-
Generated by Jive on 2013-12-24+01:001
SAP HANA and In-Memory Business DataManagement: The SAP Hana Reference forNetWeaver Basis Administrators
Posted by Andy Silvey May 27, 2013.
The SAP Hana Reference for NetWeaver Basis Administrators
The SAP Hana Reference for NetWeaver Basis Administrators was started because during studies forHanaTec Certification it was noticed that anybody interested in Hana Administration was missing a onestop shop location and reference for the Hana Commands and Command Line Tools and Administrator'sSQL queries respective to the Basis Administrator's Hana requirements.
The SAP Hana Reference for NetWeaver Basis Administrators is a live SCN Community project, this meansit is continuously updated and extended to include the latest valuable knowledge on SAP Hana from theBasis Administrator's perspective.
Everybody who has gems of knowledge [anything from tips & tricks to howto's] on SAP Hana from the BasisAdministration perspective is positively welcomed and encouraged to join this open source sharing SCNCommunity collaborative initiative to make this resource the most powerful SAP Hana Basis Administrationresource available.
Let's together exploit the power of the SCN Community and unlock the value of the knowledge and experiencein the community to the benefit of all.
To contribute either add a comment at the bottom or email or private message me.
Looking forward to more community contributions.
All the best,
Andy.
p.s. if you click the View as PDF button on the right, then you can save this as a pdf onto your phone or pc foroffline access and reading - of course this work is live so come back from time to time and get the latestversion.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:002
Contribution History
Date Author Subject
8th June 2013 Martin English Developer Edition Filesystem Structure19th September 2013 Paul Aschmann Forward port 80 to XS Engine (8080)19th September 2013 Paul Aschmann XS Engine debug mode17th December 2013 Jake Echanove Steps To Reset Hana System User Password
Contents:
1) HDB stop & StopSystem HDB
2a) HDB start & StartSystem HDB
2b) Note about SAPCONTROL location on the Hana Developer Edition
3) GetSystemInstanceList
4) hdbnameserver
5) hdbindexserver
6) hdbuserstore
7) Install Permanent License Using SQL
8) M_VOLUME_IO_STATISTICS
Total Memory Used
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:003
Code and Stack Size
Total Memory Consumption of All Columnar Tables
Total Memory Consumption of All Row Tables
Total Memory Consumption of All Columnar Tables by Schema
List All Columnar Tables of Schema 'SYSTEM'
Available Physical Memory
Free Physical Memory
9) Activating Emergency User with hdbnameserver & hdbindexserver
9b) Steps To Reset Hana System User Password
10) Renaming an SAP HANA System with a GUI using hanaconfig.sh
11) Location of Configuration Files
12a) Trace Files Location
12b) How to enable serverwide HANA SQL traces?
12c) How to enable tracing on HANA with hdbodbc_cons Command
13) Testing the ODBC Installation
14a) HANA Database update with SUM or hdbupd
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:004
14b) hdbupd & hdbsetup
15) ODBO Driver
16) Collecting System Information for Support
17) HDBSQL
18) To run sql queries using hdbsql
19) Performing a Database Backup Using SQL Commands
20) Setting Up a Data Backup Using Cron
21) Canceling a Running Data Backup
22) Canceling Other Running Data Backups
23) To check the state of the data backup
24) hdblogdiag & Recovery
25) Restore when log backups are missing
26) hdbbackupdiag
27) hdbcons
28) Sizing Hana Basic Calculations
28a) Sizing SAP BI/BW on Hana
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:005
28b) Sizing the SAP Business Suite on Hana
29) HANA SSO with Kerberos and Active Directory
30) Row Store Reorganisation
31) How to generate a runtime dump on SAP HANA saphostagent/sapdbctrl for Hana
32) DBSL hints for SAP HANA
33) hdbrename
34) hdbnsutil
35) hdbsrvutil - Example Usage
36) Show Hana Processes HDB proc & HDB info
37) Hana System Management SQL Administration Statements Reference
38) Hana SQL Reference Manual
39) SAP Hana SQLScript Reference
40) SAP Hana Technical Operations Manual
41) SAP Hana Administration Guide
42) SAP HANA Administration tables/views
43) The time stamps for the "Start Time" in Data Provisioning of HANA Studio are UTC time
44) How to Check SUSE Linux Distribution Version and Patch Level
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:006
44b) How to View the SAP Hana Edition & Revision
45) Remove the SAP HANA Extended Application Service (SAP HANA scriptserver) from thetopology of your SAP HANA database
46) HANA Alerts related to File System Utilization
47) Log Volume is Full and the Database Doesn't Accept Any New Requests
48) Using the REGI Tool to Deploy Content for Delivery Units for example Translated Texts
49) Homogeneous System Copy on SAP HANA
50) HANA License Key Request and Installation
50&1/2) Hana Architecture - Instances Based On Application Server Java Released For UseWith Hana Database 1.00
51) HANA Architecture - Multiple HANA db's Databases on One Hana Appliance
52) HANA Architecture - HANA MCOD Multiple Applications or Business Suite Scenarios &Components Running on one SAP HANA System
53) HANA Architecture - How To Copy a Multiple-Host SAP HANA Database onto Single HostHANA System
54) HANA Architecture - SAP Business Suite Powered by SAP HANA - Multi-Node (Scale-Out)Support
54b) Hana Architecture - Guidance from IBM and SAP for High-end customer landscapesbased on SAP HANA
54c) Hana Architecture - SAP Hana Landscape Redistribution with SP6
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:007
55) How To Overcome the Hana Hardware Check Or Hardware Not Recognized Errors DuringInstallation
56) SAP Hana and the SLD System Landscape Directory
57) SLD configuration for multiple SAP HANA databases
58) How To Handle Common SAP Hana Alerts
59) Solution Manager Diagnostics Agent Installation On SAP Hana Systems
60) Optimal Settings for Suse Linux SLES 11 SP2 and SLES 11 for SAP SP2
61) Forward Port 80 to XS Engine (8080)
62) XS Engine Debug / Developer Mode
Appendix - Useful OSS Notes and Documentation
SAP Hana Commands and Command Line Tools and SQL Reference Examples for NetWeaver BasisAdministrators
1) Stop Hana
./HDB stop
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:008
/usr/sap/hostctrl/exe/sapcontrol -nr -function StopSystem HDB
2a) Start Hana
./HDB start
/usr/sap/hostctrl/exe/sapcontrol -nr -function StartSystem HDB
2b) Note about SAPCONTROL location on the Hana Developer Edition
[ thanks to Martin English for providing this information ]
On the Developer Editions, sapcontrol lives in the instance EXE folder; i.e.
cdexe
./sapcontrol -nr -function
On the current (revision 56) developer edition,
cdexe takes you to
/usr/sap/HDB/SYS/exe/hdb
which is linked to
/usr/sap/HDB/exe/linuxx86_64/hdb
imdbhdb:~ # su - hdbadm
imdbhdb:/usr/sap/HDB/HDB00> cdexe
imdbhdb:/usr/sap/HDB/SYS/exe/hdb> pwd
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:009
/usr/sap/HDB/SYS/exe/hdb
imdbhdb:/usr/sap/HDB/SYS/exe/hdb> cd ..
imdbhdb:/usr/sap/HDB/SYS/exe> ls -la
total 8 drwxr-x--- 2 hdbadm sapsys 4096 2013-01-25 14:17 .
drwxr-x--- 3 hdbadm sapsys 4096 2013-01-25 14:17 ..
lrwxrwxrwx 1 hdbadm sapsys 25 2013-01-25 14:17 hdb -> ../../exe/linuxx86_64/hdb
imdbhdb:/usr/sap/HDB/SYS/exe>
3) Query the current status of all hosts
/usr/sap/hostctrl/exe/sapcontrol -nr -function GetSystemInstanceList
4) Start the name server:
/usr/sap//HDB/hdbenv.sh
/usr/sap//HDB/exe/hdbnameserver
5) Start an index server in a new console:
/usr/sap//HDB/hdbenv.sh
/usr/sap//HDB/exe/hdbindexserver -console
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0010
6) hdbuserstore
Create a user key in the user store and store the password under this user key:
hdbuserstore SET
For example:
hdbuserstore SET millerj localhost:30115 JohnMiller 2wsx$RF
List all available user keys (passwords are not displayed):
hdbuserstore LIST
For example:
hdbuserstore LIST millerj
The following information is displayed
:KEY: millerjENV: localhost:30115USER: JohnMiller?
Call hdbsql with the user key:
hdbsql -U
For example:
hdbsql -U millerj
hdbuserstore Example of User Creation while solving saphostagent/sapdbctrl for Hana issue
Ref: SAP Note 1625203 - saphostagent/sapdbctrl for newdb
The saphostagent functions for querying the database status and for
starting and stopping the database are now also available for the Hana.
If you want to use the connect without a password, the following
prerequisites must be met:
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0011
a. To query information from the database, you require a database user with
the monitoring role.
You can create a database user with the Hana studio. Connect as the SYSTEM
user and execute the following SQL commands:
CREATE USER SAPDBCTRL PASSWORD xx
GRANT MONITORING TO SAPDBCTRL
Then logon to the Hana studio under the username and execute
the following command:
ALTER USER SAPDBCTRL PASSWORD
b. As the OS user adm, you must provide the user key SAPDBCTRL in
hdbuserstore on the database server. You can check the existence of the
user key with the following command:
hdbuserstore LIST SAPDBCTRL
If the user key does not exist, you can create it as follows:
hdbuserstore SET SAPDBCTRL : SAPDBCTRL
The tool hdbuserstore is installed under the following paths:
/usr/sap/hdbclient
or
/usr/sap//hdbclient
c. To check whether the sapdbctrl queries without passwords work, execute
the following command as OS user :
/usr/sap/hostctrl/exe/saphostctrl -function GetDatabaseStatus -dbname
-dbtype hdb
If sapdbctrl responds with the following error text:
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0012
ERROR: Database user authentication failed: SQLDriverConnect: Connect with
userkey failed! then you must check the connect data in hdbuserstore again.
7) Install Permanent License Using SQL
Execute the following SQL command:
SET SYSTEM LICENSE
You can delete all installed license keys by executing the following SQL command
UNSET SYSTEM LICENSE ALL
To Install the license key
SET SYSTEM LICENSE LicenseFile
More info: the Experience Hana Cookbook
8) The monitoring view M_VOLUME_IO_STATISTICS
[ this Knowledge Base Article contains a fantastic overview including screenshots of the actions inHana Studio and on the command line with SQL for checking all kinds of memory consumption:OSS 1840954 - Alerts related to HANA memory consumption ]
Show the Total Read Size and the the Total Write Size for each Volume since the Servicein question was last started.
The SQL command
ALTER SYSTEM RESET MONITORING VIEW SYS.M_VOLUME_TO_STATISTICS_RESET
initialises the statistics shown by this view
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0013
The monitoring viewM_VOLUME_IO_STATISTICS_RESET
now shows the statistics since the reset time
You can use the M_SERVICE_MEMORY view to explore the amount of SAP HANA
Used Memory as follows:
Total Memory Used
SELECT
round(sum(TOTAL_MEMORY_USED_SIZE/1024/1024)) AS
"Total Used MB" FROM SYS.M_SERVICE_MEMORY;
Code and Stack Size
SELECT round(sum(CODE_SIZE+STACK_SIZE)/1024/1024)
AS "Code+stack MB" FROM SYS.M_SERVICE_MEMORY;
Total Memory Consumption of All Columnar Tables
SELECT round(sum(MEMORY_SIZE_IN_TOTAL)/1024/1024)
AS "Column Tables MB" FROM M_CS_TABLES;
Total Memory Consumption of All Row Tables
SELECT round(sum(USED_FIXED_PART_SIZE +
USED_VARIABLE_PART_SIZE)/1024/1024) AS "Row
Tables MB" FROM M_RS_TABLES;
Total Memory Consumption of All Columnar Tables by Schema
SELECT SCHEMA_NAME AS "Schema",
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0014
round(sum(MEMORY_SIZE_IN_TOTAL) /1024/1024) AS
"MB" FROM M_CS_TABLES GROUP BY SCHEMA_NAME ORDER
BY "MB" DESC;
List All Columnar Tables of Schema 'SYSTEM'
SELECT TABLE_NAME AS "Table",
round(MEMORY_SIZE_IN_TOTAL/1024/1024, 2) as "MB" FROM
M_CS_TABLES WHERE SCHEMA_NAME = 'SYSTEM' ORDER BY "MB"
DESC;
Available Physical Memory
select round((USED_PHYSICAL_MEMORY + FREE_PHYSICAL_MEMORY) /1024/1024/1024, 2)
as "Physical Memory GB" from
PUBLIC.M_HOST_RESOURCE_UTILIZATION;
Execute the Linux command cat /proc/meminfo | grep MemTotal
Free Physical Memory
Execute the SQL query:
select round(FREE_PHYSICAL_MEMORY/1024/1024/1024, 2)
as "Free Physical GB" from
PUBLIC.M_HOST_RESOURCE_UTILIZATION;
Execute the Linux command:
awk 'BEGIN {sum = 0};
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0015
/^(MemFree|Buffers|Cached):/ {sum = sum + $2};
END {print sum}' /proc/meminfo
9) Activating Emergency User with hdbnameserver & hdbindexserver
If the SYSTEM users password is lost, you can use the SAP system user
to reset the password.
To recover an SAP HANA instance where the SYSTEM users password is lost,you need to have adm access to the instance where SAP HANA's masterindex server is running.
Open a command line interface, and log on to the server on which
the instance of the SAP HANA master index server is running.
Shut down the instance.
Start the name server:
/usr/sap//HDB/hdbenv.sh
/usr/sap//HDB/exe/hdbnameserver
Start an index server in a new console:
/usr/sap//HDB/hdbenv.sh
/usr/sap//HDB/exe/hdbindexserver -console
You will see the output of a starting index server.
When the service has started, you have a console to the SAP HANAinstance where you are logged on as a SYSTEM user.
Reset the SYSTEM user's password and store the new password in a
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0016
secure location with the following SQL command:
ALTER USER SYSTEM password
Note: Because you are logged on as a SYSTEM user in this console,
you do not have to change this password after the next logon, regardless \of what your password setting policy.
9b) Steps To Reset Hana System User Password
(thanks this Blog which also contains supporting screenshots by Jake Echanove)
UPDATE: Section 7.3 in the admin guide for SP6 discusses how to do this: http://help.sap.com/hana/SAP_HANA_Administration_Guide_en.pdf
Reset HANA SYSTEM user password
SSH to the HANA system and login as root
SU to the adm user
su anaadm
Identify running HANA services
ps aux | grep anaadm
Stop the HANA server
./HDB stop
Verify services are no longer running
ps aux | grep anaadm
Start the name server service this may not get back to a prompt
hdbnameserver &
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0017
Start index server. Run command even though may not be at a prompt.
hdbindexserver console
Reset password for user SYSTEM
ALTER USER SYSTEM PASSWORD Password1234
Stop hdbindexserver service by hitting Ctrl-C
Kill hdbnameserver service
killall -9 hdbnameserver
Verify all HDB services are stopped
ps aux | grep anaadm
Start HANA
./HDB start
Verify HANA services are running
ps aux | grep anaadm
Update password in HANA studio
And you're done :-)
10) Renaming an SAP HANA System with a GUI using hanaconfig.sh
In GUI mode, you will be prompted to enter the required parameters.Use the following instructions to complete this task.
Note: If you specify the host name, make sure that it is fully qualified, such as
myhost.sap.com (i.e., not just myhost).
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0018
Connect to the system with an X server client to enable GUI system access.Open a root shell and go to the directory where you mounted the SAP HANA DVD,
by entering a command such as the following:
cd /mnt//DATA_UNITS/HANA_IM_LINUX__X86_64
Call the script in GUI mode to perform the rename:
./hanaconfig.sh --gui
Select Rename HANA System
Select Next
Specify the required entries.
Leave the root shell after the rename is complete.
hanaconfig.sh gui can also be used for other tasks including installing and de-installing
SMD Agentshttps://cookbook.experiencesaphana.com/bw/deploying-bw-on-hana/preparation/prepare-hana-hardware/
11) Location of Configuration Files
The configuration files (.ini files) are located by default in the following directories
$DIR_INSTANCE/../SYS/global/hdb
custom/config global.ini
indexserver.ini
nameserver.ini
For host-specific configuration settings
$SAP_RETRIEVAL_PATH
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0019
sapprofile.ini
daemon.ini
12a) Trace Files Location
trace files can be found here:
/usr/sap//HDB//trace
12b) How to enable serverwide HANA SQL traces?
Instead of Client-Side JDBC or ODBC tracing an administrator would like to enable serverwide SQL traces.
1. Open In-Memory Computing Engine (IMCE) Studio
2. Go to the Administration Console -> Diagnosis Files
3. Click the Configure Trace ... icon in the top right corner
4. Select "ALL" for SQL tracing
5. Click Apply and OK
The SQL trace file will be listed along the other trace files in the following format:
sqltrace___000.py
Note: Make sure you are connected to the correct HANA instance :-)ref: 1627480 - How to enable serverwide HANA SQL traces?
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0020
12c) How to enable tracing on HANA with hdbodbc_cons Command
The steps below are for Windows. Adjust them accordingly for UNIX and Linux.
1. Open a command prompt
2. Navigate to the location of the HANA Client (e.g. C:\SAP\hdbclient)
3. Run the following commands
1. hdbodbc_cons config trace filename (e.g. C:\SAP\HANA_ODBC.txt)
2. hdbodbc_cons trace sql on
3. hdbodbc_cons trace api on
4. Confirm the settings took by running hdbodbc_cons show all. You should see something similar to thefollowing:
Configuration:
Trace file name : C:\SAP\HANA_ODBC.txt
Trace flags : A:a
ODBC trace : enabled
Short trace : disabled
Debug trace : disabled
SQL trace : enabled
Time stamp prefix : disabled
Packet trace : disabled
Settings:
Update count : 0
Total size : 256
equivalent to 0 process-specific parts.
Version flag : 0
5. Disable tracing by running hdbodbc_cons trace off
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0021
6. Confirm the settings took by running hdbodbc_cons show all. You should see something similar to thefollowing:
Configuration:
Trace file name : C:\SAP\HANA_ODBC.txt
Trace flags : (none set)Settings:
Update count : 1
Total size : 256
equivalent to 0 process-specific parts.
Version flag : 0
Forced re-read of global configuration with last update.
ref: 1834470 - How to enable tracing on HANA
13) Testing the ODBC Installation
You can test the installation of the ODBC driver and your ability to connect
by using the odbcreg tool, which is part of the ODBC installation.
Start the odbcreg tool by enter a command in the form:
odbcreg -t hdbcodbc (for 64-bit driver)
or
odbcreg32 -t hdbcodbc32 (for 32-bit driver).
If the driver is installed properly, you should get the ODBC login screen.
Note, you can also run the command
odbcreg -g or odbcreg32 -g to get a list of installed drivers.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0022
The SAP HANA driver is called HDBODBC
14a) HANA Database update with SUM or hdbupd
As of HANA SPS5, the SAP HANA Automated Update Guide only mentions
SUM (SUM4HANA) for updating the SAP HANA appliance softwareand related components.
You are not sure if SUM is mandatory and using hdbupd is obsolete by now.
The use of SUM is mandatory and the highly recommended way for updating
the SAP HANA appliance. SUM takes care of:
. Migrating the old SAP HANA file system structure to the newshared layout during the selfupdate process
. Handling the lm_structure content in a consistent way
. Keeping the system consistent via update of all the componentswhich are installed on the HANA box
. Checking the correct component version dependencies. In case ofinconsistencies an error is generated and execution will be stopped
. Integration to Solution Manager, e.g. consuming generated stacks with HANAcontent
Other tools such as the On Site configuration tool rely on this landscape
to be correct in order to work properly.
It is technically possible to use hdbupd but you should consider this option
only in special/extreme situations and after consulting a SAP representative.
ref: 1864196 - HANA Database update with SUM or hdbupd
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0023
A useful tip in this blog:
http://scn.sap.com/community/distinguished-engineers/blog/2013/05/29/which-tool-to-use-for-sap-hana-update-sum-for-hana-or-hdbupd.pdf
So how do you recognize if your SAP HANA instance was installed with hdbinst orUnified Installer?
It is really simple, if the directories /usr/sap//SUM and /usr/sap//lm_structureexist then the Unified Installer was used and you should apply Support Package Stacksand Revisions with SUM for HANA. If you do not have these directories, the recommendationis to bring your instance up-to-date and install SUM for HANA and lm_structure usingSAP Note 1793303. After following this note you can use SUM for HANA to apply revisionsand SP Stacks.
On the same subject another very useful blog:
Man-Ted Chan's Blog: SUM for SAP HANA setup - http://scn.sap.com/people/man-ted.chan/blog/2013/06/17/sum-for-sap-hana-setup.pdf
14b) hdbupd & hdbsetup
Automated update of SAP HANA server components
The SAP Software Update Manager is a separate software component that must
be started on the SAP HANA server. A good practice is to install this component
as a service.
The SAP Software Update Manager does not have a user interface.It is controlled remotely from the SAP HANA studio.
Tip: The Software Update Manager can be configured as a Linux service by
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0024
running the following commands:
export JAVA_HOME=/usr/sap//SUM/jvm/jre/usr/sap//SUM/daemon.sh install
The service can be started using the following command:
/etc/init.d/sum_daemon start
After the release of an SPS of the SAP HANA Appliance Software new revisions of the SAP HANA
database are released.
To update your SAP HANA database to these new revisions, use the commands
hdbupd or hdbsetup which are provided with the SAP HANA database installation.
15) ODBO Driver
Install the SAP HANA ODBO driver on the host where MS EXCEL has been installed and is running.For more information, see SAP HANA Client Installation and Update Guide.
a. Open a command prompt and call the SAP HANA client installation program by entering
the following command:
hdbinst -a client []
b. Follow the instructions displayed by the installation tool.
16) Collecting System Information for Support
There is a Python script that allows you to collect information from your systems
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0025
even when no access to the system via SQL is possible.
This information can be added to the support message.
Location and Usage
The name of the Python script is
fullSystemInfoDump.py
and is part of a server installation. It runs from a command line and is located
in the directory
$DIR_INSTANCE/exe/python_support(Linux).
To execute the script adm rights are required.
To start the script out of its location directory, enter:
python fullSystemInfoDump.py
By default the script creates a zip file with all of the collected support information
to the directory
DIR_TEMP/system_dump where DIR_TEMP
is the content of the variable with the same name in sapprofile.ini.
This output directory is shown as console output when the script is running, but it canbe looked up by entering:
hdbsrvutil -z | grep DIR_TEMP=
To change the default directory, an explicit absolute path can be given to the script,
for example:
python fullSystemInfoDump.py
Usage information can be displayed by entering:
python fullSystemInfoDump.py h
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0026
To collect support information you need an SQL user with rights to select the system tables and
views listed in System Tables/Views.
For security reasons the user name and password for this SQL user cannot be given as commandline parameters to the script.
Instead you are prompted for this information:
ts1adm@luvm252058a:/usr/sap/TS1/HDB01/exe/python_support> python
fullSystemInfoDump.py
User name: SYSTEMPassword:
The password is not displayed on the command line.
If the system can be reached via SQL and the user name and password information is valid, the script
starts collecting support information.
If user name and/or password are invalid, the script aborts.
17) HDBSQL
SAP HANA HDBSQL is a command line tool for entering and executing SQL statements, executing
database procedures, and querying information about SAP HANA databases.
You can use HDBSQL interactively or import commands from a file and execute them in thebackground. You can access databases on your local computer and on remote computers.
To get a list of all available hdbsql commands, you should use:
hdbsql -h
Examples:
One step logon to the database on the PARMA computer with instance ID 01 as database
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0027
user MONA with the password RED.
hdbsql -n PARMA -i 1 -u MONA p RED
To log on using a , enter the following command:
hdbsql [] -U
Two-Step Logon, Procedure
Start HDBSQL:
hdbsql []
Log on to the database:
\c [] -n -i -u ,
You display general information about the database:
\s
host : wdfd00245293a:30015
database : ORG
user : SYSTEM
kernel version: 1.50.00.000000
SQLDBC version: libSQLDBCHDB 1.50.00 Build 0000000-0120
autocommit : ON
18) To run sql queries using hdbsql:
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0028
# Hdbsql n : -u p
Port= 315 (## is the instance number)
For example for system number 01:
# Hdbsql n coe-he-40:30115 u system p SAPTeched1
Welcome to the SAP In-Memory Computing interactive terminal.
Type: \h for help with commands
\q to quit
hdbsql=> select count (*) from EIM360.mara
COUNT(*)
14927
19) Performing a Database Backup Using SQL Commands
https://cookbook.experiencesaphana.com/bw/operating-bw-on-hana/data-safety/backup/performing-database-backup/
You can enter SQL commands either by using the SQL editor in SAP HANA studio,or by using the hdbsql program on the command line.
The hdbsql program is located in
/usr/sap//HDB/exe/
Note Backups using SQL commands are only recommended for batch mode(see section Using Batch Mode below).
The backup can be started with the following SQL command:
BACKUP DATA USING FILE ()
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0029
The backup creates the backup files in the default directory.The name of each backup file starts with .
If you want to change the default a location, specify the fullpath, for example:
BACKUP DATA USING FILE (/backupDir/data/monday/COMPLETE_DATA_BACKUP)
Performing a Database Backup Using Batch ModeCurrently, the main tool for batch mode backup is the command
line interface hdbsql.
This is the current recommended mode for executing backups from
operating system level.
hdbsql enables you to trigger backups via crontab.
20) Setting Up a Data Backup Using Cron
a. Install the client software.The client software enables access to the hdbuserstore.Use the following command:
hdbinst a client (default location: /usr/sap/hdbclient)
b. Create a user key.Use the following command:
/usr/sap/hdbclient/hdbuserstore set :315 Example: /usr/sap/hdbclient/hdbuserstore setBACKUP vebwtests1:30015 user password
c. In crontab, call the following at the desired time:
/usr/sap/hdbclient/hdbsql U "BACKUP DATA USING FILE ('')"
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0030
Example: /usr/sap/hdbclient/hdbsql -U BACKUP "BACKUP DATA USING FILE ('MONDAY')"
A data backup is then created in the default location. In the above example,
the prefix of all service-related backup files is MONDAY.
21) Canceling a Running Data Backup
You can cancel a data backup that is still running.To cancel a running data backup, you can use either SAP HANA studio or an SQL command.
Prerequisites
A user needs the system privileges CATALOG READ and BACKUP ADMIN.Canceling a Running Data Backup Using SAP HANA StudioYou can use SAP HANA studio to cancel running data backups that youstarted using the backup wizard. To cancel a running data backup, choose Cancel.The backup is then canceled and you are notified of this.
22) Canceling Other Running Data Backups
To cancel any data backup:
a. Find the Backup ID.
When a data backup is started, the system assigns a unique ID to the data backup.
To find the backup ID of the running data backup, use the monitoring view
M_BACKUP_CATALOG,
which provides an overview of information about backup and recovery activities.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0031
To find the backup ID of the running data backup, use the following SQL command:
select BACKUP_ID from "SYS"."M_BACKUP_CATALOG" where entry_type_name =
'complete data backup' and state_name = 'running' order by sys_start_time desc;
You can now use the backup ID to cancel the running data backup.
Cancel the data backup.
To cancel the running data backup use the following SQL command:
backup cancel
Check that the data backup was canceled.
23) To check the state of the data backup, use the following command:
select state_name from "SYS"."M_BACKUP_CATALOG" where backup_id =
24) hdblogdiag & Recovery
Recover the database until a point in time with a timestamp using a dedicated directory for
data backups and further directories containing automatically written log backups.
Use the following command:
RECOVER DATABASE UNTIL TIMESTAMP '2011-08-22 15:00:00' CHANGE ALL DATA USING PATH
('/backup/MONDAY/') CHANGE ALL LOG USING PATH ('/backup/logs1/','/backup/logs2/')
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0032
25) Restore when log backups are missing
ref: SAP Note 1816483 - Restore when log backups are missing
A restore fails with the error "Recovery could not be completed Cannot
open file ...".
One or more log backups of the SAP HANA database are missing or damaged.
All the available log backups exist in the file system of the database server.
If not all the required log backups are available, an SAP HANA database
restore is subject to restrictions.
In most cases, you will only be able to restore the SAP HANA database to a
in time that lies before the time when the oldest missing log backup was written.
A restore to any point in time (including redo of the log area) is possibleonly if the content of the missing log backup still exists in the log area.
To determine if this is the case, proceed as follows:
Determine the volume IDs and the lowest log item of the missing log backup
from the name of the backup. If a previous restore has failed with the
error message specified above, you can determine the name of the missing
log backup from the error message.
The log backups are named after the schema log_backup__0__, for example,
log_backup_2_0_12345_67890.
In this example, the volume ID would be 2 and the lowest log item 12345.
Use hdblogdiag to determine the lowest log item that still exists in the
log segments of the log area as follows:
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0033
Call
hdblogdiag seglist
This call issues a list of log segments that looks as follows:
LogSegment[0/0:-(...
LogSegment[0/1:-(......
Take into account that the system outputs the log items in hexadecimal
format and that you have to convert them into decimal numbers.
Example:
Assuming the parameter basepath_logvolumes has the value /hana/log/HAN and
the parameter use_mountpoints has the value yes, so that the log segments
lie in the subdirectory mnt0001.
The log segments for the volume with the volume ID 2 then lie there in the
subdirectory
hdb00002: > hdblogdiag seglist /hana/log/HAN/mnt0001/hdb0002
LogSegment[0/0:0x129540-0x131c00(... LogSegment[0/1:0x131c00-0x139540(...
Log segment 0 has the lowest log item 1217856 (hexadecimal 0x129540), logsegment 1 has the lowest log item 1252352 (hexadecimal 0x131c00). Thismeans that the lowest log item that exists in the log segments is 1217856.
If the lowest log item of the missing log backup is bigger than the lowest
log item that still exists in a log segment of the log area, a restore to
the latest available point in time is possible.
In such a case, proceed as follows:
Generate a new backup catalog withhdbbbackupdiag -generate (SAP Note1812057)
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0034
Start the restore for the point in time that you selected.
If a restore to the latest available point in time is not possible, you can
restore the SAP HANA database to an earlier point in time.
You can restore the SAP HANA database only with the log backups that were
written before the missing log backup.
You cannot use the log backups that were written after the missing log
backup.
In this situation, proceed as follows:
Generate a new backup catalog with
hdbbbackupdiag -generate (SAP Note 1812057).
Start the restore for the point in time that you selected. For this, you
must select "Initialize Log Area".
26) hdbbackupdiag
The program hdbbackupdiag provides support for determining the data backup
files and log backup files that are required to restore an SAP HANA
database, with "Recover the database to its most recent state" as the aim.Depending on the availability of the file BackupCatalog.xml that is saved
under the path $DIR_INSTANCE/../SYS/global/hdb/metadata and that is used todetermine the restoration strategy, two application scenarios arise; they
are both described in the following section.
Scenario a: BackupCatalog.xml is available
If the current version of the file BackupCatalog.xml exists, the program
hdbbackupdiag
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0035
determines the most suitable data backup and creates a list
of the required log backup files.
To do this, you must call the program with the option -c .Use the option -c to specify the name of the BackupCatalog
file.
In normal cases, this is BackupCatalog.xml.
If the program is not started from the directory in which the file
BackupCatalog.xml
is located, you can use the option -d to adjust the access path.
The following example illustrates the function:
hdbbackupdiag -d $DIR_INSTANCE/../SYS/global/hdb/metadata -c
BackupCatalog.xml
Output:
Data backup file: thursday_databackup_0_1RedoLogPosition: 0Backup time: 2012-04-12T17:30:03+02:00
Using hdbbackupdiag to Reconstruct the Backup Catalog
A recovery of SAP HANA database fails. The file "backup.log" contains the
error messages:
"recovery strategy could not be determined" and
"Catalog backup not found".
The backup catalog that the database created is not available or defective.All data backups and log backups that are required for the recovery are
available in the file system of the database server.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0036
You can use the program "hdbbackupdiag" to create a new backup catalog.
For this, you provide all the data backups and log backups in the file
system of the database server. If you cannot use the standard paths for
data backups and log backups due to space restrictions, you can also save
the files in different directories. Note that all files of the data backup
must be saved to one directory. However, log backups can be distributed
across multiple directories.
To do this, start the program hdbbackupdiag with the following options:
--generate
--dataDir
--logDirs
-d
All directories must be specified as absolute paths.
For a standard installation, the call is as follows, for example:
hdbbackupdiag --generate --dataDir $DIR_INSTANCE/backup/data --logDirs $DIR_INSTANCE/backup/log -d $DIR_INSTANCE/backup/log
If you have distributed the log backup across multiple directories, you can
specify them behind the option --logDirs separated by commas. For example:
hdbbackupdiag --generate --dataDir $DIR_INSTANCE/backup/data --logDirs $DIR_INSTANCE/backup/log,/mnt/disc2/log -d $DIR_INSTANCE/backup/log
When you call "hdbbackupdiag", the content of the specified directories is
analyzed and a new backup catalog is generated. This backup catalog is
created with a directory for the log back up that is specified with -d.
Then new backup catalog has the file name "log_backup_0_0_0_0.n" whereby n is
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0037
the newly generated backup ID of the database.
To be able to verify the content of the backup catalog, you can output the
recovery strategy that is based on the latest data backup in the generated
backup catalog. For this, use the command
"hdbbackupdiag -d "
After you generate the backup catalog, a recovery of the database may
carried out.
In case the backup catalog is not created in the standard directory
$DIR_INSTANCE/backup/log, you must specify the directory in which thebackup catalog is located in the Recovery Wizard in the step "Locate Log
Backups".
For more information check OSS Note:SAP Note 1812057 - Reconstruction of the backup catalog with hdbbackupdiag
27) hdbcons
http://scn.sap.com/community/hana-in-memory/blog/2012/12/28/how-to-use-sap-hana-hdbcons-utility
hdbcons is a tool to provide information about the actual used memory, the peak memory,the throughput of the different allocators, etc.
SAP Note 1786918 - Required information to investigate high memory consumptionYou are running SAP HANA and you experience high memory consumption / out
of memory situations.
You are asked to provide information using hdbcons.
SAP HANA Development Support requires information about a suspected memory
issue.
Connect to your HANA database server as user sidadm.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0038
a. You suspect that a query requires too much memory:Before running the query start the tracing:
hdbcons 'mm flag / -rs as'
Run the query.
Stop the tracing:
hdbcons 'mm flag / -rd as'
Write output:
hdbcons 'mm callgraph -r -o /'
Please be aware that this trace will slow down the system!
You suspect a memory leak:
Please provide the output files of the following commands:
a. hdbcons 'mm bl -rt Pool' > //
This will show us how much memory is located by which code line.
b. hdbcons 'mm l -s -S -p' > //
This will show which allocator allocates how much memory at the
moment and its peak memory allocation.
The memory consumption stays at a high level / the database seems to
hang because of high memory consumption
Please provide a runtime dump as described in SAP Note 1813020 and
the content of the monitoring view M_HEAP_MEMORY.
hdbcons To get threads list
hdbcons "context list -s" > thread_callstack_test.txt
To generate runtime dump (see the Note 1813020 - How to generate a runtime dump on SAP HANA)
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0039
hdbcons "runtimedump dump -f /test/rte_dump.txt"
28) Sizing Hana Basic Calculations
SAP BW Sizing On Hana Summary
RAM = (Source data footprint - 60gb) * 2 / 4 * c1 + 90gb
or
RAM = ( colstore tables footprint * 2 / 4 + rowstore tables footprint /1.5) * c1 + 50gb
Disk persistence = 4 * RAM
Disk Log = 1 * RAM
c = source database specific compression factor (where applicable)Memory Sizing: Runtime Objects
RAM dynamic + RAM static
Total RAM is
RAM = (Source data footprint - 60gb) * 2 / 4 * c1 + 90gb
or
RAM = ( colstore tables footprint * 2 / 4 + rowstore tables footprint /1.5) * c1 + 50gb
c = source database specific compression factor (where applicable)
Disk Sizing
Disk persistence = 4 * RAM
Disk Log = 1 * RAM
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0040
Useful OSS Notes:
OSS 1736976 - Sizing Report for BW on HANA
OSS 1514966 - SAP HANA 1.0: Sizing SAP In-Memory Database
SAP BW on HANA Sizing Report - https://websmp209.sap-ag.de/~sapidb/012006153200000051552013E/SAP_BW_on_HANA_Sizing_Report_V1_4.pdf
OSS 1799449 - Sizing report ERP on SAP HANA database
OSS 1855041 - Sizing Recommendation for Master Node in BW-on-HANA
28a) Sizing SAP BI/BW on Hana
You intend to migrate an SAP NetWeaver BW system from any database platform
to the SAP HANA In-Memory Database and need information on hardware sizing
of the HANA platform.
Starting with version 7.30 SP5 you can run SAP Business Information
Warehouse (SAP BW) on SAP HANA as database platform. This enables you toleverage the In-Memory capabilities of HANA and the SAP-HANA-optimized BW
objects.
To simplify sizing of an SAP BW system that is supposed to be migrated, SAP now provide
the database independent ABAP report
/SDF/HANA_BW_SIZING
which computes all information relevant to sizing a HANA database server. A first version of
the report is available with ST-PI 2008_1_7xx SP06.
Important: If you plan to migrate a BW system with significant size (e.g.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0041
20+TB source system database size), please read SAP note 1855041.
For a detailed description of the report, its input parameters, and how to
interpret its output, please refer to the document:"SAP_BW_on_HANA_Sizing_Report.pdf" attached to OSS Note 1736976 - Sizing Report for BW on HANA.
The ABAP report now includes the following features:
- enhanced sizing precision by table type specific compression
factors- "non-active data" concept: optimized memory consumption by
taking into account that specific tables are preferred for
memory displacement (e.g. tables belonging to objects inCorporate Memory).- Sizing of a Part of the scenarios can be done specificating a
subset of BW Objects which have to be considered for sizing.Dependent BW Objects will be automatically taken into account.ref: SAP Note 1736976 - Sizing Report for BW on HANA and the pdf attached to the Note
28b) Sizing the SAP Business Suite on Hana
Initial Sizing observations for Suite on HANA (SAP enhancement package 6 for SAP ERP 6.0,version for SAP HANA, SAP enhancement package 2 for SAP CRM 7.0, version for SAP HANA,SAP enhancement package 2 for SAP SCM 7.0, version for SAP HANA, SAP enhancementpackage 3 for SAP Supplier Relationship Management 7.0, version for SAP HANA)
Initial sizing observations are based on lab measurements, load tests and measurements performedin customer test systems. This information may change, if additional measurement results areavailable. This information is only valid, if the system usage is not changed after the move; intenseadditional reporting and OLAP processing is not taken into account.
Application Server
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0042
Based on the measurements SAP doesn't expect any changes concerning CPU, memory and networkrequirements for the ABAP application server. This means that the existing hardware and networkinfrastructure can still be used. Please check the PAM (www.service.sap.com/pam) for further details.
HANA Main Memory
As far as sizing of the HANA appliance is concerned, main memory is the most important resource.The current recommendation from SAP is that you should take half of the size of an uncompressedbut "well-maintained" disk-based database and include a safety buffer of 20%. This means, if the databaseis currently approximately 1,8 TB in size (tables plus indexes), SAP recommends a HANA appliance of 1 TB.You should not forget to consider your future data growth into your planning. SAP doesn't expect changes inmemory requirements for applications using liveCache.
HANA CPU and Disk Space
The appliance is configured in such a way that the CPU power and the I/O capacity is sufficient. To fullysupport the parallel processing capabilities of HANA for optimal response times for analytical applicationsSAP prefers a factor of 3 to 4 more CPU power for HANA than for disk based databases without parallelizationof single statements. This also provides a buffer for running OLTP and OLAP load simultaneously.
If other software is running on the database server, please be careful to identify the CPU consumption ofthe database. You can for example look at the CPU consumption of the database process(es) using SAP'smonitoring tools. Regarding the disk space of Suite on HANA, SAP recommends to use half of the requireddisk space that is needed for the Business Suite for disk-based databases. Please note that this does notmean that each table just needs half of the disk space as compared to a disk based database.
For initial sizings you should use the Quick Sizer (www.service.sap.com/quicksizer) results for database size(DB Disk) and CPU requirements (DB SAPS) as input for HANA main memory, disk space and CPU sizing.
ref: Note 1793345 - Sizing for Suite on HANA
29) HANA SSO with Kerberos and Active Directory
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0043
Update - 18th Dec 2013:
The OSS Note
1837331 - HOWTO HANA DB SSO Kerberos/ Active Directory
contains a fantastic pdf document containing a step by step procedure for setting up Kerberos with Hana
The configuration is a complex task with various sources of error.
Main reasons are the cross OS nature of the setup (Linux/ Windows), often resultingin problems with case (Windows: case insensitive, Linux: case sensitive) and the tightintegration into the network configuration (/etc/hosts, DNS).
In particular, there are various sources of error when creating the keytab and exporting itfrom Active Directory.
The process is highly manual and consists of several steps across different operatingsystems and hosts.
A python script is provided in SAP Note 1813724 which automates the creation of the
keytab.
In addition, the IP configuration at the HANA appliance is validated (hostname resolution/ reverse lookup) and the Kerberos configuration is checked for consistency with the remoteActive Directory.
Unzip the attached hdbkrbconf.zip and run as adm
$ python hdbkrbconf.py -h
for help.
There are two main options, "-k" for creating the keytab and "-v" for validating theconfiguration including the keytab.
Option "-V" will provide verbose output, together with an analysis file for SAP support.
This file will also be written in the event of an error.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0044
More info, check: SAP Note 1813724 - HANA SSO/Kerberos: create keytab and validate conf
30) Row Store Reorganisation
Row store memory size is a lot bigger than the actual data size in row store and showshigh fragmentation ratio.
Row store grows by allocating a 64MB memory segment and shrinks by freeing emptysegments.
A segment is internally divided into fixed-size pages. When a row store table requires morememory to store records, the table takes a free page from existing segments. If no segmenthas a free page, a new segment is allocated.
Deleting a large number of records may result in a number of sparse segments. In such a case,row store reorganization can be performed for memory compaction. The pages in sparsesegments are moved to other segments and the resultant empty segments are freed.
If the prerequisites are not satisfied, row store reorganization should not be executed.
The prerequisites, queries, and monitoring views used for the queries are applicable to Rev 50 andto change in future releases.
o HANA Database Rev 50 or later
- HANA Database has to be upgraded prior to run row store
reorganization
o Catalog integrity check
- The following procedure call should run successfully and
returns empty result set.
CALL CHECK_CATALOG
('CHECK_OBJECT_REFERENTIAL_INTEGRITY','','','');
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0045
o Row store reorganization is recommended, when allocated row store
size is over 10GB and free page ratio is over 30%.
SELECT HOST, PORT, CASE WHEN (((SUM(FREE_SIZE) /SUM(ALLOCATED_SIZE)) > 0.30) AND SUM(ALLOCATED_SIZE) >TO_DECIMAL(10)*1024*1024*1024) THEN 'TRUE' ELSE 'FALSE' END"Row store Reorganization Recommended", TO_DECIMAL(SUM(FREE_SIZE)*100 / SUM(ALLOCATED_SIZE), 10,2) "Free SpaceRatio in %",TO_DECIMAL( SUM(ALLOCATED_SIZE)/1048576, 10, 2)"Allocated Size in MB",TO_DECIMAL( SUM(FREE_SIZE)/1048576, 10,2) "Free Size in MB" FROM M_SHARED_MEMORY WHERE ( CATEGORY ='TABLE' OR CATEGORY = 'CATALOG' ) AND PORT LIKE '%03' GROUP BYHOST, PORT;
If the result of "Reorganization Recommended" is "TRUE", then row
store memory can be reclaimed after row store reorganization.
o Estimation on maximum possible memory space that can be reclaimed:
SELECT SUM(NUM_FREE_DATA_PAGES)*16/1024 "Estimated MaximumMemory Saving in MB" FROM SYS.M_DEV_MEMORY_SEGMENT WHERE
SEGMENT_TYPE = 0;
o Check disk space where log files are located.
SELECT (SUM(NUM_FREE_DATA_PAGES)*16/1024)*1.5 "Estimated LogVolume Size in MB" FROM SYS.M_DEV_MEMORY_SEGMENT WHERE
SEGMENT_TYPE = 0;
Row store reorganization procedure
1. Make a complete database backup
2. Upgrade database to Rev50 or later
3. Make sure to start up database at least once during upgrade.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0046
4. Shutdown HANA database.
5. Set up configuration parameter in indexserver.ini via HANA Studio.
[row_engine] page_compaction_enable = true
6. Restart the database. Startup will take longer than normal startup
when row store reorganization runs.
7. Check the memory fragmentation status after reorganization:
SELECT HOST, PORT, CASE WHEN (((SUM(FREE_SIZE) / SUM(ALLOCATED_SIZE)) > 0.30) AND SUM(ALLOCATED_SIZE) > TO_DECIMAL(10)*1024*1024*1024) THEN 'TRUE' ELSE 'FALSE' END "Row store Reorganization Recommended", TO_DECIMAL( SUM(FREE_SIZE)*100 / SUM(ALLOCATED_SIZE), 10,2) "Free Space Ratio",TO_DECIMAL( SUM(ALLOCATED_SIZE)/1048576, 10, 2) "Allocated Size in MB",TO_DECIMAL( SUM(FREE_SIZE)/1048576, 10, 2) "Free Size in MB" FROM M_SHARED_MEMORY WHERE ( CATEGORY = 'TABLE' OR CATEGORY = 'CATALOG' ) AND PORT LIKE '%03' GROUP BY HOST, PORT;
8. Check Indexserver trace
Please check the indexserver trace files after row store
reorganization is done.
Row store reorganization is performed in 11 phases when successful.
It prints out "[RSReorg] start" message at the beginning,
"[RSReorg] success" message followed by "Reorganization statistics" at the end. When there are errors during reorganization, row store
reorganization is stopped in that phase and all the changes are
rolled back and database starts up to return to its original state
Ref: SAP Note 1813245 - SAP HANA DB: Row store reorganization before reorganization is run.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0047
31) How to generate a runtime dump on SAP HANA saphostagent/sapdbctrl for Hana
SAP Support asks you to generate a runtime dump during a high CPU/Memory consumption
a) Log into the linux HANA host as sidadm user;
b) Run command 'hdbcons';
c) On the hdbcons console run command below:
> runtimedump dump
This will create a file under traces directory called 'indexserver....rtedump.trc'.
d) Attach generated trace file to the OSS Message
Or alternatively
hdbcons "runtimedump dump -f /test/rte_dump.txt"
More info check SAP OSS Note: 1813020
32) DBSL hints for SAP HANA
The following DBSL hints are available for SAP HANA.
o dbsl_equi_join
You can use this hint for a FOR_ALL_ENTRIES in order to inform the
DBSL that an EQUI join can be created from this FAE statement; thisEQUI join can then be resolved for an IN data set.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0048
You must then specify this hint together with the hint of the DBI interface
(&prefer_join 1&) in the statement (see Note 48230).
ABAP
SELECT * INTO FROM FOR ALL ENTRIES IN itab
WHERE a = itab-a AND b = itab-b AND c = itab-c AND d = itab-d
%_HINTS HDB '&prefer_join 1&' hdb 'dbsl_equi_join'
From this, the system generates the following statement for the
database.
SQL for the database
select * from where (a, b, c, d) IN( (?, ?, ?, ?), ... (?, ?, ?, ?) )
o dbsl_add_stmt
Use: dbsl_add_stmt
This hint provides you with the option of adding an additional SQL
enhancement to the SQL statement in the DBSL. This hint is resolved
in the DBSL and the system appends the following text to the end of
the statement that was generated (after the keyworddbsl_add_stmt).
ABAP
SELECT node FROM CONNECTION ('HANA') INTO TABLE T_NODE%_HINTS HDB 'dbsl_add_stmt WITH PARAMETERS (''expression'' =''LEAVES("Node1")'' )'
SQL for the database
select node from table
with parameters ( 'expression' = 'leaves("Node1")' )
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0049
This hint is available in the following releases:
720 DBSL as of patch level 103
720-EXT DBSL as of patch level 103
803 DBSL
NoteIn Release 7.20, you cannot use the keyword %_HINTS HDB to define the
hints for SAP HANA; instead, you must use the keyword %_HINTS ADABAS.The database interfinterface ensures that this hint is also generated for an SAP
HANA Connection.
Ref: Useful OSS SAP Note 1622681 - DBSL Hints for Hana
33) hdbrename
http://help.sap.com/businessobject/product_guides/HAN01SP4/en/hana_sps4_HDB_server_inst_en.pdf
You can rename an SAP HANA database system as described in this section.
Caution:
Renaming a SAP HANA database system that is running with a permanent SAP license invalidates the
license so that the instance is locked down.
You need to request a new license key with the new system
ID and the new hardware key
(generated by renaming) in order to unlock the renamed system.This especially impacts renaming in batch mode: since the renamed instance is locked down,no other activities except license installation are then possible.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0050
For more information, see SAP License Key.
Before performing the rename, you need to meet these prerequisites:
You identify an existing SAP HANA database system, created by an installation or a file system
copy, that is to be renamed.
The target system ID (SID) must not exist.
The target instance number must not exist.
You are logged in as the root user.
If a mountpoint contains the system ID, you must first rename it manually before performingthe
rename of the SAP HANA database.
To rename the instances of a distributed system, you perform the rename for all hosts with a single call ofhdbrename.
Renaming a System in Interactive Mode
Make sure that you meet the prerequisites in Renaming a SAP HANA Database System .
In interactive mode, the program queries all essential parameters that are not defined usingcommand line options as well as parameters that have invalid values.
a. Open a root shell.
b
. Via the local mount point, change to the following directory on the shared file system:
///global/hdb/install/bin
c. Call the hdbrename program by entering this command:
./hdbrename
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0051
d
. Specify the required data.
The system is now renamed.
34) hdbnsutil
Example Usage:
OSS Note 1738390 - How to update SAP HANA Linux server hardware key
When you have installed SAP HANA, you want to update the Linux server hardware key.
Prerequisite: You have logged on to Linux as SAP HANA instance administrator.
To update the hardware key, follow the procedure below:
Stop the SAP HANA DB instanceRemove line 'id='in /usr/sap//SYS/global/hdb/custom/config/nameserver.ini
Execute 'hdbnsutil -convertTopology'
Start the SAP HANA DB instance
NOTE: Reinstallation of SAP HANA will generate a different hardware key,but upgrade of SAP HANA will not change the hardware key.
35) hdbsrvutil - Example Usage
https://cookbook.experiencesaphana.com/bw/operating-bw-on-hana/hana-database-administration/troubleshooting/sap-support/location-and-usage/
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0052
Collecting Location and Usage Information
There is a Python script which allows you to collect support information for customer systemseven when no access to the system via SQL is possible.
This information can be added to the support message.
The name of the Python script is fullSystemInfoDump.py and is part of a server installation.
It runs from a command line and is located in the directory $DIR_INSTANCE/exe/python_support (Linux).
To execute the script adm rights of the customer system are required.
To start the script out of its location directory, enter: python fullSystemInfoDump.py
By default the script creates a zip file with all of the collected support information to the directory
DIR_TEMP/system_dump where DIR_TEMP is the content of the variable with the same name in sapprofile.ini.
This output directory is shown as console output when the script is running, but it can be looked up by entering:
hdbsrvutil -z | grep DIR_TEMP=
To change the default directory, an explicit absolute path can be given to the script, for example:
python fullSystemInfoDump.py
Usage information can be displayed by entering:
python fullSystemInfoDump.py h
To collect support information you need an SQL user with rights to select the system tables andviews listed in System Tables/Views.
For security reasons the user name and password for this SQL user cannot be given as commandline parameters to the script.
If the customer system can be reached via SQL and the user name and password information is valid,the script starts collecting support information. If user name and/or password are invalid, the script aborts.
If the customer system cannot be reached via SQL the script only collects information which can beread without SQL access. The resulting zip file name has the following structure:
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0053
fullsysteminfodump________.zip
SAPLOCALHOSTFULL and SAPSYSTEMNAME are again taken from sapprofile.ini.
36) Show Hana Processes HDB proc & HDB info
HDB proc
HDB info
eg /usr/sap/HDB/HDB00/HDB info
37) Hana System Management SQL Administration Statements Reference
http://help.sap-ag.de/hana/html/_csystem_management_statements.html
38) Hana SQL Reference Manual
http://help.sap-ag.de/hana/html/sqlmain.html
39) SAP Hana SQLScript Reference
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0054
http://help.sap.com/hana/hana_dev_sqlscript_en.pdf
40) SAP Hana Technical Operations Manual
http://help.sap.com/hana/hana_tom_en.pdf
41) SAP Hana Administration Guide
http://help.sap.com/hana/hana_admin_en.pdf
.
42) SAP HANA Administration tables/views
A great blog by Balaji Rajendran explaining some of the most important HANA tables/views required foradministration
http://scn.sap.com/community/hana-in-memory/blog/2013/05/29/sap-hana-administration-tablesviews
43) The time stamps for the "Start Time" in Data Provisioning of HANA Studio are UTC time
The time stamps are supposed to be displayed as UTC time in Data Provisioning of HANA Studio.
It was a design decision to use UTC time to allow the replication schema to accommodate systems
from differing time zones. Using UTC time simplifies this task as then it is not necessary to
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0055
consider the time zone for each of the connected SLT and their respective source systems. The
time stamps you see in Data Provisioning match the internal time stamps which are used in the
replication process on each connected SLT system.
The system works as designed.
1861325 - HANA: "Start Time" of replication on all tables are UTC time in Data Provisioning of HANA Studio
44) How to Check SUSE Linux Distribution Version and Patch Level
If you are not sure which SUSE distribution you are using, execute the followingcommand to identify the release version and patchlevel.
cat /etc/SuSE-release
If you are running on SLES 11 SP2 the following values should be shown:
SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 2
44b) How to View the SAP Hana Edition & Revision
To view which revision of SAP Hana you are using go to /usr/sap//lm_structure and view the
landscapeDescription.xml file
45) Remove the SAP HANA Extended Application Service (SAP HANA scriptserver) from thetopology of your SAP HANA database
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0056
You want to remove the SAP HANA Extended Application Service (SAP HANAscriptserver) from the topology of your SAP HANA database (DB) because you do notuse any applications that require SAP HANA scriptserver.Or you would like to restore the backup created when the SAP HANA script server was not activated.
You must not simply stop the SAP HANA script server service. Since it has its own persistency,it is relevant for backups. A data backup fails if the SAP HANA scriptserver volumes are stillentered in the topology but the service is not running.
Carry out the following steps to stop SAP HANA script server and remove SAP HANA scriptserver from thetopology:
o Stop all the applications that use the database. This is required
because a new data backup has to be created after you remove SAP
HANA scriptserver. A log replay over the time of the service
removal is not supported.
o Determine all the hosts on which SAP HANA scriptserver services
are active:
select host from m_services where service_name ='scriptserver'
o Determine the volume ID of the SAP HANA scriptserver services:
select VOLUME_ID from m_volumes where service_name =
'scriptserver'
o Stop the SAP HANA scriptserver services. To do this, carry out
the following command for every with an SAP HANA
scriptserver service:
ALTER SYSTEM ALTER CONFIGURATION ('daemon.ini', 'host', '') UNSET ('scriptserver','instances') WITH RECONFIGURE
o Remove the SAP HANA scriptserver service entry from the topology.
To do this, carry out the following command for every
with an SAP HANA scriptserver service:
ALTER SYSTEM ALTER CONFIGURATION ('topology.ini', 'system')
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0057
UNSET ('/host/', 'scriptserver') WITH RECONFIGURE
o Remove the volumes from the topology. To do this, carry out
the following command for every of an SAP HANA
scriptserver service:
ALTER SYSTEM ALTER CONFIGURATION ('topology.ini', 'system') UNSET ('/volumes', '') WITH RECONFIGURE
Caution: It can be a risk to make changes to the topology.
Therefore, carefully check the host and the volume ID.
o Create a new data backup.
o Start the applications that use the database.
Ref: 1867783 - XFS Data Inconsistency Bug with SLES 11 SP2
46) HANA Alerts related to File System Utilization
Statisticserver alerts are triggered on HANA side:
Hana Alert 2 - Disk usage
Hana Alert 30 - Internal disk-full event
Hana Alert 50 - Number of diagnosis files
Hana Alert 51 - Size of diagnosis files
Volume Size vs. Disk Usage
In general, two types of storage space utilization have to be distinguished: Disk (file system)usage and space consumed (internally) in the volumes attached to the HANA database.Both aspects are summarized in the overview tab in HANA studio
Total Disk Usage represents the file system point of view and is identical to whatOS commands like 'df' are displaying:
df -h
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0058
/dev/sdd1 99G 32G 63G 34% /hanamnt/data/HDB
/dev/sde1 50G 3.7G 44G 8% /hanamnt/log/HDB
/dev/sdf1 30G 19G 9.3G 67% /hanamnt/HDB
Volume size refers to the size of the HANA volumes on file system level
This is effectively the output of the following SQL statement:
select v1.host, v1.port, v1.service_name, v1.volume_id,
v1.subpath, v2.data_size, v2.log_size, d.disk_id,
d.device_id, d.path, d.usage_type, d.total_size,
d.used_size
from ( ( m_volumes as v1 join M_VOLUME_SIZES as v2 on v1.volume_id = v2.volume_id ) right outer join m_disks as d on d.disk_id = v2.disk_id
)If there is a huge difference between Volume Size and Disk Usage, this wouldindicate that a lot of space on files system level is consumed by files not relatedto data volumes, log volumes or trace files. In this example, this is true for thetrace volume. All trace files together just consume around 100 MB, but consumeddisk space is actually close to 19 GB:
select sum(file_size) / 1024 / 1024 as size_mb from m_tracefiles
SIZE_MB
117,222
In cases like this, the 'du' command, executed against the file system in question,can reveal the root cause:
du -hS /hanamnt/HDB | awk '{print $1 $2}' | sort -h +0 -1
259M/hanamnt/HDB/hdbstudio_update/repository/plugins
620M/hanamnt/HDB/hdbclient
797M/hanamnt/HDB/global/hdb/custom/config/lexicon/lang
7.4G/hanamnt/HDB/exe/linuxx86_64/HDB_1.00.51.374135_1005022
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0059
7.9G/hanamnt/HDB/exe/linuxx86_64/HDB_1.00.55.376513_1078043
The file system containing the trace files also contains the executables of HANA software(present and previous version), hence the difference in volume and disk usage.
Volume Size and Volume Utilization
Data Volumes
If the percentage of unused space is high, shrinking the volume can be considered.The relevant system management command is outlined in SAP HANA Reference:
ALTER SYSTEM RECLAIM DATAVOLUME.
In order to find out which column store tables are occupying most of the space inside the volumesyou can use the following SQL statement:
select top 30 table_name, sum(physical_size) from M_TABLE_VIRTUAL_FILESgroup by table_name
order by 2 descLog Volumes
The number of log segments that consume space can either be determined using HANA Studioor using SQL statements against view M_LOG_SEGMENTS
SAP note 1679938 explains how to free space in case that the log volume is full.
Trace Files
If the trace files are contributing to the disk usage of the file system where they are located(see section Volume Size vs. Disk usage), then 2 cases have to be distinguished:
Space consumed by a large number of files that are not exceptionally large or
Individual files that are significantly larger than expected.
The number and size of existing trace files is influenced by the following factors:
(1) Activated trace components. This can be verified by using the following SQL statement:
select distinct("SECTION") as "TRACE"from SYS.M_INIFILE_CONTENTS where (("SECTION"='trace')or ("SECTION"='sqltrace' and "KEY"='trace' and "VALUE" = 'on')or ("SECTION" like 'traceprofile_%')
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0060
or ("SECTION" = 'expensive_statement' and "KEY"='enable' and "VALUE" = 'true'))and "LAYER_NAME" = 'SYSTEM'(2) Incorrect configuration of trace file rotation:
The relevant parameters are maxfiles and maxfilesize(see HANA administration guide chapter 'Configuring Trace File Rotation')
ref: 1870858 - HANA Alerts related to files system utilization
47) Log Volume is Full and the Database Doesn't Accept Any New Requests
If the log_mode is set to legacy the logvolume keeps all log segments since the last full backup in thelogvolume.
If no backups are performed the logvolume can run out of space.
Solution
1. Stop the database:
HDB stop
2. Change into the folder mnt00001 of the logvolume (Default: /usr/sap//global/hdb/log):cd /usr/sap//global/hdb/log/mnt00001
3. You have to move one of the logvolumes temporarily to another volume where enough space is available.
You should free at least 2 GB of space to ensure that the database has enough space to start.
To find out the space consumption of each volume execute:
du -sh *
4. Move a volume which consumes at least 2 GB of space (e.g. hdb00003)to a volume with enough free space,
e.g. to the data volume (Default: /usr/sap//global/hdb/data):mv hdb00003 /usr/sap//global/hdb/data
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0061
5. Create a symbolic link to the new folder in the old location:
ln -s /usr/sap//global/hdb/data/hdb00003 /usr/sap//global/hdb/log/mnt00001/hdb00003
6. Start the database (HDB start) and perform a backup
7. Use the following SQL-Statement to clean up the logvolume:
ALTER SYSTEM RECLAIM LOG;
8. Stop the database again and remove the symbolic link:
rm -f /usr/sap//global/hdb/log/mnt00001/hdb00003
9. Move the log volume back to its original location:
mv /usr/sap//global/hdb/data/hdb00003 /usr/sap//global/hdb/log/mnt00001
10. Start the database (HDB start)
ref: 1679938 - Log Volume is full (log mode = legacy)
48) Using the REGI Tool to Deploy Content for Delivery Units for example Translated Texts
HANA content is organized in software components called "delivery units" ("DUs").DUs are distributed in the physical form of DU-TAR-GZ-files.
As for texts (e.g. view column descriptions), the DU TAR-GZ-files contain only thetexts in the original language (typically, English), but no translated texts (e.g. for German, Chinese etc.).
Translated texts for DUs are distributed in the form of Languages-DU-TAR-GZ-files.At the moment (HANA SP5/revision 45), those cannot be imported using the SAP HANA Studio.
To deploy translated texts, the command line tool "Regi" can be used.
"Regi" is bundled with the HANA client installation (it is also bundled with the HANA server installation).
Note that Regi is only included in the 64bit Windows and Linux versions of the HANA client.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0062
Here is a step-by-step guide to deploy translated texts using Regi:
1) Start a command line window and navigate to the folder of your HANA client installation.
On Windows, the default location is:
C:\Program Files\sap\hdbclient
On Linux, the default location is:
/usr/sap/hdbclient
2) Set the user, password, host and port of the connection to the HANA system using environment variables.
On Windows, the commands are:set REGI_HOST=:315
set REGI_USER=
set REGI_PASSWD=
where "" is a two-digit number identifying the instance number of the HANA system.
On Linux (bash), replace the command "set" with "export":export REGI_HOST=:315
export REGI_USER=
export REGI_PASSWD=
3) Import the Languages-DU-TAR-GZ-file with the following command:
regi import languages
Note that further help for the REGI command can be accessed as follows:
regi help import languages
ref: 1805967 - Deployment of Translated Texts for Delivery Units
49) Homogeneous System Copy on SAP HANA
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0063
This is the procedure of the homogeneous system copy of SAP HANA using backup and recovery.
The prerequisites are that you have installed an SAP system with SAP HANA as the primary databaseand you have installed SAP HANA Studio in which the database that is to be copied is set up as a system.
The version of the SAP HANA database server must be at least Version 1.00 Revision 28.
For carrying out the system copy, you must use SWPM 1.0 Support Package 1 or higher.
The scenario for this reference example is: You want to copy the BW system PRD connected to the databasePR1 to the BW system DEV connected to the database DV1. The name of the ABAP schema in PR1 isSAPPRD.Therefore, PRD is the source system (the system that is to be copied), PR1 is the source database (thedatabasesystem that is to be copied), DEV is the target system (the copied system), and DV1 is the target database(the target database system). SAPPRD is the (database) schema (the schema name) or the database user ofthe system.
Procedure
1. Use SAP HANA Studio to create a database backup.
For a full description of the procedure and the SAP HANA backup options, refer to
SAP HANA Database - Backup and Recovery Guide on SAP Help Portal.
a) In SAP HANA Studio, right-click the database system that is to be copied and choose "Backup...".b) If possible, select "Complete Data Backup" as the Backup Type and "FILE" as the Device Type.Under Location, enter a directory in which the backup files are to be stored and enter a prefix for thebackup files under Backup File Prefix.
Ensure that the backup directory contains sufficient free space for the backup and that no backup thathas the same prefix already exists there. Then choose "Next".
c) Check your entries and choose "Finish" to start the backup or choose "Back" to correct your entries.d) Wait until the backup has been created and then close the dialog box.2. Transfer the backup to the target system.a) Copy all backup files to the standard backup directory of the target database system. The backup filesare saved in the standard backup directory of the source database system and begin with the prefixentered in step 1. The standard backup directory is defined in the database parameter
global.ini -> persistence -> basepath_databackup.
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0064
3. Use SWPM to import the backup.
a) Start SWPM.b) Choose -> -> System Copy -> Target System -> ->Based on -> Standard System.
c) Follow the dialogs.d) In the dialog SAP System Database,
choose Homogeneous System Copy (SAP HANA-specific Backup/Recovery).e) In the Database Schema dialogs, enter the schema names and the passwords that match the datain the backup. For example, if you install a system DEV and use a backup of the system PRD for theinstallation, you must specify SAPPRD as the schema in the dialogs but not SAPDEV.The same applies to the DBA Cockpit schema.f) In the dialog Database Recovery, enter the name (prefix) of the backup. In addition, you can specifywhether you want the system to check whether the backup exists. If this check is deactivated and thebackup does not exist, the installation will terminate with an error at a later time. You also have to specifythe password of the adm user of the database and the SAPControl URL. The system prefills theSAPControl URL; it usually does not have to be changed.
4. Installation
a) After you complete the following dialogs, you can start the installation.b) During the installation, the system may issue an error message such as:
Error during execution of HdbCmdClazz 'ABAP_PRE_LOAD_EXECUTION'com.sap.hdb.core.main.cmd.HdbCmdMain
Error during execution of SQL command:ALTER SYSTEM ALTER CONFIGURATION ('indexserver.ini', 'SYSTEM' ) SET('distribution', 'client_distribution_mode') = 'statement' WITH RECONFIGURE SAPDBTech JDBC: [437]: only commands for license handling are allowed in current state:)
-
SAP HANA and In-Memory Business Data Management: The SAP Hana Reference for NetWeaver BasisAdministrators
Generated by Jive on 2013-12-24+01:0065
5. Additional adjustments after the installationa) Check the secondary database connections.After you copy the database, the target system has the same database connections (for example, for the DBACockpit)as the source system; this may cause problems.
Therefore, you must check the database connections in transaction DBCO and adjust them if required.
b) Check the RFC connections.After you copy the database, the target system has the same RFC connections as the source system;this may cause problems.
Therefore, you must check the RFC connections in transaction SM59 and adjust them if required.
c) Check the spool configuration.After you copy the database, the target system has the same spool configuration as the source system.
Therefore, you must check the spool configuration in transaction SPAD and adjust it if required.
6. The system copy is now complete.
ref: OSS Note 1763333 - Homogeneous system copy on SAP HANA
50) HANA License Key Request and Installation
To request your license key, always access SAP Service Marketplace at http://service.sap.com/licensekey(this is a simple and safe way to request your license key).Data required for the license key request:
Installation number, system ID, system type, SAP product, product version, hardware key,operating system, and main memory amountThe incoming requests are processed automatically