rail Projects vide their letter No-DMRC/CORP./20/DESIGN/1/99 dt:29-03-2012 & soma/CRO/CMRL/31936.
-
INTRODUCTION
� The present turnover of the company is approx 17 Crores annually and this has been achieved in span of 14 Years since its inception in theYear1999.The factory is located at Hyderabad INDIA We are equipped with “state of the art” advanced Material Testing Laboratory for testing of MATERIALS and finished products to ensure quality as per relevant specifications/IRC CODES. We have the latest plant and machinery for manufacture of these products and dedicated work force of 90Employees which includes Engineers, Technicians, etc
The quality of our products can be judged from list of � The quality of our products can be judged from list of references/orders executed for Important clients which includes l&T,BHEL,Bihar Rajya Pul Nirman Nigam, CCCL,BSCPL,SUZLON, TAT projects, MRF. IVRCL, INDIAN RAILWAYS etc. and we receive continuous appreciations from clients for quality of our products and receive repeat orders. A copy of job references/work executed is enclosed for ready reference.
� We are in the process of introducing new products to meet increased industry demand and meet new challenges .Should you have any Technical or Financial Enquiry, Our dedicated team of Engineers and Professionals will immediately respond to your Technical or any other enquiry from our corporate office.
-
ELASTOMERIC BRIDGE
BEARING PADS
� Neoprene bridge bearing or laminated elastomeric bearing are much easier to install in bridge than compared to other types of bearing used and required nil maintence. unlike most other elastomer, Neoprene rubber under goes no
PRODUCT VIEWUSAGES & ADAVANTAGES.
Neoprene rubber under goes no marked stiffening at low temperature when the thermal Contraction of the bridge deck is at maximum.
� , Elastomeric Bearings manufactured by us permits a smooth and uniform transfer of load from the beam to the substructure and allow beam rotation . They further allow lateral and longitudinal movement of the beam caused by thermal forces. Have no moveable parts and thermal expansion and contraction are absorbed by the Pad's ability to give and take in shear. There is no sliding motion between pad and beam or between pad and abutment.
-
GOVT. APPRUVALS FORBEARING PADS
MORTH APPROVAL RDSO APPROVAL
-
STRIP SEAL EXPANSION JOINTS
� Single Strip seal elastomeric joint (
Movement-up to 80mm) Single strip
expansion joint consist of two edge
beams with anchorages and an
elastomeric sealing element held
PRODUCT VIEWUSAGES & ADAVANTAGES.
elastomeric sealing element held
firmly in the housing of edge beams
that guarantee the water tightness
the joint. The maximum gap
between the edge beams at road
surface when the joint fully opens
due to maximum contraction of
deck shall be limited to 80mm for
comfortable passage of the traffic.
The edge beams protect the
adjacent bridge deck concrete from
damage due to vehicular impact
and also transfer the vehicular load
to the deck structure through
robust anchorage system Typical
single strip seal joint is shown in
the figure below.
-
GOVT. APPRUVALS FOR
STRIP SEAL EXPANSION JOINTS.
MORTH APPROVAL RDSO APPROVAL
-
POT-PTFE BEARINGS
� * Pot bearings are usually recommended when bearing rotations are large, compact designs and long term servicing ability are required.* Pot bearings provides longer
PRODUCT VIEW ADVANTAGES
* Pot bearings provides longer service life compared to elastomeric bearings.* Smaller in size compared to elastomeric bearings.* Longer maintenance time.* Pot bearings can sustain many cycles of very small and large rotations.* Economical repair as replacement of elastomer disc only.* Does not get effected by external atmospheric correction.
-
MORTH APPRUVAL FOR POT PTFE BEARINGS
-
RUBBER SHEETS
� We have sharpened our skills in the manufacture of different types of Rubber Sheets to meet the requirements of our clients. Rubber sheets manufactured by
Product view Product content
requirements of our clients. Rubber sheets manufactured by us have exceptional elongation properties, electrical conductivity and thermal conductivity among other properties. Clients can avail from us excellent quality abrasion resistant rubber sheets that are used in various industries. These rubber sheets are robust and can withstand excessive abrasion, cuts and wear.
-
EPDM RUBBER EXTRUDED PROFILES
We are renowned as one of
the stupendous
manufacturers and
suppliers of
EPDM Rubber Extruded
Profiles in India. We
manufacture the Rubber manufacture the Rubber
Extruded Profiles in
accordance with the
specific requirements of
clients. We have appointed
a meticulous team of
professionals, which is
highly qualified and have
substantial experience of
manufacturing
the Profiles.
-
COW MATS & POULTRY MATS
Cow Rubber Mats Poultry Cage Mats
-
CREDENTIALS
ISO CERTIFICATE NSIC CERTIFICATE
-
CREDENTIALS
CRISIL REPORTBHEL PERFORMANCE
REPORT
-
OUR VALUED CLIENTS
-
FINANCIALS
TURNOVER (IN MILLIONS IND RUPEES)
120
140
160
180
0
20
40
60
80
100
2010-11 2011-12 2012-13 2013-14
-
CONTACT US
CORPORATE OFFICE
AMEENJI RUBBER PVT LTD
5-5-65, F- 14, S.A.TRADE CENTER
RANIGUNJ, SECUNDERABAD
TELENGANA,
PLOT NO 9/18
ROAD NO 8 IDA NACHARAM,
HYDERABAD
TELENGANA INDIA 500
CORPORATE OFFICE FACTORY
TELENGANA,
INDIA 500 003.
PH 91 40 66322144 ; 40044006,
91 40 66325660; 91 40 27718681
TEL FAX ;91 40 27718681
MOBILE ; + 9199490 41029
MAIL ID
WEB SITE;
www.ameenji.net
www.ameenji.com
076.