Download - ANTENNAS RYMSA 2014
-
8/11/2019 ANTENNAS RYMSA 2014
1/132
-
8/11/2019 ANTENNAS RYMSA 2014
2/132
-
8/11/2019 ANTENNAS RYMSA 2014
3/132
Since 1974, RYMSA RF has specialized in the
implementaon of complex broadcast radio and TV
antenna systems providing turnkey services for customerson all ve connents. Our experse in this eld has been
strongly developed over the years leading us to todays
market leadership posion, with capabilies to manage
each project from conceptual design to on-site installaon
and commissioning.
RYMSA RF has deployed broadcast antenna systems
from the Equator to the Arcc Circle, providing reliable
service in extreme environmental condions such as
high elevaons, strong winds, heavy icing, intense solarradiaon and high levels of humidity and salinity.
Customized radiang soluons of high complexity are
one of our speciales. Mul-panel or skew panel arrays for
large cross-secon towers, embedded antenna systems and
mul-paern arrays have all been engineered by RYMSA RF
to sasfy the most dicult antenna paern requirements.
Mul-channel service and high-power capability are
common requirements of todays modern broadcaster and
RYMSA RF antenna systems have the strongest market
reputaon in terms of reliability when these needs arise.
BROADCAST ANTENNA SYSTEM SOLUTIONS
1
-
8/11/2019 ANTENNAS RYMSA 2014
4/132
FILTERS AND CHANNEL COMBINERS FOR RADIO AND TV
RYMSA RF has a successful history of supplying
mul-channel combiners to radio and TV broadcasters
worldwide. Every possible channel-combining requirementcan be achieved with RYMSA RFproducts, ranging from low
power applicaons to very high power systems including
large numbers of channels and very close channel spacing.
Depending on the needs of each site, RYMSA RF
can supply dierent types of combiners such as constant
impedance, manifold, star-point or commutang line
(stretch-line). As per customer request, patch panel
systems can be integrated in our channel combiners.
Our experse includes the ability to provide emissions
mask lters for digital TV signals of any standard and any
power level. We oer a complete line of re-tunable channel
combiners and mask lters that can be tuned to any channel,
even for adjacent channel condions.
In addion to lters and combiners, we supply great
stand-alone components including power combiners and
dividers, hybrids, switches and direconal couplers.
2
-
8/11/2019 ANTENNAS RYMSA 2014
5/132
RF DESIGN & ENGINEERING
All key parameters of broadcast RF systems, such as radiaon paerns, coverage
calculaons and RMS and peak power handling are maer of close scruny by RYMSA
RFengineers. Cung-edge computer-aided design tools enable us to provide opmum
results for a wide variety of technical requirements.
In addion to our in-house proprietary soware, we have the best commercial
design tools available to guarantee the best performance, including SUPERNEC, CST,
FEKO and ICS Telecom. These powerful tools, together with the experience and experse
necessary to use them accurately, guarantee the best possible performance of our products
and the best value for the broadcaster.
RYMSA RF is connuously invesng in the maintenance and
upgrade of in-house test equipment at our manufacturing facilies
located in Spain and USA in order to ensure a high level of accuracy in thevericaon of our designs. All RF components and assemblies designed
by RYMSA RF are put through stringent electrical, mechanical and
environmental tesng in our state-of-the-art facilies that include:
Several far-eld antenna ranges and two indoor compact
antenna ranges, working from 6 MHz to 40 GHz.
Network analyzers with a full range of calibraon kits for all
relevant transmission lines types and sizes.
RMS and peak power test sets.
Vibraon tables. Vacuum chambers.
Salt spray corrosion chambers.
Temperature chambers.
The use of these state-of-the-art facilies, in strict accordance with
our quality management system endorsed by the DIN EN ISO 9001
Cercaon, guarantees the highest possible quality of all our products.
TEST FACILITIES
3
-
8/11/2019 ANTENNAS RYMSA 2014
6/132
4
-
8/11/2019 ANTENNAS RYMSA 2014
7/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,100
28500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]
Web: www.rymsarf.com
Facilities
Clients
Sales office
RYMSA RF belongs to TRYO Technologies, a spanish technology group of
consolidated companies focused on providing completed solutions to our clients in a
wide range of the professional telecommunications and radio frequency applications
for broadcast, space, critical communications, scientific and defence.
5
-
8/11/2019 ANTENNAS RYMSA 2014
8/132
6
-
8/11/2019 ANTENNAS RYMSA 2014
9/132
TABLEOFCONTENTS
TVANTENNASYSTEMS.....................................................................................................................9VHFBandITVAntennas..................................................................................................................11VHFBandIIITVAntennas................................................................................................................15
UHFBand
IV
V
TV
Antennas
............................................................................................................
26
RADIOANTENNASYSTEMS.............................................................................................................33BandIIRadioAntennas....................................................................................................................35LinearPolarization......................................................................................................................35CircularPolarization....................................................................................................................43
DABVHFBandIIIAntennas.............................................................................................................52
ANTENNASYSTEMSSPLITTINGNETWORK....................................................................................55
PowerSplittersallbandsI,II,III,IV/V............................................................................................55
Interconnectionlines.......................................................................................................................56
DTVMASKFILTERS&COMBINERS.................................................................................................57MaskFilters......................................................................................................................................59
MaskCombiners..............................................................................................................................69
Liquidcoolingsystem.......................................................................................................................80
TVNONMASKCOMBINERS............................................................................................................81VHFBandITVconstantimpedanceChannelCombiners................................................................83VHFBandIIITVChannelCombiners................................................................................................86Constantimpedance...................................................................................................................86
Starpoint
....................................................................................................................................
89
UHFBandIV/VChannelCombiner..................................................................................................90Constantimpedance...................................................................................................................90Starpoint....................................................................................................................................95
Stretchline..................................................................................................................................96
RADIOCOMBINERS.........................................................................................................................97
BIIConstantImpedance..................................................................................................................98
BIIStarpoint.................................................................................................................................104
RFPASSIVE
COMPONENTS
AND
ACCESSORIES
............................................................................
105
15/8".............................................................................................................................................10631/8".............................................................................................................................................10841/2".............................................................................................................................................11061/8".............................................................................................................................................11293/16"...........................................................................................................................................114Connectorsforcoaxialcables........................................................................................................116GasBarriers....................................................................................................................................117Finematchers................................................................................................................................118Flanged90elbows........................................................................................................................119Adapters.........................................................................................................................................120Measurementdirectionalcouplers...............................................................................................1223dBhybrids...................................................................................................................................123
Coaxialpatch
panels
......................................................................................................................
124
Patchpanel/dividers....................................................................................................................125Motorizedcoaxialswitches...........................................................................................................127Coaxialswitch/dividers................................................................................................................128
TV
ANTENNA
S
YSTEMS
RADIO
ANTENNA
SYSTEMS
ANTENNA
SYST.SPLITTING
NETWORK
DTVUHF
MASKFILTERS
&COMBINERS
TVNONMASK
COMBINERS
RADIO
COMBINERS
RFPASSIVECOMPONENTS&ACCESORIES
TV
ANTENNA
S
YSTEMS
7
-
8/11/2019 ANTENNAS RYMSA 2014
10/132
8
-
8/11/2019 ANTENNAS RYMSA 2014
11/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
TV Antenna systems
RYMSA RF manufactures a broad range of antennas for the transmission of TV signals in the VHF and UHFbands.
Antenna systems are currently formed by stacking single radiating elements properly disposed and fed with theadequate phase and amplitude. These unitary radiators can be either directional, as those based on panel or cavitysolutions, or dipole-style providing omni or quasi-omnidirectional performances.
RYMSA RF designs the single antenna elements succeeding in the challenge of displaying the necessaryruggedness minimizing wind load and weight, and ready to remain weatherproof for a long life withstanding anysort of extreme climatic conditions. This versatility allows using them also individually for simple needs such as relaysites.
Power dividers and interconnecting lines (both flexible and rigid), are utilized to build the distributionnetwork which transports the signals from the main transmission line up to each radiating element. The veryassorted range of different models of these products manufactured by RYMSA RF ensures the capability of satisfying
any possible request, from simple arrays to complex high power antenna systems.
The antenna systems can be conceived either to be installed on the site mast element by element, andtherefore supplied partially disassembled, or fully assembled in plant and delivered as a unitized integrated product.Examples of the latter are the UHF panel spines and the superturnstile antennas.
VHF TV Antennas
RYMSA RF AT11 series for B-I and AT13 series for B-III constitute
a comprehensive range of antennas for these frequencies.
Panel systems: the arrays of panels are the most versatile solution to
implement radiation patterns customized to any particular coveragerequirement. Ideal for middle to big masts and multichannel operation,
they also allow reaching the high power ratings frequently required in
those situations. RYMSA VHF TV panel systems can be classified as
follows:
Band I: Horizontally polarized panels of two dipoles, with
models for 4-around (square) and 3-around (triangular)
arrays, working either at a single channel or across extended
bandwidths.
Band III: Horizontally and vertically polarized panels of two
and four dipoles, working for the whole band, allowing to buildsquare and triangular arrays. Robust design for hard
environments and lighter versions for simpler systems are
available.
Other antenna solutions marketed by RYMSA RF for VHF TV
applications are:
Versatile antenna systems: a unique solution in vertical
polarization based on a simple kit of active and passive dipoles
allowing to customize on site the type of HRP. Available for
both B-I and B-III.
TV VHF B-I and B-III antennas basedon panel arrays
TV
ANTENNA
S
YSTEMS
9
-
8/11/2019 ANTENNAS RYMSA 2014
12/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
TV Antenna systems
UHF TV Antennas
RYMSA RF AT15 series are compiling several types of antennas for TVapplications within the B-IV/V range.
Panel systems: with equivalent characteristics as those previously
described for VHF, panel arrays are the best choice for situations
involving multichannel needs and tailored patterns. UHF panel
systems are frequently delivered as a fully integrated antenna, with all
the elements pre-assembled on a spine that also may be fully
enclosed in a GRP cylinder. Several models are available:
Horizontal polarization panels: suitable for the
implementation of square, pentagonal and multi-panel
arrangements, and with several input connector options to
achieve any possible power request.
Vertical polarization panel: designed for broadband operation,
it is available with several input connector options.
Elliptical polarization panels: especially conceived for
assembling antenna systems meeting the new challenges of
the market on non-linear polarization, the antenna can be
supplied either with a power splitting hybrid neatly integrated
on its frame, or with two connectors, one per polarization
component.
Superturnstile antennas: there are several versions, all ready for
multichannel applications, and ranging from low to high power
handling.
TV UHF B-IV/V multipanel antennasystems
TV UHF high power superturnstileantenna under factory tests
TV
ANTENNA
S
YSTEMS
10
-
8/11/2019 ANTENNAS RYMSA 2014
13/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band I versatile antenna system
Top-mount vertical polarization
Model: AT11-111
This type of antenna system allows selection of the horizontal radiation pattern in the field that best fulfils agiven application using either all or only part of the elements provided in a kit. Upon the number of elementsused and the configuration installed, either directional, peanut or quasi-omnidirectional horizontal radiation
patterns can be obtained.
The antenna system allows the implementation of a complete secondary low power network in a very short time.The system is top mounted by means of a supporting pipe included in the kit.
Two active and two parasitic dipoles, together with the splitter and dipole-feeding cables complete the kit.
Frequency range 54 - 88 MHz (One model per FCC channel)
Peak gainDirectional Peanut
Quasi-
omnidirectional
7.5 dB(ref. /2 dipole)
3.5 dB(ref. /2 dipole)
5.7 dB(ref. /2 dipole)
Polarization Vertical
Impedance 50 Ohm
VSWR Visual:1.22:1 Aural:1.50
Maximum power handling peak sync 500 W
Maximum power handling RMS 350 W
Connector type DIN 7/16
Pressurization Non pressurized
NOTE: Mechanical data supplied for the larger system, which corresponds to channel 2 FCC
Materials Hot dip galvanized steel
Configuration Directional PeanutQuasi-
omnidirectional
Aperture of radiating elements 5940 mm 2340 mm 5940 mm
Wind load @160 Km/h (including pipe) 1814 N 1322 N 1322 N
Weight 170 kg 136 kg 141 kg
Maximum wind speed 120 km/h
Mounting Top mounted on pipe
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
PEANUT
Electrical Specifications
Mechanical & Environmental Specifications
QUASI-ONMIDIRECTIONAL
H-planeHorizontal Pattern
H-planeHorizontal Pattern
H-planeHorizontal Pattern
TV
ANTENNA
S
YSTEMS
11
-
8/11/2019 ANTENNAS RYMSA 2014
14/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band I 2 dipoles panel
Especially suitable for square masts
Model: AT11-220
Frequency range 54 88 MHz
Channels
2 4 FCC 3 5 FCC 4 6 FCC
Individual FCC channels available onrequest
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 72 H-plane: 62
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.2:1Maximum power handling peak sync(per connector)
2 x 3 kW 2 x 6 kW
Connector type (2 per antenna) 2 x DIN 7/16 2 x EIA 7/8
Pressurization Non pressurizedGas barrier oninput connector
Channels 2 4 FCC 3 5 FCC 4 6 FCC
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H)
2730 x1213 x
3630 mm
2730 x1087 x
3380 mm
2220 x1000 x
3000 mm
Maximum wind speed 200 km/h
Wind load @ 160 Km/h (front) 1800 N 1747 N 1600 N
Wind load @ 160 Km/h (lateral) 925 N 905 N 790 NWeight 102 97 85
Typical mounting Square arrangement tower
Vertical spacing between dipoles 2550 mm 2310 mm 2005 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load
(@160km/h)
System
height(mm)
1
2 5.5 204 2.7 kN
36303 3.7 306 3.7 kN
4 2.5 408 4.6 kN
2
2 8.5 408 5.5 kN
87303 6.7 612 7.3 kN
4 5.5 816 9.1 kN
4
2 11.5 816 10.9 kN
189303 9.8 1224 14.6 kN
4 8.5 1632 18.2 kN
6
2 13.3 1224 16.4 kN
291303 11.5 1836 21.9 kN
4 10.3 2448 27.3 kN
8
2 14.5 1632 21.8 kN
393303 12.8 2448 29.2 kN
4 11.5 3264 36.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.
- Wind load & weight figures withoutconsidering cables, splitters & hardware
Antenna System Characteristics (Channel 2-4 Model)
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
12
-
8/11/2019 ANTENNAS RYMSA 2014
15/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band I 2 dipoles panelEspecially suitable for triangular mastsModel: AT11-223
Frequency range 54 88 MHz
Channels
2 4 FCC 3 5 FCC 4 6 FCC
Individual FCC channels available onrequest
Peak gain 7.0 dB (ref. /2 dipole)
3 dB beam width E-plane: 80 H-plane: 62
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling peak sync(per connector)
2 x 3 kW 2 x 6 kW
Connector type (2 per antenna) 2 x DIN 7/16 2 x EIA 7/8
Pressurization Non pressurizedGas barrier oninput connector
Channels 2 4 FCC 3 5 FCC 4 6 FCC
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H)2730 x 1425x 3630 mm
2730 x 1313x 3380 mm
2220 x 1208x 3000 mm
Maximum wind speed 200 Km/h
Wind load @ 160 Km/h (front) 1793 N 1740 N 1593 N
Wind load @ 160 Km/h (lateral) 922 N 902 N 792 N
Weight 98 94 84
Typical mounting Triangular arrangement tower
Vertical spacing between dipoles 2550 mm 2310 mm 2005 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(Kg)
Wind load
(@160
Km/h)
System
height (mm)
12 4.0 196 3.5 kN
36303 2.2 294 5.2 kN
22 7.0 392 7.0 kN
87303 5.2 588 10.4 kN
42 10.0 784 13.9 kN
189303 8.3 1176 20.7 kN
62 11.8 1176 20.9 kN
291303 10.0 1764 31.1 kN
82 13.0 1568 27.9 kN
393303 11.3 2352 41.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only for
simplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware.
Antenna System Characteristics (Channel 2-4 Model)
TV
ANTENNA
S
YSTEMS
E-planeHorizontalPattern
H-planeVerticalPattern
H-planeVerticalPattern
13
-
8/11/2019 ANTENNAS RYMSA 2014
16/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band I circular polarization2 crossed dipoles panelEspecially suitable for triangular mastsModel: AT11-303
Frequency range54 88 MHz
(One model per FCC channel)
Peak gain 4.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 92 H-plane: 92
Polarization Circular
Impedance 50 Ohm
VSWR 1.1:1 (with circular polarization)
Maximum power handling peak sync.(per connector)
6 kW(3 kW)
10 kW(6 kW)
22 kW(11 kW)
Connector type (2 per antenna)2 x
DIN 7/162 x
EIA 7/82 x
DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
Fully pressurized as an option
Materials Hot dip galvanized steel
Dimensions (W x D x H) 2590 x 1351 x 2590 mm
Maximum wind speed 200 Km/h
Wind load (front) 1600 N (@160 Km/h)
Wind load (lateral) 610 N (@160 Km/h)
Weight 110 kg
Typical mounting Triangular arrangement towerClamp type To 80 115 mm pipe
Vertical spacing 4200 mm typical
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(kg)
Wind load(@160
Km/h)
Systemheight
(mm)
12 1.8 220 2.9 kN
2590
3 0.1 330 4.3 kN2
2 4.8 440 5.9 kN6790
3 3.1 660 8.5 kN
42 7.8 880 11.7 kN
151903 6.1 1320 17.1 kN
62 9.6 1320 17.6 kN
235903 7.8 1980 25.5 kN
82 10.8 1760 23.4 kN
319903 9.1 2640 34.1 kN
Electrical Specifications
Mechanical & Environmental Specifications (Channel 4)
Antenna System Characteristics
NOTES:
- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
TV
ANTENNA
S
YSTEMS
14
-
8/11/2019 ANTENNAS RYMSA 2014
17/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III versatile antenna system
Top-mount vertical polarization
Model: AT13-111
This type of antenna system allows selection of the horizontal radiation pattern in the field that best fulfils a given
application using either all or only part of the elements provided in a kit. Upon the number of elements used andthe configuration installed, either directional, peanut or quasi-omnidirectional horizontal radiation patterns can beobtained.
The antenna system allows the implementation of a complete secondary low power network in a very short time.The system is top mounted by means of a supporting pipe included in the kit.
Two active and two parasitic dipoles, together with the splitter and dipole-feeding cables complete the kit.
Frequency range 174-216 MHz
Peak gain
Directional PeanutQuasi-
omnidirectional
7.5 dB(ref. /2 dipole)
3.5 dB(ref. /2 dipole)
5.7 dB(ref. /2 dipole)
Polarization Vertical
Impedance 50 Ohm
VSWR 1.3:1
Maximum power handling peak sync 500 W
Maximum power handling RMS 350 W
Connector type DIN 7/16
Pressurization Non pressurized
Materials Hot dip galvanized steelConfiguration Directional Peanut
Quasi-omnidirectional
Aperture of radiating elements 2230 mm 750 mm 2230 mm
Wind load @160 Km/h (including pipe) 1760 N 770 N 770 N
Weight 127 kg 118 kg 118 kg
Maximum wind speed 120 km/h
Mounting Top mounted on pipe
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Electrical Specifications
Mechanical & Environmental Specifications
QUASI-ONMIDIRECTIONAL
H-planeHorizontal Pattern
H-planeHorizontal Pattern
H-planeHorizontal Pattern
PEANUT
TV
ANTENNA
S
YSTEMS
15
-
8/11/2019 ANTENNAS RYMSA 2014
18/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsModel: AT13-220
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 69 H-plane: 59
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW 3.5 kW 6 kW
Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1250 x 500 x 1300 mm
Maximum wind speed 200 km/h
Wind load (front) 793 N (@160 km/h)
Wind load (lateral) 392 N (@160 Km/h)
Weight 38 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 5.5 76 1.2 kN
13003 3.7 114 1.6 kN
4 2.5 152 2.0 kN
2
2 8.5 152 2.4 kN
29003 6.7 228 3.2 kN
4 5.5 304 3.9 kN
4
2 11.5 304 4.7 kN
61003 9.7 456 6.3 kN
4 8.5 608 7.9 kN
6
2 13.3 456 7.1 kN
93003 11.5 684 9.5 kN
4 10.3 912 11.8 kN
8
2 14.5 608 9.5 kN
125003 12.7 912 12.6 kN
4 11.5 1216 15.8 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
16
-
8/11/2019 ANTENNAS RYMSA 2014
19/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT13-222
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 66 H-plane: 61
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW
Maximum power handling RMS 1.4 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsReflector & dipoles
Isolators
Hot dip galvanized steel(aluminium construction as option)
PTFE
Dimensions (W x D x H) 1200 x 440 x 1200 mm
Maximum wind speed 200 km/h
Wind load (front) 455 N (@160 km/h)
Wind load (lateral) 240 N (@160 km/h)
Weight 15 kg
Typical mounting Square arrangement tower
Clamp type To 50 70 mm pipeVertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(kg)
Wind load(@160km/h)
Systemheight(mm)
1
2 5.5 30 0.7 kN
12003 3.7 45 0.9 kN
4 2.5 60 1.2 kN
2
2 8.5 60 1.4 kN
28003 6.7 90 1.9 kN
4 5.5 120 2.3 kN
4
2 11.5 120 2.8 kN
60003 9.7 180 3.7 kN
4 8.5 240 4.7 kN
6
2 13.3 180 4.2 kN
92003 11.5 270 5.6 kN
4 10.3 360 7.0 kN
8
2 14.5 240 5.6 kN
124003 12.7 360 7.5 kN
4 11.5 480 9.3 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware.
Antenna System Characteristics
TV
ANTENNA
S
YSTEMS
E-planeHorizontalPattern
H-planeVerticalPattern
17
-
8/11/2019 ANTENNAS RYMSA 2014
20/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsFor extreme weather conditions (radome protected)Model: AT13-222R
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 66 H-plane: 61
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW
Maximum power handling RMS 1.4 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsRadomeReflector & dipolesIsolators
FiberglassAluminium
PTFE
Dimensions (W x D x H) 1210 x 520 x 1210 mm
Maximum wind speed 200 Km/h
Wind load (front) 1680 N (@160 km/h)
Wind load (lateral) 860 N (@160 km/h)
Weight 32 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipeVertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load
(@160Km/h)
System
height(mm)
1
2 5.5 64 2.5 kN
12103 3.7 96 3.4 kN
4 2.5 128 3.9 kN
2
2 8.5 128 5.0 kN
28103 6.7 192 6.8 kN
4 5.5 256 7.8 kN
4
2 11.5 256 10.0 kN
60103 9.7 384 13.6 kN
4 8.5 512 15.6 kN
6
2 13.3 384 15.0 kN
92103 11.5 576 20.4 kN
4 10.3 768 23.4 kN
8
2 14.5 512 20.0 kN
124103 12.7 768 27.2 kN
4 11.5 1024 31.2 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
18
-
8/11/2019 ANTENNAS RYMSA 2014
21/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 4 dipoles panelEspecially suitable for square mastsModel: AT13-240
Frequency range 174-230 MHz
Peak gain 10.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 69 H-plane: 25
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.1:1
Maximum power handling peak sync 2 kW 3.5 kW 6 kW
Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1250 x 500 x 2900 mm
Maximum wind speed 200 km/h
Wind load (front) 1590 N (@160 km/h)
Wind load (lateral) 950 N (@160 km/h)
Weight 68 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipeVertical spacing 3200 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 8.5 136 2.5 kN
29003 6.7 204 3.5 kN
4 5.5 272 4.3 kN
2
2 11.5 272 5.1 kN
61003 9.7 408 7.0 kN
4 8.5 544 8.5 kN
4
2 14.5 544 10.1 kN
125003 12.7 816 13.9 kN
4 11.5 1088 17.1 kN
6
2 16.3 816 15.2 kN
189003 14.5 1224 20.9 kN
4 13.3 1632 25.6 kN
8
2 17.5 1088 20.2 kN
253003 15.7 1632 27.8 kN
4 14.5 2176 34.2 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
19
-
8/11/2019 ANTENNAS RYMSA 2014
22/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 4 dipoles panelEspecially suitable for square mastsLight constructionModel: AT13-242
Frequency range 174-230 MHz
Peak gain 10.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 66 H-plane: 30
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW
Maximum power handling RMS 1.4 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsReflector & dipoles
Isolators
Hot dip galvanized steel(aluminium construction as option)
PTFE
Dimensions (W x D x H) 1200 x 440 x 2700 mm
Maximum wind speed 200 km/h
Wind load (front) 915 N (@160 km/h)
Wind load (lateral) 505 N (@160 km/h)
Weight 33 Kg
Typical mounting Square arrangement tower
Clamp type To 50 70 mm pipe
Vertical spacing 3200 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 8.5 66 1.4 kN
27003 6.7 99 1.9 kN
4 5.5 132 2.4 kN
2
2 11.5 132 2.8 kN
59003 9.7 198 3.9 kN
4 8.5 264 4.8 kN
4
2 14.5 264 5.7 kN
123003 12.7 396 7.7 kN
4 11.5 528 9.5 kN
6
2 16.3 396 8.5 kN
187003 14.5 594 11.6 kN
4 13.3 792 14.3 kN
8
2 17.5 528 11.4 kN
251003 15.7 792 15.4 kN
4 14.5 1056 19.1 kN
Electrical Specifications
Mechanical & Environmental Specifications
Antenna System Characteristics
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware.
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
20
-
8/11/2019 ANTENNAS RYMSA 2014
23/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for triangular mastsModel: AT13-223
Frequency range 174-230 MHz
Peak gain 7 dB (ref. /2 dipole)
3 dB beam width E-plane: 78 H-plane: 58
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW 3.5 kW 6 kW
Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurized
Gas barrier on inputconnector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1000 x 530 x 1300 mm
Maximum wind speed 200 km/h
Wind load (front) 664 N (@160 km/h)
Wind load (lateral) 488 N (@160 km/h)
Weight 36 kg
Typical mounting Triangular arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(kg)
Wind load(@160
Km/h)
Systemheight
(mm)
12 4.0 72 1.5 kN
13003 2.2 108 2.2 kN
2 2 7.0 144 3.0 kN 29003 5.2 216 4.3 kN
42 10.0 288 6.0 kN
61003 8.3 432 8.7 kN
62 11.8 432 9.1 kN
93003 10.0 648 13.0 kN
82 13.0 576 12.1 kN
125003 11.3 864 17.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
21
-
8/11/2019 ANTENNAS RYMSA 2014
24/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 4 dipoles panelEspecially suitable for triangular mastsModel: AT13-243
Frequency range 174-230 MHz
Peak gain 10 dB (ref. /2 dipole)
3 dB beam width E-plane: 78 H-plane: 26
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.1:1
Maximum power handling peak sync 2 kW 3.5 kW 6 kW
Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1000 x 530 x 2900 mm
Maximum wind speed 200 km/h
Wind load (front) 1465 N (@160 km/h)
Wind load (lateral) 976 N (@160 km/h)
Weight 65 kg
Typical mounting Triangular arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(kg)
Wind load(@160
km/h)
Systemheight
(mm)
12 7.0 130 3.2 kN
29003 5.2 195 4.6 kN
2 2 10.0 260 6.3 kN 61003 8.2 390 9.2 kN
42 13.0 520 12.6 kN
125003 11.3 780 18.5 kN
62 14.8 780 18.9 kN
189003 13.0 1170 27.7 kN
82 16.0 1040 25.2 kN
253003 14.3 1560 37.0 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
22
-
8/11/2019 ANTENNAS RYMSA 2014
25/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsModel: AT13-221
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 69 H-plane: 59
Polarization Vertical
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW 3.5 kW 6 kW
Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1300 x 500 x 1250 mm
Maximum wind speed 200 km/h
Wind load (front) 793 N (@160 km/h)
Wind load (lateral) 392 N (@160 km/h)
Weight 38 kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 4.5 76 1.2 kN
12503 2.7 114 1.6 kN
4 1.5 152 2.0 kN
2
2 7.5 152 2.4 kN
28503 5.7 228 3.2 kN
4 4.5 304 3.9 kN
4
2 10.5 304 4.7 kN
60503 8.7 456 6.3 kN
4 7.5 608 7.9 kN
6
2 12.3 456 7.1 kN
92503 10.5 684 9.5 kN
4 9.3 912 11.8 kN
8
2 13.5 608 9.5 kN
124503 11.7 912 12.6 kN
4 10.5 1216 15.8 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
H-planeHorizontalPattern
E-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
23
-
8/11/2019 ANTENNAS RYMSA 2014
26/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT13-227
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 66 H-plane: 61
Polarization Vertical
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW
Maximum power handling RMS 1.4 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsReflector & dipoles
Feed points radome
Hot dip galvanized steel(Aluminium construction as option)
PTFE
Dimensions (W x D x H) 1200 x 440 x 1200 mm
Maximum wind speed 200 km/h
Wind load (front) 455 N (@160 km/h)
Wind load (lateral) 240 N (@160 km/h)
Weight 15 kg
Typical mounting Square arrangement tower
Clamp type To 50 70 mm pipe
Vertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load
(@160km/h)
System
height(mm)
1
2 4.5 30 0.7 kN
12003 2.7 45 0.9 kN
4 1.5 60 1.2 kN
2
2 7.5 60 1.4 kN
28003 5.7 90 1.9 kN
4 4.5 120 2.3 kN
4
2 10.5 120 2.8 kN
60003 8.7 180 3.7 kN
4 7.5 240 4.7 kN
6
2 12.3 180 4.2 kN
92003 10.5 270 5.6 kN
4 9.3 360 7.0 kN
8
2 13.5 240 5.6 kN
124003 11.7 360 7.5 kN4 10.5 480 9.3 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.
- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
H-planeHorizontalPattern
E-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
24
-
8/11/2019 ANTENNAS RYMSA 2014
27/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band III 2 dipoles panelEspecially suitable for square mastsFor extreme weather conditions (radome protected)Model: AT13-227R
Frequency range 174-230 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 66 H-plane: 61
Polarization Vertical
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 2 kW
Maximum power handling RMS 1.4 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsRadomeReflector & dipolesIsolators
FiberglassAluminium
PTFE
Dimensions (W x D x H) 1210 x 520 x 1210 mm
Maximum wind speed 200 Km/h
Wind load (front) 1680 N (@160 km/h)
Wind load (lateral) 860 N (@160 km/h)
Weight 32 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 1600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load
(@160Km/h)
System
height(mm)
1
2 4.5 64 2.5 kN
12103 2.7 96 3.4 kN
4 1.5 128 3.9 kN
2
2 7.5 128 5.0 kN
28103 5.7 192 6.8 kN
4 4.5 256 7.8 kN
4
2 10.5 256 10.0 kN
60103 8.7 384 13.6 kN
4 7.5 512 15.6 kN
6
2 12.3 384 15.0 kN
92103 10.5 576 20.4 kN
4 9.3 768 23.4 kN
8
2 13.5 512 20.0 kN
124103 11.7 768 27.2 kN4 10.5 1024 31.2 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware
Antenna System Characteristics
TV
ANTENNA
S
YSTEMS
H-planeHorizontalPattern
E-planeVerticalPattern
25
-
8/11/2019 ANTENNAS RYMSA 2014
28/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V horizontal polarization panelEspecially suitable for square mastsModel: AT15-250
Frequency range 470-862 MHz
Peak gain 11.35 dB (ref. /2 dipole)
3 dB beam width E-plane: 61 H-plane: 26
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.1:1 typical ( 1.13:1 max)
Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW
Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW
Connector type DIN 7/16 EIA 7/8DIN
13/30EIA
1 5/8
PressurizationNon
pressurized
Gas barrier on input connector
Materials
Reflector & radiating elements
RadomeRadome colour
Aluminium(Stainless steel available on request)
FiberglassRed or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm
Maximum wind speed 220 km/h
Wind load (front) 743 N (@160 km/h)
Wind load (lateral) 258 N (@160 km/h)
Weight 10 Kg (model with DIN 7/16 connector)
Typical mounting Several combinations depending on theradiation pattern required (square typical)
Vertical spacing 1000 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160
km/h)
Systemheight
(mm)
1
2 8.4 20 1.1 kN
10003 6.6 30 1.6 kN
4 5.3 40 1.5 kN
2
2 11.4 40 2.2 kN
20003 9.6 60 3.2 kN
4 8.3 80 3.1 kN
4
2 14.4 80 4.4 kN
40003 12.6 120 6.4 kN
4 11.4 160 6.2 kN
6
2 16.1 120 6.6 kN
60003 14.4 180 9.6 kN
4 13.1 240 9.3 kN
8
2 17.4 160 8.8 kN
80003 15.6 240 12.8 kN
4 14.4 320 12.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with more
bays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
26
-
8/11/2019 ANTENNAS RYMSA 2014
29/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V vertical polarization panelEspecially suitable for square mastsModel: AT15-251
Frequency range 470-862 MHz
Peak gain 11.05 dB (ref. /2 dipole)
3 dB beam width E-plane: 27 H-plane: 62
Polarization Vertical
Impedance 50 Ohm
VSWR 1.15:1
Maximum power handling peak sync 1.4 KW 3.5 KW 4.2 KW 6.5 KW
Maximum power handling RMS 1 KW 2.5 KW 3 KW 4.5 KW
Connector type DIN 7/16 EIA 7/8DIN
13/30EIA
1 5/8
PressurizationNon
pressurized
Gas barrier on input connector
MaterialsReflector & radiating elementsRadomeRadome colour
AluminiumFiberglass
Red or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm
Maximum wind speed 220 Km/h
Wind load (front) 743 N (@160 Km/h)
Wind load (lateral) 258 N (@160 Km/h)
Weight 9 Kg (model with DIN 7/16 connector)
Typical mounting
Several combinations depending on the
radiation pattern required (square typical)Vertical spacing 1000 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load(@160
Km/h)
Systemheight
(mm)
1
2 8.1 18 1.1 kN
10003 6.3 27 1.6 kN
4 5.0 36 1.5 kN
2
2 11.1 36 2.2 kN
20003 9.3 54 3.2 kN
4 8.0 72 3.1 kN
4
2 14.1 96 4.4 kN
40003 12.3 108 6.4 kN
4 11.1 144 6.2 kN
6
2 15.8 108 6.6 KN
60003 14.1 162 9.6 kN
4 12.8 216 9.3 kN
8
2 17.1 144 8.8 kN
80003 15.3 216 12.8 kN
4 14.1 288 12.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.
- Wind load & weight figures withoutconsidering cables, splitters & hardware
Antenna System Characteristics
H-planeHorizontalPattern
E-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
27
-
8/11/2019 ANTENNAS RYMSA 2014
30/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V slant polarization panelEspecially suitable for square mastsModel: AT15-252
Frequency range 470-862 MHz
Peak gain 12.8 dB (ref. /2 dipole)
3 dB beam width E-plane: 61 H-plane: 26
Polarization Slant (typical 80%H / 20%V)
Impedance 50 Ohm
VSWR 1.1:1 typical ( 1.13:1 max)
Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW
Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW
Connector type DIN 7/16 EIA 7/8DIN
13/30EIA
1 5/8
Pressurization
Non
pressurized
Gas barrier on input
connector
The above specifications correspond to the typical 80%H / 20%V polarization ratio
Materials
Reflector & radiatingelementsRadomeRadome colour
Aluminium(Stainless steel available on request)
FiberglassRed or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm
Maximum wind speed 220 km/h
Wind load (front) 743 N (@160 km/h)
Wind load (lateral) 215 N (@160 km/h)
Weight 10 kg (model with DIN 7/16 connector)
Typical mounting Square arrangement tower
Vertical spacing 1100 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160km/h)
Systemheight(mm)
1
2 9.8 20 1.0 kN
10943 8.1 30 1.2 kN
4 6.8 40 1.4 kN
2
2 12.8 40 1.9 kN
21943 11.1 60 2.3 kN
4 9.8 80 2.8 kN
4
2 15.8 80 3.8 kN
43943 14.1 120 4.7 kN
4 12.8 160 5.7 kN
6
2 17.6 120 5.8 kN
65943 15.8 180 7.0 kN
4 14.6 240 8.5 kN
8
2 18.9 160 7.7 kN
87943 17.1 240 9.4 kN
4 15.8 320 11.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder
losses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
E-planeHorizontalPattern
H-planeVerticalPattern
TV
ANTENNA
S
YSTEMS
28
-
8/11/2019 ANTENNAS RYMSA 2014
31/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V circular/elliptical polarization panelEspecially suitable for square mastsModel: AT15-245
Frequency range 470-722 MHz
Gain (Total field) 11.1 dB (ref. /2 dipole)
Gain (linear component for circular polariz.) 8.1 dBd (H. Pol.) 8.1 dBd (V. Pol.)
3 dB beam width Horizontal: 61 Vertical: 27
PolarizationCircular or Elliptical (supplied by an
integrated hybrid coupler)
Polarization ratio options50%H /50%V; 60%H /40%V;70%H /30%V; 80%H /20%V
Impedance 50 Ohm
VSWR 1.13:1
Maximum power handling RMS 1 kW 2.5 kW
Connector type DIN 7/16 EIA 7/8
Pressurization Non presurizedGas barrier on input
connector
MaterialsReflector & radiating elementsRadomeRadome colour
AluminiumFiberglass
Red or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm
Maximum wind speed 220 km/h
Wind load (front) 743 N (@160 km/h)
Wind load (lateral) 258 N (@160 km/h)
Weight 13 kg including hybrid
Typical mounting
Several combinations depending on the
radiation pattern required (square typical)Vertical spacing 1000 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(kg)
Wind load(@160km/h)
Systemheight(mm)
1
2 8.1 26 1.1 kN
10003 6.4 39 1.6 kN
4 5.2 52 1.5 kN
22 11.1 52 2.2 kN
20003 9.4 78 3.2 kN
4 8.2 104 3.1 kN
4
2 14.4 104 4.4 kN
40003 12.4 156 6.4 kN
4 11.2 208 6.2 kN
6
2 15.9 156 6.6 kN
60003 14.1 234 9.6 kN
4 13.0 312 9.3 kN
8
2 17.2 208 8.8 kN
80003 15.4 312 12.8 kN
4 14.2 416 12.4 kN
The panel can be supplied without the input hybrid thus displaying two connectors (DIN7/16 or EIA 7/8"), one feeding an HPOL array and one feeding a VPOL array.
Electrical Specifications
Mechanical & Environmental Specifications
Antenna System Characteristics
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.
- Null fill, beam tilt, harness & feeder losses
NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
HorizontalPattern
VerticalPattern
TV
ANTENNA
S
YSTEMS
Optional
29
-
8/11/2019 ANTENNAS RYMSA 2014
32/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V low power superturnstile antennas
Model: AT15-801 / 802
UHF Superturnstile Antennas for TV applications offer a broadband omnidirectional radiation pattern withexcellent circularity, combined with a minimum wind load impact on the supporting mast.
These antenna systems are ideal for top-mounting, and they are supplied ready for installation, fullyassembled and enclosed in a GRP cylinder.
AT15-801 AT15-802
Frequency range 470-860 MHzVSWR 1.15:1
Impedance 50 Ohm
Polarization Horizontal
Peak gain (ref. /2 dipole)1 Bay 2 Bays
5 dBd 8 dBd
3 dB vertical beam width (mid-band) 25 11Maximum power handling RMS 2 kW 4 kW
Connector type (1) EIA 7/8" female EIA 1 5/8" female
Pressurization Not pressurized
Materials
Batwings Aluminium
Connectors Aluminium and brassIsolators PTFE
Radome FiberglassRadome dimensions ( X H) 318 x 1200 mm 318 x 2500 mm
Weight 26 Kg 46 Kg
Wind Load @ 160 Km/h 323 N 726 NMaximum wind speed 220 km/h
Grounding DC grounded
Temperature range -40C to +70CHumidity 100%
Electrical Specifications
Mechanical & Environmental Specifications
TV
ANTENNA
S
YSTEMS
NOTES:
(1) Other connector types underrequest.
Others gain values and power handlingcan be supplied. Please, ask RYMSA RF.
AT15-801 Superturnstile antenna.
30
-
8/11/2019 ANTENNAS RYMSA 2014
33/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band IV/V slot antennas
Suitable for top-mount or side-mount
Series: AT15-9XX
Slot antennas for UHF TV applications are a neat way to provide broadcasting solutions minimizing the
visual and mechanical impact over its supporting structure. These antennas are constructed fully enclosedin a cylindrical fiberglass radome, featuring very reduced weight and windload figures, while keepingoptimum radioelectrical performances under most severe environmental conditions.
They are ready for installation in top-mount and side-mount configurations, offering a very wide scope ofradiating characteristics depending on the polarization (horizontal, circular, elliptical), on the shape of thehorizontal radiation pattern, and on the vertical aperture.
AT15-9XX series cover all the possible needs from low power/ low gain solutions up to 16 KW RMS andhigh gain.
Frequency range 470-806 MHz
Multichannel versions available Yes
VSWR 1.1:1 across a single channel
Polarization Horizontal / Circular / Elliptical
Beam tilt & Null Fill Customized under request
Impedance 50 Ohm
Number of bays From 4 to 24 bays
Maximum power handling peak sync From 500 W to 25 KW
Maximum power handling RMS From 350 W to 16 KW
Connector type EIA 1 5/8 or EIA 3 1/8
Radome Fiberglass (included)
Height (for 4 bays and 24 bays) From 2400 mm to 13060 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Electrical Specifications
Mechanical & Environmental Specifications
TV
ANTENNA
S
YSTEMS
NOTES:
Note: Mechanical data supplied corresponds
to channel 30 FCC. Ask RYMSA RF forothers horizontal patterns
E-planeHorizontalPattern650 MHz
E-planeHorizontalPattern650 MHz
E-planeHorizontalPattern650 MHz
31
-
8/11/2019 ANTENNAS RYMSA 2014
34/132
32
-
8/11/2019 ANTENNAS RYMSA 2014
35/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Radio antenna systems
RYMSA RF manufactures a broad range of antennas for the transmission of radio signals in B-II (FM &IBOC) and B-III (DAB).
Antenna systems are currently formed by stacking single radiating elements properly disposed and fed withthe adequate phase and amplitude. These unitary radiators can be either directional, as those based on panel orcavity solutions, or dipole-style providing omni or quasi-omnidirectional performances.
RYMSA RF designs the single antenna elements succeeding in the challenge of displaying the necessaryruggedness minimizing wind load and weight, and ready to remain weatherproof for a long life withstanding anysort of extreme climatic conditions. This versatility allows using them also individually for simple needs such as relaysites.
Power dividers and interconnecting lines (both flexible and rigid), are utilized to build the distributionnetwork which transports the signals from the main transmission line up to each radiating element. The veryassorted range of different models of these products manufactured by RYMSA RF ensures the capability of satisfying
any possible request, from simple arrays to complex high power antenna systems.
RYMSA RF AT12 series offers an extensive range of radiating elements for applications in FM and IBOCradio. Digital radio needs in DAB B-III are covered by AT13 (included at TV Antenna Systems section of this catalog)and AT14 series.
hese arrays are the most versatile solution to implement radiation
patterns customized to any particular coverage requirement. Ideal for
middle to big masts and multichannel operation, they also allow reaching
the high power ratings frequently required in those situations. They can beclassified as follows:
FM and IBOC: horizontal, vertical and circular polarization panels are
provided with several input connector sizes to reach any requested
power handling. This assorted range is complemented by the back
cavity model for circular polarization. Elliptical polarization is easily
achievable as well. Linearly polarized unitary antennas have one input
connector, whilst the circularly polarized ones display two and four
connectors.
Triangular, square and multi-panel arrays can be easily implemented
with RYMSA RF AT12 series directional antennas.
DAB: AT13 series panels, included in this catalog at the TV Antenna
Systems section, are available for the transmission of digital radio in B-
III. A special panel model, with reduced bandwidth just for the DAB
range is also available.
FM circularly polarized antenna system builtas an array of back-cavity unitary radiators
FM panel antenna for triangular mastassembled in-plant for factory tests
Panel and Cavity Systems
RADIO
ANTENNA
SYSTEMS
33
-
8/11/2019 ANTENNAS RYMSA 2014
36/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99
Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Radio antenna systems
These solutions are based on the vertical stacking of dipole-style
elementary antennas. These systems offer less radiation pattern versatility
than panels, but their reduced cost, weight and wind load makes them an
excellent alternative to them. As in previous cases, RYMSA RF models are
ranging from low to very high power applications. They can be classified as
follows:
FM and IBOC: vertically and circularly polarized antennas, available with
broadband features and also optimized to reduced bandwidths. Elliptical
polarization is also provided. To form the arrays, branch feed lines are
used, allowing the adjustment of the spacing between bays to customize
the vertical pattern and minimize downward radiation. Several models
are available for extreme weather conditions and in a lighter version as
well.
DAB: vertical polarization dipoles are available, with similar features than
their FM counterparts.FM circularly polarized omnidirectional
array
Omnidirectional and Quasi-omni arrays
RADIO
ANTENNA
SYSTEMS
34
-
8/11/2019 ANTENNAS RYMSA 2014
37/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panelEspecially suitable for triangular mastsModel: AT10-221
Frequency range 65.9-74 /87.5-108 MHz
Peak gain (ref. /2 dipole)65.9-74 MHz
5.17 dB87.5-108 MHz
4.97 dB
3 dB beam widthE-plane: 71
H-plane: 108E-plane: 73
H-plane: 106
Polarization Vertical
Impedance 50 Ohm
VSWR67-71 MHz1.25:1
FM1.4:1
Maximum power handling 9 kW 7 kW
Connector type DIN 13/30
Pressurization Non pressurized
MaterialsStructureFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1780 x 1250 x 2500 mm
Maximum wind speed 200 km/h
Wind load (front) 1765 N (@160 km/h)
Wind load (lateral) 910 N (@160 km/h)
Weight 126 kg
Typical mounting Triangular arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 2600 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number
ant.per bay
Peak gain
(dBd)66-74 MHz
Peak gain(dBd)
87,5-108MHz
Weight(kg)
Windload
(@160Km/h)
System
height(mm)
1 2 2,17 1,97 252 3,4 kN 25003 0,37 0,17 378 5,1 kN
22 5,17 4,97 504 6,9 kN
51003 3,37 3,17 756 10,2 kN
42 8,17 7,97 1008 13,7 kN
103003 6,37 6,17 1512 20,4 kN
62 9,97 9,77 1512 20,6 kN
155003 8,17 7,97 2268 30,6 kN
82 11,17 10,97 2016 27,5 kN
207003 9,37 9,17 3024 40,8 kN
Electrical Specifications
Mechanical & Environmental Specifications
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
35
-
8/11/2019 ANTENNAS RYMSA 2014
38/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II dipole antennaSide-mount vertical polarizationModel: AT12-522
Frequency range 87.5-108 MHz
Peak gain0 dB (ref. /2 dipole, free space)
1.75 dB (ref. /2 dipole, with pole)
3 dB beam width E-plane: 75 H-plane: 220
Polarization Vertical
Impedance 50 Ohm
VSWR 1.3:1
Maximum power handling 2 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsDipoleIsolators
Stainless steelPTFE
Dimensions (W x D x H) 85 x 1000 x 1340 mm
Maximum wind speed 200 Km/h
Wind load 165 N (@160 km/h)
Weight 10 kg
Clamp type To 60 80 mm pipe
Vertical spacing 0.8 0.9typical
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160km/h)
Systemheight(mm)
1 1 1.8 10 0.17 kN 1340
2 1 4.8 20 0.34 kN 3949
4 1 7.8 40 0.68 kN 9166
6 1 9.5 60 1.02 kN 14383
8 1 10.8 80 1.36 kN 19601
10 1 11.8 100 1.70 kN 2482112 1 12.6 120 2.04 kN 30039
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED
- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
H-planeHorizontalPattern
E-planeVerticalPattern
36
-
8/11/2019 ANTENNAS RYMSA 2014
39/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II dipole antennaSide-mount vertical polarizationFor extreme weather conditionsModel: AT12-512
Frequency range 87.5-108 MHz
Peak gain1.13 dB (ref. /2 dipole, free space)3.08 dB (ref. /2 dipole, with pole)
3 dB beam width E-plane: 75 H-plane: 169
Polarization Vertical
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling 2.5 kW 5 kW 7 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsDipoleFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 200 x 1105 x 1440 mm
Maximum wind speed 200 km/h
Wind load 350 N (@160 km/h)
Weight 30 kg
Clamp type To 80 115 mm pipe
Vertical spacing 0.8 0.9typical
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160 km/h)
Systemheight(mm)
1 1 3.1 30 0.4 kN 1440
2 1 6.1 60 0.7 kN 4049
4 1 9.1 120 1.4 kN 9266
6 1 10.9 180 2.1 kN 144838 1 12.1 240 2.8 kN 19701
10 1 13.1 300 3.5 kN 24917
12 1 13.9 360 4.2 kN 30135
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feederlosses NOT INCLUDED
- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
H-planeHorizontalPattern
E-planeVerticalPattern
37
-
8/11/2019 ANTENNAS RYMSA 2014
40/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panelEspecially suitable for square mastsModel: AT12-220
Frequency range 87.5-108 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 70 H-plane: 55
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling 2.5 kW 5 kW 7 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1700 x 781 x 2214 mm
Maximum wind speed 200 km/h
Wind load (front) 1626 N (@160 km/h)
Wind load (lateral) 740 N (@160 km/h)
Weight 58 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 6.0 116 2.4 kN
22143 4.2 174 3.1 kN
4 3.0 232 3.9 kN
22 9.0 232 4.7 kN
54143 7.2 348 6.2 kN
4 6.0 464 7.8 kN
4
2 12.0 464 9.5 kN
118143 10.3 696 12.4 kN
4 9.0 928 15.7 kN
6
2 13.8 696 14.2 kN
182143 12.0 1044 18.6 kN
4 10.8 1392 23.5 kN
8
2 15.0 928 18.9 kN
246143 13.3 1392 24.8 kN
4 12.0 1856 31.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
E-planeHorizontalPattern
H-planeVerticalPattern
38
-
8/11/2019 ANTENNAS RYMSA 2014
41/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT12-222
Frequency range 87.5-108 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 70 H-plane: 55
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling 2.5 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelABS / MMA UVA high protection
Dimensions (W x D x H) 1700 x 781 x 2214 mm
Maximum wind speed 200 km/h
Wind load (front) 1300 N (@160 km/h)
Wind load (lateral) 592 N (@160 km/h)
Weight 36 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mmGrounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load
(@160km/h)
System
height(mm)
1
2 6.0 72 1.9 kN
22143 4.2 108 2.5 kN
4 3.0 144 3.1 kN
22 9.0 144 3.8 kN
54143 7.2 216 5.0 kN
4 6.0 288 6.2 kN
4
2 12.0 288 7.6 kN
118143 10.3 432 9.9 kN
4 9.0 576 12.6 kN
6
2 13.8 432 11.4 kN
182143 12.0 648 14.9 kN
4 10.8 864 18.8 kN
8
2 15.0 576 15.1 kN
246143 13.3 864 19.8 kN4 12.0 1152 25.1 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
E-planeHorizontalPattern
H-planeVerticalPattern
39
-
8/11/2019 ANTENNAS RYMSA 2014
42/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panelEspecially suitable for triangular mastsModel: AT12-223
Frequency range 87.5-108 MHz
Peak gain 7.0 dB (ref. /2 dipole)
3 dB beam width E-plane: 78 H-plane: 60
Polarization Horizontal
Impedance 50 Ohm
VSWR 1.22:1
Maximum power handling 2.5 kW 5 kW 7 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
Pressurization Non pressurizedGas barrier oninput connector
MaterialsStructureFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 1700 x 800 x 2214 mm
Maximum wind speed 200 km/h
Wind load (front) 1515 N (@160 km/h)
Wind load (lateral) 796 N (@160 km/h)
Weight 65 kg
Typical mounting Triangular arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mmGrounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)
Wind load(@160km/h)
Systemheight(mm)
12 4.0 130 2.9 kN
22143 2.2 195 4.4 kN
2
2 7.0 260 5.8 kN
54143 5.2 390 8.8 kN
42 10.0 520 11.6 kN
118143 8.3 780 17.6 kN
62 11.8 780 17.4 kN
182143 10.0 1170 26.5 kN
82 13.0 1040 23.1 kN
246143 11.3 1560 35.3 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
E-planeHorizontalPattern
H-planeVerticalPattern
40
-
8/11/2019 ANTENNAS RYMSA 2014
43/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panel
Especially suitable for square masts
Model: AT12-221
Frequency range 87.5-108 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 70 H-plane: 55
Polarization Vertical
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling 2.5 kW 5 kW 7 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30
PressurizationNon
pressurizedGas barrier on input
connector
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelFiberglass
Dimensions (W x D x H) 2214 x 781 x 1700 mm
Maximum wind speed 200 km/h
Wind load (front) 1626 N (@160 km/h)
Wind load (lateral) 740 N (@160 km/h)
Weight 58 kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mmGrounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 4.5 116 2.4 kN
17003 2.7 174 3.1 kN
4 1.5 232 3.9 kN
2
2 7.5 232 4.7 kN
49003 5.7 348 6.2 kN
4 4.5 464 7.8 kN
4
2 10.5 464 9.5 kN
113003 8.7 696 12.4 kN
4 7.5 928 15.7 kN
6
2 12.3 696 14.2 kN
177003 10.5 1044 18.6 kN
4 9.3 1392 23.5 kN
8
2 13.5 928 18.9 kN
241003 11.7 1392 24.8 kN
4 10.5 1856 31.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:- Table supplies data up to 8 bays onlyfor simplification purposes; systemswith more bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without
considering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
H-planeHorizontalPattern
E-planeVerticalPattern
41
-
8/11/2019 ANTENNAS RYMSA 2014
44/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT12-227
Frequency range 87.5-108 MHz
Peak gain 7.5 dB (ref. /2 dipole)
3 dB beam width E-plane: 70 H-plane: 55
Polarization Vertical
Impedance 50 Ohm
VSWR 1.2:1
Maximum power handling 2.5 kW
Connector type DIN 7/16
Pressurization Non pressurized
MaterialsReflector & dipolesFeed points radome
Hot dip galvanized steelABS / MMA UVA high protection
Dimensions (W x D x H) 2214 x 781 x 1700 mm
Maximum wind speed 200 Km/h
Wind load (front) 1300 N (@160 km/h)
Wind load (lateral) 540 N (@160 km/h)
Weight 36 Kg
Typical mounting Square arrangement tower
Clamp type To 80 115 mm pipe
Vertical spacing 3200 mm
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Number
of Bays
Number ant.
per bay
Peak gain
(dBd)
Weight
(Kg)
Wind load(@160Km/h)
Systemheight(mm)
1
2 4.5 72 1.9 kN
17003 2.7 108 2.5 kN
4 1.5 144 3.1 kN
22 7.5 144 3.8 kN
49003 5.7 216 5.0 kN4 4.5 288 6.2 kN
4
2 10.5 288 7.6 kN
113003 8.7 432 9.9 kN4 7.5 576 12.6 kN
6
2 12.3 432 11.4 kN
177003 10.5 648 14.9 kN
4 9.3 864 18.8 kN
8
2 13.5 576 15.1 kN
241003 11.7 864 19.8 kN
4 10.5 1152 25.1 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES:
- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.
Antenna System Characteristics
RADIO
ANTENNA
SYSTEMS
H-planeHorizontalPattern
E-planeVerticalPattern
42
-
8/11/2019 ANTENNAS RYMSA 2014
45/132
RYMSA RF will reserve the right to make any changes without notice.
Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)
Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com
Band II FM circular dipoles antennaSide-mount circular polarizationModel: AT12-200
Frequency range 87.5-108 MHz
Peak gain 0.2 dB (ref. /2 dipole, 50 mm pole)
3 dB beam width Horizontal: 360 Vertical: 86
Polarization Circular
Impedance 50 Ohm
VSWR 1.1:1
Bandwidth 500 KHz
Maximum power handling 500 W
Connector type N
Pressurization Non pressurized
Materials Stainless steel
Dimensions (W x D x H) 500 x 500 x 750 mm
Maximum wind speed 200 km/h
Wind load 200 N (@160 km/h)
Weight 5 kg
Clamp type To 25 75 mm pipe
Vertical spacing 0.8 0.9 typical
Grounding DC grounded
Temperature range -40C to +80C
Humidity 100%
Numberof Bays
Number ant.per bay
Peak gain(dBd)
Weight(kg)